FAILED: patch "[PATCH] drm/amd/display: Remove OTG DIV register write for Virtual" failed to apply to 6.1-stable tree
[email protected]
maintainerThe patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 5d04d13954479292dd45e38a46dfa31abb8dc2e0
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2023051320-grumbling-usher-ecf0@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
5d04d1395447 ("drm/amd/display: Remove OTG DIV register write for Virtual signals.") 3b214bb7185d ("drm/amd/display: fix k1 k2 divider programming for phantom streams") 368307cef69c ("drm/amd/display: Include virtual signal to set k1 and k2 values")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 5d04d13954479292dd45e38a46dfa31abb8dc2e0 Mon Sep 17 00:00:00 2001
From: Saaem Rizvi <[email protected]>
Date: Mon, 27 Feb 2023 18:55:07 -0500
Subject: [PATCH] drm/amd/display: Remove OTG DIV register write for Virtual
signals.
[WHY]
Hot plugging and then hot unplugging leads to k1 and k2 values to change, as signal is detected as a virtual signal on hot unplug. Writing these values to OTG_PIXEL_RATE_DIV register might cause primary display to blank (known hw bug).
[HOW]
No longer write k1 and k2 values to register if signal is virtual, we have safe guards in place in the case that k1 and k2 is unassigned so that an unknown value is not written to the register either.
drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c +1 -1
@@ -1111,7 +1111,7 @@ unsigned int dcn32_calculate_dccg_k1_k2_values(struct pipe_ctx *pipe_ctx, unsign *k2_div =PIXEL_RATE_DIV_BY_2 ; else *k2_div =PIXEL_RATE_DIV_BY_4 ; - }else if (dc_is_dp_signal (stream->signal) ||dc_is_virtual_signal (stream->signal)) { + }else if (dc_is_dp_signal (stream->signal)) {if (two_pix_per_container) { *k1_div =PIXEL_RATE_DIV_BY_1 ; *k2_div =PIXEL_RATE_DIV_BY_2 ;