Cleanup pata_parport code

index 1c5035a09554..81b6b19fa99f 100644
@@ -1,11 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /* 
-	bpck.c	(c) 1996-8  Grant R. Guenther <[email protected]>
-		            Under the terms of the GNU General Public License.
-
-	bpck.c is a low-level protocol driver for the MicroSolutions 
-	"backpack" parallel port IDE adapter.  
-
-*/
+ * (c) 1996-8  Grant R. Guenther <[email protected]>
+ *
+ * bpck.c is a low-level protocol driver for the MicroSolutions
+ * "backpack" parallel port IDE adapter.
+ */
 
 #include <linux/module.h>
 #include <linux/init.h>

@@ -29,36 +28,36 @@
 
 #define j44(l,h)     (((l>>3)&0x7)|((l>>4)&0x8)|((h<<1)&0x70)|(h&0x80))
 
-/* cont = 0 - access the IDE register file 
-   cont = 1 - access the IDE command set 
-   cont = 2 - use internal bpck register addressing
-*/
-
+/*
+ * cont = 0 - access the IDE register file
+ * cont = 1 - access the IDE command set
+ * cont = 2 - use internal bpck register addressing
+ */
 static int  cont_map[3] = { 0x40, 0x48, 0 };
 
 static int bpck_read_regr(struct pi_adapter *pi, int cont, int regr)
-
-{       int r, l, h;
+{
+	int r, l, h;
 
 	r = regr + cont_map[cont];
 
 	switch (pi->mode) {
-
-	case 0: w0(r & 0xf); w0(r); t2(2); t2(4);
+	case 0:
+		w0(r & 0xf); w0(r); t2(2); t2(4);
 	        l = r1();
-        	t2(4);
-        	h = r1();
-        	return j44(l,h);
-
-	case 1: w0(r & 0xf); w0(r); t2(2);
-	        e2(); t2(0x20);
+		t2(4);
+		h = r1();
+		return j44(l, h);
+	case 1:
+		w0(r & 0xf); w0(r); t2(2);
+		e2(); t2(0x20);
 		t2(4); h = r0();
-	        t2(1); t2(0x20);
-	        return h;
-
+		t2(1); t2(0x20);
+		return h;
 	case 2:
 	case 3:
-	case 4: w0(r); w2(9); w2(0); w2(0x20);
+	case 4:
+		w0(r); w2(9); w2(0); w2(0x20);
 		h = r4();
 		w2(0);
 		return h;

@@ -68,20 +67,18 @@ static int bpck_read_regr(struct pi_adapter *pi, int cont, int regr)
 }	
 
 static void bpck_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
-
-{	int	r;
+{
+	int r;
 
         r = regr + cont_map[cont];
 
 	switch (pi->mode) {
-
 	case 0:
 	case 1: w0(r);
 		t2(2);
 		w0(val);
 		o2(); t2(4); t2(1);
 		break;
-
 	case 2:
 	case 3:
 	case 4: w0(r); w2(9); w2(0);

@@ -97,96 +94,121 @@ static void bpck_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
 #define RR(r)		(bpck_read_regr(pi,2,r))
 
 static void bpck_write_block(struct pi_adapter *pi, char *buf, int count)
-
-{	int i;
+{
+	int i;
 
 	switch (pi->mode) {
 
-	case 0: WR(4,0x40);
+	case 0:
+		WR(4, 0x40);
 		w0(0x40); t2(2); t2(1);
-		for (i=0;i<count;i++) { w0(buf[i]); t2(4); }
-		WR(4,0);
+		for (i = 0; i < count; i++) {
+			w0(buf[i]);
+			t2(4);
+		}
+		WR(4, 0);
 		break;
 
-	case 1: WR(4,0x50);
-                w0(0x40); t2(2); t2(1);
-                for (i=0;i<count;i++) { w0(buf[i]); t2(4); }
-                WR(4,0x10);
+	case 1:
+		WR(4, 0x50);
+		w0(0x40); t2(2); t2(1);
+		for (i = 0; i < count; i++) {
+			w0(buf[i]);
+			t2(4);
+		}
+		WR(4, 0x10);
 		break;
 
-	case 2: WR(4,0x48);
+	case 2:
+		WR(4, 0x48);
 		w0(0x40); w2(9); w2(0); w2(1);
-		for (i=0;i<count;i++) w4(buf[i]);
+		for (i = 0; i < count; i++)
+			w4(buf[i]);
 		w2(0);
-		WR(4,8);
+		WR(4, 8);
 		break;
 
-        case 3: WR(4,0x48);
-                w0(0x40); w2(9); w2(0); w2(1);
-                for (i=0;i<count/2;i++) w4w(((u16 *)buf)[i]);
-                w2(0);
-                WR(4,8);
-                break;
+	case 3:
+		WR(4, 0x48);
+		w0(0x40); w2(9); w2(0); w2(1);
+		for (i = 0; i < count / 2; i++)
+			w4w(((u16 *)buf)[i]);
+		w2(0);
+		WR(4, 8);
+		break;
  
-        case 4: WR(4,0x48);
-                w0(0x40); w2(9); w2(0); w2(1);
-                for (i=0;i<count/4;i++) w4l(((u32 *)buf)[i]);
-                w2(0);
-                WR(4,8);
-                break;
+	case 4:
+		WR(4, 0x48);
+		w0(0x40); w2(9); w2(0); w2(1);
+		for (i = 0; i < count / 4; i++)
+			w4l(((u32 *)buf)[i]);
+		w2(0);
+		WR(4, 8);
+		break;
  	}
 }
 
 static void bpck_read_block(struct pi_adapter *pi, char *buf, int count)
-
-{	int i, l, h;
+{
+	int i, l, h;
 
 	switch (pi->mode) {
 
-      	case 0: WR(4,0x40);
+	case 0:
+		WR(4, 0x40);
 		w0(0x40); t2(2);
-		for (i=0;i<count;i++) {
-		    t2(4); l = r1();
-		    t2(4); h = r1();
-		    buf[i] = j44(l,h);
+		for (i = 0; i < count; i++) {
+			t2(4); l = r1();
+			t2(4); h = r1();
+			buf[i] = j44(l, h);
 		}
-		WR(4,0);
+		WR(4, 0);
 		break;
 
-	case 1: WR(4,0x50);
+	case 1:
+		WR(4, 0x50);
 		w0(0x40); t2(2); t2(0x20);
-      	        for(i=0;i<count;i++) { t2(4); buf[i] = r0(); }
-	        t2(1); t2(0x20);
-	        WR(4,0x10);
+		for (i = 0; i < count; i++) {
+			t2(4);
+			buf[i] = r0();
+		}
+		t2(1); t2(0x20);
+		WR(4, 0x10);
 		break;
 
-	case 2: WR(4,0x48);
+	case 2:
+		WR(4, 0x48);
 		w0(0x40); w2(9); w2(0); w2(0x20);
-		for (i=0;i<count;i++) buf[i] = r4();
+		for (i = 0; i < count; i++)
+			buf[i] = r4();
 		w2(0);
-		WR(4,8);
+		WR(4, 8);
 		break;
 
-        case 3: WR(4,0x48);
-                w0(0x40); w2(9); w2(0); w2(0x20);
-                for (i=0;i<count/2;i++) ((u16 *)buf)[i] = r4w();
-                w2(0);
-                WR(4,8);
-                break;
+	case 3:
+		WR(4, 0x48);
+		w0(0x40); w2(9); w2(0); w2(0x20);
+		for (i = 0; i < count / 2; i++)
+			((u16 *)buf)[i] = r4w();
+		w2(0);
+		WR(4, 8);
+		break;
 
-        case 4: WR(4,0x48);
-                w0(0x40); w2(9); w2(0); w2(0x20);
-                for (i=0;i<count/4;i++) ((u32 *)buf)[i] = r4l();
-                w2(0);
-                WR(4,8);
-                break;
+	case 4:
+		WR(4, 0x48);
+		w0(0x40); w2(9); w2(0); w2(0x20);
+		for (i = 0; i < count / 4; i++)
+			((u32 *)buf)[i] = r4l();
+		w2(0);
+		WR(4, 8);
+		break;
 
 	}
 }
 
 static int bpck_probe_unit(struct pi_adapter *pi)
-
-{	int o1, o0, f7, id;
+{
+	int o1, o0, f7, id;
 	int t, s;
 
 	id = pi->unit;

@@ -198,7 +220,10 @@ static int bpck_probe_unit(struct pi_adapter *pi)
 	t2(8); t2(8); t2(8);
 	t2(2); t = r1()&0xf8;
 	f7 = ((id % 8) == 7);
-	if ((f7) || (t != o1)) { t2(2); s = r1()&0xf8; }
+	if ((f7) || (t != o1)) {
+		t2(2);
+		s = r1() & 0xf8;
+	}
 	if ((t == o1) && ((!f7) || (s == o1)))  {
 		w2(0x4c); w0(o0);
 		return 0;	

@@ -208,99 +233,110 @@ static int bpck_probe_unit(struct pi_adapter *pi)
 }
 	
 static void bpck_connect(struct pi_adapter *pi)
-
-{       pi->saved_r0 = r0();
+{
+	pi->saved_r0 = r0();
 	w0(0xff-pi->unit); w2(4); w0(pi->unit);
 	t2(8); t2(8); t2(8); 
 	t2(2); t2(2);
 	
 	switch (pi->mode) {
-
-	case 0: t2(8); WR(4,0);
+	case 0:
+		t2(8); WR(4, 0);
 		break;
-
-	case 1: t2(8); WR(4,0x10);
+	case 1:
+		t2(8); WR(4, 0x10);
 		break;
-
 	case 2:
-        case 3:
-	case 4: w2(0); WR(4,8);
+	case 3:
+	case 4:
+		w2(0); WR(4, 8);
 		break;
-
 	}
 
 	WR(5,8);
 
-/*	if (pi->devtype == PI_PCD) {	possibly wrong, purpose unknown */
-		WR(0x46,0x10);		/* fiddle with ESS logic ??? */
-		WR(0x4c,0x38);
-		WR(0x4d,0x88);
-		WR(0x46,0xa0);
-		WR(0x41,0);
-		WR(0x4e,8);
-/*	}*/
+	/*
+	 * Possibly wrong, purpose unknown (fiddle with ESS logic ???)
+	 * if (pi->devtype == PI_PCD) {
+	 */
+	WR(0x46, 0x10);
+	WR(0x4c, 0x38);
+	WR(0x4d, 0x88);
+	WR(0x46, 0xa0);
+	WR(0x41, 0);
+	WR(0x4e, 8);
+	/* } */
 }
 
 static void bpck_disconnect(struct pi_adapter *pi)
-
-{	w0(0); 
-	if (pi->mode >= 2) { w2(9); w2(0); } else t2(2);
+{
+	w0(0);
+	if (pi->mode >= 2) {
+		w2(9); w2(0);
+	} else {
+		t2(2);
+	}
 	w2(0x4c); w0(pi->saved_r0);
 } 
 
 static void bpck_force_spp(struct pi_adapter *pi)
+{
+	/* This fakes the EPP protocol to turn off EPP ... */
+	pi->saved_r0 = r0();
+	w0(0xff-pi->unit); w2(4); w0(pi->unit);
+	t2(8); t2(8); t2(8);
+	t2(2); t2(2);
 
-/* This fakes the EPP protocol to turn off EPP ... */
-
-{       pi->saved_r0 = r0();
-        w0(0xff-pi->unit); w2(4); w0(pi->unit);
-        t2(8); t2(8); t2(8); 
-        t2(2); t2(2);
-
-        w2(0); 
-        w0(4); w2(9); w2(0); 
-        w0(0); w2(1); w2(3); w2(0);     
-        w0(0); w2(9); w2(0);
-        w2(0x4c); w0(pi->saved_r0);
+	w2(0);
+	w0(4); w2(9); w2(0);
+	w0(0); w2(1); w2(3); w2(0);
+	w0(0); w2(9); w2(0);
+	w2(0x4c); w0(pi->saved_r0);
 }
 
 #define TEST_LEN  16
 
 static int bpck_test_proto(struct pi_adapter *pi)
-
-{	int i, e, l, h, om;
+{
+	int i, e, l, h, om;
 	char buf[TEST_LEN];
 
 	bpck_force_spp(pi);
 
 	switch (pi->mode) {
 
-	case 0: bpck_connect(pi);
-		WR(0x13,0x7f);
+	case 0:
+		bpck_connect(pi);
+		WR(0x13, 0x7f);
 		w0(0x13); t2(2);
-		for(i=0;i<TEST_LEN;i++) {
-                    t2(4); l = r1();
-                    t2(4); h = r1();
-                    buf[i] = j44(l,h);
+		for (i = 0; i < TEST_LEN; i++) {
+			t2(4); l = r1();
+			t2(4); h = r1();
+			buf[i] = j44(l, h);
 		}
 		bpck_disconnect(pi);
 		break;
 
-        case 1: bpck_connect(pi);
-		WR(0x13,0x7f);
-                w0(0x13); t2(2); t2(0x20);
-                for(i=0;i<TEST_LEN;i++) { t2(4); buf[i] = r0(); }
-                t2(1); t2(0x20);
+	case 1:
+		bpck_connect(pi);
+		WR(0x13, 0x7f);
+		w0(0x13); t2(2); t2(0x20);
+		for (i = 0; i < TEST_LEN; i++) {
+			t2(4);
+			buf[i] = r0();
+		}
+		t2(1); t2(0x20);
 		bpck_disconnect(pi);
 		break;
 
 	case 2:
 	case 3:
-	case 4: om = pi->mode;
+	case 4:
+		om = pi->mode;
 		pi->mode = 0;
 		bpck_connect(pi);
-		WR(7,3);
-		WR(4,8);
+		WR(7, 3);
+		WR(4, 8);
 		bpck_disconnect(pi);
 
 		pi->mode = om;

@@ -308,34 +344,44 @@ static int bpck_test_proto(struct pi_adapter *pi)
 		w0(0x13); w2(9); w2(1); w0(0); w2(3); w2(0); w2(0xe0);
 
 		switch (pi->mode) {
-		  case 2: for (i=0;i<TEST_LEN;i++) buf[i] = r4();
-			  break;
-		  case 3: for (i=0;i<TEST_LEN/2;i++) ((u16 *)buf)[i] = r4w();
-                          break;
-		  case 4: for (i=0;i<TEST_LEN/4;i++) ((u32 *)buf)[i] = r4l();
-                          break;
+		case 2:
+			for (i = 0; i < TEST_LEN; i++)
+				buf[i] = r4();
+			break;
+		case 3:
+			for (i = 0; i < TEST_LEN / 2; i++)
+				((u16 *)buf)[i] = r4w();
+			break;
+		case 4:
+			for (i = 0; i < TEST_LEN / 4; i++)
+				((u32 *)buf)[i] = r4l();
+			break;
 		}
 
 		w2(0);
-		WR(7,0);
+		WR(7, 0);
 		bpck_disconnect(pi);
-
 		break;
 
 	}
 
 	dev_dbg(&pi->dev, "bpck: 0x%x unit %d mode %d: ",
 		pi->port, pi->unit, pi->mode);
-	print_hex_dump_debug("bpck: ", DUMP_PREFIX_NONE, TEST_LEN, 1, buf, TEST_LEN, false);
+	print_hex_dump_debug("bpck: ", DUMP_PREFIX_NONE, TEST_LEN, 1, buf,
+			     TEST_LEN, false);
 
 	e = 0;
-	for (i=0;i<TEST_LEN;i++) if (buf[i] != (i+1)) e++;
+	for (i = 0; i < TEST_LEN; i++) {
+		if (buf[i] != i + 1)
+			e++;
+	}
+
 	return e;
 }
 
 static void bpck_read_eeprom(struct pi_adapter *pi, char *buf)
-
-{       int i, j, k, p, v, f, om, od;
+{
+	int i, j, k, p, v, f, om, od;
 
 	bpck_force_spp(pi);
 

@@ -344,76 +390,96 @@ static void bpck_read_eeprom(struct pi_adapter *pi, char *buf)
 
 	bpck_connect(pi);
 	
-	WR(4,0);
-	for (i=0;i<64;i++) {
-	    WR(6,8);  
-	    WR(6,0xc);
-	    p = 0x100;
-	    for (k=0;k<9;k++) {
-		f = (((i + 0x180) & p) != 0) * 2;
-		WR(6,f+0xc); 
-		WR(6,f+0xd); 
-		WR(6,f+0xc);
-		p = (p >> 1);
-	    }
-	    for (j=0;j<2;j++) {
-		v = 0;
-		for (k=0;k<8;k++) {
-		    WR(6,0xc); 
-		    WR(6,0xd); 
-		    WR(6,0xc); 
-		    f = RR(0);
-		    v = 2*v + (f == 0x84);
+	WR(4, 0);
+	for (i = 0; i < 64; i++) {
+		WR(6, 8);
+		WR(6, 0xc);
+		p = 0x100;
+		for (k = 0; k < 9; k++) {
+			f = (((i + 0x180) & p) != 0) * 2;
+			WR(6, f + 0xc);
+			WR(6, f + 0xd);
+			WR(6, f + 0xc);
+			p = (p >> 1);
+		}
+		for (j = 0; j < 2; j++) {
+			v = 0;
+			for (k = 0; k < 8; k++) {
+				WR(6, 0xc);
+				WR(6, 0xd);
+				WR(6, 0xc);
+				f = RR(0);
+				v = 2 * v + (f == 0x84);
+			}
+			buf[2 * i + 1 - j] = v;
 		}
-		buf[2*i+1-j] = v;
-	    }
 	}
-	WR(6,8);
-	WR(6,0);
-	WR(5,8);
+	WR(6, 8);
+	WR(6, 0);
+	WR(5, 8);
 
 	bpck_disconnect(pi);
 
         if (om >= 2) {
-                bpck_connect(pi);
-                WR(7,3);
-                WR(4,8);
-                bpck_disconnect(pi);
+		bpck_connect(pi);
+		WR(7, 3);
+		WR(4, 8);
+		bpck_disconnect(pi);
         }
 
 	pi->mode = om; pi->delay = od;
 }
 
-static int bpck_test_port(struct pi_adapter *pi)	/* check for 8-bit port */
-
-{	int	i, r, m;
+static int bpck_test_port(struct pi_adapter *pi)
+{
+	int i, r, m;
 
+	/* Check for 8-bit port */
 	w2(0x2c); i = r0(); w0(255-i); r = r0(); w0(i);
 	m = -1;
-	if (r == i) m = 2;
-	if (r == (255-i)) m = 0;
-
-	w2(0xc); i = r0(); w0(255-i); r = r0(); w0(i);
-	if (r != (255-i)) m = -1;
+	if (r == i)
+		m = 2;
+	if (r == (255-i))
+		m = 0;
+
+	w2(0xc);
+	i = r0();
+	w0(255-i);
+	r = r0();
+	w0(i);
+	if (r != (255-i))
+		m = -1;
 	
-	if (m == 0) { w2(6); w2(0xc); r = r0(); w0(0xaa); w0(r); w0(0xaa); }
-	if (m == 2) { w2(0x26); w2(0xc); }
+	if (m == 0) {
+		w2(6);
+		w2(0xc);
+		r = r0();
+		w0(0xaa);
+		w0(r);
+		w0(0xaa);
+	}
+	if (m == 2) {
+		w2(0x26);
+		w2(0xc);
+	}
+
+	if (m == -1)
+		return 0;
 
-	if (m == -1) return 0;
 	return 5;
 }
 
 static void bpck_log_adapter(struct pi_adapter *pi)
-
-{	char	*mode_string[5] = { "4-bit","8-bit","EPP-8",
-				    "EPP-16","EPP-32" };
+{
+	char *mode_str[5] = { "4-bit", "8-bit", "EPP-8", "EPP-16", "EPP-32" };
 	char scratch[128];
 
 	bpck_read_eeprom(pi,scratch);
 	print_hex_dump_bytes("bpck EEPROM: ", DUMP_PREFIX_NONE, scratch, 128);
-	dev_info(&pi->dev, "backpack %8.8s unit %d at 0x%x, mode %d (%s), delay %d\n",
+	dev_info(&pi->dev,
+		 "backpack %8.8s unit %d at 0x%x, mode %d (%s), delay %d\n",
 		 &scratch[110], pi->unit, pi->port, pi->mode,
-		 mode_string[pi->mode], pi->delay);
+		 mode_str[pi->mode], pi->delay);
 }
 
 static struct pi_protocol bpck = {

index 3ec0abf16fa6..a644aa7f18b0 100644
@@ -1,17 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /* 
-	frpw.c	(c) 1996-8  Grant R. Guenther <[email protected]>
-		            Under the terms of the GNU General Public License
-
-	frpw.c is a low-level protocol driver for the Freecom "Power"
-	parallel port IDE adapter.
-	
-	Some applications of this adapter may require a "printer" reset
-	prior to loading the driver.  This can be done by loading and
-	unloading the "lp" driver, or it can be done by this driver
-	if you define FRPW_HARD_RESET.  The latter is not recommended
-	as it may upset devices on other ports.
-
-*/
+ * (c) 1996-1998  Grant R. Guenther <[email protected]>
+ *
+ * frpw.c is a low-level protocol driver for the Freecom "Power" parallel port
+ * IDE adapter.
+ *
+ * Some applications of this adapter may require a "printer" reset prior to
+ * loading the driver.  This can be done by loading and unloading the "lp"
+ * driver, or it can be done by this driver if you define FRPW_HARD_RESET.
+ * The latter is not recommended as it may upset devices on other ports.
+ */
 
 #include <linux/module.h>
 #include <linux/init.h>

@@ -25,15 +23,15 @@
 #define cec4		w2(0xc);w2(0xe);w2(0xe);w2(0xc);w2(4);w2(4);w2(4);
 #define j44(l,h)	(((l>>4)&0x0f)|(h&0xf0))
 
-/* cont = 0 - access the IDE register file 
-   cont = 1 - access the IDE command set 
-*/
-
+/*
+ * cont = 0 - access the IDE register file
+ * cont = 1 - access the IDE command set
+ */
 static int  cont_map[2] = { 0x08, 0x10 };
 
 static int frpw_read_regr(struct pi_adapter *pi, int cont, int regr)
-
-{	int	h,l,r;
+{
+	int h, l, r;
 
 	r = regr + cont_map[cont];
 

@@ -43,143 +41,154 @@ static int frpw_read_regr(struct pi_adapter *pi, int cont, int regr)
 	w2(4); h = r1();
 	w2(4); 
 
-	return j44(l,h);
-
+	return j44(l, h);
 }
 
 static void frpw_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
-
-{	int r;
-
-        r = regr + cont_map[cont];
+{
+	int r = regr + cont_map[cont];
 
 	w2(4); w0(r); cec4; 
 	w0(val);
-	w2(5);w2(7);w2(5);w2(4);
+	w2(5); w2(7); w2(5); w2(4);
 }
 
-static void frpw_read_block_int(struct pi_adapter *pi, char *buf, int count, int regr)
-
-{       int     h, l, k, ph;
-
-        switch(pi->mode) {
-
-        case 0: w2(4); w0(regr); cec4;
-                for (k=0;k<count;k++) {
-                        w2(6); l = r1();
-                        w2(4); h = r1();
-                        buf[k] = j44(l,h);
-                }
-                w2(4);
-                break;
-
-        case 1: ph = 2;
-                w2(4); w0(regr + 0xc0); cec4;
-                w0(0xff);
-                for (k=0;k<count;k++) {
-                        w2(0xa4 + ph); 
-                        buf[k] = r0();
-                        ph = 2 - ph;
-                } 
-                w2(0xac); w2(0xa4); w2(4);
-                break;
-
-        case 2: w2(4); w0(regr + 0x80); cec4;
-                for (k=0;k<count;k++) buf[k] = r4();
-                w2(0xac); w2(0xa4);
-                w2(4);
-                break;
-
-	case 3: w2(4); w0(regr + 0x80); cec4;
-		for (k=0;k<count-2;k++) buf[k] = r4();
+static void frpw_read_block_int(struct pi_adapter *pi, char *buf, int count,
+				int regr)
+{
+	int h, l, k, ph;
+
+	switch (pi->mode) {
+	case 0:
+		w2(4); w0(regr); cec4;
+		for (k = 0; k < count; k++) {
+			w2(6); l = r1();
+			w2(4); h = r1();
+			buf[k] = j44(l, h);
+		}
+		w2(4);
+		break;
+
+	case 1:
+		ph = 2;
+		w2(4); w0(regr + 0xc0); cec4;
+		w0(0xff);
+		for (k = 0; k < count; k++) {
+			w2(0xa4 + ph);
+			buf[k] = r0();
+			ph = 2 - ph;
+		}
+		w2(0xac); w2(0xa4); w2(4);
+		break;
+
+	case 2:
+		w2(4); w0(regr + 0x80); cec4;
+		for (k = 0; k < count; k++)
+			buf[k] = r4();
 		w2(0xac); w2(0xa4);
-		buf[count-2] = r4();
-		buf[count-1] = r4();
 		w2(4);
 		break;
 
-	case 4: w2(4); w0(regr + 0x80); cec4;
-                for (k=0;k<(count/2)-1;k++) ((u16 *)buf)[k] = r4w();
-                w2(0xac); w2(0xa4);
-                buf[count-2] = r4();
-                buf[count-1] = r4();
-                w2(4);
-                break;
-
-	case 5: w2(4); w0(regr + 0x80); cec4;
-                for (k=0;k<(count/4)-1;k++) ((u32 *)buf)[k] = r4l();
-                buf[count-4] = r4();
-                buf[count-3] = r4();
-                w2(0xac); w2(0xa4);
-                buf[count-2] = r4();
-                buf[count-1] = r4();
-                w2(4);
-                break;
+	case 3:
+		w2(4); w0(regr + 0x80); cec4;
+		for (k = 0; k < count - 2; k++)
+			buf[k] = r4();
+		w2(0xac); w2(0xa4);
+		buf[count - 2] = r4();
+		buf[count - 1] = r4();
+		w2(4);
+		break;
+
+	case 4:
+		w2(4); w0(regr + 0x80); cec4;
+		for (k = 0; k < count / 2 - 1; k++)
+			((u16 *)buf)[k] = r4w();
+		w2(0xac); w2(0xa4);
+		buf[count - 2] = r4();
+		buf[count - 1] = r4();
+		w2(4);
+		break;
 
+	case 5:
+		w2(4); w0(regr + 0x80); cec4;
+		for (k = 0; k < count / 4 - 1; k++)
+			((u32 *)buf)[k] = r4l();
+		buf[count - 4] = r4();
+		buf[count - 3] = r4();
+		w2(0xac); w2(0xa4);
+		buf[count - 2] = r4();
+		buf[count - 1] = r4();
+		w2(4);
+		break;
         }
 }
 
 static void frpw_read_block(struct pi_adapter *pi, char *buf, int count)
-
-{	frpw_read_block_int(pi,buf,count,0x08);
+{
+	frpw_read_block_int(pi, buf, count, 0x08);
 }
 
 static void frpw_write_block(struct pi_adapter *pi, char *buf, int count)
- 
-{	int	k;
-
-	switch(pi->mode) {
+{
+	int k;
 
+	switch (pi->mode) {
 	case 0:
 	case 1:
-	case 2: w2(4); w0(8); cec4; w2(5);
-        	for (k=0;k<count;k++) {
+	case 2:
+		w2(4); w0(8); cec4; w2(5);
+		for (k = 0; k < count; k++) {
 			w0(buf[k]);
-			w2(7);w2(5);
+			w2(7); w2(5);
 		}
 		w2(4);
 		break;
 
-	case 3: w2(4); w0(0xc8); cec4; w2(5);
-		for (k=0;k<count;k++) w4(buf[k]);
+	case 3:
+		w2(4); w0(0xc8); cec4; w2(5);
+		for (k = 0; k < count; k++)
+			w4(buf[k]);
 		w2(4);
 		break;
 
-        case 4: w2(4); w0(0xc8); cec4; w2(5);
-                for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
-                w2(4);
-                break;
+	case 4:
+		w2(4); w0(0xc8); cec4; w2(5);
+		for (k = 0; k < count / 2; k++)
+			w4w(((u16 *)buf)[k]);
+		w2(4);
+		break;
 
-        case 5: w2(4); w0(0xc8); cec4; w2(5);
-                for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
-                w2(4);
-                break;
+	case 5:
+		w2(4); w0(0xc8); cec4; w2(5);
+		for (k = 0; k < count / 4; k++)
+			w4l(((u32 *)buf)[k]);
+		w2(4);
+		break;
 	}
 }
 
 static void frpw_connect(struct pi_adapter *pi)
-
-{       pi->saved_r0 = r0();
-        pi->saved_r2 = r2();
+{
+	pi->saved_r0 = r0();
+	pi->saved_r2 = r2();
 	w2(4);
 }
 
 static void frpw_disconnect(struct pi_adapter *pi)
-
-{       w2(4); w0(0x20); cec4;
+{
+	w2(4); w0(0x20); cec4;
 	w0(pi->saved_r0);
-        w2(pi->saved_r2);
+	w2(pi->saved_r2);
 } 
 
-/* Stub logic to see if PNP string is available - used to distinguish
-   between the Xilinx and ASIC implementations of the Freecom adapter.
-*/
-
+/*
+ * Stub logic to see if PNP string is available - used to distinguish
+ * between the Xilinx and ASIC implementations of the Freecom adapter.
+ * returns chip_type:   0 = Xilinx, 1 = ASIC
+ */
 static int frpw_test_pnp(struct pi_adapter *pi)
-
-/*  returns chip_type:   0 = Xilinx, 1 = ASIC   */
-
-{	int olddelay, a, b;
+{
+	int olddelay, a, b;
 
 #ifdef FRPW_HARD_RESET
         w0(0); w2(8); udelay(50); w2(0xc);   /* parallel bus reset */

@@ -200,65 +209,70 @@ static int frpw_test_pnp(struct pi_adapter *pi)
         w0(pi->saved_r0);
         w2(pi->saved_r2);
 
-	return ((~a&0x40) && (b&0x40));
+	return ((~a & 0x40) && (b & 0x40));
 } 
 
-/* We use the pi->private to remember the result of the PNP test.
-   To make this work, private = port*2 + chip.  Yes, I know it's
-   a hack :-(
-*/
-
+/*
+ * We use the pi->private to remember the result of the PNP test.
+ * To make this work, private = port*2 + chip.  Yes, I know it's a hack :-(
+ */
 static int frpw_test_proto(struct pi_adapter *pi)
-
-{       int     j, k, r;
-	int	e[2] = {0,0};
+{
+	int j, k, r;
+	int e[2] = { 0, 0 };
 	char scratch[512];
 
-	if ((pi->private>>1) != pi->port)
-	   pi->private = frpw_test_pnp(pi) + 2*pi->port;
+	if ((pi->private >> 1) != pi->port)
+		pi->private = frpw_test_pnp(pi) + 2*pi->port;
 
-	if (((pi->private%2) == 0) && (pi->mode > 2)) {
-		dev_dbg(&pi->dev, "frpw: Xilinx does not support mode %d\n", pi->mode);
-	   return 1;
+	if (((pi->private & 0x1) == 0) && (pi->mode > 2)) {
+		dev_dbg(&pi->dev,
+			"frpw: Xilinx does not support mode %d\n", pi->mode);
+		return 1;
 	}
 
-	if (((pi->private%2) == 1) && (pi->mode == 2)) {
+	if (((pi->private & 0x1) == 1) && (pi->mode == 2)) {
 		dev_dbg(&pi->dev, "frpw: ASIC does not support mode 2\n");
-	   return 1;
+		return 1;
 	}
 
 	frpw_connect(pi);
-	for (j=0;j<2;j++) {
-                frpw_write_regr(pi,0,6,0xa0+j*0x10);
-                for (k=0;k<256;k++) {
-                        frpw_write_regr(pi,0,2,k^0xaa);
-                        frpw_write_regr(pi,0,3,k^0x55);
-                        if (frpw_read_regr(pi,0,2) != (k^0xaa)) e[j]++;
-                        }
-                }
+	for (j = 0; j < 2; j++) {
+		frpw_write_regr(pi, 0, 6, 0xa0 + j * 0x10);
+		for (k = 0; k < 256; k++) {
+			frpw_write_regr(pi, 0, 2, k ^ 0xaa);
+			frpw_write_regr(pi, 0, 3, k ^ 0x55);
+			if (frpw_read_regr(pi, 0, 2) != (k ^ 0xaa))
+				e[j]++;
+		}
+	}
 	frpw_disconnect(pi);
 
 	frpw_connect(pi);
-        frpw_read_block_int(pi,scratch,512,0x10);
-        r = 0;
-        for (k=0;k<128;k++) if (scratch[k] != k) r++;
+	frpw_read_block_int(pi, scratch, 512, 0x10);
+	r = 0;
+	for (k = 0; k < 128; k++) {
+		if (scratch[k] != k)
+			r++;
+	}
 	frpw_disconnect(pi);
 
-	dev_dbg(&pi->dev, "frpw: port 0x%x, chip %ld, mode %d, test=(%d,%d,%d)\n",
-	       pi->port, (pi->private%2), pi->mode, e[0], e[1], r);
+	dev_dbg(&pi->dev,
+		"frpw: port 0x%x, chip %ld, mode %d, test=(%d,%d,%d)\n",
+		pi->port, (pi->private%2), pi->mode, e[0], e[1], r);
 
-        return (r || (e[0] && e[1]));
+	return r || (e[0] && e[1]);
 }
 
-
 static void frpw_log_adapter(struct pi_adapter *pi)
 
-{       char    *mode_string[6] = {"4-bit","8-bit","EPP",
-				   "EPP-8","EPP-16","EPP-32"};
+{
+	char *mode[6] = { "4-bit", "8-bit", "EPP", "EPP-8", "EPP-16", "EPP-32"};
 
-	dev_info(&pi->dev, "Freecom (%s) adapter at 0x%x, mode %d (%s), delay %d\n",
-		((pi->private % 2) == 0) ? "Xilinx" : "ASIC",
-		pi->port, pi->mode, mode_string[pi->mode], pi->delay);
+	dev_info(&pi->dev,
+		 "Freecom (%s) adapter at 0x%x, mode %d (%s), delay %d\n",
+		 ((pi->private & 0x1) == 0) ? "Xilinx" : "ASIC",
+		 pi->port, pi->mode, mode[pi->mode], pi->delay);
 }
 
 static struct pi_protocol frpw = {