arm64: dts: Unify pinctrl-single pin group nodes for altera
Subsystems (2)
PATCH 1/1 arm64: dts: Unify pinctrl-single pin group nodes for altera
We want to unify the pinctrl-single pin group nodes to use naming "pins". Otherwise non-standad pin group names will add make dtbs checks errors when the pinctrl-single yaml binding gets merged.
Cc Conor Dooley <[email protected]>
Cc Krzysztof Kozlowski <[email protected]>
Cc Rob Herring <[email protected]>
Signed-off-by Tony Lindgren <[email protected]>
--- arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +2 -2
@@ -66,14 +66,14 @@ sdmmca-ecc@ff8c8c00 { }; &pinctrl0 { - i2c1_pmx_func: i2c1-pmx-func { + i2c1_pmx_func: i2c1-pins { pinctrl-single,pins = < 0x78 0x4 /* I2C1_SDA (IO6-B) PIN30SEL) */ 0x7c 0x4 /* I2C1_SCL (IO7-B) PIN31SEL */ >; }; - i2c1_pmx_func_gpio: i2c1-pmx-func-gpio { + i2c1_pmx_func_gpio: i2c1-gpio-pins { pinctrl-single,pins = < 0x78 0x8 /* I2C1_SDA (IO6-B) PIN30SEL) */ 0x7c 0x8 /* I2C1_SCL (IO7-B) PIN31SEL */
Signature · 1 line
2.40.1
Quoted 22 lines · Tony Lindgren
We want to unify the pinctrl-single pin group nodes to use naming "pins". Otherwise non-standad pin group names will add make dtbs checks errors when the pinctrl-single yaml binding gets merged.
Cc Conor Dooley <[email protected]>Cc Krzysztof Kozlowski <[email protected]>Cc Rob Herring <[email protected]>Signed-off-by Tony Lindgren <[email protected]>--- arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +1
-1@@ -66,14 +66,14 @@ sdmmca-ecc@ff8c8c00 { }; &pinctrl0 { - i2c1_pmx_func: i2c1-pmx-func { + i2c1_pmx_func: i2c1-pins { pinctrl-single,pins = <
arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts sdmmca-ecc@ff8c8c00 { · line 79
Quoted 10 lines
arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +1
-10x78 0x4 /* I2C1_SDA (IO6-B) PIN30SEL) */ 0x7c 0x4 /* I2C1_SCL (IO7-B) PIN31SEL */ >; }; - i2c1_pmx_func_gpio: i2c1-pmx-func-gpio { + i2c1_pmx_func_gpio: i2c1-gpio-pins { pinctrl-single,pins = < 0x78 0x8 /* I2C1_SDA (IO6-B) PIN30SEL) */ 0x7c 0x8 /* I2C1_SCL (IO7-B) PIN31SEL */
Applied!
Thanks,
Dinh