FAILED: patch "[PATCH] net: phy: mscc: enable VSC8501/2 RGMII RX clock" failed to apply to 5.10-stable tree

The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x 71460c9ec5c743e9ffffca3c874d66267c36345e
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2023052856-propeller-drainpipe-465e@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..

Possible dependencies:

71460c9ec5c7 ("net: phy: mscc: enable VSC8501/2 RGMII RX clock")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 71460c9ec5c743e9ffffca3c874d66267c36345e Mon Sep 17 00:00:00 2001
From: David Epping <[email protected]>
Date: Tue, 23 May 2023 17:31:08 +0200
Subject: [PATCH] net: phy: mscc: enable VSC8501/2 RGMII RX clock

By default the VSC8501 and VSC8502 RGMII/GMII/MII RX_CLK output is disabled. To allow packet forwarding towards the MAC it needs to be enabled.

For other PHYs supported by this driver the clock output is enabled by default.

index 79cbb2418664..defe5cc6d4fc 100644
@@ -179,6 +179,7 @@ enum rgmii_clock_delay {
 #define VSC8502_RGMII_CNTL		  20
 #define VSC8502_RGMII_RX_DELAY_MASK	  0x0070
 #define VSC8502_RGMII_TX_DELAY_MASK	  0x0007
+#define VSC8502_RGMII_RX_CLK_DISABLE	  0x0800
 
 #define MSCC_PHY_WOL_LOWER_MAC_ADDR	  21
 #define MSCC_PHY_WOL_MID_MAC_ADDR	  22