rootfs-postcommands: replace the sysusers.d postcommand
cover rootfs-postcommands: replace the sysusers.d postcommand
This is a suggestion to replace the management of sysusers.d in the build.
sysusers.d is a set of configuration files to declare system users and groups supposed to be created at boot when they do not exist.
Until now, we have a rootfs post command that checks those configuration and creates missing users and groups. This command is defective when a home directory or a shell is specified. The actual parsing leads to incorrect commands such as:
useradd --shell /sbin/nologin --uid 0 --comment "Super User" /root --system root
Also, it appears there is more interest for a command that checks all required users are correctly created before the rootfs is done.
Therefore, the first patch here replaces the command systemd_create_users by a command systemd_sysusers_check that every users/groups declared in sysusers.d configuration files already exist in /etc/passwd and /etc/group and check at best if the properties match.
This reveals two misconfiguration:
WARNING: memfault-image-1.0-r0 do_rootfs: User root has been defined as (root, 0, 0, root, /home/root, /bin/sh) but sysusers.d expects it as (root, 0, -, Super User, /root, -)
WARNING: memfault-image-1.0-r0 do_rootfs: Group wheel has never been defined
1. As systemd supposes the rootfs should not be configurable, whereas it is possibl ein yocto through the variable ROOT_HOME,, a second patch suggests to replace the sysusers.d configuration file 'basic.conf' by ours.
2. The user wheel can be used for some superuser tasks such as consulting the systemd journal or manage printers in cups. It can also be used for su and sudo in replacement of the sudo group. It looks good to add this in the base-passwd files. It is not upstreamable as the debian point of view is that the wheel group is unset by default.
---
Louis Rannou (3):
rootfs-postcommands: change sysusers.d command
systemd: replace the sysusers.d basic configuration
base-passwd: add the wheel group
meta/classes-recipe/rootfs-postcommands.bbclass | 133 +++++++++++++++++---- .../base-passwd/0007-Add-wheel-group.patch | 20 ++++ meta/recipes-core/base-passwd/base-passwd_3.6.1.bb | 1 + meta/recipes-core/systemd/systemd/basic.conf.in | 40 +++++++ meta/recipes-core/systemd/systemd_253.3.bb | 5 + 5 files changed, 175 insertions(+), 24 deletions(-)
---
base-commit: 8078a62739f08e60de98e194b9cd987d8c5b2e7b
change-id: 20230613-sysusersd-614778830079
Best regards,
Signature · 1 line
Louis Rannou <[email protected]>
PATCH 1/3 rootfs-postcommands: change sysusers.d command
The configuration in sysusers.d used to be parsed to create users/groups at build time instead at runtime. This was leading to several conflicts with users/groups defined in base-passwd recipe and specific definitions in recipes inheriting the useradd class. Some of those conflicts raised unseen errors in the do_rootfs command's logs.
As an example, the root home directory is set by default to /home/root but systemd expects it as /root.
The new command systemd_sysusers_check checks each configuration for users/groups and compare their properties to what is actually defined in the /etc/passwd and /etc/group of the target rootfs.
--- meta/classes-recipe/rootfs-postcommands.bbclass | 133 +++++++++++++++++++----- 1 file changed, 109 insertions(+), 24 deletions(-)
meta/classes-recipe/rootfs-postcommands.bbclass +109 -24
@@ -43,7 +43,7 @@ ROOTFS_POSTUNINSTALL_COMMAND =+ "write_image_manifest ; " POSTINST_LOGFILE ?= "${localstatedir}/log/postinstall.log" # Set default target for systemd images SYSTEMD_DEFAULT_TARGET ?= '${@bb.utils.contains_any("IMAGE_FEATURES", [ "x11-base", "weston" ], "graphical.target", "multi-user.target", d)}' -ROOTFS_POSTPROCESS_COMMAND += '${@bb.utils.contains("DISTRO_FEATURES", "systemd", "set_systemd_default_target; systemd_create_users;", "", d)}' +ROOTFS_POSTPROCESS_COMMAND += '${@bb.utils.contains("DISTRO_FEATURES", "systemd", "set_systemd_default_target; systemd_sysusers_check;", "", d)}' ROOTFS_POSTPROCESS_COMMAND += 'empty_var_volatile;'
@@ -69,29 +69,114 @@ python () { d.appendVar('ROOTFS_POSTPROCESS_COMMAND', 'rootfs_reproducible;') } -systemd_create_users () { - for conffile in ${IMAGE_ROOTFS}/usr/lib/sysusers.d/*.conf; do - [ -e $conffile ] || continue - grep -v "^#" $conffile | sed -e '/^$/d' | while read type name id comment; do - if [ "$type" = "u" ]; then - useradd_params="--shell /sbin/nologin" - [ "$id" != "-" ] && useradd_params="$useradd_params --uid $id" - [ "$comment" != "-" ] && useradd_params="$useradd_params --comment $comment" - useradd_params="$useradd_params --system $name" - eval useradd --root ${IMAGE_ROOTFS} $useradd_params || true - elif [ "$type" = "g" ]; then - groupadd_params="" - [ "$id" != "-" ] && groupadd_params="$groupadd_params --gid $id" - groupadd_params="$groupadd_params --system $name" - eval groupadd --root ${IMAGE_ROOTFS} $groupadd_params || true - elif [ "$type" = "m" ]; then - group=$id - eval groupadd --root ${IMAGE_ROOTFS} --system $group || true - eval useradd --root ${IMAGE_ROOTFS} --shell /sbin/nologin --system $name --no-user-group || true - eval usermod --root ${IMAGE_ROOTFS} -a -G $group $name - fi - done - done +# Resolve the ID as described in the sysusers.d(5) manual: ID can be a numeric +# uid, a couple uid:gid or uid:groupname or it is '-' meaning leaving it +# automatic or it can be a path. In the latter, the uid/gid matches the +# user/group owner of that file. +def resolve_sysusers_id(d, sid): + # If the id is a path, the uid/gid matchs to the target's uid/gid in the + # rootfs. + if '/' in sid: + try: + osstat = os.stat(os.path.join(d.getVar('IMAGE_ROOTFS'), sid)) + except FileNotFoundError: + bb.error('sysusers.d: file %s is required but it does not exist in the rootfs', sid) + return ('-', '-') + return (osstat.st_uid, osstat.st_gid) + # Else it is a uid:gid or uid:groupname syntax + if ':' in sid: + return sid.split(':') + else: + return (sid, '-') + +# Check a user exists in the rootfs password file and return its properties +def check_user_exists(d, uname=None, uid=None): + with open(os.path.join(d.getVar('IMAGE_ROOTFS'), 'etc/passwd'), 'r') as pwfile: + for line in pwfile: + (name, _, u_id, gid, comment, homedir, ushell) = line.strip().split(':') + if uname == name or uid == u_id: + return (name, u_id, gid, comment or '-', homedir or '/', ushell or '-') + return None + +# Check a group exists in the rootfs group file and return its properties +def check_group_exists(d, gname=None, gid=None): + with open(os.path.join(d.getVar('IMAGE_ROOTFS'), 'etc/group'), 'r') as gfile: + for line in gfile: + (name, _, g_id, _) = line.strip().split(':') + if name == gname or g_id == gid: + return (name, g_id) + return None + +def compare_users(user, e_user): + # user and e_user must not have None values. Unset values must be '-'. + (name, uid, gid, comment, homedir, ushell) = user + (e_name, e_uid, e_gid, e_comment, e_homedir, e_ushell) = e_user + # Ignore 'uid', 'gid' or 'comment' if they are not set + # Ignore 'shell' and 'ushell' if one is not set + return name == e_name \ + and (uid == '-' or uid == e_uid) \ + and (gid == '-' or gid == e_gid) \ + and (comment == '-' or e_comment == '-' or comment.lower() == e_comment.lower()) \ + and (homedir == '-' or e_homedir == '-' or homedir == e_homedir) \ + and (ushell == '-' or e_ushell == '-' or ushell == e_ushell) + +# Open sysusers.d configuration files and parse each line to check the users and +# groups are already defined in /etc/passwd and /etc/groups with similar +# properties. Refer to the sysusers.d(5) manual for its syntax. +python systemd_sysusers_check() { + import glob + import re + + pattern_comment = r'(-|\"[^:\"]+\")' + pattern_word = r'[^\s]+' + pattern_line = r'(' + pattern_word + r')\s+(' + pattern_word + r')\s+(' + pattern_word + r')(\s+' \ + + pattern_comment + r')?' + r'(\s+(' + pattern_word + r'))?' + r'(\s+(' + pattern_word + r'))?' + + for conffile in glob.glob(os.path.join(d.getVar('IMAGE_ROOTFS'), 'usr/lib/sysusers.d/*.conf')): + with open(conffile, 'r') as f: + for line in f: + line = line.strip() + if not len(line) or line[0] == '#': continue + ret = re.fullmatch(pattern_line, line.strip()) + if not ret: continue + (stype, sname, sid, _, scomment, _, shomedir, _, sshell) = ret.groups() + if stype == 'u': + if sid: + (suid, sgid) = resolve_sysusers_id(d, sid) + if sgid.isalpha(): + sgid = check_group_exists(d, gname=sgid) + elif sgid.isdigit(): + check_group_exists(d, gid=sgid) + else: + sgid = '-' + else: + suid = '-' + sgid = '-' + scomment = scomment.replace('"', '') if scomment else '-' + shomedir = shomedir or '-' + sshell = sshell or '-' + e_user = check_user_exists(d, uname=sname) + if not e_user: + bb.warn('User %s has never been defined' % sname) + elif not compare_users((sname, suid, sgid, scomment, shomedir, sshell), e_user): + bb.warn('User %s has been defined as (%s) but sysusers.d expects it as (%s)' + % (sname, ', '.join(e_user), + ', '.join((sname, suid, sgid, scomment, shomedir, sshell)))) + elif stype == 'g': + gid = sid or '-' + if '/' in gid: + (_, gid) = resolve_sysusers_id(d, sid) + e_group = check_group_exists(d, gname=sname) + if not e_group: + bb.warn('Group %s has never been defined' % sname) + elif gid != '-': + (_, e_gid) = e_group + if gid != e_gid: + bb.warn('Group %s has been defined with id (%s) but sysusers.d expects gid (%s)' + % (sname, e_gid, gid)) + elif stype == 'm': + check_user_exists(d, sname) + check_group_exists(d, sid) } #
Signature · 1 line
2.41.0
PATCH 2/3 systemd: replace the sysusers.d basic configuration
In reply to Louis RannouThe default sysusers basic.conf.in file sets the root home directory to /root and does not permit its configuration. Replace the file delivered by systemd so the root home directory matches the ROOT_HOME variable.
--- meta/recipes-core/systemd/systemd/basic.conf.in | 40 +++++++++++++++++++++++++ meta/recipes-core/systemd/systemd_253.3.bb | 5 ++++ 2 files changed, 45 insertions(+)
meta/recipes-core/systemd/systemd/basic.conf.in new file +40 -0
@@ -0,0 +1,40 @@ +# This file is part of systemd. +# +# systemd is free software; you can redistribute it and/or modify it +# under the terms of the GNU Lesser General Public License as published by +# the Free Software Foundation; either version 2.1 of the License, or +# (at your option) any later version. + +# The superuser +u root 0 "root" :ROOT_HOME: + +# The nobody user/group for NFS file systems +g {{NOBODY_GROUP_NAME}} 65534 - - +u {{NOBODY_USER_NAME }} 65534:65534 "Nobody" - + +# Administrator group: can *see* more than normal users +g adm {{ADM_GID }} - - + +# Administrator group: can *do* more than normal users +g wheel {{WHEEL_GID }} - - + +# Access to shared database of users on the system +g utmp {{UTMP_GID }} - - + +# Physical and virtual hardware access groups +g audio {{AUDIO_GID }} - - +g cdrom {{CDROM_GID }} - - +g dialout {{DIALOUT_GID}} - - +g disk {{DISK_GID }} - - +g input {{INPUT_GID }} - - +g kmem {{KMEM_GID }} - - +g kvm {{KVM_GID }} - - +g lp {{LP_GID }} - - +g render {{RENDER_GID }} - - +g sgx {{SGX_GID }} - - +g tape {{TAPE_GID }} - - +g tty {{TTY_GID }} - - +g video {{VIDEO_GID }} - - + +# Default group for normal users +g users {{USERS_GID }} - -
meta/recipes-core/systemd/systemd_253.3.bb +5 -0
@@ -17,6 +17,7 @@ REQUIRED_DISTRO_FEATURES = "systemd" SRC_URI += " \ file://touchscreen.rules \ file://00-create-volatile.conf \ + file://basic.conf.in \ ${@bb.utils.contains('PACKAGECONFIG', 'polkit_hostnamed_fallback', 'file://org.freedesktop.hostname1_no_polkit.conf', '', d)} \ ${@bb.utils.contains('PACKAGECONFIG', 'polkit_hostnamed_fallback', 'file://00-hostnamed-network-user.conf', '', d)} \ file://init \
@@ -252,6 +253,10 @@ EXTRA_OEMESON += "-Dkexec-path=${sbindir}/kexec \ # The 60 seconds is watchdog's default vaule. WATCHDOG_TIMEOUT ??= "60" +do_configure:prepend() { + sed s@:ROOT_HOME:@${ROOT_HOME}@g ${WORKDIR}/basic.conf.in > ${S}/sysusers.d/basic.conf.in +} + do_install() { meson_do_install install -d ${D}/${base_sbindir}
Signature · 1 line
2.41.0
RE: [OE-core] [PATCH 2/3] systemd: replace the sysusers.d basic configuration
Quoted 68 lines
-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Louis Rannou
Sent: den 15 juni 2023 13:44
To: [email protected]
Cc: Louis Rannou <[email protected]>; [email protected]
Subject: [OE-core] [PATCH 2/3] systemd: replace the sysusers.d basic configurationThe default sysusers basic.conf.in file sets the root home directory to
/rootand does not permit its configuration. Replace the file delivered by systemd so the root home directory matches theROOT_HOMEvariable.Signed-off-by Louis Rannou <[email protected]>--- meta/recipes-core/systemd/systemd/basic.conf.in | 40 +++++++++++++++++++++++++ meta/recipes-core/systemd/systemd_253.3.bb | 5 ++++ 2 files changed, 45 insertions(+)meta/recipes-core/systemd/systemd/basic.conf.in new file +40
-0@@ -0,0 +1,40 @@ +# This file is part of systemd. +# +# systemd is free software; you can redistribute it and/or modify it +# under the terms of the GNU Lesser General Public License as published by +# the Free Software Foundation; either version 2.1 of the License, or +# (at your option) any later version. + +# The superuser +u root 0 "root" :ROOT_HOME: + +# The nobody user/group for NFS file systems +g {{NOBODY_GROUP_NAME}} 65534 - - +u {{NOBODY_USER_NAME }} 65534:65534 "Nobody" - + +# Administrator group: can *see* more than normal users +g adm {{ADM_GID }} - - + +# Administrator group: can *do* more than normal users +g wheel {{WHEEL_GID }} - - + +# Access to shared database of users on the system +g utmp {{UTMP_GID }} - - + +# Physical and virtual hardware access groups +g audio {{AUDIO_GID }} - - +g cdrom {{CDROM_GID }} - - +g dialout {{DIALOUT_GID}} - - +g disk {{DISK_GID }} - - +g input {{INPUT_GID }} - - +g kmem {{KMEM_GID }} - - +g kvm {{KVM_GID }} - - +g lp {{LP_GID }} - - +g render {{RENDER_GID }} - - +g sgx {{SGX_GID }} - - +g tape {{TAPE_GID }} - - +g tty {{TTY_GID }} - - +g video {{VIDEO_GID }} - - + +# Default group for normal users +g users {{USERS_GID }} - -meta/recipes-core/systemd/systemd_253.3.bb +0
-0
meta/recipes-core/systemd/systemd_253.3.bb REQUIRED_DISTRO_FEATURES = "systemd" · line 20
Quoted 4 lines
meta/recipes-core/systemd/systemd_253.3.bb +1
-0@@ -17,6 +17,7 @@ REQUIRED_DISTRO_FEATURES = "systemd" SRC_URI += " \ file://touchscreen.rules \ file://00-create-volatile.conf \ + file://basic.conf.in \
Instead of including a modified copy of the basic.conf.in file from systemd, include a patch that modifies the file that systemd provides. Otherwise this becomes a maintenance problem where it is easy to miss changes that upstream does to the file, and also hard to know what you have changed.
meta/recipes-core/systemd/systemd_253.3.bb EXTRA_OEMESON += "-Dkexec-path=${sbindir}/kexec \ · line 257
Quoted 9 lines
meta/recipes-core/systemd/systemd_253.3.bb +2
-0${@bb.utils.contains('PACKAGECONFIG', 'polkit_hostnamed_fallback', 'file://org.freedesktop.hostname1_no_polkit.conf', '', d)} \ ${@bb.utils.contains('PACKAGECONFIG', 'polkit_hostnamed_fallback', 'file://00-hostnamed-network-user.conf', '', d)} \ file://init \@@ -252,6 +253,10 @@ EXTRA_OEMESON += "-Dkexec-path=${sbindir}/kexec \ # The 60 seconds is watchdog's default vaule. WATCHDOG_TIMEOUT ??= "60" +do_configure:prepend() { + sed s@:ROOT_HOME:@${ROOT_HOME}@g ${WORKDIR}/basic.conf.in > ${S}/sysusers.d/basic.conf.in
Please indent shell code using tabs, and change the command to:
sed -i s@:ROOT_HOME:@${ROOT_HOME}@g ${S}/sysusers.d/basic.conf.inonce you have added the patch as per above.
However, I am wondering if this has to be done during do_configure()? It might become confusing if you ever devtool modify systemd (which we do). Wouldn't it be better to do it on the installed file in the do_install() below instead?
Quoted 8 lines
meta/recipes-core/systemd/systemd_253.3.bb +2
-1+} + do_install() { meson_do_install install -d ${D}/${base_sbindir} --2.41.0
//Peter
Re: [OE-core] [PATCH 2/3] systemd: replace the sysusers.d basic configuration
Hello,
Quoted 70 lines · Peter Kjellerstedt
Quoted 70 lines
-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Louis Rannou
Sent: den 15 juni 2023 13:44
To: [email protected]
Cc: Louis Rannou <[email protected]>; [email protected]
Subject: [OE-core] [PATCH 2/3] systemd: replace the sysusers.d basic configurationThe default sysusers basic.conf.in file sets the root home directory to
/rootand does not permit its configuration. Replace the file delivered by systemd so the root home directory matches theROOT_HOMEvariable.Signed-off-by Louis Rannou <[email protected]>--- meta/recipes-core/systemd/systemd/basic.conf.in | 40 +++++++++++++++++++++++++ meta/recipes-core/systemd/systemd_253.3.bb | 5 ++++ 2 files changed, 45 insertions(+)meta/recipes-core/systemd/systemd/basic.conf.in new file +40
-0@@ -0,0 +1,40 @@ +# This file is part of systemd. +# +# systemd is free software; you can redistribute it and/or modify it +# under the terms of the GNU Lesser General Public License as published by +# the Free Software Foundation; either version 2.1 of the License, or +# (at your option) any later version. + +# The superuser +u root 0 "root" :ROOT_HOME: + +# The nobody user/group for NFS file systems +g {{NOBODY_GROUP_NAME}} 65534 - - +u {{NOBODY_USER_NAME }} 65534:65534 "Nobody" - + +# Administrator group: can *see* more than normal users +g adm {{ADM_GID }} - - + +# Administrator group: can *do* more than normal users +g wheel {{WHEEL_GID }} - - + +# Access to shared database of users on the system +g utmp {{UTMP_GID }} - - + +# Physical and virtual hardware access groups +g audio {{AUDIO_GID }} - - +g cdrom {{CDROM_GID }} - - +g dialout {{DIALOUT_GID}} - - +g disk {{DISK_GID }} - - +g input {{INPUT_GID }} - - +g kmem {{KMEM_GID }} - - +g kvm {{KVM_GID }} - - +g lp {{LP_GID }} - - +g render {{RENDER_GID }} - - +g sgx {{SGX_GID }} - - +g tape {{TAPE_GID }} - - +g tty {{TTY_GID }} - - +g video {{VIDEO_GID }} - - + +# Default group for normal users +g users {{USERS_GID }} - -meta/recipes-core/systemd/systemd_253.3.bb +0
-0@@ -17,6 +17,7 @@ REQUIRED_DISTRO_FEATURES = "systemd" SRC_URI += " \ file://touchscreen.rules \
Quoted 9 lines
meta/recipes-core/systemd/systemd_253.3.bb REQUIRED_DISTRO_FEATURES = "systemd" · line 20
Quoted 2 lines
meta/recipes-core/systemd/systemd_253.3.bb +1
-0file://00-create-volatile.conf \ + file://basic.conf.in \Instead of including a modified copy of the basic.conf.in file from systemd, include a patch that modifies the file that systemd provides. Otherwise this becomes a maintenance problem where it is easy to miss changes that upstream does to the file, and also hard to know what you have changed.
This came to my mind, but it seems to me it's a configuration and not a patch. Some distribution as debian generate their own. It could also be replaced by the user to set its own preferences. It is not supposed to change the default configuration, but to set the one we need.
Quoted 7 lines
Quoted 7 lines
meta/recipes-core/systemd/systemd_253.3.bb +0
-0${@bb.utils.contains('PACKAGECONFIG', 'polkit_hostnamed_fallback', 'file://org.freedesktop.hostname1_no_polkit.conf', '', d)} \ ${@bb.utils.contains('PACKAGECONFIG', 'polkit_hostnamed_fallback', 'file://00-hostnamed-network-user.conf', '', d)} \ file://init \@@ -252,6 +253,10 @@ EXTRA_OEMESON += "-Dkexec-path=${sbindir}/kexec \ # The 60 seconds is watchdog's default vaule. WATCHDOG_TIMEOUT ??= "60"
Quoted 8 lines
meta/recipes-core/systemd/systemd_253.3.bb EXTRA_OEMESON += "-Dkexec-path=${sbindir}/kexec \ · line 257
Quoted 2 lines
meta/recipes-core/systemd/systemd_253.3.bb +2
-0+do_configure:prepend() { + sed s@:ROOT_HOME:@${ROOT_HOME}@g ${WORKDIR}/basic.conf.in > ${S}/sysusers.d/basic.conf.inPlease indent shell code using tabs, and change the command to:
sed -i s@:ROOT_HOME:@${ROOT_HOME}@g ${S}/sysusers.d/basic.conf.inonce you have added the patch as per above.
I understand '@' is easier to read than ':'. I have used the colon because its usage is very restricted in the sysusers.d file. But it's fine to me as this is supposed to be a path. Also, the input file and the output are not in the same directory. I am not sure about the "-i" option.
Quoted 6 lines
However, I am wondering if this has to be done during
do_configure()? It might become confusing if you everdevtool modify systemd(which we do). Wouldn't it be better to do it on the installed file in thedo_install()below instead?
This file is parsed at systemd compilation. The file has to be correct before that.
Quoted 11 lines
Quoted 8 lines
meta/recipes-core/systemd/systemd_253.3.bb +2
-1+} + do_install() { meson_do_install install -d ${D}/${base_sbindir} --2.41.0
//Peter
Louis
A message that is not in the archive (sent off-list or not yet received): [email protected]
Re: [OE-core] [PATCH 2/3] systemd: replace the sysusers.d basic configuration
Hello, please find an answer to the last comment
Quoted 84 lines · Louis Rannou
Hello,
Quoted 72 lines · Peter Kjellerstedt
Quoted 72 lines
-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Louis Rannou
Sent: den 15 juni 2023 13:44
To: [email protected]
Cc: Louis Rannou <[email protected]>; [email protected]
Subject: [OE-core] [PATCH 2/3] systemd: replace the sysusers.d basic configurationThe default sysusers basic.conf.in file sets the root home directory to
/rootand does not permit its configuration. Replace the file delivered by systemd so the root home directory matches theROOT_HOMEvariable.Signed-off-by Louis Rannou <[email protected]>---
meta/recipes-core/systemd/systemd/basic.conf.in | 40
+++++++++++++++++++++++++
meta/recipes-core/systemd/systemd_253.3.bb | 5 ++++2 files changed, 45 insertions(+)meta/recipes-core/systemd/systemd/basic.conf.in new file +4
-0@@ -0,0 +1,40 @@ +# This file is part of systemd. +# +# systemd is free software; you can redistribute it and/or modify it +# under the terms of the GNU Lesser General Public License aspublished by
meta/recipes-core/systemd/systemd/basic.conf.in new file +36
-0+# the Free Software Foundation; either version 2.1 of the License, or +# (at your option) any later version. + +# The superuser +u root 0 "root" :ROOT_HOME: + +# The nobody user/group for NFS file systems +g {{NOBODY_GROUP_NAME}} 65534 - - +u {{NOBODY_USER_NAME }} 65534:65534 "Nobody" - + +# Administrator group: can *see* more than normal users +g adm {{ADM_GID }} - - + +# Administrator group: can *do* more than normal users +g wheel {{WHEEL_GID }} - - + +# Access to shared database of users on the system +g utmp {{UTMP_GID }} - - + +# Physical and virtual hardware access groups +g audio {{AUDIO_GID }} - - +g cdrom {{CDROM_GID }} - - +g dialout {{DIALOUT_GID}} - - +g disk {{DISK_GID }} - - +g input {{INPUT_GID }} - - +g kmem {{KMEM_GID }} - - +g kvm {{KVM_GID }} - - +g lp {{LP_GID }} - - +g render {{RENDER_GID }} - - +g sgx {{SGX_GID }} - - +g tape {{TAPE_GID }} - - +g tty {{TTY_GID }} - - +g video {{VIDEO_GID }} - - + +# Default group for normal users +g users {{USERS_GID }} - -meta/recipes-core/systemd/systemd_253.3.bb +0
-0@@ -17,6 +17,7 @@ REQUIRED_DISTRO_FEATURES = "systemd" SRC_URI += " \ file://touchscreen.rules \Quoted 9 lines
meta/recipes-core/systemd/systemd_253.3.bb REQUIRED_DISTRO_FEATURES = "systemd" · line 20
Quoted 2 lines
meta/recipes-core/systemd/systemd_253.3.bb +1
-0file://00-create-volatile.conf \ + file://basic.conf.in \Instead of including a modified copy of the basic.conf.in file from systemd, include a patch that modifies the file that systemd provides. Otherwise this becomes a maintenance problem where it is easy to miss changes that upstream does to the file, and also hard to know what you have changed.
Quoted 18 lines
This came to my mind, but it seems to me it's a configuration and not a patch. Some distribution as debian generate their own.
Quoted 16 lines
Quoted 10 lines
meta/recipes-core/systemd/systemd_253.3.bb +0
-0${@bb.utils.contains('PACKAGECONFIG', 'polkit_hostnamed_fallback', 'file://org.freedesktop.hostname1_no_polkit.conf', '', d)} \ ${@bb.utils.contains('PACKAGECONFIG', 'polkit_hostnamed_fallback', 'file://00-hostnamed-network-user.conf', '', d)} \ file://init \@@ -252,6 +253,10 @@ EXTRA_OEMESON += "-Dkexec-path=${sbindir}/kexec \ # The 60 seconds is watchdog's default vaule.
WATCHDOG_TIMEOUT??= "60"+do_configure:prepend() {
+ sed s@:ROOT_HOME:@${ROOT_HOME}@g ${WORKDIR}/basic.conf.in > ${S}/sysusers.d/basic.conf.inPlease indent shell code using tabs, and change the command to:
sed -i s@:ROOT_HOME:@${ROOT_HOME}@g ${S}/sysusers.d/basic.conf.in
once you have added the patch as per above.
That's incorrect as the source and destination are different. Perhaps I should call the initial file basic.conf.in.in if it's more clear.
Quoted 5 lines
Quoted 5 lines
However, I am wondering if this has to be done during
do_configure()? It might become confusing if you everdevtool modify systemd(which we do). Wouldn't it be better to do it on the installed file in thedo_install()below instead?
This file is used at compilation to produce the basic.conf file. So it's needed after the configuration. What would go wrong with devtool ?
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
meta/recipes-core/systemd/systemd_253.3.bb +2
-0+} +
do_install(){
meson_do_install
install -d ${D}/${base_sbindir}
Louis
RE: [OE-core] [PATCH 2/3] systemd: replace the sysusers.d basic configuration
Quoted 118 lines
-----Original Message-----
From: Louis Rannou <[email protected]>
Sent: den 29 juni 2023 15:04
To: Peter Kjellerstedt <[email protected]>; openembedded- [email protected]
Cc: [email protected]
Subject: Re: [OE-core] [PATCH 2/3] systemd: replace the sysusers.d basic configurationHello, please find an answer to the last comment
Quoted 25 lines · Louis Rannou
Hello,
Quoted 22 lines · Peter Kjellerstedt
Quoted 22 lines
-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Louis Rannou
Sent: den 15 juni 2023 13:44
To: [email protected]
Cc: Louis Rannou <[email protected]>; [email protected]
Subject: [OE-core] [PATCH 2/3] systemd: replace the sysusers.d basic configurationThe default sysusers basic.conf.in file sets the root home directory to
/root
and does not permit its configuration. Replace the file delivered by systemd so
the root home directory matches theROOT_HOMEvariable.Signed-off-by Louis Rannou <[email protected]>---
meta/recipes-core/systemd/systemd/basic.conf.in | 40
+++++++++++++++++++++++++
meta/recipes-core/systemd/systemd_253.3.bb | 5 ++++2 files changed, 45 insertions(+)Quoted 13 lines
Quoted 5 lines
Quoted 5 lines
meta/recipes-core/systemd/systemd/basic.conf.in new file +0
-1--- /dev/nullQuoted 8 lines
Quoted 8 lines
+++ b/meta/recipes-core/systemd/systemd/basic.conf.in
meta/recipes-core/systemd/systemd/basic.conf.in new file +4
-0@@ -0,0 +1,40 @@ +# This file is part of systemd. +# +# systemd is free software; you can redistribute it and/or modify it +# under the terms of the GNU Lesser General Public License aspublished by
+# the Free Software Foundation; either version 2.1 of the License,or
Quoted 67 lines
Quoted 43 lines
Quoted 43 lines
meta/recipes-core/systemd/systemd/basic.conf.in new file +35
-0+# (at your option) any later version. + +# The superuser +u root 0 "root" :ROOT_HOME: + +# The nobody user/group for NFS file systems +g {{NOBODY_GROUP_NAME}} 65534 - - +u {{NOBODY_USER_NAME }} 65534:65534 "Nobody" - + +# Administrator group: can *see* more than normal users +g adm {{ADM_GID }} - - + +# Administrator group: can *do* more than normal users +g wheel {{WHEEL_GID }} - - + +# Access to shared database of users on the system +g utmp {{UTMP_GID }} - - + +# Physical and virtual hardware access groups +g audio {{AUDIO_GID }} - - +g cdrom {{CDROM_GID }} - - +g dialout {{DIALOUT_GID}} - - +g disk {{DISK_GID }} - - +g input {{INPUT_GID }} - - +g kmem {{KMEM_GID }} - - +g kvm {{KVM_GID }} - - +g lp {{LP_GID }} - - +g render {{RENDER_GID }} - - +g sgx {{SGX_GID }} - - +g tape {{TAPE_GID }} - - +g tty {{TTY_GID }} - - +g video {{VIDEO_GID }} - - + +# Default group for normal users +g users {{USERS_GID }} - -meta/recipes-core/systemd/systemd_253.3.bb +0
-0@@ -17,6 +17,7 @@ REQUIRED_DISTRO_FEATURES = "systemd" SRC_URI += " \ file://touchscreen.rules \Quoted 9 lines
meta/recipes-core/systemd/systemd_253.3.bb REQUIRED_DISTRO_FEATURES = "systemd" · line 20
Quoted 2 lines
meta/recipes-core/systemd/systemd_253.3.bb +1
-0file://00-create-volatile.conf \ + file://basic.conf.in \Instead of including a modified copy of the basic.conf.in file from systemd, include a patch that modifies the file that systemd provides. Otherwise this becomes a maintenance problem where it is easy to miss changes that upstream does to the file, and also hard to know what you have changed.
This came to my mind, but it seems to me it's a configuration and not a patch. Some distribution as debian generate their own.
Quoted 12 lines
Quoted 9 lines
meta/recipes-core/systemd/systemd_253.3.bb +0
-0${@bb.utils.contains('PACKAGECONFIG', 'polkit_hostnamed_fallback', 'file://org.freedesktop.hostname1_no_polkit.conf', '', d)} \ ${@bb.utils.contains('PACKAGECONFIG', 'polkit_hostnamed_fallback', 'file://00-hostnamed-network-user.conf', '', d)} \ file://init \@@ -252,6 +253,10 @@ EXTRA_OEMESON += "-Dkexec-path=${sbindir}/kexec \ # The 60 seconds is watchdog's default vaule.
WATCHDOG_TIMEOUT??= "60"+do_configure:prepend() {
+ sed s@:ROOT_HOME:@${ROOT_HOME}@g ${WORKDIR}/basic.conf.in > ${S}/sysusers.d/basic.conf.inPlease indent shell code using tabs, and change the command to:
Quoted 6 lines
Quoted 3 lines
Quoted 3 lines
sed -i s@:ROOT_HOME:@${ROOT_HOME}@g ${S}/sysusers.d/basic.conf.in
once you have added the patch as per above.
That's incorrect as the source and destination are different. Perhaps I should call the initial file basic.conf.in.in if it's more clear.
Note the "once you have added the patch" part. I.e., once you have added a patch to modify the basic.conf.in that systemd provides, the above command should work. However, depending on whether systemd´s build system actually uses the path provided in the basic.conf.in file (which I doubt), a better way would be do run the sed above on the installed basic.conf file. I.e., use a patch to modify basic.conf.in to contain ":ROOT_HOME:" instead of what path systemd upstream provides, and then use sed in do_install:append to replace ":ROOT_HOME:" with "${ROOT_HOME}" in the installed basic.conf file.
Quoted 8 lines
Quoted 6 lines
Quoted 6 lines
However, I am wondering if this has to be done during
do_configure()? It might become confusing if you everdevtool modify systemd(which we do). Wouldn't it be better to do it on the installed file in thedo_install()below instead?This file is used at compilation to produce the basic.conf file. So it's needed after the configuration. What would go wrong with devtool ?
The change that sed makes would be seen as a change to the sources checked out by devtool, and thus you risk someone accidentally committing it when they make other changes to systemd using devtool modify.
Quoted 10 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
meta/recipes-core/systemd/systemd_253.3.bb +2
-0+} +
do_install(){
meson_do_install
install -d ${D}/${base_sbindir}Louis
//Peter
PATCH 3/3 base-passwd: add the wheel group
In reply to Louis RannouThe wheel group is not declared while it can be used to access the systemd journal and to configure printers in CUPS. It can also be used for su and sudo permissions.
So far it was created later in the rootfs postcommand systemd_create_users.
--- .../base-passwd/0007-Add-wheel-group.patch | 20 ++++++++++++++++++++ meta/recipes-core/base-passwd/base-passwd_3.6.1.bb | 1 + 2 files changed, 21 insertions(+)
meta/recipes-core/base-passwd/base-passwd/0007-Add-wheel-group.patch new file +20 -0
@@ -0,0 +1,20 @@ + +We need to have a wheel group which has some system privileges to consult the +systemd journal or manage printers with cups. + +Upstream status says the group does not exist by default. + +Upstream-Status: Inappropriate [enable feature] + +Signed-off-by: Louis Rannou <[email protected]> +Index: base-passwd-3.5.26/group.master +=================================================================== +--- base-passwd-3.5.29.orig/group.master ++++ base-passwd-3.5.29/group.master +@@ -38,5 +38,6 @@ + staff:*:50: + games:*:60: + shutdown:*:70: ++wheel:*:80: + users:*:100: + nogroup:*:65534:
meta/recipes-core/base-passwd/base-passwd_3.6.1.bb +1 -0
@@ -12,6 +12,7 @@ SRC_URI = "https://launchpad.net/debian/+archive/primary/+files/${BPN}_${PV}.tar file://0004-Add-an-input-group-for-the-dev-input-devices.patch \ file://0005-Add-kvm-group.patch \ file://0006-Make-it-possible-to-configure-whether-to-use-SELinux.patch \ + file://0007-Add-wheel-group.patch \ " SRC_URI[sha256sum] = "6ff369be59d586ba63c0c5fcb00f75f9953fe49db88bc6c6428f2c92866f79af"
Signature · 1 line
2.41.0
Re: [OE-core] [PATCH 3/3] base-passwd: add the wheel group
Quoted 18 lines · Louis Rannou
The wheel group is not declared while it can be used to access the systemd journal and to configure printers in CUPS. It can also be used for su and sudo permissions.
So far it was created later in the rootfs postcommand
systemd_create_users.Signed-off-by Louis Rannou <[email protected]>--- .../base-passwd/0007-Add-wheel-group.patch | 20 ++++++++++++++++++++ meta/recipes-core/base-passwd/base-passwd_3.6.1.bb | 1 + 2 files changed, 21 insertions(+)meta/recipes-core/base-passwd/base-passwd/0007-Add-wheel-group.patch new file +0
-0
meta/recipes-core/base-passwd/base-passwd/0007-Add-wheel-group.patch line 5
Quoted 5 lines
meta/recipes-core/base-passwd/base-passwd/0007-Add-wheel-group.patch new file +5
-0@@ -0,0 +1,20 @@ + +We need to have a wheel group which has some system privileges to consult the +systemd journal or manage printers with cups. + +Upstream status says the group does not exist by default.
This should be rephrased because it causes:
Malformed Upstream-Status 'Upstream status' (meta/recipes-core/base-passwd/base-passwd/0007-Add-wheel-group.patch) Unknown Upstream-Status value 'says' (meta/recipes-core/base-passwd/base-passwd/0007-Add-wheel-group.patch) Patches missing Upstream-Status: 0 (0%)
Patches with malformed Upstream-Status: 1 (0%)
Quoted 41 lines
meta/recipes-core/base-passwd/base-passwd/0007-Add-wheel-group.patch new file +15
-0+ +Upstream-Status: Inappropriate [enable feature] + +Signed-off-by: Louis Rannou <[email protected]> +Index: base-passwd-3.5.26/group.master +=================================================================== +--- base-passwd-3.5.29.orig/group.master ++++ base-passwd-3.5.29/group.master +@@ -38,5 +38,6 @@ + staff:*:50: + games:*:60: + shutdown:*:70: ++wheel:*:80: + users:*:100: + nogroup:*:65534:meta/recipes-core/base-passwd/base-passwd_3.6.1.bb +1
-0@@ -12,6 +12,7 @@ SRC_URI = "https://launchpad.net/debian/+archive/primary/+files/${BPN}_${PV}.tar file://0004-Add-an-input-group-for-the-dev-input-devices.patch \ file://0005-Add-kvm-group.patch \ file://0006-Make-it-possible-to-configure-whether-to-use-SELinux.patch \ + file://0007-Add-wheel-group.patch \ " SRC_URI[sha256sum] = "6ff369be59d586ba63c0c5fcb00f75f9953fe49db88bc6c6428f2c92866f79af"Signature · 12 lines
-- 2.41.0 -=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#182849): https://lists.openembedded.org/g/openembedded-core/message/182849 Mute This Topic: https://lists.openembedded.org/mt/99546759/3617179 Group Owner: [email protected] Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
Signature · 3 lines
Alexandre Belloni, co-owner and COO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
Re: [OE-core] [PATCH 3/3] base-passwd: add the wheel group
Quoted 27 lines · Alexandre Belloni
Quoted 18 lines · Louis Rannou
The wheel group is not declared while it can be used to access the systemd journal and to configure printers in CUPS. It can also be used for su and sudo permissions.
So far it was created later in the rootfs postcommand
systemd_create_users.Signed-off-by Louis Rannou <[email protected]>--- .../base-passwd/0007-Add-wheel-group.patch | 20 ++++++++++++++++++++ meta/recipes-core/base-passwd/base-passwd_3.6.1.bb | 1 + 2 files changed, 21 insertions(+)meta/recipes-core/base-passwd/base-passwd/0007-Add-wheel-group.patch new file +0
-0meta/recipes-core/base-passwd/base-passwd/0007-Add-wheel-group.patch line 5
Quoted 5 lines
meta/recipes-core/base-passwd/base-passwd/0007-Add-wheel-group.patch new file +5
-0@@ -0,0 +1,20 @@ + +We need to have a wheel group which has some system privileges to consult the +systemd journal or manage printers with cups. + +Upstream status says the group does not exist by default.This should be rephrased because it causes:
Quoted 4 lines
Malformed Upstream-Status 'Upstream status' (
meta/recipes-core/base-passwd/base-passwd/0007-Add-wheel-group.patch) Unknown Upstream-Status value 'says' (meta/recipes-core/base-passwd/base-passwd/0007-Add-wheel-group.patch) Patches missing Upstream-Status: 0 (0%)
Patches with malformed Upstream-Status: 1 (0%
Sorry for that. I didn't expect it would parse any line starting with Upstream status...
Quoted 35 lines
Quoted 35 lines
meta/recipes-core/base-passwd/base-passwd/0007-Add-wheel-group.patch new file +15
-0+ +Upstream-Status: Inappropriate [enable feature] + +Signed-off-by: Louis Rannou <[email protected]> +Index: base-passwd-3.5.26/group.master +=================================================================== +--- base-passwd-3.5.29.orig/group.master ++++ base-passwd-3.5.29/group.master +@@ -38,5 +38,6 @@ + staff:*:50: + games:*:60: + shutdown:*:70: ++wheel:*:80: + users:*:100: + nogroup:*:65534:meta/recipes-core/base-passwd/base-passwd_3.6.1.bb +1
-0@@ -12,6 +12,7 @@ SRC_URI = "https://launchpad.net/debian/+archive/primary/+files/${BPN}_${PV}.tar file://0004-Add-an-input-group-for-the-dev-input-devices.patch \ file://0005-Add-kvm-group.patch \ file://0006-Make-it-possible-to-configure-whether-to-use-SELinux.patch \ + file://0007-Add-wheel-group.patch \ " SRC_URI[sha256sum] = "6ff369be59d586ba63c0c5fcb00f75f9953fe49db88bc6c6428f2c92866f79af"Signature · 2 lines
-- 2.41.0
Quoted 10 lines
Quoted 8 lines
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#182849): https://lists.openembedded.org/g/openembedded-core/message/182849
Mute This Topic: https://lists.openembedded.org/mt/99546759/3617179
Group Owner: [email protected]
Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
Louis