Input: soc_button_array - add invalid acpi_index DMI quirk handling
Subsystems (11)
Sasha Levin
maintainerPATCH 8/16 s390/purgatory: disable branch profiling
In reply to Sasha LevinFrom: Alexander Gordeev <[email protected]>
[ Upstream commit 03c5c83b70dca3729a3eb488e668e5044bd9a5ea ]
Avoid linker error for randomly generated config file that has CONFIG_BRANCH_PROFILE_NONE enabled and make it similar to riscv, x86 and also to commit 4bf3ec384edf ("s390: disable branch profiling for vdso").
--- arch/s390/purgatory/Makefile | 1 + 1 file changed, 1 insertion(+)
arch/s390/purgatory/Makefile +1 -0
@@ -26,6 +26,7 @@ KBUILD_CFLAGS += -Wno-pointer-sign -Wno-sign-compare KBUILD_CFLAGS += -fno-zero-initialized-in-bss -fno-builtin -ffreestanding KBUILD_CFLAGS += -c -MD -Os -m64 -msoft-float -fno-common KBUILD_CFLAGS += -fno-stack-protector +KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING KBUILD_CFLAGS += $(CLANG_FLAGS) KBUILD_CFLAGS += $(call cc-option,-fno-PIE) KBUILD_AFLAGS := $(filter-out -DCC_USING_EXPOLINE,$(KBUILD_AFLAGS))
Signature · 7 lines
2.39.2 _______________________________________________ linux-riscv mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-riscv
Sasha Levin
maintainerPATCH 10/16 drm/exynos: vidi: fix a wrong error return
In reply to Sasha LevinFrom: Inki Dae <[email protected]>
[ Upstream commit 4a059559809fd1ddbf16f847c4d2237309c08edf ]
Fix a wrong error return by dropping an error return.
When vidi driver is remvoed, if ctx->raw_edid isn't same as fake_edid_info then only what we have to is to free ctx->raw_edid so that driver removing can work correctly - it's not an error case.
--- drivers/gpu/drm/exynos/exynos_drm_vidi.c | 2 -- 1 file changed, 2 deletions(-)
drivers/gpu/drm/exynos/exynos_drm_vidi.c +0 -2
@@ -468,8 +468,6 @@ static int vidi_remove(struct platform_device *pdev)if (ctx->raw_edid != (struct edid *)fake_edid_info) {kfree (ctx->raw_edid); ctx->raw_edid =NULL ; - -return -EINVAL ; }component_del (&pdev->dev, &vidi_component_ops);
Signature · 1 line
2.39.2
Sasha Levin
maintainerPATCH 12/16 drm/radeon: fix race condition UAF in radeon_gem_set_domain_ioctl
In reply to Sasha LevinFrom: Min Li <[email protected]>
[ Upstream commit 982b173a6c6d9472730c3116051977e05d17c8c5 ]
Userspace can race to free the gobj(robj converted from), robj should not be accessed again after drm_gem_object_put, otherwith it will result in use-after-free.
--- drivers/gpu/drm/radeon/radeon_gem.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/gpu/drm/radeon/radeon_gem.c +1 -3
@@ -456,7 +456,6 @@ int radeon_gem_set_domain_ioctl(struct drm_device *dev, void *data,struct radeon_device *rdev = dev->dev_private;struct drm_radeon_gem_set_domain *args = data;struct drm_gem_object *gobj; -struct radeon_bo *robj;int r;/* for now if someone requests domain CPU -
@@ -469,13 +468,12 @@ int radeon_gem_set_domain_ioctl(struct drm_device *dev, void *data,up_read (&rdev->exclusive_lock);return -ENOENT ; } - robj =gem_to_radeon_bo (gobj); r =radeon_gem_set_domain (gobj, args->read_domains, args->write_domain);drm_gem_object_put (gobj);up_read (&rdev->exclusive_lock); - r =radeon_gem_handle_lockup (robj->rdev, r); + r =radeon_gem_handle_lockup (rdev, r);return r; }
Signature · 1 line
2.39.2
Sasha Levin
maintainerPATCH 15/16 vhost_vdpa: tell vqs about the negotiated
In reply to Sasha LevinFrom: Shannon Nelson <[email protected]>
[ Upstream commit 376daf317753ccb6b1ecbdece66018f7f6313a7f ]
As is done in the net, iscsi, and vsock vhost support, let the vdpa vqs know about the features that have been negotiated. This allows vhost to more safely make decisions based on the features, such as when using PACKED vs split queues.
Message-Id: <[email protected]>
--- drivers/vhost/vdpa.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
drivers/vhost/vdpa.c +13 -0
@@ -278,7 +278,10 @@ static long vhost_vdpa_set_features(struct vhost_vdpa *v, u64 __user *featurep) {struct vdpa_device *vdpa = v->vdpa;const struct vdpa_config_ops *ops = vdpa->config; +struct vhost_dev *d = &v->vdev; +u64 actual_features;u64 features; +int i;/* * It's not allowed to change the features after they have
@@ -293,6 +296,16 @@ static long vhost_vdpa_set_features(struct vhost_vdpa *v, u64 __user *featurep)if (vdpa_set_features (vdpa, features))return -EINVAL ; +/* let the vqs know what has been configured */ + actual_features = ops->get_driver_features (vdpa); +for (i =0 ; i < d->nvqs; ++i) { +struct vhost_virtqueue *vq = d->vqs[i]; + +mutex_lock (&vq->mutex); + vq->acked_features = actual_features; +mutex_unlock (&vq->mutex); + } +return 0 ; }
Signature · 1 line
2.39.2
Sasha Levin
maintainerPATCH 11/16 drm/exynos: fix race condition UAF in exynos_g2d_exec_ioctl
In reply to Sasha LevinFrom: Min Li <[email protected]>
[ Upstream commit 48bfd02569f5db49cc033f259e66d57aa6efc9a3 ]
If it is async, runqueue_node is freed in g2d_runqueue_worker on another worker thread. So in extreme cases, if g2d_runqueue_worker runs first, and then executes the following if statement, there will be use-after-free.
--- drivers/gpu/drm/exynos/exynos_drm_g2d.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/exynos/exynos_drm_g2d.c +1 -1
@@ -1335,7 +1335,7 @@ int exynos_g2d_exec_ioctl(struct drm_device *drm_dev, void *data,/* Let the runqueue know that there is work to do. */ queue_work (g2d->g2d_workq, &g2d->runqueue_work); -if (runqueue_node->async) +if (req->async) goto out;wait_for_completion (&runqueue_node->complete);
Signature · 1 line
2.39.2
Sasha Levin
maintainerPATCH 16/16 vhost_net: revert upend_idx only on retriable error
In reply to Sasha LevinFrom: Andrey Smetanin <[email protected]>
[ Upstream commit 1f5d2e3bab16369d5d4b4020a25db4ab1f4f082c ]
Fix possible virtqueue used buffers leak and corresponding stuck in case of temporary -EIO from sendmsg() which is produced by tun driver while backend device is not up.
In case of no-retriable error and zcopy do not revert upend_idx to pass packet data (that is update used_idx in corresponding vhost_zerocopy_signal_used()) as if packet data has been transferred successfully.
v2: set vq->heads[ubuf->desc].len equal to VHOST_DMA_DONE_LEN in case of fake successful transmit.
Message-Id: <[email protected]>
--- drivers/vhost/net.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)
drivers/vhost/net.c +8 -3
@@ -933,13 +933,18 @@ static void handle_tx_zerocopy(struct vhost_net *net, struct socket *sock) err = sock->ops->sendmsg (sock, &msg, len);if (unlikely (err <0 )) { +bool retry = err == -EAGAIN || err == -ENOMEM || err == -ENOBUFS ; +if (zcopy_used) {if (vq->heads[ubuf->desc].len ==VHOST_DMA_IN_PROGRESS )vhost_net_ubuf_put (ubufs); - nvq->upend_idx = ((unsigned )nvq->upend_idx -1 ) - %UIO_MAXIOV ; +if (retry) + nvq->upend_idx = ((unsigned )nvq->upend_idx -1 ) + %UIO_MAXIOV ; +else + vq->heads[ubuf->desc].len =VHOST_DMA_DONE_LEN ; } -if (err == -EAGAIN || err == -ENOMEM || err == -ENOBUFS ) { +if (retry) {vhost_discard_vq_desc (vq,1 );vhost_net_enable_vq (net, vq);break ;
Signature · 1 line
2.39.2
Sasha Levin
maintainerPATCH 9/16 ARM: dts: Fix erroneous ADS touchscreen polarities
In reply to Sasha LevinFrom: Linus Walleij <[email protected]>
[ Upstream commit 4a672d500bfd6bb87092c33d5a2572c3d0a1cf83 ]
Several device tree files get the polarity of the pendown-gpios
wrong: this signal is active low. Fix up all incorrect flags, so that operating systems can rely on the flag being correctly set.
--- arch/arm/boot/dts/am57xx-cl-som-am57x.dts | 2 +- arch/arm/boot/dts/at91sam9261ek.dts | 2 +- arch/arm/boot/dts/imx7d-pico-hobbit.dts | 2 +- arch/arm/boot/dts/imx7d-sdb.dts | 2 +- arch/arm/boot/dts/omap3-cm-t3x.dtsi | 2 +- arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi | 2 +- arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 2 +- arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi | 2 +- arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi | 2 +- arch/arm/boot/dts/omap3-pandora-common.dtsi | 2 +- arch/arm/boot/dts/omap5-cm-t54.dts | 2 +- 11 files changed, 11 insertions(+), 11 deletions(-)
arch/arm/boot/dts/am57xx-cl-som-am57x.dts +1 -1
@@ -527,7 +527,7 @@ touchscreen@1 { interrupt-parent = <&gpio1>; interrupts = <31 0>; - pendown-gpio = <&gpio1 31 0>; + pendown-gpio = <&gpio1 31 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <0x0>;
arch/arm/boot/dts/at91sam9261ek.dts +1 -1
@@ -156,7 +156,7 @@ tsc2046@2 { compatible = "ti,ads7843"; interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>; spi-max-frequency = <3000000>; - pendown-gpio = <&pioC 2 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&pioC 2 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <150>; ti,x-max = /bits/ 16 <3830>;
arch/arm/boot/dts/imx7d-pico-hobbit.dts +1 -1
@@ -64,7 +64,7 @@ ads7846@0 { interrupt-parent = <&gpio2>; interrupts = <7 0>; spi-max-frequency = <1000000>; - pendown-gpio = <&gpio2 7 0>; + pendown-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>; vcc-supply = <®_3p3v>; ti,x-min = /bits/ 16 <0>; ti,x-max = /bits/ 16 <4095>;
arch/arm/boot/dts/imx7d-sdb.dts +1 -1
@@ -205,7 +205,7 @@ tsc2046@0 { pinctrl-0 = <&pinctrl_tsc2046_pendown>; interrupt-parent = <&gpio2>; interrupts = <29 0>; - pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio2 29 GPIO_ACTIVE_LOW>; touchscreen-max-pressure = <255>; wakeup-source; };
arch/arm/boot/dts/omap3-cm-t3x.dtsi +1 -1
@@ -227,7 +227,7 @@ ads7846@0 { interrupt-parent = <&gpio2>; interrupts = <25 0>; /* gpio_57 */ - pendown-gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio2 25 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>;
arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi +1 -1
@@ -54,7 +54,7 @@ ads7846@0 { interrupt-parent = <&gpio1>; interrupts = <27 0>; /* gpio_27 */ - pendown-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio1 27 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>;
arch/arm/boot/dts/omap3-lilly-a83x.dtsi +1 -1
@@ -311,7 +311,7 @@ tsc2046@0 { interrupt-parent = <&gpio1>; interrupts = <8 0>; /* boot6 / gpio_8 */ spi-max-frequency = <1000000>; - pendown-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>; vcc-supply = <®_vcc3>; pinctrl-names = "default"; pinctrl-0 = <&tsc2048_pins>;
arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi +1 -1
@@ -149,7 +149,7 @@ ads7846@0 { interrupt-parent = <&gpio4>; interrupts = <18 0>; /* gpio_114 */ - pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>;
arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi +1 -1
@@ -160,7 +160,7 @@ ads7846@0 { interrupt-parent = <&gpio4>; interrupts = <18 0>; /* gpio_114 */ - pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>;
arch/arm/boot/dts/omap3-pandora-common.dtsi +1 -1
@@ -651,7 +651,7 @@ tsc2046@0 { pinctrl-0 = <&penirq_pins>; interrupt-parent = <&gpio3>; interrupts = <30 IRQ_TYPE_NONE>; /* GPIO_94 */ - pendown-gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio3 30 GPIO_ACTIVE_LOW>; vcc-supply = <&vaux4>; ti,x-min = /bits/ 16 <0>;
arch/arm/boot/dts/omap5-cm-t54.dts +1 -1
@@ -354,7 +354,7 @@ ads7846@0 { interrupt-parent = <&gpio1>; interrupts = <15 0>; /* gpio1_wk15 */ - pendown-gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio1 15 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <0x0>;
Signature · 7 lines
2.39.2 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Sasha Levin
maintainerPATCH 4/16 ASoC: simple-card: Add missing of_node_put() in case of error
In reply to Sasha LevinFrom: Herve Codina <[email protected]>
[ Upstream commit 8938f75a5e35c597a647c28984a0304da7a33d63 ]
In the error path, a of_node_put() for platform is missing. Just add it.
--- sound/soc/generic/simple-card.c | 1 + 1 file changed, 1 insertion(+)
sound/soc/generic/simple-card.c +1 -0
@@ -417,6 +417,7 @@ static int __simple_for_each_link(struct asoc_simple_priv *priv,if (ret <0 ) {of_node_put (codec); +of_node_put (plat);of_node_put (np); goto error; }
Signature · 1 line
2.39.2
Sasha Levin
maintainerPATCH 6/16 soundwire: qcom: add proper error paths in qcom_swrm_startup()
In reply to Sasha LevinFrom: Krzysztof Kozlowski <[email protected]>
[ Upstream commit 99e09b9c0ab43346c52f2787ca4e5c4b1798362e ]
Reverse actions in qcom_swrm_startup() error paths to avoid leaking stream memory and keeping runtime PM unbalanced.
--- drivers/soundwire/qcom.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-)
drivers/soundwire/qcom.c +13 -4
@@ -1026,8 +1026,10 @@ static int qcom_swrm_startup(struct snd_pcm_substream *substream,int ret, i; sruntime =sdw_alloc_stream (dai->name); -if (!sruntime) -return -ENOMEM ; +if (!sruntime) { + ret = -ENOMEM ; + goto err_alloc; + } ctrl->sruntime[dai->id] = sruntime;
@@ -1037,12 +1039,19 @@ static int qcom_swrm_startup(struct snd_pcm_substream *substream,if (ret <0 && ret != -ENOTSUPP ) {dev_err (dai->dev,"Failed to set sdw stream on %s\n" , codec_dai->name); -sdw_release_stream (sruntime); -return ret; + goto err_set_stream; } }return 0 ; + +err_set_stream: +sdw_release_stream (sruntime); +err_alloc: +pm_runtime_mark_last_busy (ctrl->dev); +pm_runtime_put_autosuspend (ctrl->dev); + +return ret; } static void qcom_swrm_shutdown(struct snd_pcm_substream *substream,
Signature · 1 line
2.39.2
Sasha Levin
maintainerPATCH 5/16 soundwire: dmi-quirks: add new mapping for HP Spectre x360
In reply to Sasha LevinFrom: Pierre-Louis Bossart <[email protected]>
[ Upstream commit 700581ede41d029403feec935df4616309696fd7 ]
A BIOS/DMI update seems to have broken some devices, let's add a new mapping.
--- drivers/soundwire/dmi-quirks.c | 7 +++++++ 1 file changed, 7 insertions(+)
drivers/soundwire/dmi-quirks.c +7 -0
@@ -63,6 +63,13 @@ static const struct dmi_system_id adr_remap_quirk_table[] = { }, .driver_data = (void *)intel_tgl_bios, }, + { + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"HP" ), + DMI_MATCH(DMI_BOARD_NAME, "8709"), + }, + .driver_data = (void *)intel_tgl_bios, + }, {/* quirk used for NUC15 'Bishop County' LAPBC510 and LAPBC710 skews */ .matches = {
Signature · 1 line
2.39.2
Sasha Levin
maintainerPATCH 7/16 ASoC: nau8824: Add quirk to active-high jack-detect
In reply to Sasha LevinFrom: Edson Juliano Drosdeck <[email protected]>
[ Upstream commit e384dba03e3294ce7ea69e4da558e9bf8f0e8946 ]
Add entries for Positivo laptops: CW14Q01P, K1424G, N14ZP74G to the DMI table, so that active-high jack-detect will work properly on these laptops.
--- sound/soc/codecs/nau8824.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)
sound/soc/codecs/nau8824.c +24 -0
@@ -1866,6 +1866,30 @@ static const struct dmi_system_id nau8824_quirk_table[] = { }, .driver_data = (void *)(NAU8824_JD_ACTIVE_HIGH), }, + { + /* Positivo CW14Q01P */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Positivo Tecnologia SA"), + DMI_MATCH(DMI_BOARD_NAME, "CW14Q01P"), + }, + .driver_data = (void *)(NAU8824_JD_ACTIVE_HIGH), + }, + { + /* Positivo K1424G */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Positivo Tecnologia SA"), + DMI_MATCH(DMI_BOARD_NAME, "K1424G"), + }, + .driver_data = (void *)(NAU8824_JD_ACTIVE_HIGH), + }, + { + /* Positivo N14ZP74G */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Positivo Tecnologia SA"), + DMI_MATCH(DMI_BOARD_NAME, "N14ZP74G"), + }, + .driver_data = (void *)(NAU8824_JD_ACTIVE_HIGH), + }, {} };
Signature · 1 line
2.39.2
Sasha Levin
maintainerPATCH 13/16 Revert "ext4: don't clear SB_RDONLY when remounting r/w until quota is re-enabled"
In reply to Sasha LevinFrom: Theodore Ts'o <[email protected]>
[ Upstream commit 1b29243933098cdbc31b579b5616e183b4275e2f ]
This reverts commit a44be64bbecb15a452496f60db6eacfee2b59c79.
--- fs/ext4/super.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-)
fs/ext4/super.c +1 -5
@@ -5748,7 +5748,6 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data)struct ext4_mount_options old_opts;ext4_group_t g;int err =0 ; -int enable_rw =0 ;#ifdef CONFIG_QUOTA int enable_quota =0 ;int i, j;
@@ -5949,7 +5948,7 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data)if (err) goto restore_opts; - enable_rw =1 ; + sb->s_flags &= ~SB_RDONLY ;if (ext4_has_feature_mmp (sb)) { err =ext4_multi_mount_protect (sb,le64_to_cpu (es->s_mmp_block));
@@ -5996,9 +5995,6 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data)if (!test_opt (sb,BLOCK_VALIDITY ) && sbi->s_system_blks)ext4_release_system_zone (sb); -if (enable_rw) - sb->s_flags &= ~SB_RDONLY ; -/* * Reinitialize lazy itable initialization thread based on * current settings
Signature · 1 line
2.39.2
Sasha Levin
maintainerPATCH 2/16 s390/cio: unregister device when the only path is gone
In reply to Sasha LevinFrom: Vineeth Vijayan <[email protected]>
[ Upstream commit 89c0c62e947a01e7a36b54582fd9c9e346170255 ]
Currently, if the device is offline and all the channel paths are either configured or varied offline, the associated subchannel gets unregistered. Don't unregister the subchannel, instead unregister offline device.
--- drivers/s390/cio/device.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/s390/cio/device.c +4 -1
@@ -1379,6 +1379,7 @@ void ccw_device_set_notoper(struct ccw_device *cdev)enum io_sch_action {IO_SCH_UNREG ,IO_SCH_ORPH_UNREG , +IO_SCH_UNREG_CDEV ,IO_SCH_ATTACH ,IO_SCH_UNREG_ATTACH ,IO_SCH_ORPH_ATTACH ,
@@ -1411,7 +1412,7 @@ static enum io_sch_action sch_get_action(struct subchannel *sch) }if ((sch->schib.pmcw.pam & sch->opm) ==0 ) {if (ccw_device_notify (cdev,CIO_NO_PATH ) !=NOTIFY_OK ) -return IO_SCH_UNREG ; +return IO_SCH_UNREG_CDEV ;return IO_SCH_DISC ; }if (device_is_disconnected (cdev))
@@ -1473,6 +1474,7 @@ static int io_subchannel_sch_event(struct subchannel *sch, int process)case IO_SCH_ORPH_ATTACH :ccw_device_set_disconnected (cdev);break ; +case IO_SCH_UNREG_CDEV :case IO_SCH_UNREG_ATTACH :case IO_SCH_UNREG :if (!cdev)
@@ -1506,6 +1508,7 @@ static int io_subchannel_sch_event(struct subchannel *sch, int process)if (rc) goto out;break ; +case IO_SCH_UNREG_CDEV :case IO_SCH_UNREG_ATTACH :spin_lock_irqsave (sch->lock, flags);sch_set_cdev (sch,NULL );
Signature · 1 line
2.39.2
Sasha Levin
maintainerPATCH 1/16 Input: soc_button_array - add invalid acpi_index DMI quirk handling
From: Hans de Goede <[email protected]>
[ Upstream commit 20a99a291d564a559cc2fd013b4824a3bb3f1db7 ]
Some devices have a wrong entry in their button array which points to a GPIO which is required in another driver, so soc_button_array must not claim it.
A specific example of this is the Lenovo Yoga Book X90F / X90L, where the PNP0C40 home button entry points to a GPIO which is not a home button and which is required by the lenovo-yogabook driver.
Add a DMI quirk table which can specify an ACPI GPIO resource index which should be skipped; and add an entry for the Lenovo Yoga Book X90F / X90L to this new DMI quirk table.
--- drivers/input/misc/soc_button_array.c | 30 +++++++++++++++++++++++++++ 1 file changed, 30 insertions(+)
drivers/input/misc/soc_button_array.c +30 -0
@@ -108,6 +108,27 @@ static const struct dmi_system_id dmi_use_low_level_irq[] = { {}/* Terminating entry */ }; +/* +* Some devices have a wrong entry which points to a GPIO which is +* required in another driver, so this driver must not claim it. +*/ +static const struct dmi_system_id dmi_invalid_acpi_index[] = { + { +/* +* Lenovo Yoga Book X90F / X90L, the PNP0C40 home button entry +* points to a GPIO which is not a home button and which is +* required by the lenovo-yogabook driver. +*/ + .matches = { +DMI_EXACT_MATCH (DMI_SYS_VENDOR ,"Intel Corporation" ), +DMI_EXACT_MATCH (DMI_PRODUCT_NAME ,"CHERRYVIEW D1 PLATFORM" ), +DMI_EXACT_MATCH (DMI_PRODUCT_VERSION ,"YETI-11" ), + }, + .driver_data = (void *)1l , + }, + {}/* Terminating entry */ +}; +/* * Get the Nth GPIO number from the ACPI object. */
@@ -137,6 +158,8 @@ soc_button_device_create(struct platform_device *pdev,struct platform_device *pd;struct gpio_keys_button *gpio_keys;struct gpio_keys_platform_data *gpio_keys_pdata; +const struct dmi_system_id *dmi_id; +int invalid_acpi_index =-1 ;int error, gpio, irq;int n_buttons =0 ;
@@ -154,10 +177,17 @@ soc_button_device_create(struct platform_device *pdev, gpio_keys = (void *)(gpio_keys_pdata +1 ); n_buttons =0 ; + dmi_id =dmi_first_match (dmi_invalid_acpi_index); +if (dmi_id) + invalid_acpi_index = (long )dmi_id->driver_data; +for (info = button_info; info->name; info++) {if (info->autorepeat != autorepeat)continue ; +if (info->acpi_index == invalid_acpi_index) +continue ; + error =soc_button_lookup_gpio (&pdev->dev, info->acpi_index, &gpio, &irq);if (error || irq <0 ) {/*
Signature · 1 line
2.39.2
Sasha Levin
maintainerPATCH 3/16 spi: lpspi: disable lpspi module irq in DMA mode
From: Clark Wang <[email protected]>
[ Upstream commit 9728fb3ce11729aa8c276825ddf504edeb00611d ]
When all bits of IER are set to 0, we still can observe the lpspi irq events when using DMA mode to transfer data.
So disable irq to avoid the too much irq events.
--- drivers/spi/spi-fsl-lpspi.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/spi/spi-fsl-lpspi.c +6 -1
@@ -906,9 +906,14 @@ static int fsl_lpspi_probe(struct platform_device *pdev) ret =fsl_lpspi_dma_init (&pdev->dev, fsl_lpspi, controller);if (ret == -EPROBE_DEFER ) goto out_pm_get; -if (ret <0 )dev_err (&pdev->dev,"dma setup error %d, use pio\n" , ret); +else +/* +* disable LPSPI module IRQ when enable DMA mode successfully, +* to prevent the unexpected LPSPI module IRQ events. +*/ +disable_irq (irq); ret =devm_spi_register_controller (&pdev->dev, controller);if (ret <0 ) {
Signature · 1 line
2.39.2
Sasha Levin
maintainerPATCH 14/16 ext4: only check dquot_initialize_needed() when debugging
In reply to Sasha LevinFrom: Theodore Ts'o <[email protected]>
[ Upstream commit dea9d8f7643fab07bf89a1155f1f94f37d096a5e ]
ext4_xattr_block_set() relies on its caller to call dquot_initialize() on the inode. To assure that this has happened there are WARN_ON checks. Unfortunately, this is subject to false positives if there is an antagonist thread which is flipping the file system at high rates between r/o and rw. So only do the check if EXT4_XATTR_DEBUG is enabled.
--- fs/ext4/xattr.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
fs/ext4/xattr.c +4 -2
@@ -2006,8 +2006,9 @@ ext4_xattr_block_set(handle_t *handle, struct inode *inode,else {u32 ref; +#ifdef EXT4_XATTR_DEBUG WARN_ON_ONCE (dquot_initialize_needed (inode)); - +#endif /* The old block is released after updating the inode. */ error = dquot_alloc_block(inode,
@@ -2070,8 +2071,9 @@ ext4_xattr_block_set(handle_t *handle, struct inode *inode,/* We need to allocate a new block */ ext4_fsblk_t goal, block; +#ifdef EXT4_XATTR_DEBUG WARN_ON_ONCE (dquot_initialize_needed (inode)); - +#endif goal =ext4_group_first_block_no (sb,EXT4_I (inode)->i_block_group); block = ext4_new_meta_blocks(handle, inode, goal, 0,
Signature · 1 line
2.39.2