Skip to contentSkip to conversation

s390x: Add PV SIE intercepts and ipl tests

PATCH In review Janosch Frank 2 participants 11 messages Jun 19, 2023 – Jun 20, 2023

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v5 cover s390x: Add PV SIE intercepts and ipl tests

Extend the coverage of the UVC interface.
The patches might be a bit dusty, they've been on a branch for a while.

v5:
- Added "lib: s390x: uv: Introduce UV validity function"
- Added "groups = pv-host" to unittests.cfg entries
- Added pv-icptcode wrong vm handle test
- Smaller fixes due to review
- Added revs/acks
v4:
- Renamed uv_guest_requirement_checks() to uv_host_requirement_checks()
- Now using report_prefix_pushf()
- Smaller fixes due to review
v3:
- Reworked a large portion of the tests
- Introduced a new function that checks for required facilities and memory for tests that start PV guests
- Shortened snippet file names
- Moved checks from report to asserts to decrease test noise
- Introduced diag PV intercept data check function
v2:
- Re-worked the cpu timer tests
- Testing both pages for 112 intercept
- Added skip on insufficient memory
- Fixed comments in pv-ipl.c

Janosch Frank (8):
lib: s390x: sie: Fix sie_get_validity() no validity handling
lib: s390x: uv: Introduce UV validity function
lib: s390x: uv: Add intercept data check library function
s390x: pv-diags: Drop snippet from snippet names
lib: s390x: uv: Add pv host requirement check function
s390x: pv: Add sie entry intercept and validity test
s390x: pv: Add IPL reset tests
s390x: pv-diags: Add the test to unittests.conf

 lib/s390x/pv_icptdata.h                       |  42 ++
 lib/s390x/sie.c                               |   8 +-
 lib/s390x/snippet.h                           |   7 +
 lib/s390x/uv.c                                |  20 +
 lib/s390x/uv.h                                |   8 +
 s390x/Makefile                                |  13 +-
 s390x/pv-diags.c                              |  70 ++--
 s390x/pv-icptcode.c                           | 376 ++++++++++++++++++
 s390x/pv-ipl.c                                | 143 +++++++
 s390x/snippets/asm/icpt-loop.S                |  15 +
 s390x/snippets/asm/loop.S                     |  13 +
 .../{snippet-pv-diag-288.S => pv-diag-288.S}  |   0
 s390x/snippets/asm/pv-diag-308.S              |  51 +++
 .../{snippet-pv-diag-500.S => pv-diag-500.S}  |   0
 ...nippet-pv-diag-yield.S => pv-diag-yield.S} |   0
 s390x/snippets/asm/pv-icpt-112.S              |  81 ++++
 s390x/snippets/asm/pv-icpt-vir-timing.S       |  21 +
 s390x/unittests.cfg                           |  16 +
 18 files changed, 841 insertions(+), 43 deletions(-)
 create mode 100644 lib/s390x/pv_icptdata.h
 create mode 100644 s390x/pv-icptcode.c
 create mode 100644 s390x/pv-ipl.c
 create mode 100644 s390x/snippets/asm/icpt-loop.S
 create mode 100644 s390x/snippets/asm/loop.S
 rename s390x/snippets/asm/{snippet-pv-diag-288.S => pv-diag-288.S} (100%)
 create mode 100644 s390x/snippets/asm/pv-diag-308.S
 rename s390x/snippets/asm/{snippet-pv-diag-500.S => pv-diag-500.S} (100%)
 rename s390x/snippets/asm/{snippet-pv-diag-yield.S => pv-diag-yield.S} (100%)
 create mode 100644 s390x/snippets/asm/pv-icpt-112.S
 create mode 100644 s390x/snippets/asm/pv-icpt-vir-timing.S
Signature · 1 line
2.34.1
#1 lore raw

PATCH v5 1/8 lib: s390x: sie: Fix sie_get_validity() no validity handling

Rather than asserting, we can return a value that's designated as a programming only value to indicate that there has been no validity.

The SIE instruction will never write 0xffff as a validity code so let's just use that constant.

---
 lib/s390x/sie.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
lib/s390x/sie.c +7 -1
index 9241b4b4..b44febde 100644
@@ -23,7 +23,13 @@ void sie_expect_validity(struct vm *vm)
 
 uint16_t sie_get_validity(struct vm *vm)
 {
-	assert(vm->sblk->icptcode == ICPT_VALIDITY);
+	/*
+	 * 0xffff will never be returned by SIE, so we can indicate a
+	 * missing validity via this value.
+	 */
+	if (vm->sblk->icptcode != ICPT_VALIDITY)
+		return 0xffff;
+
 	return vm->sblk->ipb >> 16;
 }
 
Signature · 1 line
2.34.1
Reviewed-by on v5 1/8
#2 lore raw

Re: [kvm-unit-tests PATCH v5 1/8] lib: s390x: sie: Fix sie_get_validity() no validity handling

Quoting Janosch Frank (2023-06-19 10:33:22)

Quoted 7 lines

Rather than asserting, we can return a value that's designated as a programming only value to indicate that there has been no validity.

The SIE instruction will never write 0xffff as a validity code so let's just use that constant.

That's a good solution.

#3 lore raw

PATCH v5 2/8 lib: s390x: uv: Introduce UV validity function

In reply to Janosch Frank

PV related validities are in the 0x20** range but the last byte might be implementation specific, so everytime we check for a UV validity we need to mask the last byte.

Let's add a function that checks for a UV validity and returns a boolean.

---
 lib/s390x/uv.h | 7 +++++++
 1 file changed, 7 insertions(+)
lib/s390x/uv.h +7 -0
index 5fe29bda..78b979b7 100644
@@ -35,4 +35,11 @@ static inline void uv_setup_asces(void)
 	lctlg(13, asce);
 }
 
+static inline bool uv_validity_check(struct vm *vm)
+{
+	uint16_t vir = sie_get_validity(vm);
+
+	return vm->sblk->icptcode == ICPT_VALIDITY && (vir & 0xff00) == 0x2000;
+}
+
 #endif /* UV_H */
Signature · 1 line
2.34.1
#4 lore raw

PATCH v5 3/8 lib: s390x: uv: Add intercept data check library function

In reply to Janosch Frank

When working with guests it's essential to check the SIE intercept data for the correct values. Fortunately on PV guests these values are constants so we can create check functions which test for the constants.

While we're at it let's make pv-diags.c use this new function.

---
 lib/s390x/pv_icptdata.h | 42 +++++++++++++++++++++++++++++++++++++++++
 s390x/pv-diags.c        | 14 ++++++--------
 2 files changed, 48 insertions(+), 8 deletions(-)
 create mode 100644 lib/s390x/pv_icptdata.h
lib/s390x/pv_icptdata.h new file +42 -0
new file mode 100644
index 00000000..4746117e
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Commonly used checks for PV SIE intercept data
+ *
+ * Copyright IBM Corp. 2023
+ * Author: Janosch Frank <[email protected]>
+ */
+
+#ifndef _S390X_PV_ICPTDATA_H_
+#define _S390X_PV_ICPTDATA_H_
+
+#include <sie.h>
+
+/*
+ * Checks the diagnose instruction intercept data for consistency with
+ * the constants defined by the PV SIE architecture
+ *
+ * Supports: 0x44, 0x9c, 0x288, 0x308, 0x500
+ */
+static bool pv_icptdata_check_diag(struct vm *vm, int diag)
+{
+	int icptcode;
+
+	switch (diag) {
+	case 0x44:
+	case 0x9c:
+	case 0x288:
+	case 0x308:
+		icptcode = ICPT_PV_NOTIFY;
+		break;
+	case 0x500:
+		icptcode = ICPT_PV_INSTR;
+		break;
+	default:
+		/* If a new diag is introduced add it to the cases above! */
+		assert(0);
+	}
+
+	return vm->sblk->icptcode == icptcode && vm->sblk->ipa == 0x8302 &&
+	       vm->sblk->ipb == 0x50000000 && vm->save_area.guest.grs[5] == diag;
+}
+#endif
s390x/pv-diags.c +6 -8
index 5165937a..096ac61f 100644
@@ -9,6 +9,7 @@
  */
 #include <libcflat.h>
 #include <snippet.h>
+#include <pv_icptdata.h>
 #include <sie.h>
 #include <sclp.h>
 #include <asm/facility.h>
@@ -31,8 +32,7 @@ static void test_diag_500(void)
 			size_gbin, size_hdr, SNIPPET_UNPACK_OFF);
 
 	sie(&vm);
-	report(vm.sblk->icptcode == ICPT_PV_INSTR && vm.sblk->ipa == 0x8302 &&
-	       vm.sblk->ipb == 0x50000000 && vm.save_area.guest.grs[5] == 0x500,
+	report(pv_icptdata_check_diag(&vm, 0x500),
 	       "intercept values");
 	report(vm.save_area.guest.grs[1] == 1 &&
 	       vm.save_area.guest.grs[2] == 2 &&
@@ -45,9 +45,8 @@ static void test_diag_500(void)
 	 */
 	vm.sblk->iictl = IICTL_CODE_OPERAND;
 	sie(&vm);
-	report(vm.sblk->icptcode == ICPT_PV_NOTIFY && vm.sblk->ipa == 0x8302 &&
-	       vm.sblk->ipb == 0x50000000 && vm.save_area.guest.grs[5] == 0x9c
-	       && vm.save_area.guest.grs[0] == PGM_INT_CODE_OPERAND,
+	report(pv_icptdata_check_diag(&vm, 0x9c) &&
+	       vm.save_area.guest.grs[0] == PGM_INT_CODE_OPERAND,
 	       "operand exception");
 
 	/*
@@ -58,9 +57,8 @@ static void test_diag_500(void)
 	vm.sblk->iictl = IICTL_CODE_SPECIFICATION;
 	/* Inject PGM, next exit should be 9c */
 	sie(&vm);
-	report(vm.sblk->icptcode == ICPT_PV_NOTIFY && vm.sblk->ipa == 0x8302 &&
-	       vm.sblk->ipb == 0x50000000 && vm.save_area.guest.grs[5] == 0x9c
-	       && vm.save_area.guest.grs[0] == PGM_INT_CODE_SPECIFICATION,
+	report(pv_icptdata_check_diag(&vm, 0x9c) &&
+	       vm.save_area.guest.grs[0] == PGM_INT_CODE_SPECIFICATION,
 	       "specification exception");
 
 	/* No need for cleanup, just tear down the VM */
Signature · 1 line
2.34.1
#5 lore raw

PATCH v5 4/8 s390x: pv-diags: Drop snippet from snippet names

In reply to Janosch Frank

It's a bit redundant.

---
 s390x/Makefile                                |  6 +--
 s390x/pv-diags.c                              | 48 +++++++++----------
 .../{snippet-pv-diag-288.S => pv-diag-288.S}  |  0
 .../{snippet-pv-diag-500.S => pv-diag-500.S}  |  0
 ...nippet-pv-diag-yield.S => pv-diag-yield.S} |  0
 5 files changed, 27 insertions(+), 27 deletions(-)
 rename s390x/snippets/asm/{snippet-pv-diag-288.S => pv-diag-288.S} (100%)
 rename s390x/snippets/asm/{snippet-pv-diag-500.S => pv-diag-500.S} (100%)
 rename s390x/snippets/asm/{snippet-pv-diag-yield.S => pv-diag-yield.S} (100%)
s390x/Makefile +3 -3
index a80db538..8d1cfc7c 100644
@@ -122,9 +122,9 @@ snippet_lib = $(snippet_asmlib) lib/auxinfo.o
 $(TEST_DIR)/mvpg-sie.elf: snippets = $(SNIPPET_DIR)/c/mvpg-snippet.gbin
 $(TEST_DIR)/spec_ex-sie.elf: snippets = $(SNIPPET_DIR)/c/spec_ex.gbin
 
-$(TEST_DIR)/pv-diags.elf: pv-snippets += $(SNIPPET_DIR)/asm/snippet-pv-diag-yield.gbin
-$(TEST_DIR)/pv-diags.elf: pv-snippets += $(SNIPPET_DIR)/asm/snippet-pv-diag-288.gbin
-$(TEST_DIR)/pv-diags.elf: pv-snippets += $(SNIPPET_DIR)/asm/snippet-pv-diag-500.gbin
+$(TEST_DIR)/pv-diags.elf: pv-snippets += $(SNIPPET_DIR)/asm/pv-diag-yield.gbin
+$(TEST_DIR)/pv-diags.elf: pv-snippets += $(SNIPPET_DIR)/asm/pv-diag-288.gbin
+$(TEST_DIR)/pv-diags.elf: pv-snippets += $(SNIPPET_DIR)/asm/pv-diag-500.gbin
 
 ifneq ($(GEN_SE_HEADER),)
 snippets += $(pv-snippets)
s390x/pv-diags.c +24 -24

75 lines not on this page · raw message

s390x/snippets/asm/pv-diag-288.S renamed from s390x/snippets/asm/snippet-pv-diag-288.S +0 -0
similarity index 100%
rename from s390x/snippets/asm/snippet-pv-diag-288.S
rename to s390x/snippets/asm/pv-diag-288.S
s390x/snippets/asm/pv-diag-500.S renamed from s390x/snippets/asm/snippet-pv-diag-500.S +0 -0
similarity index 100%
rename from s390x/snippets/asm/snippet-pv-diag-500.S
rename to s390x/snippets/asm/pv-diag-500.S
s390x/snippets/asm/pv-diag-yield.S renamed from s390x/snippets/asm/snippet-pv-diag-yield.S +0 -0
similarity index 100%
rename from s390x/snippets/asm/snippet-pv-diag-yield.S
rename to s390x/snippets/asm/pv-diag-yield.S
Signature · 1 line
2.34.1
#6 lore raw

PATCH v5 5/8 lib: s390x: uv: Add pv host requirement check function

In reply to Janosch Frank

When running PV guests some of the UV memory needs to be allocated with > 31 bit addresses which means tests with PV guests will always need a lot more memory than other tests.
Additionally facilities nr 158 and sclp.sief2 need to be available.

Let's add a function that checks for these requirements and prints a helpful skip message.

---
 lib/s390x/snippet.h |  7 +++++++
 lib/s390x/uv.c      | 20 ++++++++++++++++++++
 lib/s390x/uv.h      |  1 +
 s390x/pv-diags.c    |  8 +-------
 4 files changed, 29 insertions(+), 7 deletions(-)
lib/s390x/snippet.h +7 -0
index 57045994..11ec54c3 100644
@@ -30,6 +30,13 @@
 #define SNIPPET_HDR_LEN(type, file) \
 	((uintptr_t)SNIPPET_HDR_END(type, file) - (uintptr_t)SNIPPET_HDR_START(type, file))
 
+/*
+ * Some of the UV memory needs to be allocated with >31 bit
+ * addresses which means we need a lot more memory than other
+ * tests.
+ */
+#define SNIPPET_PV_MIN_MEM_SIZE	(SZ_1M * 2200UL)
+
 #define SNIPPET_PV_TWEAK0	0x42UL
 #define SNIPPET_PV_TWEAK1	0UL
 #define SNIPPET_UNPACK_OFF	0
lib/s390x/uv.c +20 -0
index 383271a5..4ccb7bde 100644
@@ -18,6 +18,7 @@
 #include <asm/uv.h>
 #include <uv.h>
 #include <sie.h>
+#include <snippet.h>
 
 static struct uv_cb_qui uvcb_qui = {
 	.header.cmd = UVC_CMD_QUI,
@@ -38,6 +39,25 @@ bool uv_os_is_host(void)
 	return test_facility(158) && uv_query_test_call(BIT_UVC_CMD_INIT_UV);
 }
 
+bool uv_host_requirement_checks(void)
+{
+	if (!test_facility(158)) {
+		report_skip("UV Call facility unavailable");
+		return false;
+	}
+	if (!sclp_facilities.has_sief2) {
+		report_skip("SIEF2 facility unavailable");
+		return false;
+	}
+	if (get_ram_size() < SNIPPET_PV_MIN_MEM_SIZE) {
+		report_skip("Not enough memory. This test needs about %ld MB of memory",
+			    SNIPPET_PV_MIN_MEM_SIZE / 1024 / 1024);
+		return false;
+	}
+
+	return true;
+}
+
 bool uv_query_test_call(unsigned int nr)
 {
 	/* Query needs to be called first */
lib/s390x/uv.h +1 -0
index 78b979b7..286933ca 100644
@@ -7,6 +7,7 @@
 
 bool uv_os_is_guest(void);
 bool uv_os_is_host(void);
+bool uv_host_requirement_checks(void);
 bool uv_query_test_call(unsigned int nr);
 const struct uv_cb_qui *uv_get_query_data(void);
 void uv_init(void);
s390x/pv-diags.c +1 -7
index fa4e5532..3193ad99 100644
@@ -149,14 +149,8 @@ static void test_diag_yield(void)
 int main(void)
 {
 	report_prefix_push("pv-diags");
-	if (!test_facility(158)) {
-		report_skip("UV Call facility unavailable");
+	if (!uv_host_requirement_checks())
 		goto done;
-	}
-	if (!sclp_facilities.has_sief2) {
-		report_skip("SIEF2 facility unavailable");
-		goto done;
-	}
 
 	uv_setup_asces();
 	snippet_setup_guest(&vm, true);
Signature · 1 line
2.34.1
#7 lore raw

Re: [kvm-unit-tests PATCH v5 5/8] lib: s390x: uv: Add pv host requirement check function

Quoted 10 lines · Janosch Frank

When running PV guests some of the UV memory needs to be allocated with > 31 bit addresses which means tests with PV guests will always need a lot more memory than other tests.
Additionally facilities nr 158 and sclp.sief2 need to be available.

Let's add a function that checks for these requirements and prints a helpful skip message.

[...]

lib/s390x/uv.c bool uv_os_is_host(void) · line 54

Quoted 13 lines
lib/s390x/uv.c +13 -0
+bool uv_host_requirement_checks(void)
+{
+	if (!test_facility(158)) {
+		report_skip("UV Call facility unavailable");
+		return false;
+	}
+	if (!sclp_facilities.has_sief2) {
+		report_skip("SIEF2 facility unavailable");
+		return false;
+	}
+	if (get_ram_size() < SNIPPET_PV_MIN_MEM_SIZE) {
+		report_skip("Not enough memory. This test needs about %ld MB of memory",
+			    SNIPPET_PV_MIN_MEM_SIZE / 1024 / 1024);

I've just replaced the 1024 divisions with SZ_1M i nthe second series. Feel free to do that here when picking if I don't need to send a new version.

#8 lore raw

PATCH v5 6/8 s390x: pv: Add sie entry intercept and validity test

In reply to Janosch Frank

The lowcore is an important part of any s390 cpu so we need to make sure it's always available when we virtualize one. For non-PV guests that would mean ensuring that the lowcore page is read and writable by the guest.

For PV guests we additionally need to make sure that the page is owned by the guest as it is only allowed to access them if that's the case. The code 112 SIE intercept tells us if the lowcore pages aren't secure anymore.

Let's check if that intercept is reported by SIE if we export the lowcore pages. Additionally check if that's also the case if the guest shares the lowcore which will make it readable to the host but ownership of the page should not change.

Also we check for validities in these conditions:
* Manipulated cpu timer
* Double SIE for same vcpu
* Re-use of VCPU handle from another secure configuration
* ASCE re-use

---
 s390x/Makefile                          |   5 +
 s390x/pv-icptcode.c                     | 376 ++++++++++++++++++++++++
 s390x/snippets/asm/icpt-loop.S          |  15 +
 s390x/snippets/asm/loop.S               |  13 +
 s390x/snippets/asm/pv-icpt-112.S        |  81 +++++
 s390x/snippets/asm/pv-icpt-vir-timing.S |  21 ++
 s390x/unittests.cfg                     |   6 +
 7 files changed, 517 insertions(+)
 create mode 100644 s390x/pv-icptcode.c
 create mode 100644 s390x/snippets/asm/icpt-loop.S
 create mode 100644 s390x/snippets/asm/loop.S
 create mode 100644 s390x/snippets/asm/pv-icpt-112.S
 create mode 100644 s390x/snippets/asm/pv-icpt-vir-timing.S
s390x/Makefile +5 -0
index 8d1cfc7c..67be5360 100644
@@ -42,6 +42,7 @@ tests += $(TEST_DIR)/exittime.elf
 tests += $(TEST_DIR)/ex.elf
 
 pv-tests += $(TEST_DIR)/pv-diags.elf
+pv-tests += $(TEST_DIR)/pv-icptcode.elf
 
 ifneq ($(HOST_KEY_DOCUMENT),)
 ifneq ($(GEN_SE_HEADER),)
@@ -125,6 +126,10 @@ $(TEST_DIR)/spec_ex-sie.elf: snippets = $(SNIPPET_DIR)/c/spec_ex.gbin
 $(TEST_DIR)/pv-diags.elf: pv-snippets += $(SNIPPET_DIR)/asm/pv-diag-yield.gbin
 $(TEST_DIR)/pv-diags.elf: pv-snippets += $(SNIPPET_DIR)/asm/pv-diag-288.gbin
 $(TEST_DIR)/pv-diags.elf: pv-snippets += $(SNIPPET_DIR)/asm/pv-diag-500.gbin
+$(TEST_DIR)/pv-icptcode.elf: pv-snippets += $(SNIPPET_DIR)/asm/pv-icpt-112.gbin
+$(TEST_DIR)/pv-icptcode.elf: pv-snippets += $(SNIPPET_DIR)/asm/icpt-loop.gbin
+$(TEST_DIR)/pv-icptcode.elf: pv-snippets += $(SNIPPET_DIR)/asm/loop.gbin
+$(TEST_DIR)/pv-icptcode.elf: pv-snippets += $(SNIPPET_DIR)/asm/pv-icpt-vir-timing.gbin
 
 ifneq ($(GEN_SE_HEADER),)
 snippets += $(pv-snippets)
s390x/pv-icptcode.c new file +376 -0

376 lines not on this page · raw message

s390x/snippets/asm/icpt-loop.S new file +15 -0
new file mode 100644
index 00000000..2aa59c01
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Infinite loop snippet which can be used to test manipulated SIE
+ * control block intercepts. E.g. when manipulating the PV handles.
+ *
+ * Copyright (c) 2023 IBM Corp
+ *
+ * Authors:
+ *  Janosch Frank <[email protected]>
+ */
+.section .text
+xgr	%r0, %r0
+retry:
+diag	0,0,0x44
+j 	retry
s390x/snippets/asm/loop.S new file +13 -0
new file mode 100644
index 00000000..a75bf00d
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Infinite loop snippet with no exit
+ *
+ * Copyright (c) 2023 IBM Corp
+ *
+ * Authors:
+ *  Janosch Frank <[email protected]>
+ */
+.section .text
+
+retry:
+j 	retry
s390x/snippets/asm/pv-icpt-112.S new file +81 -0

81 lines not on this page · raw message

s390x/snippets/asm/pv-icpt-vir-timing.S new file +21 -0
new file mode 100644
index 00000000..939134a2
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Sets a cpu timer which the host can manipulate to check if it will
+ * receive a validity
+ *
+ * Copyright (c) 2023 IBM Corp
+ *
+ * Authors:
+ *  Janosch Frank <[email protected]>
+ */
+.section .text
+larl	%r1, time_val
+spt	0 (%r1)
+diag    0, 0, 0x44
+lghi	%r1, 42
+diag	1, 0, 0x9c
+
+
+.align 8
+time_val:
+	.quad 0x280de80000
s390x/unittests.cfg +6 -0
index b61faf07..df25b483 100644
@@ -218,3 +218,9 @@ extra_params = -append '--parallel'
 
 [execute]
 file = ex.elf
+
+[pv-icptcode]
+file = pv-icptcode.elf
+smp = 3
+groups = pv-host
+extra_params = -m 2200
Signature · 1 line
2.34.1
#9 lore raw

PATCH v5 7/8 s390x: pv: Add IPL reset tests

In reply to Janosch Frank

The diag308 requires extensive cooperation between the hypervisor and the Ultravisor so the Ultravisor can make sure all necessary reset steps have been done.

Let's check if we get the correct validity errors.

---
 s390x/Makefile                   |   2 +
 s390x/pv-ipl.c                   | 143 +++++++++++++++++++++++++++++++
 s390x/snippets/asm/pv-diag-308.S |  51 +++++++++++
 s390x/unittests.cfg              |   5 ++
 4 files changed, 201 insertions(+)
 create mode 100644 s390x/pv-ipl.c
 create mode 100644 s390x/snippets/asm/pv-diag-308.S
s390x/Makefile +2 -0
index 67be5360..b5b94810 100644
@@ -43,6 +43,7 @@ tests += $(TEST_DIR)/ex.elf
 
 pv-tests += $(TEST_DIR)/pv-diags.elf
 pv-tests += $(TEST_DIR)/pv-icptcode.elf
+pv-tests += $(TEST_DIR)/pv-ipl.elf
 
 ifneq ($(HOST_KEY_DOCUMENT),)
 ifneq ($(GEN_SE_HEADER),)
@@ -130,6 +131,7 @@ $(TEST_DIR)/pv-icptcode.elf: pv-snippets += $(SNIPPET_DIR)/asm/pv-icpt-112.gbin
 $(TEST_DIR)/pv-icptcode.elf: pv-snippets += $(SNIPPET_DIR)/asm/icpt-loop.gbin
 $(TEST_DIR)/pv-icptcode.elf: pv-snippets += $(SNIPPET_DIR)/asm/loop.gbin
 $(TEST_DIR)/pv-icptcode.elf: pv-snippets += $(SNIPPET_DIR)/asm/pv-icpt-vir-timing.gbin
+$(TEST_DIR)/pv-ipl.elf: pv-snippets += $(SNIPPET_DIR)/asm/pv-diag-308.gbin
 
 ifneq ($(GEN_SE_HEADER),)
 snippets += $(pv-snippets)
s390x/pv-ipl.c new file +143 -0

143 lines not on this page · raw message

s390x/snippets/asm/pv-diag-308.S new file +51 -0

51 lines not on this page · raw message

s390x/unittests.cfg +5 -0
index df25b483..26bab34a 100644
@@ -224,3 +224,8 @@ file = pv-icptcode.elf
 smp = 3
 groups = pv-host
 extra_params = -m 2200
+
+[pv-ipl]
+file = pv-ipl.elf
+groups = pv-host
+extra_params = -m 2200
Signature · 1 line
2.34.1
#10 lore raw

PATCH v5 8/8 s390x: pv-diags: Add the test to unittests.conf

In reply to Janosch Frank

Better to have it run into a skip than to not run it at all.

---
 s390x/unittests.cfg | 5 +++++
 1 file changed, 5 insertions(+)
s390x/unittests.cfg +5 -0
index 26bab34a..49b3cee4 100644
@@ -229,3 +229,8 @@ extra_params = -m 2200
 file = pv-ipl.elf
 groups = pv-host
 extra_params = -m 2200
+
+[pv-diags]
+file = pv-diags.elf
+groups = pv-host
+extra_params = -m 2200
Signature · 1 line
2.34.1