net: stmmac: dwmac-qcom-ethqos: add support for EMAC4
Subsystems (7)
v2 cover net: stmmac: dwmac-qcom-ethqos: add support for EMAC4
From: Bartosz Golaszewski <[email protected]>
Extend the dwmac-qcom-ethqos driver to support EMAC4. While at it: rework the code somewhat. The bindings have been reviewed by DT maintainers.
This is a sub-series of [1] with only the patches targetting the net subsystem as they can go in independently.
[1] https://lore.kernel.org/lkml/[email protected]/T/
Bartosz Golaszewski (14):
net: stmmac: dwmac-qcom-ethqos: shrink clock code with devres
net: stmmac: dwmac-qcom-ethqos: rename a label in probe()
net: stmmac: dwmac-qcom-ethqos: tweak the order of local variables
net: stmmac: dwmac-qcom-ethqos: use a helper variable for &pdev->dev
net: stmmac: dwmac-qcom-ethqos: add missing include
net: stmmac: dwmac-qcom-ethqos: add a newline between headers
net: stmmac: dwmac-qcom-ethqos: remove stray space
net: stmmac: dwmac-qcom-ethqos: add support for the optional serdes
phy
net: stmmac: dwmac-qcom-ethqos: add support for the phyaux clock
net: stmmac: dwmac-qcom-ethqos: prepare the driver for more PHY modes
net: stmmac: dwmac-qcom-ethqos: add support for SGMII
net: stmmac: add new switch to struct plat_stmmacenet_data
dt-bindings: net: qcom,ethqos: add description for sa8775p
net: stmmac: dwmac-qcom-ethqos: add support for emac4 on sa8775p
platforms
.../devicetree/bindings/net/qcom,ethqos.yaml | 12 +- .../devicetree/bindings/net/snps,dwmac.yaml | 3 + .../stmicro/stmmac/dwmac-qcom-ethqos.c | 284 +++++++++++++----- .../net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +- include/linux/stmmac.h | 1 + 5 files changed, 226 insertions(+), 76 deletions(-)
Signature · 1 line
2.39.2
PATCH RESEND v2 1/14 net: stmmac: dwmac-qcom-ethqos: shrink clock code with devres
From: Bartosz Golaszewski <[email protected]>
We can use a devm action to completely drop the remove callback and use stmmac_pltfr_remove() directly for remove. We can also drop one of the goto labels.
--- .../stmicro/stmmac/dwmac-qcom-ethqos.c | 24 +++++++++---------- 1 file changed, 11 insertions(+), 13 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +11 -13
@@ -586,6 +586,11 @@ static int ethqos_clks_config(void *priv, bool enabled)return ret; } +static void ethqos_clks_disable (void *data) +{ +ethqos_clks_config (data, false); +} +static int qcom_ethqos_probe (struct platform_device *pdev) {struct device_node *np = pdev->dev.of_node;
@@ -636,6 +641,10 @@ static int qcom_ethqos_probe(struct platform_device *pdev)if (ret) goto err_mem; + ret =devm_add_action_or_reset (&pdev->dev, ethqos_clks_disable, ethqos); +if (ret) + goto err_mem; + ethqos->speed =SPEED_1000 ;ethqos_update_rgmii_clk (ethqos,SPEED_1000 );ethqos_set_func_clk_en (ethqos);
@@ -653,27 +662,16 @@ static int qcom_ethqos_probe(struct platform_device *pdev) ret =stmmac_dvr_probe (&pdev->dev, plat_dat, &stmmac_res);if (ret) - goto err_clk; + goto err_mem;return ret; -err_clk: -ethqos_clks_config (ethqos, false); - err_mem:stmmac_remove_config_dt (pdev, plat_dat);return ret; } -static void qcom_ethqos_remove (struct platform_device *pdev) -{ -struct qcom_ethqos *ethqos =get_stmmac_bsp_priv (&pdev->dev); - -stmmac_pltfr_remove (pdev); -ethqos_clks_config (ethqos, false); -} -static const struct of_device_id qcom_ethqos_match[] = { { .compatible ="qcom,qcs404-ethqos" , .data = &emac_v2_3_0_data}, { .compatible ="qcom,sc8280xp-ethqos" , .data = &emac_v3_0_0_data},
@@ -684,7 +682,7 @@ MODULE_DEVICE_TABLE(of, qcom_ethqos_match);static struct platform_driver qcom_ethqos_driver = { .probe = qcom_ethqos_probe, - .remove_new = qcom_ethqos_remove, + .remove_new = stmmac_pltfr_remove, .driver = { .name ="qcom-ethqos" , .pm = &stmmac_pltfr_pm_ops,
Signature · 1 line
2.39.2
PATCH RESEND v2 2/14 net: stmmac: dwmac-qcom-ethqos: rename a label in probe()
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
The err_mem label's name is unclear. It actually should be reached on any error after stmmac_probe_config_dt() succeeds. Name it after the cleanup action that needs to be called before exiting.
--- .../ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +7 -7
@@ -615,14 +615,14 @@ static int qcom_ethqos_probe(struct platform_device *pdev) ethqos =devm_kzalloc (&pdev->dev,sizeof (*ethqos),GFP_KERNEL );if (!ethqos) { ret = -ENOMEM ; - goto err_mem; + goto out_config_dt; } ethqos->pdev = pdev; ethqos->rgmii_base =devm_platform_ioremap_resource_byname (pdev,"rgmii" );if (IS_ERR (ethqos->rgmii_base)) { ret =PTR_ERR (ethqos->rgmii_base); - goto err_mem; + goto out_config_dt; } data =of_device_get_match_data (&pdev->dev);
@@ -634,16 +634,16 @@ static int qcom_ethqos_probe(struct platform_device *pdev) ethqos->rgmii_clk =devm_clk_get (&pdev->dev,"rgmii" );if (IS_ERR (ethqos->rgmii_clk)) { ret =PTR_ERR (ethqos->rgmii_clk); - goto err_mem; + goto out_config_dt; } ret =ethqos_clks_config (ethqos, true);if (ret) - goto err_mem; + goto out_config_dt; ret =devm_add_action_or_reset (&pdev->dev, ethqos_clks_disable, ethqos);if (ret) - goto err_mem; + goto out_config_dt; ethqos->speed =SPEED_1000 ;ethqos_update_rgmii_clk (ethqos,SPEED_1000 );
@@ -662,11 +662,11 @@ static int qcom_ethqos_probe(struct platform_device *pdev) ret =stmmac_dvr_probe (&pdev->dev, plat_dat, &stmmac_res);if (ret) - goto err_mem; + goto out_config_dt;return ret; -err_mem: +out_config_dt:stmmac_remove_config_dt (pdev, plat_dat);return ret;
Signature · 1 line
2.39.2
PATCH RESEND v2 3/14 net: stmmac: dwmac-qcom-ethqos: tweak the order of local variables
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
Make sure we follow the reverse-xmas tree convention.
--- drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +1 -1
@@ -594,9 +594,9 @@ static void ethqos_clks_disable(void *data)static int qcom_ethqos_probe (struct platform_device *pdev) {struct device_node *np = pdev->dev.of_node; +const struct ethqos_emac_driver_data *data;struct plat_stmmacenet_data *plat_dat;struct stmmac_resources stmmac_res; -const struct ethqos_emac_driver_data *data;struct qcom_ethqos *ethqos;int ret;
Signature · 1 line
2.39.2
PATCH RESEND v2 4/14 net: stmmac: dwmac-qcom-ethqos: use a helper variable for &pdev->dev
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
Shrink code and avoid line breaks by using a helper variable for &pdev->dev.
--- .../stmicro/stmmac/dwmac-qcom-ethqos.c | 49 ++++++++++--------- 1 file changed, 26 insertions(+), 23 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +26 -23
@@ -123,25 +123,26 @@ static void rgmii_updatel(struct qcom_ethqos *ethqos,static void rgmii_dump (void *priv) {struct qcom_ethqos *ethqos = priv; +struct device *dev = ðqos->pdev->dev; -dev_dbg (ðqos->pdev->dev,"Rgmii register dump\n" ); -dev_dbg (ðqos->pdev->dev,"RGMII_IO_MACRO_CONFIG: %x\n" , +dev_dbg (dev,"Rgmii register dump\n" ); +dev_dbg (dev,"RGMII_IO_MACRO_CONFIG: %x\n" ,rgmii_readl (ethqos,RGMII_IO_MACRO_CONFIG )); -dev_dbg (ðqos->pdev->dev,"SDCC_HC_REG_DLL_CONFIG: %x\n" , +dev_dbg (dev,"SDCC_HC_REG_DLL_CONFIG: %x\n" ,rgmii_readl (ethqos,SDCC_HC_REG_DLL_CONFIG )); -dev_dbg (ðqos->pdev->dev,"SDCC_HC_REG_DDR_CONFIG: %x\n" , +dev_dbg (dev,"SDCC_HC_REG_DDR_CONFIG: %x\n" ,rgmii_readl (ethqos,SDCC_HC_REG_DDR_CONFIG )); -dev_dbg (ðqos->pdev->dev,"SDCC_HC_REG_DLL_CONFIG2: %x\n" , +dev_dbg (dev,"SDCC_HC_REG_DLL_CONFIG2: %x\n" ,rgmii_readl (ethqos,SDCC_HC_REG_DLL_CONFIG2 )); -dev_dbg (ðqos->pdev->dev,"SDC4_STATUS: %x\n" , +dev_dbg (dev,"SDC4_STATUS: %x\n" ,rgmii_readl (ethqos,SDC4_STATUS )); -dev_dbg (ðqos->pdev->dev,"SDCC_USR_CTL: %x\n" , +dev_dbg (dev,"SDCC_USR_CTL: %x\n" ,rgmii_readl (ethqos,SDCC_USR_CTL )); -dev_dbg (ðqos->pdev->dev,"RGMII_IO_MACRO_CONFIG2: %x\n" , +dev_dbg (dev,"RGMII_IO_MACRO_CONFIG2: %x\n" ,rgmii_readl (ethqos,RGMII_IO_MACRO_CONFIG2 )); -dev_dbg (ðqos->pdev->dev,"RGMII_IO_MACRO_DEBUG1: %x\n" , +dev_dbg (dev,"RGMII_IO_MACRO_DEBUG1: %x\n" ,rgmii_readl (ethqos,RGMII_IO_MACRO_DEBUG1 )); -dev_dbg (ðqos->pdev->dev,"EMAC_SYSTEM_LOW_POWER_DEBUG: %x\n" , +dev_dbg (dev,"EMAC_SYSTEM_LOW_POWER_DEBUG: %x\n" ,rgmii_readl (ethqos,EMAC_SYSTEM_LOW_POWER_DEBUG )); }
@@ -242,6 +243,7 @@ static const struct ethqos_emac_driver_data emac_v3_0_0_data = {static int ethqos_dll_configure (struct qcom_ethqos *ethqos) { +struct device *dev = ðqos->pdev->dev;unsigned int val;int retry =1000 ;
@@ -279,7 +281,7 @@ static int ethqos_dll_configure(struct qcom_ethqos *ethqos) retry--; }while (retry >0 );if (!retry) -dev_err (ðqos->pdev->dev,"Clear CK_OUT_EN timedout\n" ); +dev_err (dev,"Clear CK_OUT_EN timedout\n" );/* Set CK_OUT_EN */ rgmii_updatel(ethqos, SDCC_DLL_CONFIG_CK_OUT_EN,
@@ -296,7 +298,7 @@ static int ethqos_dll_configure(struct qcom_ethqos *ethqos) retry--; }while (retry >0 );if (!retry) -dev_err (ðqos->pdev->dev,"Set CK_OUT_EN timedout\n" ); +dev_err (dev,"Set CK_OUT_EN timedout\n" );/* Set DDR_CAL_EN */ rgmii_updatel(ethqos, SDCC_DLL_CONFIG2_DDR_CAL_EN,
@@ -322,12 +324,13 @@ static int ethqos_dll_configure(struct qcom_ethqos *ethqos)static int ethqos_rgmii_macro_init (struct qcom_ethqos *ethqos) { +struct device *dev = ðqos->pdev->dev;int phase_shift;int phy_mode;int loopback;/* Determine if the PHY adds a 2 ns TX delay or the MAC handles it */ - phy_mode =device_get_phy_mode (ðqos->pdev->dev); + phy_mode =device_get_phy_mode (dev);if (phy_mode ==PHY_INTERFACE_MODE_RGMII_ID || phy_mode ==PHY_INTERFACE_MODE_RGMII_TXID ) phase_shift =0 ;
@@ -468,8 +471,7 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos) loopback, RGMII_IO_MACRO_CONFIG);break ;default : -dev_err (ðqos->pdev->dev, -"Invalid speed %d\n" , ethqos->speed); +dev_err (dev,"Invalid speed %d\n" , ethqos->speed);return -EINVAL ; }
@@ -478,6 +480,7 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos)static int ethqos_configure (struct qcom_ethqos *ethqos) { +struct device *dev = ðqos->pdev->dev;volatile unsigned int dll_lock;unsigned int i, retry =1000 ;
@@ -540,8 +543,7 @@ static int ethqos_configure(struct qcom_ethqos *ethqos) retry--; }while (retry >0 );if (!retry) -dev_err (ðqos->pdev->dev, -"Timeout while waiting for DLL lock\n" ); +dev_err (dev,"Timeout while waiting for DLL lock\n" ); }if (ethqos->speed ==SPEED_1000 )
@@ -597,6 +599,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)const struct ethqos_emac_driver_data *data;struct plat_stmmacenet_data *plat_dat;struct stmmac_resources stmmac_res; +struct device *dev = &pdev->dev;struct qcom_ethqos *ethqos;int ret;
@@ -606,13 +609,13 @@ static int qcom_ethqos_probe(struct platform_device *pdev) plat_dat =stmmac_probe_config_dt (pdev, stmmac_res.mac);if (IS_ERR (plat_dat)) { -dev_err (&pdev->dev,"dt configuration failed\n" ); +dev_err (dev,"dt configuration failed\n" );return PTR_ERR (plat_dat); } plat_dat->clks_config = ethqos_clks_config; - ethqos =devm_kzalloc (&pdev->dev,sizeof (*ethqos),GFP_KERNEL ); + ethqos =devm_kzalloc (dev,sizeof (*ethqos),GFP_KERNEL );if (!ethqos) { ret = -ENOMEM ; goto out_config_dt;
@@ -625,13 +628,13 @@ static int qcom_ethqos_probe(struct platform_device *pdev) goto out_config_dt; } - data =of_device_get_match_data (&pdev->dev); + data =of_device_get_match_data (dev); ethqos->por = data->por; ethqos->num_por = data->num_por; ethqos->rgmii_config_loopback_en = data->rgmii_config_loopback_en; ethqos->has_emac3 = data->has_emac3; - ethqos->rgmii_clk =devm_clk_get (&pdev->dev,"rgmii" ); + ethqos->rgmii_clk =devm_clk_get (dev,"rgmii" );if (IS_ERR (ethqos->rgmii_clk)) { ret =PTR_ERR (ethqos->rgmii_clk); goto out_config_dt;
@@ -641,7 +644,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)if (ret) goto out_config_dt; - ret =devm_add_action_or_reset (&pdev->dev, ethqos_clks_disable, ethqos); + ret =devm_add_action_or_reset (dev, ethqos_clks_disable, ethqos);if (ret) goto out_config_dt;
@@ -660,7 +663,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)if (of_device_is_compatible (np,"qcom,qcs404-ethqos" )) plat_dat->rx_clk_runs_in_lpi =1 ; - ret =stmmac_dvr_probe (&pdev->dev, plat_dat, &stmmac_res); + ret =stmmac_dvr_probe (dev, plat_dat, &stmmac_res);if (ret) goto out_config_dt;
Signature · 1 line
2.39.2
PATCH RESEND v2 5/14 net: stmmac: dwmac-qcom-ethqos: add missing include
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
device_get_phy_mode() is declared in linux/property.h but this header is not included.
--- drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +1 -0
@@ -6,6 +6,7 @@#include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/phy.h> +#include <linux/property.h> #include "stmmac.h" #include "stmmac_platform.h"
Signature · 1 line
2.39.2
PATCH RESEND v2 6/14 net: stmmac: dwmac-qcom-ethqos: add a newline between headers
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
Typically we use a newline between global and local headers so add it here as well.
--- drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +1 -0
@@ -7,6 +7,7 @@#include <linux/platform_device.h> #include <linux/phy.h> #include <linux/property.h> +#include "stmmac.h" #include "stmmac_platform.h"
Signature · 1 line
2.39.2
PATCH RESEND v2 7/14 net: stmmac: dwmac-qcom-ethqos: remove stray space
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
There's an unnecessary space in the rgmii_updatel() function, remove it.
--- drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +1 -1
@@ -117,7 +117,7 @@ static void rgmii_updatel(struct qcom_ethqos *ethqos, {unsigned int temp; - temp =rgmii_readl (ethqos, offset); + temp =rgmii_readl (ethqos, offset); temp = (temp & ~(mask)) | val;rgmii_writel (ethqos, temp, offset); }
Signature · 1 line
2.39.2
PATCH RESEND v2 8/14 net: stmmac: dwmac-qcom-ethqos: add support for the optional serdes phy
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
On sa8775p platforms, there's a SGMII SerDes PHY between the MAC and external PHY that we need to enable and configure.
--- .../stmicro/stmmac/dwmac-qcom-ethqos.c | 37 +++++++++++++++++++ 1 file changed, 37 insertions(+)
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +37 -0
@@ -6,6 +6,7 @@#include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/phy.h> +#include <linux/phy/phy.h> #include <linux/property.h> #include "stmmac.h"
@@ -93,6 +94,7 @@ struct qcom_ethqos {unsigned int rgmii_clk_rate;struct clk *rgmii_clk; +struct phy *serdes_phy;unsigned int speed;const struct ethqos_emac_por *por;
@@ -565,6 +567,30 @@ static void ethqos_fix_mac_speed(void *priv, unsigned int speed)ethqos_configure (ethqos); } +static int qcom_ethqos_serdes_powerup (struct net_device *ndev,void *priv) +{ +struct qcom_ethqos *ethqos = priv; +int ret; + + ret =phy_init (ethqos->serdes_phy); +if (ret) +return ret; + + ret =phy_power_on (ethqos->serdes_phy); +if (ret) +return ret; + +return phy_set_speed (ethqos->serdes_phy, ethqos->speed); +} + +static void qcom_ethqos_serdes_powerdown (struct net_device *ndev,void *priv) +{ +struct qcom_ethqos *ethqos = priv; + +phy_power_off (ethqos->serdes_phy); +phy_exit (ethqos->serdes_phy); +} +static int ethqos_clks_config (void *priv,bool enabled) {struct qcom_ethqos *ethqos = priv;
@@ -650,6 +676,12 @@ static int qcom_ethqos_probe(struct platform_device *pdev)if (ret) goto out_config_dt; + ethqos->serdes_phy =devm_phy_optional_get (dev,"serdes" ); +if (IS_ERR (ethqos->serdes_phy)) { + ret =PTR_ERR (ethqos->serdes_phy); + goto out_config_dt; + } + ethqos->speed =SPEED_1000 ;ethqos_update_rgmii_clk (ethqos,SPEED_1000 );ethqos_set_func_clk_en (ethqos);
@@ -665,6 +697,11 @@ static int qcom_ethqos_probe(struct platform_device *pdev)if (of_device_is_compatible (np,"qcom,qcs404-ethqos" )) plat_dat->rx_clk_runs_in_lpi =1 ; +if (ethqos->serdes_phy) { + plat_dat->serdes_powerup = qcom_ethqos_serdes_powerup; + plat_dat->serdes_powerdown = qcom_ethqos_serdes_powerdown; + } + ret =stmmac_dvr_probe (dev, plat_dat, &stmmac_res);if (ret) goto out_config_dt;
Signature · 1 line
2.39.2
PATCH RESEND v2 9/14 net: stmmac: dwmac-qcom-ethqos: add support for the phyaux clock
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
On sa8775p, the EMAC revision is 4 and we use SGMII instead of RGMII. There's no "rgmii" clock but there's a fourth clock under a different
name: "phyaux". Add a new field to the chip data struct that specifies the link clock name. Default to "rgmii" for backward compatibility.
--- .../stmicro/stmmac/dwmac-qcom-ethqos.c | 31 ++++++++++--------- 1 file changed, 16 insertions(+), 15 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +16 -15
@@ -85,6 +85,7 @@ struct ethqos_emac_driver_data {unsigned int num_por;bool rgmii_config_loopback_en;bool has_emac3; +const char *link_clk_name;struct dwmac4_addrs dwmac4_addrs; };
@@ -92,8 +93,8 @@ struct qcom_ethqos {struct platform_device *pdev;void __iomem *rgmii_base; -unsigned int rgmii_clk_rate; -struct clk *rgmii_clk; +unsigned int link_clk_rate; +struct clk *link_clk;struct phy *serdes_phy;unsigned int speed;
@@ -156,23 +157,23 @@ static void rgmii_dump(void *priv)#define RGMII_ID_MODE_10_LOW_SVS_CLK_FREQ (5 * 1000 * 1000UL)static void -ethqos_update_rgmii_clk (struct qcom_ethqos *ethqos,unsigned int speed) +ethqos_update_link_clk (struct qcom_ethqos *ethqos,unsigned int speed) {switch (speed) {case SPEED_1000 : - ethqos->rgmii_clk_rate =RGMII_1000_NOM_CLK_FREQ ; + ethqos->link_clk_rate =RGMII_1000_NOM_CLK_FREQ ;break ;case SPEED_100 : - ethqos->rgmii_clk_rate =RGMII_ID_MODE_100_LOW_SVS_CLK_FREQ ; + ethqos->link_clk_rate =RGMII_ID_MODE_100_LOW_SVS_CLK_FREQ ;break ;case SPEED_10 : - ethqos->rgmii_clk_rate =RGMII_ID_MODE_10_LOW_SVS_CLK_FREQ ; + ethqos->link_clk_rate =RGMII_ID_MODE_10_LOW_SVS_CLK_FREQ ;break ; } -clk_set_rate (ethqos->rgmii_clk, ethqos->rgmii_clk_rate); +clk_set_rate (ethqos->link_clk, ethqos->link_clk_rate); }static void ethqos_set_func_clk_en (struct qcom_ethqos *ethqos)
@@ -563,7 +564,7 @@ static void ethqos_fix_mac_speed(void *priv, unsigned int speed)struct qcom_ethqos *ethqos = priv; ethqos->speed = speed; -ethqos_update_rgmii_clk (ethqos, speed); +ethqos_update_link_clk (ethqos, speed);ethqos_configure (ethqos); }
@@ -597,9 +598,9 @@ static int ethqos_clks_config(void *priv, bool enabled)int ret =0 ;if (enabled) { - ret =clk_prepare_enable (ethqos->rgmii_clk); + ret =clk_prepare_enable (ethqos->link_clk);if (ret) { -dev_err (ðqos->pdev->dev,"rgmii_clk enable failed\n" ); +dev_err (ðqos->pdev->dev,"link_clk enable failed\n" );return ret; }
@@ -610,7 +611,7 @@ static int ethqos_clks_config(void *priv, bool enabled)*/ ethqos_set_func_clk_en (ethqos); }else { -clk_disable_unprepare (ethqos->rgmii_clk); +clk_disable_unprepare (ethqos->link_clk); }return ret;
@@ -662,9 +663,9 @@ static int qcom_ethqos_probe(struct platform_device *pdev) ethqos->rgmii_config_loopback_en = data->rgmii_config_loopback_en; ethqos->has_emac3 = data->has_emac3; - ethqos->rgmii_clk =devm_clk_get (dev,"rgmii" ); -if (IS_ERR (ethqos->rgmii_clk)) { - ret =PTR_ERR (ethqos->rgmii_clk); + ethqos->link_clk =devm_clk_get (dev, data->link_clk_name ?:"rgmii" ); +if (IS_ERR (ethqos->link_clk)) { + ret =PTR_ERR (ethqos->link_clk); goto out_config_dt; }
@@ -683,7 +684,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev) } ethqos->speed =SPEED_1000 ; -ethqos_update_rgmii_clk (ethqos,SPEED_1000 ); +ethqos_update_link_clk (ethqos,SPEED_1000 );ethqos_set_func_clk_en (ethqos); plat_dat->bsp_priv = ethqos;
Signature · 1 line
2.39.2
PATCH RESEND v2 10/14 net: stmmac: dwmac-qcom-ethqos: prepare the driver for more PHY modes
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
In preparation for supporting SGMII, let's make the code a bit more generic. Add a new callback for MAC configuration so that we can assign a different variant of it in the future.
--- .../stmicro/stmmac/dwmac-qcom-ethqos.c | 31 ++++++++++++++++--- 1 file changed, 26 insertions(+), 5 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +26 -5
@@ -92,11 +92,13 @@ struct ethqos_emac_driver_data {struct qcom_ethqos {struct platform_device *pdev;void __iomem *rgmii_base; +int (*configure_func)(struct qcom_ethqos *ethqos);unsigned int link_clk_rate;struct clk *link_clk;struct phy *serdes_phy;unsigned int speed; +int phy_mode;const struct ethqos_emac_por *por;unsigned int num_por;
@@ -331,13 +333,11 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos) {struct device *dev = ðqos->pdev->dev;int phase_shift; -int phy_mode;int loopback;/* Determine if the PHY adds a 2 ns TX delay or the MAC handles it */ - phy_mode =device_get_phy_mode (dev); -if (phy_mode ==PHY_INTERFACE_MODE_RGMII_ID || - phy_mode ==PHY_INTERFACE_MODE_RGMII_TXID ) +if (ethqos->phy_mode ==PHY_INTERFACE_MODE_RGMII_ID || + ethqos->phy_mode ==PHY_INTERFACE_MODE_RGMII_TXID ) phase_shift =0 ;else phase_shift =RGMII_CONFIG2_TX_CLK_PHASE_SHIFT_EN ;
@@ -483,7 +483,7 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos)return 0 ; } -static int ethqos_configure (struct qcom_ethqos *ethqos) +static int ethqos_configure_rgmii (struct qcom_ethqos *ethqos) {struct device *dev = ðqos->pdev->dev;volatile unsigned int dll_lock;
@@ -559,6 +559,11 @@ static int ethqos_configure(struct qcom_ethqos *ethqos)return 0 ; } +static int ethqos_configure (struct qcom_ethqos *ethqos) +{ +return ethqos->configure_func (ethqos); +} +static void ethqos_fix_mac_speed (void *priv,unsigned int speed) {struct qcom_ethqos *ethqos = priv;
@@ -650,6 +655,22 @@ static int qcom_ethqos_probe(struct platform_device *pdev) goto out_config_dt; } + ethqos->phy_mode =device_get_phy_mode (dev); +switch (ethqos->phy_mode) { +case PHY_INTERFACE_MODE_RGMII : +case PHY_INTERFACE_MODE_RGMII_ID : +case PHY_INTERFACE_MODE_RGMII_RXID : +case PHY_INTERFACE_MODE_RGMII_TXID : + ethqos->configure_func = ethqos_configure_rgmii; +break ; +case -ENODEV : + ret = -ENODEV ; + goto out_config_dt; +default : + ret = -EINVAL ; + goto out_config_dt; + } + ethqos->pdev = pdev; ethqos->rgmii_base =devm_platform_ioremap_resource_byname (pdev,"rgmii" );if (IS_ERR (ethqos->rgmii_base)) {
Signature · 1 line
2.39.2
PATCH RESEND v2 11/14 net: stmmac: dwmac-qcom-ethqos: add support for SGMII
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
On sa8775p the MAC is connected to the external PHY over SGMII so add support for it to the driver.
--- .../stmicro/stmmac/dwmac-qcom-ethqos.c | 37 +++++++++++++++++++ 1 file changed, 37 insertions(+)
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +37 -0
@@ -75,6 +75,10 @@#define RGMII_CONFIG2_DATA_DIVIDE_CLK_SEL BIT(6)#define RGMII_CONFIG2_TX_CLK_PHASE_SHIFT_EN BIT(5) +/* MAC_CTRL_REG bits */ +#define ETHQOS_MAC_CTRL_SPEED_MODE BIT(14) +#define ETHQOS_MAC_CTRL_PORT_SEL BIT(15) +struct ethqos_emac_por {unsigned int offset;unsigned int value;
@@ -92,6 +96,7 @@ struct ethqos_emac_driver_data {struct qcom_ethqos {struct platform_device *pdev;void __iomem *rgmii_base; +void __iomem *mac_base;int (*configure_func)(struct qcom_ethqos *ethqos);unsigned int link_clk_rate;
@@ -559,6 +564,33 @@ static int ethqos_configure_rgmii(struct qcom_ethqos *ethqos)return 0 ; } +static int ethqos_configure_sgmii (struct qcom_ethqos *ethqos) +{ +int val; + + val =readl (ethqos->mac_base +MAC_CTRL_REG ); + +switch (ethqos->speed) { +case SPEED_1000 : + val &= ~ETHQOS_MAC_CTRL_PORT_SEL ; +rgmii_updatel (ethqos,RGMII_CONFIG2_RGMII_CLK_SEL_CFG , +RGMII_CONFIG2_RGMII_CLK_SEL_CFG , +RGMII_IO_MACRO_CONFIG2 ); +break ; +case SPEED_100 : + val |=ETHQOS_MAC_CTRL_PORT_SEL |ETHQOS_MAC_CTRL_SPEED_MODE ; +break ; +case SPEED_10 : + val |=ETHQOS_MAC_CTRL_PORT_SEL ; + val &= ~ETHQOS_MAC_CTRL_SPEED_MODE ; +break ; + } + +writel (val, ethqos->mac_base +MAC_CTRL_REG ); + +return val; +} +static int ethqos_configure (struct qcom_ethqos *ethqos) {return ethqos->configure_func (ethqos);
@@ -663,6 +695,9 @@ static int qcom_ethqos_probe(struct platform_device *pdev)case PHY_INTERFACE_MODE_RGMII_TXID : ethqos->configure_func = ethqos_configure_rgmii;break ; +case PHY_INTERFACE_MODE_SGMII : + ethqos->configure_func = ethqos_configure_sgmii; +break ;case -ENODEV : ret = -ENODEV ; goto out_config_dt;
@@ -678,6 +713,8 @@ static int qcom_ethqos_probe(struct platform_device *pdev) goto out_config_dt; } + ethqos->mac_base = stmmac_res.addr; + data =of_device_get_match_data (dev); ethqos->por = data->por; ethqos->num_por = data->num_por;
Signature · 1 line
2.39.2
PATCH RESEND v2 12/14 net: stmmac: add new switch to struct plat_stmmacenet_data
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
On some platforms, the PCS can be integrated in the MAC so the driver will not see any PCS link activity. Add a switch that allows the platform drivers to let the core code know.
--- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +- include/linux/stmmac.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-)
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +1 -1
@@ -5798,7 +5798,7 @@ static void stmmac_common_interrupt(struct stmmac_priv *priv) }/* PCS link status */ -if (priv->hw->pcs) { +if (priv->hw->pcs && !priv->plat->has_integrated_pcs) {if (priv->xstats.pcs_link)netif_carrier_on (priv->dev);else
include/linux/stmmac.h +1 -0
@@ -293,5 +293,6 @@ struct plat_stmmacenet_data {bool sph_disable;bool serdes_up_after_phy_linkup;const struct dwmac4_addrs *dwmac4_addrs; + bool has_integrated_pcs; };#endif
Signature · 1 line
2.39.2
PATCH RESEND v2 13/14 dt-bindings: net: qcom,ethqos: add description for sa8775p
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
Add the compatible for the MAC controller on sa8775p platforms. This MAC works with a single interrupt so add minItems to the interrupts property. The fourth clock's name is different here so change it. Enable relevant PHY properties. Add the relevant compatibles to the binding document for snps,dwmac as well.
--- .../devicetree/bindings/net/qcom,ethqos.yaml | 12 +++++++++++- .../devicetree/bindings/net/snps,dwmac.yaml | 3 +++ 2 files changed, 14 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/net/qcom,ethqos.yaml +11 -1
@@ -20,6 +20,7 @@ properties: compatible: enum: - qcom,qcs404-ethqos + - qcom,sa8775p-ethqos - qcom,sc8280xp-ethqos - qcom,sm8150-ethqos
@@ -32,11 +33,13 @@ properties: - const: rgmii interrupts: + minItems: 1 items: - description: Combined signal for various interrupt events - description: The interrupt that occurs when Rx exits the LPI state interrupt-names: + minItems: 1 items: - const: macirq - const: eth_lpi
@@ -49,11 +52,18 @@ properties: - const: stmmaceth - const: pclk - const: ptp_ref - - const: rgmii + - enum: + - rgmii + - phyaux iommus: maxItems: 1 + phys: true + + phy-names: + const: serdes + required: - compatible - clocks
Documentation/devicetree/bindings/net/snps,dwmac.yaml +3 -0
@@ -67,6 +67,7 @@ properties: - loongson,ls2k-dwmac - loongson,ls7a-dwmac - qcom,qcs404-ethqos + - qcom,sa8775p-ethqos - qcom,sc8280xp-ethqos - qcom,sm8150-ethqos - renesas,r9a06g032-gmac
@@ -582,6 +583,7 @@ allOf: - ingenic,x1600-mac - ingenic,x1830-mac - ingenic,x2000-mac + - qcom,sa8775p-ethqos - qcom,sc8280xp-ethqos - snps,dwmac-3.50a - snps,dwmac-4.10a
@@ -638,6 +640,7 @@ allOf: - ingenic,x1830-mac - ingenic,x2000-mac - qcom,qcs404-ethqos + - qcom,sa8775p-ethqos - qcom,sc8280xp-ethqos - qcom,sm8150-ethqos - snps,dwmac-4.00
Signature · 1 line
2.39.2
PATCH RESEND v2 14/14 net: stmmac: dwmac-qcom-ethqos: add support for emac4 on sa8775p platforms
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
sa8775p uses EMAC version 4, add the relevant defines, rename the has_emac3 switch to has_emac_ge_3 (has emac greater-or-equal than 3) and add the new compatible.
--- .../stmicro/stmmac/dwmac-qcom-ethqos.c | 65 +++++++++++++++---- 1 file changed, 51 insertions(+), 14 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +51 -14
@@ -88,8 +88,9 @@ struct ethqos_emac_driver_data {const struct ethqos_emac_por *por;unsigned int num_por;bool rgmii_config_loopback_en; -bool has_emac3; +bool has_emac_ge_3;const char *link_clk_name; +bool has_integrated_pcs;struct dwmac4_addrs dwmac4_addrs; };
@@ -108,7 +109,7 @@ struct qcom_ethqos {const struct ethqos_emac_por *por;unsigned int num_por;bool rgmii_config_loopback_en; -bool has_emac3; +bool has_emac_ge_3; };static int rgmii_readl (struct qcom_ethqos *ethqos,unsigned int offset)
@@ -202,7 +203,7 @@ static const struct ethqos_emac_driver_data emac_v2_3_0_data = { .por = emac_v2_3_0_por, .num_por = ARRAY_SIZE(emac_v2_3_0_por), .rgmii_config_loopback_en = true, - .has_emac3 = false, + .has_emac_ge_3 = false, };static const struct ethqos_emac_por emac_v2_1_0_por[] = {
@@ -218,7 +219,7 @@ static const struct ethqos_emac_driver_data emac_v2_1_0_data = { .por = emac_v2_1_0_por, .num_por = ARRAY_SIZE(emac_v2_1_0_por), .rgmii_config_loopback_en = false, - .has_emac3 = false, + .has_emac_ge_3 = false, };static const struct ethqos_emac_por emac_v3_0_0_por[] = {
@@ -234,7 +235,41 @@ static const struct ethqos_emac_driver_data emac_v3_0_0_data = { .por = emac_v3_0_0_por, .num_por = ARRAY_SIZE(emac_v3_0_0_por), .rgmii_config_loopback_en = false, - .has_emac3 = true, + .has_emac_ge_3 = true, + .dwmac4_addrs = { + .dma_chan = 0x00008100, + .dma_chan_offset = 0x1000, + .mtl_chan = 0x00008000, + .mtl_chan_offset = 0x1000, + .mtl_ets_ctrl = 0x00008010, + .mtl_ets_ctrl_offset = 0x1000, + .mtl_txq_weight = 0x00008018, + .mtl_txq_weight_offset = 0x1000, + .mtl_send_slp_cred = 0x0000801c, + .mtl_send_slp_cred_offset = 0x1000, + .mtl_high_cred = 0x00008020, + .mtl_high_cred_offset = 0x1000, + .mtl_low_cred = 0x00008024, + .mtl_low_cred_offset = 0x1000, + }, +}; + +static const struct ethqos_emac_por emac_v4_0_0_por[] = { + { .offset =RGMII_IO_MACRO_CONFIG , .value =0x40c01343 }, + { .offset =SDCC_HC_REG_DLL_CONFIG , .value =0x2004642c }, + { .offset =SDCC_HC_REG_DDR_CONFIG , .value =0x80040800 }, + { .offset =SDCC_HC_REG_DLL_CONFIG2 , .value =0x00200000 }, + { .offset =SDCC_USR_CTL , .value =0x00010800 }, + { .offset =RGMII_IO_MACRO_CONFIG2 , .value =0x00002060 }, +}; + +static const struct ethqos_emac_driver_data emac_v4_0_0_data = { + .por = emac_v4_0_0_por, + .num_por =ARRAY_SIZE (emac_v3_0_0_por), + .rgmii_config_loopback_en = false, + .has_emac_ge_3 = true, + .link_clk_name ="phyaux" , + .has_integrated_pcs = true, .dwmac4_addrs = { .dma_chan =0x00008100 , .dma_chan_offset =0x1000 ,
@@ -275,7 +310,7 @@ static int ethqos_dll_configure(struct qcom_ethqos *ethqos)rgmii_updatel (ethqos,SDCC_DLL_CONFIG_DLL_EN ,SDCC_DLL_CONFIG_DLL_EN ,SDCC_HC_REG_DLL_CONFIG ); -if (!ethqos->has_emac3) { +if (!ethqos->has_emac_ge_3) {rgmii_updatel (ethqos,SDCC_DLL_MCLK_GATING_EN ,0 ,SDCC_HC_REG_DLL_CONFIG );
@@ -316,7 +351,7 @@ static int ethqos_dll_configure(struct qcom_ethqos *ethqos)rgmii_updatel (ethqos,SDCC_DLL_CONFIG2_DDR_CAL_EN ,SDCC_DLL_CONFIG2_DDR_CAL_EN ,SDCC_HC_REG_DLL_CONFIG2 ); -if (!ethqos->has_emac3) { +if (!ethqos->has_emac_ge_3) {rgmii_updatel (ethqos,SDCC_DLL_CONFIG2_DLL_CLOCK_DIS ,0 ,SDCC_HC_REG_DLL_CONFIG2 );
@@ -386,7 +421,7 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos)/* PRG_RCLK_DLY = TCXO period * TCXO_CYCLES_CNT / 2 * RX delay ns, * in practice this becomes PRG_RCLK_DLY = 52 * 4 / 2 * RX delay ns */ -if (ethqos->has_emac3) { +if (ethqos->has_emac_ge_3) {/* 0.9 ns */ rgmii_updatel (ethqos,SDCC_DDR_CONFIG_PRG_RCLK_DLY ,115 ,SDCC_HC_REG_DDR_CONFIG );
@@ -421,7 +456,7 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos)rgmii_updatel (ethqos,RGMII_CONFIG2_RSVD_CONFIG15 ,0 ,RGMII_IO_MACRO_CONFIG2 ); -if (ethqos->has_emac3) +if (ethqos->has_emac_ge_3)rgmii_updatel (ethqos,RGMII_CONFIG2_RX_PROG_SWAP ,RGMII_CONFIG2_RX_PROG_SWAP ,RGMII_IO_MACRO_CONFIG2 );
@@ -461,7 +496,7 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos) RGMII_IO_MACRO_CONFIG);rgmii_updatel (ethqos,RGMII_CONFIG2_RSVD_CONFIG15 ,0 ,RGMII_IO_MACRO_CONFIG2 ); -if (ethqos->has_emac3) +if (ethqos->has_emac_ge_3)rgmii_updatel (ethqos,RGMII_CONFIG2_RX_PROG_SWAP ,RGMII_CONFIG2_RX_PROG_SWAP ,RGMII_IO_MACRO_CONFIG2 );
@@ -510,7 +545,7 @@ static int ethqos_configure_rgmii(struct qcom_ethqos *ethqos)rgmii_updatel (ethqos,SDCC_DLL_CONFIG_PDN ,SDCC_DLL_CONFIG_PDN ,SDCC_HC_REG_DLL_CONFIG ); -if (ethqos->has_emac3) { +if (ethqos->has_emac_ge_3) {if (ethqos->speed ==SPEED_1000 ) {rgmii_writel (ethqos,0x1800000 ,SDCC_TEST_CTL );rgmii_writel (ethqos,0x2C010800 ,SDCC_USR_CTL );
@@ -540,7 +575,7 @@ static int ethqos_configure_rgmii(struct qcom_ethqos *ethqos) SDCC_HC_REG_DLL_CONFIG);/* Set USR_CTL bit 26 with mask of 3 bits */ -if (!ethqos->has_emac3) +if (!ethqos->has_emac_ge_3)rgmii_updatel (ethqos,GENMASK (26 ,24 ),BIT (26 ),SDCC_USR_CTL );
@@ -719,7 +754,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev) ethqos->por = data->por; ethqos->num_por = data->num_por; ethqos->rgmii_config_loopback_en = data->rgmii_config_loopback_en; - ethqos->has_emac3 = data->has_emac3; + ethqos->has_emac_ge_3 = data->has_emac_ge_3; ethqos->link_clk =devm_clk_get (dev, data->link_clk_name ?:"rgmii" );if (IS_ERR (ethqos->link_clk)) {
@@ -749,12 +784,13 @@ static int qcom_ethqos_probe(struct platform_device *pdev) plat_dat->fix_mac_speed = ethqos_fix_mac_speed; plat_dat->dump_debug_regs = rgmii_dump; plat_dat->has_gmac4 =1 ; -if (ethqos->has_emac3) +if (ethqos->has_emac_ge_3) plat_dat->dwmac4_addrs = &data->dwmac4_addrs; plat_dat->pmt =1 ; plat_dat->tso_en =of_property_read_bool (np,"snps,tso" );if (of_device_is_compatible (np,"qcom,qcs404-ethqos" )) plat_dat->rx_clk_runs_in_lpi =1 ; + plat_dat->has_integrated_pcs = data->has_integrated_pcs;if (ethqos->serdes_phy) { plat_dat->serdes_powerup = qcom_ethqos_serdes_powerup;
@@ -775,6 +811,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)static const struct of_device_id qcom_ethqos_match[] = { { .compatible ="qcom,qcs404-ethqos" , .data = &emac_v2_3_0_data}, + { .compatible ="qcom,sa8775p-ethqos" , .data = &emac_v4_0_0_data}, { .compatible ="qcom,sc8280xp-ethqos" , .data = &emac_v3_0_0_data}, { .compatible ="qcom,sm8150-ethqos" , .data = &emac_v2_1_0_data}, { }
Signature · 1 line
2.39.2
This series was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:
Hello:
This series was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:
Quoted 9 lines · On Mon, 19 Jun 2023 11:23:48 +0200 you wrote:
From: Bartosz Golaszewski <[email protected]>
Extend the dwmac-qcom-ethqos driver to support EMAC4. While at it: rework the code somewhat. The bindings have been reviewed by DT maintainers.
This is a sub-series of [1] with only the patches targetting the net subsystem as they can go in independently.
[...]
Here is the summary with links:
- [RESEND,v2,01/14] net: stmmac: dwmac-qcom-ethqos: shrink clock code with devres
https://git.kernel.org/netdev/net-next/c/9fc68f23a6d3 - [RESEND,v2,02/14] net: stmmac: dwmac-qcom-ethqos: rename a label in probe() https://git.kernel.org/netdev/net-next/c/9bc580609139 - [RESEND,v2,03/14] net: stmmac: dwmac-qcom-ethqos: tweak the order of local variables https://git.kernel.org/netdev/net-next/c/7b5e64a93825 - [RESEND,v2,04/14] net: stmmac: dwmac-qcom-ethqos: use a helper variable for &pdev->dev https://git.kernel.org/netdev/net-next/c/302555a0ae33 - [RESEND,v2,05/14] net: stmmac: dwmac-qcom-ethqos: add missing include https://git.kernel.org/netdev/net-next/c/ee8dacca2fd3 - [RESEND,v2,06/14] net: stmmac: dwmac-qcom-ethqos: add a newline between headers https://git.kernel.org/netdev/net-next/c/97f73bc59e16 - [RESEND,v2,07/14] net: stmmac: dwmac-qcom-ethqos: remove stray space https://git.kernel.org/netdev/net-next/c/f2b1758554eb - [RESEND,v2,08/14] net: stmmac: dwmac-qcom-ethqos: add support for the optional serdes phy https://git.kernel.org/netdev/net-next/c/0dec3b48aa4e - [RESEND,v2,09/14] net: stmmac: dwmac-qcom-ethqos: add support for the phyaux clock https://git.kernel.org/netdev/net-next/c/feeb27165c46 - [RESEND,v2,10/14] net: stmmac: dwmac-qcom-ethqos: prepare the driver for more PHY modes https://git.kernel.org/netdev/net-next/c/25c4a0769443 - [RESEND,v2,11/14] net: stmmac: dwmac-qcom-ethqos: add support for SGMII https://git.kernel.org/netdev/net-next/c/463120c31c58 - [RESEND,v2,12/14] net: stmmac: add new switch to struct plat_stmmacenet_data https://git.kernel.org/netdev/net-next/c/aa571b6275fb - [RESEND,v2,13/14] dt-bindings: net: qcom,ethqos: add description for sa8775p https://git.kernel.org/netdev/net-next/c/d0e3d29f8771 - [RESEND,v2,14/14] net: stmmac: dwmac-qcom-ethqos: add support for emac4 on sa8775p platforms https://git.kernel.org/netdev/net-next/c/8c4d92e82d50
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html