staging: rtl8192e: some simple cleanups
cover staging: rtl8192e: some simple cleanups
Four patches with simple coding style cleanups.
Michael Straube (4):
staging: rtl8192e: clean up brace coding style issues
staging: rtl8192e: convert else if sequence to switch
staging: rtl8192e: remove return statement from void function
staging: rtl8192e: remove comparison to true
.../staging/rtl8192e/rtl8192e/r8192E_dev.c | 3 +- .../staging/rtl8192e/rtl8192e/r8192E_phy.c | 11 +++--- drivers/staging/rtl8192e/rtl8192e/rtl_dm.c | 3 +- drivers/staging/rtl8192e/rtl8192e/rtl_ps.c | 3 +- drivers/staging/rtl8192e/rtl8192e/rtl_wx.c | 6 +-- drivers/staging/rtl8192e/rtllib_softmac.c | 39 +++++++++++-------- drivers/staging/rtl8192e/rtllib_softmac_wx.c | 4 +- 7 files changed, 40 insertions(+), 29 deletions(-)
Signature · 1 line
2.41.0
PATCH 1/4 staging: rtl8192e: clean up brace coding style issues
Clean up brace coding style in if/else statements to improve readability and clear checkpatch issues.
CHECK: braces {} should be used on all arms of this statement
CHECK: Unbalanced braces around else statement
--- .../staging/rtl8192e/rtl8192e/r8192E_dev.c | 3 ++- .../staging/rtl8192e/rtl8192e/r8192E_phy.c | 10 +++++--- drivers/staging/rtl8192e/rtl8192e/rtl_dm.c | 3 ++- drivers/staging/rtl8192e/rtl8192e/rtl_ps.c | 3 ++- drivers/staging/rtl8192e/rtl8192e/rtl_wx.c | 4 +-- drivers/staging/rtl8192e/rtllib_softmac.c | 25 +++++++++++-------- drivers/staging/rtl8192e/rtllib_softmac_wx.c | 4 +-- 7 files changed, 30 insertions(+), 22 deletions(-)
drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c +2 -1
@@ -765,8 +765,9 @@ void rtl92e_link_change(struct net_device *dev) ; else priv->receive_config = reg |= RCR_CBSSID; - }else + }else { priv->receive_config = reg &= ~RCR_CBSSID ; + }rtl92e_writel (dev,RCR , reg); }
drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c +6 -4
@@ -39,8 +39,9 @@ void rtl92e_set_bb_reg(struct net_device *dev, u32 dwRegAddr, u32 dwBitMask, BitShift =_rtl92e_calculate_bit_shift (dwBitMask); NewValue = (OriginalValue & ~dwBitMask) | (dwData << BitShift);rtl92e_writel (dev, dwRegAddr, NewValue); - }else + }else {rtl92e_writel (dev, dwRegAddr, dwData); + } }u32 rtl92e_get_bb_reg (struct net_device *dev,u32 dwRegAddr,u32 dwBitMask)
@@ -163,10 +164,10 @@ void rtl92e_set_rf_reg(struct net_device *dev, enum rf90_radio_path eRFPath,_rtl92e_phy_rf_fw_write (dev, eRFPath, RegAddr, New_Value); - }else + }else {_rtl92e_phy_rf_fw_write (dev, eRFPath, RegAddr, Data); + }udelay (200 ); - }else {if (BitMask != bMask12Bits) { Original_Value = _rtl92e_phy_rf_read(dev, eRFPath,
@@ -175,8 +176,9 @@ void rtl92e_set_rf_reg(struct net_device *dev, enum rf90_radio_path eRFPath, New_Value = (Original_Value & ~BitMask) | (Data << BitShift);_rtl92e_phy_rf_write (dev, eRFPath, RegAddr, New_Value); - }else + }else {_rtl92e_phy_rf_write (dev, eRFPath, RegAddr, Data); + } } }
drivers/staging/rtl8192e/rtl8192e/rtl_dm.c +2 -1
@@ -622,8 +622,9 @@ static void _rtl92e_dm_tx_power_tracking_callback_tssi(struct net_device *dev) }else if (priv->rtllib->current_network.channel !=14 && priv->bcck_in_ch14) { priv->bcck_in_ch14 = false;rtl92e_dm_cck_txpower_adjust (dev, priv->bcck_in_ch14); - }else + }else {rtl92e_dm_cck_txpower_adjust (dev, priv->bcck_in_ch14); + } } if (priv->cck_present_attn_diff <= -12 ||
drivers/staging/rtl8192e/rtl8192e/rtl_ps.c +2 -1
@@ -219,8 +219,9 @@ void rtl92e_leisure_ps_enter(struct net_device *dev)if (priv->rtllib->ps ==RTLLIB_PS_DISABLED )_rtl92e_ps_set_mode (dev,RTLLIB_PS_MBCAST |RTLLIB_PS_UNICAST ); - }else + }else { psc->LpsIdleCount++; + } } }
drivers/staging/rtl8192e/rtl8192e/rtl_wx.c +2 -2
@@ -568,9 +568,9 @@ static int _rtl92e_wx_set_frag(struct net_device *dev,if (priv->hw_radio_off)return 0 ; -if (wrqu->frag.disabled) +if (wrqu->frag.disabled) { priv->rtllib->fts =DEFAULT_FRAG_THRESHOLD ; -else { + }else {if (wrqu->frag.value <MIN_FRAG_THRESHOLD || wrqu->frag.value >MAX_FRAG_THRESHOLD )return -EINVAL ;
drivers/staging/rtl8192e/rtllib_softmac.c +14 -11
@@ -809,8 +809,9 @@ static struct sk_buff *rtllib_probe_resp(struct rtllib_device *ieee, erpinfo_content =0 ;if (ieee->current_network.buseprotection) erpinfo_content |= ERP_UseProtection; - }else + }else { erp_len =0 ; + } crypt = ieee->crypt_info.crypt[ieee->crypt_info.tx_keyidx]; encrypt = ieee->host_encrypt && crypt && crypt->ops &&
@@ -1383,9 +1384,9 @@ static void rtllib_associate_step1(struct rtllib_device *ieee, u8 *daddr) skb =rtllib_authentication_req (beacon, ieee,0 , daddr); -if (!skb) +if (!skb) {rtllib_associate_abort (ieee); -else { + }else { ieee->link_state =RTLLIB_ASSOCIATING_AUTHENTICATING ;netdev_dbg (ieee->dev,"Sending authentication request\n" );softmac_mgmt_xmit (skb, ieee);
@@ -1408,9 +1409,9 @@ static void rtllib_auth_challenge(struct rtllib_device *ieee, u8 *challenge, skb =rtllib_authentication_req (beacon, ieee, chlen +2 , beacon->bssid); -if (!skb) +if (!skb) {rtllib_associate_abort (ieee); -else { + }else { c =skb_put (skb, chlen +2 ); *(c++) =MFIE_TYPE_CHALLENGE ; *(c++) = chlen;
@@ -1439,9 +1440,9 @@ static void rtllib_associate_step2(struct rtllib_device *ieee) ieee->softmac_stats.tx_ass_rq++; skb =rtllib_association_req (beacon, ieee); -if (!skb) +if (!skb) {rtllib_associate_abort (ieee); -else { + }else {softmac_mgmt_xmit (skb, ieee);mod_timer (&ieee->associate_timer, jiffies + (HZ /2 )); }
@@ -1583,11 +1584,12 @@ inline void rtllib_softmac_new_net(struct rtllib_device *ieee, net->ssid_len = net->hidden_ssid_len; ssidbroad =1 ; } - }else + }else { ssidmatch = (ieee->current_network.ssid_len == net->ssid_len) && (!strncmp (ieee->current_network.ssid, net->ssid, net->ssid_len)); + }/* if the user set the AP check if match. * if the network does not broadcast essid we check the
@@ -2536,8 +2538,9 @@ static void rtllib_start_ibss_wq(void *data) ieee->current_network.rates[3 ] =RTLLIB_BASIC_RATE_MASK |RTLLIB_CCK_RATE_11MB ; - }else + }else { ieee->current_network.rates_len =0 ; + }if (ieee->modulation &RTLLIB_OFDM_MODULATION ) { ieee->current_network.rates_ex_len =8 ;
@@ -3119,10 +3122,10 @@ void notify_wx_assoc_event(struct rtllib_device *ieee)return ; wrqu.ap_addr.sa_family =ARPHRD_ETHER ; -if (ieee->link_state ==MAC80211_LINKED ) +if (ieee->link_state ==MAC80211_LINKED ) {memcpy (wrqu.ap_addr.sa_data, ieee->current_network.bssid,ETH_ALEN ); -else { + }else {netdev_info (ieee->dev,"%s(): Tell user space disconnected\n" , __func__);eth_zero_addr (wrqu.ap_addr.sa_data);
drivers/staging/rtl8192e/rtllib_softmac_wx.c +2 -2
@@ -231,9 +231,9 @@ int rtllib_wx_set_rts(struct rtllib_device *ieee,struct iw_request_info *info, union iwreq_data *wrqu, char *extra) { - if (wrqu->rts.disabled || !wrqu->rts.fixed) + if (wrqu->rts.disabled || !wrqu->rts.fixed) { ieee->rts = DEFAULT_RTS_THRESHOLD; - else { + } else {if (wrqu->rts.value <MIN_RTS_THRESHOLD || wrqu->rts.value >MAX_RTS_THRESHOLD )return -EINVAL ;
Signature · 1 line
2.41.0
PATCH 2/4 staging: rtl8192e: convert else if sequence to switch
In reply to Michael StraubeConvert a sequence of else if statements that all check the same variable to a single switch statement. With a switch statement it is easier to see what is going on. Additionally this clears a checkpatch warning.
WARNING: braces {} are not necessary for any arm of this statement
--- drivers/staging/rtl8192e/rtllib_softmac.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-)
drivers/staging/rtl8192e/rtllib_softmac.c +9 -5
@@ -2830,15 +2830,19 @@ void rtllib_start_protocol(struct rtllib_device *ieee)* attempts does not fail just because the user provide the essid * and the nic is still checking for the AP MAC ?? */ -if (ieee->iw_mode ==IW_MODE_INFRA ) { +switch (ieee->iw_mode) { +case IW_MODE_INFRA :rtllib_start_bss (ieee); - }else if (ieee->iw_mode ==IW_MODE_ADHOC ) { +break ; +case IW_MODE_ADHOC :rtllib_start_ibss (ieee); - - }else if (ieee->iw_mode ==IW_MODE_MASTER ) { +break ; +case IW_MODE_MASTER :rtllib_start_master_bss (ieee); - }else if (ieee->iw_mode ==IW_MODE_MONITOR ) { +break ; +case IW_MODE_MONITOR :rtllib_start_monitor_mode (ieee); +break ; } }
Signature · 1 line
2.41.0
PATCH 3/4 staging: rtl8192e: remove return statement from void function
In reply to Michael StraubeRemove unnecessary return statement from the void function rtl92e_config_mac(). Issue found by checkpatch.
WARNING: void function return statements are not generally useful
--- drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c | 1 - 1 file changed, 1 deletion(-)
drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c +0 -1
@@ -268,7 +268,6 @@ void rtl92e_config_mac(struct net_device *dev)rtl92e_set_bb_reg (dev, pdwArray[i], pdwArray[i +1 ], pdwArray[i +2 ]); } -return ; }static void _rtl92e_phy_config_bb (struct net_device *dev,u8 ConfigType)
Signature · 1 line
2.41.0
PATCH 4/4 staging: rtl8192e: remove comparison to true
In reply to Michael StraubeRemove a comparison to true reported by checkpatch.
CHECK: Using comparison to true is error prone
--- drivers/staging/rtl8192e/rtl8192e/rtl_wx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/rtl8192e/rtl8192e/rtl_wx.c +1 -1
@@ -391,7 +391,7 @@ static int _rtl92e_wx_set_scan(struct net_device *dev, rt_state = priv->rtllib->rf_power_state;if (!priv->up)return -ENETDOWN ; -if (priv->rtllib->link_detect_info.bBusyTraffic == true) +if (priv->rtllib->link_detect_info.bBusyTraffic)return -EAGAIN ;if (wrqu->data.flags &IW_SCAN_THIS_ESSID ) {
Signature · 1 line
2.41.0
Quoted 8 lines · Michael Straube
Four patches with simple coding style cleanups.
Michael Straube (4):
staging: rtl8192e: clean up brace coding style issues
staging: rtl8192e: convert else if sequence to switch
staging: rtl8192e: remove return statement from void function
staging: rtl8192e: remove comparison to true
Quoted 9 lines
.../staging/rtl8192e/rtl8192e/r8192E_dev.c | 3 +- .../staging/rtl8192e/rtl8192e/r8192E_phy.c | 11 +++--- drivers/staging/rtl8192e/rtl8192e/rtl_dm.c | 3 +- drivers/staging/rtl8192e/rtl8192e/rtl_ps.c | 3 +- drivers/staging/rtl8192e/rtl8192e/rtl_wx.c | 6 +-- drivers/staging/rtl8192e/rtllib_softmac.c | 39 +++++++++++-------- drivers/staging/rtl8192e/rtllib_softmac_wx.c | 4 +- 7 files changed, 40 insertions(+), 29 deletions(-)