Skip to contentSkip to conversation

scsi: Simplify scsi_cdl_check_cmd()

PATCH Applied Damien Le Moal 3 participants 3 messages Jun 23, 2023 – Jun 29, 2023 SCSI

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 scsi: Simplify scsi_cdl_check_cmd()

Reading the 800+ pages of SPC often leads to a brain shutdown and to less than ideal code... This resulted in the checks of the rwcdlp and cdlp fields in scsi_cdl_check_cmd() to have identical if-else branches.

Replace this with a comment describing the cases we are interested in and replace the if-else code block with a simple test of the cdlp field that is used as the function return value.

---
Changes from v1:
* Reword the comment to follow SPC wording for "One_command parameter data format"

 drivers/scsi/scsi.c | 37 ++++++++++++++-----------------------
 1 file changed, 14 insertions(+), 23 deletions(-)
drivers/scsi/scsi.c +14 -23
index c4bf99a842f3..d0911bc28663 100644
@@ -586,31 +586,22 @@ static bool scsi_cdl_check_cmd(struct scsi_device *sdev, u8 opcode, u16 sa,
 	if ((buf[1] & 0x03) != 0x03)
 		return false;
 
-	/* See SPC-6, one command format of REPORT SUPPORTED OPERATION CODES */
+	/*
+	 * See SPC-6, One_command parameter data format for
+	 * REPORT SUPPORTED OPERATION CODES. We have the following cases
+	 * depending on rwcdlp (buf[0] & 0x01) value:
+	 *  - rwcdlp == 0: then cdlp indicates support for the A mode page when
+	 *		   it is equal to 1 and for the B mode page when it is
+	 *		   equal to 2.
+	 *  - rwcdlp == 1: then cdlp indicates support for the T2A mode page
+	 *		   when it is equal to 1 and for the T2B mode page when
+	 *		   it is equal to 2.
+	 * Overall, to detect support for command duration limits, we only need
+	 * to check that cdlp is 1 or 2.
+	 */
 	cdlp = (buf[1] & 0x18) >> 3;
-	if (buf[0] & 0x01) {
-		/* rwcdlp == 1 */
-		switch (cdlp) {
-		case 0x01:
-			/* T2A page */
-			return true;
-		case 0x02:
-			/* T2B page */
-			return true;
-		}
-	} else {
-		/* rwcdlp == 0 */
-		switch (cdlp) {
-		case 0x01:
-			/* A page */
-			return true;
-		case 0x02:
-			/* B page */
-			return true;
-		}
-	}
 
-	return false;
+	return cdlp == 0x01 || cdlp == 0x02;
 }
 
 /**
Signature · 1 line
2.40.1
#2 lore raw
In reply to Damien Le Moal

Damien,

Quoted 4 lines

Reading the 800+ pages of SPC often leads to a brain shutdown and to less than ideal code... This resulted in the checks of the rwcdlp and cdlp fields in scsi_cdl_check_cmd() to have identical if-else branches.

Applied to 6.5/scsi-staging, thanks!

Signature · 1 line
Martin K. Petersen	Oracle Linux Engineering