memblock: Introduce memblock_reserve_node()
PATCH 1/1 memblock: Introduce memblock_reserve_node()
It only returns address now in memblock_find_in_range_node(), we can add a parameter pointing to integer for node id of the range, which can be used to pass the node id to the new reserve region.
Introduce memblock_reserve_node() so that the node id can be passed to the reserve region in memblock_alloc_range_nid().
--- mm/memblock.c | 39 +++++++++++++++++++++++++++------------ 1 file changed, 27 insertions(+), 12 deletions(-)
mm/memblock.c +27 -12
@@ -204,6 +204,7 @@ bool __init_memblock memblock_overlaps_region(struct memblock_type *type,* @align: alignment of free area to find * @nid: nid of the free area to find, %NUMA_NO_NODE for any node * @flags: pick from blocks based on memory attributes +* @p_nid: ptr to int for nid of the range, can be %NULL * * Utility called from memblock_find_in_range_node(), find free area bottom-up. *
@@ -213,12 +214,12 @@ bool __init_memblock memblock_overlaps_region(struct memblock_type *type, static phys_addr_t __init_memblock__memblock_find_range_bottom_up (phys_addr_t start,phys_addr_t end,phys_addr_t size,phys_addr_t align,int nid, -enum memblock_flags flags) +enum memblock_flags flags,int *p_nid) {phys_addr_t this_start, this_end, cand;u64 i; -for_each_free_mem_range (i, nid, flags, &this_start, &this_end,NULL ) { +for_each_free_mem_range (i, nid, flags, &this_start, &this_end, p_nid) { this_start =clamp (this_start, start, end); this_end =clamp (this_end, start, end);
@@ -239,6 +240,7 @@ __memblock_find_range_bottom_up(phys_addr_t start, phys_addr_t end,* @align: alignment of free area to find * @nid: nid of the free area to find, %NUMA_NO_NODE for any node * @flags: pick from blocks based on memory attributes +* @p_nid: ptr to int for nid of the range, can be %NULL * * Utility called from memblock_find_in_range_node(), find free area top-down. *
@@ -248,13 +250,13 @@ __memblock_find_range_bottom_up(phys_addr_t start, phys_addr_t end, static phys_addr_t __init_memblock__memblock_find_range_top_down (phys_addr_t start,phys_addr_t end,phys_addr_t size,phys_addr_t align,int nid, -enum memblock_flags flags) +enum memblock_flags flags,int *p_nid) {phys_addr_t this_start, this_end, cand;u64 i;for_each_free_mem_range_reverse (i, nid, flags, &this_start, &this_end, -NULL ) { + p_nid) { this_start =clamp (this_start, start, end); this_end =clamp (this_end, start, end);
@@ -278,6 +280,7 @@ __memblock_find_range_top_down(phys_addr_t start, phys_addr_t end,* %MEMBLOCK_ALLOC_ACCESSIBLE * @nid: nid of the free area to find, %NUMA_NO_NODE for any node * @flags: pick from blocks based on memory attributes +* @p_nid: ptr to int for nid of the range, can be %NULL * * Find @size free area aligned to @align in the specified range and node. *
@@ -287,7 +290,7 @@ __memblock_find_range_top_down(phys_addr_t start, phys_addr_t end, static phys_addr_t __init_memblock memblock_find_in_range_node(phys_addr_t size,phys_addr_t align,phys_addr_t start,phys_addr_t end,int nid, -enum memblock_flags flags) +enum memblock_flags flags,int *p_nid) {/* pump up @end */ if (end == MEMBLOCK_ALLOC_ACCESSIBLE ||
@@ -300,10 +303,10 @@ static phys_addr_t __init_memblock memblock_find_in_range_node(phys_addr_t size,if (memblock_bottom_up ())return __memblock_find_range_bottom_up (start, end, size, align, - nid, flags); + nid, flags, p_nid);else return __memblock_find_range_top_down (start, end, size, align, - nid, flags); + nid, flags, p_nid); }/**
@@ -328,7 +331,7 @@ static phys_addr_t __init_memblock memblock_find_in_range(phys_addr_t start, again: ret =memblock_find_in_range_node (size, align, start, end, -NUMA_NO_NODE , flags); +NUMA_NO_NODE , flags,NULL );if (!ret && (flags &MEMBLOCK_MIRROR )) { pr_warn_ratelimited("Could not allocate %pap bytes of mirrored memory\n",
@@ -863,6 +866,17 @@ int __init_memblock memblock_phys_free(phys_addr_t base, phys_addr_t size)return memblock_remove_range (&memblock.reserved, base, size); } +static int __init_memblock memblock_reserve_node(phys_addr_t base, phys_addr_t size, +int nid,enum memblock_flags flags) +{ +phys_addr_t end = base + size -1 ; + +memblock_dbg ("%s: [%pa-%pa] nid=%d flags=%x %pS\n" , __func__, + &base, &end, nid, flags, (void *)_RET_IP_); + +return memblock_add_range (&memblock.reserved, base, size, nid, flags); +} + int __init_memblock memblock_reserve(phys_addr_t base, phys_addr_t size) {phys_addr_t end = base + size -1 ;
@@ -1389,6 +1403,7 @@ phys_addr_t __init memblock_alloc_range_nid(phys_addr_t size, {enum memblock_flags flags =choose_memblock_flags ();phys_addr_t found; +int p_nid;if (WARN_ONCE (nid ==MAX_NUMNODES ,"Usage of MAX_NUMNODES is deprecated. Use NUMA_NO_NODE instead\n" )) nid =NUMA_NO_NODE ;
@@ -1401,15 +1416,15 @@ phys_addr_t __init memblock_alloc_range_nid(phys_addr_t size, again: found =memblock_find_in_range_node (size, align, start, end, nid, - flags); -if (found && !memblock_reserve (found, size)) + flags, &p_nid); +if (found && !memblock_reserve_node (found, size, p_nid, flags)) goto done;if (nid !=NUMA_NO_NODE && !exact_nid) { found =memblock_find_in_range_node (size, align, start, end,NUMA_NO_NODE , - flags); -if (found && !memblock_reserve (found, size)) + flags, &p_nid); +if (found && !memblock_reserve_node (found, size, p_nid, flags)) goto done; }
Signature · 1 line
2.25.1
Mike Rapoport
maintainerQuoted 8 lines · Yajun Deng
It only returns address now in
memblock_find_in_range_node(), we can add a parameter pointing to integer for node id of the range, which can be used to pass the node id to the new reserve region.Introduce
memblock_reserve_node()so that the node id can be passed to the reserve region inmemblock_alloc_range_nid().Signed-off-by Yajun Deng <[email protected]>
What problem does this patch solve?
Signature · 2 lines
Sincerely yours, Mike.
Quoted 6 lines · Mike Rapoport
Quoted 4 lines · Yajun Deng
It only returns address now in
memblock_find_in_range_node(), we can add a parameter pointing to integer for node id of the range, which can be used to pass the node id to the new reserve region.
Quoted 7 lines
Quoted 4 lines
Introduce
memblock_reserve_node()so that the node id can be passed to the reserve region inmemblock_alloc_range_nid().Signed-off-by Yajun Deng <[email protected]>What problem does this patch solve?
If we set nid and flags in memblock_alloc_range_nid(), we may not need memblock_set_node() in memmap_init_reserved_pages().
I tested this patch and delete memblock_set_node() in memmap_init_reserved_pages(). It works fine. I did not delete memblock_set_node() in this patch just in case.
Quoted 3 lines
--
Sincerely yours,
Mike.
Mike Rapoport
maintainerQuoted 11 lines · Yajun Deng
Quoted 9 lines · Mike Rapoport
Quoted 7 lines · Yajun Deng
It only returns address now in
memblock_find_in_range_node(), we can add a parameter pointing to integer for node id of the range, which can be used to pass the node id to the new reserve region.Introduce
memblock_reserve_node()so that the node id can be passed to the reserve region inmemblock_alloc_range_nid().
Quoted 7 lines
Quoted 4 lines
Quoted 1 line
Signed-off-by Yajun Deng <[email protected]>What problem does this patch solve?
If we set nid and flags in
memblock_alloc_range_nid(), we may not needmemblock_set_node()inmemmap_init_reserved_pages().
When memblock_reserve() is called before NUMA setup, the node ids are still unset in memblock.memory, so very early reservations will be missed and we still have to update node ids in memblock.reserved later.
Quoted 2 lines
I tested this patch and delete
memblock_set_node()inmemmap_init_reserved_pages(). It works fine. I did not deletememblock_set_node()in this patch just in case.
Signature · 2 lines
Sincerely yours, Mike.
Quoted 15 lines · Mike Rapoport
Quoted 13 lines · Yajun Deng
June 25, 2023 1:08 PM, "Mike Rapoport" <[email protected]> wrote:
On Sat, Jun 24, 2023 at 10:46:22AM +0800, Yajun Deng wrote:
It only returns address now in
memblock_find_in_range_node(), we can add a parameter pointing to integer for node id of the range, which can be used to pass the node id to the new reserve region.Introduce
memblock_reserve_node()so that the node id can be passed to the reserve region inmemblock_alloc_range_nid().Signed-off-by Yajun Deng <[email protected]>
Quoted 8 lines
Quoted 4 lines
What problem does this patch solve?
If we set nid and flags in
memblock_alloc_range_nid(), we may not needmemblock_set_node()inmemmap_init_reserved_pages().When
memblock_reserve()is called before NUMA setup, the node ids are still unset in memblock.memory, so very early reservations will be missed and we still have to update node ids in memblock.reserved later.
Even so, we still need to pass the 'flags' to the new reserve region. choose_memblock_flags() may return MEMBLOCK_MIRROR in memblock_alloc_range_nid(), memblock_reserve() couldn't pass this flag in this case.
Quoted 6 lines
Quoted 2 lines
I tested this patch and delete
memblock_set_node()inmemmap_init_reserved_pages(). It works fine. I did not deletememblock_set_node()in this patch just in case.--
Sincerely yours,
Mike.
Mike Rapoport
maintainerQuoted 22 lines · Yajun Deng
Quoted 20 lines · Mike Rapoport
Quoted 17 lines · Yajun Deng
June 25, 2023 1:08 PM, "Mike Rapoport" <[email protected]> wrote:
On Sat, Jun 24, 2023 at 10:46:22AM +0800, Yajun Deng wrote:
It only returns address now in
memblock_find_in_range_node(), we can add a parameter pointing to integer for node id of the range, which can be used to pass the node id to the new reserve region.Introduce
memblock_reserve_node()so that the node id can be passed to the reserve region inmemblock_alloc_range_nid().Signed-off-by Yajun Deng <[email protected]>What problem does this patch solve?
If we set nid and flags in
memblock_alloc_range_nid(), we may not needmemblock_set_node()inmemmap_init_reserved_pages().
Quoted 7 lines
Quoted 3 lines
When
memblock_reserve()is called before NUMA setup, the node ids are still unset in memblock.memory, so very early reservations will be missed and we still have to update node ids in memblock.reserved later.Even so, we still need to pass the 'flags' to the new reserve region.
choose_memblock_flags()may returnMEMBLOCK_MIRRORinmemblock_alloc_range_nid(),memblock_reserve()couldn't pass this flag in this case.
flags are only relevant to memblock.memory, we don't care about the flags in memblock.reserved.
Quoted 6 lines
Quoted 6 lines
Quoted 2 lines
I tested this patch and delete
memblock_set_node()inmemmap_init_reserved_pages(). It works fine. I did not deletememblock_set_node()in this patch just in case.--
Sincerely yours,
Mike.
Signature · 2 lines
Sincerely yours, Mike.
Quoted 28 lines · Mike Rapoport
Quoted 26 lines · Yajun Deng
June 26, 2023 2:21 PM, "Mike Rapoport" <[email protected]> wrote:
On Sun, Jun 25, 2023 at 07:39:10AM +0000, Yajun Deng wrote:
June 25, 2023 1:08 PM, "Mike Rapoport" <[email protected]> wrote:
On Sat, Jun 24, 2023 at 10:46:22AM +0800, Yajun Deng wrote:
It only returns address now in
memblock_find_in_range_node(), we can add a parameter pointing to integer for node id of the range, which can be used to pass the node id to the new reserve region.Introduce
memblock_reserve_node()so that the node id can be passed to the reserve region inmemblock_alloc_range_nid().Signed-off-by Yajun Deng <[email protected]>What problem does this patch solve?
If we set nid and flags in
memblock_alloc_range_nid(), we may not needmemblock_set_node()inmemmap_init_reserved_pages().When
memblock_reserve()is called before NUMA setup, the node ids are still unset in memblock.memory, so very early reservations will be missed and we still have to update node ids in memblock.reserved later.
Quoted 7 lines
Quoted 3 lines
Even so, we still need to pass the 'flags' to the new reserve region.
choose_memblock_flags()may returnMEMBLOCK_MIRRORinmemblock_alloc_range_nid(),memblock_reserve()couldn't pass this flag in this case.flags are only relevant to memblock.memory, we don't care about the flags in memblock.reserved.
get it.
Quoted 10 lines
Quoted 6 lines
I tested this patch and delete
memblock_set_node()inmemmap_init_reserved_pages(). It works fine. I did not deletememblock_set_node()in this patch just in case.--
Sincerely yours,
Mike.--
Sincerely yours,
Mike.