refactor Kconfig to consolidate KEXEC and CRASH options
Subsystems (11)
PATCH v3 2/13 x86/kexec: refactor for kernel/Kconfig.kexec
In reply to Eric DeVolderThe kexec and crash kernel options are provided in the common kernel/Kconfig.kexec. Utilize the common options and provide the ARCH_SUPPORTS_ and ARCH_SELECTS_ entries to recreate the equivalent set of KEXEC and CRASH options.
--- arch/x86/Kconfig | 89 +++++++----------------------------------------- 1 file changed, 13 insertions(+), 76 deletions(-)
arch/x86/Kconfig +13 -76
@@ -2043,88 +2043,25 @@ config EFI_RUNTIME_MAP source "kernel/Kconfig.hz" -config KEXEC - bool "kexec system call" - select KEXEC_CORE - help - kexec is a system call that implements the ability to shutdown your - current kernel, and to start another kernel. It is like a reboot - but it is independent of the system firmware. And like a reboot - you can start any kernel with it, not just Linux. - - The name comes from the similarity to the exec system call. - - It is an ongoing process to be certain the hardware in a machine - is properly shutdown, so do not be surprised if this code does not - initially work for you. As of this writing the exact hardware - interface is strongly in flux, so no good recommendation can be - made. - -config KEXEC_FILE - bool "kexec file based system call" - select KEXEC_CORE - select HAVE_IMA_KEXEC if IMA - depends on X86_64 - depends on CRYPTO=y - depends on CRYPTO_SHA256=y - help - This is new version of kexec system call. This system call is - file based and takes file descriptors as system call argument - for kernel and initramfs as opposed to list of segments as - accepted by previous system call. +config ARCH_SUPPORTS_KEXEC + def_bool y -config ARCH_HAS_KEXEC_PURGATORY - def_bool KEXEC_FILE +config ARCH_SUPPORTS_KEXEC_FILE + def_bool X86_64 && CRYPTO && CRYPTO_SHA256 -config KEXEC_SIG - bool "Verify kernel signature during kexec_file_load() syscall" +config ARCH_SELECTS_KEXEC_FILE + def_bool y depends on KEXEC_FILE - help - - This option makes the kexec_file_load() syscall check for a valid - signature of the kernel image. The image can still be loaded without - a valid signature unless you also enable KEXEC_SIG_FORCE, though if - there's a signature that we can check, then it must be valid. - - In addition to this option, you need to enable signature - verification for the corresponding kernel image type being - loaded in order for this to work. - -config KEXEC_SIG_FORCE - bool "Require a valid signature in kexec_file_load() syscall" - depends on KEXEC_SIG - help - This option makes kernel signature verification mandatory for - the kexec_file_load() syscall. + select HAVE_IMA_KEXEC if IMA -config KEXEC_BZIMAGE_VERIFY_SIG - bool "Enable bzImage signature verification support" - depends on KEXEC_SIG - depends on SIGNED_PE_FILE_VERIFICATION - select SYSTEM_TRUSTED_KEYRING - help - Enable bzImage signature verification support. +config ARCH_HAS_KEXEC_PURGATORY + def_bool KEXEC_FILE -config CRASH_DUMP - bool "kernel crash dumps" - depends on X86_64 || (X86_32 && HIGHMEM) - help - Generate crash dump after being started by kexec. - This should be normally only set in special crash dump kernels - which are loaded in the main kernel with kexec-tools into - a specially reserved region and then later executed after - a crash by kdump/kexec. The crash dump kernel must be compiled - to a memory address not used by the main kernel or BIOS using - PHYSICAL_START, or it must be built as a relocatable image - (CONFIG_RELOCATABLE=y). - For more details see Documentation/admin-guide/kdump/kdump.rst +config ARCH_SUPPORTS_KEXEC_JUMP + def_bool y -config KEXEC_JUMP - bool "kexec jump" - depends on KEXEC && HIBERNATION - help - Jump between original kernel and kexeced kernel and invoke - code in physical address mode via KEXEC +config ARCH_SUPPORTS_CRASH_DUMP + def_bool X86_64 || (X86_32 && HIGHMEM) config PHYSICAL_START hex "Physical address where the kernel is loaded" if (EXPERT || CRASH_DUMP)
Signature · 1 line
2.31.1
PATCH v3 1/13 kexec: consolidate kexec and crash options into kernel/Kconfig.kexec
In reply to Eric DeVolderThe config options for kexec and crash features are consolidated into new file kernel/Kconfig.kexec. Under the "General Setup" submenu is a new submenu "Kexec and crash handling". All the kexec and crash options that were once in the arch-dependent submenu "Processor type and features" are now consolidated in the new submenu.
The following options are impacted:
- KEXEC
- KEXEC_FILE
- KEXEC_SIG
- KEXEC_SIG_FORCE
- KEXEC_BZIMAGE_VERIFY_SIG
- KEXEC_JUMP
- CRASH_DUMP
The three main options are KEXEC, KEXEC_FILE and CRASH_DUMP.
Architectures specify support of certain KEXEC and CRASH features with similarly named new ARCH_SUPPORTS_<option> config options.
Architectures can utilize the new ARCH_SELECTS_<option> config options to specify additional components when <option> is enabled.
To summarize, the ARCH_SUPPORTS_<option> permits the <option> to be enabled, and the ARCH_SELECTS_<option> handles side effects (ie. select statements).
--- arch/Kconfig | 13 ----- init/Kconfig | 2 + kernel/Kconfig.kexec | 110 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 112 insertions(+), 13 deletions(-) create mode 100644 kernel/Kconfig.kexec
arch/Kconfig +0 -13
@@ -11,19 +11,6 @@ source "arch/$(SRCARCH)/Kconfig" menu "General architecture-dependent options" -config CRASH_CORE - bool - -config KEXEC_CORE - select CRASH_CORE - bool - -config KEXEC_ELF - bool - -config HAVE_IMA_KEXEC - bool - config ARCH_HAS_SUBPAGE_FAULTS bool help
init/Kconfig +2 -0
@@ -1917,6 +1917,8 @@ config BINDGEN_VERSION_TEXT config TRACEPOINTS bool +source "kernel/Kconfig.kexec" + endmenu # General setup source "arch/Kconfig"
kernel/Kconfig.kexec new file +110 -0
110 lines not on this page · raw message
Signature · 1 line
2.31.1
PATCH v3 3/13 arm/kexec: refactor for kernel/Kconfig.kexec
In reply to Eric DeVolderThe kexec and crash kernel options are provided in the common kernel/Kconfig.kexec. Utilize the common options and provide the ARCH_SUPPORTS_ and ARCH_SELECTS_ entries to recreate the equivalent set of KEXEC and CRASH options.
--- arch/arm/Kconfig | 29 ++++------------------------- 1 file changed, 4 insertions(+), 25 deletions(-)
arch/arm/Kconfig +4 -25
@@ -1639,20 +1639,8 @@ config XIP_DEFLATED_DATA copied, saving some precious ROM space. A possible drawback is a slightly longer boot delay. -config KEXEC - bool "Kexec system call (EXPERIMENTAL)" - depends on (!SMP || PM_SLEEP_SMP) - depends on MMU - select KEXEC_CORE - help - kexec is a system call that implements the ability to shutdown your - current kernel, and to start another kernel. It is like a reboot - but it is independent of the system firmware. And like a reboot - you can start any kernel with it, not just Linux. - - It is an ongoing process to be certain the hardware in a machine - is properly shutdown, so do not be surprised if this code does not - initially work for you. +config ARCH_SUPPORTS_KEXEC + def_bool (!SMP || PM_SLEEP_SMP) && MMU config ATAGS_PROC bool "Export atags in procfs"
@@ -1662,17 +1650,8 @@ config ATAGS_PROC Should the atags used to boot the kernel be exported in an "atags" file in procfs. Useful with kexec. -config CRASH_DUMP - bool "Build kdump crash kernel (EXPERIMENTAL)" - help - Generate crash dump after being started by kexec. This should - be normally only set in special crash dump kernels which are - loaded in the main kernel with kexec-tools into a specially - reserved region and then later executed after a crash by - kdump/kexec. The crash dump kernel must be compiled to a - memory address not used by the main kernel - - For more details see Documentation/admin-guide/kdump/kdump.rst +config ARCH_SUPPORTS_CRASH_DUMP + def_bool y config AUTO_ZRELADDR bool "Auto calculation of the decompressed kernel image address" if !ARCH_MULTIPLATFORM
Signature · 1 line
2.31.1
v3 cover refactor Kconfig to consolidate KEXEC and CRASH options
The Kconfig is refactored to consolidate KEXEC and CRASH options from various arch/<arch>/Kconfig files into new file kernel/Kconfig.kexec.
The Kconfig.kexec is now a submenu titled "Kexec and crash features" located under "General Setup".
The following options are impacted:
- KEXEC
- KEXEC_FILE
- KEXEC_SIG
- KEXEC_SIG_FORCE
- KEXEC_BZIMAGE_VERIFY_SIG
- KEXEC_JUMP
- CRASH_DUMP
Over time, these options have been copied between Kconfig files and are very similar to one another, but with slight differences.
The following architectures are impacted by the refactor (because of use of one or more KEXEC/CRASH options):
- arm
- arm64
- ia64
- loongarch
- m68k
- mips
- parisc
- powerpc
- riscv
- s390
- sh
- x86
More information:
In the patch series "crash: Kernel handling of CPU and memory hot un/plug"
https://lore.kernel.org/lkml/[email protected]/
the new kernel feature introduces the config option CRASH_HOTPLUG.
In reviewing, Thomas Gleixner requested that the new config option not be placed in x86 Kconfig. Rather the option needs a generic/common home. To Thomas' point, the KEXEC and CRASH options have largely been duplicated in the various arch/<arch>/Kconfig files, with minor differences. This kind of proliferation is to be avoid/stopped.
https://lore.kernel.org/lkml/875y91yv63.ffs@tglx/
To that end, I have refactored the arch Kconfigs so as to consolidate the various KEXEC and CRASH options. Generally speaking, this work has the following themes:
- KEXEC and CRASH options are moved into new file kernel/Kconfig.kexec
- These items from arch/Kconfig:
CRASH_CORE KEXEC_CORE KEXEC_ELF HAVE_IMA_KEXEC
- These items from arch/x86/Kconfig form the common options:
KEXEC KEXEC_FILE KEXEC_SIG KEXEC_SIG_FORCE KEXEC_BZIMAGE_VERIFY_SIG KEXEC_JUMP CRASH_DUMP
- The crash hotplug series appends CRASH_HOTPLUG to Kconfig.kexec
NOTE: PHYSICAL_START could be argued to be included in this series.
- The Kconfig.kexec is now a submenu titled "Kexec and crash features"
- The Kconfig.kexec is now listed in "General Setup" submenu from init/Kconfig
- To control the main common options, new options ARCH_SUPPORTS_KEXEC, ARCH_SUPPORTS_KEXEC_FILE and ARCH_SUPPORTS_CRASH_DUMP are introduced.
NOTE: The existing ARCH_HAS_KEXEC_PURGATORY remains unchanged.
- To account for the slight differences, new options ARCH_SELECTS_KEXEC, ARCH_SELECTS_KEXEC_FILE and ARCH_SELECTS_CRASH_DUMP are used to elicit the same side effects as the original arch/<arch>/Kconfig files for KEXEC and CRASH options.
An example, 'make menuconfig' illustrating the submenu:
Quoted 1 line
General setup > Kexec and crash features
[*] Enable kexec system call
[*] Enable kexec file based system call
[*] Verify kernel signature during kexec_file_load() syscall
[ ] Require a valid signature in kexec_file_load() syscall
[ ] Enable bzImage signature verification support
[*] kexec jump
[*] kernel crash dumps
[*] Update the crash elfcorehdr on system configuration changes
The three main options are KEXEC, KEXEC_FILE and CRASH_DUMP. In the process of consolidating these options, I encountered slight differences in the coding of these options in several of the architectures. As a result, I settled on the following solution:
- Each of three main options has a 'depends on ARCH_SUPPORTS_<option>'
statement: ARCH_SUPPORTS_KEXEC, ARCH_SUPPORTS_KEXEC_FILE, ARCH_SUPPORTS_CRASH_DUMP.
For example, the KEXEC_FILE option has a 'depends on ARCH_SUPPORTS_KEXEC_FILE' statement.
- The boolean ARCH_SUPPORTS_<option> in effect allows the arch to determine when the feature is allowed. Archs which don't have the feature simply do not provide the corresponding ARCH_SUPPORTS_<option>. For each arch, where there previously were KEXEC and/or CRASH options, these have been replaced with the corresponding boolean ARCH_SUPPORTS_<option>, and an appropriate def_bool statement.
For example, if the arch supports KEXEC_FILE, then the ARCH_SUPPORTS_KEXEC_FILE simply has a 'def_bool y'. This permits the KEXEC_FILE option to be available.
If the arch has a 'depends on' statement in its original coding of the option, then that expression becomes part of the def_bool expression. For example, arm64 had:
config KEXEC
depends on PM_SLEEP_SMP
and in this solution, this converts to:
config ARCH_SUPPORTS_KEXEC
def_bool PM_SLEEP_SMP
- In order to account for the differences in the config coding for the three common options, the ARCH_SELECTS_<option> is used. This options has a 'depends on <option>' statement to couple it to the main option, and from there can insert the differences from the common option and the arch original coding of that option.
For example, a few archs enable CRYPTO and CRYTPO_SHA256 for KEXEC_FILE. These require a ARCH_SELECTS_KEXEC_FILE and 'select CRYPTO' and 'select CRYPTO_SHA256' statements.
Illustrating the option relationships:
For KEXEC:
ARCH_SUPPORTS_KEXEC <- KEXEC <- ARCH_SELECTS_KEXEC
KEXEC # in Kconfig.kexec ARCH_SUPPORTS_KEXEC # in arch/<arch>/Kconfig, as needed ARCH_SELECTS_KEXEC # in arch/<arch>/Kconfig, as needed
For KEXEC_FILE:
ARCH_SUPPORTS_KEXEC_FILE <- KEXEC_FILE <- ARCH_SELECTS_KEXEC_FILE
KEXEC_FILE # in Kconfig.kexec ARCH_SUPPORTS_KEXEC_FILE # in arch/<arch>/Kconfig, as needed ARCH_SELECTS_KEXEC_FILE # in arch/<arch>/Kconfig, as needed
For CRASH:
ARCH_SUPPORTS_CRASH_DUMP <- CRASH_DUMP <- ARCH_SELECTS_CRASH_DUMP
CRASH_DUMP # in Kconfig.kexec ARCH_SUPPORTS_CRASH_DUMP # in arch/<arch>/Kconfig, as needed ARCH_SELECTS_CRASH_DUMP # in arch/<arch>/Kconfig, as needed
To summarize, the ARCH_SUPPORTS_<option> permits the <option> to be enabled, and the ARCH_SELECTS_<option> handles side effects (ie. select statements).
Examples:
A few examples to show the new strategy in action:
===== x86 (minus the help section) =====
Original:
config KEXEC
bool "kexec system call"
select KEXEC_CORE
config KEXEC_FILE
bool "kexec file based system call"
select KEXEC_CORE
select HAVE_IMA_KEXEC if IMA
depends on X86_64
depends on CRYPTO=y
depends on CRYPTO_SHA256=y
config ARCH_HAS_KEXEC_PURGATORY
def_bool KEXEC_FILE
config KEXEC_SIG
bool "Verify kernel signature during kexec_file_load() syscall" depends on KEXEC_FILE
config KEXEC_SIG_FORCE
bool "Require a valid signature in kexec_file_load() syscall" depends on KEXEC_SIG
config KEXEC_BZIMAGE_VERIFY_SIG
bool "Enable bzImage signature verification support" depends on KEXEC_SIG
depends on SIGNED_PE_FILE_VERIFICATION select SYSTEM_TRUSTED_KEYRING
config CRASH_DUMP
bool "kernel crash dumps"
depends on X86_64 || (X86_32 && HIGHMEM)
config KEXEC_JUMP
bool "kexec jump"
depends on KEXEC && HIBERNATION
help
becomes...
New:
config ARCH_SUPPORTS_KEXEC
def_bool y
config ARCH_SUPPORTS_KEXEC_FILE
def_bool X86_64 && CRYPTO && CRYPTO_SHA256
config ARCH_SELECTS_KEXEC_FILE
def_bool y
depends on KEXEC_FILE
select HAVE_IMA_KEXEC if IMA
config ARCH_HAS_KEXEC_PURGATORY
def_bool KEXEC_FILE
config ARCH_SUPPORTS_KEXEC_JUMP
def_bool y
config ARCH_SUPPORTS_CRASH_DUMP
def_bool X86_64 || (X86_32 && HIGHMEM)
===== powerpc (minus the help section) ===== Original:
config KEXEC
bool "kexec system call"
depends on PPC_BOOK3S || PPC_E500 || (44x && !SMP) select KEXEC_CORE
config KEXEC_FILE
bool "kexec file based system call"
select KEXEC_CORE
select HAVE_IMA_KEXEC if IMA
select KEXEC_ELF
depends on PPC64
depends on CRYPTO=y
depends on CRYPTO_SHA256=y
config ARCH_HAS_KEXEC_PURGATORY
def_bool KEXEC_FILE
config CRASH_DUMP
bool "Build a dump capture kernel"
depends on PPC64 || PPC_BOOK3S_32 || PPC_85xx || (44x && !SMP)
select RELOCATABLE if PPC64 || 44x || PPC_85xxbecomes...
New:
config ARCH_SUPPORTS_KEXEC
def_bool PPC_BOOK3S || PPC_E500 || (44x && !SMP)
config ARCH_SUPPORTS_KEXEC_FILE
def_bool PPC64 && CRYPTO=y && CRYPTO_SHA256=y
config ARCH_HAS_KEXEC_PURGATORY
def_bool KEXEC_FILE
config ARCH_SELECTS_KEXEC_FILE
def_bool y
depends on KEXEC_FILE
select KEXEC_ELF
select HAVE_IMA_KEXEC if IMA
config ARCH_SUPPORTS_CRASH_DUMP
def_bool PPC64 || PPC_BOOK3S_32 || PPC_85xx || (44x && !SMP)
config ARCH_SELECTS_CRASH_DUMP
def_bool y
depends on CRASH_DUMP
select RELOCATABLE if PPC64 || 44x || PPC_85xx
Testing Approach and Results
There are 388 config files in the arch/<arch>/configs directories. For each of these config files, a .config is generated both before and after this Kconfig series, and checked for equivalence. This approach allows for a rather rapid check of all architectures and a wide variety of configs wrt/ KEXEC and CRASH, and avoids requiring compiling for all architectures and running kernels and run-time testing.
As such, the following script steps compare the before and after of 'make olddefconfig'. The new symbols introduced by this series are filtered out, but otherwise the config files are PASS only if they were equivalent, and FAIL otherwise.
The script performs the test by doing the following:
# Obtain the "golden" .config output for given config file # Reset test sandbox
git checkout master
git branch -D test_Kconfig
git checkout -B test_Kconfig master
make distclean
# Write out updated config
cp -f <config file> .config
make ARCH=<arch> olddefconfig
# Track each item in .config, LHSB is "golden" scoreboard .config
# Obtain the "changed" .config output for given config file # Reset test sandbox
make distclean
# Apply this Kconfig series
git am <this Kconfig series>
# Write out updated config
cp -f <config file> .config
make ARCH=<arch> olddefconfig
# Track each item in .config, RHSB is "changed" scoreboard .config
# Determine test result
# Filter-out new symbols introduced by this series
# Filter-out symbol=n which not in either scoreboard
# Compare LHSB "golden" and RHSB "changed" scoreboards and issue PASS/FAIL
The script was instrumental during the refactoring of Kconfig as it continually revealed problems. The end result being that the solution presented in this series passes all configs as checked by the script.
Regards,
eric
---
v3: 26jun2023
- Rebased onto 6.4.0
- Reworded s390 commit message to clarify MODULE_SIG_FORMAT, per Alexander Gordeev
- Applied Acked-by's from:
m68k: Geert Uytterhoeven <[email protected]>
mips: Thomas Bogendoerfer <[email protected]>
sh: John Paul Adrian Glaubitz <[email protected]>
v2: 19jun2023
https://lore.kernel.org/lkml/[email protected]/
- The ARCH_HAS_ and ARCH_SUPPORTS_ combination was found to be too similar/confusing. Renamed these two new options as such:
ARCH_HAS_<option> ---> ARCH_SUPPORTS_<option> ARCH_SUPPORTS_<option> ---> ARCH_SELECTS_<option> Per Kees Cook, Michael Ellerman
NOTE: ARCH_HAS_KEXEC_PURGATORY was left as-is, as that is what it is prior to this series.
Updated this cover letter to reflect the same.
- Some minor cleaning up of the help sections, per Zhen Lei and Alexander Gordeev.
- Removed the MODULE_SIG_FORMAT dependency from KEXEC_SIG in kernel/Kconfig.kexec. Only s390 had it prior to this series. See also commit message in
"s390/kexec: refactor for kernel/Kconfig.kexec"
- Added to Kconfig.kexec the KEXEC_IMAGE_VERIFY_SIG from arm64, per Zhen Lei.
- Fixed the powerpc ARCH_SUPPORTS_KEXEC_FILE conversion, per Michael Ellerman.
v1: 12jun2023
https://lore.kernel.org/lkml/[email protected]/
- Initial
- Based on 6.4.0-rc6
---
Eric DeVolder (13):
kexec: consolidate kexec and crash options into kernel/Kconfig.kexec x86/kexec: refactor for kernel/Kconfig.kexec
arm/kexec: refactor for kernel/Kconfig.kexec
ia64/kexec: refactor for kernel/Kconfig.kexec arm64/kexec: refactor for kernel/Kconfig.kexec loongarch/kexec: refactor for kernel/Kconfig.kexec m68k/kexec: refactor for kernel/Kconfig.kexec
mips/kexec: refactor for kernel/Kconfig.kexec parisc/kexec: refactor for kernel/Kconfig.kexec powerpc/kexec: refactor for kernel/Kconfig.kexec riscv/kexec: refactor for kernel/Kconfig.kexec s390/kexec: refactor for kernel/Kconfig.kexec
sh/kexec: refactor for kernel/Kconfig.kexec
arch/Kconfig | 13 ----- arch/arm/Kconfig | 29 ++--------- arch/arm64/Kconfig | 62 +++++------------------ arch/ia64/Kconfig | 28 ++--------- arch/loongarch/Kconfig | 26 +++------- arch/m68k/Kconfig | 19 +------ arch/mips/Kconfig | 32 ++---------- arch/parisc/Kconfig | 34 +++++-------- arch/powerpc/Kconfig | 55 +++++++-------------- arch/riscv/Kconfig | 48 ++++++------------ arch/s390/Kconfig | 65 +++++++----------------- arch/sh/Kconfig | 46 +++-------------- arch/x86/Kconfig | 89 +++++---------------------------- init/Kconfig | 2 + kernel/Kconfig.kexec | 110 +++++++++++++++++++++++++++++++++++++++++ 15 files changed, 229 insertions(+), 429 deletions(-) create mode 100644 kernel/Kconfig.kexec
Signature · 1 line
2.31.1
PATCH v3 4/13 ia64/kexec: refactor for kernel/Kconfig.kexec
The kexec and crash kernel options are provided in the common kernel/Kconfig.kexec. Utilize the common options and provide the ARCH_SUPPORTS_ and ARCH_SELECTS_ entries to recreate the equivalent set of KEXEC and CRASH options.
--- arch/ia64/Kconfig | 28 +++++----------------------- 1 file changed, 5 insertions(+), 23 deletions(-)
arch/ia64/Kconfig +5 -23
@@ -360,31 +360,13 @@ config IA64_HP_AML_NFW the "force" module parameter, e.g., with the "aml_nfw.force" kernel command line option. -config KEXEC - bool "kexec system call" - depends on !SMP || HOTPLUG_CPU - select KEXEC_CORE - help - kexec is a system call that implements the ability to shutdown your - current kernel, and to start another kernel. It is like a reboot - but it is independent of the system firmware. And like a reboot - you can start any kernel with it, not just Linux. - - The name comes from the similarity to the exec system call. - - It is an ongoing process to be certain the hardware in a machine - is properly shutdown, so do not be surprised if this code does not - initially work for you. As of this writing the exact hardware - interface is strongly in flux, so no good recommendation can be - made. +endmenu -config CRASH_DUMP - bool "kernel crash dumps" - depends on IA64_MCA_RECOVERY && (!SMP || HOTPLUG_CPU) - help - Generate crash dump after being started by kexec. +config ARCH_SUPPORTS_KEXEC + def_bool !SMP || HOTPLUG_CPU -endmenu +config ARCH_SUPPORTS_CRASH_DUMP + def_bool IA64_MCA_RECOVERY && (!SMP || HOTPLUG_CPU) menu "Power management and ACPI options"
Signature · 1 line
2.31.1
PATCH v3 6/13 loongarch/kexec: refactor for kernel/Kconfig.kexec
In reply to Eric DeVolderThe kexec and crash kernel options are provided in the common kernel/Kconfig.kexec. Utilize the common options and provide the ARCH_SUPPORTS_ and ARCH_SELECTS_ entries to recreate the equivalent set of KEXEC and CRASH options.
--- arch/loongarch/Kconfig | 26 +++++++------------------- 1 file changed, 7 insertions(+), 19 deletions(-)
arch/loongarch/Kconfig +7 -19
@@ -481,28 +481,16 @@ config ARCH_STRICT_ALIGN to run kernel only on systems with h/w unaligned access support in order to optimise for performance. -config KEXEC - bool "Kexec system call" - select KEXEC_CORE - help - kexec is a system call that implements the ability to shutdown your - current kernel, and to start another kernel. It is like a reboot - but it is independent of the system firmware. And like a reboot - you can start any kernel with it, not just Linux. +config ARCH_SUPPORTS_KEXEC + def_bool y - The name comes from the similarity to the exec system call. +config ARCH_SUPPORTS_CRASH_DUMP + def_bool y -config CRASH_DUMP - bool "Build kdump crash kernel" +config ARCH_SELECTS_CRASH_DUMP + def_bool y + depends on CRASH_DUMP select RELOCATABLE - help - Generate crash dump after being started by kexec. This should - be normally only set in special crash dump kernels which are - loaded in the main kernel with kexec-tools into a specially - reserved region and then later executed after a crash by - kdump/kexec. - - For more details see Documentation/admin-guide/kdump/kdump.rst config RELOCATABLE bool "Relocatable kernel"
Signature · 1 line
2.31.1
PATCH v3 5/13 arm64/kexec: refactor for kernel/Kconfig.kexec
In reply to Eric DeVolderThe kexec and crash kernel options are provided in the common kernel/Kconfig.kexec. Utilize the common options and provide the ARCH_SUPPORTS_ and ARCH_SELECTS_ entries to recreate the equivalent set of KEXEC and CRASH options.
--- arch/arm64/Kconfig | 62 +++++++++------------------------------------- 1 file changed, 12 insertions(+), 50 deletions(-)
arch/arm64/Kconfig +12 -50
@@ -1433,60 +1433,22 @@ config PARAVIRT_TIME_ACCOUNTING If in doubt, say N here. -config KEXEC - depends on PM_SLEEP_SMP - select KEXEC_CORE - bool "kexec system call" - help - kexec is a system call that implements the ability to shutdown your - current kernel, and to start another kernel. It is like a reboot - but it is independent of the system firmware. And like a reboot - you can start any kernel with it, not just Linux. - -config KEXEC_FILE - bool "kexec file based system call" - select KEXEC_CORE - select HAVE_IMA_KEXEC if IMA - help - This is new version of kexec system call. This system call is - file based and takes file descriptors as system call argument - for kernel and initramfs as opposed to list of segments as - accepted by previous system call. - -config KEXEC_SIG - bool "Verify kernel signature during kexec_file_load() syscall" - depends on KEXEC_FILE - help - Select this option to verify a signature with loaded kernel - image. If configured, any attempt of loading a image without - valid signature will fail. - - In addition to that option, you need to enable signature - verification for the corresponding kernel image type being - loaded in order for this to work. +config ARCH_SUPPORTS_KEXEC + def_bool PM_SLEEP_SMP -config KEXEC_IMAGE_VERIFY_SIG - bool "Enable Image signature verification support" - default y - depends on KEXEC_SIG - depends on EFI && SIGNED_PE_FILE_VERIFICATION - help - Enable Image signature verification support. +config ARCH_SUPPORTS_KEXEC_FILE + def_bool y -comment "Support for PE file signature verification disabled" - depends on KEXEC_SIG - depends on !EFI || !SIGNED_PE_FILE_VERIFICATION +config ARCH_SELECTS_KEXEC_FILE + def_bool y + depends on KEXEC_FILE + select HAVE_IMA_KEXEC if IMA -config CRASH_DUMP - bool "Build kdump crash kernel" - help - Generate crash dump after being started by kexec. This should - be normally only set in special crash dump kernels which are - loaded in the main kernel with kexec-tools into a specially - reserved region and then later executed after a crash by - kdump/kexec. +config ARCH_DEFAULT_KEXEC_IMAGE_VERIFY_SIG + def_bool y - For more details see Documentation/admin-guide/kdump/kdump.rst +config ARCH_SUPPORTS_CRASH_DUMP + def_bool y config TRANS_TABLE def_bool y
Signature · 1 line
2.31.1
PATCH v3 7/13 m68k/kexec: refactor for kernel/Kconfig.kexec
In reply to Eric DeVolderThe kexec and crash kernel options are provided in the common kernel/Kconfig.kexec. Utilize the common options and provide the ARCH_SUPPORTS_ and ARCH_SELECTS_ entries to recreate the equivalent set of KEXEC and CRASH options.
--- arch/m68k/Kconfig | 19 ++----------------- 1 file changed, 2 insertions(+), 17 deletions(-)
arch/m68k/Kconfig +2 -17
@@ -88,23 +88,8 @@ config MMU_SUN3 bool depends on MMU && !MMU_MOTOROLA && !MMU_COLDFIRE -config KEXEC - bool "kexec system call" - depends on M68KCLASSIC && MMU - select KEXEC_CORE - help - kexec is a system call that implements the ability to shutdown your - current kernel, and to start another kernel. It is like a reboot - but it is independent of the system firmware. And like a reboot - you can start any kernel with it, not just Linux. - - The name comes from the similarity to the exec system call. - - It is an ongoing process to be certain the hardware in a machine - is properly shutdown, so do not be surprised if this code does not - initially work for you. As of this writing the exact hardware - interface is strongly in flux, so no good recommendation can be - made. +config ARCH_SUPPORTS_KEXEC + def_bool M68KCLASSIC && MMU config BOOTINFO_PROC bool "Export bootinfo in procfs"
Signature · 1 line
2.31.1
PATCH v3 9/13 parisc/kexec: refactor for kernel/Kconfig.kexec
In reply to Eric DeVolderThe kexec and crash kernel options are provided in the common kernel/Kconfig.kexec. Utilize the common options and provide the ARCH_SUPPORTS_ and ARCH_SELECTS_ entries to recreate the equivalent set of KEXEC and CRASH options.
--- arch/parisc/Kconfig | 34 +++++++++++----------------------- 1 file changed, 11 insertions(+), 23 deletions(-)
arch/parisc/Kconfig +11 -23
@@ -348,29 +348,17 @@ config NR_CPUS default "4" if 64BIT default "16" -config KEXEC - bool "Kexec system call" - select KEXEC_CORE - help - kexec is a system call that implements the ability to shutdown your - current kernel, and to start another kernel. It is like a reboot - but it is independent of the system firmware. And like a reboot - you can start any kernel with it, not just Linux. - - It is an ongoing process to be certain the hardware in a machine - shutdown, so do not be surprised if this code does not - initially work for you. - -config KEXEC_FILE - bool "kexec file based system call" - select KEXEC_CORE - select KEXEC_ELF - help - This enables the kexec_file_load() System call. This is - file based and takes file descriptors as system call argument - for kernel and initramfs as opposed to list of segments as - accepted by previous system call. - endmenu +config ARCH_SUPPORTS_KEXEC + def_bool y + +config ARCH_SUPPORTS_KEXEC_FILE + def_bool y + +config ARCH_SELECTS_KEXEC_FILE + def_bool y + depends on KEXEC_FILE + select KEXEC_ELF + source "drivers/parisc/Kconfig"
Signature · 1 line
2.31.1
PATCH v3 8/13 mips/kexec: refactor for kernel/Kconfig.kexec
In reply to Eric DeVolderThe kexec and crash kernel options are provided in the common kernel/Kconfig.kexec. Utilize the common options and provide the ARCH_SUPPORTS_ and ARCH_SELECTS_ entries to recreate the equivalent set of KEXEC and CRASH options.
--- arch/mips/Kconfig | 32 +++++--------------------------- 1 file changed, 5 insertions(+), 27 deletions(-)
arch/mips/Kconfig +5 -27
@@ -2873,33 +2873,11 @@ config HZ config SCHED_HRTICK def_bool HIGH_RES_TIMERS -config KEXEC - bool "Kexec system call" - select KEXEC_CORE - help - kexec is a system call that implements the ability to shutdown your - current kernel, and to start another kernel. It is like a reboot - but it is independent of the system firmware. And like a reboot - you can start any kernel with it, not just Linux. - - The name comes from the similarity to the exec system call. - - It is an ongoing process to be certain the hardware in a machine - is properly shutdown, so do not be surprised if this code does not - initially work for you. As of this writing the exact hardware - interface is strongly in flux, so no good recommendation can be - made. - -config CRASH_DUMP - bool "Kernel crash dumps" - help - Generate crash dump after being started by kexec. - This should be normally only set in special crash dump kernels - which are loaded in the main kernel with kexec-tools into - a specially reserved region and then later executed after - a crash by kdump/kexec. The crash dump kernel must be compiled - to a memory address not used by the main kernel or firmware using - PHYSICAL_START. +config ARCH_SUPPORTS_KEXEC + def_bool y + +config ARCH_SUPPORTS_CRASH_DUMP + def_bool y config PHYSICAL_START hex "Physical address where the kernel is loaded"
Signature · 1 line
2.31.1
PATCH v3 10/13 powerpc/kexec: refactor for kernel/Kconfig.kexec
In reply to Eric DeVolderThe kexec and crash kernel options are provided in the common kernel/Kconfig.kexec. Utilize the common options and provide the ARCH_SUPPORTS_ and ARCH_SELECTS_ entries to recreate the equivalent set of KEXEC and CRASH options.
--- arch/powerpc/Kconfig | 55 ++++++++++++++------------------------------ 1 file changed, 17 insertions(+), 38 deletions(-)
arch/powerpc/Kconfig +17 -38
@@ -588,41 +588,21 @@ config PPC64_SUPPORTS_MEMORY_FAILURE default "y" if PPC_POWERNV select ARCH_SUPPORTS_MEMORY_FAILURE -config KEXEC - bool "kexec system call" - depends on PPC_BOOK3S || PPC_E500 || (44x && !SMP) - select KEXEC_CORE - help - kexec is a system call that implements the ability to shutdown your - current kernel, and to start another kernel. It is like a reboot - but it is independent of the system firmware. And like a reboot - you can start any kernel with it, not just Linux. - - The name comes from the similarity to the exec system call. - - It is an ongoing process to be certain the hardware in a machine - is properly shutdown, so do not be surprised if this code does not - initially work for you. As of this writing the exact hardware - interface is strongly in flux, so no good recommendation can be - made. - -config KEXEC_FILE - bool "kexec file based system call" - select KEXEC_CORE - select HAVE_IMA_KEXEC if IMA - select KEXEC_ELF - depends on PPC64 - depends on CRYPTO=y - depends on CRYPTO_SHA256=y - help - This is a new version of the kexec system call. This call is - file based and takes in file descriptors as system call arguments - for kernel and initramfs as opposed to a list of segments as is the - case for the older kexec call. +config ARCH_SUPPORTS_KEXEC + def_bool PPC_BOOK3S || PPC_E500 || (44x && !SMP) + +config ARCH_SUPPORTS_KEXEC_FILE + def_bool PPC64 && CRYPTO=y && CRYPTO_SHA256=y config ARCH_HAS_KEXEC_PURGATORY def_bool KEXEC_FILE +config ARCH_SELECTS_KEXEC_FILE + def_bool y + depends on KEXEC_FILE + select KEXEC_ELF + select HAVE_IMA_KEXEC if IMA + config PPC64_BIG_ENDIAN_ELF_ABI_V2 bool "Build big-endian kernel using ELF ABI V2 (EXPERIMENTAL)" depends on PPC64 && CPU_BIG_ENDIAN
@@ -682,14 +662,13 @@ config RELOCATABLE_TEST loaded at, which tends to be non-zero and therefore test the relocation code. -config CRASH_DUMP - bool "Build a dump capture kernel" - depends on PPC64 || PPC_BOOK3S_32 || PPC_85xx || (44x && !SMP) +config ARCH_SUPPORTS_CRASH_DUMP + def_bool PPC64 || PPC_BOOK3S_32 || PPC_85xx || (44x && !SMP) + +config ARCH_SELECTS_CRASH_DUMP + def_bool y + depends on CRASH_DUMP select RELOCATABLE if PPC64 || 44x || PPC_85xx - help - Build a kernel suitable for use as a dump capture kernel. - The same kernel binary can be used as production kernel and dump - capture kernel. config FA_DUMP bool "Firmware-assisted dump"
Signature · 1 line
2.31.1
PATCH v3 11/13 riscv/kexec: refactor for kernel/Kconfig.kexec
In reply to Eric DeVolderThe kexec and crash kernel options are provided in the common kernel/Kconfig.kexec. Utilize the common options and provide the ARCH_SUPPORTS_ and ARCH_SELECTS_ entries to recreate the equivalent set of KEXEC and CRASH options.
--- arch/riscv/Kconfig | 48 ++++++++++++++-------------------------------- 1 file changed, 14 insertions(+), 34 deletions(-)
arch/riscv/Kconfig +14 -34
@@ -585,48 +585,28 @@ config RISCV_BOOT_SPINWAIT If unsure what to do here, say N. -config KEXEC - bool "Kexec system call" - depends on MMU +config ARCH_SUPPORTS_KEXEC + def_bool MMU + +config ARCH_SELECTS_KEXEC + def_bool y + depends on KEXEC select HOTPLUG_CPU if SMP - select KEXEC_CORE - help - kexec is a system call that implements the ability to shutdown your - current kernel, and to start another kernel. It is like a reboot - but it is independent of the system firmware. And like a reboot - you can start any kernel with it, not just Linux. - The name comes from the similarity to the exec system call. +config ARCH_SUPPORTS_KEXEC_FILE + def_bool 64BIT && MMU && CRYPTO=y && CRYPTO_SHA256=y -config KEXEC_FILE - bool "kexec file based systmem call" - depends on 64BIT && MMU - select HAVE_IMA_KEXEC if IMA - select KEXEC_CORE +config ARCH_SELECTS_KEXEC_FILE + def_bool y + depends on KEXEC_FILE select KEXEC_ELF - help - This is new version of kexec system call. This system call is - file based and takes file descriptors as system call argument - for kernel and initramfs as opposed to list of segments as - accepted by previous system call. - - If you don't know what to do here, say Y. + select HAVE_IMA_KEXEC if IMA config ARCH_HAS_KEXEC_PURGATORY def_bool KEXEC_FILE - depends on CRYPTO=y - depends on CRYPTO_SHA256=y -config CRASH_DUMP - bool "Build kdump crash kernel" - help - Generate crash dump after being started by kexec. This should - be normally only set in special crash dump kernels which are - loaded in the main kernel with kexec-tools into a specially - reserved region and then later executed after a crash by - kdump/kexec. - - For more details see Documentation/admin-guide/kdump/kdump.rst +config ARCH_SUPPORTS_CRASH_DUMP + def_bool y config COMPAT bool "Kernel support for 32-bit U-mode"
Signature · 1 line
2.31.1
PATCH v3 12/13 s390/kexec: refactor for kernel/Kconfig.kexec
In reply to Eric DeVolderThe kexec and crash kernel options are provided in the common kernel/Kconfig.kexec. Utilize the common options and provide the ARCH_SUPPORTS_ and ARCH_SELECTS_ entries to recreate the equivalent set of KEXEC and CRASH options.
NOTE: The original Kconfig has a KEXEC_SIG which depends on MODULE_SIG_FORMAT. However, attempts to keep the MODULE_SIG_FORMAT dependency (using the strategy outlined in this series, and other techniques) results in 'error: recursive dependency detected' on CRYPTO.
Per Alexander Gordeev <[email protected]>: "the MODULE_SIG_FORMAT dependency was introduced with [git commit below] and in fact was not necessary, since s390 did/does not use mod_check_sig() anyway.
commit c8424e776b09 ("MODSIGN: Export module signature definitions")
MODULE_SIG_FORMAT is needed to select SYSTEM_DATA_VERIFICATION. But SYSTEM_DATA_VERIFICATION is also selected by FS_VERITY*, so dropping MODULE_SIG_FORMAT does not hurt."
Therefore, the solution is to drop the MODULE_SIG_FORMAT dependency from KEXEC_SIG. Still results in equivalent .config files for s390.
--- arch/s390/Kconfig | 65 ++++++++++++++--------------------------------- 1 file changed, 19 insertions(+), 46 deletions(-)
arch/s390/Kconfig +19 -46
@@ -243,6 +243,25 @@ config PGTABLE_LEVELS source "kernel/livepatch/Kconfig" +config ARCH_DEFAULT_KEXEC + def_bool y + +config ARCH_SUPPORTS_KEXEC + def_bool y + +config ARCH_SUPPORTS_KEXEC_FILE + def_bool CRYPTO && CRYPTO_SHA256 && CRYPTO_SHA256_S390 + +config ARCH_HAS_KEXEC_PURGATORY + def_bool KEXEC_FILE + +config ARCH_SUPPORTS_CRASH_DUMP + def_bool y + help + Refer to <file:Documentation/s390/zfcpdump.rst> for more details on this. + This option also enables s390 zfcpdump. + See also <file:Documentation/s390/zfcpdump.rst> + menu "Processor type and features" config HAVE_MARCH_Z10_FEATURES
@@ -481,36 +500,6 @@ config SCHED_TOPOLOGY source "kernel/Kconfig.hz" -config KEXEC - def_bool y - select KEXEC_CORE - -config KEXEC_FILE - bool "kexec file based system call" - select KEXEC_CORE - depends on CRYPTO - depends on CRYPTO_SHA256 - depends on CRYPTO_SHA256_S390 - help - Enable the kexec file based system call. In contrast to the normal - kexec system call this system call takes file descriptors for the - kernel and initramfs as arguments. - -config ARCH_HAS_KEXEC_PURGATORY - def_bool y - depends on KEXEC_FILE - -config KEXEC_SIG - bool "Verify kernel signature during kexec_file_load() syscall" - depends on KEXEC_FILE && MODULE_SIG_FORMAT - help - This option makes kernel signature verification mandatory for - the kexec_file_load() syscall. - - In addition to that option, you need to enable signature - verification for the corresponding kernel image type being - loaded in order for this to work. - config KERNEL_NOBP def_bool n prompt "Enable modified branch prediction for the kernel by default"
@@ -732,22 +721,6 @@ config VFIO_AP endmenu -menu "Dump support" - -config CRASH_DUMP - bool "kernel crash dumps" - select KEXEC - help - Generate crash dump after being started by kexec. - Crash dump kernels are loaded in the main kernel with kexec-tools - into a specially reserved region and then later executed after - a crash by kdump/kexec. - Refer to <file:Documentation/s390/zfcpdump.rst> for more details on this. - This option also enables s390 zfcpdump. - See also <file:Documentation/s390/zfcpdump.rst> - -endmenu - config CCW def_bool y
Signature · 1 line
2.31.1
PATCH v3 13/13 sh/kexec: refactor for kernel/Kconfig.kexec
In reply to Eric DeVolderThe kexec and crash kernel options are provided in the common kernel/Kconfig.kexec. Utilize the common options and provide the ARCH_SUPPORTS_ and ARCH_SELECTS_ entries to recreate the equivalent set of KEXEC and CRASH options.
--- arch/sh/Kconfig | 46 ++++++++-------------------------------------- 1 file changed, 8 insertions(+), 38 deletions(-)
arch/sh/Kconfig +8 -38
@@ -546,44 +546,14 @@ menu "Kernel features" source "kernel/Kconfig.hz" -config KEXEC - bool "kexec system call (EXPERIMENTAL)" - depends on MMU - select KEXEC_CORE - help - kexec is a system call that implements the ability to shutdown your - current kernel, and to start another kernel. It is like a reboot - but it is independent of the system firmware. And like a reboot - you can start any kernel with it, not just Linux. - - The name comes from the similarity to the exec system call. - - It is an ongoing process to be certain the hardware in a machine - is properly shutdown, so do not be surprised if this code does not - initially work for you. As of this writing the exact hardware - interface is strongly in flux, so no good recommendation can be - made. - -config CRASH_DUMP - bool "kernel crash dumps (EXPERIMENTAL)" - depends on BROKEN_ON_SMP - help - Generate crash dump after being started by kexec. - This should be normally only set in special crash dump kernels - which are loaded in the main kernel with kexec-tools into - a specially reserved region and then later executed after - a crash by kdump/kexec. The crash dump kernel must be compiled - to a memory address not used by the main kernel using - PHYSICAL_START. - - For more details see Documentation/admin-guide/kdump/kdump.rst - -config KEXEC_JUMP - bool "kexec jump (EXPERIMENTAL)" - depends on KEXEC && HIBERNATION - help - Jump between original kernel and kexeced kernel and invoke - code via KEXEC +config ARCH_SUPPORTS_KEXEC + def_bool MMU + +config ARCH_SUPPORTS_CRASH_DUMP + def_bool BROKEN_ON_SMP + +config ARCH_SUPPORTS_KEXEC_JUMP + def_bool y config PHYSICAL_START hex "Physical address where the kernel is loaded" if (EXPERT || CRASH_DUMP)
Signature · 1 line
2.31.1
Russell King (Oracle)
maintainerRe: [PATCH v3 01/13] kexec: consolidate kexec and crash options into kernel/Kconfig.kexec
In reply to Eric DeVolderQuoted 8 lines · Eric DeVolder
kernel/Kconfig.kexec new file +8
-0+config KEXEC + bool "Enable kexec system call" + default ARCH_DEFAULT_KEXEC + depends on ARCH_SUPPORTS_KEXEC + select KEXEC_CORE + help + kexec is a system call that implements the ability to shutdown your + current kernel, and to start another kernel. It is like a reboot
kernel/Kconfig.kexec line 35
Quoted 10 lines
kernel/Kconfig.kexec new file +10
-0+ but it is independent of the system firmware. And like a reboot + you can start any kernel with it, not just Linux. + + The name comes from the similarity to the exec system call. + + It is an ongoing process to be certain the hardware in a machine + is properly shutdown, so do not be surprised if this code does not + initially work for you. As of this writing the exact hardware + interface is strongly in flux, so no good recommendation can be + made.
Is this last paragraph still true? Is the hardware interface still "strongly in flux" ?
Signature · 7 lines
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last! _______________________________________________ linux-riscv mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-riscv
Re: [PATCH v3 01/13] kexec: consolidate kexec and crash options into kernel/Kconfig.kexec
Quoted 14 lines · Russell King (Oracle)
Quoted 13 lines · Eric DeVolder
kernel/Kconfig.kexec new file +13
-0+config KEXEC + bool "Enable kexec system call" + default ARCH_DEFAULT_KEXEC + depends on ARCH_SUPPORTS_KEXEC + select KEXEC_CORE + help + kexec is a system call that implements the ability to shutdown your + current kernel, and to start another kernel. It is like a reboot + but it is independent of the system firmware. And like a reboot + you can start any kernel with it, not just Linux. + + The name comes from the similarity to the exec system call. +
Quoted 9 lines
kernel/Kconfig.kexec line 35
Quoted 5 lines
kernel/Kconfig.kexec new file +5
-0+ It is an ongoing process to be certain the hardware in a machine + is properly shutdown, so do not be surprised if this code does not + initially work for you. As of this writing the exact hardware + interface is strongly in flux, so no good recommendation can be + made.Is this last paragraph still true? Is the hardware interface still "strongly in flux" ?
Russell,
In short, I don't know. Specifically with respect to the verbage you point out, it was present in most of the original Kconfig descriptions. Some archs are probably in better shape than others, but overall I've always see people issue caution statements around kexec/kdump.
$0.02
eric
Re: [PATCH v3 11/13] riscv/kexec: refactor for kernel/Kconfig.kexec
In reply to Eric DeVolderHey Eric,
Quoted 5 lines · Eric DeVolder
The kexec and crash kernel options are provided in the common
kernel/Kconfig.kexec. Utilize the common options and provide theARCH_SUPPORTS_andARCH_SELECTS_entries to recreate theequivalent set of KEXEC and CRASH options.
I find this diff a little hard to follow (since the other half off the change is in another patch), so it may be me missing something, but are you sure?
Quoted 24 lines
Signed-off-by Eric DeVolder <[email protected]>--- arch/riscv/Kconfig | 48 ++++++++++++++-------------------------------- 1 file changed, 14 insertions(+), 34 deletions(-)arch/riscv/Kconfig +6
-3@@ -585,48 +585,28 @@ config RISCV_BOOT_SPINWAIT If unsure what to do here, say N. -config KEXEC - bool "Kexec system call" - depends on MMU +config ARCH_SUPPORTS_KEXEC + def_bool MMU + +config ARCH_SELECTS_KEXEC + def_bool y + depends on KEXEC select HOTPLUG_CPU if SMP
arch/riscv/Kconfig config RISCV_BOOT_SPINWAIT · line 597
Quoted 10 lines
arch/riscv/Kconfig +2
-7- select KEXEC_CORE - help - kexec is a system call that implements the ability to shutdown your - current kernel, and to start another kernel. It is like a reboot - but it is independent of the system firmware. And like a reboot - you can start any kernel with it, not just Linux. - The name comes from the similarity to the exec system call. +config ARCH_SUPPORTS_KEXEC_FILE + def_bool 64BIT && MMU && CRYPTO=y && CRYPTO_SHA256=y
This looks like a change to me. Previously, only KEXEC_PURGATORY required these crypto options to be like so, but now KEXEC_FILE needs them too.
What am I missing?
Cheers,
Conor.
Quoted 42 lines
arch/riscv/Kconfig +6
-24-config KEXEC_FILE - bool "kexec file based systmem call" - depends on 64BIT && MMU - select HAVE_IMA_KEXEC if IMA - select KEXEC_CORE +config ARCH_SELECTS_KEXEC_FILE + def_bool y + depends on KEXEC_FILE select KEXEC_ELF - help - This is new version of kexec system call. This system call is - file based and takes file descriptors as system call argument - for kernel and initramfs as opposed to list of segments as - accepted by previous system call. - - If you don't know what to do here, say Y. + select HAVE_IMA_KEXEC if IMA config ARCH_HAS_KEXEC_PURGATORY def_bool KEXEC_FILE - depends on CRYPTO=y - depends on CRYPTO_SHA256=y -config CRASH_DUMP - bool "Build kdump crash kernel" - help - Generate crash dump after being started by kexec. This should - be normally only set in special crash dump kernels which are - loaded in the main kernel with kexec-tools into a specially - reserved region and then later executed after a crash by - kdump/kexec. - - For more details see Documentation/admin-guide/kdump/kdump.rst +config ARCH_SUPPORTS_CRASH_DUMP + def_bool y config COMPAT bool "Kernel support for 32-bit U-mode"Signature · 1 line
2.31.1
Re: [PATCH v3 11/13] riscv/kexec: refactor for kernel/Kconfig.kexec
Quoted 52 lines · Conor Dooley
Hey Eric,
Quoted 5 lines · Eric DeVolder
The kexec and crash kernel options are provided in the common
kernel/Kconfig.kexec. Utilize the common options and provide theARCH_SUPPORTS_andARCH_SELECTS_entries to recreate theequivalent set of KEXEC and CRASH options.
I find this diff a little hard to follow (since the other half off the change is in another patch), so it may be me missing something, but are you sure?
Quoted 24 lines
Signed-off-by Eric DeVolder <[email protected]>--- arch/riscv/Kconfig | 48 ++++++++++++++-------------------------------- 1 file changed, 14 insertions(+), 34 deletions(-)arch/riscv/Kconfig +6
-3@@ -585,48 +585,28 @@ config RISCV_BOOT_SPINWAIT If unsure what to do here, say N. -config KEXEC - bool "Kexec system call" - depends on MMU +config ARCH_SUPPORTS_KEXEC + def_bool MMU + +config ARCH_SELECTS_KEXEC + def_bool y + depends on KEXEC select HOTPLUG_CPU if SMParch/riscv/Kconfig config RISCV_BOOT_SPINWAIT · line 597
Quoted 10 lines
arch/riscv/Kconfig +2
-7- select KEXEC_CORE - help - kexec is a system call that implements the ability to shutdown your - current kernel, and to start another kernel. It is like a reboot - but it is independent of the system firmware. And like a reboot - you can start any kernel with it, not just Linux. - The name comes from the similarity to the exec system call. +config ARCH_SUPPORTS_KEXEC_FILE + def_bool 64BIT && MMU && CRYPTO=y && CRYPTO_SHA256=yThis looks like a change to me. Previously, only
KEXEC_PURGATORYrequired these crypto options to be like so, but nowKEXEC_FILEneeds them too.
Quoted 1 line
What am I missing?
Conor,
Thanks for looking at this! Indeed I erroneously applied the CRYPTO=y && CRYPTO_SHA256=y to KEXEC_FILE rather than PURGATORY. I will correct for v4!
Thanks!
eric
Quoted 46 lines
Cheers,
Conor.Quoted 42 lines
arch/riscv/Kconfig +6
-24-config KEXEC_FILE - bool "kexec file based systmem call" - depends on 64BIT && MMU - select HAVE_IMA_KEXEC if IMA - select KEXEC_CORE +config ARCH_SELECTS_KEXEC_FILE + def_bool y + depends on KEXEC_FILE select KEXEC_ELF - help - This is new version of kexec system call. This system call is - file based and takes file descriptors as system call argument - for kernel and initramfs as opposed to list of segments as - accepted by previous system call. - - If you don't know what to do here, say Y. + select HAVE_IMA_KEXEC if IMA config ARCH_HAS_KEXEC_PURGATORY def_bool KEXEC_FILE - depends on CRYPTO=y - depends on CRYPTO_SHA256=y -config CRASH_DUMP - bool "Build kdump crash kernel" - help - Generate crash dump after being started by kexec. This should - be normally only set in special crash dump kernels which are - loaded in the main kernel with kexec-tools into a specially - reserved region and then later executed after a crash by - kdump/kexec. - - For more details see Documentation/admin-guide/kdump/kdump.rst +config ARCH_SUPPORTS_CRASH_DUMP + def_bool y config COMPAT bool "Kernel support for 32-bit U-mode"Signature · 1 line
2.31.1
Re: [PATCH v3 12/13] s390/kexec: refactor for kernel/Kconfig.kexec
In reply to Eric DeVolderQuoted 108 lines · Eric DeVolder
The kexec and crash kernel options are provided in the common
kernel/Kconfig.kexec. Utilize the common options and provide theARCH_SUPPORTS_andARCH_SELECTS_entries to recreate the equivalent set of KEXEC and CRASH options.NOTE: The original
Kconfighas aKEXEC_SIGwhich depends onMODULE_SIG_FORMAT. However, attempts to keep theMODULE_SIG_FORMATdependency (using the strategy outlined in this series, and other techniques) results in 'error: recursive dependency detected' on CRYPTO.Per Alexander Gordeev <[email protected]>: "the
MODULE_SIG_FORMATdependency was introduced with [git commit below] and in fact was not necessary, since s390 did/does not usemod_check_sig()anyway.commit
c8424e776b09("MODSIGN: Export module signature definitions")
MODULE_SIG_FORMATis needed to selectSYSTEM_DATA_VERIFICATION. ButSYSTEM_DATA_VERIFICATIONis also selected by FS_VERITY*, so droppingMODULE_SIG_FORMATdoes not hurt."Therefore, the solution is to drop the
MODULE_SIG_FORMATdependency fromKEXEC_SIG. Still results in equivalent .config files for s390.Signed-off-by Eric DeVolder <[email protected]>--- arch/s390/Kconfig | 65 ++++++++++++++--------------------------------- 1 file changed, 19 insertions(+), 46 deletions(-)arch/s390/Kconfig +19
-38@@ -243,6 +243,25 @@ config PGTABLE_LEVELS source "kernel/livepatch/Kconfig" +config ARCH_DEFAULT_KEXEC + def_bool y + +config ARCH_SUPPORTS_KEXEC + def_bool y + +config ARCH_SUPPORTS_KEXEC_FILE + def_bool CRYPTO && CRYPTO_SHA256 && CRYPTO_SHA256_S390 + +config ARCH_HAS_KEXEC_PURGATORY + def_bool KEXEC_FILE + +config ARCH_SUPPORTS_CRASH_DUMP + def_bool y + help + Refer to <file:Documentation/s390/zfcpdump.rst> for more details on this. + This option also enables s390 zfcpdump. + See also <file:Documentation/s390/zfcpdump.rst> + menu "Processor type and features" config HAVE_MARCH_Z10_FEATURES@@ -481,36 +500,6 @@ config SCHED_TOPOLOGY source "kernel/Kconfig.hz" -config KEXEC - def_bool y - select KEXEC_CORE - -config KEXEC_FILE - bool "kexec file based system call" - select KEXEC_CORE - depends on CRYPTO - depends on CRYPTO_SHA256 - depends on CRYPTO_SHA256_S390 - help - Enable the kexec file based system call. In contrast to the normal - kexec system call this system call takes file descriptors for the - kernel and initramfs as arguments. - -config ARCH_HAS_KEXEC_PURGATORY - def_bool y - depends on KEXEC_FILE - -config KEXEC_SIG - bool "Verify kernel signature during kexec_file_load() syscall" - depends on KEXEC_FILE && MODULE_SIG_FORMAT - help - This option makes kernel signature verification mandatory for - the kexec_file_load() syscall. - - In addition to that option, you need to enable signature - verification for the corresponding kernel image type being - loaded in order for this to work. - config KERNEL_NOBP def_bool n prompt "Enable modified branch prediction for the kernel by default"@@ -732,22 +721,6 @@ config VFIO_AP endmenu -menu "Dump support" - -config CRASH_DUMP - bool "kernel crash dumps" - select KEXEC - help - Generate crash dump after being started by kexec. - Crash dump kernels are loaded in the main kernel with kexec-tools
arch/s390/Kconfig config VFIO_AP · line 725
Quoted 10 lines
arch/s390/Kconfig +0
-8- into a specially reserved region and then later executed after - a crash by kdump/kexec. - Refer to <file:Documentation/s390/zfcpdump.rst> for more details on this. - This option also enables s390 zfcpdump. - See also <file:Documentation/s390/zfcpdump.rst> - -endmenu - config CCW def_bool y
Re: [PATCH v3 12/13] s390/kexec: refactor for kernel/Kconfig.kexec
Quoted 113 lines · Alexander Gordeev
Quoted 112 lines · Eric DeVolder
The kexec and crash kernel options are provided in the common
kernel/Kconfig.kexec. Utilize the common options and provide theARCH_SUPPORTS_andARCH_SELECTS_entries to recreate the equivalent set of KEXEC and CRASH options.NOTE: The original
Kconfighas aKEXEC_SIGwhich depends onMODULE_SIG_FORMAT. However, attempts to keep theMODULE_SIG_FORMATdependency (using the strategy outlined in this series, and other techniques) results in 'error: recursive dependency detected' on CRYPTO.Per Alexander Gordeev <[email protected]>: "the
MODULE_SIG_FORMATdependency was introduced with [git commit below] and in fact was not necessary, since s390 did/does not usemod_check_sig()anyway.commit
c8424e776b09("MODSIGN: Export module signature definitions")
MODULE_SIG_FORMATis needed to selectSYSTEM_DATA_VERIFICATION. ButSYSTEM_DATA_VERIFICATIONis also selected by FS_VERITY*, so droppingMODULE_SIG_FORMATdoes not hurt."Therefore, the solution is to drop the
MODULE_SIG_FORMATdependency fromKEXEC_SIG. Still results in equivalent .config files for s390.Signed-off-by Eric DeVolder <[email protected]>--- arch/s390/Kconfig | 65 ++++++++++++++--------------------------------- 1 file changed, 19 insertions(+), 46 deletions(-)arch/s390/Kconfig +19
-42@@ -243,6 +243,25 @@ config PGTABLE_LEVELS source "kernel/livepatch/Kconfig" +config ARCH_DEFAULT_KEXEC + def_bool y + +config ARCH_SUPPORTS_KEXEC + def_bool y + +config ARCH_SUPPORTS_KEXEC_FILE + def_bool CRYPTO && CRYPTO_SHA256 && CRYPTO_SHA256_S390 + +config ARCH_HAS_KEXEC_PURGATORY + def_bool KEXEC_FILE + +config ARCH_SUPPORTS_CRASH_DUMP + def_bool y + help + Refer to <file:Documentation/s390/zfcpdump.rst> for more details on this. + This option also enables s390 zfcpdump. + See also <file:Documentation/s390/zfcpdump.rst> + menu "Processor type and features" config HAVE_MARCH_Z10_FEATURES@@ -481,36 +500,6 @@ config SCHED_TOPOLOGY source "kernel/Kconfig.hz" -config KEXEC - def_bool y - select KEXEC_CORE - -config KEXEC_FILE - bool "kexec file based system call" - select KEXEC_CORE - depends on CRYPTO - depends on CRYPTO_SHA256 - depends on CRYPTO_SHA256_S390 - help - Enable the kexec file based system call. In contrast to the normal - kexec system call this system call takes file descriptors for the - kernel and initramfs as arguments. - -config ARCH_HAS_KEXEC_PURGATORY - def_bool y - depends on KEXEC_FILE - -config KEXEC_SIG - bool "Verify kernel signature during kexec_file_load() syscall" - depends on KEXEC_FILE && MODULE_SIG_FORMAT - help - This option makes kernel signature verification mandatory for - the kexec_file_load() syscall. - - In addition to that option, you need to enable signature - verification for the corresponding kernel image type being - loaded in order for this to work. - config KERNEL_NOBP def_bool n prompt "Enable modified branch prediction for the kernel by default"@@ -732,22 +721,6 @@ config VFIO_AP endmenu -menu "Dump support" - -config CRASH_DUMP - bool "kernel crash dumps" - select KEXEC - help - Generate crash dump after being started by kexec. - Crash dump kernels are loaded in the main kernel with kexec-tools - into a specially reserved region and then later executed after - a crash by kdump/kexec. - Refer to <file:Documentation/s390/zfcpdump.rst> for more details on this. - This option also enables s390 zfcpdump.
Quoted 8 lines
arch/s390/Kconfig config VFIO_AP · line 725
Quoted 6 lines
arch/s390/Kconfig +0
-4- See also <file:Documentation/s390/zfcpdump.rst> - -endmenu - config CCW def_bool y
Thank you Alexander!
eric
_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv