bootstd: USB devtype detection for script boot
PATCH 1/1 bootstd: USB devtype detection for script boot
Change the device type from "usb_mass_storage" to "usb" when booting a script.
Before this change:
=> printenv devtype
devtype=usb_mass_storage
After this change:
=> printenv devtype
devtype=usb
---
boot/bootmeth_script.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
boot/bootmeth_script.c +6 -2
@@ -187,10 +187,14 @@ static int script_set_bootflow(struct udevice *dev, struct bootflow *bflow,static int script_boot (struct udevice *dev,struct bootflow *bflow) {struct blk_desc *desc =dev_get_uclass_plat (bflow->blk); +const char *devtype =blk_get_devtype (bflow->blk);ulong addr;int ret; - ret =env_set ("devtype" ,blk_get_devtype (bflow->blk)); +if (!strcmp ("usb_mass_storage" , devtype)) + ret =env_set ("devtype" ,"usb" ); +else + ret =env_set ("devtype" , devtype);if (!ret) ret =env_set_hex ("devnum" , desc->devnum);if (!ret)
@@ -198,7 +202,7 @@ static int script_boot(struct udevice *dev, struct bootflow *bflow)if (!ret) ret =env_set ("prefix" , bflow->subdir);if (!ret &&IS_ENABLED (CONFIG_ARCH_SUNXI ) && - !strcmp ("mmc" ,blk_get_devtype (bflow->blk))) + !strcmp ("mmc" , devtype)) ret =env_set_hex ("mmc_bootdev" , desc->devnum);if (ret)return log_msg_ret ("env" , ret);
Signature · 1 line
2.39.2
Hi John,
Quoted 23 lines · John Clark
Change the device type from "
usb_mass_storage" to "usb" when booting a script.Before this change:
=> printenv devtype
devtype=usb_mass_storageAfter this change:
=> printenv devtype
devtype=usbSigned-off-by John Clark <[email protected]>---
boot/bootmeth_script.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)boot/bootmeth_script.c +0
-0
boot/bootmeth_script.c static int script_set_bootflow(struct udevice *dev, struct bootflow *bflow, · line 194
Quoted 9 lines
boot/bootmeth_script.c +2
-1@@ -187,10 +187,14 @@ static int script_set_bootflow(struct udevice *dev, struct bootflow *bflow,static int script_boot (struct udevice *dev,struct bootflow *bflow) {struct blk_desc *desc =dev_get_uclass_plat (bflow->blk); +const char *devtype =blk_get_devtype (bflow->blk);ulong addr;int ret; - ret =env_set ("devtype" ,blk_get_devtype (bflow->blk)); +if (!strcmp ("usb_mass_storage" , devtype))
I only just thought of this, but I think it is better to check blk->uclass_id == UCLASS_USB instead, since it avoids a string comparison.
Quoted 16 lines
boot/bootmeth_script.c +4
-2+ ret =env_set ("devtype" ,"usb" ); + else + ret =env_set ("devtype" , devtype);if (!ret) ret =env_set_hex ("devnum" , desc->devnum);if (!ret)@@ -198,7 +202,7 @@ static int script_boot(struct udevice *dev, struct bootflow *bflow)if (!ret) ret =env_set ("prefix" , bflow->subdir);if (!ret &&IS_ENABLED (CONFIG_ARCH_SUNXI ) && - !strcmp ("mmc" ,blk_get_devtype (bflow->blk))) + !strcmp ("mmc" , devtype)) ret =env_set_hex ("mmc_bootdev" , desc->devnum);if (ret)return log_msg_ret ("env" , ret); --
Quoted 2 lines
2.39.2
Regards,
Simon
Hi John,
Quoted 7 lines · John Clark
Quoted 2 lines
I only just thought of this, but I think it is better to check
blk->uclass_id==UCLASS_USBinstead, since it avoids a string comparison.I am not finding anything as direct as your pseudo code above suggests. The closest I can find is a compare like this:
Quoted 7 lines
UCLASS_MASS_STORAGE== device_get_uclass_id(dev_get_parent(bflow->blk))Which has the overhead of calling two new functions that otherwise would not be called and could match other mass storage devices other than USB (am I right to assume this?).
Can you shed additional insight into "
blk->uclass_id"?
Oh sorry, I mean the blk_desc structure attached to the block device.
struct blk_desc *desc = dev_get_uclass_plat(blk);
Then desc->uclass_id is what you want. It is the uclass of the media device (typically the parent of the block device).
Quoted 35 lines
blk is a udevice without a
uclass_idmember:
./dm/device.hstruct udevice { const struct driver *driver; const char *name; void *plat_; void *parent_plat_; void *uclass_plat_; ulong driver_data; struct udevice *parent; void *priv_; struct uclass *uclass; void *uclass_priv_; void *parent_priv_; struct list_head uclass_node; struct list_head child_head; struct list_head sibling_node; #if !CONFIG_IS_ENABLED(OF_PLATDATA_RT) u32 flags_; #endif int seq_; #if CONFIG_IS_ENABLED(OF_REAL) ofnode node_; #endif #if CONFIG_IS_ENABLED(DEVRES) struct list_head devres_head; #endif #if CONFIG_IS_ENABLED(DM_DMA) ulong dma_offset; #endif #if CONFIG_IS_ENABLED(IOMMU) struct udevice *iommu;
Quoted 2 lines
#endif
};
You can use device_get_uclass_id(blk) to get the uclass ID of the block device, but of course it will just be UCLASS_BLK.
Quoted 8 lines
I am not a prolific open source contributor, so I am not sure if a side-bar conversation like this is one we should be having with the whole list? Something this trivial seems like it would just be noise to include hundreds of people on.
I appreciate your advice here, and thanks for your time.
You can just copy the list on all emails. I've done it here.
Regards,
Simon
Quoted 64 lines
John Clark
Quoted 58 lines · Simon Glass
Hi John,
Quoted 22 lines · John Clark
Change the device type from "
usb_mass_storage" to "usb" when booting a script.Before this change:
=> printenv devtype
devtype=usb_mass_storageAfter this change:
=> printenv devtype
devtype=usbSigned-off-by John Clark <[email protected]>---
boot/bootmeth_script.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)boot/bootmeth_script.c +0
-0boot/bootmeth_script.c static int script_set_bootflow(struct udevice *dev, struct bootflow *bflow, · line 194
Quoted 9 lines
boot/bootmeth_script.c +2
-1@@ -187,10 +187,14 @@ static int script_set_bootflow(struct udevice *dev, struct bootflow *bflow,static int script_boot (struct udevice *dev,struct bootflow *bflow) {struct blk_desc *desc =dev_get_uclass_plat (bflow->blk); +const char *devtype =blk_get_devtype (bflow->blk);ulong addr;int ret; - ret =env_set ("devtype" ,blk_get_devtype (bflow->blk)); +if (!strcmp ("usb_mass_storage" , devtype))I only just thought of this, but I think it is better to check
blk->uclass_id==UCLASS_USBinstead, since it avoids a string comparison.Quoted 16 lines
boot/bootmeth_script.c +4
-2+ ret =env_set ("devtype" ,"usb" ); + else + ret =env_set ("devtype" , devtype);if (!ret) ret =env_set_hex ("devnum" , desc->devnum);if (!ret)@@ -198,7 +202,7 @@ static int script_boot(struct udevice *dev, struct bootflow *bflow)if (!ret) ret =env_set ("prefix" , bflow->subdir);if (!ret &&IS_ENABLED (CONFIG_ARCH_SUNXI ) && - !strcmp ("mmc" ,blk_get_devtype (bflow->blk))) + !strcmp ("mmc" , devtype)) ret =env_set_hex ("mmc_bootdev" , desc->devnum);if (ret)return log_msg_ret ("env" , ret); --Quoted 2 lines
2.39.2
Regards,
Simon