efi: Print EFI status as hex number instead of uint
PATCH v2 1/1 efi: Print EFI status as hex number instead of uint
EFI status codes are of different classes depending on the first byte and all error status codes defined in appendix D of the main spec start from 1 and have the high bit set. When printing as a uint, the decimal is a very large number that needs have the high bit cleared get the spec error code. This can be easily visually done by a human if the number is printed as hex.
--- grub-core/loader/efi/linux.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
grub-core/loader/efi/linux.c +1 -1
@@ -234,7 +234,7 @@ grub_arch_efi_linux_boot_image (grub_addr_t addr, grub_size_t size, char *args) status = b->start_image (image_handle,0 ,NULL );/* When successful, not reached */ -grub_error (GRUB_ERR_BAD_OS ,"start_image() returned %" PRIuGRUB_EFI_UINTN_T, status); +grub_error (GRUB_ERR_BAD_OS ,"start_image() returned 0x%" PRIxGRUB_EFI_UINTN_T, status);grub_efi_free_pages ((grub_addr_t ) loaded_image->load_options,GRUB_EFI_BYTES_TO_PAGES (loaded_image->load_options_size)); unload:
Signature · 1 line
2.34.1
Quoted 7 lines · Glenn Washburn
EFI status codes are of different classes depending on the first byte and all error status codes defined in appendix D of the main spec start from 1 and have the high bit set. When printing as a uint, the decimal is a very large number that needs have the high bit cleared get the spec error code. This can be easily visually done by a human if the number is printed as hex.
Signed-off-by Glenn Washburn <[email protected]>
Daniel