drm/nouveau/nvkm/dp: Add hack to fix DP 1.3+ DPCD issues
Subsystems (3)
Lyude Paul
maintainerPATCH 1/1 drm/nouveau/nvkm/dp: Add hack to fix DP 1.3+ DPCD issues
Currently we use the drm_dp_dpcd_read_caps() helper in the DRM side of nouveau in order to read the DPCD of a DP connector, which makes sure we do the right thing and also check for extended DPCD caps. However, it turns out we're not currently doing this on the nvkm side since we don't have access to the drm_dp_aux structure there - which means that the DRM side of the driver and the NVKM side can end up with different DPCD capabilities for the same connector.
Ideally to fix this, we want to start setting up the drm_dp_aux device in NVKM before we've made contact with the DRM side - which should be pretty easy to accomplish (I'm already working on it!). Until then however, let's workaround this problem by porting a copy of drm_dp_read_dpcd_caps() into NVKM - which should fix this issue.
Issue: https://gitlab.freedesktop.org/drm/nouveau/-/issues/211
--- drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c | 48 ++++++++++++++++++- 1 file changed, 47 insertions(+), 1 deletion(-)
drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c +47 -1
@@ -26,6 +26,8 @@#include "head.h" #include "ior.h" +#include <drm/display/drm_dp.h> +#include <subdev/bios.h> #include <subdev/bios/init.h> #include <subdev/gpio.h>
@@ -634,6 +636,50 @@ nvkm_dp_enable_supported_link_rates(struct nvkm_outp *outp)return outp->dp.rates !=0 ; } +/* XXX: This is a big fat hack, and this is just drm_dp_read_dpcd_caps() +* converted to work inside nvkm. This is a temporary holdover until we start +* passing the drm_dp_aux device through NVKM +*/ +static int +nvkm_dp_read_dpcd_caps (struct nvkm_outp *outp) +{ +struct nvkm_i2c_aux *aux = outp->dp.aux; +u8 dpcd_ext[DP_RECEIVER_CAP_SIZE ]; +int ret; + + ret =nvkm_rdaux (aux,DPCD_RC00_DPCD_REV , outp->dp.dpcd,DP_RECEIVER_CAP_SIZE ); +if (ret <0 ) +return ret; + +/* +* Prior to DP1.3 the bit represented by +* DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT was reserved. +* If it is set DP_DPCD_REV at 0000h could be at a value less than +* the true capability of the panel. The only way to check is to +* then compare 0000h and 2200h. +*/ +if (!(outp->dp.dpcd[DP_TRAINING_AUX_RD_INTERVAL ] & +DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT )) +return 0 ; + + ret =nvkm_rdaux (aux,DP_DP13_DPCD_REV , dpcd_ext,sizeof (dpcd_ext)); +if (ret <0 ) +return ret; + +if (outp->dp.dpcd[DP_DPCD_REV ] > dpcd_ext[DP_DPCD_REV ]) { +OUTP_DBG (outp,"Extended DPCD rev less than base DPCD rev (%d > %d)\n" , + outp->dp.dpcd[DP_DPCD_REV ], dpcd_ext[DP_DPCD_REV ]); +return 0 ; + } + +if (!memcmp (outp->dp.dpcd, dpcd_ext,sizeof (dpcd_ext))) +return 0 ; + +memcpy (outp->dp.dpcd, dpcd_ext,sizeof (dpcd_ext)); + +return 0 ; +} +void nvkm_dp_enable (struct nvkm_outp *outp,bool auxpwr) {
@@ -689,7 +735,7 @@ nvkm_dp_enable(struct nvkm_outp *outp, bool auxpwr)memset (outp->dp.lttpr,0x00 ,sizeof (outp->dp.lttpr)); } -if (!nvkm_rdaux (aux,DPCD_RC00_DPCD_REV , outp->dp.dpcd,sizeof (outp->dp.dpcd))) { +if (!nvkm_dp_read_dpcd_caps (outp)) {const u8 rates[] = {0x1e ,0x14 ,0x0a ,0x06 ,0 };const u8 *rate;int rate_max;
Signature · 1 line
2.40.1
Quoted 9 lines · Lyude Paul
Currently we use the
drm_dp_dpcd_read_caps()helper in the DRM side of nouveau in order to read the DPCD of a DP connector, which makes sure we do the right thing and also check for extended DPCD caps. However, it turns out we're not currently doing this on the nvkm side since we don't have access to thedrm_dp_auxstructure there - which means that the DRM side of the driver and the NVKM side can end up with different DPCD capabilities for the same connector.
Quoted 7 lines
Ideally to fix this, we want to start setting up the
drm_dp_auxdevice in NVKM before we've made contact with the DRM side - which should be pretty easy to accomplish (I'm already working on it!). Until then however, let's workaround this problem by porting a copy ofdrm_dp_read_dpcd_caps()into NVKM - which should fix this issue.Issue: https://gitlab.freedesktop.org/drm/nouveau/-/issues/211
Should a Fixes: or Cc: stable tag be added so it gets backported?
Quoted 19 lines
Signed-off-by Lyude Paul <[email protected]>--- drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c | 48 ++++++++++++++++++- 1 file changed, 47 insertions(+), 1 deletion(-)drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c +2
-0@@ -26,6 +26,8 @@#include "head.h" #include "ior.h" +#include <drm/display/drm_dp.h> +#include <subdev/bios.h> #include <subdev/bios/init.h> #include <subdev/gpio.h>
drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c nvkm_dp_enable_supported_link_rates(struct nvkm_outp *outp) · line 639
Quoted 4 lines
drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c +1
-0@@ -634,6 +636,50 @@ nvkm_dp_enable_supported_link_rates(struct nvkm_outp *outp)return outp->dp.rates !=0 ; } +/* XXX: This is a big fat hack, and this is just drm_dp_read_dpcd_caps()
Well.. maybe we should rephrase that _if_ we want to see it backported. But is this code really that bad? It kinda looks reasonable enough.
Quoted 58 lines
drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c +44
-2+* converted to work inside nvkm. This is a temporary holdover until we start +* passing the drm_dp_aux device through NVKM +*/ +static int +nvkm_dp_read_dpcd_caps (struct nvkm_outp *outp) +{ +struct nvkm_i2c_aux *aux = outp->dp.aux; +u8 dpcd_ext[DP_RECEIVER_CAP_SIZE ]; +int ret; + + ret =nvkm_rdaux (aux,DPCD_RC00_DPCD_REV , outp->dp.dpcd,DP_RECEIVER_CAP_SIZE ); +if (ret <0 ) +return ret; + +/* +* Prior to DP1.3 the bit represented by +* DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT was reserved. +* If it is set DP_DPCD_REV at 0000h could be at a value less than +* the true capability of the panel. The only way to check is to +* then compare 0000h and 2200h. +*/ +if (!(outp->dp.dpcd[DP_TRAINING_AUX_RD_INTERVAL ] & +DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT )) +return 0 ; + + ret =nvkm_rdaux (aux,DP_DP13_DPCD_REV , dpcd_ext,sizeof (dpcd_ext)); +if (ret <0 ) +return ret; + +if (outp->dp.dpcd[DP_DPCD_REV ] > dpcd_ext[DP_DPCD_REV ]) { +OUTP_DBG (outp,"Extended DPCD rev less than base DPCD rev (%d > %d)\n" , + outp->dp.dpcd[DP_DPCD_REV ], dpcd_ext[DP_DPCD_REV ]); +return 0 ; + } + +if (!memcmp (outp->dp.dpcd, dpcd_ext,sizeof (dpcd_ext))) +return 0 ; + +memcpy (outp->dp.dpcd, dpcd_ext,sizeof (dpcd_ext)); + +return 0 ; +} +void nvkm_dp_enable (struct nvkm_outp *outp,bool auxpwr) {@@ -689,7 +735,7 @@ nvkm_dp_enable(struct nvkm_outp *outp, bool auxpwr)memset (outp->dp.lttpr,0x00 ,sizeof (outp->dp.lttpr)); } -if (!nvkm_rdaux (aux,DPCD_RC00_DPCD_REV , outp->dp.dpcd,sizeof (outp->dp.dpcd))) { +if (!nvkm_dp_read_dpcd_caps (outp)) {const u8 rates[] = {0x1e ,0x14 ,0x0a ,0x06 ,0 };const u8 *rate;int rate_max; --2.40.1
Lyude Paul
maintainerQuoted 16 lines · Karol Herbst
Quoted 15 lines · Lyude Paul
Currently we use the
drm_dp_dpcd_read_caps()helper in the DRM side of nouveau in order to read the DPCD of a DP connector, which makes sure we do the right thing and also check for extended DPCD caps. However, it turns out we're not currently doing this on the nvkm side since we don't have access to thedrm_dp_auxstructure there - which means that the DRM side of the driver and the NVKM side can end up with different DPCD capabilities for the same connector.Ideally to fix this, we want to start setting up the
drm_dp_auxdevice in NVKM before we've made contact with the DRM side - which should be pretty easy to accomplish (I'm already working on it!). Until then however, let's workaround this problem by porting a copy ofdrm_dp_read_dpcd_caps()into NVKM - which should fix this issue.
Quoted 3 lines
Quoted 1 line
Issue: https://gitlab.freedesktop.org/drm/nouveau/-/issues/211
Should a Fixes: or Cc: stable tag be added so it gets backported?
JFYI I think not adding one is fine nowadays? The stable bot seems to be pretty good at catching anything with the words fix/fixes in it
Quoted 88 lines
Quoted 20 lines
Signed-off-by Lyude Paul <[email protected]>--- drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c | 48 ++++++++++++++++++- 1 file changed, 47 insertions(+), 1 deletion(-)drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c +2
-0@@ -26,6 +26,8 @@#include "head.h" #include "ior.h" +#include <drm/display/drm_dp.h> +#include <subdev/bios.h> #include <subdev/bios/init.h> #include <subdev/gpio.h> drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c nvkm_dp_enable_supported_link_rates(struct nvkm_outp *outp) · line 639
Quoted 4 lines
drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c +1
-0@@ -634,6 +636,50 @@ nvkm_dp_enable_supported_link_rates(struct nvkm_outp *outp)return outp->dp.rates !=0 ; } +/* XXX: This is a big fat hack, and this is just drm_dp_read_dpcd_caps() Well.. maybe we should rephrase that _if_ we want to see it backported. But is this code really that bad? It kinda looks reasonable enough.
Quoted 58 lines
drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c +44
-2+* converted to work inside nvkm. This is a temporary holdover until we start +* passing the drm_dp_aux device through NVKM +*/ +static int +nvkm_dp_read_dpcd_caps (struct nvkm_outp *outp) +{ +struct nvkm_i2c_aux *aux = outp->dp.aux; +u8 dpcd_ext[DP_RECEIVER_CAP_SIZE ]; +int ret; + + ret =nvkm_rdaux (aux,DPCD_RC00_DPCD_REV , outp->dp.dpcd,DP_RECEIVER_CAP_SIZE ); +if (ret <0 ) +return ret; + +/* +* Prior to DP1.3 the bit represented by +* DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT was reserved. +* If it is set DP_DPCD_REV at 0000h could be at a value less than +* the true capability of the panel. The only way to check is to +* then compare 0000h and 2200h. +*/ +if (!(outp->dp.dpcd[DP_TRAINING_AUX_RD_INTERVAL ] & +DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT )) +return 0 ; + + ret =nvkm_rdaux (aux,DP_DP13_DPCD_REV , dpcd_ext,sizeof (dpcd_ext)); +if (ret <0 ) +return ret; + +if (outp->dp.dpcd[DP_DPCD_REV ] > dpcd_ext[DP_DPCD_REV ]) { +OUTP_DBG (outp,"Extended DPCD rev less than base DPCD rev (%d > %d)\n" , + outp->dp.dpcd[DP_DPCD_REV ], dpcd_ext[DP_DPCD_REV ]); +return 0 ; + } + +if (!memcmp (outp->dp.dpcd, dpcd_ext,sizeof (dpcd_ext))) +return 0 ; + +memcpy (outp->dp.dpcd, dpcd_ext,sizeof (dpcd_ext)); + +return 0 ; +} +void nvkm_dp_enable (struct nvkm_outp *outp,bool auxpwr) {@@ -689,7 +735,7 @@ nvkm_dp_enable(struct nvkm_outp *outp, bool auxpwr)memset (outp->dp.lttpr,0x00 ,sizeof (outp->dp.lttpr)); } -if (!nvkm_rdaux (aux,DPCD_RC00_DPCD_REV , outp->dp.dpcd,sizeof (outp->dp.dpcd))) { +if (!nvkm_dp_read_dpcd_caps (outp)) {const u8 rates[] = {0x1e ,0x14 ,0x0a ,0x06 ,0 };const u8 *rate;int rate_max; --2.40.1
Signature · 3 lines
Cheers, Lyude Paul (she/her) Software Engineer at Red Hat
Quoted 18 lines · Lyude Paul
Quoted 16 lines · Karol Herbst
Quoted 15 lines · Lyude Paul
Currently we use the
drm_dp_dpcd_read_caps()helper in the DRM side of nouveau in order to read the DPCD of a DP connector, which makes sure we do the right thing and also check for extended DPCD caps. However, it turns out we're not currently doing this on the nvkm side since we don't have access to thedrm_dp_auxstructure there - which means that the DRM side of the driver and the NVKM side can end up with different DPCD capabilities for the same connector.Ideally to fix this, we want to start setting up the
drm_dp_auxdevice in NVKM before we've made contact with the DRM side - which should be pretty easy to accomplish (I'm already working on it!). Until then however, let's workaround this problem by porting a copy ofdrm_dp_read_dpcd_caps()into NVKM - which should fix this issue.
Quoted 7 lines
Quoted 3 lines
Quoted 1 line
Issue: https://gitlab.freedesktop.org/drm/nouveau/-/issues/211
Should a Fixes: or Cc: stable tag be added so it gets backported?
JFYI I think not adding one is fine nowadays? The stable bot seems to be pretty good at catching anything with the words fix/fixes in it
Yeah not sure.. I'd rather be specific and add it just to be sure. Anyway, it could also be done while pushing. I think the bigger question here was if this fix is good enough for stable or if you plan to rework it.
Quoted 94 lines
Quoted 79 lines
Quoted 20 lines
Signed-off-by Lyude Paul <[email protected]>--- drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c | 48 ++++++++++++++++++- 1 file changed, 47 insertions(+), 1 deletion(-)drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c +2
-0@@ -26,6 +26,8 @@#include "head.h" #include "ior.h" +#include <drm/display/drm_dp.h> +#include <subdev/bios.h> #include <subdev/bios/init.h> #include <subdev/gpio.h> drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c nvkm_dp_enable_supported_link_rates(struct nvkm_outp *outp) · line 639
Quoted 4 lines
drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c +1
-0@@ -634,6 +636,50 @@ nvkm_dp_enable_supported_link_rates(struct nvkm_outp *outp)return outp->dp.rates !=0 ; } +/* XXX: This is a big fat hack, and this is just drm_dp_read_dpcd_caps() Well.. maybe we should rephrase that _if_ we want to see it backported. But is this code really that bad? It kinda looks reasonable enough.
Quoted 50 lines
drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c +43
-0+* converted to work inside nvkm. This is a temporary holdover until we start +* passing the drm_dp_aux device through NVKM +*/ +static int +nvkm_dp_read_dpcd_caps (struct nvkm_outp *outp) +{ +struct nvkm_i2c_aux *aux = outp->dp.aux; +u8 dpcd_ext[DP_RECEIVER_CAP_SIZE ]; +int ret; + + ret =nvkm_rdaux (aux,DPCD_RC00_DPCD_REV , outp->dp.dpcd,DP_RECEIVER_CAP_SIZE ); +if (ret <0 ) +return ret; + +/* +* Prior to DP1.3 the bit represented by +* DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT was reserved. +* If it is set DP_DPCD_REV at 0000h could be at a value less than +* the true capability of the panel. The only way to check is to +* then compare 0000h and 2200h. +*/ +if (!(outp->dp.dpcd[DP_TRAINING_AUX_RD_INTERVAL ] & +DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT )) +return 0 ; + + ret =nvkm_rdaux (aux,DP_DP13_DPCD_REV , dpcd_ext,sizeof (dpcd_ext)); +if (ret <0 ) +return ret; + +if (outp->dp.dpcd[DP_DPCD_REV ] > dpcd_ext[DP_DPCD_REV ]) { +OUTP_DBG (outp,"Extended DPCD rev less than base DPCD rev (%d > %d)\n" , + outp->dp.dpcd[DP_DPCD_REV ], dpcd_ext[DP_DPCD_REV ]); +return 0 ; + } + +if (!memcmp (outp->dp.dpcd, dpcd_ext,sizeof (dpcd_ext))) +return 0 ; + +memcpy (outp->dp.dpcd, dpcd_ext,sizeof (dpcd_ext)); + +return 0 ; +} +void nvkm_dp_enable (struct nvkm_outp *outp,bool auxpwr) {@@ -689,7 +735,7 @@ nvkm_dp_enable(struct nvkm_outp *outp, bool auxpwr)memset (outp->dp.lttpr,0x00 ,sizeof (outp->dp.lttpr)); }Quoted 9 lines
Quoted 8 lines
drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c +1
-2-if (!nvkm_rdaux (aux,DPCD_RC00_DPCD_REV , outp->dp.dpcd,sizeof (outp->dp.dpcd))) { +if (!nvkm_dp_read_dpcd_caps (outp)) {const u8 rates[] = {0x1e ,0x14 ,0x0a ,0x06 ,0 };const u8 *rate;int rate_max; --2.40.1
--
Cheers,
Lyude Paul (she/her)
Software Engineer at Red Hat
Karol Herbst
Reviewed-byQuoted 24 lines · Karol Herbst
Quoted 22 lines · Lyude Paul
Quoted 19 lines · Karol Herbst
Quoted 9 lines · Lyude Paul
Currently we use the
drm_dp_dpcd_read_caps()helper in the DRM side of nouveau in order to read the DPCD of a DP connector, which makes sure we do the right thing and also check for extended DPCD caps. However, it turns out we're not currently doing this on the nvkm side since we don't have access to thedrm_dp_auxstructure there - which means that the DRM side of the driver and the NVKM side can end up with different DPCD capabilities for the same connector.Quoted 7 lines
Ideally to fix this, we want to start setting up the
drm_dp_auxdevice in NVKM before we've made contact with the DRM side - which should be pretty easy to accomplish (I'm already working on it!). Until then however, let's workaround this problem by porting a copy ofdrm_dp_read_dpcd_caps()into NVKM - which should fix this issue.Issue: https://gitlab.freedesktop.org/drm/nouveau/-/issues/211
Should a Fixes: or Cc: stable tag be added so it gets backported?
Quoted 103 lines
Quoted 3 lines
JFYI I think not adding one is fine nowadays? The stable bot seems to be pretty good at catching anything with the words fix/fixes in it
Yeah not sure.. I'd rather be specific and add it just to be sure. Anyway, it could also be done while pushing. I think the bigger question here was if this fix is good enough for stable or if you plan to rework it.
Quoted 94 lines
Quoted 79 lines
Quoted 20 lines
Signed-off-by Lyude Paul <[email protected]>--- drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c | 48 ++++++++++++++++++- 1 file changed, 47 insertions(+), 1 deletion(-)drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c +2
-0@@ -26,6 +26,8 @@#include "head.h" #include "ior.h" +#include <drm/display/drm_dp.h> +#include <subdev/bios.h> #include <subdev/bios/init.h> #include <subdev/gpio.h> drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c nvkm_dp_enable_supported_link_rates(struct nvkm_outp *outp) · line 639
Quoted 4 lines
drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c +1
-0@@ -634,6 +636,50 @@ nvkm_dp_enable_supported_link_rates(struct nvkm_outp *outp)return outp->dp.rates !=0 ; } +/* XXX: This is a big fat hack, and this is just drm_dp_read_dpcd_caps() Well.. maybe we should rephrase that _if_ we want to see it backported. But is this code really that bad? It kinda looks reasonable enough.
Quoted 50 lines
drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c +43
-0+* converted to work inside nvkm. This is a temporary holdover until we start +* passing the drm_dp_aux device through NVKM +*/ +static int +nvkm_dp_read_dpcd_caps (struct nvkm_outp *outp) +{ +struct nvkm_i2c_aux *aux = outp->dp.aux; +u8 dpcd_ext[DP_RECEIVER_CAP_SIZE ]; +int ret; + + ret =nvkm_rdaux (aux,DPCD_RC00_DPCD_REV , outp->dp.dpcd,DP_RECEIVER_CAP_SIZE ); +if (ret <0 ) +return ret; + +/* +* Prior to DP1.3 the bit represented by +* DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT was reserved. +* If it is set DP_DPCD_REV at 0000h could be at a value less than +* the true capability of the panel. The only way to check is to +* then compare 0000h and 2200h. +*/ +if (!(outp->dp.dpcd[DP_TRAINING_AUX_RD_INTERVAL ] & +DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT )) +return 0 ; + + ret =nvkm_rdaux (aux,DP_DP13_DPCD_REV , dpcd_ext,sizeof (dpcd_ext)); +if (ret <0 ) +return ret; + +if (outp->dp.dpcd[DP_DPCD_REV ] > dpcd_ext[DP_DPCD_REV ]) { +OUTP_DBG (outp,"Extended DPCD rev less than base DPCD rev (%d > %d)\n" , + outp->dp.dpcd[DP_DPCD_REV ], dpcd_ext[DP_DPCD_REV ]); +return 0 ; + } + +if (!memcmp (outp->dp.dpcd, dpcd_ext,sizeof (dpcd_ext))) +return 0 ; + +memcpy (outp->dp.dpcd, dpcd_ext,sizeof (dpcd_ext)); + +return 0 ; +} +void nvkm_dp_enable (struct nvkm_outp *outp,bool auxpwr) {@@ -689,7 +735,7 @@ nvkm_dp_enable(struct nvkm_outp *outp, bool auxpwr)memset (outp->dp.lttpr,0x00 ,sizeof (outp->dp.lttpr)); }Quoted 9 lines
Quoted 8 lines
drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c +1
-2-if (!nvkm_rdaux (aux,DPCD_RC00_DPCD_REV , outp->dp.dpcd,sizeof (outp->dp.dpcd))) { +if (!nvkm_dp_read_dpcd_caps (outp)) {const u8 rates[] = {0x1e ,0x14 ,0x0a ,0x06 ,0 };const u8 *rate;int rate_max; --2.40.1
--
Cheers,
Lyude Paul (she/her)
Software Engineer at Red Hat
before I forget:
Quoted 9 lines · Lyude Paul
Currently we use the
drm_dp_dpcd_read_caps()helper in the DRM side of nouveau in order to read the DPCD of a DP connector, which makes sure we do the right thing and also check for extended DPCD caps. However, it turns out we're not currently doing this on the nvkm side since we don't have access to thedrm_dp_auxstructure there - which means that the DRM side of the driver and the NVKM side can end up with different DPCD capabilities for the same connector.
Quoted 5 lines
Ideally to fix this, we want to start setting up the
drm_dp_auxdevice in NVKM before we've made contact with the DRM side - which should be pretty easy to accomplish (I'm already working on it!). Until then however, let's workaround this problem by porting a copy ofdrm_dp_read_dpcd_caps()into NVKM - which should fix this issue.
I wouldn't worry about this. I'm moving basically everything to the DRM side of the driver for the GSP work anyway.
Ben.
Quoted 83 lines
Issue: https://gitlab.freedesktop.org/drm/nouveau/-/issues/211
Signed-off-by Lyude Paul <[email protected]>--- drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c | 48 ++++++++++++++++++- 1 file changed, 47 insertions(+), 1 deletion(-)drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c +47
-2@@ -26,6 +26,8 @@#include "head.h" #include "ior.h" +#include <drm/display/drm_dp.h> +#include <subdev/bios.h> #include <subdev/bios/init.h> #include <subdev/gpio.h> @@ -634,6 +636,50 @@ nvkm_dp_enable_supported_link_rates(struct nvkm_outp *outp)return outp->dp.rates !=0 ; } +/* XXX: This is a big fat hack, and this is just drm_dp_read_dpcd_caps() +* converted to work inside nvkm. This is a temporary holdover until we start +* passing the drm_dp_aux device through NVKM +*/ +static int +nvkm_dp_read_dpcd_caps (struct nvkm_outp *outp) +{ +struct nvkm_i2c_aux *aux = outp->dp.aux; +u8 dpcd_ext[DP_RECEIVER_CAP_SIZE ]; +int ret; + + ret =nvkm_rdaux (aux,DPCD_RC00_DPCD_REV , outp->dp.dpcd,DP_RECEIVER_CAP_SIZE ); +if (ret <0 ) +return ret; + +/* +* Prior to DP1.3 the bit represented by +* DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT was reserved. +* If it is set DP_DPCD_REV at 0000h could be at a value less than +* the true capability of the panel. The only way to check is to +* then compare 0000h and 2200h. +*/ +if (!(outp->dp.dpcd[DP_TRAINING_AUX_RD_INTERVAL ] & +DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT )) +return 0 ; + + ret =nvkm_rdaux (aux,DP_DP13_DPCD_REV , dpcd_ext,sizeof (dpcd_ext)); +if (ret <0 ) +return ret; + +if (outp->dp.dpcd[DP_DPCD_REV ] > dpcd_ext[DP_DPCD_REV ]) { +OUTP_DBG (outp,"Extended DPCD rev less than base DPCD rev (%d > %d)\n" , + outp->dp.dpcd[DP_DPCD_REV ], dpcd_ext[DP_DPCD_REV ]); +return 0 ; + } + +if (!memcmp (outp->dp.dpcd, dpcd_ext,sizeof (dpcd_ext))) +return 0 ; + +memcpy (outp->dp.dpcd, dpcd_ext,sizeof (dpcd_ext)); + +return 0 ; +} +void nvkm_dp_enable (struct nvkm_outp *outp,bool auxpwr) {@@ -689,7 +735,7 @@ nvkm_dp_enable(struct nvkm_outp *outp, bool auxpwr)memset (outp->dp.lttpr,0x00 ,sizeof (outp->dp.lttpr)); } -if (!nvkm_rdaux (aux,DPCD_RC00_DPCD_REV , outp->dp.dpcd,sizeof (outp->dp.dpcd))) { +if (!nvkm_dp_read_dpcd_caps (outp)) {const u8 rates[] = {0x1e ,0x14 ,0x0a ,0x06 ,0 };const u8 *rate;int rate_max; --2.40.1