drm: bridge: samsung-dsim: Initialize ULPS EXIT for i.MX8M DSIM
Subsystems (4)
PATCH 1/1 drm: bridge: samsung-dsim: Initialize ULPS EXIT for i.MX8M DSIM
The ULPS EXIT is initialized to 0xaf in downstream BSP as well as older revisions of this patchset, in newer revisions of the DSIM patchset it was left out and set to 0. Fix it.
---
Cc: Andrzej Hajda <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Inki Dae <[email protected]>
Cc: Jagan Teki <[email protected]>
Cc: Jernej Skrabec <[email protected]>
Cc: Jonas Karlman <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: Marek Szyprowski <[email protected]>
Cc: Neil Armstrong <[email protected]>
Cc: Robert Foss <[email protected]>
Cc: [email protected]
--- drivers/gpu/drm/bridge/samsung-dsim.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/bridge/samsung-dsim.c +1 -1
@@ -384,7 +384,7 @@ static const unsigned int imx8mm_dsim_reg_values[] = { [RESET_TYPE] = DSIM_SWRST, [PLL_TIMER] = 500, [STOP_STATE_CNT] = 0xf, - [PHYCTRL_ULPS_EXIT] = 0, + [PHYCTRL_ULPS_EXIT] = DSIM_PHYCTRL_ULPS_EXIT(0xaf), [PHYCTRL_VREG_LP] = 0, [PHYCTRL_SLEW_UP] = 0, [PHYTIMING_LPX] = DSIM_PHYTIMING_LPX(0x06),
Signature · 1 line
2.40.1
Quoted 5 lines · Marek Vasut
The ULPS EXIT is initialized to
0xafin downstream BSP as well as older revisions of this patchset, in newer revisions of the DSIM patchset it was left out and set to 0. Fix it.
Applied, thanks!
[1/1] drm: bridge: samsung-dsim: Initialize ULPS EXIT for i.MX8M DSIM
https://cgit.freedesktop.org/drm/drm-misc/commit/?id=192948f6a923
Rob