mx28evk: Convert to CONFIG_DM_SERIAL
Subsystems (3)
Fabio Estevam
reviewerPATCH 1/3 mx28evk: Convert to CONFIG_DM_SERIAL
From: Fabio Estevam <[email protected]>
The conversion to CONFIG_DM_SERIAL is mandatory, so select this option.
--- arch/arm/Kconfig | 1 - arch/arm/mach-imx/mxs/Kconfig | 1 + configs/mx28evk_defconfig | 2 +- 3 files changed, 2 insertions(+), 2 deletions(-)
arch/arm/Kconfig +0 -1
@@ -919,7 +919,6 @@ config ARCH_MX28 bool "NXP i.MX28 family" select CPU_ARM926EJS select GPIO_EXTRA_HEADER - select PL011_SERIAL if !TARGET_XEA select MACH_IMX select SUPPORT_SPL
arch/arm/mach-imx/mxs/Kconfig +1 -0
@@ -41,6 +41,7 @@ choice config TARGET_MX28EVK bool "Support mx28evk" + select PL01X_SERIAL select BOARD_EARLY_INIT_F config TARGET_XEA
configs/mx28evk_defconfig +1 -1
@@ -62,6 +62,6 @@ CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y CONFIG_RTC_MXS=y -CONFIG_CONS_INDEX=0 +CONFIG_DM_SERIAL=y CONFIG_SPI=y CONFIG_USB=y
Signature · 1 line
2.34.1
Fabio Estevam
reviewerPATCH 2/3 mx23evk: Convert to CONFIG_DM_SERIAL
From: Fabio Estevam <[email protected]>
The conversion to CONFIG_DM_SERIAL is mandatory, so select this option.
--- arch/arm/Kconfig | 2 +- arch/arm/mach-imx/mxs/Kconfig | 1 + configs/mx23evk_defconfig | 1 + 3 files changed, 3 insertions(+), 1 deletion(-)
arch/arm/Kconfig +1 -1
@@ -912,7 +912,7 @@ config ARCH_MX23 select CPU_ARM926EJS select GPIO_EXTRA_HEADER select MACH_IMX - select PL011_SERIAL + select PL011_SERIAL if !TARGET_MX23EVK select SUPPORT_SPL config ARCH_MX28
arch/arm/mach-imx/mxs/Kconfig +1 -0
@@ -14,6 +14,7 @@ config TARGET_MX23_OLINUXINO config TARGET_MX23EVK bool "Support mx23evk" + select PL01X_SERIAL select BOARD_EARLY_INIT_F config TARGET_XFI3
configs/mx23evk_defconfig +1 -0
@@ -49,6 +49,7 @@ CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y CONFIG_CONS_INDEX=0 +CONFIG_DM_SERIAL=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y
Signature · 1 line
2.34.1
PATCH 2/3 mx23evk: Convert to CONFIG_DM_SERIAL
Quoted 3 lines
From: Fabio Estevam <[email protected]>
The conversion toCONFIG_DM_SERIALis mandatory, so select this option.Signed-off-by Fabio Estevam <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Erika Unter HRB 165235 Munich, Office: Kirchenstr.5, 82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
Fabio Estevam
reviewerPATCH 3/3 mx23_olinuxino: Convert to CONFIG_DM_SERIAL
In reply to Fabio EstevamFrom: Fabio Estevam <[email protected]>
The conversion to CONFIG_DM_SERIAL is mandatory, so select this option.
--- arch/arm/Kconfig | 1 - arch/arm/mach-imx/mxs/Kconfig | 1 + configs/mx23_olinuxino_defconfig | 1 + 3 files changed, 2 insertions(+), 1 deletion(-)
arch/arm/Kconfig +0 -1
@@ -912,7 +912,6 @@ config ARCH_MX23 select CPU_ARM926EJS select GPIO_EXTRA_HEADER select MACH_IMX - select PL011_SERIAL if !TARGET_MX23EVK select SUPPORT_SPL config ARCH_MX28
arch/arm/mach-imx/mxs/Kconfig +1 -0
@@ -10,6 +10,7 @@ choice config TARGET_MX23_OLINUXINO bool "Support mx23_olinuxino" + select PL01X_SERIAL select BOARD_EARLY_INIT_F config TARGET_MX23EVK
configs/mx23_olinuxino_defconfig +1 -0
@@ -50,6 +50,7 @@ CONFIG_LED_STATUS_BOOT=0 CONFIG_LED_STATUS_CMD=y CONFIG_MMC_MXS=y CONFIG_CONS_INDEX=0 +CONFIG_DM_SERIAL=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_HOST_ETHER=y
Signature · 1 line
2.34.1
PATCH 3/3 mx23_olinuxino: Convert to CONFIG_DM_SERIAL
Quoted 3 lines
From: Fabio Estevam <[email protected]>
The conversion toCONFIG_DM_SERIALis mandatory, so select this option.Signed-off-by Fabio Estevam <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Erika Unter HRB 165235 Munich, Office: Kirchenstr.5, 82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
PATCH 1/3 mx28evk: Convert to CONFIG_DM_SERIAL
In reply to Fabio EstevamQuoted 3 lines
From: Fabio Estevam <[email protected]>
The conversion toCONFIG_DM_SERIALis mandatory, so select this option.Signed-off-by Fabio Estevam <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Erika Unter HRB 165235 Munich, Office: Kirchenstr.5, 82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================