Migration to using binman for bootloader
Subsystems (2)
v6 cover Migration to using binman for bootloader
This series aims to eliminate the use of additional custom repositories such as k3-image-gen (K3 Image Generation) repo and core-secdev-k3 (K3 Security Development Tools) that was plumbed into the U-Boot build flow to generate boot images for TI K3 platform devices. And instead, we move towards using binman that aligns better with the community standard build flow.
This series uses binman for all K3 platforms supported on U-Boot currently; both HS (High Security, both SE and FS) and GP (General Purpose) devices.
Background on using k3-image-gen:
* TI K3 devices require a SYSFW (System Firmware) image consisting of a signed system firmware image and board configuration binaries, this is needed to bring up system firmware during U-Boot R5 SPL startup.
* Board configuration data contain board-specific information such as resource management, power management and security.
Background on using core-secdev-k3:
* Contains resources to sign x509 certificates for HS devices
Series intends to use binman to take over the packaging and signing for the R5 bootloader images tiboot3.bin (and sysfw.itb, for non-combined boot flow) instead of k3-image-gen.
Series also packages the A72/A53 bootloader images (tispl.bin and u-boot.img) using ATF, OPTEE and DM (Device Manager)
Changes in v6:
- addressed whitespace warnings
- added testcase for overwriting symlink functionality
- s%/Arm Trusted Firmware/Trusted Firmware-A
- s%/tee-pager_v2.bin/tee-raw.bin
- k3-am65-iot2050 image fit@0x180000 filename changed to tispl.bin
Changes in v5:
- updated all board configurations to latest
- changed output binary filenames
- fixed multiple certificate generation leading to packaging inconsistency in ti-secure*.py
- added patch to overwrite symlink if exists, patch 21/23 ("binman: Overwrite symlink if it already exists")
Changes in v4:
- added support for iot2050
- documentation fixes
- move to using self.Raise in ti-board-config etype
- introduced common k3-binman.dtsi (further reduction in code duplication can be targeted, this as first step)
Changes in v3:
- added support for HS-FS devices
- added support for AM68-sk
- added back dropped documentation patch
- changed prefix for SYSFW and DM files to expected directory name
- extended test coverage to 100%
- documentation fixes
- corrected formatting changes
Changes in v2:
- removed all external scripts
- created ti-board-config etype to support generation of board config binaries
- created ti-secure and ti-secure-rom etypes to handle signing instead of using external TI_SECURE_DEV_PKG
- updated openssl btool to support x509 certificate generation
- dropped Makefile changes to obtain external binary components, moving to using BINMAN_INDIRS to achieve the same
CI/CD passes 100% (series based on -next) [1]
v1: https://patchwork.ozlabs.org/project/uboot/cover/[email protected]/
v2: https://patchwork.ozlabs.org/project/uboot/cover/[email protected]/
v3: https://patchwork.ozlabs.org/project/uboot/cover/[email protected]/
v4: https://patchwork.ozlabs.org/project/uboot/cover/[email protected]/
v5: https://patchwork.ozlabs.org/project/uboot/cover/[email protected]/
[1] https://github.com/u-boot/u-boot/pull/363
Andrew Davis (1):
binman: Overwrite symlink if it already exists
Neha Malcom Francis (20):
binman: ti-board-config: Add support for TI board config binaries
binman: ti-secure: Add support for TI signing
arm: dts: k3: Add support for packaging sysfw.itb and tiboot3.bin
j721e: schema: yaml: Add general schema and J721E board config files
j721e: dts: binman: Package tiboot3.bin, sysfw.itb, tispl.bin,
u-boot.img
j7200: yaml: Add J7200 board config files
j7200: dts: binman: Package tiboot3.bin, tispl.bin, u-boot.img
am65x: yaml: Add AM65x board config files
am65: dts: binman: Package tiboot3.bin, sysfw.itb, tispl.bin,
u-boot.img
am64x: yaml: Add board configs for AM64x
am64x: dts: binman: Package tiboot3.bin, tispl.bin u-boot.img
j721s2: yaml: Add board configs for J721S2
j721s2: dts: binman: Package tiboot3.bin, tispl.bin and u-boot.img
am62: yaml: Add board configs for AM62
am625: dts: binman: Package tiboot3.bin, tispl.bin and u-boot.img
am62a: yaml: Add board configs for AM62ax
am62a: dts: binman: Package tiboot3.bin, tispl.bin, u-boot.img
arm: k3-am65x-iot2050: Use binman for tispl.bin for iot2050
k3: tools: config.mk: Update makefile and remove scripts
doc: board: ti: Update documentation for binman flow
Tom Rini (2):
buildman: Create a requirements.txt file
CI: Make use of buildman requirements.txt
.azure-pipelines.yml | 4 + .gitlab-ci.yml | 4 + arch/arm/dts/k3-am625-r5-sk.dts | 1 + arch/arm/dts/k3-am625-sk-binman.dtsi | 463 +++ arch/arm/dts/k3-am625-sk-u-boot.dtsi | 2 + arch/arm/dts/k3-am62a-sk-binman.dtsi | 466 +++ arch/arm/dts/k3-am62a7-r5-sk.dts | 1 + arch/arm/dts/k3-am62a7-sk.dts | 1 + arch/arm/dts/k3-am642-evm-u-boot.dtsi | 2 + arch/arm/dts/k3-am642-r5-evm.dts | 1 + arch/arm/dts/k3-am642-sk-u-boot.dtsi | 2 + arch/arm/dts/k3-am64x-binman.dtsi | 515 +++ arch/arm/dts/k3-am65-iot2050-boot-image.dtsi | 76 +- arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 1 + .../dts/k3-am654-r5-base-board-u-boot.dtsi | 1 + arch/arm/dts/k3-am65x-binman.dtsi | 518 +++ .../arm/dts/k3-am68-sk-base-board-u-boot.dtsi | 2 + arch/arm/dts/k3-binman.dtsi | 116 + arch/arm/dts/k3-j7200-binman.dtsi | 502 +++ .../k3-j7200-common-proc-board-u-boot.dtsi | 2 + arch/arm/dts/k3-j721e-binman.dtsi | 701 ++++ .../k3-j721e-common-proc-board-u-boot.dtsi | 1 + .../arm/dts/k3-j721e-r5-common-proc-board.dts | 1 + arch/arm/dts/k3-j721e-sk-u-boot.dtsi | 1 + arch/arm/dts/k3-j721s2-binman.dtsi | 546 +++ .../k3-j721s2-common-proc-board-u-boot.dtsi | 2 + .../dts/k3-j721s2-r5-common-proc-board.dts | 1 + arch/arm/mach-k3/config.mk | 103 - board/ti/am62ax/Kconfig | 2 + board/ti/am62ax/board-cfg.yaml | 36 + board/ti/am62ax/pm-cfg.yaml | 12 + board/ti/am62ax/rm-cfg.yaml | 1151 ++++++ board/ti/am62ax/sec-cfg.yaml | 379 ++ board/ti/am62ax/tifs-rm-cfg.yaml | 1011 ++++++ board/ti/am62x/Kconfig | 2 + board/ti/am62x/board-cfg.yaml | 36 + board/ti/am62x/pm-cfg.yaml | 12 + board/ti/am62x/rm-cfg.yaml | 1088 ++++++ board/ti/am62x/sec-cfg.yaml | 379 ++ board/ti/am64x/Kconfig | 2 + board/ti/am64x/board-cfg.yaml | 36 + board/ti/am64x/pm-cfg.yaml | 12 + board/ti/am64x/rm-cfg.yaml | 1400 ++++++++ board/ti/am64x/sec-cfg.yaml | 380 ++ board/ti/am65x/Kconfig | 2 + board/ti/am65x/board-cfg.yaml | 36 + board/ti/am65x/pm-cfg.yaml | 12 + board/ti/am65x/rm-cfg.yaml | 2068 +++++++++++ board/ti/am65x/sec-cfg.yaml | 379 ++ board/ti/common/schema.yaml | 436 +++ board/ti/j721e/Kconfig | 4 + board/ti/j721e/board-cfg.yaml | 36 + board/ti/j721e/board-cfg_j7200.yaml | 36 + board/ti/j721e/pm-cfg.yaml | 12 + board/ti/j721e/pm-cfg_j7200.yaml | 12 + board/ti/j721e/rm-cfg.yaml | 3174 +++++++++++++++++ board/ti/j721e/rm-cfg_j7200.yaml | 2065 +++++++++++ board/ti/j721e/sec-cfg.yaml | 380 ++ board/ti/j721e/sec-cfg_j7200.yaml | 380 ++ board/ti/j721s2/Kconfig | 2 + board/ti/j721s2/board-cfg.yaml | 36 + board/ti/j721s2/pm-cfg.yaml | 12 + board/ti/j721s2/rm-cfg.yaml | 2901 +++++++++++++++ board/ti/j721s2/sec-cfg.yaml | 379 ++ board/ti/keys/custMpk.pem | 51 + board/ti/keys/ti-degenerate-key.pem | 10 + doc/board/ti/am62x_sk.rst | 54 +- doc/board/ti/j7200_evm.rst | 55 +- doc/board/ti/j721e_evm.rst | 58 +- doc/board/ti/k3.rst | 107 +- tools/binman/btool/openssl.py | 244 ++ tools/binman/entries.rst | 113 + tools/binman/etype/ti_board_config.py | 259 ++ tools/binman/etype/ti_secure.py | 78 + tools/binman/etype/ti_secure_rom.py | 249 ++ tools/binman/etype/x509_cert.py | 87 +- tools/binman/ftest.py | 90 +- tools/binman/image.py | 2 + tools/binman/test/277_ti_board_cfg.dts | 14 + .../binman/test/278_ti_board_cfg_combined.dts | 25 + .../binman/test/279_ti_board_cfg_no_type.dts | 11 + tools/binman/test/279_ti_secure.dts | 17 + tools/binman/test/280_ti_secure_rom.dts | 17 + .../test/281_ti_secure_rom_combined.dts | 25 + tools/binman/test/288_ti_secure_rom_a.dts | 19 + tools/binman/test/289_ti_secure_rom_b.dts | 18 + tools/binman/test/yaml/config.yaml | 19 + tools/binman/test/yaml/schema.yaml | 50 + tools/binman/test/yaml/schema_notype.yaml | 39 + tools/buildman/requirements.txt | 2 + tools/k3_fit_atf.sh | 123 - tools/k3_gen_x509_cert.sh | 262 -- 92 files changed, 23773 insertions(+), 661 deletions(-) create mode 100644 arch/arm/dts/k3-am625-sk-binman.dtsi create mode 100644 arch/arm/dts/k3-am62a-sk-binman.dtsi create mode 100644 arch/arm/dts/k3-am64x-binman.dtsi create mode 100644 arch/arm/dts/k3-am65x-binman.dtsi create mode 100644 arch/arm/dts/k3-binman.dtsi create mode 100644 arch/arm/dts/k3-j7200-binman.dtsi create mode 100644 arch/arm/dts/k3-j721e-binman.dtsi create mode 100644 arch/arm/dts/k3-j721s2-binman.dtsi delete mode 100644 arch/arm/mach-k3/config.mk create mode 100644 board/ti/am62ax/board-cfg.yaml create mode 100644 board/ti/am62ax/pm-cfg.yaml create mode 100644 board/ti/am62ax/rm-cfg.yaml create mode 100644 board/ti/am62ax/sec-cfg.yaml create mode 100644 board/ti/am62ax/tifs-rm-cfg.yaml create mode 100644 board/ti/am62x/board-cfg.yaml create mode 100644 board/ti/am62x/pm-cfg.yaml create mode 100644 board/ti/am62x/rm-cfg.yaml create mode 100644 board/ti/am62x/sec-cfg.yaml create mode 100644 board/ti/am64x/board-cfg.yaml create mode 100644 board/ti/am64x/pm-cfg.yaml create mode 100644 board/ti/am64x/rm-cfg.yaml create mode 100644 board/ti/am64x/sec-cfg.yaml create mode 100644 board/ti/am65x/board-cfg.yaml create mode 100644 board/ti/am65x/pm-cfg.yaml create mode 100644 board/ti/am65x/rm-cfg.yaml create mode 100644 board/ti/am65x/sec-cfg.yaml create mode 100644 board/ti/common/schema.yaml create mode 100644 board/ti/j721e/board-cfg.yaml create mode 100644 board/ti/j721e/board-cfg_j7200.yaml create mode 100644 board/ti/j721e/pm-cfg.yaml create mode 100644 board/ti/j721e/pm-cfg_j7200.yaml create mode 100644 board/ti/j721e/rm-cfg.yaml create mode 100644 board/ti/j721e/rm-cfg_j7200.yaml create mode 100644 board/ti/j721e/sec-cfg.yaml create mode 100644 board/ti/j721e/sec-cfg_j7200.yaml create mode 100644 board/ti/j721s2/board-cfg.yaml create mode 100644 board/ti/j721s2/pm-cfg.yaml create mode 100644 board/ti/j721s2/rm-cfg.yaml create mode 100644 board/ti/j721s2/sec-cfg.yaml create mode 100644 board/ti/keys/custMpk.pem create mode 100644 board/ti/keys/ti-degenerate-key.pem create mode 100644 tools/binman/etype/ti_board_config.py create mode 100644 tools/binman/etype/ti_secure.py create mode 100644 tools/binman/etype/ti_secure_rom.py create mode 100644 tools/binman/test/277_ti_board_cfg.dts create mode 100644 tools/binman/test/278_ti_board_cfg_combined.dts create mode 100644 tools/binman/test/279_ti_board_cfg_no_type.dts create mode 100644 tools/binman/test/279_ti_secure.dts create mode 100644 tools/binman/test/280_ti_secure_rom.dts create mode 100644 tools/binman/test/281_ti_secure_rom_combined.dts create mode 100644 tools/binman/test/288_ti_secure_rom_a.dts create mode 100644 tools/binman/test/289_ti_secure_rom_b.dts create mode 100644 tools/binman/test/yaml/config.yaml create mode 100644 tools/binman/test/yaml/schema.yaml create mode 100644 tools/binman/test/yaml/schema_notype.yaml create mode 100644 tools/buildman/requirements.txt delete mode 100755 tools/k3_fit_atf.sh delete mode 100755 tools/k3_gen_x509_cert.sh
Signature · 1 line
2.34.1
PATCH v6 1/23 binman: ti-board-config: Add support for TI board config binaries
The ti-board-config entry loads and validates a given YAML config file against a given schema, and generates the board config binary. K3 devices require these binaries to be packed into the final system firmware images.
--- tools/binman/entries.rst | 48 ++++ tools/binman/etype/ti_board_config.py | 259 ++++++++++++++++++ tools/binman/ftest.py | 20 ++ tools/binman/test/277_ti_board_cfg.dts | 14 + .../binman/test/278_ti_board_cfg_combined.dts | 25 ++ .../binman/test/279_ti_board_cfg_no_type.dts | 11 + tools/binman/test/yaml/config.yaml | 19 ++ tools/binman/test/yaml/schema.yaml | 50 ++++ tools/binman/test/yaml/schema_notype.yaml | 39 +++ 9 files changed, 485 insertions(+) create mode 100644 tools/binman/etype/ti_board_config.py create mode 100644 tools/binman/test/277_ti_board_cfg.dts create mode 100644 tools/binman/test/278_ti_board_cfg_combined.dts create mode 100644 tools/binman/test/279_ti_board_cfg_no_type.dts create mode 100644 tools/binman/test/yaml/config.yaml create mode 100644 tools/binman/test/yaml/schema.yaml create mode 100644 tools/binman/test/yaml/schema_notype.yaml
tools/binman/entries.rst +48 -0
@@ -1658,6 +1658,54 @@ by setting the size of the entry to something larger than the text. +.. _etype_ti_board_config: + +Entry: ti-board-config: An entry containing a TI schema validated board config binary +------------------------------------------------------------------------------------- + +This etype supports generation of two kinds of board configuration +binaries: singular board config binary as well as combined board config +binary. + +Properties / Entry arguments: + - config-file: File containing board configuration data in YAML + - schema-file: File containing board configuration YAML schema against + which the config file is validated + +Output files: + - board config binary: File containing board configuration binary + +These above parameters are used only when the generated binary is +intended to be a single board configuration binary. Example:: + + my-ti-board-config { + ti-board-config { + config = "board-config.yaml"; + schema = "schema.yaml"; + }; + }; + +To generate a combined board configuration binary, we pack the +needed individual binaries into a ti-board-config binary. In this case, +the available supported subnode names are board-cfg, pm-cfg, sec-cfg and +rm-cfg. The final binary is prepended with a header containing details about +the included board config binaries. Example:: + + my-combined-ti-board-config { + ti-board-config { + board-cfg { + config = "board-cfg.yaml"; + schema = "schema.yaml"; + }; + sec-cfg { + config = "sec-cfg.yaml"; + schema = "schema.yaml"; + }; + } + } + + + .. _etype_u_boot: Entry: u-boot: U-Boot flat binary
tools/binman/etype/ti_board_config.py new file +259 -0
259 lines not on this page · raw message
tools/binman/ftest.py +20 -0
@@ -97,6 +97,7 @@ ENV_DATA = b'var1=1\nvar2="2"' PRE_LOAD_MAGIC = b'UBSH' PRE_LOAD_VERSION = 0x11223344.to_bytes(4, 'big') PRE_LOAD_HDR_SIZE = 0x00001000.to_bytes(4, 'big') +TI_BOARD_CONFIG_DATA = b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00' # Subdirectory of the input dir to use to put test FDTs TEST_FDT_SUBDIR = 'fdts'
@@ -199,6 +200,9 @@ class TestFunctional(unittest.TestCase): shutil.copytree(cls.TestFile('files'), os.path.join(cls._indir, 'files')) + shutil.copytree(cls.TestFile('yaml'), + os.path.join(cls._indir, 'yaml')) + TestFunctional._MakeInputFile('compress', COMPRESS_DATA) TestFunctional._MakeInputFile('compress_big', COMPRESS_DATA_BIG) TestFunctional._MakeInputFile('bl31.bin', ATF_BL31_DATA)
@@ -6676,6 +6680,22 @@ fdt fdtmap Extract the devicetree blob from the fdtmap ['fit']) self.assertIn("Node '/fit': Missing tool: 'mkimage'", str(e.exception)) + def testTIBoardConfig(self): + """Test that a schema validated board config file can be generated""" + data = self._DoReadFile('277_ti_board_cfg.dts') + self.assertEqual(TI_BOARD_CONFIG_DATA, data) + + def testTIBoardConfigCombined(self): + """Test that a schema validated combined board config file can be generated""" + data = self._DoReadFile('278_ti_board_cfg_combined.dts') + configlen_noheader = TI_BOARD_CONFIG_DATA * 4 + self.assertGreater(data, configlen_noheader) + + def testTIBoardConfigNoDataType(self): + """Test that error is thrown when data type is not supported""" + with self.assertRaises(ValueError) as e: + data = self._DoReadFile('279_ti_board_cfg_no_type.dts') + self.assertIn("Schema validation error", str(e.exception)) if __name__ == "__main__": unittest.main()
tools/binman/test/277_ti_board_cfg.dts new file +14 -0
@@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + ti-board-config { + config = "yaml/config.yaml"; + schema = "yaml/schema.yaml"; + }; + }; +};
tools/binman/test/278_ti_board_cfg_combined.dts new file +25 -0
@@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + binman { + ti-board-config { + board-cfg { + config = "yaml/config.yaml"; + schema = "yaml/schema.yaml"; + }; + sec-cfg { + config = "yaml/config.yaml"; + schema = "yaml/schema.yaml"; + }; + rm-cfg { + config = "yaml/config.yaml"; + schema = "yaml/schema.yaml"; + }; + pm-cfg { + config = "yaml/config.yaml"; + schema = "yaml/schema.yaml"; + }; + }; + }; +};
tools/binman/test/279_ti_board_cfg_no_type.dts new file +11 -0
@@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + binman { + ti-board-config { + config = "yaml/config.yaml"; + schema = "yaml/schema_notype.yaml"; + }; + }; +};
tools/binman/test/yaml/config.yaml new file +19 -0
@@ -0,0 +1,19 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ +# +# Test config +# +--- + +main-branch: + obj: + a: 0x0 + b: 0 + arr: [0, 0, 0, 0] + another-arr: + - #1 + c: 0 + d: 0 + - #2 + c: 0 + d: 0
tools/binman/test/yaml/schema.yaml new file +50 -0
50 lines not on this page · raw message
tools/binman/test/yaml/schema_notype.yaml new file +39 -0
@@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ +# +# Test schema +# +--- + +definitions: + u8: + type: integer + minimum: 0 + maximum: 0xff + u16: + type: integer + minimum: 0 + maximum: 0xffff + u32: + type: integer + minimum: 0 + maximum: 0xffffffff + +type: object +properties: + main-branch: + type: object + properties: + obj: + type: object + properties: + a: + $ref: "#/definitions/u4" + b: + $ref: "#/definitions/u16" + arr: + type: array + minItems: 4 + maxItems: 4 + items: + $ref: "#/definitions/u8"
Signature · 1 line
2.34.1
PATCH v6 2/23 binman: ti-secure: Add support for TI signing
In reply to Neha Malcom FrancisThe ti-secure entry contains certificate for binaries that will be loaded or booted by system firmware whereas the ti-secure-rom entry contains certificate for binaries that will be booted by ROM. Support for both these types of certificates is necessary for booting of K3 devices.
--- board/ti/keys/custMpk.pem | 51 ++++ board/ti/keys/ti-degenerate-key.pem | 10 + tools/binman/btool/openssl.py | 244 +++++++++++++++++ tools/binman/entries.rst | 65 +++++ tools/binman/etype/ti_secure.py | 78 ++++++ tools/binman/etype/ti_secure_rom.py | 249 ++++++++++++++++++ tools/binman/etype/x509_cert.py | 87 +++++- tools/binman/ftest.py | 52 ++++ tools/binman/test/279_ti_secure.dts | 17 ++ tools/binman/test/280_ti_secure_rom.dts | 17 ++ .../test/281_ti_secure_rom_combined.dts | 25 ++ tools/binman/test/288_ti_secure_rom_a.dts | 19 ++ tools/binman/test/289_ti_secure_rom_b.dts | 18 ++ 13 files changed, 924 insertions(+), 8 deletions(-) create mode 100644 board/ti/keys/custMpk.pem create mode 100644 board/ti/keys/ti-degenerate-key.pem create mode 100644 tools/binman/etype/ti_secure.py create mode 100644 tools/binman/etype/ti_secure_rom.py create mode 100644 tools/binman/test/279_ti_secure.dts create mode 100644 tools/binman/test/280_ti_secure_rom.dts create mode 100644 tools/binman/test/281_ti_secure_rom_combined.dts create mode 100644 tools/binman/test/288_ti_secure_rom_a.dts create mode 100644 tools/binman/test/289_ti_secure_rom_b.dts
board/ti/keys/custMpk.pem new file +51 -0
@@ -0,0 +1,51 @@ +-----BEGIN RSA PRIVATE KEY----- +MIIJKQIBAAKCAgEAvxSuSdh/ctNrI83rSA5l3CJN8g5PgvbttfLd23yR+m5Z/9X3 +tt4EHYrM0pXZ0eDEwfhQv/9IDJEiUJpMe4vzlgooJrOk2eCpVUEa+z5bJ2y/ysBx +ry9yIu5GASVirT7HBPaxGLYswBJuD+KbPuWmoKgGRQNBF04WH6l01oRO1nmnELgR +qQ6SHyXdf7Hy0bnyaNgzWUuCfXfM0Zz6I7T7WIjyzerVFvIsdS36YsPBCW7gBnDg +tQcJmWLZ1uTnbG3IggdQk/fi2O3RX+PQns+TVNlf3V3ON2DxqxSKBHtlp7p/30VF +fEuhW65OxpQ9jE6H0pQ8pPOf2vzyNnznDa1aQjfxKoHQbqGnZwMeh+0Au3NKaCgx +ooKaowTB6If/RX6qwZ/UOwXHg/0hcf69fzjJFhlSDuYDM40dHsk2HM1OnYIpiM2b +Kr5sX3uysjp5AGp99a0anR7NWCrPXvROgKs7T9341N40osQg2VkZLYUCXh9osUyN +uREG6S12tViMUKg3bmZ4b4MwRk00n7QYSrm7+nvFrtYyEISEbD+agDM1/E281W5g +VFDPfm2AlwT6jwsg/b2YK6E3vVn9SuxFoQmLF8lyFDO3BV4SXeJaHc4hVPbh6tVV +qifrTQnfGUCCLmaJF2XZbrPWOE6NYRbWdNTeFl9RGdVCuIPSyN5LqWmXto0CAwEA +AQKCAgAzkAwcJ0z1GnId/lJQZno8NhGckRoJuEKbR8dwlCP8VUz6Ca5H7Y9kvXDa +Hs/hn+rYgP6hYOz7XyrIX2rmJ/T6dxEwqGeC1+o59FConcIRWHpE5zuGT6JYJL5F +TuZa48bm4v8VMQvQZOjIZpkIFwao8c6HTwKAnHTB5IN/48I2hCt+Cn3RhfoOZ7Rm +4gkpaSkt+7GXlhXHb82YfujNO+hbktEamhUYlQ9EK70Wa8aqmf3gHxO0JgsEFjW8 +lJaSnultlTW8SDcx3LMUUjCYumECk4oX/VlJfmKYjPlVjkr3QQ+Cm3nNucb4K4hc +c+JL+2ERhSj8RjXL7VgbNgdPnIjvQDJuTNqecTU8xWPYrkOLQpNibbLjnutLkhJz +fMyRtmDtrsey8WiCDuCHkPJ8/f8RjL2zWI9fzTDDIzdlEKouUFGOovaHVnbua6pn +hymcu9d9FV3p2rcbj0ivCs7e8j+vhSxFJEJoAbcQdXCTi/n2uR7pLtoMNiUzsejy +d46Uz+KEU920NTwE2z6JJq8I2vegnxjc7PDDrV3/5rK04B93aXiqvwWseCpxelrI +xaMkRHbXrIXRO6MXQ3N+zNq8Dg3hjGTTvaBKuwgvqLwlXY8+Aa3ooFzEOInIOSsI +XcWqXxt/tgZgsj9RwpC42t8kbA+BkbNk9EIUa+P5kEr2P/fO7QKCAQEA4EtArnOX +D6tQF8uTw8USOZC2P9s/ez1z4jRq3oKP0Kv4tJiuIObJ/dUvGVD7aM5v2xaCfhm8 +xpk09VPUgghfG5jR5qVvQr75kCNToJQudWi4ngk1HwKJzzTO11giFEdybvTUA+Pj +fmxCM0dYYqRWZoj0hLqXlUCwxE74BFIhJVjeYbf+nTQrqpllTLoW7MTZHzGx5SXx +4dNzyVAUH49Yt2D8mgXXCkf5sGLh762wj34b/rR10Kr4O5utGMZrfTRIbuQ1pNjU +m66baPzq+mC0BzqZEW70TgEb7lOr8rcVXLOi3r36omfd9/MHx7iZD6o3K1axSO15 +grD4ZrN7Ac3QJwKCAQEA2heCoBdpvy6YUk8AO2k8qDygTdmPQRuwjjT+Z2fMslBt +D7DkpKwZ6Bl9OclcpiiLHmH+hv65KqYg+tR0RRb7PcogB9El9x7yKkGTPZEYWGky +n8P84rJpKwjnwWQvPQktI1cs3YGvZA9DQTFBavRrwuzgd1oSJq5aPQ2tme0kMvWp +l1/B/cPK+PKCi/Wfisaze1TjijP9qIeUwkdNN6WLrLU3QgsGppcg2I7RQtAIikT6 +GkuiOQAvWMsrJVV6PNrVKz4fJDJ59Rz6jbDHZNi1MEYNxQoB/Pl7QIakbfjWpHLv +8Ey7cB2JKxjQy8tmyl8WNQVbXbE6daPXcMTUmaRAKwKCAQBv1lYMJmq+T2eCVen6 +BbvOpE+bi5EdvEiaFBTtmiBnpjg+pJq+oRU60h/H+c9CNR0lGxY6Fk9An4f+g6xE +ojP6KLsQzJCrsVny+wpp2TlJJcxYULMCIVvhy60PR0zG29E9biqBPhJjKUvhEcQK +e3LxcXyq6fdHXphFajLUxLbuTl+kTgBRFoBnclFGbsubh5PTsA3J+p+fQLZNPPar +veg4l82cZykQYU8pGkUaI3sUMYd3+zd7sqRP5JHs9pMGPRmY4YW2CsAIWIn5UZNB +ARMDP76vKKn8cyUgMuxb+9pU/OVLN2NPs4bEaZQJjAwV+YPEwldny7F47xEM9JVz +EtKlAoIBAQDUt62u3GdGE/p5/ZgqWoDRTyDEDfmN9aYFbmbdEP80xQE7FrxMaZhz +K7laja6SWmUm40nQ/c45bQQp4uLtKHcxU15egX7YRBTLZl5o5IasZR79ebnEm2O8 +l9kEZeU1USf3mmWmP4GExOZCRfqaiYA6BbUCdJXTqKdXeWnkAssV8UrS3JFoJHpq +yo7OWGqefyQ8nRW6jO9SW7uaqtUD+7H6aF5XSk3YWvusfdBZrHNH+fM/hpnZovaL +Us7ogTDS/laA8PyK37jYfMVdQhmZoU1Iomt3zkUWK3gt/aWPpfAlQf4Jka4YspZB +tNiijefaZ1hPqsPs5Joyd/YAhdsfaHc1AoIBAQCn/9j6RRjRaw0ip756oad4AXHz +XBwVB2CrY96qT6Hj9Sq7tGgdskqGkOQkAivBLBizUdcWv0t1yenOsSgasQeMlvlh +B8md9cLvpKXPB3HM3rTDH/xNXe0TpVKLf7SXC8HfDyIweHwMW3QgO2DWrvI4BV/T +ckBatRNQ90HxkqGFhC/Mp529lQlyg3ifxPxJsvZOyPMUnrflAvsKQk5c2ZiQg3nZ +h7I2pjSYgCl+Ib52l8p9bf1kcrVGgPM+auzm496i0RPobFeDBoBvSoznJktHJ7+3 +NnZH+jLiZCODiQPGtQUi+T6eIZUIJF0YASpsCCtUzXCxwW3lYIDNy7UlMivF +-----END RSA PRIVATE KEY-----
board/ti/keys/ti-degenerate-key.pem new file +10 -0
@@ -0,0 +1,10 @@ +-----BEGIN RSA PRIVATE KEY----- +MIIBWwIBAAKBgQDRfrnXQaP0k6vRK/gZ+bDflSU6y1JagGeQ/b+QYuiDz14japog +8fRSu5WBsAxaSaySAUwS3L9Ppw+hGMecmyIJ494aMfZTtk1g49gU58joduiRnu7e +QSZHMnehhuNlfD7A2tAAKnxIYuabs8zHYM/SS9Ne7t3kIQMbKfUSzNy6qQIBAQIB +AQJBAOelUA376o6w3HkShXfN+shaOZYqFuTJ9exLMwsLp7DZKXB5F9I4JJ+Vkvho +k6QWs7vkhleLSYUZknXHYm26ZE0CQQDnhTtd4PTBoZPjPXOeYMJFtEdMNy0XP6ey +bcce389ugoY7BEkvASrd8PHgJQHziepgWOG4DGp33c64Hfq4zI3NAgEBAgEBAkA0 +RbK4uqoLciQluesTPU6lBy7Se3Dw0F9xBqlF5SR4KI6q+zQrHpBKyFOofMHZgizR +iCrL55cxEM146zMw3AnF +-----END RSA PRIVATE KEY-----
tools/binman/btool/openssl.py +244 -0
256 lines not on this page · raw message
tools/binman/entries.rst +65 -0
71 lines not on this page · raw message
tools/binman/etype/ti_secure.py new file +78 -0
78 lines not on this page · raw message
tools/binman/etype/ti_secure_rom.py new file +249 -0
249 lines not on this page · raw message
tools/binman/etype/x509_cert.py +79 -8
111 lines not on this page · raw message
tools/binman/ftest.py +52 -0
69 lines not on this page · raw message
tools/binman/test/279_ti_secure.dts new file +17 -0
@@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + ti-secure { + content = <&unsecure_binary>; + }; + unsecure_binary: blob-ext { + filename = "ti_unsecure.bin"; + }; + }; +};
tools/binman/test/280_ti_secure_rom.dts new file +17 -0
@@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + ti-secure-rom { + content = <&unsecure_binary>; + }; + unsecure_binary: blob-ext { + filename = "ti_unsecure.bin"; + }; + }; +};
tools/binman/test/281_ti_secure_rom_combined.dts new file +25 -0
@@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + ti-secure-rom { + content = <&unsecure_binary>; + content-sbl = <&unsecure_binary>; + content-sysfw = <&unsecure_binary>; + content-sysfw-data = <&unsecure_binary>; + content-sysfw-inner-cert = <&unsecure_binary>; + content-dm-data = <&unsecure_binary>; + combined; + sysfw-inner-cert; + dm-data; + }; + unsecure_binary: blob-ext { + filename = "ti_unsecure.bin"; + }; + }; +};
tools/binman/test/288_ti_secure_rom_a.dts new file +19 -0
@@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + ti-secure-rom { + content = <&unsecure_binary>; + core = "secure"; + countersign; + }; + unsecure_binary: blob-ext { + filename = "ti_unsecure.bin"; + }; + }; +};
tools/binman/test/289_ti_secure_rom_b.dts new file +18 -0
@@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + ti-secure-rom { + content = <&unsecure_binary>; + core = "public"; + }; + unsecure_binary: blob-ext { + filename = "ti_unsecure.bin"; + }; + }; +};
Signature · 1 line
2.34.1
PATCH v6 3/23 arm: dts: k3: Add support for packaging sysfw.itb and tiboot3.bin
In reply to Neha Malcom FrancisBoard config binary artifacts must be generated to be used by binman to package sysfw.itb and tiboot3.bin for all K3 devices.
For devices that follow combined flow, these board configuration binaries must again be packaged into a combined board configuration blobs to be used by binman to package tiboot3.bin.
Add common k3-binman.dtsi to generate all the board configuration binaries needed.
Also add custMpk.pem and ti-degenerate-key.pem needed for signing GP and HS bootloader images common to all K3 devices.
--- arch/arm/dts/k3-binman.dtsi | 116 ++++++++++++++++++++++++++++++++++++ 1 file changed, 116 insertions(+) create mode 100644 arch/arm/dts/k3-binman.dtsi
arch/arm/dts/k3-binman.dtsi new file +116 -0
@@ -0,0 +1,116 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/ { + binman: binman { + multiple-images; + }; +}; + +&binman { + custMpk { + filename = "custMpk.pem"; + blob-ext { + filename = "../keys/custMpk.pem"; + }; + }; + + ti-degenerate-key { + filename = "ti-degenerate-key.pem"; + blob-ext { + filename = "../keys/ti-degenerate-key.pem"; + }; + }; +}; + +#ifndef CONFIG_ARM64 + +&binman { + board-cfg { + filename = "board-cfg.bin"; + bcfg_yaml: ti-board-config { + config = "board-cfg.yaml"; + schema = "../common/schema.yaml"; + }; + }; + pm-cfg { + filename = "pm-cfg.bin"; + rcfg_yaml: ti-board-config { + config = "pm-cfg.yaml"; + schema = "../common/schema.yaml"; + }; + }; + rm-cfg { + filename = "rm-cfg.bin"; + pcfg_yaml: ti-board-config { + config = "rm-cfg.yaml"; + schema = "../common/schema.yaml"; + }; + }; + sec-cfg { + filename = "sec-cfg.bin"; + scfg_yaml: ti-board-config { + config = "sec-cfg.yaml"; + schema = "../common/schema.yaml"; + }; + }; + combined-tifs-cfg { + filename = "combined-tifs-cfg.bin"; + ti-board-config { + bcfg_yaml_tifs: board-cfg { + config = "board-cfg.yaml"; + schema = "../common/schema.yaml"; + }; + scfg_yaml_tifs: sec-cfg { + config = "sec-cfg.yaml"; + schema = "../common/schema.yaml"; + }; + pcfg_yaml_tifs: pm-cfg { + config = "pm-cfg.yaml"; + schema = "../common/schema.yaml"; + }; + rcfg_yaml_tifs: rm-cfg { + config = "rm-cfg.yaml"; + schema = "../common/schema.yaml"; + }; + }; + }; + combined-dm-cfg { + filename = "combined-dm-cfg.bin"; + ti-board-config { + pcfg_yaml_dm: pm-cfg { + config = "pm-cfg.yaml"; + schema = "../common/schema.yaml"; + }; + rcfg_yaml_dm: rm-cfg { + config = "rm-cfg.yaml"; + schema = "../common/schema.yaml"; + }; + }; + }; + combined-sysfw-cfg { + filename = "combined-sysfw-cfg.bin"; + ti-board-config { + board-cfg { + config = "board-cfg.yaml"; + schema = "../common/schema.yaml"; + }; + sec-cfg { + config = "sec-cfg.yaml"; + schema = "../common/schema.yaml"; + }; + pm-cfg { + config = "pm-cfg.yaml"; + schema = "../common/schema.yaml"; + }; + rm-cfg { + config = "rm-cfg.yaml"; + schema = "../common/schema.yaml"; + }; + }; + }; +}; + +#endif
Signature · 1 line
2.34.1
PATCH v6 4/23 j721e: schema: yaml: Add general schema and J721E board config files
In reply to Neha Malcom FrancisSchema file in YAML must be provided in board/ti/common for validating input config files and packaging system firmware. The schema includes entries for rm-cfg, board-cfg, pm-cfg and sec-cfg.
Board config files must be provided in board/ti/<devicename> in YAML. These can then be consumed for generation of binaries to package system firmware. Added YAML configs for J721E in particular.
--- board/ti/common/schema.yaml | 436 +++++ board/ti/j721e/board-cfg.yaml | 36 + board/ti/j721e/pm-cfg.yaml | 12 + board/ti/j721e/rm-cfg.yaml | 3174 +++++++++++++++++++++++++++++++++ board/ti/j721e/sec-cfg.yaml | 380 ++++ 5 files changed, 4038 insertions(+) create mode 100644 board/ti/common/schema.yaml create mode 100644 board/ti/j721e/board-cfg.yaml create mode 100644 board/ti/j721e/pm-cfg.yaml create mode 100644 board/ti/j721e/rm-cfg.yaml create mode 100644 board/ti/j721e/sec-cfg.yaml
board/ti/common/schema.yaml new file +436 -0
@@ -0,0 +1,436 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ +# +# Config schema for TI K3 devices +# + +--- + +definitions: + u8: + type: integer + minimum: 0 + maximum: 0xff + u16: + type: integer + minimum: 0 + maximum: 0xffff + u32: + type: integer + minimum: 0 + maximum: 0xffffffff + + + +type: object +properties: + pm-cfg: + type: object + properties: + rev: + type: object + properties: + boardcfg_abi_maj: + $ref: "#/definitions/u8" + boardcfg_abi_min: + $ref: "#/definitions/u8" + board-cfg: + type: object + properties: + rev: + type: object + properties: + boardcfg_abi_maj: + $ref: "#/definitions/u8" + boardcfg_abi_min: + $ref: "#/definitions/u8" + control: + type: object + properties: + subhdr: + type: object + properties: + magic: + $ref: "#/definitions/u16" + size: + $ref: "#/definitions/u16" + main_isolation_enable: + $ref: "#/definitions/u8" + main_isolation_hostid: + $ref: "#/definitions/u16" + + + secproxy: + type: object + properties: + subhdr: + type: object + properties: + magic: + $ref: "#/definitions/u16" + size: + $ref: "#/definitions/u16" + scaling_factor: + $ref: "#/definitions/u8" + scaling_profile: + $ref: "#/definitions/u8" + disable_main_nav_secure_proxy: + $ref: "#/definitions/u8" + + msmc: + type: object + properties: + subhdr: + type: object + properties: + magic: + $ref: "#/definitions/u16" + size: + $ref: "#/definitions/u16" + msmc_cache_size: + $ref: "#/definitions/u8" + debug_cfg: + type: object + properties: + subhdr: + type: object + properties: + magic: + $ref: "#/definitions/u16" + size: + $ref: "#/definitions/u16" + trace_dst_enables: + $ref: "#/definitions/u16" + trace_src_enables: + $ref: "#/definitions/u16" + + sec-cfg: + type: object + properties: + rev: + type: object + properties: + boardcfg_abi_maj: + $ref: "#/definitions/u8" + boardcfg_abi_min: + $ref: "#/definitions/u8" + + processor_acl_list: + type: object + properties: + subhdr: + type: object + properties: + magic: + $ref: "#/definitions/u16" + size: + $ref: "#/definitions/u16" + proc_acl_entries: + type: array + minItems: 32 + maxItems: 32 + items: + type: object + properties: + processor_id: + $ref: "#/definitions/u8" + proc_access_master: + $ref: "#/definitions/u8" + proc_access_secondary: + type: array + minItems: 3 + maxItems: 3 + items: + $ref: "#/definitions/u8" + host_hierarchy: + type: object + properties: + subhdr: + type: object + properties: + magic: + $ref: "#/definitions/u16" + size: + $ref: "#/definitions/u16" + host_hierarchy_entries: + type: array + minItems: 32 + maxItems: 32 + items: + type: object + properties: + host_id: + $ref: "#/definitions/u8" + supervisor_host_id: + $ref: "#/definitions/u8" + + otp_config: + type: object + properties: + subhdr: + type: object + properties: + magic: + $ref: "#/definitions/u16" + size: + $ref: "#/definitions/u16" + otp_entry: + type: array + minItems: 32 + maxItems: 32 + items: + type: object + properties: + host_id: + $ref: "#/definitions/u8" + host_perms: + $ref: "#/definitions/u8" + write_host_id: + $ref: "#/definitions/u8" + + dkek_config: + type: object + properties: + subhdr: + type: object + properties: + magic: + $ref: "#/definitions/u16" + size: + $ref: "#/definitions/u16" + allowed_hosts: + type: array + minItems: 4 + maxItems: 4 + items: + $ref: "#/definitions/u8" + allow_dkek_export_tisci: + $ref: "#/definitions/u8" + rsvd: + type: array + minItems: 3 + maxItems: 3 + items: + $ref: "#/definitions/u8" + + sa2ul_cfg: + type: object + properties: + subhdr: + type: object + properties: + magic: + $ref: "#/definitions/u16" + size: + $ref: "#/definitions/u16" + rsvd: + type: array + minItems: 2 + maxItems: 4 + items: + $ref: "#/definitions/u8" + enable_saul_psil_global_config_writes: + $ref: "#/definitions/u8" + auth_resource_owner: + $ref: "#/definitions/u8" + + sec_dbg_config: + type: object + properties: + subhdr: + type: object + properties: + magic: + $ref: "#/definitions/u16" + size: + $ref: "#/definitions/u16" + allow_jtag_unlock: + $ref: "#/definitions/u8" + allow_wildcard_unlock: + $ref: "#/definitions/u8" + allowed_debug_level_rsvd: + $ref: "#/definitions/u8" + rsvd: + $ref: "#/definitions/u8" + min_cert_rev: + $ref: "#/definitions/u32" + jtag_unlock_hosts: + type: array + minItems: 4 + maxItems: 4 + items: + $ref: "#/definitions/u8" + + + sec_handover_cfg: + type: object + properties: + subhdr: + type: object + properties: + magic: + $ref: "#/definitions/u16" + size: + $ref: "#/definitions/u16" + handover_msg_sender: + $ref: "#/definitions/u8" + handover_to_host_id: + $ref: "#/definitions/u8" + rsvd: + type: array + minItems: 4 + maxItems: 4 + items: + $ref: "#/definitions/u8" + + rm-cfg: + type: object + properties: + rm_boardcfg: + type: object + properties: + rev: + type: object + properties: + boardcfg_abi_maj: + $ref: "#/definitions/u8" + boardcfg_abi_min: + $ref: "#/definitions/u8" + + host_cfg: + type: object + properties: + subhdr: + type: object + properties: + magic: + $ref: "#/definitions/u16" + size: + $ref: "#/definitions/u16" + host_cfg_entries: + type: array + minItems: 0 + maxItems: 32 + items: + type: object + properties: + host_id: + $ref: "#/definitions/u8" + allowed_atype: + $ref: "#/definitions/u8" + allowed_qos: + $ref: "#/definitions/u16" + allowed_orderid: + $ref: "#/definitions/u32" + allowed_priority: + $ref: "#/definitions/u16" + allowed_sched_priority: + $ref: "#/definitions/u8" + resasg: + type: object + properties: + subhdr: + type: object + properties: + magic: + $ref: "#/definitions/u16" + size: + $ref: "#/definitions/u16" + resasg_entries_size: + $ref: "#/definitions/u16" + reserved: + $ref: "#/definitions/u16" + + resasg_entries: + type: array + minItems: 0 + maxItems: 468 + items: + type: object + properties: + start_resource: + $ref: "#/definitions/u16" + num_resource: + $ref: "#/definitions/u16" + type: + $ref: "#/definitions/u16" + host_id: + $ref: "#/definitions/u8" + reserved: + $ref: "#/definitions/u8" + + tifs-rm-cfg: + type: object + properties: + rm_boardcfg: + type: object + properties: + rev: + type: object + properties: + boardcfg_abi_maj: + $ref: "#/definitions/u8" + boardcfg_abi_min: + $ref: "#/definitions/u8" + + host_cfg: + type: object + properties: + subhdr: + type: object + properties: + magic: + $ref: "#/definitions/u16" + size: + $ref: "#/definitions/u16" + host_cfg_entries: + type: array + minItems: 0 + maxItems: 32 + items: + type: object + properties: + host_id: + $ref: "#/definitions/u8" + allowed_atype: + $ref: "#/definitions/u8" + allowed_qos: + $ref: "#/definitions/u16" + allowed_orderid: + $ref: "#/definitions/u32" + allowed_priority: + $ref: "#/definitions/u16" + allowed_sched_priority: + $ref: "#/definitions/u8" + resasg: + type: object + properties: + subhdr: + type: object + properties: + magic: + $ref: "#/definitions/u16" + size: + $ref: "#/definitions/u16" + resasg_entries_size: + $ref: "#/definitions/u16" + reserved: + $ref: "#/definitions/u16" + + resasg_entries: + type: array + minItems: 0 + maxItems: 468 + items: + type: object + properties: + start_resource: + $ref: "#/definitions/u16" + num_resource: + $ref: "#/definitions/u16" + type: + $ref: "#/definitions/u16" + host_id: + $ref: "#/definitions/u8" + reserved: + $ref: "#/definitions/u8"
board/ti/j721e/board-cfg.yaml new file +36 -0
@@ -0,0 +1,36 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ +# +# Board configuration for J721E +# + +--- + +board-cfg: + rev: + boardcfg_abi_maj: 0x0 + boardcfg_abi_min: 0x1 + control: + subhdr: + magic: 0xC1D3 + size: 7 + main_isolation_enable: 0x5A + main_isolation_hostid: 0x2 + secproxy: + subhdr: + magic: 0x1207 + size: 7 + scaling_factor: 0x1 + scaling_profile: 0x1 + disable_main_nav_secure_proxy: 0 + msmc: + subhdr: + magic: 0xA5C3 + size: 5 + msmc_cache_size: 0x0 + debug_cfg: + subhdr: + magic: 0x020C + size: 8 + trace_dst_enables: 0x00 + trace_src_enables: 0x00
board/ti/j721e/pm-cfg.yaml new file +12 -0
@@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ +# +# Power management configuration for J721E +# + +--- + +pm-cfg: + rev: + boardcfg_abi_maj: 0x0 + boardcfg_abi_min: 0x1
board/ti/j721e/rm-cfg.yaml new file +3174 -0
2,516 lines not on this page · raw message
board/ti/j721e/sec-cfg.yaml new file +380 -0
380 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.34.1
Part of the diff is not shown here. View the raw message.
PATCH v6 5/23 j721e: dts: binman: Package tiboot3.bin, sysfw.itb, tispl.bin, u-boot.img
In reply to Neha Malcom FrancisBy providing entries in the binman node of the device tree, binman will be able to find and package board config artifacts generated by TIBoardConfig with sysfw.bin and generate the final image sysfw.itb. It will also pick out the R5 SPL and sign it with the help of TI signing entry and generate the final tiboot3.bin.
Entries for A72 build have been added to k3-j721e-binman.dtsi to generate tispl.bin and u-boot.img.
Support has been added for both HS-SE(SR 1.1), HS-FS(SR 2.0) and GP images In HS-SE, the encrypted system firmware binary must be signed along with the signed certificate binary.
HS-SE:
* tiboot3-j721e_sr1_1-hs-evm.bin
* sysfw-j721e_sr1_1-hs-evm.itb
* tispl.bin
* u-boot.img
HS-FS:
* tiboot3-j721e_sr2-hs-fs-evm.bin
* sysfw-j721e_sr2-hs-fs-evm.itb
* tispl.bin
* u-boot.img
GP:
* tiboot3.bin -->tiboot3-j721e-gp-evm.bin
* sysfw.itb --> sysfw-j721e-gp-evm.itb
* tispl.bin_unsigned
* u-boot.img_unsigned
It is to be noted that the bootflow followed by J721E requires:
tiboot3.bin:
* R5 SPL
* R5 SPL dtbs
sysfw.itb:
* TIFS
* board-cfg
* pm-cfg
* sec-cfg
* rm-cfg
tispl.bin:
* DM
* ATF
* OPTEE
* A72 SPL
* A72 SPL dtbs
u-boot.img:
* A72 U-Boot
* A72 U-Boot dtbs
--- arch/arm/dts/k3-j721e-binman.dtsi | 701 ++++++++++++++++++ .../k3-j721e-common-proc-board-u-boot.dtsi | 1 + .../arm/dts/k3-j721e-r5-common-proc-board.dts | 1 + arch/arm/dts/k3-j721e-sk-u-boot.dtsi | 1 + board/ti/j721e/Kconfig | 2 + 5 files changed, 706 insertions(+) create mode 100644 arch/arm/dts/k3-j721e-binman.dtsi
arch/arm/dts/k3-j721e-binman.dtsi new file +701 -0
@@ -0,0 +1,701 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +#include "k3-binman.dtsi" + +#ifdef CONFIG_TARGET_J721E_R5_EVM + +&binman { + tiboot3-j721e_sr1_1-hs-evm.bin { + filename = "tiboot3-j721e_sr1_1-hs-evm.bin"; + ti-secure-rom { + content = <&u_boot_spl>; + core = "public"; + load = <CONFIG_SPL_TEXT_BASE>; + keyfile = "custMpk.pem"; + }; + u_boot_spl: u-boot-spl { + no-expanded; + }; + }; + sysfw { + filename = "sysfw.bin"; + ti-secure-rom { + content = <&ti_fs_cert>; + core = "secure"; + load = <0x40000>; + keyfile = "custMpk.pem"; + countersign; + }; + ti_fs_cert: ti-fs-cert.bin { + filename = "ti-sysfw/ti-fs-firmware-j721e_sr1_1-hs-cert.bin"; + type = "blob-ext"; + optional; + }; + ti-fs-firmware-j721e_sr1_1-hs-enc.bin { + filename = "ti-sysfw/ti-fs-firmware-j721e_sr1_1-hs-enc.bin"; + type = "blob-ext"; + optional; + }; + }; + itb { + filename = "sysfw-j721e_sr1_1-hs-evm.itb"; + fit { + description = "SYSFW and Config fragments"; + #address-cells = <1>; + images { + sysfw.bin { + description = "sysfw"; + type = "firmware"; + arch = "arm"; + compression = "none"; + blob-ext { + filename = "sysfw.bin"; + }; + }; + board-cfg.bin { + description = "board-cfg"; + type = "firmware"; + arch = "arm"; + compression = "none"; + ti-secure { + content = <&board_cfg>; + keyfile = "custMpk.pem"; + }; + board_cfg: board-cfg { + filename = "board-cfg.bin"; + type = "blob-ext"; + }; + + }; + pm-cfg.bin { + description = "pm-cfg"; + type = "firmware"; + arch = "arm"; + compression = "none"; + ti-secure { + content = <&pm_cfg>; + keyfile = "custMpk.pem"; + }; + pm_cfg: pm-cfg { + filename = "pm-cfg.bin"; + type = "blob-ext"; + }; + }; + rm-cfg.bin { + description = "rm-cfg"; + type = "firmware"; + arch = "arm"; + compression = "none"; + ti-secure { + content = <&rm_cfg>; + keyfile = "custMpk.pem"; + }; + rm_cfg: rm-cfg { + filename = "rm-cfg.bin"; + type = "blob-ext"; + }; + }; + sec-cfg.bin { + description = "sec-cfg"; + type = "firmware"; + arch = "arm"; + compression = "none"; + ti-secure { + content = <&sec_cfg>; + keyfile = "custMpk.pem"; + }; + sec_cfg: sec-cfg { + filename = "sec-cfg.bin"; + type = "blob-ext"; + }; + }; + }; + }; + }; +}; + +&binman { + tiboot3-j721e_sr2-hs-fs-evm.bin { + filename = "tiboot3-j721e_sr2-hs-fs-evm.bin"; + ti-secure-rom { + content = <&u_boot_spl_fs>; + core = "public"; + load = <CONFIG_SPL_TEXT_BASE>; + keyfile = "custMpk.pem"; + }; + u_boot_spl_fs: u-boot-spl { + no-expanded; + }; + }; + sysfw_fs { + filename = "sysfw.bin_fs"; + ti-fs-cert-fs.bin { + filename = "ti-sysfw/ti-fs-firmware-j721e_sr2-hs-fs-cert.bin"; + type = "blob-ext"; + optional; + }; + ti-fs-firmware-j721e-hs-fs-enc.bin { + filename = "ti-sysfw/ti-fs-firmware-j721e_sr2-hs-fs-enc.bin"; + type = "blob-ext"; + optional; + }; + }; + itb_fs { + filename = "sysfw-j721e_sr2-hs-fs-evm.itb"; + fit { + description = "SYSFW and Config fragments"; + #address-cells = <1>; + images { + sysfw.bin { + description = "sysfw"; + type = "firmware"; + arch = "arm"; + compression = "none"; + blob-ext { + filename = "sysfw.bin_fs"; + }; + }; + board-cfg.bin { + description = "board-cfg"; + type = "firmware"; + arch = "arm"; + compression = "none"; + board-cfg { + filename = "board-cfg.bin"; + type = "blob-ext"; + }; + + }; + pm-cfg.bin { + description = "pm-cfg"; + type = "firmware"; + arch = "arm"; + compression = "none"; + pm-cfg { + filename = "pm-cfg.bin"; + type = "blob-ext"; + }; + }; + rm-cfg.bin { + description = "rm-cfg"; + type = "firmware"; + arch = "arm"; + compression = "none"; + rm-cfg { + filename = "rm-cfg.bin"; + type = "blob-ext"; + }; + }; + sec-cfg.bin { + description = "sec-cfg"; + type = "firmware"; + arch = "arm"; + compression = "none"; + sec-cfg { + filename = "sec-cfg.bin"; + type = "blob-ext"; + }; + }; + }; + }; + }; +}; + +&binman { + tiboot3-j721e-gp-evm.bin { + filename = "tiboot3-j721e-gp-evm.bin"; + symlink = "tiboot3.bin"; + ti-secure-rom { + content = <&u_boot_spl_unsigned>; + core = "public"; + load = <CONFIG_SPL_TEXT_BASE>; + sw-rev = <CONFIG_K3_X509_SWRV>; + keyfile = "ti-degenerate-key.pem"; + }; + u_boot_spl_unsigned: u-boot-spl { + no-expanded; + }; + }; + sysfw_gp { + filename = "sysfw.bin_gp"; + ti-secure-rom { + content = <&ti_fs>; + core = "secure"; + load = <0x40000>; + sw-rev = <CONFIG_K3_X509_SWRV>; + keyfile = "ti-degenerate-key.pem"; + }; + ti_fs: ti-fs.bin { + filename = "ti-sysfw/ti-fs-firmware-j721e-gp.bin"; + type = "blob-ext"; + optional; + }; + }; + itb_gp { + filename = "sysfw-j721e-gp-evm.itb"; + symlink = "sysfw.itb"; + fit { + description = "SYSFW and Config fragments"; + #address-cells = <1>; + images { + sysfw.bin { + description = "sysfw"; + type = "firmware"; + arch = "arm"; + compression = "none"; + blob-ext { + filename = "sysfw.bin_gp"; + }; + }; + board-cfg.bin { + description = "board-cfg"; + type = "firmware"; + arch = "arm"; + compression = "none"; + blob-ext { + filename = "board-cfg.bin"; + }; + }; + pm-cfg.bin { + description = "pm-cfg"; + type = "firmware"; + arch = "arm"; + compression = "none"; + blob-ext { + filename = "pm-cfg.bin"; + }; + }; + rm-cfg.bin { + description = "rm-cfg"; + type = "firmware"; + arch = "arm"; + compression = "none"; + blob-ext { + filename = "rm-cfg.bin"; + }; + }; + sec-cfg.bin { + description = "sec-cfg"; + type = "firmware"; + arch = "arm"; + compression = "none"; + blob-ext { + filename = "sec-cfg.bin"; + }; + }; + }; + }; + }; +}; +#endif + +#ifdef CONFIG_TARGET_J721E_A72_EVM + +#define SPL_NODTB "spl/u-boot-spl-nodtb.bin" +#define SPL_J721E_EVM_DTB "spl/dts/k3-j721e-common-proc-board.dtb" +#define SPL_J721E_SK_DTB "spl/dts/k3-j721e-sk.dtb" + +#define UBOOT_NODTB "u-boot-nodtb.bin" +#define J721E_EVM_DTB "arch/arm/dts/k3-j721e-common-proc-board.dtb" +#define J721E_SK_DTB "arch/arm/dts/k3-j721e-sk.dtb" + +&binman { + ti-dm { + filename = "ti-dm.bin"; + blob-ext { + filename = "ti-dm/j721e/ipc_echo_testb_mcu1_0_release_strip.xer5f"; + }; + }; + ti-spl { + filename = "tispl.bin"; + pad-byte = <0xff>; + + fit { + description = "Configuration to load ATF and SPL"; + #address-cells = <1>; + + images { + + atf { + description = "ARM Trusted Firmware"; + type = "firmware"; + arch = "arm64"; + compression = "none"; + os = "arm-trusted-firmware"; + load = <CONFIG_K3_ATF_LOAD_ADDR>; + entry = <CONFIG_K3_ATF_LOAD_ADDR>; + ti-secure { + content = <&atf>; + keyfile = "custMpk.pem"; + }; + atf: atf-bl31 { + }; + }; + + tee { + description = "OPTEE"; + type = "tee"; + arch = "arm64"; + compression = "none"; + os = "tee"; + load = <0x9e800000>; + entry = <0x9e800000>; + ti-secure { + content = <&tee>; + keyfile = "custMpk.pem"; + }; + tee: tee-os { + }; + }; + + dm { + description = "DM binary"; + type = "firmware"; + arch = "arm32"; + compression = "none"; + os = "DM"; + load = <0x89000000>; + entry = <0x89000000>; + ti-secure { + content = <&dm>; + keyfile = "custMpk.pem"; + }; + dm: blob-ext { + filename = "ti-dm.bin"; + }; + }; + + spl { + description = "SPL (64-bit)"; + type = "standalone"; + os = "U-Boot"; + arch = "arm64"; + compression = "none"; + load = <CONFIG_SPL_TEXT_BASE>; + entry = <CONFIG_SPL_TEXT_BASE>; + ti-secure { + content = <&u_boot_spl_nodtb>; + keyfile = "custMpk.pem"; + + }; + u_boot_spl_nodtb: blob-ext { + filename = SPL_NODTB; + }; + }; + + fdt-0 { + description = "k3-j721e-common-proc-board"; + type = "flat_dt"; + arch = "arm"; + compression = "none"; + ti-secure { + content = <&spl_j721e_evm_dtb>; + keyfile = "custMpk.pem"; + }; + spl_j721e_evm_dtb: blob-ext { + filename = SPL_J721E_EVM_DTB; + }; + }; + + fdt-1 { + description = "k3-j721e-sk"; + type = "flat_dt"; + arch = "arm"; + compression = "none"; + ti-secure { + content = <&spl_j721e_sk_dtb>; + keyfile = "custMpk.pem"; + + }; + spl_j721e_sk_dtb: blob-ext { + filename = SPL_J721E_SK_DTB; + }; + }; + }; + + configurations { + default = "conf-0"; + + conf-0 { + description = "k3-j721e-common-proc-board"; + firmware = "atf"; + loadables = "tee", "dm", "spl"; + fdt = "fdt-0"; + }; + + conf-1 { + description = "k3-j721e-sk"; + firmware = "atf"; + loadables = "tee", "dm", "spl"; + fdt = "fdt-1"; + }; + }; + }; + }; +}; + +&binman { + u-boot { + filename = "u-boot.img"; + pad-byte = <0xff>; + + fit { + description = "FIT image with multiple configurations"; + + images { + uboot { + description = "U-Boot for j721e board"; + type = "firmware"; + os = "u-boot"; + arch = "arm"; + compression = "none"; + load = <CONFIG_TEXT_BASE>; + ti-secure { + content = <&u_boot_nodtb>; + keyfile = "custMpk.pem"; + }; + u_boot_nodtb: u-boot-nodtb { + }; + hash { + algo = "crc32"; + }; + }; + + fdt-0 { + description = "k3-j721e-common-proc-board"; + type = "flat_dt"; + arch = "arm"; + compression = "none"; + ti-secure { + content = <&j721e_evm_dtb>; + keyfile = "custMpk.pem"; + + }; + j721e_evm_dtb: blob-ext { + filename = J721E_EVM_DTB; + }; + hash { + algo = "crc32"; + }; + }; + + fdt-1 { + description = "k3-j721e-sk"; + type = "flat_dt"; + arch = "arm"; + compression = "none"; + ti-secure { + content = <&j721e_sk_dtb>; + keyfile = "custMpk.pem"; + + }; + j721e_sk_dtb: blob-ext { + filename = J721E_SK_DTB; + }; + hash { + algo = "crc32"; + }; + }; + }; + + configurations { + default = "conf-0"; + + conf-0 { + description = "k3-j721e-common-proc-board"; + firmware = "uboot"; + loadables = "uboot"; + fdt = "fdt-0"; + }; + + conf-1 { + description = "k3-j721e-sk"; + firmware = "uboot"; + loadables = "uboot"; + fdt = "fdt-1"; + }; + }; + }; + }; +}; + +&binman { + ti-spl_unsigned { + filename = "tispl.bin_unsigned"; + pad-byte = <0xff>; + + fit { + description = "Configuration to load ATF and SPL"; + #address-cells = <1>; + + images { + + atf { + description = "ARM Trusted Firmware"; + type = "firmware"; + arch = "arm64"; + compression = "none"; + os = "arm-trusted-firmware"; + load = <CONFIG_K3_ATF_LOAD_ADDR>; + entry = <CONFIG_K3_ATF_LOAD_ADDR>; + atf-bl31 { + filename = "bl31.bin"; + }; + }; + + tee { + description = "OPTEE"; + type = "tee"; + arch = "arm64"; + compression = "none"; + os = "tee"; + load = <0x9e800000>; + entry = <0x9e800000>; + tee-os { + filename = "tee-pager_v2.bin"; + }; + }; + + dm { + description = "DM binary"; + type = "firmware"; + arch = "arm32"; + compression = "none"; + os = "DM"; + load = <0x89000000>; + entry = <0x89000000>; + blob-ext { + filename = "ti-dm.bin"; + }; + }; + + spl { + description = "SPL (64-bit)"; + type = "standalone"; + os = "U-Boot"; + arch = "arm64"; + compression = "none"; + load = <CONFIG_SPL_TEXT_BASE>; + entry = <CONFIG_SPL_TEXT_BASE>; + blob-ext { + filename = SPL_NODTB; + }; + }; + + fdt-0 { + description = "k3-j721e-common-proc-board"; + type = "flat_dt"; + arch = "arm"; + compression = "none"; + blob { + filename = SPL_J721E_EVM_DTB; + }; + }; + + fdt-1 { + description = "k3-j721e-sk"; + type = "flat_dt"; + arch = "arm"; + compression = "none"; + blob { + filename = SPL_J721E_SK_DTB; + }; + }; + }; + + configurations { + default = "conf-0"; + + conf-0 { + description = "k3-j721e-common-proc-board"; + firmware = "atf"; + loadables = "tee", "dm", "spl"; + fdt = "fdt-0"; + }; + + conf-1 { + description = "k3-j721e-sk"; + firmware = "atf"; + loadables = "tee", "dm", "spl"; + fdt = "fdt-1"; + }; + }; + }; + }; +}; + +&binman { + u-boot_unsigned { + filename = "u-boot.img_unsigned"; + pad-byte = <0xff>; + + fit { + description = "FIT image with multiple configurations"; + + images { + uboot { + description = "U-Boot for j721e board"; + type = "firmware"; + os = "u-boot"; + arch = "arm"; + compression = "none"; + load = <CONFIG_TEXT_BASE>; + blob { + filename = UBOOT_NODTB; + }; + hash { + algo = "crc32"; + }; + }; + + fdt-0 { + description = "k3-j721e-common-proc-board"; + type = "flat_dt"; + arch = "arm"; + compression = "none"; + blob { + filename = J721E_EVM_DTB; + }; + hash { + algo = "crc32"; + }; + }; + + fdt-1 { + description = "k3-j721e-sk"; + type = "flat_dt"; + arch = "arm"; + compression = "none"; + blob { + filename = J721E_SK_DTB; + }; + hash { + algo = "crc32"; + }; + }; + }; + + configurations { + default = "conf-0"; + + conf-0 { + description = "k3-j721e-common-proc-board"; + firmware = "uboot"; + loadables = "uboot"; + fdt = "fdt-0"; + }; + + conf-1 { + description = "k3-j721e-sk"; + firmware = "uboot"; + loadables = "uboot"; + fdt = "fdt-1"; + }; + }; + }; + }; +}; +#endif
arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi +1 -0
@@ -4,6 +4,7 @@ */ #include <dt-bindings/net/ti-dp83867.h> +#include "k3-j721e-binman.dtsi" / { chosen {
arch/arm/dts/k3-j721e-r5-common-proc-board.dts +1 -0
@@ -8,6 +8,7 @@ #include "k3-j721e-som-p0.dtsi" #include "k3-j721e-ddr-evm-lp4-4266.dtsi" #include "k3-j721e-ddr.dtsi" +#include "k3-j721e-binman.dtsi" #include <dt-bindings/phy/phy-cadence.h> / {
arch/arm/dts/k3-j721e-sk-u-boot.dtsi +1 -0
@@ -4,6 +4,7 @@ */ #include <dt-bindings/net/ti-dp83867.h> +#include "k3-j721e-binman.dtsi" / { chosen {
board/ti/j721e/Kconfig +2 -0
@@ -13,6 +13,7 @@ config TARGET_J721E_A72_EVM select BOARD_LATE_INIT imply TI_I2C_BOARD_DETECT select SYS_DISABLE_DCACHE_OPS + select BINMAN config TARGET_J721E_R5_EVM bool "TI K3 based J721E EVM running on R5"
@@ -22,6 +23,7 @@ config TARGET_J721E_R5_EVM select RAM select SPL_RAM select K3_DDRSS + select BINMAN imply SYS_K3_SPL_ATF imply TI_I2C_BOARD_DETECT
Signature · 1 line
2.34.1
PATCH v6 6/23 j7200: yaml: Add J7200 board config files
In reply to Neha Malcom FrancisAdded YAML configs for J7200
--- board/ti/j721e/board-cfg_j7200.yaml | 36 + board/ti/j721e/pm-cfg_j7200.yaml | 12 + board/ti/j721e/rm-cfg_j7200.yaml | 2065 +++++++++++++++++++++++++++ board/ti/j721e/sec-cfg_j7200.yaml | 380 +++++ 4 files changed, 2493 insertions(+) create mode 100644 board/ti/j721e/board-cfg_j7200.yaml create mode 100644 board/ti/j721e/pm-cfg_j7200.yaml create mode 100644 board/ti/j721e/rm-cfg_j7200.yaml create mode 100644 board/ti/j721e/sec-cfg_j7200.yaml
board/ti/j721e/board-cfg_j7200.yaml new file +36 -0
@@ -0,0 +1,36 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ +# +# Board configuration for J7200 +# + +--- + +board-cfg: + rev: + boardcfg_abi_maj : 0x0 + boardcfg_abi_min : 0x1 + control: + subhdr: + magic: 0xC1D3 + size: 7 + main_isolation_enable : 0x5A + main_isolation_hostid : 0x2 + secproxy: + subhdr: + magic: 0x1207 + size: 7 + scaling_factor : 0x1 + scaling_profile : 0x1 + disable_main_nav_secure_proxy : 0 + msmc: + subhdr: + magic: 0xA5C3 + size: 5 + msmc_cache_size : 0x10 + debug_cfg: + subhdr: + magic: 0x020C + size: 8 + trace_dst_enables : 0x00 + trace_src_enables : 0x00
board/ti/j721e/pm-cfg_j7200.yaml new file +12 -0
@@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ +# +# Power management configuration for J7200 +# + +--- + +pm-cfg: + rev: + boardcfg_abi_maj : 0x0 + boardcfg_abi_min : 0x1
board/ti/j721e/rm-cfg_j7200.yaml new file +2065 -0
2,065 lines not on this page · raw message
board/ti/j721e/sec-cfg_j7200.yaml new file +380 -0
380 lines not on this page · raw message
Signature · 1 line
2.34.1
PATCH v6 7/23 j7200: dts: binman: Package tiboot3.bin, tispl.bin, u-boot.img
In reply to Neha Malcom FrancisSupport has been added for both HS-SE(SR 2.0), HS-FS(SR 2.0) and GP images.
HS-SE:
* tiboot3-j7200_sr2-hs-evm.bin
* tispl.bin
* u-boot.img
HS-FS:
* tiboot3-j7200_sr2-hs-fs-evm.bin
* tispl.bin
* u-boot.img
GP:
* tiboot3.bin --> tiboot3-j7200-gp-evm.bin
* tispl.bin_unsigned
* u-boot.img_unsigned
It is to be noted that the bootflow followed by J7200 requires:
tiboot3.bin:
* R5 SPL
* R5 SPL dtbs
* TIFS
* board-cfg
* pm-cfg
* sec-cfg
* rm-cfg
tispl.bin:
* DM
* ATF
* OPTEE
* A72 SPL
* A72 SPL dtbs
u-boot.img:
* A72 U-Boot
* A72 U-Boot dtbs
--- arch/arm/dts/k3-j7200-binman.dtsi | 502 ++++++++++++++++++ .../k3-j7200-common-proc-board-u-boot.dtsi | 2 + board/ti/j721e/Kconfig | 2 + 3 files changed, 506 insertions(+) create mode 100644 arch/arm/dts/k3-j7200-binman.dtsi
arch/arm/dts/k3-j7200-binman.dtsi new file +502 -0
@@ -0,0 +1,502 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +#include "k3-binman.dtsi" + +#ifdef CONFIG_TARGET_J7200_R5_EVM + +&bcfg_yaml { + config = "board-cfg_j7200.yaml"; +}; + +&rcfg_yaml { + config = "rm-cfg_j7200.yaml"; +}; + +&pcfg_yaml { + config = "pm-cfg_j7200.yaml"; +}; + +&scfg_yaml { + config = "sec-cfg_j7200.yaml"; +}; + +&bcfg_yaml_tifs { + config = "board-cfg_j7200.yaml"; +}; + +&rcfg_yaml_tifs { + config = "rm-cfg_j7200.yaml"; +}; + +&pcfg_yaml_tifs { + config = "pm-cfg_j7200.yaml"; +}; + +&scfg_yaml_tifs { + config = "sec-cfg_j7200.yaml"; +}; + +&rcfg_yaml_dm { + config = "rm-cfg_j7200.yaml"; +}; + +&pcfg_yaml_dm { + config = "pm-cfg_j7200.yaml"; +}; + +&binman { + tiboot3-j7200_sr2-hs-evm.bin { + filename = "tiboot3-j7200_sr2-hs-evm.bin"; + ti-secure-rom { + content = <&u_boot_spl>, <&ti_fs_enc>, <&combined_tifs_cfg>, + <&combined_dm_cfg>, <&sysfw_inner_cert>; + combined; + dm-data; + sysfw-inner-cert; + keyfile = "custMpk.pem"; + sw-rev = <1>; + content-sbl = <&u_boot_spl>; + content-sysfw = <&ti_fs_enc>; + content-sysfw-data = <&combined_tifs_cfg>; + content-sysfw-inner-cert = <&sysfw_inner_cert>; + content-dm-data = <&combined_dm_cfg>; + load = <0x41c00000>; + load-sysfw = <0x40000>; + load-sysfw-data = <0x7f000>; + load-dm-data = <0x41c80000>; + }; + u_boot_spl: u-boot-spl { + no-expanded; + }; + ti_fs_enc: ti-fs-enc.bin { + filename = "ti-sysfw/ti-fs-firmware-j7200_sr2-hs-enc.bin"; + type = "blob-ext"; + optional; + }; + combined_tifs_cfg: combined-tifs-cfg.bin { + filename = "combined-tifs-cfg.bin"; + type = "blob-ext"; + }; + sysfw_inner_cert: sysfw-inner-cert { + filename = "ti-sysfw/ti-fs-firmware-j7200_sr2-hs-cert.bin"; + type = "blob-ext"; + optional; + }; + combined_dm_cfg: combined-dm-cfg.bin { + filename = "combined-dm-cfg.bin"; + type = "blob-ext"; + }; + }; +}; + +&binman { + tiboot3-j7200_sr2-hs-fs-evm.bin { + filename = "tiboot3-j7200_sr2-hs-fs-evm.bin"; + ti-secure-rom { + content = <&u_boot_spl_fs>, <&ti_fs_enc_fs>, <&combined_tifs_cfg_fs>, + <&combined_dm_cfg_fs>, <&sysfw_inner_cert_fs>; + combined; + dm-data; + sysfw-inner-cert; + keyfile = "custMpk.pem"; + sw-rev = <1>; + content-sbl = <&u_boot_spl_fs>; + content-sysfw = <&ti_fs_enc_fs>; + content-sysfw-data = <&combined_tifs_cfg_fs>; + content-sysfw-inner-cert = <&sysfw_inner_cert_fs>; + content-dm-data = <&combined_dm_cfg_fs>; + load = <0x41c00000>; + load-sysfw = <0x40000>; + load-sysfw-data = <0x7f000>; + load-dm-data = <0x41c80000>; + }; + u_boot_spl_fs: u-boot-spl { + no-expanded; + }; + ti_fs_enc_fs: ti-fs-enc.bin { + filename = "ti-sysfw/ti-fs-firmware-j7200_sr2-hs-fs-enc.bin"; + type = "blob-ext"; + optional; + }; + combined_tifs_cfg_fs: combined-tifs-cfg.bin { + filename = "combined-tifs-cfg.bin"; + type = "blob-ext"; + }; + sysfw_inner_cert_fs: sysfw-inner-cert { + filename = "ti-sysfw/ti-fs-firmware-j7200_sr2-hs-fs-cert.bin"; + type = "blob-ext"; + optional; + }; + combined_dm_cfg_fs: combined-dm-cfg.bin { + filename = "combined-dm-cfg.bin"; + type = "blob-ext"; + }; + }; +}; + +&binman { + tiboot3-j7200-gp-evm.bin { + filename = "tiboot3-j7200-gp-evm.bin"; + symlink = "tiboot3.bin"; + ti-secure-rom { + content = <&u_boot_spl_unsigned>, <&ti_fs_gp>, + <&combined_tifs_cfg_gp>, <&combined_dm_cfg_gp>; + combined; + dm-data; + content-sbl = <&u_boot_spl_unsigned>; + load = <0x41c00000>; + content-sysfw = <&ti_fs_gp>; + load-sysfw = <0x40000>; + content-sysfw-data = <&combined_tifs_cfg_gp>; + load-sysfw-data = <0x7f000>; + content-dm-data = <&combined_dm_cfg_gp>; + load-dm-data = <0x41c80000>; + sw-rev = <1>; + keyfile = "ti-degenerate-key.pem"; + }; + u_boot_spl_unsigned: u-boot-spl { + no-expanded; + }; + ti_fs_gp: ti-fs-gp.bin { + filename = "ti-sysfw/ti-fs-firmware-j7200-gp.bin"; + type = "blob-ext"; + optional; + }; + combined_tifs_cfg_gp: combined-tifs-cfg-gp.bin { + filename = "combined-tifs-cfg.bin"; + type = "blob-ext"; + }; + combined_dm_cfg_gp: combined-dm-cfg-gp.bin { + filename = "combined-dm-cfg.bin"; + type = "blob-ext"; + }; + }; +}; + +#endif + +#ifdef CONFIG_TARGET_J7200_A72_EVM + +#define SPL_NODTB "spl/u-boot-spl-nodtb.bin" +#define SPL_J7200_EVM_DTB "spl/dts/k3-j7200-common-proc-board.dtb" + +#define UBOOT_NODTB "u-boot-nodtb.bin" +#define J7200_EVM_DTB "arch/arm/dts/k3-j7200-common-proc-board.dtb" + +&binman { + ti-dm { + filename = "ti-dm.bin"; + blob-ext { + filename = "ti-dm/j7200/ipc_echo_testb_mcu1_0_release_strip.xer5f"; + }; + }; + ti-spl { + filename = "tispl.bin"; + pad-byte = <0xff>; + + fit { + description = "Configuration to load ATF and SPL"; + #address-cells = <1>; + + images { + + atf { + description = "ARM Trusted Firmware"; + type = "firmware"; + arch = "arm64"; + compression = "none"; + os = "arm-trusted-firmware"; + load = <CONFIG_K3_ATF_LOAD_ADDR>; + entry = <CONFIG_K3_ATF_LOAD_ADDR>; + ti-secure { + content = <&atf>; + keyfile = "custMpk.pem"; + }; + atf: atf-bl31 { + }; + }; + + tee { + description = "OPTEE"; + type = "tee"; + arch = "arm64"; + compression = "none"; + os = "tee"; + load = <0x9e800000>; + entry = <0x9e800000>; + ti-secure { + content = <&tee>; + keyfile = "custMpk.pem"; + }; + tee: tee-os { + }; + }; + + dm { + description = "DM binary"; + type = "firmware"; + arch = "arm32"; + compression = "none"; + os = "DM"; + load = <0x89000000>; + entry = <0x89000000>; + ti-secure { + content = <&dm>; + keyfile = "custMpk.pem"; + }; + + dm: blob-ext { + filename = "ti-dm.bin"; + }; + }; + + spl { + description = "SPL (64-bit)"; + type = "standalone"; + os = "U-Boot"; + arch = "arm64"; + compression = "none"; + load = <CONFIG_SPL_TEXT_BASE>; + entry = <CONFIG_SPL_TEXT_BASE>; + ti-secure { + content = <&u_boot_spl_nodtb>; + keyfile = "custMpk.pem"; + }; + u_boot_spl_nodtb: blob-ext { + filename = SPL_NODTB; + }; + }; + + fdt-0 { + description = "k3-j7200-common-proc-board"; + type = "flat_dt"; + arch = "arm"; + compression = "none"; + ti-secure { + content = <&spl_j7200_evm_dtb>; + keyfile = "custMpk.pem"; + }; + spl_j7200_evm_dtb: blob-ext { + filename = SPL_J7200_EVM_DTB; + }; + }; + + }; + + configurations { + default = "conf-0"; + + conf-0 { + description = "k3-j7200-common-proc-board"; + firmware = "atf"; + loadables = "tee", "dm", "spl"; + fdt = "fdt-0"; + }; + }; + }; + }; +}; + +&binman { + u-boot { + filename = "u-boot.img"; + pad-byte = <0xff>; + + fit { + description = "FIT image with multiple configurations"; + + images { + uboot { + description = "U-Boot for J7200 board"; + type = "firmware"; + os = "u-boot"; + arch = "arm"; + compression = "none"; + load = <CONFIG_TEXT_BASE>; + ti-secure { + content = <&u_boot_nodtb>; + keyfile = "custMpk.pem"; + }; + u_boot_nodtb: u-boot-nodtb { + }; + hash { + algo = "crc32"; + }; + }; + + fdt-0 { + description = "k3-j7200-common-proc-board"; + type = "flat_dt"; + arch = "arm"; + compression = "none"; + ti-secure { + content = <&j7200_evm_dtb>; + keyfile = "custMpk.pem"; + }; + j7200_evm_dtb: blob-ext { + filename = J7200_EVM_DTB; + }; + hash { + algo = "crc32"; + }; + }; + }; + + configurations { + default = "conf-0"; + + conf-0 { + description = "k3-j7200-common-proc-board"; + firmware = "uboot"; + loadables = "uboot"; + fdt = "fdt-0"; + }; + + }; + }; + }; +}; + +&binman { + ti-spl_unsigned { + filename = "tispl.bin_unsigned"; + pad-byte = <0xff>; + + fit { + description = "Configuration to load ATF and SPL"; + #address-cells = <1>; + + images { + + atf { + description = "ARM Trusted Firmware"; + type = "firmware"; + arch = "arm64"; + compression = "none"; + os = "arm-trusted-firmware"; + load = <CONFIG_K3_ATF_LOAD_ADDR>; + entry = <CONFIG_K3_ATF_LOAD_ADDR>; + atf-bl31 { + filename = "bl31.bin"; + }; + }; + + tee { + description = "OPTEE"; + type = "tee"; + arch = "arm64"; + compression = "none"; + os = "tee"; + load = <0x9e800000>; + entry = <0x9e800000>; + tee-os { + filename = "tee-pager_v2.bin"; + }; + }; + + dm { + description = "DM binary"; + type = "firmware"; + arch = "arm32"; + compression = "none"; + os = "DM"; + load = <0x89000000>; + entry = <0x89000000>; + blob-ext { + filename = "ti-dm.bin"; + }; + }; + + spl { + description = "SPL (64-bit)"; + type = "standalone"; + os = "U-Boot"; + arch = "arm64"; + compression = "none"; + load = <CONFIG_SPL_TEXT_BASE>; + entry = <CONFIG_SPL_TEXT_BASE>; + blob { + filename = SPL_NODTB; + }; + }; + + fdt-1 { + description = "k3-j7200-common-proc-board"; + type = "flat_dt"; + arch = "arm"; + compression = "none"; + blob { + filename = SPL_J7200_EVM_DTB; + }; + }; + }; + + configurations { + default = "conf-1"; + + conf-1 { + description = "k3-j7200-common-proc-board"; + firmware = "atf"; + loadables = "tee", "dm", "spl"; + fdt = "fdt-1"; + }; + }; + }; + }; +}; + +&binman { + u-boot_unsigned { + filename = "u-boot.img_unsigned"; + pad-byte = <0xff>; + + fit { + description = "FIT image with multiple configurations"; + + images { + uboot { + description = "U-Boot for J7200 board"; + type = "firmware"; + os = "u-boot"; + arch = "arm"; + compression = "none"; + load = <CONFIG_TEXT_BASE>; + blob { + filename = UBOOT_NODTB; + }; + hash { + algo = "crc32"; + }; + }; + + fdt-1 { + description = "k3-j7200-common-proc-board"; + type = "flat_dt"; + arch = "arm"; + compression = "none"; + blob { + filename = J7200_EVM_DTB; + }; + hash { + algo = "crc32"; + }; + }; + }; + + configurations { + default = "conf-1"; + + conf-1 { + description = "k3-j7200-common-proc-board"; + firmware = "uboot"; + loadables = "uboot"; + fdt = "fdt-1"; + }; + }; + }; + }; +}; +#endif
arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi +2 -0
@@ -3,6 +3,8 @@ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ */ +#include "k3-j7200-binman.dtsi" + / { chosen { stdout-path = "serial2:115200n8";
board/ti/j721e/Kconfig +2 -0
@@ -33,6 +33,7 @@ config TARGET_J7200_A72_EVM select BOARD_LATE_INIT imply TI_I2C_BOARD_DETECT select SYS_DISABLE_DCACHE_OPS + select BINMAN config TARGET_J7200_R5_EVM bool "TI K3 based J7200 EVM running on R5"
@@ -42,6 +43,7 @@ config TARGET_J7200_R5_EVM select RAM select SPL_RAM select K3_DDRSS + select BINMAN imply SYS_K3_SPL_ATF imply TI_I2C_BOARD_DETECT
Signature · 1 line
2.34.1
PATCH v6 8/23 am65x: yaml: Add AM65x board config files
In reply to Neha Malcom FrancisAdded YAML configs for AM65x
--- board/ti/am65x/board-cfg.yaml | 36 + board/ti/am65x/pm-cfg.yaml | 12 + board/ti/am65x/rm-cfg.yaml | 2068 +++++++++++++++++++++++++++++++++ board/ti/am65x/sec-cfg.yaml | 379 ++++++ 4 files changed, 2495 insertions(+) create mode 100644 board/ti/am65x/board-cfg.yaml create mode 100644 board/ti/am65x/pm-cfg.yaml create mode 100644 board/ti/am65x/rm-cfg.yaml create mode 100644 board/ti/am65x/sec-cfg.yaml
board/ti/am65x/board-cfg.yaml new file +36 -0
@@ -0,0 +1,36 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ +# +# Board configuration for AM65x +# + +--- + +board-cfg: + rev: + boardcfg_abi_maj : 0x0 + boardcfg_abi_min : 0x1 + control: + subhdr: + magic: 0xC1D3 + size: 7 + main_isolation_enable : 0x5A + main_isolation_hostid : 0x2 + secproxy: + subhdr: + magic: 0x1207 + size: 7 + scaling_factor : 0x1 + scaling_profile : 0x1 + disable_main_nav_secure_proxy : 0 + msmc: + subhdr: + magic: 0xA5C3 + size: 5 + msmc_cache_size : 0x10 + debug_cfg: + subhdr: + magic: 0x020C + size: 8 + trace_dst_enables : 0x00 + trace_src_enables : 0x00
board/ti/am65x/pm-cfg.yaml new file +12 -0
@@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ +# +# Power management configuration for AM65x +# + +--- + +pm-cfg: + rev: + boardcfg_abi_maj : 0x0 + boardcfg_abi_min : 0x1
board/ti/am65x/rm-cfg.yaml new file +2068 -0
2,068 lines not on this page · raw message
board/ti/am65x/sec-cfg.yaml new file +379 -0
379 lines not on this page · raw message
Signature · 1 line
2.34.1
PATCH v6 9/23 am65: dts: binman: Package tiboot3.bin, sysfw.itb, tispl.bin, u-boot.img
In reply to Neha Malcom FrancisSupport has been added for both HS-SE(SR 2.0) and GP(SR 2.0) images.
HS-SE:
* tiboot3-am65x_sr2-hs-evm.bin
* sysfw-am65x_sr2-hs-evm.itb
* tispl.bin
* u-boot.img
GP:
* tiboot3.bin --> tiboot3-am65x_sr2-gp-evm.bin
* sysfw.itb --> sysfw-am65x_sr2-gp-evm.itb
* tispl.bin_unsigned
* u-boot.img_unsigned
Note that the bootflow followed by AM65x requires:
tiboot3.bin:
* R5 SPL
* R5 SPL dtbs
sysfw.itb:
* sysfw
* board-cfg
* pm-cfg
* sec-cfg
* rm-cfg
tispl.bin:
* ATF
* OPTEE
* A53 SPL
* A53 SPL dtbs
u-boot.img:
* A53 U-Boot
* A53 U-Boot dtbs
--- arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 1 + .../dts/k3-am654-r5-base-board-u-boot.dtsi | 1 + arch/arm/dts/k3-am65x-binman.dtsi | 518 ++++++++++++++++++ board/ti/am65x/Kconfig | 2 + 4 files changed, 522 insertions(+) create mode 100644 arch/arm/dts/k3-am65x-binman.dtsi
arch/arm/dts/k3-am654-base-board-u-boot.dtsi +1 -0
@@ -4,6 +4,7 @@ */ #include "k3-am654-r5-base-board-u-boot.dtsi" +#include "k3-am65x-binman.dtsi" &pru0_0 { remoteproc-name = "pru0_0";
arch/arm/dts/k3-am654-r5-base-board-u-boot.dtsi +1 -0
@@ -5,6 +5,7 @@ #include <dt-bindings/pinctrl/k3.h> #include <dt-bindings/net/ti-dp83867.h> +#include "k3-am65x-binman.dtsi" / { chosen {
arch/arm/dts/k3-am65x-binman.dtsi new file +518 -0
518 lines not on this page · raw message
board/ti/am65x/Kconfig +2 -0
@@ -12,6 +12,7 @@ config TARGET_AM654_A53_EVM select ARM64 select SYS_DISABLE_DCACHE_OPS select BOARD_LATE_INIT + select BINMAN imply TI_I2C_BOARD_DETECT config TARGET_AM654_R5_EVM
@@ -20,6 +21,7 @@ config TARGET_AM654_R5_EVM select SYS_THUMB_BUILD select K3_LOAD_SYSFW select K3_AM654_DDRSS + select BINMAN imply SYS_K3_SPL_ATF imply TI_I2C_BOARD_DETECT
Signature · 1 line
2.34.1
PATCH v6 10/23 am64x: yaml: Add board configs for AM64x
In reply to Neha Malcom FrancisAdded YAML configs for AM64xx
--- board/ti/am64x/board-cfg.yaml | 36 + board/ti/am64x/pm-cfg.yaml | 12 + board/ti/am64x/rm-cfg.yaml | 1400 +++++++++++++++++++++++++++++++++ board/ti/am64x/sec-cfg.yaml | 380 +++++++++ 4 files changed, 1828 insertions(+) create mode 100644 board/ti/am64x/board-cfg.yaml create mode 100644 board/ti/am64x/pm-cfg.yaml create mode 100644 board/ti/am64x/rm-cfg.yaml create mode 100644 board/ti/am64x/sec-cfg.yaml
board/ti/am64x/board-cfg.yaml new file +36 -0
@@ -0,0 +1,36 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ +# +# Board configuration for AM64x +# + +--- + +board-cfg: + rev: + boardcfg_abi_maj : 0x0 + boardcfg_abi_min : 0x1 + control: + subhdr: + magic: 0xC1D3 + size: 7 + main_isolation_enable : 0x5A + main_isolation_hostid : 0x2 + secproxy: + subhdr: + magic: 0x1207 + size: 7 + scaling_factor : 0x1 + scaling_profile : 0x1 + disable_main_nav_secure_proxy : 0 + msmc: + subhdr: + magic: 0xA5C3 + size: 5 + msmc_cache_size : 0x0 + debug_cfg: + subhdr: + magic: 0x020C + size: 8 + trace_dst_enables : 0x00 + trace_src_enables : 0x00
board/ti/am64x/pm-cfg.yaml new file +12 -0
@@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ +# +# Power management configuration for AM64x +# + +--- + +pm-cfg: + rev: + boardcfg_abi_maj : 0x0 + boardcfg_abi_min : 0x1
board/ti/am64x/rm-cfg.yaml new file +1400 -0
1,400 lines not on this page · raw message
board/ti/am64x/sec-cfg.yaml new file +380 -0
380 lines not on this page · raw message
Signature · 1 line
2.34.1
PATCH v6 11/23 am64x: dts: binman: Package tiboot3.bin, tispl.bin u-boot.img
In reply to Neha Malcom FrancisSupport added for HS and GP boot binaries for AM64x.
HS-SE:
* tiboot3-am64x_sr2-hs-evm.bin
* tispl.bin
* u-boot.img
HS-FS:
* tiboot3-am64x_sr2-hs-fs-evm.bin
* tispl.bin
* u-boot.img
GP:
* tiboot3.bin --> tiboot3-am64x-gp-evm.bin
* tispl.bin_unsigned
* u-boot.img_unsigned
Note that the bootflow followed by AM64x requires:
tiboot3.bin:
* R5 SPL
* R5 SPL dtbs
* sysfw
* board-cfg
* pm-cfg
* sec-cfg
* rm-cfg
tispl.bin:
* ATF
* OPTEE
* A53 SPL
* A53 SPL dtbs
u-boot.img:
* A53 U-Boot
* A53 U-Boot dtbs
--- arch/arm/dts/k3-am642-evm-u-boot.dtsi | 2 + arch/arm/dts/k3-am642-r5-evm.dts | 1 + arch/arm/dts/k3-am642-sk-u-boot.dtsi | 2 + arch/arm/dts/k3-am64x-binman.dtsi | 515 ++++++++++++++++++++++++++ board/ti/am64x/Kconfig | 2 + 5 files changed, 522 insertions(+) create mode 100644 arch/arm/dts/k3-am64x-binman.dtsi
arch/arm/dts/k3-am642-evm-u-boot.dtsi +2 -0
@@ -3,6 +3,8 @@ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ */ +#include "k3-am64x-binman.dtsi" + / { chosen { stdout-path = "serial2:115200n8";
arch/arm/dts/k3-am642-r5-evm.dts +1 -0
@@ -8,6 +8,7 @@ #include "k3-am642.dtsi" #include "k3-am64-evm-ddr4-1600MTs.dtsi" #include "k3-am64-ddr.dtsi" +#include "k3-am64x-binman.dtsi" / { chosen {
arch/arm/dts/k3-am642-sk-u-boot.dtsi +2 -0
@@ -3,6 +3,8 @@ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/ */ +#include "k3-am64x-binman.dtsi" + / { chosen { stdout-path = "serial2:115200n8";
arch/arm/dts/k3-am64x-binman.dtsi new file +515 -0
515 lines not on this page · raw message
board/ti/am64x/Kconfig +2 -0
@@ -9,6 +9,7 @@ choice config TARGET_AM642_A53_EVM bool "TI K3 based AM642 EVM running on A53" select ARM64 + select BINMAN imply BOARD imply SPL_BOARD imply TI_I2C_BOARD_DETECT
@@ -21,6 +22,7 @@ config TARGET_AM642_R5_EVM select RAM select SPL_RAM select K3_DDRSS + select BINMAN imply SYS_K3_SPL_ATF imply TI_I2C_BOARD_DETECT
Signature · 1 line
2.34.1
PATCH v6 12/23 j721s2: yaml: Add board configs for J721S2
In reply to Neha Malcom FrancisAdded YAML configs for J721S2
--- board/ti/j721s2/board-cfg.yaml | 36 + board/ti/j721s2/pm-cfg.yaml | 12 + board/ti/j721s2/rm-cfg.yaml | 2901 ++++++++++++++++++++++++++++++++ board/ti/j721s2/sec-cfg.yaml | 379 +++++ 4 files changed, 3328 insertions(+) create mode 100644 board/ti/j721s2/board-cfg.yaml create mode 100644 board/ti/j721s2/pm-cfg.yaml create mode 100644 board/ti/j721s2/rm-cfg.yaml create mode 100644 board/ti/j721s2/sec-cfg.yaml
board/ti/j721s2/board-cfg.yaml new file +36 -0
@@ -0,0 +1,36 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ +# +# Board configuration for J721S2 +# + +--- + +board-cfg: + rev: + boardcfg_abi_maj : 0x0 + boardcfg_abi_min : 0x1 + control: + subhdr: + magic: 0xC1D3 + size: 7 + main_isolation_enable : 0x5A + main_isolation_hostid : 0x2 + secproxy: + subhdr: + magic: 0x1207 + size: 7 + scaling_factor : 0x1 + scaling_profile : 0x1 + disable_main_nav_secure_proxy : 0 + msmc: + subhdr: + magic: 0xA5C3 + size: 5 + msmc_cache_size : 0x0 + debug_cfg: + subhdr: + magic: 0x020C + size: 8 + trace_dst_enables : 0x00 + trace_src_enables : 0x00
board/ti/j721s2/pm-cfg.yaml new file +12 -0
@@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ +# +# Power management configuration for J721S2 +# + +--- + +pm-cfg: + rev: + boardcfg_abi_maj : 0x0 + boardcfg_abi_min : 0x1
board/ti/j721s2/rm-cfg.yaml new file +2901 -0
2,901 lines not on this page · raw message
board/ti/j721s2/sec-cfg.yaml new file +379 -0
51 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.34.1
Part of the diff is not shown here. View the raw message.
PATCH v6 13/23 j721s2: dts: binman: Package tiboot3.bin, tispl.bin and u-boot.img
In reply to Neha Malcom FrancisSupport has been added for both HS-SE, HS-FS and GP images.
HS-SE:
* tiboot3-j721s2-hs-evm.bin
* tispl.bin
* u-boot.img
HS-FS:
* tiboot3-j721s2-hs-fs-evm.bin
* tispl.bin
* u-boot.img
GP:
* tiboot3.bin --> tiboot3-j721s2-gp-evm.bin
* tispl.bin_unsigned
* u-boot.img_unsigned
It is to be noted that the bootflow followed by J721S2 requires:
tiboot3.bin:
* R5 SPL
* R5 SPL dtbs
* TIFS
* board-cfg
* pm-cfg
* sec-cfg
* rm-cfg
tispl.bin:
* DM
* ATF
* OPTEE
* A72 SPL
* A72 SPL dtbs
u-boot.img:
* A72 U-Boot
* A72 U-Boot dtbs
--- .../arm/dts/k3-am68-sk-base-board-u-boot.dtsi | 2 + arch/arm/dts/k3-j721s2-binman.dtsi | 546 ++++++++++++++++++ .../k3-j721s2-common-proc-board-u-boot.dtsi | 2 + .../dts/k3-j721s2-r5-common-proc-board.dts | 1 + board/ti/j721s2/Kconfig | 2 + 5 files changed, 553 insertions(+) create mode 100644 arch/arm/dts/k3-j721s2-binman.dtsi
arch/arm/dts/k3-am68-sk-base-board-u-boot.dtsi +2 -0
@@ -3,6 +3,8 @@ * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ */ +#include "k3-j721s2-binman.dtsi" + / { chosen { stdout-path = "serial2:115200n8";
arch/arm/dts/k3-j721s2-binman.dtsi new file +546 -0
546 lines not on this page · raw message
arch/arm/dts/k3-j721s2-common-proc-board-u-boot.dtsi +2 -0
@@ -3,6 +3,8 @@ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/ */ +#include "k3-j721s2-binman.dtsi" + / { chosen { stdout-path = "serial2:115200n8";
arch/arm/dts/k3-j721s2-r5-common-proc-board.dts +1 -0
@@ -8,6 +8,7 @@ #include "k3-j721s2-som-p0.dtsi" #include "k3-j721s2-ddr-evm-lp4-4266.dtsi" #include "k3-j721s2-ddr.dtsi" +#include "k3-j721s2-binman.dtsi" / { chosen {
board/ti/j721s2/Kconfig +2 -0
@@ -13,6 +13,7 @@ config TARGET_J721S2_A72_EVM select BOARD_LATE_INIT imply TI_I2C_BOARD_DETECT select SYS_DISABLE_DCACHE_OPS + select BINMAN config TARGET_J721S2_R5_EVM bool "TI K3 based J721S2 EVM running on R5"
@@ -22,6 +23,7 @@ config TARGET_J721S2_R5_EVM select RAM select SPL_RAM select K3_DDRSS + select BINMAN imply SYS_K3_SPL_ATF imply TI_I2C_BOARD_DETECT
Signature · 1 line
2.34.1
PATCH v6 14/23 am62: yaml: Add board configs for AM62
In reply to Neha Malcom FrancisAdded YAML configs for AM62
--- board/ti/am62x/board-cfg.yaml | 36 ++ board/ti/am62x/pm-cfg.yaml | 12 + board/ti/am62x/rm-cfg.yaml | 1088 +++++++++++++++++++++++++++++++++ board/ti/am62x/sec-cfg.yaml | 379 ++++++++++++ 4 files changed, 1515 insertions(+) create mode 100644 board/ti/am62x/board-cfg.yaml create mode 100644 board/ti/am62x/pm-cfg.yaml create mode 100644 board/ti/am62x/rm-cfg.yaml create mode 100644 board/ti/am62x/sec-cfg.yaml
board/ti/am62x/board-cfg.yaml new file +36 -0
@@ -0,0 +1,36 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ +# +# Board configuration for AM62 +# + +--- + +board-cfg: + rev: + boardcfg_abi_maj : 0x0 + boardcfg_abi_min : 0x1 + control: + subhdr: + magic: 0xC1D3 + size: 7 + main_isolation_enable : 0x5A + main_isolation_hostid : 0x2 + secproxy: + subhdr: + magic: 0x1207 + size: 7 + scaling_factor : 0x1 + scaling_profile : 0x1 + disable_main_nav_secure_proxy : 0 + msmc: + subhdr: + magic: 0xA5C3 + size: 5 + msmc_cache_size : 0x0 + debug_cfg: + subhdr: + magic: 0x020C + size: 8 + trace_dst_enables : 0x00 + trace_src_enables : 0x00
board/ti/am62x/pm-cfg.yaml new file +12 -0
@@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ +# +# Power management configuration for AM62 +# + +--- + +pm-cfg: + rev: + boardcfg_abi_maj : 0x0 + boardcfg_abi_min : 0x1
board/ti/am62x/rm-cfg.yaml new file +1088 -0
1,088 lines not on this page · raw message
board/ti/am62x/sec-cfg.yaml new file +379 -0
379 lines not on this page · raw message
Signature · 1 line
2.34.1
PATCH v6 15/23 am625: dts: binman: Package tiboot3.bin, tispl.bin and u-boot.img
In reply to Neha Malcom FrancisSupport added for HS-SE, HS-FS and GP boot binaries for AM62.
HS-SE:
* tiboot3-am62x-hs-evm.bin
* tispl.bin
* u-boot.img
HS-FS:
* tiboot3-am62x-hs-fs-evm.bin
* tispl.bin
* u-boot.img
GP:
* tiboot3.bin --> tiboot3-am62x-gp-evm.bin
* tispl.bin_unsigned
* u-boot.img_unsigned
It is to be noted that the bootflow followed by AM62 requires:
tiboot3.bin:
* R5 SPL
* R5 SPL dtbs
* TIFS
* board-cfg
* pm-cfg
* sec-cfg
* rm-cfg
tispl.bin:
* DM
* ATF
* OPTEE
* A72 SPL
* A72 SPL dtbs
u-boot.img:
* A72 U-Boot
* A72 U-Boot dtbs
--- arch/arm/dts/k3-am625-r5-sk.dts | 1 + arch/arm/dts/k3-am625-sk-binman.dtsi | 463 +++++++++++++++++++++++++++ arch/arm/dts/k3-am625-sk-u-boot.dtsi | 2 + board/ti/am62x/Kconfig | 2 + 4 files changed, 468 insertions(+) create mode 100644 arch/arm/dts/k3-am625-sk-binman.dtsi
arch/arm/dts/k3-am625-r5-sk.dts +1 -0
@@ -9,6 +9,7 @@ #include "k3-am62-ddr.dtsi" #include "k3-am625-sk-u-boot.dtsi" +#include "k3-am625-sk-binman.dtsi" / { aliases {
arch/arm/dts/k3-am625-sk-binman.dtsi new file +463 -0
463 lines not on this page · raw message
arch/arm/dts/k3-am625-sk-u-boot.dtsi +2 -0
@@ -4,6 +4,8 @@ * Copyright (C) 2021-2022 Texas Instruments Incorporated - https://www.ti.com/ */ +#include "k3-am625-sk-binman.dtsi" + / { chosen { stdout-path = "serial2:115200n8";
board/ti/am62x/Kconfig +2 -0
@@ -10,6 +10,7 @@ choice config TARGET_AM625_A53_EVM bool "TI K3 based AM625 EVM running on A53" select ARM64 + select BINMAN config TARGET_AM625_R5_EVM bool "TI K3 based AM625 EVM running on R5"
@@ -19,6 +20,7 @@ config TARGET_AM625_R5_EVM select RAM select SPL_RAM select K3_DDRSS + select BINMAN imply SYS_K3_SPL_ATF endchoice
Signature · 1 line
2.34.1
PATCH v6 16/23 am62a: yaml: Add board configs for AM62ax
In reply to Neha Malcom FrancisAdded YAML configs for AM62ax
--- board/ti/am62ax/board-cfg.yaml | 36 + board/ti/am62ax/pm-cfg.yaml | 12 + board/ti/am62ax/rm-cfg.yaml | 1151 ++++++++++++++++++++++++++++++ board/ti/am62ax/sec-cfg.yaml | 379 ++++++++++ board/ti/am62ax/tifs-rm-cfg.yaml | 1011 ++++++++++++++++++++++++++ 5 files changed, 2589 insertions(+) create mode 100644 board/ti/am62ax/board-cfg.yaml create mode 100644 board/ti/am62ax/pm-cfg.yaml create mode 100644 board/ti/am62ax/rm-cfg.yaml create mode 100644 board/ti/am62ax/sec-cfg.yaml create mode 100644 board/ti/am62ax/tifs-rm-cfg.yaml
board/ti/am62ax/board-cfg.yaml new file +36 -0
@@ -0,0 +1,36 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ +# +# Board configuration for AM62ax +# + +--- + +board-cfg: + rev: + boardcfg_abi_maj : 0x0 + boardcfg_abi_min : 0x1 + control: + subhdr: + magic: 0xC1D3 + size: 7 + main_isolation_enable : 0x5A + main_isolation_hostid : 0x2 + secproxy: + subhdr: + magic: 0x1207 + size: 7 + scaling_factor : 0x1 + scaling_profile : 0x1 + disable_main_nav_secure_proxy : 0 + msmc: + subhdr: + magic: 0xA5C3 + size: 5 + msmc_cache_size : 0x10 + debug_cfg: + subhdr: + magic: 0x020C + size: 8 + trace_dst_enables : 0x00 + trace_src_enables : 0x00
board/ti/am62ax/pm-cfg.yaml new file +12 -0
@@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ +# +# Power management configuration for AM62ax +# + +--- + +pm-cfg: + rev: + boardcfg_abi_maj : 0x0 + boardcfg_abi_min : 0x1
board/ti/am62ax/rm-cfg.yaml new file +1151 -0
1,151 lines not on this page · raw message
board/ti/am62ax/sec-cfg.yaml new file +379 -0
379 lines not on this page · raw message
board/ti/am62ax/tifs-rm-cfg.yaml new file +1011 -0
1,011 lines not on this page · raw message
Signature · 1 line
2.34.1
PATCH v6 17/23 am62a: dts: binman: Package tiboot3.bin, tispl.bin, u-boot.img
In reply to Neha Malcom FrancisSupport added for HS-SE, HS-FS and GP boot binaries for AM62ax.
HS-SE:
* tiboot3-am62ax-hs-evm.bin
* tispl.bin
* u-boot.img
HS-FS:
* tiboot3-am62ax-hs-fs-evm.bin
* tispl.bin
* u-boot.img
GP:
* tiboot3.bin --> tiboot3-am62ax-gp-evm.bin
* tispl.bin_unsigned
* u-boot.img_unsigned
It is to be noted that the bootflow followed by AM62ax requires:
tiboot3.bin:
* R5 SPL
* R5 SPL dtbs
* TIFS
* board-cfg
* pm-cfg
* sec-cfg
* rm-cfg
tispl.bin:
* DM
* ATF
* OPTEE
* A72 SPL
* A72 SPL dtbs
u-boot.img:
* A72 U-Boot
* A72 U-Boot dtbs
--- arch/arm/dts/k3-am62a-sk-binman.dtsi | 466 +++++++++++++++++++++++++++ arch/arm/dts/k3-am62a7-r5-sk.dts | 1 + arch/arm/dts/k3-am62a7-sk.dts | 1 + board/ti/am62ax/Kconfig | 2 + 4 files changed, 470 insertions(+) create mode 100644 arch/arm/dts/k3-am62a-sk-binman.dtsi
arch/arm/dts/k3-am62a-sk-binman.dtsi new file +466 -0
@@ -0,0 +1,466 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +#include "k3-binman.dtsi" + +#ifdef CONFIG_TARGET_AM62A7_R5_EVM + +&rcfg_yaml_tifs { + config = "tifs-rm-cfg.yaml"; +}; + +&binman { + tiboot3-am62ax-hs-evm.bin { + filename = "tiboot3-am62ax-hs-evm.bin"; + ti-secure-rom { + content = <&u_boot_spl>, <&ti_fs_enc>, <&combined_tifs_cfg>, + <&combined_dm_cfg>, <&sysfw_inner_cert>; + combined; + dm-data; + sysfw-inner-cert; + keyfile = "custMpk.pem"; + sw-rev = <1>; + content-sbl = <&u_boot_spl>; + content-sysfw = <&ti_fs_enc>; + content-sysfw-data = <&combined_tifs_cfg>; + content-sysfw-inner-cert = <&sysfw_inner_cert>; + content-dm-data = <&combined_dm_cfg>; + load = <0x43c00000>; + load-sysfw = <0x40000>; + load-sysfw-data = <0x67000>; + load-dm-data = <0x43c3a800>; + }; + u_boot_spl: u-boot-spl { + no-expanded; + }; + ti_fs_enc: ti-fs-enc.bin { + filename = "ti-sysfw/ti-fs-firmware-am62ax-hs-enc.bin"; + type = "blob-ext"; + optional; + }; + combined_tifs_cfg: combined-tifs-cfg.bin { + filename = "combined-tifs-cfg.bin"; + type = "blob-ext"; + }; + sysfw_inner_cert: sysfw-inner-cert { + filename = "ti-sysfw/ti-fs-firmware-am62ax-hs-cert.bin"; + type = "blob-ext"; + optional; + }; + combined_dm_cfg: combined-dm-cfg.bin { + filename = "combined-dm-cfg.bin"; + type = "blob-ext"; + }; + }; +}; + +&binman { + tiboot3-am62ax-hs-fs-evm.bin { + filename = "tiboot3-am62ax-hs-fs-evm.bin"; + symlink = "tiboot3.bin"; + ti-secure-rom { + content = <&u_boot_spl_fs>, <&ti_fs_enc_fs>, <&combined_tifs_cfg_fs>, + <&combined_dm_cfg_fs>, <&sysfw_inner_cert_fs>; + combined; + dm-data; + sysfw-inner-cert; + keyfile = "custMpk.pem"; + sw-rev = <1>; + content-sbl = <&u_boot_spl_fs>; + content-sysfw = <&ti_fs_enc_fs>; + content-sysfw-data = <&combined_tifs_cfg_fs>; + content-sysfw-inner-cert = <&sysfw_inner_cert_fs>; + content-dm-data = <&combined_dm_cfg_fs>; + load = <0x43c00000>; + load-sysfw = <0x40000>; + load-sysfw-data = <0x67000>; + load-dm-data = <0x43c3a800>; + }; + u_boot_spl_fs: u-boot-spl { + no-expanded; + }; + ti_fs_enc_fs: ti-fs-enc.bin { + filename = "ti-sysfw/ti-fs-firmware-am62ax-hs-fs-enc.bin"; + type = "blob-ext"; + optional; + }; + combined_tifs_cfg_fs: combined-tifs-cfg.bin { + filename = "combined-tifs-cfg.bin"; + type = "blob-ext"; + }; + sysfw_inner_cert_fs: sysfw-inner-cert { + filename = "ti-sysfw/ti-fs-firmware-am62ax-hs-fs-cert.bin"; + type = "blob-ext"; + optional; + }; + combined_dm_cfg_fs: combined-dm-cfg.bin { + filename = "combined-dm-cfg.bin"; + type = "blob-ext"; + }; + }; +}; + +&binman { + tiboot3-am62ax-gp-evm.bin { + filename = "tiboot3-am62ax-gp-evm.bin"; + ti-secure-rom { + content = <&u_boot_spl_unsigned>, <&ti_fs_gp>, + <&combined_tifs_cfg_gp>, <&combined_dm_cfg_gp>; + combined; + dm-data; + content-sbl = <&u_boot_spl_unsigned>; + load = <0x43c00000>; + content-sysfw = <&ti_fs_gp>; + load-sysfw = <0x40000>; + content-sysfw-data = <&combined_tifs_cfg_gp>; + load-sysfw-data = <0x67000>; + content-dm-data = <&combined_dm_cfg_gp>; + load-dm-data = <0x43c3a800>; + sw-rev = <1>; + keyfile = "ti-degenerate-key.pem"; + }; + u_boot_spl_unsigned: u-boot-spl { + no-expanded; + }; + ti_fs_gp: ti-fs-gp.bin { + filename = "ti-sysfw/ti-fs-firmware-am62ax-gp.bin"; + type = "blob-ext"; + optional; + }; + combined_tifs_cfg_gp: combined-tifs-cfg-gp.bin { + filename = "combined-tifs-cfg.bin"; + type = "blob-ext"; + }; + combined_dm_cfg_gp: combined-dm-cfg-gp.bin { + filename = "combined-dm-cfg.bin"; + type = "blob-ext"; + }; + }; +}; + +#endif + +#ifdef CONFIG_TARGET_AM62A7_A53_EVM + +#define SPL_NODTB "spl/u-boot-spl-nodtb.bin" +#define SPL_AM62A7_SK_DTB "spl/dts/k3-am62a7-sk.dtb" + +#define UBOOT_NODTB "u-boot-nodtb.bin" +#define AM62A7_SK_DTB "arch/arm/dts/k3-am62a7-sk.dtb" + +&binman { + ti-dm { + filename = "ti-dm.bin"; + blob-ext { + filename = "ti-dm/am62axx/ipc_echo_testb_mcu1_0_release_strip.xer5f"; + }; + }; + ti-spl { + filename = "tispl.bin"; + pad-byte = <0xff>; + + fit { + description = "Configuration to load ATF and SPL"; + #address-cells = <1>; + + images { + + atf { + description = "ARM Trusted Firmware"; + type = "firmware"; + arch = "arm64"; + compression = "none"; + os = "arm-trusted-firmware"; + load = <CONFIG_K3_ATF_LOAD_ADDR>; + entry = <CONFIG_K3_ATF_LOAD_ADDR>; + ti-secure { + content = <&atf>; + keyfile = "custMpk.pem"; + }; + atf: atf-bl31 { + }; + }; + + tee { + description = "OPTEE"; + type = "tee"; + arch = "arm64"; + compression = "none"; + os = "tee"; + load = <0x9e800000>; + entry = <0x9e800000>; + ti-secure { + content = <&tee>; + keyfile = "custMpk.pem"; + }; + tee: tee-os { + }; + }; + + dm { + description = "DM binary"; + type = "firmware"; + arch = "arm32"; + compression = "none"; + os = "DM"; + load = <0x89000000>; + entry = <0x89000000>; + ti-secure { + content = <&dm>; + keyfile = "custMpk.pem"; + }; + dm: blob-ext { + filename = "ti-dm.bin"; + }; + }; + + spl { + description = "SPL (64-bit)"; + type = "standalone"; + os = "U-Boot"; + arch = "arm64"; + compression = "none"; + load = <CONFIG_SPL_TEXT_BASE>; + entry = <CONFIG_SPL_TEXT_BASE>; + ti-secure { + content = <&u_boot_spl_nodtb>; + keyfile = "custMpk.pem"; + }; + u_boot_spl_nodtb: blob-ext { + filename = SPL_NODTB; + }; + }; + + fdt-0 { + description = "k3-am62a7-sk"; + type = "flat_dt"; + arch = "arm"; + compression = "none"; + ti-secure { + content = <&spl_am62a7_sk_dtb>; + keyfile = "custMpk.pem"; + }; + spl_am62a7_sk_dtb: blob-ext { + filename = SPL_AM62A7_SK_DTB; + }; + + }; + + }; + + configurations { + default = "conf-0"; + + conf-0 { + description = "k3-am62a7-sk"; + firmware = "atf"; + loadables = "tee", "dm", "spl"; + fdt = "fdt-0"; + }; + }; + }; + }; +}; + +&binman { + u-boot { + filename = "u-boot.img"; + pad-byte = <0xff>; + + fit { + description = "FIT image with multiple configurations"; + + images { + uboot { + description = "U-Boot for AM62Ax board"; + type = "firmware"; + os = "u-boot"; + arch = "arm"; + compression = "none"; + load = <CONFIG_TEXT_BASE>; + ti-secure { + content = <&u_boot_nodtb>; + keyfile = "custMpk.pem"; + }; + u_boot_nodtb: u-boot-nodtb { + }; + hash { + algo = "crc32"; + }; + }; + + fdt-0 { + description = "k3-am62a7-sk"; + type = "flat_dt"; + arch = "arm"; + compression = "none"; + ti-secure { + content = <&am62a7_sk_dtb>; + keyfile = "custMpk.pem"; + }; + am62a7_sk_dtb: blob-ext { + filename = AM62A7_SK_DTB; + }; + hash { + algo = "crc32"; + }; + }; + }; + + configurations { + default = "conf-0"; + + conf-0 { + description = "k3-am62a7-sk"; + firmware = "uboot"; + loadables = "uboot"; + fdt = "fdt-0"; + }; + + }; + }; + }; +}; + +&binman { + ti-spl_unsigned { + filename = "tispl.bin_unsigned"; + pad-byte = <0xff>; + + fit { + description = "Configuration to load ATF and SPL"; + #address-cells = <1>; + + images { + + atf { + description = "ARM Trusted Firmware"; + type = "firmware"; + arch = "arm64"; + compression = "none"; + os = "arm-trusted-firmware"; + load = <CONFIG_K3_ATF_LOAD_ADDR>; + entry = <CONFIG_K3_ATF_LOAD_ADDR>; + atf-bl31 { + filename = "bl31.bin"; + }; + }; + + tee { + description = "OPTEE"; + type = "tee"; + arch = "arm64"; + compression = "none"; + os = "tee"; + load = <0x9e800000>; + entry = <0x9e800000>; + tee-os { + filename = "tee-pager_v2.bin"; + }; + }; + + dm { + description = "DM binary"; + type = "firmware"; + arch = "arm32"; + compression = "none"; + os = "DM"; + load = <0x89000000>; + entry = <0x89000000>; + blob-ext { + filename = "ti-dm.bin"; + }; + }; + + spl { + description = "SPL (64-bit)"; + type = "standalone"; + os = "U-Boot"; + arch = "arm64"; + compression = "none"; + load = <CONFIG_SPL_TEXT_BASE>; + entry = <CONFIG_SPL_TEXT_BASE>; + blob { + filename = "spl/u-boot-spl-nodtb.bin"; + }; + }; + + fdt-0 { + description = "k3-am62a7-sk"; + type = "flat_dt"; + arch = "arm"; + compression = "none"; + blob { + filename = SPL_AM62A7_SK_DTB; + }; + }; + }; + + configurations { + default = "conf-0"; + + conf-0 { + description = "k3-am62a7-sk"; + firmware = "atf"; + loadables = "tee", "dm", "spl"; + fdt = "fdt-0"; + }; + }; + }; + }; +}; + +&binman { + u-boot_unsigned { + filename = "u-boot.img_unsigned"; + pad-byte = <0xff>; + + fit { + description = "FIT image with multiple configurations"; + + images { + uboot { + description = "U-Boot for AM62Ax board"; + type = "firmware"; + os = "u-boot"; + arch = "arm"; + compression = "none"; + load = <CONFIG_TEXT_BASE>; + blob { + filename = UBOOT_NODTB; + }; + hash { + algo = "crc32"; + }; + }; + + fdt-0 { + description = "k3-am62a7-sk"; + type = "flat_dt"; + arch = "arm"; + compression = "none"; + blob { + filename = AM62A7_SK_DTB; + }; + hash { + algo = "crc32"; + }; + }; + }; + + configurations { + default = "conf-0"; + + conf-0 { + description = "k3-am62a7-sk"; + firmware = "uboot"; + loadables = "uboot"; + fdt = "fdt-0"; + }; + }; + }; + }; +}; +#endif
arch/arm/dts/k3-am62a7-r5-sk.dts +1 -0
@@ -7,6 +7,7 @@ #include "k3-am62a7-sk.dts" #include "k3-am62a-ddr-1866mhz-32bit.dtsi" #include "k3-am62a-ddr.dtsi" +#include "k3-am62a-sk-binman.dtsi" #include "k3-am62a7-sk-u-boot.dtsi"
arch/arm/dts/k3-am62a7-sk.dts +1 -0
@@ -10,6 +10,7 @@ #include <dt-bindings/leds/common.h> #include <dt-bindings/gpio/gpio.h> #include "k3-am62a7.dtsi" +#include "k3-am62a-sk-binman.dtsi" / { compatible = "ti,am62a7-sk", "ti,am62a7";
board/ti/am62ax/Kconfig +2 -0
@@ -10,6 +10,7 @@ choice config TARGET_AM62A7_A53_EVM bool "TI K3 based AM62A7 EVM running on A53" select ARM64 + select BINMAN imply BOARD imply SPL_BOARD imply TI_I2C_BOARD_DETECT
@@ -22,6 +23,7 @@ config TARGET_AM62A7_R5_EVM select RAM select SPL_RAM select K3_DDRSS + select BINMAN imply SYS_K3_SPL_ATF imply TI_I2C_BOARD_DETECT
Signature · 1 line
2.34.1
PATCH v6 18/23 arm: k3-am65x-iot2050: Use binman for tispl.bin for iot2050
In reply to Neha Malcom FrancisMove to using binman to generate tispl.bin which is used to generate the final flash.bin bootloader for iot2050 boards.
--- arch/arm/dts/k3-am65-iot2050-boot-image.dtsi | 76 +++++++++++++++++++- 1 file changed, 74 insertions(+), 2 deletions(-)
arch/arm/dts/k3-am65-iot2050-boot-image.dtsi +74 -2
@@ -26,9 +26,81 @@ missing-msg = "iot2050-seboot"; }; - blob@0x180000 { + fit@0x180000 { offset = <0x180000>; - filename = "tispl.bin"; + pad-byte = <0xff>; + description = "Configuration to load ATF and SPL"; + + images { + atf { + description = "ARM Trusted Firmware"; + type = "firmware"; + arch = "arm64"; + compression = "none"; + os = "arm-trusted-firmware"; + load = <CONFIG_K3_ATF_LOAD_ADDR>; + entry = <CONFIG_K3_ATF_LOAD_ADDR>; + atf: atf-bl31 { + }; + }; + + tee { + description = "OPTEE"; + type = "tee"; + arch = "arm64"; + compression = "none"; + os = "tee"; + load = <0x9e800000>; + entry = <0x9e800000>; + tee: tee-os { + }; + }; + + dm { + description = "DM binary"; + type = "firmware"; + arch = "arm32"; + compression = "none"; + os = "DM"; + load = <0x89000000>; + entry = <0x89000000>; + blob-ext { + filename = "/dev/null"; + }; + }; + + spl { + description = "SPL (64-bit)"; + type = "standalone"; + os = "U-Boot"; + arch = "arm64"; + compression = "none"; + load = <CONFIG_SPL_TEXT_BASE>; + entry = <CONFIG_SPL_TEXT_BASE>; + u_boot_spl_nodtb: blob-ext { + filename = "spl/u-boot-spl-nodtb.bin"; + }; + }; + + fdt-0 { + description = "k3-am65-iot2050-spl.dtb"; + type = "flat_dt"; + arch = "arm"; + compression = "none"; + spl_am65x_evm_dtb: blob-ext { + filename = "spl/dts/k3-am65-iot2050-spl.dtb"; + }; + }; + }; + + configurations { + default = "spl"; + spl { + fdt = "fdt-0"; + firmware = "atf"; + loadables = "tee", "dm", "spl"; + }; + }; }; fit@0x380000 {
Signature · 1 line
2.34.1
Re: [PATCH v6 18/23] arm: k3-am65x-iot2050: Use binman for tispl.bin for iot2050
Quoted 88 lines · Neha Malcom Francis
Move to using binman to generate tispl.bin which is used to generate the final flash.bin bootloader for iot2050 boards.
Signed-off-by Neha Malcom Francis <[email protected]>Cc Jan Kiszka <[email protected]>Reviewed-by Simon Glass <[email protected]>--- arch/arm/dts/k3-am65-iot2050-boot-image.dtsi | 76 +++++++++++++++++++- 1 file changed, 74 insertions(+), 2 deletions(-)arch/arm/dts/k3-am65-iot2050-boot-image.dtsi +67
-2@@ -26,9 +26,81 @@ missing-msg = "iot2050-seboot"; }; - blob@0x180000 { + fit@0x180000 { offset = <0x180000>; - filename = "tispl.bin"; + pad-byte = <0xff>; + description = "Configuration to load ATF and SPL"; + + images { + atf { + description = "ARM Trusted Firmware"; + type = "firmware"; + arch = "arm64"; + compression = "none"; + os = "arm-trusted-firmware"; + load = <CONFIG_K3_ATF_LOAD_ADDR>; + entry = <CONFIG_K3_ATF_LOAD_ADDR>; + atf: atf-bl31 { + }; + }; + + tee { + description = "OPTEE"; + type = "tee"; + arch = "arm64"; + compression = "none"; + os = "tee"; + load = <0x9e800000>; + entry = <0x9e800000>; + tee: tee-os { + }; + }; + + dm { + description = "DM binary"; + type = "firmware"; + arch = "arm32"; + compression = "none"; + os = "DM"; + load = <0x89000000>; + entry = <0x89000000>; + blob-ext { + filename = "/dev/null"; + }; + }; + + spl { + description = "SPL (64-bit)"; + type = "standalone"; + os = "U-Boot"; + arch = "arm64"; + compression = "none"; + load = <CONFIG_SPL_TEXT_BASE>; + entry = <CONFIG_SPL_TEXT_BASE>; + u_boot_spl_nodtb: blob-ext { + filename = "spl/u-boot-spl-nodtb.bin"; + }; + }; + + fdt-0 { + description = "k3-am65-iot2050-spl.dtb"; + type = "flat_dt"; + arch = "arm"; + compression = "none"; + spl_am65x_evm_dtb: blob-ext { + filename = "spl/dts/k3-am65-iot2050-spl.dtb"; + }; + }; + }; + + configurations {
arch/arm/dts/k3-am65-iot2050-boot-image.dtsi line 106
Quoted 10 lines
arch/arm/dts/k3-am65-iot2050-boot-image.dtsi +7
-0+ default = "spl"; + spl { + fdt = "fdt-0"; + firmware = "atf"; + loadables = "tee", "dm", "spl"; + }; + }; }; fit@0x380000 {
You forgot to update tools/iot2050-sign-fw.sh?
Jan
Signature · 2 lines
Siemens AG, Technology Competence Center Embedded Linux
PATCH v6 19/23 k3: tools: config.mk: Update makefile and remove scripts
In reply to Neha Malcom FrancisSince binman is used to package bootloader images for all K3 devices, we do not have to rely on the earlier methods to package them.
Scripts that were used to generate x509 certificate for tiboot3.bin and generate tispl.bin, u-boot.img have been removed.
--- arch/arm/mach-k3/config.mk | 103 --------------- tools/k3_fit_atf.sh | 123 ----------------- tools/k3_gen_x509_cert.sh | 262 ------------------------------------- 3 files changed, 488 deletions(-) delete mode 100644 arch/arm/mach-k3/config.mk delete mode 100755 tools/k3_fit_atf.sh delete mode 100755 tools/k3_gen_x509_cert.sh
arch/arm/mach-k3/config.mk deleted +0 -103
@@ -1,103 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2017-2018 Texas Instruments Incorporated - http://www.ti.com/ -# Lokesh Vutla <[email protected]> - -ifdef CONFIG_SPL_BUILD - -# Openssl is required to generate x509 certificate. -# Error out if openssl is not available. -ifeq ($(shell which openssl),) -$(error "No openssl in $(PATH), consider installing openssl") -endif - -IMAGE_SIZE= $(shell cat $(obj)/u-boot-spl.bin | wc -c) -MAX_SIZE= $(shell printf "%d" $(CONFIG_SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE)) - -ifeq ($(CONFIG_SYS_K3_KEY), "") -KEY="" -# On HS use real key or warn if not available -ifeq ($(CONFIG_TI_SECURE_DEVICE),y) -ifneq ($(wildcard $(TI_SECURE_DEV_PKG)/keys/custMpk.pem),) -KEY=$(TI_SECURE_DEV_PKG)/keys/custMpk.pem -else -$(warning "WARNING: signing key not found. Random key will NOT work on HS hardware!") -endif -endif -else -KEY=$(patsubst "%",$(srctree)/%,$(CONFIG_SYS_K3_KEY)) -endif - -# X509 SWRV default -SWRV = $(CONFIG_K3_X509_SWRV) -# On HS use SECDEV provided software revision or warn if not available -ifeq ($(CONFIG_TI_SECURE_DEVICE),y) -ifneq ($(wildcard $(TI_SECURE_DEV_PKG)/keys/swrv.txt),) -SWRV= $(shell cat $(TI_SECURE_DEV_PKG)/keys/swrv.txt) -else -$(warning "WARNING: Software revision file not found. Default may not work on HS hardware.") -endif -endif - -# tiboot3.bin is mandated by ROM and ROM only supports R5 boot. -# So restrict tiboot3.bin creation for CPU_V7R. -ifdef CONFIG_CPU_V7R -image_check: $(obj)/u-boot-spl.bin FORCE - @if [ $(IMAGE_SIZE) -gt $(MAX_SIZE) ]; then \ - echo "===============================================" >&2; \ - echo "ERROR: Final Image too big. " >&2; \ - echo "$< size = $(IMAGE_SIZE), max size = $(MAX_SIZE)" >&2; \ - echo "===============================================" >&2; \ - exit 1; \ - fi - -tiboot3.bin: image_check FORCE - $(srctree)/tools/k3_gen_x509_cert.sh -c 16 -b $(obj)/u-boot-spl.bin \ - -o $@ -l $(CONFIG_SPL_TEXT_BASE) -r $(SWRV) -k $(KEY) - -INPUTS-y += tiboot3.bin -endif - -ifdef CONFIG_ARM64 - -ifeq ($(CONFIG_SOC_K3_J721E),) -export DM := /dev/null -endif - -ifeq ($(CONFIG_TI_SECURE_DEVICE),y) -SPL_ITS := u-boot-spl-k3_HS.its -$(SPL_ITS): export IS_HS=1 -INPUTS-y += tispl.bin_HS -INPUTS-y += tispl.bin -tispl.bin: $(obj)/u-boot-spl-nodtb.bin_HS $(patsubst %,$(obj)/dts/%.dtb_HS,$(subst ",,$(CONFIG_SPL_OF_LIST))) -else -SPL_ITS := u-boot-spl-k3.its -INPUTS-y += tispl.bin -endif - -ifeq ($(CONFIG_SPL_OF_LIST),) -LIST_OF_DTB := $(CONFIG_DEFAULT_DEVICE_TREE) -else -LIST_OF_DTB := $(CONFIG_SPL_OF_LIST) -endif - -quiet_cmd_k3_mkits = MKITS $@ -cmd_k3_mkits = \ - $(srctree)/tools/k3_fit_atf.sh \ - $(CONFIG_K3_ATF_LOAD_ADDR) \ - $(patsubst %,$(obj)/dts/%.dtb,$(subst ",,$(LIST_OF_DTB))) > $@ - -$(SPL_ITS): FORCE - $(call cmd,k3_mkits) -endif - -else - -ifeq ($(CONFIG_TI_SECURE_DEVICE),y) -INPUTS-y += u-boot.img_HS -else -INPUTS-y += u-boot.img -endif -endif - -include $(srctree)/arch/arm/mach-k3/config_secure.mk
tools/k3_fit_atf.sh deleted +0 -123
123 lines not on this page · raw message
tools/k3_gen_x509_cert.sh deleted +0 -262
262 lines not on this page · raw message
Signature · 1 line
2.34.1
PATCH v6 20/23 doc: board: ti: Update documentation for binman flow
In reply to Neha Malcom FrancisEarlier documentation specified builds for generating bootloader images using an external TI repository k3-image-gen and core-secdev-k3. Modify this to using the binman flow so that user understands how to build the final boot images.
--- doc/board/ti/am62x_sk.rst | 54 +++++++++---------- doc/board/ti/j7200_evm.rst | 55 +++++++++---------- doc/board/ti/j721e_evm.rst | 58 +++++++++----------- doc/board/ti/k3.rst | 107 +++++++++++++------------------------ 4 files changed, 113 insertions(+), 161 deletions(-)
doc/board/ti/am62x_sk.rst +26 -28
@@ -90,9 +90,9 @@ Below is the pictorial representation of boot flow: | | |----------|-----------------------|---->| Reset rls | | | | | | | +-----------+ | | | TIFS | | | : | - | |Services| | | +-----------+ | - | | |<---------|-----------------------|---->|*ATF/OPTEE*| | - | | | | | +-----------+ | + | |Services| | | +------------+ | + | | |<---------|-----------------------|---->|*TF-A/OPTEE*| | + | | | | | +------------+ | | | | | | : | | | | | | +-----------+ | | | |<---------|-----------------------|---->| *A53 SPL* | |
@@ -115,59 +115,57 @@ Below is the pictorial representation of boot flow: Sources: -------- -1. SYSFW: - Tree: git://git.ti.com/k3-image-gen/k3-image-gen.git - Branch: master - -2. ATF: - Tree: https://github.com/ARM-software/arm-trusted-firmware.git +1. Trusted Firmware-A: + Tree: https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/ Branch: master -3. OPTEE: +2. OPTEE: Tree: https://github.com/OP-TEE/optee_os.git Branch: master -4. U-Boot: +3. U-Boot: Tree: https://source.denx.de/u-boot/u-boot Branch: master -5. TI Linux Firmware: +4. TI Linux Firmware: Tree: git://git.ti.com/processor-firmware/ti-linux-firmware.git Branch: ti-linux-firmware Build procedure: ---------------- -1. ATF: +1. Trusted Firmware-A: -.. code-block:: text +.. code-block:: bash - $ make CROSS_COMPILE=aarch64-none-linux-gnu- ARCH=aarch64 PLAT=k3 TARGET_BOARD=lite SPD=opteed + $ make CROSS_COMPILE=aarch64-none-linux-gnu- ARCH=aarch64 PLAT=k3 \ + TARGET_BOARD=lite SPD=opteed 2. OPTEE: -.. code-block:: text +.. code-block:: bash - $ make PLATFORM=k3 CFG_ARM64_core=y CROSS_COMPILE=arm-none-linux-gnueabihf- CROSS_COMPILE64=aarch64-none-linux-gnu- + $ make PLATFORM=k3 CFG_ARM64_core=y CROSS_COMPILE=arm-none-linux-gnueabihf- \ + CROSS_COMPILE64=aarch64-none-linux-gnu- 3. U-Boot: * 3.1 R5: -.. code-block:: text +.. code-block:: bash - $ make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabihf- am62x_evm_r5_defconfig O=/tmp/r5 - $ make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabihf- O=/tmp/r5 - $ cd <k3-image-gen> - $ make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabihf- SOC=am62x SBL=/tmp/r5/spl/u-boot-spl.bin SYSFW_PATH=<path to ti-linux-firmware>/ti-sysfw/ti-fs-firmware-am62x-gp.bin - -Use the tiboot3.bin generated from last command + $ make ARCH=arm am62x_evm_r5_defconfig + $ make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabihf- \ + BINMAN_INDIRS=<path/to/ti-linux-firmware> * 3.2 A53: -.. code-block:: text +.. code-block:: bash - $ make ARCH=arm CROSS_COMPILE=aarch64-none-linux-gnu- am62x_evm_a53_defconfig O=/tmp/a53 - $ make ARCH=arm CROSS_COMPILE=aarch64-none-linux-gnu- ATF=<path to ATF dir>/build/k3/lite/release/bl31.bin TEE=<path to OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin DM=<path to ti-linux-firmware>/ti-dm/am62xx/ipc_echo_testb_mcu1_0_release_strip.xer5f O=/tmp/a53 + $ make ARCH=arm am62x_evm_a53_defconfig + $ make ARCH=arm CROSS_COMPILE=aarch64-none-linux-gnu- \ + BL31=<path/to/trusted-firmware-a/dir>/build/k3/lite/release/bl31.bin \ + TEE=<path/to/optee_os/dir>/out/arm-plat-k3/core/tee-raw.bin \ + BINMAN_INDIRS=<path/to/ti-linux-firmware> Target Images --------------
@@ -214,7 +212,7 @@ Image formats: | FIT HEADER | | +-------------------+ | | | | | - | | A53 ATF | | + | | A53 TF-A | | | +-------------------+ | | | | | | | A53 OPTEE | |
doc/board/ti/j7200_evm.rst +24 -31
102 lines not on this page · raw message
doc/board/ti/j721e_evm.rst +26 -32
109 lines not on this page · raw message
doc/board/ti/k3.rst +37 -70
189 lines not on this page · raw message
Signature · 1 line
2.34.1
PATCH v6 21/23 binman: Overwrite symlink if it already exists
In reply to Neha Malcom FrancisFrom: Andrew Davis <[email protected]>
Without this re-building will fail with an error when trying to create the symlink for the second time with an already exists error.
--- tools/binman/ftest.py | 18 ++++++++++++++++-- tools/binman/image.py | 2 ++ 2 files changed, 18 insertions(+), 2 deletions(-)
tools/binman/ftest.py +16 -2
@@ -353,7 +353,7 @@ class TestFunctional(unittest.TestCase): use_expanded=False, verbosity=None, allow_missing=False, allow_fake_blobs=False, extra_indirs=None, threads=None, test_section_timeout=False, update_fdt_in_elf=None, - force_missing_bintools='', ignore_missing=False): + force_missing_bintools='', ignore_missing=False, output_dir=None): """Run binman with a given test file Args:
@@ -384,6 +384,7 @@ class TestFunctional(unittest.TestCase): update_fdt_in_elf: Value to pass with --update-fdt-in-elf=xxx force_missing_tools (str): comma-separated list of bintools to regard as missing + output_dir: Specific output directory to use for image using -O Returns: int return code, 0 on success
@@ -430,6 +431,8 @@ class TestFunctional(unittest.TestCase): if extra_indirs: for indir in extra_indirs: args += ['-I', indir] + if output_dir: + args += ['-O', output_dir] return self._DoBinman(*args) def _SetupDtb(self, fname, outfile='u-boot.dtb'):
@@ -6113,7 +6116,7 @@ fdt fdtmap Extract the devicetree blob from the fdtmap str(e.exception)) def testSymlink(self): - """Test that image files can be named""" + """Test that image files can be symlinked""" retcode = self._DoTestFile('259_symlink.dts', debug=True, map=True) self.assertEqual(0, retcode) image = control.images['test_image']
@@ -6122,6 +6125,17 @@ fdt fdtmap Extract the devicetree blob from the fdtmap self.assertTrue(os.path.islink(sname)) self.assertEqual(os.readlink(sname), fname) + def testSymlinkOverwrite(self): + """Test that symlinked images can be overwritten""" + testdir = TestFunctional._MakeInputDir('symlinktest') + self._DoTestFile('259_symlink.dts', debug=True, map=True, output_dir=testdir) + # build the same image again in the same directory so that existing symlink is present + self._DoTestFile('259_symlink.dts', debug=True, map=True, output_dir=testdir) + fname = tools.get_output_filename('test_image.bin') + sname = tools.get_output_filename('symlink_to_test.bin') + self.assertTrue(os.path.islink(sname)) + self.assertEqual(os.readlink(sname), fname) + def testSymbolsElf(self): """Test binman can assign symbols embedded in an ELF file""" if not elf.ELF_TOOLS:
tools/binman/image.py +2 -0
@@ -182,6 +182,8 @@ class Image(section.Entry_section): # Create symlink to file if symlink given if self._symlink is not None: sname = tools.get_output_filename(self._symlink) + if os.path.islink(sname): + os.remove(sname) os.symlink(fname, sname) def WriteMap(self):
Signature · 1 line
2.34.1
Re: [PATCH v6 21/23] binman: Overwrite symlink if it already exists
Quoted 6 lines · Neha Malcom Francis
From: Andrew Davis <[email protected]>
Without this re-building will fail with an error when trying to create the symlink for the second time with an already exists error.
Quoted 8 lines
Signed-off-by Andrew Davis <[email protected]>[[email protected]: Added support for test output dir and testcase]Signed-off-by Neha Malcom Francis <[email protected]>--- tools/binman/ftest.py | 18 ++++++++++++++++-- tools/binman/image.py | 2 ++ 2 files changed, 18 insertions(+), 2 deletions(-)
PATCH v6 22/23 buildman: Create a requirements.txt file
In reply to Neha Malcom FrancisFrom: Tom Rini <[email protected]>
At this point, buildman requires a few different modules and so we need a requirements.txt to track what modules are needed.
--- tools/buildman/requirements.txt | 2 ++ 1 file changed, 2 insertions(+) create mode 100644 tools/buildman/requirements.txt
tools/buildman/requirements.txt new file +2 -0
@@ -0,0 +1,2 @@ +jsonschema==4.17.3 +pyyaml==6.0
Signature · 1 line
2.34.1
PATCH v6 23/23 CI: Make use of buildman requirements.txt
In reply to Neha Malcom FrancisFrom: Tom Rini <[email protected]>
Now that buildman has a requirements.txt file we need to make use of it.
--- .azure-pipelines.yml | 4 ++++ .gitlab-ci.yml | 4 ++++ 2 files changed, 8 insertions(+)
.azure-pipelines.yml +4 -0
@@ -162,6 +162,7 @@ stages: virtualenv -p /usr/bin/python3 /tmp/venv . /tmp/venv/bin/activate pip install -r test/py/requirements.txt + pip install -r tools/buildman/requirements.txt export UBOOT_TRAVIS_BUILD_DIR=/tmp/sandbox_spl export PYTHONPATH=${UBOOT_TRAVIS_BUILD_DIR}/scripts/dtc/pylibfdt export PATH=${UBOOT_TRAVIS_BUILD_DIR}/scripts/dtc:${PATH}
@@ -209,6 +210,7 @@ stages: git config --global --add safe.directory $(work_dir) export USER=azure pip install -r test/py/requirements.txt + pip install -r tools/buildman/requirements.txt pip install asteval pylint==2.12.2 pyopenssl export PATH=${PATH}:~/.local/bin echo "[MASTER]" >> .pylintrc
@@ -404,6 +406,7 @@ stages: if [ -n "${BUILD_ENV}" ]; then export ${BUILD_ENV}; fi + pip install -r tools/buildman/requirements.txt tools/buildman/buildman -o ${UBOOT_TRAVIS_BUILD_DIR} -w -E -W -e --board ${TEST_PY_BD} ${OVERRIDE} cp ~/grub_x86.efi ${UBOOT_TRAVIS_BUILD_DIR}/ cp ~/grub_x64.efi ${UBOOT_TRAVIS_BUILD_DIR}/
@@ -583,6 +586,7 @@ stages: # make environment variables available as tests are running inside a container export BUILDMAN="${BUILDMAN}" git config --global --add safe.directory ${WORK_DIR} + pip install -r tools/buildman/requirements.txt EOF cat << "EOF" >> build.sh if [[ "${BUILDMAN}" != "" ]]; then
.gitlab-ci.yml +4 -0
@@ -97,6 +97,7 @@ build all 32bit ARM platforms: script: - ret=0; git config --global --add safe.directory "${CI_PROJECT_DIR}"; + pip install -r tools/buildman/requirements.txt; ./tools/buildman/buildman -o /tmp -PEWM arm -x aarch64 || ret=$?; if [[ $ret -ne 0 ]]; then ./tools/buildman/buildman -o /tmp -seP;
@@ -110,6 +111,7 @@ build all 64bit ARM platforms: - . /tmp/venv/bin/activate - ret=0; git config --global --add safe.directory "${CI_PROJECT_DIR}"; + pip install -r tools/buildman/requirements.txt; ./tools/buildman/buildman -o /tmp -PEWM aarch64 || ret=$?; if [[ $ret -ne 0 ]]; then ./tools/buildman/buildman -o /tmp -seP;
@@ -208,6 +210,7 @@ Run binman, buildman, dtoc, Kconfig and patman testsuites: virtualenv -p /usr/bin/python3 /tmp/venv; . /tmp/venv/bin/activate; pip install -r test/py/requirements.txt; + pip install -r tools/buildman/requirements.txt; export UBOOT_TRAVIS_BUILD_DIR=/tmp/sandbox_spl; export PYTHONPATH="${UBOOT_TRAVIS_BUILD_DIR}/scripts/dtc/pylibfdt"; export PATH="${UBOOT_TRAVIS_BUILD_DIR}/scripts/dtc:${PATH}";
@@ -240,6 +243,7 @@ Run pylint: script: - git config --global --add safe.directory "${CI_PROJECT_DIR}" - pip install -r test/py/requirements.txt + - pip install -r tools/buildman/requirements.txt - pip install asteval pylint==2.12.2 pyopenssl - export PATH=${PATH}:~/.local/bin - echo "[MASTER]" >> .pylintrc
Signature · 1 line
2.34.1