Skip to contentSkip to conversation

Support x2APIC mode with TCG accelerator

PATCH Superseded Bui Quang Minh 3 participants 11 messages Jul 15, 2023 – Jul 26, 2023

v6 of 12 Superseded Latest is v12 →

lore
Share & tools
lore
#0 lore raw

v6 cover Support x2APIC mode with TCG accelerator

Hi everyone,

This series implements x2APIC mode in userspace local APIC and the RDMSR/WRMSR helper to access x2APIC registers in x2APIC mode. Intel iommu and AMD iommu are adjusted to support x2APIC interrupt remapping. With this series, we can now boot Linux kernel into x2APIC mode with TCG accelerator using either Intel or AMD iommu.

Testing to boot my own built Linux 6.3.0-rc2, the kernel successfully boot with enabled x2APIC and can enumerate CPU with APIC ID 257

Using Intel IOMMU

qemu/build/qemu-system-x86_64 \
-smp 2,maxcpus=260 \
-cpu qemu64,x2apic=on \
-machine q35 \
-device intel-iommu,intremap=on,eim=on \
-device qemu64-x86_64-cpu,x2apic=on,core-id=257,socket-id=0,thread-id=0 \
-m 2G \
-kernel $KERNEL_DIR \
-append "nokaslr console=ttyS0 root=/dev/sda earlyprintk=serial net.ifnames=0" \
-drive file=$IMAGE_DIR,format=raw \
-nographic \
-s

Using AMD IOMMU

qemu/build/qemu-system-x86_64 \
-smp 2,maxcpus=260 \
-cpu qemu64,x2apic=on \
-machine q35 \
-device amd-iommu,intremap=on,xtsup=on \
-device qemu64-x86_64-cpu,x2apic=on,core-id=257,socket-id=0,thread-id=0 \
-m 2G \
-kernel $KERNEL_DIR \
-append "nokaslr console=ttyS0 root=/dev/sda earlyprintk=serial net.ifnames=0" \
-drive file=$IMAGE_DIR,format=raw \
-nographic \
-s

Testing the emulated userspace APIC with kvm-unit-tests, disable test device with this patch

lib/x86/fwcfg.c +1 -0
index 1734afb..f56fe1c 100644
@@ -27,6 +27,7 @@ static void read_cfg_override(void)
 
        if ((str = getenv("TEST_DEVICE")))
                no_test_device = !atol(str);
+       no_test_device = true;
 
        if ((str = getenv("MEMLIMIT")))
                fw_override[FW_CFG_MAX_RAM] = atol(str) * 1024 * 1024;

~ env QEMU=/home/minh/Desktop/oss/qemu/build/qemu-system-x86_64 ACCEL=tcg \
./run_tests.sh -v -g apic

TESTNAME=apic-split TIMEOUT=90s ACCEL=tcg ./x86/run x86/apic.flat -smp 2 -cpu qemu64,+x2apic,+tsc-deadline -machine kernel_irqchip=split FAIL apic-split (54 tests, 8 unexpected failures, 1 skipped) TESTNAME=ioapic-split TIMEOUT=90s ACCEL=tcg ./x86/run x86/ioapic.flat -smp 1 -cpu qemu64 -machine kernel_irqchip=split PASS ioapic-split (19 tests) TESTNAME=x2apic TIMEOUT=30 ACCEL=tcg ./x86/run x86/apic.flat -smp 2 -cpu qemu64,+x2apic,+tsc-deadline FAIL x2apic (54 tests, 8 unexpected failures, 1 skipped) TESTNAME=xapic TIMEOUT=60 ACCEL=tcg ./x86/run x86/apic.flat -smp 2 -cpu qemu64,-x2apic,+tsc-deadline -machine pit=off FAIL xapic (43 tests, 6 unexpected failures, 2 skipped)

FAIL: apic_disable: *0xfee00030: 50014
FAIL: apic_disable: *0xfee00080: f0
FAIL: apic_disable: *0xfee00030: 50014
FAIL: apic_disable: *0xfee00080: f0
FAIL: apicbase: relocate apic

These errors are because we don't disable MMIO region when switching to x2APIC and don't support relocate MMIO region yet. This is a problem because, MMIO region is the same for all CPUs, in order to support these we need to figure out how to allocate and manage different MMIO regions for each CPUs. This can be an improvement in the future.

FAIL: nmi-after-sti
FAIL: multiple nmi

These errors are in the way we handle CPU_INTERRUPT_NMI in core TCG.

FAIL: TMCCT should stay at zero

This error is related to APIC timer which should be addressed in separate patch.

Version 6 changes,
- Patch 5:
+ Make all places use the amdvi_extended_feature_register to get extended feature register

Version 5 changes,
- Patch 3:
+ Rebase to master and fix conflict
- Patch 5:
+ Create a helper function to get amdvi extended feature register instead of storing it in AMDVIState

Version 4 changes,
- Patch 5:
+ Instead of replacing IVHD type 0x10 with type 0x11, export both types for backward compatibility with old guest operating system
+ Flip the xtsup feature check condition in amdvi_int_remap_ga for readability

Version 3 changes,
- Patch 2:
+ Allow APIC ID > 255 only when x2APIC feature is supported on CPU
+ Make physical destination mode IPI which has destination id 0xffffffff a broadcast to xAPIC CPUs
+ Make cluster address 0xf in cluster model of xAPIC logical destination mode a broadcast to all clusters
+ Create new extended_log_dest to store APIC_LDR information in x2APIC instead of extending log_dest for backward compatibility in vmstate

Version 2 changes,
- Add support for APIC ID larger than 255
- Adjust AMD iommu for x2APIC suuport
- Reorganize and split patch 1,2 into patch 1,2,3 in version 2

Thanks,
Quang Minh.

Bui Quang Minh (5):
i386/tcg: implement x2APIC registers MSR access
apic: add support for x2APIC mode
apic, i386/tcg: add x2apic transitions
intel_iommu: allow Extended Interrupt Mode when using userspace APIC
amd_iommu: report x2APIC support to the operating system

 hw/i386/acpi-build.c                 | 129 +++++----
 hw/i386/amd_iommu.c                  |  29 +-
 hw/i386/amd_iommu.h                  |  16 +-
 hw/i386/intel_iommu.c                |  11 -
 hw/i386/x86.c                        |   8 +-
 hw/intc/apic.c                       | 395 +++++++++++++++++++++------
 hw/intc/apic_common.c                |  16 +-
 hw/intc/trace-events                 |   4 +-
 include/hw/i386/apic.h               |   6 +-
 include/hw/i386/apic_internal.h      |   7 +-
 target/i386/cpu-sysemu.c             |  18 +-
 target/i386/cpu.c                    |   8 +-
 target/i386/cpu.h                    |   9 +
 target/i386/tcg/sysemu/misc_helper.c |  31 +++
 14 files changed, 510 insertions(+), 177 deletions(-)
Signature · 1 line
2.25.1
#1 lore raw

PATCH v6 1/5 i386/tcg: implement x2APIC registers MSR access

This commit refactors apic_mem_read/write to support both MMIO access in xAPIC and MSR access in x2APIC.

---
 hw/intc/apic.c                       | 79 ++++++++++++++++++----------
 hw/intc/trace-events                 |  4 +-
 include/hw/i386/apic.h               |  3 ++
 target/i386/cpu.h                    |  3 ++
 target/i386/tcg/sysemu/misc_helper.c | 27 ++++++++++
 5 files changed, 86 insertions(+), 30 deletions(-)
hw/intc/apic.c +51 -28
index ac3d47d231..cb8c20de93 100644
@@ -288,6 +288,13 @@ void apic_deliver_irq(uint8_t dest, uint8_t dest_mode, uint8_t delivery_mode,
     apic_bus_deliver(deliver_bitmask, delivery_mode, vector_num, trigger_mode);
 }
 
+bool is_x2apic_mode(DeviceState *dev)
+{
+    APICCommonState *s = APIC(dev);
+
+    return s->apicbase & MSR_IA32_APICBASE_EXTD;
+}
+
 static void apic_set_base(APICCommonState *s, uint64_t val)
 {
     s->apicbase = (val & 0xfffff000) |
@@ -636,16 +643,11 @@ static void apic_timer(void *opaque)
     apic_timer_update(s, s->next_time);
 }
 
-static uint64_t apic_mem_read(void *opaque, hwaddr addr, unsigned size)
+uint64_t apic_register_read(int index)
 {
     DeviceState *dev;
     APICCommonState *s;
-    uint32_t val;
-    int index;
-
-    if (size < 4) {
-        return 0;
-    }
+    uint64_t val;
 
     dev = cpu_get_current_apic();
     if (!dev) {
@@ -653,7 +655,6 @@ static uint64_t apic_mem_read(void *opaque, hwaddr addr, unsigned size)
     }
     s = APIC(dev);
 
-    index = (addr >> 4) & 0xff;
     switch(index) {
     case 0x02: /* id */
         val = s->id << 24;
@@ -720,7 +721,23 @@ static uint64_t apic_mem_read(void *opaque, hwaddr addr, unsigned size)
         val = 0;
         break;
     }
-    trace_apic_mem_readl(addr, val);
+
+    trace_apic_register_read(index, val);
+    return val;
+}
+
+static uint64_t apic_mem_read(void *opaque, hwaddr addr, unsigned size)
+{
+    uint32_t val;
+    int index;
+
+    if (size < 4) {
+        return 0;
+    }
+
+    index = (addr >> 4) & 0xff;
+    val = (uint32_t)apic_register_read(index);
+
     return val;
 }
 
@@ -737,27 +754,10 @@ static void apic_send_msi(MSIMessage *msi)
     apic_deliver_irq(dest, dest_mode, delivery, vector, trigger_mode);
 }
 
-static void apic_mem_write(void *opaque, hwaddr addr, uint64_t val,
-                           unsigned size)
+void apic_register_write(int index, uint64_t val)
 {
     DeviceState *dev;
     APICCommonState *s;
-    int index = (addr >> 4) & 0xff;
-
-    if (size < 4) {
-        return;
-    }
-
-    if (addr > 0xfff || !index) {
-        /* MSI and MMIO APIC are at the same memory location,
-         * but actually not on the global bus: MSI is on PCI bus
-         * APIC is connected directly to the CPU.
-         * Mapping them on the global bus happens to work because
-         * MSI registers are reserved in APIC MMIO and vice versa. */
-        MSIMessage msi = { .address = addr, .data = val };
-        apic_send_msi(&msi);
-        return;
-    }
 
     dev = cpu_get_current_apic();
     if (!dev) {
@@ -765,7 +765,7 @@ static void apic_mem_write(void *opaque, hwaddr addr, uint64_t val,
     }
     s = APIC(dev);
 
-    trace_apic_mem_writel(addr, val);
+    trace_apic_register_write(index, val);
 
     switch(index) {
     case 0x02:
@@ -843,6 +843,29 @@ static void apic_mem_write(void *opaque, hwaddr addr, uint64_t val,
     }
 }
 
+static void apic_mem_write(void *opaque, hwaddr addr, uint64_t val,
+                           unsigned size)
+{
+    int index = (addr >> 4) & 0xff;
+
+    if (size < 4) {
+        return;
+    }
+
+    if (addr > 0xfff || !index) {
+        /* MSI and MMIO APIC are at the same memory location,
+         * but actually not on the global bus: MSI is on PCI bus
+         * APIC is connected directly to the CPU.
+         * Mapping them on the global bus happens to work because
+         * MSI registers are reserved in APIC MMIO and vice versa. */
+        MSIMessage msi = { .address = addr, .data = val };
+        apic_send_msi(&msi);
+        return;
+    }
+
+    apic_register_write(index, val);
+}
+
 static void apic_pre_save(APICCommonState *s)
 {
     apic_sync_vapic(s, SYNC_FROM_VAPIC);
hw/intc/trace-events +2 -2
index 36ff71f947..1ef29d0256 100644
@@ -14,8 +14,8 @@ cpu_get_apic_base(uint64_t val) "0x%016"PRIx64
 # apic.c
 apic_local_deliver(int vector, uint32_t lvt) "vector %d delivery mode %d"
 apic_deliver_irq(uint8_t dest, uint8_t dest_mode, uint8_t delivery_mode, uint8_t vector_num, uint8_t trigger_mode) "dest %d dest_mode %d delivery_mode %d vector %d trigger_mode %d"
-apic_mem_readl(uint64_t addr, uint32_t val)  "0x%"PRIx64" = 0x%08x"
-apic_mem_writel(uint64_t addr, uint32_t val) "0x%"PRIx64" = 0x%08x"
+apic_register_read(uint8_t reg, uint64_t val) "register 0x%02x = 0x%"PRIx64
+apic_register_write(uint8_t reg, uint64_t val) "register 0x%02x = 0x%"PRIx64
 
 # ioapic.c
 ioapic_set_remote_irr(int n) "set remote irr for pin %d"
include/hw/i386/apic.h +3 -0
index bdc15a7a73..2cebeb4faf 100644
@@ -18,6 +18,9 @@ void apic_sipi(DeviceState *s);
 void apic_poll_irq(DeviceState *d);
 void apic_designate_bsp(DeviceState *d, bool bsp);
 int apic_get_highest_priority_irr(DeviceState *dev);
+uint64_t apic_register_read(int index);
+void apic_register_write(int index, uint64_t val);
+bool is_x2apic_mode(DeviceState *d);
 
 /* pc.c */
 DeviceState *cpu_get_current_apic(void);
target/i386/cpu.h +3 -0
index e0771a1043..7252a5cdeb 100644
@@ -545,6 +545,9 @@ typedef enum X86Seg {
 #define MSR_IA32_VMX_TRUE_ENTRY_CTLS     0x00000490
 #define MSR_IA32_VMX_VMFUNC             0x00000491
 
+#define MSR_APIC_START                  0x00000800
+#define MSR_APIC_END                    0x000008ff
+
 #define XSTATE_FP_BIT                   0
 #define XSTATE_SSE_BIT                  1
 #define XSTATE_YMM_BIT                  2
target/i386/tcg/sysemu/misc_helper.c +27 -0
index e1528b7f80..1fce2076a3 100644
@@ -25,6 +25,7 @@
 #include "exec/address-spaces.h"
 #include "exec/exec-all.h"
 #include "tcg/helper-tcg.h"
+#include "hw/i386/apic.h"
 
 void helper_outb(CPUX86State *env, uint32_t port, uint32_t data)
 {
@@ -289,6 +290,19 @@ void helper_wrmsr(CPUX86State *env)
         env->msr_bndcfgs = val;
         cpu_sync_bndcs_hflags(env);
         break;
+    case MSR_APIC_START ... MSR_APIC_END: {
+        int index = (uint32_t)env->regs[R_ECX] - MSR_APIC_START;
+
+        if (!is_x2apic_mode(env_archcpu(env)->apic_state)) {
+            goto error;
+        }
+
+        qemu_mutex_lock_iothread();
+        apic_register_write(index, val);
+        qemu_mutex_unlock_iothread();
+
+        break;
+    }
     default:
         if ((uint32_t)env->regs[R_ECX] >= MSR_MC0_CTL
             && (uint32_t)env->regs[R_ECX] < MSR_MC0_CTL +
@@ -455,6 +469,19 @@ void helper_rdmsr(CPUX86State *env)
         val = (cs->nr_threads * cs->nr_cores) | (cs->nr_cores << 16);
         break;
     }
+    case MSR_APIC_START ... MSR_APIC_END: {
+        int index = (uint32_t)env->regs[R_ECX] - MSR_APIC_START;
+
+        if (!is_x2apic_mode(env_archcpu(env)->apic_state)) {
+            raise_exception_ra(env, EXCP0D_GPF, GETPC());
+        }
+
+        qemu_mutex_lock_iothread();
+        val = apic_register_read(index);
+        qemu_mutex_unlock_iothread();
+
+        break;
+    }
     default:
         if ((uint32_t)env->regs[R_ECX] >= MSR_MC0_CTL
             && (uint32_t)env->regs[R_ECX] < MSR_MC0_CTL +
Signature · 1 line
2.25.1
#2 lore raw

PATCH v6 2/5 apic: add support for x2APIC mode

In reply to Bui Quang Minh

This commit extends the APIC ID to 32-bit long and remove the 255 max APIC ID limit in userspace APIC. The array that manages local APICs is now dynamically allocated based on the max APIC ID of created x86 machine. Also, new x2APIC IPI destination determination scheme, self IPI and x2APIC mode register access are supported.

---
 hw/i386/x86.c                   |   8 +-
 hw/intc/apic.c                  | 266 ++++++++++++++++++++++++--------
 hw/intc/apic_common.c           |   9 ++
 include/hw/i386/apic.h          |   3 +-
 include/hw/i386/apic_internal.h |   7 +-
 target/i386/cpu-sysemu.c        |   8 +-
 6 files changed, 231 insertions(+), 70 deletions(-)
hw/i386/x86.c +6 -2
index a88a126123..8b70f0a6ea 100644
@@ -132,11 +132,11 @@ void x86_cpus_init(X86MachineState *x86ms, int default_cpu_version)
      * Can we support APIC ID 255 or higher?
      *
      * Under Xen: yes.
-     * With userspace emulated lapic: no
+     * With userspace emulated lapic: checked later in apic_common_set_id.
      * With KVM's in-kernel lapic: only if X2APIC API is enabled.
      */
     if (x86ms->apic_id_limit > 255 && !xen_enabled() &&
-        (!kvm_irqchip_in_kernel() || !kvm_enable_x2apic())) {
+        kvm_irqchip_in_kernel() && !kvm_enable_x2apic()) {
         error_report("current -smp configuration requires kernel "
                      "irqchip and X2APIC API support.");
         exit(EXIT_FAILURE);
@@ -146,6 +146,10 @@ void x86_cpus_init(X86MachineState *x86ms, int default_cpu_version)
         kvm_set_max_apic_id(x86ms->apic_id_limit);
     }
 
+    if (!kvm_irqchip_in_kernel()) {
+        apic_set_max_apic_id(x86ms->apic_id_limit);
+    }
+
     possible_cpus = mc->possible_cpu_arch_ids(ms);
     for (i = 0; i < ms->smp.cpus; i++) {
         x86_cpu_new(x86ms, possible_cpus->cpus[i].arch_id, &error_fatal);
hw/intc/apic.c +203 -63

430 lines not on this page · raw message

hw/intc/apic_common.c +9 -0
index 4a34f03047..d95914066e 100644
@@ -284,6 +284,10 @@ static void apic_common_realize(DeviceState *dev, Error **errp)
     }
     vmstate_register_with_alias_id(NULL, instance_id, &vmstate_apic_common,
                                    s, -1, 0, NULL);
+
+    /* APIC LDR in x2APIC mode */
+    s->extended_log_dest = ((s->initial_apic_id & 0xffff0) << 16) |
+                            (1 << (s->initial_apic_id & 0xf));
 }
 
 static void apic_common_unrealize(DeviceState *dev)
@@ -424,6 +428,11 @@ static void apic_common_set_id(Object *obj, Visitor *v, const char *name,
         return;
     }
 
+    if (value >= 255 && !cpu_has_x2apic_feature(&s->cpu->env)) {
+        error_setg(errp, "APIC ID %d requires x2APIC feature in CPU", value);
+        return;
+    }
+
     s->initial_apic_id = value;
     s->id = (uint8_t)value;
 }
include/hw/i386/apic.h +1 -2
index 2cebeb4faf..12aad09f4c 100644
@@ -3,8 +3,7 @@
 
 
 /* apic.c */
-void apic_deliver_irq(uint8_t dest, uint8_t dest_mode, uint8_t delivery_mode,
-                      uint8_t vector_num, uint8_t trigger_mode);
+void apic_set_max_apic_id(uint32_t max_apic_id);
 int apic_accept_pic_intr(DeviceState *s);
 void apic_deliver_pic_intr(DeviceState *s, int level);
 void apic_deliver_nmi(DeviceState *d);
include/hw/i386/apic_internal.h +5 -2
index 5f2ba24bfc..e796e6cae3 100644
@@ -46,8 +46,10 @@
 #define APIC_DM_EXTINT                  7
 
 /* APIC destination mode */
-#define APIC_DESTMODE_FLAT              0xf
-#define APIC_DESTMODE_CLUSTER           1
+#define APIC_DESTMODE_PHYSICAL          0
+#define APIC_DESTMODE_LOGICAL           1
+#define APIC_DESTMODE_LOGICAL_FLAT      0xf
+#define APIC_DESTMODE_LOGICAL_CLUSTER   0
 
 #define APIC_TRIGGER_EDGE               0
 #define APIC_TRIGGER_LEVEL              1
@@ -187,6 +189,7 @@ struct APICCommonState {
     DeviceState *vapic;
     hwaddr vapic_paddr; /* note: persistence via kvmvapic */
     bool legacy_instance_id;
+    uint32_t extended_log_dest;
 };
 
 typedef struct VAPICState {
target/i386/cpu-sysemu.c +7 -1
index 28115edf44..a9ff10c517 100644
@@ -281,11 +281,17 @@ void x86_cpu_apic_create(X86CPU *cpu, Error **errp)
                               OBJECT(cpu->apic_state));
     object_unref(OBJECT(cpu->apic_state));
 
-    qdev_prop_set_uint32(cpu->apic_state, "id", cpu->apic_id);
     /* TODO: convert to link<> */
     apic = APIC_COMMON(cpu->apic_state);
     apic->cpu = cpu;
     apic->apicbase = APIC_DEFAULT_ADDRESS | MSR_IA32_APICBASE_ENABLE;
+
+    /*
+     * apic_common_set_id needs to check if the CPU has x2APIC
+     * feature in case APIC ID >= 255, so we need to set apic->cpu
+     * before setting APIC ID
+     */
+    qdev_prop_set_uint32(cpu->apic_state, "id", cpu->apic_id);
 }
 
 void x86_cpu_apic_realize(X86CPU *cpu, Error **errp)
Signature · 1 line
2.25.1
#3 lore raw

PATCH v6 3/5 apic, i386/tcg: add x2apic transitions

In reply to Bui Quang Minh

This commit adds support for x2APIC transitions when writing to MSR_IA32_APICBASE register and finally adds CPUID_EXT_X2APIC to TCG_EXT_FEATURES.

---
 hw/intc/apic.c                       | 50 ++++++++++++++++++++++++++++
 hw/intc/apic_common.c                |  7 ++--
 target/i386/cpu-sysemu.c             | 10 ++++++
 target/i386/cpu.c                    |  8 ++---
 target/i386/cpu.h                    |  6 ++++
 target/i386/tcg/sysemu/misc_helper.c |  4 +++
 6 files changed, 76 insertions(+), 9 deletions(-)
hw/intc/apic.c +50 -0
index 9f741794a7..b8f56836a6 100644
@@ -309,8 +309,41 @@ bool is_x2apic_mode(DeviceState *dev)
     return s->apicbase & MSR_IA32_APICBASE_EXTD;
 }
 
+static void apic_set_base_check(APICCommonState *s, uint64_t val)
+{
+    /* Enable x2apic when x2apic is not supported by CPU */
+    if (!cpu_has_x2apic_feature(&s->cpu->env) &&
+        val & MSR_IA32_APICBASE_EXTD)
+        raise_exception_ra(&s->cpu->env, EXCP0D_GPF, GETPC());
+
+    /*
+     * Transition into invalid state
+     * (s->apicbase & MSR_IA32_APICBASE_ENABLE == 0) &&
+     * (s->apicbase & MSR_IA32_APICBASE_EXTD) == 1
+     */
+    if (!(val & MSR_IA32_APICBASE_ENABLE) &&
+        (val & MSR_IA32_APICBASE_EXTD))
+        raise_exception_ra(&s->cpu->env, EXCP0D_GPF, GETPC());
+
+    /* Invalid transition from disabled mode to x2APIC */
+    if (!(s->apicbase & MSR_IA32_APICBASE_ENABLE) &&
+        !(s->apicbase & MSR_IA32_APICBASE_EXTD) &&
+        (val & MSR_IA32_APICBASE_ENABLE) &&
+        (val & MSR_IA32_APICBASE_EXTD))
+        raise_exception_ra(&s->cpu->env, EXCP0D_GPF, GETPC());
+
+    /* Invalid transition from x2APIC to xAPIC */
+    if ((s->apicbase & MSR_IA32_APICBASE_ENABLE) &&
+        (s->apicbase & MSR_IA32_APICBASE_EXTD) &&
+        (val & MSR_IA32_APICBASE_ENABLE) &&
+        !(val & MSR_IA32_APICBASE_EXTD))
+        raise_exception_ra(&s->cpu->env, EXCP0D_GPF, GETPC());
+}
+
 static void apic_set_base(APICCommonState *s, uint64_t val)
 {
+    apic_set_base_check(s, val);
+
     s->apicbase = (val & 0xfffff000) |
         (s->apicbase & (MSR_IA32_APICBASE_BSP | MSR_IA32_APICBASE_ENABLE));
     /* if disabled, cannot be enabled again */
@@ -319,6 +352,23 @@ static void apic_set_base(APICCommonState *s, uint64_t val)
         cpu_clear_apic_feature(&s->cpu->env);
         s->spurious_vec &= ~APIC_SV_ENABLE;
     }
+
+    /* Transition from disabled mode to xAPIC */
+    if (!(s->apicbase & MSR_IA32_APICBASE_ENABLE) &&
+        (val & MSR_IA32_APICBASE_ENABLE)) {
+        s->apicbase |= MSR_IA32_APICBASE_ENABLE;
+        cpu_set_apic_feature(&s->cpu->env);
+    }
+
+    /* Transition from xAPIC to x2APIC */
+    if (cpu_has_x2apic_feature(&s->cpu->env) &&
+        !(s->apicbase & MSR_IA32_APICBASE_EXTD) &&
+        (val & MSR_IA32_APICBASE_EXTD)) {
+        s->apicbase |= MSR_IA32_APICBASE_EXTD;
+
+        s->log_dest = ((s->initial_apic_id & 0xffff0) << 16) |
+                      (1 << (s->initial_apic_id & 0xf));
+    }
 }
 
 static void apic_set_tpr(APICCommonState *s, uint8_t val)
hw/intc/apic_common.c +2 -5
index d95914066e..396f828be8 100644
@@ -43,11 +43,8 @@ void cpu_set_apic_base(DeviceState *dev, uint64_t val)
     if (dev) {
         APICCommonState *s = APIC_COMMON(dev);
         APICCommonClass *info = APIC_COMMON_GET_CLASS(s);
-        /* switching to x2APIC, reset possibly modified xAPIC ID */
-        if (!(s->apicbase & MSR_IA32_APICBASE_EXTD) &&
-            (val & MSR_IA32_APICBASE_EXTD)) {
-            s->id = s->initial_apic_id;
-        }
+        /* Reset possibly modified xAPIC ID */
+        s->id = s->initial_apic_id;
         info->set_base(s, val);
     }
 }
target/i386/cpu-sysemu.c +10 -0
index a9ff10c517..f6bbe33372 100644
@@ -235,6 +235,16 @@ void cpu_clear_apic_feature(CPUX86State *env)
     env->features[FEAT_1_EDX] &= ~CPUID_APIC;
 }
 
+void cpu_set_apic_feature(CPUX86State *env)
+{
+    env->features[FEAT_1_EDX] |= CPUID_APIC;
+}
+
+bool cpu_has_x2apic_feature(CPUX86State *env)
+{
+    return env->features[FEAT_1_ECX] & CPUID_EXT_X2APIC;
+}
+
 bool cpu_is_bsp(X86CPU *cpu)
 {
     return cpu_get_apic_base(cpu->apic_state) & MSR_IA32_APICBASE_BSP;
target/i386/cpu.c +4 -4
index 97ad229d8b..240a1f9737 100644
@@ -630,8 +630,7 @@ void x86_cpu_vendor_words2str(char *dst, uint32_t vendor1,
  * in CPL=3; remove them if they are ever implemented for system emulation.
  */
 #if defined CONFIG_USER_ONLY
-#define CPUID_EXT_KERNEL_FEATURES (CPUID_EXT_PCID | CPUID_EXT_TSC_DEADLINE_TIMER | \
-                                 CPUID_EXT_X2APIC)
+#define CPUID_EXT_KERNEL_FEATURES (CPUID_EXT_PCID | CPUID_EXT_TSC_DEADLINE_TIMER)
 #else
 #define CPUID_EXT_KERNEL_FEATURES 0
 #endif
@@ -641,12 +640,13 @@ void x86_cpu_vendor_words2str(char *dst, uint32_t vendor1,
           CPUID_EXT_XSAVE | /* CPUID_EXT_OSXSAVE is dynamic */   \
           CPUID_EXT_MOVBE | CPUID_EXT_AES | CPUID_EXT_HYPERVISOR | \
           CPUID_EXT_RDRAND | CPUID_EXT_AVX | CPUID_EXT_F16C | \
-          CPUID_EXT_FMA | CPUID_EXT_KERNEL_FEATURES)
+          CPUID_EXT_FMA | CPUID_EXT_X2APIC | CPUID_EXT_KERNEL_FEATURES)
           /* missing:
           CPUID_EXT_DTES64, CPUID_EXT_DSCPL, CPUID_EXT_VMX, CPUID_EXT_SMX,
           CPUID_EXT_EST, CPUID_EXT_TM2, CPUID_EXT_CID,
           CPUID_EXT_XTPR, CPUID_EXT_PDCM, CPUID_EXT_PCID, CPUID_EXT_DCA,
-          CPUID_EXT_X2APIC, CPUID_EXT_TSC_DEADLINE_TIMER */
+          CPUID_EXT_TSC_DEADLINE_TIMER
+          */
 
 #ifdef TARGET_X86_64
 #define TCG_EXT2_X86_64_FEATURES CPUID_EXT2_LM
target/i386/cpu.h +6 -0
index 7252a5cdeb..76b325176e 100644
@@ -379,6 +379,10 @@ typedef enum X86Seg {
 #define MSR_IA32_APICBASE_ENABLE        (1<<11)
 #define MSR_IA32_APICBASE_EXTD          (1 << 10)
 #define MSR_IA32_APICBASE_BASE          (0xfffffU<<12)
+#define MSR_IA32_APICBASE_RESERVED \
+        (~(uint64_t)(MSR_IA32_APICBASE_BSP | MSR_IA32_APICBASE_ENABLE \
+                     | MSR_IA32_APICBASE_EXTD | MSR_IA32_APICBASE_BASE))
+
 #define MSR_IA32_FEATURE_CONTROL        0x0000003a
 #define MSR_TSC_ADJUST                  0x0000003b
 #define MSR_IA32_SPEC_CTRL              0x48
@@ -2198,8 +2202,10 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count,
                    uint32_t *eax, uint32_t *ebx,
                    uint32_t *ecx, uint32_t *edx);
 void cpu_clear_apic_feature(CPUX86State *env);
+void cpu_set_apic_feature(CPUX86State *env);
 void host_cpuid(uint32_t function, uint32_t count,
                 uint32_t *eax, uint32_t *ebx, uint32_t *ecx, uint32_t *edx);
+bool cpu_has_x2apic_feature(CPUX86State *env);
 
 /* helper.c */
 void x86_cpu_set_a20(X86CPU *cpu, int a20_state);
target/i386/tcg/sysemu/misc_helper.c +4 -0
index 1fce2076a3..91a58d4d97 100644
@@ -159,6 +159,10 @@ void helper_wrmsr(CPUX86State *env)
         env->sysenter_eip = val;
         break;
     case MSR_IA32_APICBASE:
+        if (val & MSR_IA32_APICBASE_RESERVED) {
+            goto error;
+        }
+
         cpu_set_apic_base(env_archcpu(env)->apic_state, val);
         break;
     case MSR_EFER:
Signature · 1 line
2.25.1
#4 lore raw

PATCH v6 4/5 intel_iommu: allow Extended Interrupt Mode when using userspace APIC

In reply to Bui Quang Minh

As userspace APIC now supports x2APIC, intel interrupt remapping hardware can be set to EIM mode when userspace local APIC is used.

---
 hw/i386/intel_iommu.c | 11 -----------
 1 file changed, 11 deletions(-)
hw/i386/intel_iommu.c +0 -11
index dcc334060c..5e576f6059 100644
@@ -4043,17 +4043,6 @@ static bool vtd_decide_config(IntelIOMMUState *s, Error **errp)
                       && x86_iommu_ir_supported(x86_iommu) ?
                                               ON_OFF_AUTO_ON : ON_OFF_AUTO_OFF;
     }
-    if (s->intr_eim == ON_OFF_AUTO_ON && !s->buggy_eim) {
-        if (!kvm_irqchip_is_split()) {
-            error_setg(errp, "eim=on requires accel=kvm,kernel-irqchip=split");
-            return false;
-        }
-        if (!kvm_enable_x2apic()) {
-            error_setg(errp, "eim=on requires support on the KVM side"
-                             "(X2APIC_API, first shipped in v4.7)");
-            return false;
-        }
-    }
 
     /* Currently only address widths supported are 39 and 48 bits */
     if ((s->aw_bits != VTD_HOST_AW_39BIT) &&
Signature · 1 line
2.25.1
#5 lore raw

Re: [PATCH v6 4/5] intel_iommu: allow Extended Interrupt Mode when using userspace APIC

+Peter, +Jason (intel-iommu maintainer/reviewer)

Quoted 19 lines · Bui Quang Minh

As userspace APIC now supports x2APIC, intel interrupt remapping hardware can be set to EIM mode when userspace local APIC is used.

---
 hw/i386/intel_iommu.c | 11 -----------
 1 file changed, 11 deletions(-)
hw/i386/intel_iommu.c +0 -2
index dcc334060c..5e576f6059 100644
@@ -4043,17 +4043,6 @@ static bool vtd_decide_config(IntelIOMMUState *s, Error **errp)
                       && x86_iommu_ir_supported(x86_iommu) ?
                                               ON_OFF_AUTO_ON : ON_OFF_AUTO_OFF;
     }
-    if (s->intr_eim == ON_OFF_AUTO_ON && !s->buggy_eim) {
-        if (!kvm_irqchip_is_split()) {

hw/i386/intel_iommu.c static bool vtd_decide_config(IntelIOMMUState *s, Error **errp) · line 4046

Quoted 10 lines
hw/i386/intel_iommu.c +0 -9
-            error_setg(errp, "eim=on requires accel=kvm,kernel-irqchip=split");
-            return false;
-        }
-        if (!kvm_enable_x2apic()) {
-            error_setg(errp, "eim=on requires support on the KVM side"
-                             "(X2APIC_API, first shipped in v4.7)");
-            return false;
-        }
-    }
 

Given commit 20ca47429e ('Revert "intel_iommu: Fix irqchip / X2APIC configuration checks"'), won't we regress behaviour again for the accel=kvm case by dropping the kvm_enable_x2apic() call here?

Perhaps if we support userspace APIC with TCG the check just needs to be redone to instead avoid always requiring kvm e.g.:

if (kvm_irqchip_in_kernel()) {
error_setg(errp, "eim=on requires accel=kvm,kernel-irqchip=split"
"(X2APIC_API, first shipped in v4.7)");
}

if (kvm_irqchip_is_split() && !kvm_enable_x2apic()) {
    error_setg(errp, "eim=on requires support on the KVM side"
               "(X2APIC_API, first shipped in v4.7)");
    return false;
}
#6 lore raw

Re: [PATCH v6 4/5] intel_iommu: allow Extended Interrupt Mode when using userspace APIC

Quoted 44 lines · Joao Martins

+Peter, +Jason (intel-iommu maintainer/reviewer)

Quoted 19 lines · Bui Quang Minh

As userspace APIC now supports x2APIC, intel interrupt remapping hardware can be set to EIM mode when userspace local APIC is used.

---
  hw/i386/intel_iommu.c | 11 -----------
  1 file changed, 11 deletions(-)
hw/i386/intel_iommu.c +0 -2
index dcc334060c..5e576f6059 100644
@@ -4043,17 +4043,6 @@ static bool vtd_decide_config(IntelIOMMUState *s, Error **errp)
                        && x86_iommu_ir_supported(x86_iommu) ?
                                                ON_OFF_AUTO_ON : ON_OFF_AUTO_OFF;
      }
-    if (s->intr_eim == ON_OFF_AUTO_ON && !s->buggy_eim) {
-        if (!kvm_irqchip_is_split()) {

hw/i386/intel_iommu.c static bool vtd_decide_config(IntelIOMMUState *s, Error **errp) · line 4046

Quoted 10 lines
hw/i386/intel_iommu.c +0 -9
-            error_setg(errp, "eim=on requires accel=kvm,kernel-irqchip=split");
-            return false;
-        }
-        if (!kvm_enable_x2apic()) {
-            error_setg(errp, "eim=on requires support on the KVM side"
-                             "(X2APIC_API, first shipped in v4.7)");
-            return false;
-        }
-    }
 

Given commit 20ca47429e ('Revert "intel_iommu: Fix irqchip / X2APIC configuration checks"'), won't we regress behaviour again for the accel=kvm case by dropping the kvm_enable_x2apic() call here?

Perhaps if we support userspace APIC with TCG the check just needs to be redone to instead avoid always requiring kvm e.g.:

if (kvm_irqchip_in_kernel()) {
error_setg(errp, "eim=on requires accel=kvm,kernel-irqchip=split"
"(X2APIC_API, first shipped in v4.7)");
}

Quoted 5 lines
if (kvm_irqchip_is_split() && !kvm_enable_x2apic()) {
     error_setg(errp, "eim=on requires support on the KVM side"
                "(X2APIC_API, first shipped in v4.7)");
     return false;
}

Thank you for your review. I think the check for kvm_irqchip_in_kernel() is not correct, AFAIK, kvm_irqchip_is_split() == true also means kvm_irqchip_in_kernel() == true on x86. To check if kernel-irqchip = on, we need to do something like in x86_iommu_realize

    bool irq_all_kernel = kvm_irqchip_in_kernel() && 

!kvm_irqchip_is_split();

The original check for !kvm_irqchip_is_split means emulated/userspace APIC. It's because to reach that check x86_iommu_ir_supported(...) == true and x86_iommu_ir_supported(...) == true is not supported when kernel-irqchip = on (there is a check for this in x86_iommu_realize)

So I think we need to change the check to

    if (s->intr_eim == ON_OFF_AUTO_ON && !s->buggy_eim) {
        if (kvm_irqchip_is_split() && !kvm_enable_x2apic()) {
            error_setg(errp, "eim=on requires support on the KVM side"
                             "(X2APIC_API, first shipped in v4.7)");
            return false;
        }
    }

Is it OK?

Thanks,
Quang Minh.

#7 lore raw

Re: [PATCH v6 4/5] intel_iommu: allow Extended Interrupt Mode when using userspace APIC

Quoted 2 lines · Bui Quang Minh
Quoted 1 line · Joao Martins

+Peter, +Jason (intel-iommu maintainer/reviewer)

Thanks for copying me, Joan.

Quoted 71 lines
Quoted 42 lines · Bui Quang Minh
Quoted 18 lines

As userspace APIC now supports x2APIC, intel interrupt remapping hardware can be set to EIM mode when userspace local APIC is used.

---
  hw/i386/intel_iommu.c | 11 -----------
  1 file changed, 11 deletions(-)
hw/i386/intel_iommu.c +0 -1
index dcc334060c..5e576f6059 100644
@@ -4043,17 +4043,6 @@ static bool vtd_decide_config(IntelIOMMUState *s, Error **errp)
                        && x86_iommu_ir_supported(x86_iommu) ?
                                                ON_OFF_AUTO_ON : ON_OFF_AUTO_OFF;
      }
-    if (s->intr_eim == ON_OFF_AUTO_ON && !s->buggy_eim) {

hw/i386/intel_iommu.c static bool vtd_decide_config(IntelIOMMUState *s, Error **errp) · line 4056

Quoted 10 lines
hw/i386/intel_iommu.c +0 -10
-        if (!kvm_irqchip_is_split()) {
-            error_setg(errp, "eim=on requires accel=kvm,kernel-irqchip=split");
-            return false;
-        }
-        if (!kvm_enable_x2apic()) {
-            error_setg(errp, "eim=on requires support on the KVM side"
-                             "(X2APIC_API, first shipped in v4.7)");
-            return false;
-        }
-    }

Given commit 20ca47429e ('Revert "intel_iommu: Fix irqchip / X2APIC configuration checks"'), won't we regress behaviour again for the accel=kvm case by dropping the kvm_enable_x2apic() call here?

Perhaps if we support userspace APIC with TCG the check just needs to be redone to instead avoid always requiring kvm e.g.:

if (kvm_irqchip_in_kernel()) {
error_setg(errp, "eim=on requires accel=kvm,kernel-irqchip=split"
"(X2APIC_API, first shipped in v4.7)");
}

Quoted 5 lines
if (kvm_irqchip_is_split() && !kvm_enable_x2apic()) {
     error_setg(errp, "eim=on requires support on the KVM side"
                "(X2APIC_API, first shipped in v4.7)");
     return false;
}

Thank you for your review. I think the check for kvm_irqchip_in_kernel() is not correct, AFAIK, kvm_irqchip_is_split() == true also means kvm_irqchip_in_kernel() == true on x86. To check if kernel-irqchip = on, we need to do something like in x86_iommu_realize

    bool irq_all_kernel = kvm_irqchip_in_kernel() &&

!kvm_irqchip_is_split();

The original check for !kvm_irqchip_is_split means emulated/userspace APIC. It's because to reach that check x86_iommu_ir_supported(...) == true and x86_iommu_ir_supported(...) == true is not supported when kernel-irqchip = on (there is a check for this in x86_iommu_realize)

So I think we need to change the check to

    if (s->intr_eim == ON_OFF_AUTO_ON && !s->buggy_eim) {
        if (kvm_irqchip_is_split() && !kvm_enable_x2apic()) {
            error_setg(errp, "eim=on requires support on the KVM side"
                             "(X2APIC_API, first shipped in v4.7)");
            return false;
        }
    }
Quoted 1 line

Is it OK?

Mostly to me, except that we may also want to keep failing if all irq chips are in kernel?

Thanks,

Signature · 1 line
Peter Xu
#8 lore raw

Re: [PATCH v6 4/5] intel_iommu: allow Extended Interrupt Mode when using userspace APIC

Quoted 77 lines · Peter Xu
Quoted 2 lines · Bui Quang Minh
Quoted 1 line · Joao Martins

+Peter, +Jason (intel-iommu maintainer/reviewer)

Thanks for copying me, Joan.

Quoted 71 lines
Quoted 42 lines · Bui Quang Minh
Quoted 18 lines

As userspace APIC now supports x2APIC, intel interrupt remapping hardware can be set to EIM mode when userspace local APIC is used.

---
   hw/i386/intel_iommu.c | 11 -----------
   1 file changed, 11 deletions(-)
hw/i386/intel_iommu.c +0 -1
index dcc334060c..5e576f6059 100644
@@ -4043,17 +4043,6 @@ static bool vtd_decide_config(IntelIOMMUState *s, Error **errp)
                         && x86_iommu_ir_supported(x86_iommu) ?
                                                 ON_OFF_AUTO_ON : ON_OFF_AUTO_OFF;
       }
-    if (s->intr_eim == ON_OFF_AUTO_ON && !s->buggy_eim) {

hw/i386/intel_iommu.c static bool vtd_decide_config(IntelIOMMUState *s, Error **errp) · line 4056

Quoted 10 lines
hw/i386/intel_iommu.c +0 -10
-        if (!kvm_irqchip_is_split()) {
-            error_setg(errp, "eim=on requires accel=kvm,kernel-irqchip=split");
-            return false;
-        }
-        if (!kvm_enable_x2apic()) {
-            error_setg(errp, "eim=on requires support on the KVM side"
-                             "(X2APIC_API, first shipped in v4.7)");
-            return false;
-        }
-    }

Given commit 20ca47429e ('Revert "intel_iommu: Fix irqchip / X2APIC configuration checks"'), won't we regress behaviour again for the accel=kvm case by dropping the kvm_enable_x2apic() call here?

Perhaps if we support userspace APIC with TCG the check just needs to be redone to instead avoid always requiring kvm e.g.:

if (kvm_irqchip_in_kernel()) {
error_setg(errp, "eim=on requires accel=kvm,kernel-irqchip=split"
"(X2APIC_API, first shipped in v4.7)");
}

Quoted 5 lines
if (kvm_irqchip_is_split() && !kvm_enable_x2apic()) {
      error_setg(errp, "eim=on requires support on the KVM side"
                 "(X2APIC_API, first shipped in v4.7)");
      return false;
}

Thank you for your review. I think the check for kvm_irqchip_in_kernel() is not correct, AFAIK, kvm_irqchip_is_split() == true also means kvm_irqchip_in_kernel() == true on x86. To check if kernel-irqchip = on, we need to do something like in x86_iommu_realize

     bool irq_all_kernel = kvm_irqchip_in_kernel() &&

!kvm_irqchip_is_split();

The original check for !kvm_irqchip_is_split means emulated/userspace APIC. It's because to reach that check x86_iommu_ir_supported(...) == true and x86_iommu_ir_supported(...) == true is not supported when kernel-irqchip = on (there is a check for this in x86_iommu_realize)

So I think we need to change the check to

     if (s->intr_eim == ON_OFF_AUTO_ON && !s->buggy_eim) {
         if (kvm_irqchip_is_split() && !kvm_enable_x2apic()) {
             error_setg(errp, "eim=on requires support on the KVM side"
                              "(X2APIC_API, first shipped in v4.7)");
             return false;
         }
     }
Quoted 4 lines
Quoted 1 line

Is it OK?

Mostly to me, except that we may also want to keep failing if all irq chips are in kernel?

Yes, that behavior does not change after this patch. x86_iommu_realize in the parent type TYPE_X86_IOMMU_DEVICE fails when interrupt remapping is on and all irq chips are in kernel already.

    static void x86_iommu_realize(DeviceState *dev, Error **errp)
    {
        /* ... */
        /* Both Intel and AMD IOMMU IR only support "kernel-irqchip 
{off|split}" */
        if (x86_iommu_ir_supported(x86_iommu) && irq_all_kernel) {
            error_setg(errp, "Interrupt Remapping cannot work with "
                         "kernel-irqchip=on, please use 'split|off'.");
            return;
        }
        /* ... */
    }

So in case we reach here in with the interrupt remapping is on and decide whether eim is on or not, it cannot be that irq chips are all in kernel.

Thanks,
Quang Minh.

#9 lore raw

Re: [PATCH v6 4/5] intel_iommu: allow Extended Interrupt Mode when using userspace APIC

Quoted 101 lines · Bui Quang Minh
Quoted 77 lines · Peter Xu
Quoted 2 lines · Bui Quang Minh
Quoted 1 line · Joao Martins

+Peter, +Jason (intel-iommu maintainer/reviewer)

Thanks for copying me, Joan.

Quoted 71 lines
Quoted 42 lines · Bui Quang Minh
Quoted 18 lines

As userspace APIC now supports x2APIC, intel interrupt remapping hardware can be set to EIM mode when userspace local APIC is used.

---
   hw/i386/intel_iommu.c | 11 -----------
   1 file changed, 11 deletions(-)
hw/i386/intel_iommu.c +0 -1
index dcc334060c..5e576f6059 100644
@@ -4043,17 +4043,6 @@ static bool vtd_decide_config(IntelIOMMUState *s, Error **errp)
                         && x86_iommu_ir_supported(x86_iommu) ?
                                                 ON_OFF_AUTO_ON : ON_OFF_AUTO_OFF;
       }
-    if (s->intr_eim == ON_OFF_AUTO_ON && !s->buggy_eim) {

hw/i386/intel_iommu.c static bool vtd_decide_config(IntelIOMMUState *s, Error **errp) · line 4056

Quoted 10 lines
hw/i386/intel_iommu.c +0 -10
-        if (!kvm_irqchip_is_split()) {
-            error_setg(errp, "eim=on requires accel=kvm,kernel-irqchip=split");
-            return false;
-        }
-        if (!kvm_enable_x2apic()) {
-            error_setg(errp, "eim=on requires support on the KVM side"
-                             "(X2APIC_API, first shipped in v4.7)");
-            return false;
-        }
-    }

Given commit 20ca47429e ('Revert "intel_iommu: Fix irqchip / X2APIC configuration checks"'), won't we regress behaviour again for the accel=kvm case by dropping the kvm_enable_x2apic() call here?

Perhaps if we support userspace APIC with TCG the check just needs to be redone to instead avoid always requiring kvm e.g.:

if (kvm_irqchip_in_kernel()) {
error_setg(errp, "eim=on requires accel=kvm,kernel-irqchip=split"
"(X2APIC_API, first shipped in v4.7)");
}

Quoted 5 lines
if (kvm_irqchip_is_split() && !kvm_enable_x2apic()) {
      error_setg(errp, "eim=on requires support on the KVM side"
                 "(X2APIC_API, first shipped in v4.7)");
      return false;
}

Thank you for your review. I think the check for kvm_irqchip_in_kernel() is not correct, AFAIK, kvm_irqchip_is_split() == true also means kvm_irqchip_in_kernel() == true on x86. To check if kernel-irqchip = on, we need to do something like in x86_iommu_realize

     bool irq_all_kernel = kvm_irqchip_in_kernel() &&

!kvm_irqchip_is_split();

The original check for !kvm_irqchip_is_split means emulated/userspace APIC. It's because to reach that check x86_iommu_ir_supported(...) == true and x86_iommu_ir_supported(...) == true is not supported when kernel-irqchip = on (there is a check for this in x86_iommu_realize)

So I think we need to change the check to

     if (s->intr_eim == ON_OFF_AUTO_ON && !s->buggy_eim) {
         if (kvm_irqchip_is_split() && !kvm_enable_x2apic()) {
             error_setg(errp, "eim=on requires support on the KVM side"
                              "(X2APIC_API, first shipped in v4.7)");
             return false;
         }
     }
Quoted 4 lines
Quoted 1 line

Is it OK?

Mostly to me, except that we may also want to keep failing if all irq chips are in kernel?

Yes, that behavior does not change after this patch. x86_iommu_realize in the parent type TYPE_X86_IOMMU_DEVICE fails when interrupt remapping is on and all irq chips are in kernel already.

    static void x86_iommu_realize(DeviceState *dev, Error **errp)
    {
        /* ... */
        /* Both Intel and AMD IOMMU IR only support "kernel-irqchip
{off|split}" */
        if (x86_iommu_ir_supported(x86_iommu) && irq_all_kernel) {
            error_setg(errp, "Interrupt Remapping cannot work with "
                         "kernel-irqchip=on, please use 'split|off'.");
            return;
        }
        /* ... */
    }
Quoted 2 lines

So in case we reach here in with the interrupt remapping is on and decide whether eim is on or not, it cannot be that irq chips are all in kernel.

Ah that's okay then, thanks.

Signature · 1 line
Peter Xu
#10 lore raw

PATCH v6 5/5 amd_iommu: report x2APIC support to the operating system

In reply to Bui Quang Minh

This commit adds XTSup configuration to let user choose to whether enable this feature or not. When XTSup is enabled, additional bytes in IRTE with enabled guest virtual VAPIC are used to support 32-bit destination id.

Additionally, this commit exports IVHD type 0x11 besides the old IVHD type 0x10 in ACPI table. IVHD type 0x10 does not report full set of IOMMU features only the legacy ones, so operating system (e.g. Linux) may only detects x2APIC support if IVHD type 0x11 is available. The IVHD type 0x10 is kept so that old operating system that only parses type 0x10 can detect the IOMMU device.

---
 hw/i386/acpi-build.c | 129 +++++++++++++++++++++++++++----------------
 hw/i386/amd_iommu.c  |  29 +++++++++-
 hw/i386/amd_iommu.h  |  16 ++++--
 3 files changed, 117 insertions(+), 57 deletions(-)
hw/i386/acpi-build.c +80 -49
index 9c74fa17ad..4231b80f25 100644
@@ -2336,30 +2336,23 @@ static void
 build_amd_iommu(GArray *table_data, BIOSLinker *linker, const char *oem_id,
                 const char *oem_table_id)
 {
-    int ivhd_table_len = 24;
     AMDVIState *s = AMD_IOMMU_DEVICE(x86_iommu_get_default());
     GArray *ivhd_blob = g_array_new(false, true, 1);
     AcpiTable table = { .sig = "IVRS", .rev = 1, .oem_id = oem_id,
                         .oem_table_id = oem_table_id };
+    uint64_t feature_report;
 
     acpi_table_begin(&table, table_data);
     /* IVinfo - IO virtualization information common to all
      * IOMMU units in a system
      */
-    build_append_int_noprefix(table_data, 40UL << 8/* PASize */, 4);
+    build_append_int_noprefix(table_data,
+                             (1UL << 0) | /* EFRSup */
+                             (40UL << 8), /* PASize */
+                             4);
     /* reserved */
     build_append_int_noprefix(table_data, 0, 8);
 
-    /* IVHD definition - type 10h */
-    build_append_int_noprefix(table_data, 0x10, 1);
-    /* virtualization flags */
-    build_append_int_noprefix(table_data,
-                             (1UL << 0) | /* HtTunEn      */
-                             (1UL << 4) | /* iotblSup     */
-                             (1UL << 6) | /* PrefSup      */
-                             (1UL << 7),  /* PPRSup       */
-                             1);
-
     /*
      * A PCI bus walk, for each PCI host bridge, is necessary to create a
      * complete set of IVHD entries.  Do this into a separate blob so that we
@@ -2379,56 +2372,94 @@ build_amd_iommu(GArray *table_data, BIOSLinker *linker, const char *oem_id,
         build_append_int_noprefix(ivhd_blob, 0x0000001, 4);
     }
 
-    ivhd_table_len += ivhd_blob->len;
-
     /*
      * When interrupt remapping is supported, we add a special IVHD device
-     * for type IO-APIC.
-     */
-    if (x86_iommu_ir_supported(x86_iommu_get_default())) {
-        ivhd_table_len += 8;
-    }
-
-    /* IVHD length */
-    build_append_int_noprefix(table_data, ivhd_table_len, 2);
-    /* DeviceID */
-    build_append_int_noprefix(table_data,
-                              object_property_get_int(OBJECT(&s->pci), "addr",
-                                                      &error_abort), 2);
-    /* Capability offset */
-    build_append_int_noprefix(table_data, s->pci.capab_offset, 2);
-    /* IOMMU base address */
-    build_append_int_noprefix(table_data, s->mmio.addr, 8);
-    /* PCI Segment Group */
-    build_append_int_noprefix(table_data, 0, 2);
-    /* IOMMU info */
-    build_append_int_noprefix(table_data, 0, 2);
-    /* IOMMU Feature Reporting */
-    build_append_int_noprefix(table_data,
-                             (48UL << 30) | /* HATS   */
-                             (48UL << 28) | /* GATS   */
-                             (1UL << 2)   | /* GTSup  */
-                             (1UL << 6),    /* GASup  */
-                             4);
-
-    /* IVHD entries as found above */
-    g_array_append_vals(table_data, ivhd_blob->data, ivhd_blob->len);
-    g_array_free(ivhd_blob, TRUE);
-
-    /*
-     * Add a special IVHD device type.
+     * for type IO-APIC
      * Refer to spec - Table 95: IVHD device entry type codes
      *
      * Linux IOMMU driver checks for the special IVHD device (type IO-APIC).
      * See Linux kernel commit 'c2ff5cf5294bcbd7fa50f7d860e90a66db7e5059'
      */
     if (x86_iommu_ir_supported(x86_iommu_get_default())) {
-        build_append_int_noprefix(table_data,
+        build_append_int_noprefix(ivhd_blob,
                                  (0x1ull << 56) |           /* type IOAPIC */
                                  (IOAPIC_SB_DEVID << 40) |  /* IOAPIC devid */
                                  0x48,                      /* special device */
                                  8);
     }
+
+    /* IVHD definition - type 10h */
+    build_append_int_noprefix(table_data, 0x10, 1);
+    /* virtualization flags */
+    build_append_int_noprefix(table_data,
+                             (1UL << 0) | /* HtTunEn      */
+                             (1UL << 4) | /* iotblSup     */
+                             (1UL << 6) | /* PrefSup      */
+                             (1UL << 7),  /* PPRSup       */
+                             1);
+
+    /* IVHD length */
+    build_append_int_noprefix(table_data, ivhd_blob->len + 24, 2);
+    /* DeviceID */
+    build_append_int_noprefix(table_data,
+                              object_property_get_int(OBJECT(&s->pci), "addr",
+                                                      &error_abort), 2);
+    /* Capability offset */
+    build_append_int_noprefix(table_data, s->pci.capab_offset, 2);
+    /* IOMMU base address */
+    build_append_int_noprefix(table_data, s->mmio.addr, 8);
+    /* PCI Segment Group */
+    build_append_int_noprefix(table_data, 0, 2);
+    /* IOMMU info */
+    build_append_int_noprefix(table_data, 0, 2);
+    /* IOMMU Feature Reporting */
+    feature_report = (48UL << 30) | /* HATS   */
+                     (48UL << 28) | /* GATS   */
+                     (1UL << 2)   | /* GTSup  */
+                     (1UL << 6);    /* GASup  */
+    if (s->xtsup) {
+        feature_report |= (1UL << 0); /* XTSup */
+    }
+    build_append_int_noprefix(table_data, feature_report, 4);
+
+    /* IVHD entries as found above */
+    g_array_append_vals(table_data, ivhd_blob->data, ivhd_blob->len);
+
+   /* IVHD definition - type 11h */
+    build_append_int_noprefix(table_data, 0x11, 1);
+    /* virtualization flags */
+    build_append_int_noprefix(table_data,
+                             (1UL << 0) | /* HtTunEn      */
+                             (1UL << 4),  /* iotblSup     */
+                             1);
+
+    /* IVHD length */
+    build_append_int_noprefix(table_data, ivhd_blob->len + 40, 2);
+    /* DeviceID */
+    build_append_int_noprefix(table_data,
+                              object_property_get_int(OBJECT(&s->pci), "addr",
+                                                      &error_abort), 2);
+    /* Capability offset */
+    build_append_int_noprefix(table_data, s->pci.capab_offset, 2);
+    /* IOMMU base address */
+    build_append_int_noprefix(table_data, s->mmio.addr, 8);
+    /* PCI Segment Group */
+    build_append_int_noprefix(table_data, 0, 2);
+    /* IOMMU info */
+    build_append_int_noprefix(table_data, 0, 2);
+    /* IOMMU Attributes */
+    build_append_int_noprefix(table_data, 0, 4);
+    /* EFR Register Image */
+    build_append_int_noprefix(table_data,
+                              amdvi_extended_feature_register(s),
+                              8);
+    /* EFR Register Image 2 */
+    build_append_int_noprefix(table_data, 0, 8);
+
+    /* IVHD entries as found above */
+    g_array_append_vals(table_data, ivhd_blob->data, ivhd_blob->len);
+
+    g_array_free(ivhd_blob, TRUE);
     acpi_table_end(linker, &table);
 }
 
hw/i386/amd_iommu.c +26 -3
index 9c77304438..4655cd801f 100644
@@ -31,6 +31,7 @@
 #include "hw/i386/apic_internal.h"
 #include "trace.h"
 #include "hw/i386/apic-msidef.h"
+#include "hw/qdev-properties.h"
 
 /* used AMD-Vi MMIO registers */
 const char *amdvi_mmio_low[] = {
@@ -74,6 +75,16 @@ typedef struct AMDVIIOTLBEntry {
     uint64_t page_mask;         /* physical page size  */
 } AMDVIIOTLBEntry;
 
+uint64_t amdvi_extended_feature_register(AMDVIState *s)
+{
+    uint64_t feature = AMDVI_DEFAULT_EXT_FEATURES;
+    if (s->xtsup) {
+        feature |= AMDVI_FEATURE_XT;
+    }
+
+    return feature;
+}
+
 /* configure MMIO registers at startup/reset */
 static void amdvi_set_quad(AMDVIState *s, hwaddr addr, uint64_t val,
                            uint64_t romask, uint64_t w1cmask)
@@ -1155,7 +1166,12 @@ static int amdvi_int_remap_ga(AMDVIState *iommu,
     irq->vector = irte.hi.fields.vector;
     irq->dest_mode = irte.lo.fields_remap.dm;
     irq->redir_hint = irte.lo.fields_remap.rq_eoi;
-    irq->dest = irte.lo.fields_remap.destination;
+    if (iommu->xtsup) {
+        irq->dest = irte.lo.fields_remap.destination |
+                    (irte.hi.fields.destination_hi << 24);
+    } else {
+        irq->dest = irte.lo.fields_remap.destination & 0xff;
+    }
 
     return 0;
 }
@@ -1506,8 +1522,9 @@ static void amdvi_init(AMDVIState *s)
 
     /* reset MMIO */
     memset(s->mmior, 0, AMDVI_MMIO_SIZE);
-    amdvi_set_quad(s, AMDVI_MMIO_EXT_FEATURES, AMDVI_EXT_FEATURES,
-            0xffffffffffffffef, 0);
+    amdvi_set_quad(s, AMDVI_MMIO_EXT_FEATURES,
+                   amdvi_extended_feature_register(s),
+                   0xffffffffffffffef, 0);
     amdvi_set_quad(s, AMDVI_MMIO_STATUS, 0, 0x98, 0x67);
 }
 
@@ -1591,6 +1608,11 @@ static void amdvi_sysbus_realize(DeviceState *dev, Error **errp)
     amdvi_init(s);
 }
 
+static Property amdvi_properties[] = {
+    DEFINE_PROP_BOOL("xtsup", AMDVIState, xtsup, false),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
 static const VMStateDescription vmstate_amdvi_sysbus = {
     .name = "amd-iommu",
     .unmigratable = 1
@@ -1617,6 +1639,7 @@ static void amdvi_sysbus_class_init(ObjectClass *klass, void *data)
     dc->user_creatable = true;
     set_bit(DEVICE_CATEGORY_MISC, dc->categories);
     dc->desc = "AMD IOMMU (AMD-Vi) DMA Remapping device";
+    device_class_set_props(dc, amdvi_properties);
 }
 
 static const TypeInfo amdvi_sysbus = {
hw/i386/amd_iommu.h +11 -5
index 6da893ee57..3d430434fe 100644
@@ -154,6 +154,7 @@
 
 #define AMDVI_FEATURE_PREFETCH            (1ULL << 0) /* page prefetch       */
 #define AMDVI_FEATURE_PPR                 (1ULL << 1) /* PPR Support         */
+#define AMDVI_FEATURE_XT                  (1ULL << 2) /* x2APIC Support      */
 #define AMDVI_FEATURE_GT                  (1ULL << 4) /* Guest Translation   */
 #define AMDVI_FEATURE_IA                  (1ULL << 6) /* inval all support   */
 #define AMDVI_FEATURE_GA                  (1ULL << 7) /* guest VAPIC support */
@@ -173,8 +174,9 @@
 #define AMDVI_IOTLB_MAX_SIZE 1024
 #define AMDVI_DEVID_SHIFT    36
 
-/* extended feature support */
-#define AMDVI_EXT_FEATURES (AMDVI_FEATURE_PREFETCH | AMDVI_FEATURE_PPR | \
+/* default extended feature */
+#define AMDVI_DEFAULT_EXT_FEATURES \
+        (AMDVI_FEATURE_PREFETCH | AMDVI_FEATURE_PPR | \
         AMDVI_FEATURE_IA | AMDVI_FEATURE_GT | AMDVI_FEATURE_HE | \
         AMDVI_GATS_MODE | AMDVI_HATS_MODE | AMDVI_FEATURE_GA)
 
@@ -278,8 +280,8 @@ union irte_ga_lo {
                 dm:1,
                 /* ------ */
                 guest_mode:1,
-                destination:8,
-                rsvd_1:48;
+                destination:24,
+                rsvd_1:32;
   } fields_remap;
 };
 
@@ -287,7 +289,8 @@ union irte_ga_hi {
   uint64_t val;
   struct {
       uint64_t  vector:8,
-                rsvd_2:56;
+                rsvd_2:48,
+                destination_hi:8;
   } fields;
 };
 
@@ -366,6 +369,9 @@ struct AMDVIState {
 
     /* Interrupt remapping */
     bool ga_enabled;
+    bool xtsup;
 };
 
+uint64_t amdvi_extended_feature_register(AMDVIState *s);
+
 #endif
Signature · 1 line
2.25.1