Skip to contentSkip to conversation

riscv: Reduce ARCH_KMALLOC_MINALIGN to 8

PATCH Applied Jisheng Zhang 3 participants 5 messages Jul 18, 2023 – Aug 30, 2023 RISC-V

lore
Share & tools
lore
#0 lore raw

v3 cover riscv: Reduce ARCH_KMALLOC_MINALIGN to 8

Currently, riscv defines ARCH_DMA_MINALIGN as L1_CACHE_BYTES, I.E 64Bytes, if CONFIG_RISCV_DMA_NONCOHERENT=y. To support unified kernel Image, usually we have to enable CONFIG_RISCV_DMA_NONCOHERENT, thus it brings some bad effects to coherent platforms:

Firstly, it wastes memory, kmalloc-96, kmalloc-32, kmalloc-16 and kmalloc-8 slab caches don't exist any more, they are replaced with either kmalloc-128 or kmalloc-64.

Secondly, larger than necessary kmalloc aligned allocations results in unnecessary cache/TLB pressure.

This issue also exists on arm64 platforms. From last year, Catalin tried to solve this issue by decoupling ARCH_KMALLOC_MINALIGN from ARCH_DMA_MINALIGN, limiting kmalloc() minimum alignment to dma_get_cache_alignment() and replacing ARCH_KMALLOC_MINALIGN usage in various drivers with ARCH_DMA_MINALIGN etc.[1]

One fact we can make use of for riscv: if the CPU doesn't support ZICBOM or T-HEAD CMO, we know the platform is coherent. Based on Catalin's work and above fact, we can easily solve the kmalloc align issue for riscv: we can override dma_get_cache_alignment(), then let it return ARCH_DMA_MINALIGN at the beginning and return 1 once we know the underlying HW neither supports ZICBOM nor supports T-HEAD CMO.

So what about if the CPU supports ZICBOM or T-HEAD CMO, but all the devices are dma coherent? Well, we use ARCH_DMA_MINALIGN as the kmalloc minimum alignment, nothing changed in this case. This case can be improved in the future once we see such platforms in mainline.

After this patch, a simple test of booting to a small buildroot rootfs on qemu shows:

kmalloc-96           5041    5041     96  ...
kmalloc-64           9606    9606     64  ...
kmalloc-32           5128    5128     32  ...
kmalloc-16           7682    7682     16  ...
kmalloc-8           10246   10246      8  ...

So we save about 1268KB memory. The saving will be much larger in normal OS env on real HW platforms.

patch1 allows kmalloc() caches aligned to the smallest value. patch2 enables DMA_BOUNCE_UNALIGNED_KMALLOC.

After this series:

As for coherent platforms, kmalloc-{8,16,32,96} caches come back on coherent both RV32 and RV64 platforms, I.E !ZICBOM and !THEAD_CMO.

As for noncoherent RV32 platforms, nothing changed.

As for noncoherent RV64 platforms, I.E either ZICBOM or THEAD_CMO, the above kmalloc caches also come back if > 4GB memory or users pass "swiotlb=mmnn,force" to force swiotlb creation if <= 4GB memory. How much mmnn should be depends on the specific platform, it needs to be tried and tested all possible usage case on the specific hardware. For example, I can use the minimal I/O TLB slabs on Sipeed M1S Dock.

Since v2:
- remove Change-Id
- use EXPORT_SYMBOL_GPL instead of EXPORT_SYMBOL
- update Link in commit msg per Conor's suggestion
- collect reviewed-by tag

Since v1
- remove preparation patches since they have been merged
- adjust Kconfig entry to keep entries sorted
- add new function riscv_set_dma_cache_alignment() to set the dma_cache_alignment var.

Jisheng Zhang (2):
riscv: allow kmalloc() caches aligned to the smallest value
riscv: enable DMA_BOUNCE_UNALIGNED_KMALLOC for !dma_coherent

 arch/riscv/Kconfig                  |  1 +
 arch/riscv/include/asm/cache.h      | 14 ++++++++++++++
 arch/riscv/include/asm/cacheflush.h |  2 ++
 arch/riscv/kernel/setup.c           |  1 +
 arch/riscv/mm/dma-noncoherent.c     |  8 ++++++++
 5 files changed, 26 insertions(+)
Signature · 1 line
2.40.1
#1 lore raw

PATCH v3 1/2 riscv: allow kmalloc() caches aligned to the smallest value

Currently, riscv defines ARCH_DMA_MINALIGN as L1_CACHE_BYTES, I.E 64Bytes, if CONFIG_RISCV_DMA_NONCOHERENT=y. To support unified kernel Image, usually we have to enable CONFIG_RISCV_DMA_NONCOHERENT, thus it brings some bad effects to coherent platforms:

Firstly, it wastes memory, kmalloc-96, kmalloc-32, kmalloc-16 and kmalloc-8 slab caches don't exist any more, they are replaced with either kmalloc-128 or kmalloc-64.

Secondly, larger than necessary kmalloc aligned allocations results in unnecessary cache/TLB pressure.

This issue also exists on arm64 platforms. From last year, Catalin tried to solve this issue by decoupling ARCH_KMALLOC_MINALIGN from ARCH_DMA_MINALIGN, limiting kmalloc() minimum alignment to dma_get_cache_alignment() and replacing ARCH_KMALLOC_MINALIGN usage in various drivers with ARCH_DMA_MINALIGN etc.[1]

One fact we can make use of for riscv: if the CPU doesn't support ZICBOM or T-HEAD CMO, we know the platform is coherent. Based on Catalin's work and above fact, we can easily solve the kmalloc align issue for riscv: we can override dma_get_cache_alignment(), then let it return ARCH_DMA_MINALIGN at the beginning and return 1 once we know the underlying HW neither supports ZICBOM nor supports T-HEAD CMO.

So what about if the CPU supports ZICBOM or T-HEAD CMO, but all the devices are dma coherent? Well, we use ARCH_DMA_MINALIGN as the kmalloc minimum alignment, nothing changed in this case. This case can be improved in the future.

After this patch, a simple test of booting to a small buildroot rootfs on qemu shows:

kmalloc-96           5041    5041     96  ...
kmalloc-64           9606    9606     64  ...
kmalloc-32           5128    5128     32  ...
kmalloc-16           7682    7682     16  ...
kmalloc-8           10246   10246      8  ...

So we save about 1268KB memory. The saving will be much larger in normal OS env on real HW platforms.

---
 arch/riscv/include/asm/cache.h      | 14 ++++++++++++++
 arch/riscv/include/asm/cacheflush.h |  2 ++
 arch/riscv/kernel/setup.c           |  1 +
 arch/riscv/mm/dma-noncoherent.c     |  8 ++++++++
 4 files changed, 25 insertions(+)
arch/riscv/include/asm/cache.h +14 -0
index d3036df23ccb..2174fe7bac9a 100644
@@ -13,6 +13,7 @@
 
 #ifdef CONFIG_RISCV_DMA_NONCOHERENT
 #define ARCH_DMA_MINALIGN L1_CACHE_BYTES
+#define ARCH_KMALLOC_MINALIGN	(8)
 #endif
 
 /*
@@ -23,4 +24,17 @@
 #define ARCH_SLAB_MINALIGN	16
 #endif
 
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_RISCV_DMA_NONCOHERENT
+extern int dma_cache_alignment;
+#define dma_get_cache_alignment dma_get_cache_alignment
+static inline int dma_get_cache_alignment(void)
+{
+	return dma_cache_alignment;
+}
+#endif
+
+#endif	/* __ASSEMBLY__ */
+
 #endif /* _ASM_RISCV_CACHE_H */
arch/riscv/include/asm/cacheflush.h +2 -0
index 8091b8bf4883..c640ab6f843b 100644
@@ -55,8 +55,10 @@ void riscv_init_cbo_blocksizes(void);
 
 #ifdef CONFIG_RISCV_DMA_NONCOHERENT
 void riscv_noncoherent_supported(void);
+void __init riscv_set_dma_cache_alignment(void);
 #else
 static inline void riscv_noncoherent_supported(void) {}
+static inline void riscv_set_dma_cache_alignment(void) {}
 #endif
 
 /*
arch/riscv/kernel/setup.c +1 -0
index 971fe776e2f8..027879b1557a 100644
@@ -311,6 +311,7 @@ void __init setup_arch(char **cmdline_p)
 	if (IS_ENABLED(CONFIG_RISCV_ISA_ZICBOM) &&
 	    riscv_isa_extension_available(NULL, ZICBOM))
 		riscv_noncoherent_supported();
+	riscv_set_dma_cache_alignment();
 }
 
 static int __init topology_init(void)
arch/riscv/mm/dma-noncoherent.c +8 -0
index d51a75864e53..811227e54bbd 100644
@@ -11,6 +11,8 @@
 #include <asm/cacheflush.h>
 
 static bool noncoherent_supported __ro_after_init;
+int dma_cache_alignment __ro_after_init = ARCH_DMA_MINALIGN;
+EXPORT_SYMBOL_GPL(dma_cache_alignment);
 
 void arch_sync_dma_for_device(phys_addr_t paddr, size_t size,
 			      enum dma_data_direction dir)
@@ -78,3 +80,9 @@ void riscv_noncoherent_supported(void)
 	     "Non-coherent DMA support enabled without a block size\n");
 	noncoherent_supported = true;
 }
+
+void __init riscv_set_dma_cache_alignment(void)
+{
+	if (!noncoherent_supported)
+		dma_cache_alignment = 1;
+}
Signature · 1 line
2.40.1
#3 lore raw

PATCH v3 2/2 riscv: enable DMA_BOUNCE_UNALIGNED_KMALLOC for !dma_coherent

In reply to Jisheng Zhang

With the DMA bouncing of unaligned kmalloc() buffers now in place, enable it for riscv when RISCV_DMA_NONCOHERENT=y to allow the kmalloc-{8,16,32,96} caches. Since RV32 doesn't enable SWIOTLB yet, and I didn't see any dma noncoherent RV32 platforms in the mainline, so skip RV32 now by only enabling DMA_BOUNCE_UNALIGNED_KMALLOC if SWIOTLB is available. Once we see such requirement on RV32, we can enable it then.

NOTE: we didn't force to create the swiotlb buffer even when the end of RAM is within the 32-bit physical address range. That's to say:
For RV64 with > 4GB memory, the feature is enabled.
For RV64 with <= 4GB memory, the feature isn't enabled by default. We rely on users to pass "swiotlb=mmnn,force" where mmnn is the Number of I/O TLB slabs, see kernel-parameters.txt for details.

Tested on Sipeed Lichee Pi 4A with 8GB DDR and Sipeed M1S BL808 Dock board.

---
 arch/riscv/Kconfig | 1 +
 1 file changed, 1 insertion(+)
arch/riscv/Kconfig +1 -0
index 4c07b9189c86..6681bd6ed2d7 100644
@@ -267,6 +267,7 @@ config RISCV_DMA_NONCOHERENT
 	select ARCH_HAS_SETUP_DMA_OPS
 	select ARCH_HAS_SYNC_DMA_FOR_CPU
 	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
+	select DMA_BOUNCE_UNALIGNED_KMALLOC if SWIOTLB
 	select DMA_DIRECT_REMAP
 
 config AS_HAS_INSN
Signature · 1 line
2.40.1
Reviewed-by on v3 1/2
#2 lore raw

Re: [PATCH v3 1/2] riscv: allow kmalloc() caches aligned to the smallest value

In reply to Jisheng Zhang
Quoted 39 lines · Jisheng Zhang

Currently, riscv defines ARCH_DMA_MINALIGN as L1_CACHE_BYTES, I.E 64Bytes, if CONFIG_RISCV_DMA_NONCOHERENT=y. To support unified kernel Image, usually we have to enable CONFIG_RISCV_DMA_NONCOHERENT, thus it brings some bad effects to coherent platforms:

Firstly, it wastes memory, kmalloc-96, kmalloc-32, kmalloc-16 and kmalloc-8 slab caches don't exist any more, they are replaced with either kmalloc-128 or kmalloc-64.

Secondly, larger than necessary kmalloc aligned allocations results in unnecessary cache/TLB pressure.

This issue also exists on arm64 platforms. From last year, Catalin tried to solve this issue by decoupling ARCH_KMALLOC_MINALIGN from ARCH_DMA_MINALIGN, limiting kmalloc() minimum alignment to dma_get_cache_alignment() and replacing ARCH_KMALLOC_MINALIGN usage in various drivers with ARCH_DMA_MINALIGN etc.[1]

One fact we can make use of for riscv: if the CPU doesn't support ZICBOM or T-HEAD CMO, we know the platform is coherent. Based on Catalin's work and above fact, we can easily solve the kmalloc align issue for riscv: we can override dma_get_cache_alignment(), then let it return ARCH_DMA_MINALIGN at the beginning and return 1 once we know the underlying HW neither supports ZICBOM nor supports T-HEAD CMO.

So what about if the CPU supports ZICBOM or T-HEAD CMO, but all the devices are dma coherent? Well, we use ARCH_DMA_MINALIGN as the kmalloc minimum alignment, nothing changed in this case. This case can be improved in the future.

After this patch, a simple test of booting to a small buildroot rootfs on qemu shows:

kmalloc-96           5041    5041     96  ...
kmalloc-64           9606    9606     64  ...
kmalloc-32           5128    5128     32  ...
kmalloc-16           7682    7682     16  ...
kmalloc-8           10246   10246      8  ...
Quoted 6 lines

So we save about 1268KB memory. The saving will be much larger in normal OS env on real HW platforms.

Thanks,
Conor.

#4 lore raw
In reply to Jisheng Zhang
This series was applied to riscv/linux.git (for-next) by Palmer Dabbelt <[email protected]>:

Hello:

This series was applied to riscv/linux.git (for-next) by Palmer Dabbelt <[email protected]>:

Quoted 10 lines · On Tue, 18 Jul 2023 23:22:12 +0800 you wrote:

Currently, riscv defines ARCH_DMA_MINALIGN as L1_CACHE_BYTES, I.E 64Bytes, if CONFIG_RISCV_DMA_NONCOHERENT=y. To support unified kernel Image, usually we have to enable CONFIG_RISCV_DMA_NONCOHERENT, thus it brings some bad effects to coherent platforms:

Firstly, it wastes memory, kmalloc-96, kmalloc-32, kmalloc-16 and kmalloc-8 slab caches don't exist any more, they are replaced with either kmalloc-128 or kmalloc-64.

[...]

Here is the summary with links:
- [v3,1/2] riscv: allow kmalloc() caches aligned to the smallest value

    https://git.kernel.org/riscv/c/2926715163cf
  - [v3,2/2] riscv: enable DMA_BOUNCE_UNALIGNED_KMALLOC for !dma_coherent
    https://git.kernel.org/riscv/c/f51f7a0fc2f4

You are awesome, thank you!

Signature · 9 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html



_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv