Skip to contentSkip to conversation

mlxbf_gige: Fix kernel panic at shutdown

PATCH Superseded Asmaa Mnebhi 2 participants 3 messages Jul 20, 2023 – Jul 21, 2023

Subsystems (2)

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 mlxbf_gige: Fix kernel panic at shutdown

There is a race condition happening during shutdown due to pending napi transactions. Since mlxbf_gige_poll is still running, it tries to access a NULL pointer and as a result causes a kernel panic. To fix this during shutdown, invoke mlxbf_gige_remove to disable and dequeue napi.

Fixes f92e1869d74e ("Add Mellanox BlueField Gigabit Ethernet driver")

---
v2-v3:
- remove mlxbf_gige_shutdown() since it is redundant with mlxbf_gige_remove().
v1->v2:
- fixed the tag from net-next to net
- check that the "priv" pointer is not NULL in mlxbf_gige_remove()

 .../ethernet/mellanox/mlxbf_gige/mlxbf_gige_main.c  | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)
drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_main.c +4 -9
index 694de9513b9f..31b84d6417de 100644
@@ -475,6 +475,9 @@ static int mlxbf_gige_remove(struct platform_device *pdev)
 {
 	struct mlxbf_gige *priv = platform_get_drvdata(pdev);
 
+	if (!priv)
+		return 0;
+
 	unregister_netdev(priv->netdev);
 	phy_disconnect(priv->netdev->phydev);
 	mlxbf_gige_mdio_remove(priv);
@@ -483,14 +486,6 @@ static int mlxbf_gige_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static void mlxbf_gige_shutdown(struct platform_device *pdev)
-{
-	struct mlxbf_gige *priv = platform_get_drvdata(pdev);
-
-	writeq(0, priv->base + MLXBF_GIGE_INT_EN);
-	mlxbf_gige_clean_port(priv);
-}
-
 static const struct acpi_device_id __maybe_unused mlxbf_gige_acpi_match[] = {
 	{ "MLNXBF17", 0 },
 	{},
@@ -500,7 +495,7 @@ MODULE_DEVICE_TABLE(acpi, mlxbf_gige_acpi_match);
 static struct platform_driver mlxbf_gige_driver = {
 	.probe = mlxbf_gige_probe,
 	.remove = mlxbf_gige_remove,
-	.shutdown = mlxbf_gige_shutdown,
+	.shutdown = mlxbf_gige_remove,
 	.driver = {
 		.name = KBUILD_MODNAME,
 		.acpi_match_table = ACPI_PTR(mlxbf_gige_acpi_match),
Signature · 1 line
2.30.1
#1 lore raw

drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_main.c MODULE_DEVICE_TABLE(acpi, mlxbf_gige_acpi_match); · line 498

Quoted 4 lines
drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_main.c +1 -1
 	.probe = mlxbf_gige_probe,
 	.remove = mlxbf_gige_remove,
-	.shutdown = mlxbf_gige_shutdown,
+	.shutdown = mlxbf_gige_remove,

Actually, apologies for this commit in response to Sridhar's comment on v2. This will not work. Mlxbf_gige_remove() returns void while ".shutdown" expects to return an int. Please advise on how to proceed. Should I send a v4 with the same patch as v2?

maintainer
#2 lore raw
Quoted 9 lines · On Thu, 20 Jul 2023 21:11:53 +0000 Asmaa Mnebhi wrote:

drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_main.c MODULE_DEVICE_TABLE(acpi, mlxbf_gige_acpi_match); · line 498

Quoted 4 lines
drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_main.c +1 -1
 	.probe = mlxbf_gige_probe,
 	.remove = mlxbf_gige_remove,
-	.shutdown = mlxbf_gige_shutdown,
+	.shutdown = mlxbf_gige_remove,  

Actually, apologies for this commit in response to Sridhar's comment on v2. This will not work. Mlxbf_gige_remove() returns void while ".shutdown" expects to return an int. Please advise on how to proceed. Should I send a v4 with the same patch as v2?

You can make it work, there is a new version of remove upstream:

https://elixir.bootlin.com/linux/v6.5-rc2/source/include/linux/platform_device.h#L220

You can make them both void.

Signature · 1 line
pw-bot: cr