Skip to contentSkip to conversation

parport: gsc: remove DMA leftover code

PATCH In review Arnd Bergmann 4 participants 5 messages Jul 26, 2023 – Aug 3, 2023

Subsystems (2)
lore
Share & tools
lore
#1 lore raw

PATCH 2/2 parport: mfc3: avoid empty-body warning

In reply to Arnd Bergmann

From: Arnd Bergmann <[email protected]>

on m68k builds, the mfc3 driver causes a warning about an empty if() block:

drivers/parport/parport_mfc3.c: In function 'control_pc_to_mfc3':
drivers/parport/parport_mfc3.c:106:37: warning: suggest braces around empty body in an 'if' statement [-Wempty-body]

Remove it in favor of a simpler comment.

---
 drivers/parport/parport_mfc3.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/parport/parport_mfc3.c +1 -2
index f4d0da741e856..3d996e89a1c21 100644
@@ -102,8 +102,7 @@ static unsigned char control_pc_to_mfc3(unsigned char control)
 		ret |= 128;
 	if (control & PARPORT_CONTROL_AUTOFD) /* AUTOLF */
 		ret &= ~64;
-	if (control & PARPORT_CONTROL_STROBE) /* Strobe */
-		/* Handled directly by hardware */;
+	/* PARPORT_CONTROL_STROBE handled directly by hardware *t/
 	return ret;
 }
 
Signature · 1 line
2.39.2
#0 lore raw

PATCH 1/2 parport: gsc: remove DMA leftover code

From: Arnd Bergmann <[email protected]>

This driver does not actually work with DMA mode, but still tries to call ISA DMA interface functions that are stubbed out on parisc, resulting in a W=1 build warning:

drivers/parport/parport_gsc.c: In function 'parport_remove_chip':
drivers/parport/parport_gsc.c:389:20: warning: suggest braces around empty body in an 'if' statement [-Wempty-body]
389 | free_dma(p->dma);

Remove the corresponding code as a prerequisite for turning on -Wempty-body by default in all kernels.

---
 drivers/parport/parport_gsc.c | 28 ++++------------------------
 drivers/parport/parport_gsc.h |  7 -------
 2 files changed, 4 insertions(+), 31 deletions(-)
drivers/parport/parport_gsc.c +4 -24
index 0dcc497b0449a..5e4475254bd0a 100644
@@ -28,7 +28,6 @@
 #include <linux/sysctl.h>
 
 #include <asm/io.h>
-#include <asm/dma.h>
 #include <linux/uaccess.h>
 #include <asm/superio.h>
 
@@ -226,9 +225,9 @@ static int parport_PS2_supported(struct parport *pb)
 
 /* --- Initialisation code -------------------------------- */
 
-struct parport *parport_gsc_probe_port(unsigned long base,
+static struct parport *parport_gsc_probe_port(unsigned long base,
 				       unsigned long base_hi, int irq,
-				       int dma, struct parisc_device *padev)
+				       struct parisc_device *padev)
 {
 	struct parport_gsc_private *priv;
 	struct parport_operations *ops;
@@ -250,12 +249,9 @@ struct parport *parport_gsc_probe_port(unsigned long base,
 	}
 	priv->ctr = 0xc;
 	priv->ctr_writable = 0xff;
-	priv->dma_buf = NULL;
-	priv->dma_handle = 0;
 	p->base = base;
 	p->base_hi = base_hi;
 	p->irq = irq;
-	p->dma = dma;
 	p->modes = PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT;
 	p->ops = ops;
 	p->private_data = priv;
@@ -286,17 +282,9 @@ struct parport *parport_gsc_probe_port(unsigned long base,
 	if (p->irq == PARPORT_IRQ_AUTO) {
 		p->irq = PARPORT_IRQ_NONE;
 	}
-	if (p->irq != PARPORT_IRQ_NONE) {
+	if (p->irq != PARPORT_IRQ_NONE)
 		pr_cont(", irq %d", p->irq);
 
-		if (p->dma == PARPORT_DMA_AUTO) {
-			p->dma = PARPORT_DMA_NONE;
-		}
-	}
-	if (p->dma == PARPORT_DMA_AUTO) /* To use DMA, giving the irq
-                                           is mandatory (see above) */
-		p->dma = PARPORT_DMA_NONE;
-
 	pr_cont(" [");
 #define printmode(x)							\
 do {									\
@@ -321,7 +309,6 @@ do {									\
 			pr_warn("%s: irq %d in use, resorting to polled operation\n",
 				p->name, p->irq);
 			p->irq = PARPORT_IRQ_NONE;
-			p->dma = PARPORT_DMA_NONE;
 		}
 	}
 
@@ -369,8 +356,7 @@ static int __init parport_init_chip(struct parisc_device *dev)
 		pr_info("%s: enhanced parport-modes not supported\n", __func__);
 	}
 	
-	p = parport_gsc_probe_port(port, 0, dev->irq,
-			/* PARPORT_IRQ_NONE */ PARPORT_DMA_NONE, dev);
+	p = parport_gsc_probe_port(port, 0, dev->irq, dev);
 	if (p)
 		parport_count++;
 	dev_set_drvdata(&dev->dev, p);
@@ -382,16 +368,10 @@ static void __exit parport_remove_chip(struct parisc_device *dev)
 {
 	struct parport *p = dev_get_drvdata(&dev->dev);
 	if (p) {
-		struct parport_gsc_private *priv = p->private_data;
 		struct parport_operations *ops = p->ops;
 		parport_remove_port(p);
-		if (p->dma != PARPORT_DMA_NONE)
-			free_dma(p->dma);
 		if (p->irq != PARPORT_IRQ_NONE)
 			free_irq(p->irq, p);
-		if (priv->dma_buf)
-			dma_free_coherent(&priv->dev->dev, PAGE_SIZE,
-					  priv->dma_buf, priv->dma_handle);
 		kfree (p->private_data);
 		parport_put_port(p);
 		kfree (ops); /* hope no-one cached it */
drivers/parport/parport_gsc.h +0 -7
index 9301217edf12c..d447a568c2570 100644
@@ -63,8 +63,6 @@ struct parport_gsc_private {
 	int writeIntrThreshold;
 
 	/* buffer suitable for DMA, if DMA enabled */
-	char *dma_buf;
-	dma_addr_t dma_handle;
 	struct pci_dev *dev;
 };
 
@@ -199,9 +197,4 @@ extern void parport_gsc_inc_use_count(void);
 
 extern void parport_gsc_dec_use_count(void);
 
-extern struct parport *parport_gsc_probe_port(unsigned long base,
-						unsigned long base_hi,
-						int irq, int dma,
-						struct parisc_device *padev);
-
 #endif	/* __DRIVERS_PARPORT_PARPORT_GSC_H */
Signature · 1 line
2.39.2
#2 lore raw

Re: [PATCH 2/2] parport: mfc3: avoid empty-body warning

In reply to Arnd Bergmann

drivers/parport/parport_mfc3.c static unsigned char control_pc_to_mfc3(unsigned char control) · line 105

Quoted 3 lines · Arnd Bergmann

From: Arnd Bergmann <[email protected]>

drivers/parport/parport_mfc3.c +1 -0
+	/* PARPORT_CONTROL_STROBE handled directly by hardware *t/

Is there a typo with the *t/ in the end?

-Sohil

#3 lore raw

Re: [PATCH 2/2] parport: mfc3: avoid empty-body warning

In reply to Arnd Bergmann
kernel test robot noticed the following build warnings:

Hi Arnd,

kernel test robot noticed the following build warnings:

[auto build test WARNING on deller-parisc/for-next]
[also build test WARNING on linus/master v6.5-rc3 next-20230726] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Arnd-Bergmann/parport-mfc3-avoid-empty-body-warning/20230726-231357
base:   https://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux.git for-next
patch link:    https://lore.kernel.org/r/20230726150944.2265044-2-arnd%40kernel.org
patch subject: [PATCH 2/2] parport: mfc3: avoid empty-body warning
config: m68k-allyesconfig (https://download.01.org/0day-ci/archive/20230727/[email protected]/config)
compiler: m68k-linux-gcc (GCC) 12.3.0
reproduce: (https://download.01.org/0day-ci/archive/20230727/[email protected]/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/

All warnings (new ones prefixed by >>):

drivers/parport/parport_mfc3.c: In function 'control_pc_to_mfc3':

>> drivers/parport/parport_mfc3.c:114:28: warning: "/*" within comment [-Wcomment]
     114 |         if (control & 128) /* /INITP */
         |                             
   drivers/parport/parport_mfc3.c: In function 'mfc3_read_control':
   drivers/parport/parport_mfc3.c:132:16: error: implicit declaration of function 'control_mfc3_to_pc'; did you mean 'control_pc_to_mfc3'? [-Werror=implicit-function-declaration]
     132 |         return control_mfc3_to_pc(pia(p)->ppra & 0xe0);
         |                ^~~~~~~~~~~~~~~~~~
         |                control_pc_to_mfc3

cc1: some warnings being treated as errors

vim +114 drivers/parport/parport_mfc3.c

^1da177e4c3f41 Linus Torvalds 2005-04-16  108  
^1da177e4c3f41 Linus Torvalds 2005-04-16  109  static unsigned char control_mfc3_to_pc(unsigned char control)
^1da177e4c3f41 Linus Torvalds 2005-04-16  110  {
^1da177e4c3f41 Linus Torvalds 2005-04-16  111  	unsigned char ret = PARPORT_CONTROL_STROBE 
^1da177e4c3f41 Linus Torvalds 2005-04-16  112  			  | PARPORT_CONTROL_AUTOFD | PARPORT_CONTROL_SELECT;
^1da177e4c3f41 Linus Torvalds 2005-04-16  113  
^1da177e4c3f41 Linus Torvalds 2005-04-16 @114  	if (control & 128) /* /INITP */
^1da177e4c3f41 Linus Torvalds 2005-04-16  115  		ret |= PARPORT_CONTROL_INIT;
^1da177e4c3f41 Linus Torvalds 2005-04-16  116  	if (control & 64) /* /AUTOLF */
^1da177e4c3f41 Linus Torvalds 2005-04-16  117  		ret &= ~PARPORT_CONTROL_AUTOFD;
^1da177e4c3f41 Linus Torvalds 2005-04-16  118  	if (control & 32) /* /SELECT_IN */
^1da177e4c3f41 Linus Torvalds 2005-04-16  119  		ret &= ~PARPORT_CONTROL_SELECT;
^1da177e4c3f41 Linus Torvalds 2005-04-16  120  	return ret;
^1da177e4c3f41 Linus Torvalds 2005-04-16  121  }

^1da177e4c3f41 Linus Torvalds 2005-04-16 122

Signature · 2 lines
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
maintainer
#4 lore raw
In reply to Arnd Bergmann
Quoted 6 lines · Arnd Bergmann

From: Arnd Bergmann <[email protected]>

This driver does not actually work with DMA mode, but still tries to call ISA DMA interface functions that are stubbed out on parisc, resulting in a W=1 build warning:

Quoted 8 lines

drivers/parport/parport_gsc.c: In function 'parport_remove_chip':
drivers/parport/parport_gsc.c:389:20: warning: suggest braces around empty body in an 'if' statement [-Wempty-body]
389 | free_dma(p->dma);

Remove the corresponding code as a prerequisite for turning on -Wempty-body by default in all kernels.

Thanks Arnd!

I've added it to the parisc for-next git tree.

Helge

Quoted 119 lines
---
  drivers/parport/parport_gsc.c | 28 ++++------------------------
  drivers/parport/parport_gsc.h |  7 -------
  2 files changed, 4 insertions(+), 31 deletions(-)
drivers/parport/parport_gsc.c +4 -24
index 0dcc497b0449a..5e4475254bd0a 100644
@@ -28,7 +28,6 @@
  #include <linux/sysctl.h>
 
  #include <asm/io.h>
-#include <asm/dma.h>
  #include <linux/uaccess.h>
  #include <asm/superio.h>
 
@@ -226,9 +225,9 @@ static int parport_PS2_supported(struct parport *pb)
 
  /* --- Initialisation code -------------------------------- */
 
-struct parport *parport_gsc_probe_port(unsigned long base,
+static struct parport *parport_gsc_probe_port(unsigned long base,
  				       unsigned long base_hi, int irq,
-				       int dma, struct parisc_device *padev)
+				       struct parisc_device *padev)
  {
  	struct parport_gsc_private *priv;
  	struct parport_operations *ops;
@@ -250,12 +249,9 @@ struct parport *parport_gsc_probe_port(unsigned long base,
  	}
  	priv->ctr = 0xc;
  	priv->ctr_writable = 0xff;
-	priv->dma_buf = NULL;
-	priv->dma_handle = 0;
  	p->base = base;
  	p->base_hi = base_hi;
  	p->irq = irq;
-	p->dma = dma;
  	p->modes = PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT;
  	p->ops = ops;
  	p->private_data = priv;
@@ -286,17 +282,9 @@ struct parport *parport_gsc_probe_port(unsigned long base,
  	if (p->irq == PARPORT_IRQ_AUTO) {
  		p->irq = PARPORT_IRQ_NONE;
  	}
-	if (p->irq != PARPORT_IRQ_NONE) {
+	if (p->irq != PARPORT_IRQ_NONE)
  		pr_cont(", irq %d", p->irq);
 
-		if (p->dma == PARPORT_DMA_AUTO) {
-			p->dma = PARPORT_DMA_NONE;
-		}
-	}
-	if (p->dma == PARPORT_DMA_AUTO) /* To use DMA, giving the irq
-                                           is mandatory (see above) */
-		p->dma = PARPORT_DMA_NONE;
-
  	pr_cont(" [");
  #define printmode(x)							\
  do {									\
@@ -321,7 +309,6 @@ do {									\
  			pr_warn("%s: irq %d in use, resorting to polled operation\n",
  				p->name, p->irq);
  			p->irq = PARPORT_IRQ_NONE;
-			p->dma = PARPORT_DMA_NONE;
  		}
  	}
 
@@ -369,8 +356,7 @@ static int __init parport_init_chip(struct parisc_device *dev)
  		pr_info("%s: enhanced parport-modes not supported\n", __func__);
  	}
 
-	p = parport_gsc_probe_port(port, 0, dev->irq,
-			/* PARPORT_IRQ_NONE */ PARPORT_DMA_NONE, dev);
+	p = parport_gsc_probe_port(port, 0, dev->irq, dev);
  	if (p)
  		parport_count++;
  	dev_set_drvdata(&dev->dev, p);
@@ -382,16 +368,10 @@ static void __exit parport_remove_chip(struct parisc_device *dev)
  {
  	struct parport *p = dev_get_drvdata(&dev->dev);
  	if (p) {
-		struct parport_gsc_private *priv = p->private_data;
  		struct parport_operations *ops = p->ops;
  		parport_remove_port(p);
-		if (p->dma != PARPORT_DMA_NONE)
-			free_dma(p->dma);
  		if (p->irq != PARPORT_IRQ_NONE)
  			free_irq(p->irq, p);
-		if (priv->dma_buf)
-			dma_free_coherent(&priv->dev->dev, PAGE_SIZE,
-					  priv->dma_buf, priv->dma_handle);
  		kfree (p->private_data);
  		parport_put_port(p);
  		kfree (ops); /* hope no-one cached it */
drivers/parport/parport_gsc.h +0 -7
index 9301217edf12c..d447a568c2570 100644
@@ -63,8 +63,6 @@ struct parport_gsc_private {
  	int writeIntrThreshold;
 
  	/* buffer suitable for DMA, if DMA enabled */
-	char *dma_buf;
-	dma_addr_t dma_handle;
  	struct pci_dev *dev;
  };
 
@@ -199,9 +197,4 @@ extern void parport_gsc_inc_use_count(void);
 
  extern void parport_gsc_dec_use_count(void);
 
-extern struct parport *parport_gsc_probe_port(unsigned long base,
-						unsigned long base_hi,
-						int irq, int dma,
-						struct parisc_device *padev);
-
  #endif	/* __DRIVERS_PARPORT_PARPORT_GSC_H */