FAILED: patch "[PATCH] usb: typec: altmodes/displayport: Signal hpd when configuring" failed to apply to 5.4-stable tree

The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y
git checkout FETCH_HEAD
git cherry-pick -x 5a5ccd61cfd76156cb3e0373c300c509d05448ce
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2023081242-stool-provable-2192@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^..

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 5a5ccd61cfd76156cb3e0373c300c509d05448ce Mon Sep 17 00:00:00 2001
From: RD Babiera <[email protected]>
Date: Wed, 26 Jul 2023 02:09:02 +0000
Subject: [PATCH] usb: typec: altmodes/displayport: Signal hpd when configuring
pin assignment

When connecting to some DisplayPort partners, the initial status update after entering DisplayPort Alt Mode notifies that the DFP_D/UFP_D is not in the connected state. This leads to sending a configure message that keeps the device in USB mode. The port partner then sets DFP_D/UFP_D to the connected state and HPD to high in the same Attention message. Currently, the HPD signal is dropped in order to handle configuration.

This patch saves changes to the HPD signal when the device chooses to configure during dp_altmode_status_update, and invokes sysfs_notify if necessary for HPD after configuring.

index 66de880b28d0..cdf8261e22db 100644
@@ -60,6 +60,7 @@ struct dp_altmode {
 
 	enum dp_state state;
 	bool hpd;
+	bool pending_hpd;
 
 	struct mutex lock; /* device lock */
 	struct work_struct work;

@@ -144,8 +145,13 @@ static int dp_altmode_status_update(struct dp_altmode *dp)
 		dp->state = DP_STATE_EXIT;
 	} else if (!(con & DP_CONF_CURRENTLY(dp->data.conf))) {
 		ret = dp_altmode_configure(dp, con);
-		if (!ret)
+		if (!ret) {
 			dp->state = DP_STATE_CONFIGURE;
+			if (dp->hpd != hpd) {
+				dp->hpd = hpd;
+				dp->pending_hpd = true;
+			}
+		}
 	} else {
 		if (dp->hpd != hpd) {
 			drm_connector_oob_hotplug_event(dp->connector_fwnode);

@@ -161,6 +167,16 @@ static int dp_altmode_configured(struct dp_altmode *dp)
 {
 	sysfs_notify(&dp->alt->dev.kobj, "displayport", "configuration");
 	sysfs_notify(&dp->alt->dev.kobj, "displayport", "pin_assignment");
+	/*
+	 * If the DFP_D/UFP_D sends a change in HPD when first notifying the
+	 * DisplayPort driver that it is connected, then we wait until
+	 * configuration is complete to signal HPD.
+	 */
+	if (dp->pending_hpd) {
+		drm_connector_oob_hotplug_event(dp->connector_fwnode);
+		sysfs_notify(&dp->alt->dev.kobj, "displayport", "hpd");
+		dp->pending_hpd = false;
+	}
 
 	return dp_altmode_notify(dp);
 }