leds: max5970: Add support for max5970
PATCH RESEND v3 1/1 leds: max5970: Add support for max5970
From: Patrick Rudolph <[email protected]>
The MAX5970 is hot swap controller and has 4 indication LED.
Signed-off-by Patrick Rudolph <[email protected]>
Signed-off-by Naresh Solanki <[email protected]>
---
Changes in V3:
- Drop array for ddata variable.
Changes in V2:
- Add of_node_put before return.
- Code cleanup
- Refactor code & remove max5970_setup_led function.
--- drivers/leds/Kconfig | 11 ++++ drivers/leds/Makefile | 1 + drivers/leds/leds-max5970.c | 110 ++++++++++++++++++++++++++++++++++++ 3 files changed, 122 insertions(+) create mode 100644 drivers/leds/leds-max5970.c
drivers/leds/Kconfig +11 -0
@@ -637,6 +637,17 @@ config LEDS_ADP5520 To compile this driver as a module, choose M here: the module will be called leds-adp5520. +config LEDS_MAX5970 + tristate "LED Support for Maxim 5970" + depends on LEDS_CLASS + depends on MFD_MAX5970 + help + This option enables support for the Maxim MAX5970 & MAX5978 smart + switch indication LEDs via the I2C bus. + + To compile this driver as a module, choose M here: the module will + be called leds-max5970. + config LEDS_MC13783 tristate "LED Support for MC13XXX PMIC" depends on LEDS_CLASS
drivers/leds/Makefile +1 -0
@@ -56,6 +56,7 @@ obj-$(CONFIG_LEDS_LP8501) += leds-lp8501.o obj-$(CONFIG_LEDS_LP8788) += leds-lp8788.o obj-$(CONFIG_LEDS_LP8860) += leds-lp8860.o obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o +obj-$(CONFIG_LEDS_MAX5970) += leds-max5970.o obj-$(CONFIG_LEDS_MAX77650) += leds-max77650.o obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o
drivers/leds/leds-max5970.c new file +110 -0
110 lines not on this page · raw message
base-commit: baca986e1f2c31f8e4b2a6d99d47c3bc844033e8
Signature · 1 line
2.41.0