6.4.14-rc1 review

This is the start of the stable review cycle for the 6.4.14 release. There are 9 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat, 02 Sep 2023 11:11:18 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.4.14-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 6.4.14-rc1

Yonghong Song <[email protected]>
kallsyms: Fix kallsyms_selftest failure

Helge Deller <[email protected]>
parisc: sys_parisc: parisc_personality() is called from asm code

Helge Deller <[email protected]>
lockdep: fix static memory detection even more

James Morse <[email protected]>
ARM: module: Use module_init_layout_section() to spot init sections

James Morse <[email protected]>
arm64: module: Use module_init_layout_section() to spot init sections

Arnd Bergmann <[email protected]>
arm64: module-plts: inline linux/moduleloader.h

James Morse <[email protected]>
module: Expose module_init_layout_section()

Andrea Righi <[email protected]>
module/decompress: use vmalloc() for zstd decompression workspace

Mario Limonciello <[email protected]>
ACPI: thermal: Drop nocrt parameter

-------------

Diffstat:

 Documentation/admin-guide/kernel-parameters.txt |  4 ---
 Makefile                                        |  4 +--
 arch/arm/kernel/module-plts.c                   |  2 +-
 arch/arm64/kernel/module-plts.c                 |  3 ++-
 arch/parisc/kernel/sys_parisc.c                 |  3 ++-
 arch/x86/include/asm/sections.h                 | 18 -------------
 drivers/acpi/thermal.c                          |  6 +----
 include/linux/moduleloader.h                    |  5 ++++
 kernel/kallsyms.c                               | 17 +++++-------
 kernel/kallsyms_selftest.c                      | 23 +---------------
 kernel/locking/lockdep.c                        | 36 ++++++++++---------------
 kernel/module/decompress.c                      |  4 +--
 kernel/module/main.c                            |  2 +-
 13 files changed, 38 insertions(+), 89 deletions(-)

6.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andrea Righi <[email protected]>

commit a419beac4a070aff63c520f36ebf7cb8a76a8ae5 upstream.

Using kmalloc() to allocate the decompression workspace for zstd may trigger the following warning when large modules are loaded (i.e., xfs):

[    2.961884] WARNING: CPU: 1 PID: 254 at mm/page_alloc.c:4453 __alloc_pages+0x2c3/0x350
...
[    2.989033] Call Trace:
[    2.989841]  <TASK>
[    2.990614]  ? show_regs+0x6d/0x80
[    2.991573]  ? __warn+0x89/0x160
[    2.992485]  ? __alloc_pages+0x2c3/0x350
[    2.993520]  ? report_bug+0x17e/0x1b0
[    2.994506]  ? handle_bug+0x51/0xa0
[    2.995474]  ? exc_invalid_op+0x18/0x80
[    2.996469]  ? asm_exc_invalid_op+0x1b/0x20
[    2.997530]  ? module_zstd_decompress+0xdc/0x2a0
[    2.998665]  ? __alloc_pages+0x2c3/0x350
[    2.999695]  ? module_zstd_decompress+0xdc/0x2a0
[    3.000821]  __kmalloc_large_node+0x7a/0x150
[    3.001920]  __kmalloc+0xdb/0x170
[    3.002824]  module_zstd_decompress+0xdc/0x2a0
[    3.003857]  module_decompress+0x37/0xc0
[    3.004688]  init_module_from_file+0xd0/0x100
[    3.005668]  idempotent_init_module+0x11c/0x2b0
[    3.006632]  __x64_sys_finit_module+0x64/0xd0
[    3.007568]  do_syscall_64+0x59/0x90
[    3.008373]  ? ksys_read+0x73/0x100
[    3.009395]  ? exit_to_user_mode_prepare+0x30/0xb0
[    3.010531]  ? syscall_exit_to_user_mode+0x37/0x60
[    3.011662]  ? do_syscall_64+0x68/0x90
[    3.012511]  ? do_syscall_64+0x68/0x90
[    3.013364]  entry_SYSCALL_64_after_hwframe+0x6e/0xd8

However, continuous physical memory does not seem to be required in module_zstd_decompress(), so use vmalloc() instead, to prevent the warning and avoid potential failures at loading compressed modules.

---
 kernel/module/decompress.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -241,7 +241,7 @@ static ssize_t module_zstd_decompress(st
 	}
 
 	wksp_size = zstd_dstream_workspace_bound(header.windowSize);
-	wksp = kmalloc(wksp_size, GFP_KERNEL);
+	wksp = vmalloc(wksp_size);
 	if (!wksp) {
 		retval = -ENOMEM;
 		goto out;

@@ -284,7 +284,7 @@ static ssize_t module_zstd_decompress(st
 	retval = new_size;
 
  out:
-	kfree(wksp);
+	vfree(wksp);
 	return retval;
 }
 #else

6.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: James Morse <[email protected]>

commit 2abcc4b5a64a65a2d2287ba0be5c2871c1552416 upstream.

module_init_layout_section() choses whether the core module loader considers a section as init or not. This affects the placement of the exit section when module unloading is disabled. This code will never run, so it can be free()d once the module has been initialised.

arm and arm64 need to count the number of PLTs they need before applying relocations based on the section name. The init PLTs are stored separately so they can be free()d. arm and arm64 both use within_module_init() to decide which list of PLTs to use when applying the relocation.

Because within_module_init()'s behaviour changes when module unloading is disabled, both architecture would need to take this into account when counting the PLTs.

Today neither architecture does this, meaning when module unloading is disabled there are insufficient PLTs in the init section to load some modules, resulting in warnings:

| WARNING: CPU: 2 PID: 51 at arch/arm64/kernel/module-plts.c:99 module_emit_plt_entry+0x184/0x1cc
| Modules linked in: crct10dif_common
| CPU: 2 PID: 51 Comm: modprobe Not tainted 6.5.0-rc4-yocto-standard-dirty #15208
| Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
| pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : module_emit_plt_entry+0x184/0x1cc
| lr : module_emit_plt_entry+0x94/0x1cc
| sp : ffffffc0803bba60
[...]
| Call trace:
|  module_emit_plt_entry+0x184/0x1cc
|  apply_relocate_add+0x2bc/0x8e4
|  load_module+0xe34/0x1bd4
|  init_module_from_file+0x84/0xc0
|  __arm64_sys_finit_module+0x1b8/0x27c
|  invoke_syscall.constprop.0+0x5c/0x104
|  do_el0_svc+0x58/0x160
|  el0_svc+0x38/0x110
|  el0t_64_sync_handler+0xc0/0xc4
|  el0t_64_sync+0x190/0x194

Instead of duplicating module_init_layout_section()s logic, expose it.

---
 include/linux/moduleloader.h |    5 +++++
 kernel/module/main.c         |    2 +-
 2 files changed, 6 insertions(+), 1 deletion(-)

@@ -42,6 +42,11 @@ bool module_init_section(const char *nam
  */
 bool module_exit_section(const char *name);
 
+/* Describes whether within_module_init() will consider this an init section
+ * or not. This behaviour changes with CONFIG_MODULE_UNLOAD.
+ */
+bool module_init_layout_section(const char *sname);
+
 /*
  * Apply the given relocation to the (simplified) ELF.  Return -error
  * or 0.

@@ -1491,7 +1491,7 @@ long module_get_offset_and_type(struct m
 	return offset | mask;
 }
 
-static bool module_init_layout_section(const char *sname)
+bool module_init_layout_section(const char *sname)
 {
 #ifndef CONFIG_MODULE_UNLOAD
 	if (module_exit_section(sname))

6.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <[email protected]>

commit 60a0aab7463ee69296692d980b96510ccce3934e upstream.

module_frob_arch_sections() is declared in moduleloader.h, but that is not included before the definition:

arch/arm64/kernel/module-plts.c:286:5: error: no previous prototype for 'module_frob_arch_sections' [-Werror=missing-prototypes]

---
 arch/arm64/kernel/module-plts.c |    1 +
 1 file changed, 1 insertion(+)

@@ -7,6 +7,7 @@
 #include <linux/ftrace.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/moduleloader.h>
 #include <linux/sort.h>
 
 static struct plt_entry __get_adrp_add_pair(u64 dst, u64 pc,

6.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: James Morse <[email protected]>

commit f928f8b1a2496e7af95b860f9acf553f20f68f16 upstream.

Today module_frob_arch_sections() spots init sections from their 'init' prefix, and uses this to keep the init PLTs separate from the rest.

module_emit_plt_entry() uses within_module_init() to determine if a location is in the init text or not, but this depends on whether core code thought this was an init section.

Naturally the logic is different.

module_init_layout_section() groups the init and exit text together if module unloading is disabled, as the exit code will never run. The result is kernels with this configuration can't load all their modules because there are not enough PLTs for the combined init+exit section.

This results in the following:

| WARNING: CPU: 2 PID: 51 at arch/arm64/kernel/module-plts.c:99 module_emit_plt_entry+0x184/0x1cc
| Modules linked in: crct10dif_common
| CPU: 2 PID: 51 Comm: modprobe Not tainted 6.5.0-rc4-yocto-standard-dirty #15208
| Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
| pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : module_emit_plt_entry+0x184/0x1cc
| lr : module_emit_plt_entry+0x94/0x1cc
| sp : ffffffc0803bba60
[...]
| Call trace:
|  module_emit_plt_entry+0x184/0x1cc
|  apply_relocate_add+0x2bc/0x8e4
|  load_module+0xe34/0x1bd4
|  init_module_from_file+0x84/0xc0
|  __arm64_sys_finit_module+0x1b8/0x27c
|  invoke_syscall.constprop.0+0x5c/0x104
|  do_el0_svc+0x58/0x160
|  el0_svc+0x38/0x110
|  el0t_64_sync_handler+0xc0/0xc4
|  el0t_64_sync+0x190/0x194

A previous patch exposed module_init_layout_section(), use that so the logic is the same.

---
 arch/arm64/kernel/module-plts.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -339,7 +339,7 @@ int module_frob_arch_sections(Elf_Ehdr *
 		if (nents)
 			sort(rels, nents, sizeof(Elf64_Rela), cmp_rela, NULL);
 
-		if (!str_has_prefix(secstrings + dstsec->sh_name, ".init"))
+		if (!module_init_layout_section(secstrings + dstsec->sh_name))
 			core_plts += count_plts(syms, rels, numrels,
 						sechdrs[i].sh_info, dstsec);
 		else

6.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: James Morse <[email protected]>

commit a6846234f45801441f0e31a8b37f901ef0abd2df upstream.

Today module_frob_arch_sections() spots init sections from their 'init' prefix, and uses this to keep the init PLTs separate from the rest.

get_module_plt() uses within_module_init() to determine if a location is in the init text or not, but this depends on whether core code thought this was an init section.

Naturally the logic is different.

module_init_layout_section() groups the init and exit text together if module unloading is disabled, as the exit code will never run. The result is kernels with this configuration can't load all their modules because there are not enough PLTs for the combined init+exit section.

A previous patch exposed module_init_layout_section(), use that so the logic is the same.

---
 arch/arm/kernel/module-plts.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -251,7 +251,7 @@ int module_frob_arch_sections(Elf_Ehdr *
 		/* sort by type and symbol index */
 		sort(rels, numrels, sizeof(Elf32_Rel), cmp_rel, NULL);
 
-		if (strncmp(secstrings + dstsec->sh_name, ".init", 5) != 0)
+		if (!module_init_layout_section(secstrings + dstsec->sh_name))
 			core_plts += count_plts(syms, dstsec->sh_addr, rels,
 						numrels, s->sh_info);
 		else

6.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Helge Deller <[email protected]>

commit 0a6b58c5cd0dfd7961e725212f0fc8dfc5d96195 upstream.

On the parisc architecture, lockdep reports for all static objects which are in the __initdata section (e.g. "setup_done" in devtmpfs, "kthreadd_done" in init/main.c) this warning:

INFO: trying to register non-static key.

The warning itself is wrong, because those objects are in the __initdata section, but the section itself is on parisc outside of range from _stext to _end, which is why the static_obj() functions returns a wrong answer.

While fixing this issue, I noticed that the whole existing check can be simplified a lot.
Instead of checking against the _stext and _end symbols (which include code areas too) just check for the .data and .bss segments (since we check a data object). This can be done with the existing is_kernel_core_data() macro.

In addition objects in the __initdata section can be checked with init_section_contains(), and is_kernel_rodata() allows keys to be in the _ro_after_init section.

This partly reverts and simplifies commit bac59d18c701 ("x86/setup: Fix static memory detection").

---
 arch/x86/include/asm/sections.h |   18 ------------------
 kernel/locking/lockdep.c        |   36 ++++++++++++++----------------------
 2 files changed, 14 insertions(+), 40 deletions(-)

@@ -2,8 +2,6 @@
 #ifndef _ASM_X86_SECTIONS_H
 #define _ASM_X86_SECTIONS_H
 
-#define arch_is_kernel_initmem_freed arch_is_kernel_initmem_freed
-
 #include <asm-generic/sections.h>
 #include <asm/extable.h>
 

@@ -18,20 +16,4 @@ extern char __end_of_kernel_reserve[];
 
 extern unsigned long _brk_start, _brk_end;
 
-static inline bool arch_is_kernel_initmem_freed(unsigned long addr)
-{
-	/*
-	 * If _brk_start has not been cleared, brk allocation is incomplete,
-	 * and we can not make assumptions about its use.
-	 */
-	if (_brk_start)
-		return 0;
-
-	/*
-	 * After brk allocation is complete, space between _brk_end and _end
-	 * is available for allocation.
-	 */
-	return addr >= _brk_end && addr < (unsigned long)&_end;
-}
-
 #endif	/* _ASM_X86_SECTIONS_H */

@@ -817,34 +817,26 @@ static int very_verbose(struct lock_clas
  * Is this the address of a static object:
  */
 #ifdef __KERNEL__
-/*
- * Check if an address is part of freed initmem. After initmem is freed,
- * memory can be allocated from it, and such allocations would then have
- * addresses within the range [_stext, _end].
- */
-#ifndef arch_is_kernel_initmem_freed
-static int arch_is_kernel_initmem_freed(unsigned long addr)
-{
-	if (system_state < SYSTEM_FREEING_INITMEM)
-		return 0;
-
-	return init_section_contains((void *)addr, 1);
-}
-#endif
-
 static int static_obj(const void *obj)
 {
-	unsigned long start = (unsigned long) &_stext,
-		      end   = (unsigned long) &_end,
-		      addr  = (unsigned long) obj;
+	unsigned long addr = (unsigned long) obj;
 
-	if (arch_is_kernel_initmem_freed(addr))
-		return 0;
+	if (is_kernel_core_data(addr))
+		return 1;
+
+	/*
+	 * keys are allowed in the __ro_after_init section.
+	 */
+	if (is_kernel_rodata(addr))
+		return 1;
 
 	/*
-	 * static variable?
+	 * in initdata section and used during bootup only?
+	 * NOTE: On some platforms the initdata section is
+	 * outside of the _stext ... _end range.
 	 */
-	if ((addr >= start) && (addr < end))
+	if (system_state < SYSTEM_FREEING_INITMEM &&
+		init_section_contains((void *)addr, 1))
 		return 1;
 
 	/*

6.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Helge Deller <[email protected]>

commit b5d89408b9fb21258f7c371d6d48a674f60f7181 upstream.

---
 arch/parisc/kernel/sys_parisc.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -24,6 +24,7 @@
 #include <linux/personality.h>
 #include <linux/random.h>
 #include <linux/compat.h>
+#include <linux/elf-randomize.h>
 
 /*
  * Construct an artificial page offset for the mapping based on the physical

@@ -339,7 +340,7 @@ asmlinkage long parisc_fallocate(int fd,
 			      ((u64)lenhi << 32) | lenlo);
 }
 
-long parisc_personality(unsigned long personality)
+asmlinkage long parisc_personality(unsigned long personality)
 {
 	long err;
 

6.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yonghong Song <[email protected]>

commit 33f0467fe06934d5e4ea6e24ce2b9c65ce618e26 upstream.

Kernel test robot reported a kallsyms_test failure when clang lto is enabled (thin or full) and CONFIG_KALLSYMS_SELFTEST is also enabled. I can reproduce in my local environment with the following error message with thin lto:

  [    1.877897] kallsyms_selftest: Test for 1750th symbol failed: (tsc_cs_mark_unstable) addr=ffffffff81038090
  [    1.877901] kallsyms_selftest: abort

It appears that commit 8cc32a9bbf29 ("kallsyms: strip LTO-only suffixes from promoted global functions") caused the failure. Commit 8cc32a9bbf29 changed cleanup_symbol_name() based on ".llvm." instead of '.' where ".llvm." is appended to a before-lto-optimization local symbol name. We need to propagate such knowledge in kallsyms_selftest.c as well.

Further more, compare_symbol_name() in kallsyms.c needs change as well. In scripts/kallsyms.c, kallsyms_names and kallsyms_seqs_of_names are used to record symbol names themselves and index to symbol names respectively. For example:
kallsyms_names:

    ...
    __amd_smn_rw._entry       <== seq 1000
    __amd_smn_rw._entry.5     <== seq 1001
    __amd_smn_rw.llvm.<hash>  <== seq 1002
    ...

kallsyms_seqs_of_names are sorted based on cleanup_symbol_name() through, so the order in kallsyms_seqs_of_names actually has

  index 1000:   seq 1002   <== __amd_smn_rw.llvm.<hash> (actual symbol comparison using '__amd_smn_rw')
  index 1001:   seq 1000   <== __amd_smn_rw._entry
  index 1002:   seq 1001   <== __amd_smn_rw._entry.5

Let us say at a particular point, at index 1000, symbol '__amd_smn_rw.llvm.<hash>' is comparing to '__amd_smn_rw._entry' where '__amd_smn_rw._entry' is the one to search e.g., with function kallsyms_on_each_match_symbol(). The current implementation will find out '__amd_smn_rw._entry' is less than '__amd_smn_rw.llvm.<hash>' and then continue to search e.g., index 999 and never found a match although the actual index 1001 is a match.

To fix this issue, let us do cleanup_symbol_name() first and then do comparison. In the above case, comparing '__amd_smn_rw' vs '__amd_smn_rw._entry' and '__amd_smn_rw._entry' being greater than '__amd_smn_rw', the next comparison will be > index 1000 and eventually index 1001 will be hit an a match is found.

For any symbols not having '.llvm.' substr, there is no functionality change for compare_symbol_name().

---
 kernel/kallsyms.c          |   17 +++++++----------
 kernel/kallsyms_selftest.c |   23 +----------------------
 2 files changed, 8 insertions(+), 32 deletions(-)

@@ -188,16 +188,13 @@ static bool cleanup_symbol_name(char *s)
 
 static int compare_symbol_name(const char *name, char *namebuf)
 {
-	int ret;
-
-	ret = strcmp(name, namebuf);
-	if (!ret)
-		return ret;
-
-	if (cleanup_symbol_name(namebuf) && !strcmp(name, namebuf))
-		return 0;
-
-	return ret;
+	/* The kallsyms_seqs_of_names is sorted based on names after
+	 * cleanup_symbol_name() (see scripts/kallsyms.c) if clang lto is enabled.
+	 * To ensure correct bisection in kallsyms_lookup_names(), do
+	 * cleanup_symbol_name(namebuf) before comparing name and namebuf.
+	 */
+	cleanup_symbol_name(namebuf);
+	return strcmp(name, namebuf);
 }
 
 static unsigned int get_symbol_seq(int index)

@@ -196,7 +196,7 @@ static bool match_cleanup_name(const cha
 	if (!IS_ENABLED(CONFIG_LTO_CLANG))
 		return false;
 
-	p = strchr(s, '.');
+	p = strstr(s, ".llvm.");
 	if (!p)
 		return false;
 

@@ -344,27 +344,6 @@ static int test_kallsyms_basic_function(
 			goto failed;
 		}
 
-		/*
-		 * The first '.' may be the initial letter, in which case the
-		 * entire symbol name will be truncated to an empty string in
-		 * cleanup_symbol_name(). Do not test these symbols.
-		 *
-		 * For example:
-		 * cat /proc/kallsyms | awk '{print $3}' | grep -E "^\." | head
-		 * .E_read_words
-		 * .E_leading_bytes
-		 * .E_trailing_bytes
-		 * .E_write_words
-		 * .E_copy
-		 * .str.292.llvm.12122243386960820698
-		 * .str.24.llvm.12122243386960820698
-		 * .str.29.llvm.12122243386960820698
-		 * .str.75.llvm.12122243386960820698
-		 * .str.99.llvm.12122243386960820698
-		 */
-		if (IS_ENABLED(CONFIG_LTO_CLANG) && !namebuf[0])
-			continue;
-
 		lookup_addr = kallsyms_lookup_name(namebuf);
 
 		memset(stat, 0, sizeof(*stat));

6.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mario Limonciello <[email protected]>

commit 5f641174a12b8a876a4101201a21ef4675ecc014 upstream.

The nocrt module parameter has no code associated with it and does nothing. As crt=-1 has same functionality as what nocrt should be doing drop nocrt and associated documentation.

This should fix a quirk for Gigabyte GA-7ZX that used nocrt and thus didn't function properly.

---
 Documentation/admin-guide/kernel-parameters.txt |    4 ----
 drivers/acpi/thermal.c                          |    6 +-----
 2 files changed, 1 insertion(+), 9 deletions(-)

@@ -6240,10 +6240,6 @@
 			-1: disable all critical trip points in all thermal zones
 			<degrees C>: override all critical trip points
 
-	thermal.nocrt=	[HW,ACPI]
-			Set to disable actions on ACPI thermal zone
-			critical and hot trip points.
-
 	thermal.off=	[HW,ACPI]
 			1: disable ACPI thermal control
 

@@ -59,10 +59,6 @@ static int tzp;
 module_param(tzp, int, 0444);
 MODULE_PARM_DESC(tzp, "Thermal zone polling frequency, in 1/10 seconds.");
 
-static int nocrt;
-module_param(nocrt, int, 0);
-MODULE_PARM_DESC(nocrt, "Set to take no action upon ACPI thermal zone critical trips points.");
-
 static int off;
 module_param(off, int, 0);
 MODULE_PARM_DESC(off, "Set to disable ACPI thermal support.");

@@ -1143,7 +1139,7 @@ static int thermal_act(const struct dmi_
 static int thermal_nocrt(const struct dmi_system_id *d) {
 	pr_notice("%s detected: disabling all critical thermal trip point actions.\n",
 		  d->ident);
-	nocrt = 1;
+	crt = -1;
 	return 0;
 }
 static int thermal_tzp(const struct dmi_system_id *d) {

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on BMIPS_GENERIC:

Florian

Hello,

This rc kernel passes DAMON functionality test[1] on my test machine. Attaching the test results summary below. Please note that I retrieved the kernel from linux-stable-rc tree[2].

[1] https://github.com/awslabs/damon-tests/tree/next/corr
[2] 499afdc4a899 ("Linux 6.4.14-rc1")

Thanks,
SJ

[...]

---

[32m
ok 1 selftests: damon: debugfs_attrs.sh
ok 2 selftests: damon: debugfs_schemes.sh
ok 3 selftests: damon: debugfs_target_ids.sh
ok 4 selftests: damon: debugfs_empty_targets.sh
ok 5 selftests: damon: debugfs_huge_count_read_write.sh
ok 6 selftests: damon: debugfs_duplicate_context_creation.sh
ok 7 selftests: damon: debugfs_rm_non_contexts.sh
ok 8 selftests: damon: sysfs.sh
ok 9 selftests: damon: sysfs_update_removed_scheme_dir.sh
ok 10 selftests: damon: reclaim.sh
ok 11 selftests: damon: lru_sort.sh
ok 1 selftests: damon-tests: kunit.sh
ok 2 selftests: damon-tests: huge_count_read_write.sh
ok 3 selftests: damon-tests: buffer_overflow.sh
ok 4 selftests: damon-tests: rm_contexts.sh
ok 5 selftests: damon-tests: record_null_deref.sh
ok 6 selftests: damon-tests: dbgfs_target_ids_read_before_terminate_race.sh ok 7 selftests: damon-tests: dbgfs_target_ids_pid_leak.sh
ok 8 selftests: damon-tests: damo_tests.sh
ok 9 selftests: damon-tests: masim-record.sh
ok 10 selftests: damon-tests: build_i386.sh
ok 11 selftests: damon-tests: build_m68k.sh
ok 12 selftests: damon-tests: build_arm64.sh
ok 13 selftests: damon-tests: build_i386_idle_flag.sh
ok 14 selftests: damon-tests: build_i386_highpte.sh
ok 15 selftests: damon-tests: build_nomemcg.sh
[33m
[92mPASS [39m
_remote_run_corr.sh SUCCESS

Built and booted successfully on RISC-V RV64 (HiFive Unmatched).

Successfully compiled and installed bindeb-pkgs on my computer (Acer Aspire E15, Intel Core i3 Haswell). No noticeable regressions.

An old man doll... just what I always wanted! - Clara

Hi Greg,

Build test (gcc version 12.3.1 20230829):
mips: 52 configs -> no failure
arm: 70 configs -> no failure
arm64: 3 configs -> no failure
x86_64: 4 configs -> no failure
alpha allmodconfig -> no failure
csky allmodconfig -> no failure
powerpc allmodconfig -> no failure
riscv allmodconfig -> no failure
s390 allmodconfig -> no failure
xtensa allmodconfig -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]
arm64: Booted on rpi4b (4GB model). No regression. [2]
mips: Booted on ci20 board. No regression. [3]

[1]. https://openqa.qa.codethink.co.uk/tests/4891
[2]. https://openqa.qa.codethink.co.uk/tests/4895
[3]. https://openqa.qa.codethink.co.uk/tests/4894

Regards
Sudip

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

NOTE:
Build warnings noticed from the previous round stabel rc review of selftests builds.

selftest/mm/hmm-tests

hmm-tests.c: In function 'hmm_dmirror_cmd':
hmm-tests.c:187:20: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
187 | cmd.addr = (__u64)buffer->ptr;
| ^
hmm-tests.c:188:19: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
188 | cmd.ptr = (__u64)buffer->mirror;
| ^

gcc-13-lkftconfig-kselftest-warnings
- https://storage.tuxsuite.com/public/linaro/lkft/builds/2UkQQWqmFIIBO5L1wqgonbqSDS0/

## Build
* kernel: 6.4.14-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-6.4.y
* git commit: 499afdc4a89911a65f5710838c78fbc857919b7e
* git describe: v6.4.13-10-g499afdc4a899
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.4.y/build/v6.4.13-10-g499afdc4a899

## Test Regressions (compared to v6.4.13)

## Metric Regressions (compared to v6.4.13)

## Test Fixes (compared to v6.4.13)

## Metric Fixes (compared to v6.4.13)

## Test result summary
total: 138855, pass: 120145, fail: 1908, skip: 16631, xfail: 171

## Build Summary
* arc: 5 total, 5 passed, 0 failed
* arm: 140 total, 138 passed, 2 failed
* arm64: 52 total, 49 passed, 3 failed
* i386: 39 total, 33 passed, 6 failed
* mips: 29 total, 27 passed, 2 failed
* parisc: 4 total, 4 passed, 0 failed
* powerpc: 36 total, 34 passed, 2 failed
* riscv: 24 total, 21 passed, 3 failed
* s390: 16 total, 14 passed, 2 failed
* sh: 14 total, 12 passed, 2 failed
* sparc: 8 total, 8 passed, 0 failed
* x86_64: 45 total, 40 passed, 5 failed

## Test suites summary
* boot
* kselftest-android
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers-dma-buf
* kselftest-efivarfs
* kselftest-exec
* kselftest-filesystems
* kselftest-filesystems-binderfs
* kselftest-filesystems-epoll
* kselftest-firmware
* kselftest-fpu
* kselftest-ftrace
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-net-forwarding
* kselftest-net-mptcp
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-user_events
* kselftest-vDSO
* kselftest-vm
* kselftest-watchdog
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* network-basic-tests
* perf
* rcutorture
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

Tested rc1 against the Fedora build system (aarch64, ppc64le, s390x, x86_64), and boot tested x86_64. No regressions noted.

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

All tests passing for Tegra ...

Test results for stable-v6.4:

    11 builds:	11 pass, 0 fail
    28 boots:	28 pass, 0 fail
    130 tests:	130 pass, 0 fail

Linux version: 6.4.14-rc1-g499afdc4a899
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,

                tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                tegra20-ventana, tegra210-p2371-2180,
                tegra210-p3450-0000, tegra30-cardhu-a04

Jon

Build results:

	total: 157 pass: 157 fail: 0
Qemu test results:
	total: 522 pass: 522 fail: 0

Guenter