gpio: sim: don't fiddle with GPIOLIB private members
Quoted 20 lines · Bartosz Golaszewski
Quoted 17 lines · Andy Shevchenko
Quoted 15 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
We access internals of struct
gpio_deviceand structgpio_descbecause it's easier but it can actually be avoided and we're working towards a better encapsulation of GPIO data structures across the kernel so let's start at home.Instead of checking
gpio_descflags, let's just track the requests of GPIOs in the driver. We also already store the information about direction of simulated lines.For kobjects needed by sysfs callbacks: we can iterate over the children devices of the top-level platform device and compare their fwnodes against the one passed to the init function from probe.
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
While at it: fix one line break and remove the untrue part about configfs callbacks using
dev_get_drvdata()from a comment.(Just wondering if you used --patience)
I may have forgotten this one time. I need to add an alias.
Ah, I can do "git config --global diff.algorithm patience". Will use it from now.
Bart
Quoted 9 lines
Bart
Quoted 7 lines
Reviewed-by Andy Shevchenko <[email protected]>--
With Best Regards,
Andy Shevchenko
PATCH v5 1/1 gpio: sim: don't fiddle with GPIOLIB private members
From: Bartosz Golaszewski <[email protected]>
We access internals of struct gpio_device and struct gpio_desc because it's easier but it can actually be avoided and we're working towards a better encapsulation of GPIO data structures across the kernel so let's start at home.
Instead of checking gpio_desc flags, let's just track the requests of GPIOs in the driver. We also already store the information about direction of simulated lines.
For kobjects needed by sysfs callbacks: we can iterate over the children devices of the top-level platform device and compare their fwnodes against the one passed to the init function from probe.
While at it: fix one line break and remove the untrue part about configfs callbacks using dev_get_drvdata() from a comment.
---
v1 -> v2:
- use get_dev_from_fwnode() instead of dereferencing fwnode directly
v2 -> v3:
- don't use fwnode internal fields, instead: iterate over the platform device's children and locate the GPIO device
v3 -> v4:
- use device_find_child() (not bus_device_find_by_fwnode() as it's pointless to iterate over all platform devices)
- use device_match_fwnode() for matching the device by fwnode
v4 -> v5:
- don't include linux/device/bus.h, rely on device.h already pulling it
- drop a comment about pointer mismatch for the callback function pointer in device_find_child
drivers/gpio/gpio-sim.c | 70 ++++++++++++++++++++++++++++++----------- 1 file changed, 51 insertions(+), 19 deletions(-)
drivers/gpio/gpio-sim.c +51 -19
@@ -12,6 +12,7 @@#include <linux/completion.h> #include <linux/configfs.h> #include <linux/device.h> +#include <linux/gpio/consumer.h> #include <linux/gpio/driver.h> #include <linux/gpio/machine.h> #include <linux/idr.h>
@@ -30,8 +31,6 @@#include <linux/string_helpers.h> #include <linux/sysfs.h> -#include "gpiolib.h" -#define GPIO_SIM_NGPIO_MAX 1024#define GPIO_SIM_PROP_MAX 4/* Max 3 properties + sentinel. */ #define GPIO_SIM_NUM_ATTRS 3/* value, pull and sentinel */
@@ -40,6 +39,8 @@ static DEFINE_IDA(gpio_sim_ida);struct gpio_sim_chip {struct gpio_chip gc; +struct device *dev; +unsigned long *request_map;unsigned long *direction_map;unsigned long *value_map;unsigned long *pull_map;
@@ -63,16 +64,11 @@ static int gpio_sim_apply_pull(struct gpio_sim_chip *chip, unsigned int offset, int value) { int irq, irq_type, ret; -struct gpio_desc *desc; -struct gpio_chip *gc; - - gc = &chip->gc; - desc = &gc->gpiodev->descs[offset];guard (mutex)(&chip->lock); -if (test_bit (FLAG_REQUESTED , &desc->flags) && - !test_bit (FLAG_IS_OUT , &desc->flags)) { +if (test_bit (offset, chip->request_map) && +test_bit (offset, chip->direction_map)) {if (value == !!test_bit (offset, chip->value_map)) goto set_pull;
@@ -99,8 +95,8 @@ static int gpio_sim_apply_pull(struct gpio_sim_chip *chip, set_value:/* Change the value unless we're actively driving the line. */ -if (!test_bit (FLAG_REQUESTED , &desc->flags) || - !test_bit (FLAG_IS_OUT , &desc->flags)) +if (!test_bit (offset, chip->request_map) || +test_bit (offset, chip->direction_map))__assign_bit (offset, chip->value_map, value); set_pull:
@@ -180,8 +176,8 @@ static int gpio_sim_get_direction(struct gpio_chip *gc, unsigned int offset)return direction ?GPIO_LINE_DIRECTION_IN :GPIO_LINE_DIRECTION_OUT ; } -static int gpio_sim_set_config (struct gpio_chip *gc, -unsigned int offset,unsigned long config) +static int gpio_sim_set_config (struct gpio_chip *gc,unsigned int offset, +unsigned long config) {struct gpio_sim_chip *chip =gpiochip_get_data (gc);
@@ -204,13 +200,25 @@ static int gpio_sim_to_irq(struct gpio_chip *gc, unsigned int offset)return irq_create_mapping (chip->irq_sim, offset); } -static void gpio_sim_free (struct gpio_chip *gc,unsigned int offset) +static int gpio_sim_request (struct gpio_chip *gc,unsigned int offset) {struct gpio_sim_chip *chip =gpiochip_get_data (gc); scoped_guard(mutex, &chip->lock) +__set_bit (offset, chip->request_map); + +return 0 ; +} + +static void gpio_sim_free (struct gpio_chip *gc,unsigned int offset) +{ +struct gpio_sim_chip *chip =gpiochip_get_data (gc); + + scoped_guard(mutex, &chip->lock) {__assign_bit (offset, chip->value_map, !!test_bit (offset, chip->pull_map)); +__clear_bit (offset, chip->request_map); + } } static ssize_t gpio_sim_sysfs_val_show(struct device *dev,
@@ -282,6 +290,13 @@ static void gpio_sim_mutex_destroy(void *data)mutex_destroy (lock); } +static void gpio_sim_put_device (void *data) +{ +struct device *dev = data; + +put_device (dev); +} +static void gpio_sim_dispose_mappings (void *data) {struct gpio_sim_chip *chip = data;
@@ -295,7 +310,7 @@ static void gpio_sim_sysfs_remove(void *data) {struct gpio_sim_chip *chip = data; -sysfs_remove_groups (&chip->gc.gpiodev->dev.kobj, chip->attr_groups); +sysfs_remove_groups (&chip->dev->kobj, chip->attr_groups); }static int gpio_sim_setup_sysfs (struct gpio_sim_chip *chip)
@@ -352,14 +367,18 @@ static int gpio_sim_setup_sysfs(struct gpio_sim_chip *chip) chip->attr_groups[i] = attr_group; } - ret =sysfs_create_groups (&chip->gc.gpiodev->dev.kobj, - chip->attr_groups); + ret =sysfs_create_groups (&chip->dev->kobj, chip->attr_groups);if (ret)return ret;return devm_add_action_or_reset (dev, gpio_sim_sysfs_remove, chip); } +static int gpio_sim_dev_match_fwnode (struct device *dev,void *data) +{ +return device_match_fwnode (dev, data); +} +static int gpio_sim_add_bank (struct fwnode_handle *swnode,struct device *dev) {struct gpio_sim_chip *chip;
@@ -387,6 +406,10 @@ static int gpio_sim_add_bank(struct fwnode_handle *swnode, struct device *dev)if (!chip)return -ENOMEM ; + chip->request_map =devm_bitmap_zalloc (dev, num_lines,GFP_KERNEL ); +if (!chip->request_map) +return -ENOMEM ; + chip->direction_map =devm_bitmap_alloc (dev, num_lines,GFP_KERNEL );if (!chip->direction_map)return -ENOMEM ;
@@ -432,6 +455,7 @@ static int gpio_sim_add_bank(struct fwnode_handle *swnode, struct device *dev) gc->get_direction = gpio_sim_get_direction; gc->set_config = gpio_sim_set_config; gc->to_irq = gpio_sim_to_irq; + gc->request = gpio_sim_request; gc->free = gpio_sim_free; gc->can_sleep = true;
@@ -439,8 +463,16 @@ static int gpio_sim_add_bank(struct fwnode_handle *swnode, struct device *dev)if (ret)return ret; -/* Used by sysfs and configfs callbacks. */ -dev_set_drvdata (&gc->gpiodev->dev, chip); + chip->dev =device_find_child (dev, swnode, gpio_sim_dev_match_fwnode); +if (!chip->dev) +return -ENODEV ; + + ret =devm_add_action_or_reset (dev, gpio_sim_put_device, chip->dev); +if (ret) +return ret; + +/* Used by sysfs callbacks. */ +dev_set_drvdata (chip->dev, chip);return gpio_sim_setup_sysfs (chip); }
Signature · 1 line
2.39.2
Quoted 13 lines · Andy Shevchenko
Quoted 11 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
We access internals of struct
gpio_deviceand structgpio_descbecause it's easier but it can actually be avoided and we're working towards a better encapsulation of GPIO data structures across the kernel so let's start at home.Instead of checking
gpio_descflags, let's just track the requests of GPIOs in the driver. We also already store the information about direction of simulated lines.
Quoted 9 lines
Quoted 6 lines
For kobjects needed by sysfs callbacks: we can iterate over the children devices of the top-level platform device and compare their fwnodes against the one passed to the init function from probe.
While at it: fix one line break and remove the untrue part about configfs callbacks using
dev_get_drvdata()from a comment.(Just wondering if you used --patience)
I may have forgotten this one time. I need to add an alias.
Bart
Quoted 7 lines
Reviewed-by Andy Shevchenko <[email protected]>--
With Best Regards,
Andy Shevchenko
Quoted 11 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
We access internals of struct
gpio_deviceand structgpio_descbecause it's easier but it can actually be avoided and we're working towards a better encapsulation of GPIO data structures across the kernel so let's start at home.Instead of checking
gpio_descflags, let's just track the requests of GPIOs in the driver. We also already store the information about direction of simulated lines.
Quoted 6 lines
For kobjects needed by sysfs callbacks: we can iterate over the children devices of the top-level platform device and compare their fwnodes against the one passed to the init function from probe.
While at it: fix one line break and remove the untrue part about configfs callbacks using
dev_get_drvdata()from a comment.
(Just wondering if you used --patience)
Signature · 2 lines
With Best Regards, Andy Shevchenko
Quoted 16 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
We access internals of struct
gpio_deviceand structgpio_descbecause it's easier but it can actually be avoided and we're working towards a better encapsulation of GPIO data structures across the kernel so let's start at home.Instead of checking
gpio_descflags, let's just track the requests of GPIOs in the driver. We also already store the information about direction of simulated lines.For kobjects needed by sysfs callbacks: we can iterate over the children devices of the top-level platform device and compare their fwnodes against the one passed to the init function from probe.
Quoted 5 lines
While at it: fix one line break and remove the untrue part about configfs callbacks using
dev_get_drvdata()from a comment.Signed-off-by Bartosz Golaszewski <[email protected]>---
Patch applied.
Bart