Skip to contentSkip to conversation

kmsan: simplify kmsan_internal_memmove_metadata()

PATCH Applied Alexander Potapenko 2 participants 7 messages Sep 11, 2023

Subsystems (2)
lore
Share & tools
lore

Alexander Potapenko

author maintainer
#0 lore raw

PATCH v2 1/4 kmsan: simplify kmsan_internal_memmove_metadata()

kmsan_internal_memmove_metadata() is the function that implements copying metadata every time memcpy()/memmove() is called. Because shadow memory stores 1 byte per each byte of kernel memory, copying the shadow is trivial and can be done by a single memmove() call.
Origins, on the other hand, are stored as 4-byte values corresponding to every aligned 4 bytes of kernel memory. Therefore, if either the source or the destination of kmsan_internal_memmove_metadata() is unaligned, the number of origin slots corresponding to the source or destination may differ:

1) memcpy(0xffff888080a00000, 0xffff888080900000, 4) copies 1 origin slot into 1 origin slot:

src (0xffff888080900000): xxxx
src origins: o111
dst (0xffff888080a00000): xxxx
dst origins: o111

2) memcpy(0xffff888080a00001, 0xffff888080900000, 4) copies 1 origin slot into 2 origin slots:

src (0xffff888080900000): xxxx
src origins: o111
dst (0xffff888080a00000): .xxx x...
dst origins: o111 o111

3) memcpy(0xffff888080a00000, 0xffff888080900001, 4) copies 2 origin slots into 1 origin slot:

src (0xffff888080900000): .xxx x...
src origins: o111 o222
dst (0xffff888080a00000): xxxx
dst origins: o111
(or o222)

Previously, kmsan_internal_memmove_metadata() tried to solve this problem by copying min(src_slots, dst_slots) as is and cloning the missing slot on one of the ends, if needed.
This was error-prone even in the simple cases where 4 bytes were copied, and did not account for situations where the total number of nonzero origin slots could have increased by more than one after copying:

memcpy(0xffff888080a00000, 0xffff888080900002, 8)

src (0xffff888080900002): ..xx .... xx..
src origins: o111 0000 o222
dst (0xffff888080a00000): xx.. ..xx

                            o111 0000
                        (or 0000 o222)

The new implementation simply copies the shadow byte by byte, and updates the corresponding origin slot, if the shadow byte is nonzero. This approach can handle complex cases with mixed initialized and uninitialized bytes. Similarly to KMSAN inline instrumentation, latter writes to bytes sharing the same origin slots take precedence.

Fixes f80be4571b19 ("kmsan: add KMSAN runtime core")
---
 mm/kmsan/core.c | 127 ++++++++++++------------------------------------
 1 file changed, 31 insertions(+), 96 deletions(-)
mm/kmsan/core.c +31 -96
index 3adb4c1d3b193..c19f47af04241 100644
@@ -83,131 +83,66 @@ depot_stack_handle_t kmsan_save_stack_with_flags(gfp_t flags,
 /* Copy the metadata following the memmove() behavior. */
 void kmsan_internal_memmove_metadata(void *dst, void *src, size_t n)
 {
+	depot_stack_handle_t prev_old_origin = 0, prev_new_origin = 0;
+	int i, iter, step, src_off, dst_off, oiter_src, oiter_dst;
 	depot_stack_handle_t old_origin = 0, new_origin = 0;
-	int src_slots, dst_slots, i, iter, step, skip_bits;
 	depot_stack_handle_t *origin_src, *origin_dst;
-	void *shadow_src, *shadow_dst;
-	u32 *align_shadow_src, shadow;
+	u8 *shadow_src, *shadow_dst;
+	u32 *align_shadow_dst;
 	bool backwards;
 
 	shadow_dst = kmsan_get_metadata(dst, KMSAN_META_SHADOW);
 	if (!shadow_dst)
 		return;
 	KMSAN_WARN_ON(!kmsan_metadata_is_contiguous(dst, n));
+	align_shadow_dst =
+		(u32 *)ALIGN_DOWN((u64)shadow_dst, KMSAN_ORIGIN_SIZE);
 
 	shadow_src = kmsan_get_metadata(src, KMSAN_META_SHADOW);
 	if (!shadow_src) {
-		/*
-		 * @src is untracked: zero out destination shadow, ignore the
-		 * origins, we're done.
-		 */
-		__memset(shadow_dst, 0, n);
+		/* @src is untracked: mark @dst as initialized. */
+		kmsan_internal_unpoison_memory(dst, n, /*checked*/ false);
 		return;
 	}
 	KMSAN_WARN_ON(!kmsan_metadata_is_contiguous(src, n));
 
-	__memmove(shadow_dst, shadow_src, n);
-
 	origin_dst = kmsan_get_metadata(dst, KMSAN_META_ORIGIN);
 	origin_src = kmsan_get_metadata(src, KMSAN_META_ORIGIN);
 	KMSAN_WARN_ON(!origin_dst || !origin_src);
-	src_slots = (ALIGN((u64)src + n, KMSAN_ORIGIN_SIZE) -
-		     ALIGN_DOWN((u64)src, KMSAN_ORIGIN_SIZE)) /
-		    KMSAN_ORIGIN_SIZE;
-	dst_slots = (ALIGN((u64)dst + n, KMSAN_ORIGIN_SIZE) -
-		     ALIGN_DOWN((u64)dst, KMSAN_ORIGIN_SIZE)) /
-		    KMSAN_ORIGIN_SIZE;
-	KMSAN_WARN_ON((src_slots < 1) || (dst_slots < 1));
-	KMSAN_WARN_ON((src_slots - dst_slots > 1) ||
-		      (dst_slots - src_slots < -1));
 
 	backwards = dst > src;
-	i = backwards ? min(src_slots, dst_slots) - 1 : 0;
-	iter = backwards ? -1 : 1;
-
-	align_shadow_src =
-		(u32 *)ALIGN_DOWN((u64)shadow_src, KMSAN_ORIGIN_SIZE);
-	for (step = 0; step < min(src_slots, dst_slots); step++, i += iter) {
-		KMSAN_WARN_ON(i < 0);
-		shadow = align_shadow_src[i];
-		if (i == 0) {
-			/*
-			 * If @src isn't aligned on KMSAN_ORIGIN_SIZE, don't
-			 * look at the first @src % KMSAN_ORIGIN_SIZE bytes
-			 * of the first shadow slot.
-			 */
-			skip_bits = ((u64)src % KMSAN_ORIGIN_SIZE) * 8;
-			shadow = (shadow >> skip_bits) << skip_bits;
+	step = backwards ? -1 : 1;
+	iter = backwards ? n - 1 : 0;
+	src_off = (u64)src % KMSAN_ORIGIN_SIZE;
+	dst_off = (u64)dst % KMSAN_ORIGIN_SIZE;
+
+	/* Copy shadow bytes one by one, updating the origins if necessary. */
+	for (i = 0; i < n; i++, iter += step) {
+		oiter_src = (iter + src_off) / KMSAN_ORIGIN_SIZE;
+		oiter_dst = (iter + dst_off) / KMSAN_ORIGIN_SIZE;
+		if (!shadow_src[iter]) {
+			shadow_dst[iter] = 0;
+			if (!align_shadow_dst[oiter_dst])
+				origin_dst[oiter_dst] = 0;
+			continue;
 		}
-		if (i == src_slots - 1) {
-			/*
-			 * If @src + n isn't aligned on
-			 * KMSAN_ORIGIN_SIZE, don't look at the last
-			 * (@src + n) % KMSAN_ORIGIN_SIZE bytes of the
-			 * last shadow slot.
-			 */
-			skip_bits = (((u64)src + n) % KMSAN_ORIGIN_SIZE) * 8;
-			shadow = (shadow << skip_bits) >> skip_bits;
-		}
-		/*
-		 * Overwrite the origin only if the corresponding
-		 * shadow is nonempty.
-		 */
-		if (origin_src[i] && (origin_src[i] != old_origin) && shadow) {
-			old_origin = origin_src[i];
-			new_origin = kmsan_internal_chain_origin(old_origin);
+		shadow_dst[iter] = shadow_src[iter];
+		old_origin = origin_src[oiter_src];
+		if (old_origin == prev_old_origin)
+			new_origin = prev_new_origin;
+		else {
 			/*
 			 * kmsan_internal_chain_origin() may return
 			 * NULL, but we don't want to lose the previous
 			 * origin value.
 			 */
+			new_origin = kmsan_internal_chain_origin(old_origin);
 			if (!new_origin)
 				new_origin = old_origin;
 		}
-		if (shadow)
-			origin_dst[i] = new_origin;
-		else
-			origin_dst[i] = 0;
-	}
-	/*
-	 * If dst_slots is greater than src_slots (i.e.
-	 * dst_slots == src_slots + 1), there is an extra origin slot at the
-	 * beginning or end of the destination buffer, for which we take the
-	 * origin from the previous slot.
-	 * This is only done if the part of the source shadow corresponding to
-	 * slot is non-zero.
-	 *
-	 * E.g. if we copy 8 aligned bytes that are marked as uninitialized
-	 * and have origins o111 and o222, to an unaligned buffer with offset 1,
-	 * these two origins are copied to three origin slots, so one of then
-	 * needs to be duplicated, depending on the copy direction (@backwards)
-	 *
-	 *   src shadow: |uuuu|uuuu|....|
-	 *   src origin: |o111|o222|....|
-	 *
-	 * backwards = 0:
-	 *   dst shadow: |.uuu|uuuu|u...|
-	 *   dst origin: |....|o111|o222| - fill the empty slot with o111
-	 * backwards = 1:
-	 *   dst shadow: |.uuu|uuuu|u...|
-	 *   dst origin: |o111|o222|....| - fill the empty slot with o222
-	 */
-	if (src_slots < dst_slots) {
-		if (backwards) {
-			shadow = align_shadow_src[src_slots - 1];
-			skip_bits = (((u64)dst + n) % KMSAN_ORIGIN_SIZE) * 8;
-			shadow = (shadow << skip_bits) >> skip_bits;
-			if (shadow)
-				/* src_slots > 0, therefore dst_slots is at least 2 */
-				origin_dst[dst_slots - 1] =
-					origin_dst[dst_slots - 2];
-		} else {
-			shadow = align_shadow_src[0];
-			skip_bits = ((u64)dst % KMSAN_ORIGIN_SIZE) * 8;
-			shadow = (shadow >> skip_bits) << skip_bits;
-			if (shadow)
-				origin_dst[0] = origin_dst[1];
-		}
+		origin_dst[oiter_dst] = new_origin;
+		prev_new_origin = new_origin;
+		prev_old_origin = old_origin;
 	}
 }
 
Signature · 1 line
2.42.0.283.g2d96d420d3-goog
author maintainer
#1 lore raw

PATCH v2 2/4 kmsan: prevent optimizations in memcpy tests

Clang 18 learned to optimize away memcpy() calls of small uninitialized scalar values. To ensure that memcpy tests in kmsan_test.c still perform calls to memcpy() (which KMSAN replaces with __msan_memcpy()), declare a separate memcpy_noinline() function with volatile parameters, which won't be optimized.

Also retire DO_NOT_OPTIMIZE(), as memcpy_noinline() is apparently enough.

---
v2:
- fix W=1 warnings reported by LKP test robot

---
 mm/kmsan/kmsan_test.c | 41 ++++++++++++++++-------------------------
 1 file changed, 16 insertions(+), 25 deletions(-)
mm/kmsan/kmsan_test.c +16 -25
index 312989aa2865c..a8d4ca4a1066d 100644
@@ -407,33 +407,25 @@ static void test_printk(struct kunit *test)
 	KUNIT_EXPECT_TRUE(test, report_matches(&expect));
 }
 
-/*
- * Prevent the compiler from optimizing @var away. Without this, Clang may
- * notice that @var is uninitialized and drop memcpy() calls that use it.
- *
- * There is OPTIMIZER_HIDE_VAR() in linux/compier.h that we cannot use here,
- * because it is implemented as inline assembly receiving @var as a parameter
- * and will enforce a KMSAN check. Same is true for e.g. barrier_data(var).
- */
-#define DO_NOT_OPTIMIZE(var) barrier()
+/* Prevent the compiler from inlining a memcpy() call. */
+static noinline void *memcpy_noinline(volatile void *dst,
+				      const volatile void *src, size_t size)
+{
+	return memcpy((void *)dst, (const void *)src, size);
+}
 
-/*
- * Test case: ensure that memcpy() correctly copies initialized values.
- * Also serves as a regression test to ensure DO_NOT_OPTIMIZE() does not cause
- * extra checks.
- */
+/* Test case: ensure that memcpy() correctly copies initialized values. */
 static void test_init_memcpy(struct kunit *test)
 {
 	EXPECTATION_NO_REPORT(expect);
-	volatile int src;
-	volatile int dst = 0;
+	volatile long long src;
+	volatile long long dst = 0;
 
-	DO_NOT_OPTIMIZE(src);
 	src = 1;
 	kunit_info(
 		test,
 		"memcpy()ing aligned initialized src to aligned dst (no reports)\n");
-	memcpy((void *)&dst, (void *)&src, sizeof(src));
+	memcpy_noinline((void *)&dst, (void *)&src, sizeof(src));
 	kmsan_check_memory((void *)&dst, sizeof(dst));
 	KUNIT_EXPECT_TRUE(test, report_matches(&expect));
 }
@@ -451,8 +443,7 @@ static void test_memcpy_aligned_to_aligned(struct kunit *test)
 	kunit_info(
 		test,
 		"memcpy()ing aligned uninit src to aligned dst (UMR report)\n");
-	DO_NOT_OPTIMIZE(uninit_src);
-	memcpy((void *)&dst, (void *)&uninit_src, sizeof(uninit_src));
+	memcpy_noinline((void *)&dst, (void *)&uninit_src, sizeof(uninit_src));
 	kmsan_check_memory((void *)&dst, sizeof(dst));
 	KUNIT_EXPECT_TRUE(test, report_matches(&expect));
 }
@@ -474,8 +465,9 @@ static void test_memcpy_aligned_to_unaligned(struct kunit *test)
 	kunit_info(
 		test,
 		"memcpy()ing aligned uninit src to unaligned dst (UMR report)\n");
-	DO_NOT_OPTIMIZE(uninit_src);
-	memcpy((void *)&dst[1], (void *)&uninit_src, sizeof(uninit_src));
+	kmsan_check_memory((void *)&uninit_src, sizeof(uninit_src));
+	memcpy_noinline((void *)&dst[1], (void *)&uninit_src,
+			sizeof(uninit_src));
 	kmsan_check_memory((void *)dst, 4);
 	KUNIT_EXPECT_TRUE(test, report_matches(&expect));
 }
@@ -498,8 +490,8 @@ static void test_memcpy_aligned_to_unaligned2(struct kunit *test)
 	kunit_info(
 		test,
 		"memcpy()ing aligned uninit src to unaligned dst - part 2 (UMR report)\n");
-	DO_NOT_OPTIMIZE(uninit_src);
-	memcpy((void *)&dst[1], (void *)&uninit_src, sizeof(uninit_src));
+	memcpy_noinline((void *)&dst[1], (void *)&uninit_src,
+			sizeof(uninit_src));
 	kmsan_check_memory((void *)&dst[4], sizeof(uninit_src));
 	KUNIT_EXPECT_TRUE(test, report_matches(&expect));
 }
@@ -513,7 +505,6 @@ static void test_memcpy_aligned_to_unaligned2(struct kunit *test)
                                                                             \
 		kunit_info(test,                                            \
 			   "memset" #size "() should initialize memory\n"); \
-		DO_NOT_OPTIMIZE(uninit);                                    \
 		memset##size((uint##size##_t *)&uninit, 0, 1);              \
 		kmsan_check_memory((void *)&uninit, sizeof(uninit));        \
 		KUNIT_EXPECT_TRUE(test, report_matches(&expect));           \
Signature · 1 line
2.42.0.283.g2d96d420d3-goog
reviewer Acked-by on v2 2/4
#2 lore raw

Re: [PATCH v2 2/4] kmsan: prevent optimizations in memcpy tests

Quoted 11 lines · Alexander Potapenko

Clang 18 learned to optimize away memcpy() calls of small uninitialized scalar values. To ensure that memcpy tests in kmsan_test.c still perform calls to memcpy() (which KMSAN replaces with __msan_memcpy()), declare a separate memcpy_noinline() function with volatile parameters, which won't be optimized.

Also retire DO_NOT_OPTIMIZE(), as memcpy_noinline() is apparently enough.

Quoted 99 lines

---
v2:
- fix W=1 warnings reported by LKP test robot

---
 mm/kmsan/kmsan_test.c | 41 ++++++++++++++++-------------------------
 1 file changed, 16 insertions(+), 25 deletions(-)
mm/kmsan/kmsan_test.c +16 -26
index 312989aa2865c..a8d4ca4a1066d 100644
@@ -407,33 +407,25 @@ static void test_printk(struct kunit *test)
        KUNIT_EXPECT_TRUE(test, report_matches(&expect));
 }
 
-/*
- * Prevent the compiler from optimizing @var away. Without this, Clang may
- * notice that @var is uninitialized and drop memcpy() calls that use it.
- *
- * There is OPTIMIZER_HIDE_VAR() in linux/compier.h that we cannot use here,
- * because it is implemented as inline assembly receiving @var as a parameter
- * and will enforce a KMSAN check. Same is true for e.g. barrier_data(var).
- */
-#define DO_NOT_OPTIMIZE(var) barrier()
+/* Prevent the compiler from inlining a memcpy() call. */
+static noinline void *memcpy_noinline(volatile void *dst,
+                                     const volatile void *src, size_t size)
+{
+       return memcpy((void *)dst, (const void *)src, size);
+}
 
-/*
- * Test case: ensure that memcpy() correctly copies initialized values.
- * Also serves as a regression test to ensure DO_NOT_OPTIMIZE() does not cause
- * extra checks.
- */
+/* Test case: ensure that memcpy() correctly copies initialized values. */
 static void test_init_memcpy(struct kunit *test)
 {
        EXPECTATION_NO_REPORT(expect);
-       volatile int src;
-       volatile int dst = 0;
+       volatile long long src;
+       volatile long long dst = 0;
 
-       DO_NOT_OPTIMIZE(src);
        src = 1;
        kunit_info(
                test,
                "memcpy()ing aligned initialized src to aligned dst (no reports)\n");
-       memcpy((void *)&dst, (void *)&src, sizeof(src));
+       memcpy_noinline((void *)&dst, (void *)&src, sizeof(src));
        kmsan_check_memory((void *)&dst, sizeof(dst));
        KUNIT_EXPECT_TRUE(test, report_matches(&expect));
 }
@@ -451,8 +443,7 @@ static void test_memcpy_aligned_to_aligned(struct kunit *test)
        kunit_info(
                test,
                "memcpy()ing aligned uninit src to aligned dst (UMR report)\n");
-       DO_NOT_OPTIMIZE(uninit_src);
-       memcpy((void *)&dst, (void *)&uninit_src, sizeof(uninit_src));
+       memcpy_noinline((void *)&dst, (void *)&uninit_src, sizeof(uninit_src));
        kmsan_check_memory((void *)&dst, sizeof(dst));
        KUNIT_EXPECT_TRUE(test, report_matches(&expect));
 }
@@ -474,8 +465,9 @@ static void test_memcpy_aligned_to_unaligned(struct kunit *test)
        kunit_info(
                test,
                "memcpy()ing aligned uninit src to unaligned dst (UMR report)\n");
-       DO_NOT_OPTIMIZE(uninit_src);
-       memcpy((void *)&dst[1], (void *)&uninit_src, sizeof(uninit_src));
+       kmsan_check_memory((void *)&uninit_src, sizeof(uninit_src));
+       memcpy_noinline((void *)&dst[1], (void *)&uninit_src,
+                       sizeof(uninit_src));
        kmsan_check_memory((void *)dst, 4);
        KUNIT_EXPECT_TRUE(test, report_matches(&expect));
 }
@@ -498,8 +490,8 @@ static void test_memcpy_aligned_to_unaligned2(struct kunit *test)
        kunit_info(
                test,
                "memcpy()ing aligned uninit src to unaligned dst - part 2 (UMR report)\n");
-       DO_NOT_OPTIMIZE(uninit_src);
-       memcpy((void *)&dst[1], (void *)&uninit_src, sizeof(uninit_src));
+       memcpy_noinline((void *)&dst[1], (void *)&uninit_src,
+                       sizeof(uninit_src));
        kmsan_check_memory((void *)&dst[4], sizeof(uninit_src));
        KUNIT_EXPECT_TRUE(test, report_matches(&expect));
 }
@@ -513,7 +505,6 @@ static void test_memcpy_aligned_to_unaligned2(struct kunit *test)
                                                                             \
                kunit_info(test,                                            \
                           "memset" #size "() should initialize memory\n"); \
-               DO_NOT_OPTIMIZE(uninit);                                    \
                memset##size((uint##size##_t *)&uninit, 0, 1);              \
                kmsan_check_memory((void *)&uninit, sizeof(uninit));        \
                KUNIT_EXPECT_TRUE(test, report_matches(&expect));           \
--

2.42.0.283.g2d96d420d3-goog

author maintainer
#3 lore raw

PATCH v2 3/4 kmsan: merge test_memcpy_aligned_to_unaligned{,2}() together

In reply to Alexander Potapenko

Introduce report_reset() that allows checking for more than one KMSAN report per testcase.
Fold test_memcpy_aligned_to_unaligned2() into test_memcpy_aligned_to_unaligned(), so that they share the setup phase and check the behavior of a single memcpy() call.

---
 mm/kmsan/kmsan_test.c | 37 +++++++++++++------------------------
 1 file changed, 13 insertions(+), 24 deletions(-)
mm/kmsan/kmsan_test.c +13 -24
index a8d4ca4a1066d..6eb1e1a4d08f9 100644
@@ -67,6 +67,17 @@ static bool report_available(void)
 	return READ_ONCE(observed.available);
 }
 
+/* Reset observed.available, so that the test can trigger another report. */
+static void report_reset(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&observed.lock, flags);
+	WRITE_ONCE(observed.available, false);
+	observed.ignore = false;
+	spin_unlock_irqrestore(&observed.lock, flags);
+}
+
 /* Information we expect in a report. */
 struct expect_report {
 	const char *error_type; /* Error type. */
@@ -454,7 +465,7 @@ static void test_memcpy_aligned_to_aligned(struct kunit *test)
  *
  * Copying aligned 4-byte value to an unaligned one leads to touching two
  * aligned 4-byte values. This test case checks that KMSAN correctly reports an
- * error on the first of the two values.
+ * error on the mentioned two values.
  */
 static void test_memcpy_aligned_to_unaligned(struct kunit *test)
 {
@@ -470,28 +481,7 @@ static void test_memcpy_aligned_to_unaligned(struct kunit *test)
 			sizeof(uninit_src));
 	kmsan_check_memory((void *)dst, 4);
 	KUNIT_EXPECT_TRUE(test, report_matches(&expect));
-}
-
-/*
- * Test case: ensure that memcpy() correctly copies uninitialized values between
- * aligned `src` and unaligned `dst`.
- *
- * Copying aligned 4-byte value to an unaligned one leads to touching two
- * aligned 4-byte values. This test case checks that KMSAN correctly reports an
- * error on the second of the two values.
- */
-static void test_memcpy_aligned_to_unaligned2(struct kunit *test)
-{
-	EXPECTATION_UNINIT_VALUE_FN(expect,
-				    "test_memcpy_aligned_to_unaligned2");
-	volatile int uninit_src;
-	volatile char dst[8] = { 0 };
-
-	kunit_info(
-		test,
-		"memcpy()ing aligned uninit src to unaligned dst - part 2 (UMR report)\n");
-	memcpy_noinline((void *)&dst[1], (void *)&uninit_src,
-			sizeof(uninit_src));
+	report_reset();
 	kmsan_check_memory((void *)&dst[4], sizeof(uninit_src));
 	KUNIT_EXPECT_TRUE(test, report_matches(&expect));
 }
@@ -589,7 +579,6 @@ static struct kunit_case kmsan_test_cases[] = {
 	KUNIT_CASE(test_init_memcpy),
 	KUNIT_CASE(test_memcpy_aligned_to_aligned),
 	KUNIT_CASE(test_memcpy_aligned_to_unaligned),
-	KUNIT_CASE(test_memcpy_aligned_to_unaligned2),
 	KUNIT_CASE(test_memset16),
 	KUNIT_CASE(test_memset32),
 	KUNIT_CASE(test_memset64),
Signature · 1 line
2.42.0.283.g2d96d420d3-goog
reviewer Acked-by on v2 3/4
#4 lore raw

Re: [PATCH v2 3/4] kmsan: merge test_memcpy_aligned_to_unaligned{,2}() together

Quoted 8 lines · Alexander Potapenko

Introduce report_reset() that allows checking for more than one KMSAN report per testcase.
Fold test_memcpy_aligned_to_unaligned2() into test_memcpy_aligned_to_unaligned(), so that they share the setup phase and check the behavior of a single memcpy() call.

Quoted 76 lines
---
 mm/kmsan/kmsan_test.c | 37 +++++++++++++------------------------
 1 file changed, 13 insertions(+), 24 deletions(-)
mm/kmsan/kmsan_test.c +13 -25
index a8d4ca4a1066d..6eb1e1a4d08f9 100644
@@ -67,6 +67,17 @@ static bool report_available(void)
        return READ_ONCE(observed.available);
 }
 
+/* Reset observed.available, so that the test can trigger another report. */
+static void report_reset(void)
+{
+       unsigned long flags;
+
+       spin_lock_irqsave(&observed.lock, flags);
+       WRITE_ONCE(observed.available, false);
+       observed.ignore = false;
+       spin_unlock_irqrestore(&observed.lock, flags);
+}
+
 /* Information we expect in a report. */
 struct expect_report {
        const char *error_type; /* Error type. */
@@ -454,7 +465,7 @@ static void test_memcpy_aligned_to_aligned(struct kunit *test)
  *
  * Copying aligned 4-byte value to an unaligned one leads to touching two
  * aligned 4-byte values. This test case checks that KMSAN correctly reports an
- * error on the first of the two values.
+ * error on the mentioned two values.
  */
 static void test_memcpy_aligned_to_unaligned(struct kunit *test)
 {
@@ -470,28 +481,7 @@ static void test_memcpy_aligned_to_unaligned(struct kunit *test)
                        sizeof(uninit_src));
        kmsan_check_memory((void *)dst, 4);
        KUNIT_EXPECT_TRUE(test, report_matches(&expect));
-}
-
-/*
- * Test case: ensure that memcpy() correctly copies uninitialized values between
- * aligned `src` and unaligned `dst`.
- *
- * Copying aligned 4-byte value to an unaligned one leads to touching two
- * aligned 4-byte values. This test case checks that KMSAN correctly reports an
- * error on the second of the two values.
- */
-static void test_memcpy_aligned_to_unaligned2(struct kunit *test)
-{
-       EXPECTATION_UNINIT_VALUE_FN(expect,
-                                   "test_memcpy_aligned_to_unaligned2");
-       volatile int uninit_src;
-       volatile char dst[8] = { 0 };
-
-       kunit_info(
-               test,
-               "memcpy()ing aligned uninit src to unaligned dst - part 2 (UMR report)\n");
-       memcpy_noinline((void *)&dst[1], (void *)&uninit_src,
-                       sizeof(uninit_src));
+       report_reset();
        kmsan_check_memory((void *)&dst[4], sizeof(uninit_src));
        KUNIT_EXPECT_TRUE(test, report_matches(&expect));
 }
@@ -589,7 +579,6 @@ static struct kunit_case kmsan_test_cases[] = {
        KUNIT_CASE(test_init_memcpy),
        KUNIT_CASE(test_memcpy_aligned_to_aligned),
        KUNIT_CASE(test_memcpy_aligned_to_unaligned),
-       KUNIT_CASE(test_memcpy_aligned_to_unaligned2),
        KUNIT_CASE(test_memset16),
        KUNIT_CASE(test_memset32),
        KUNIT_CASE(test_memset64),
--

2.42.0.283.g2d96d420d3-goog

author maintainer
#5 lore raw

PATCH v2 4/4 kmsan: introduce test_memcpy_initialized_gap()

In reply to Alexander Potapenko

Add a regression test for the special case where memcpy() previously failed to correctly set the origins: if upon memcpy() four aligned initialized bytes with a zero origin value ended up split between two aligned four-byte chunks, one of those chunks could've received the zero origin value even despite it contained uninitialized bytes from other writes.

---
 mm/kmsan/kmsan_test.c | 53 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)
mm/kmsan/kmsan_test.c +53 -0
index 6eb1e1a4d08f9..07d3a3a5a9c52 100644
@@ -486,6 +486,58 @@ static void test_memcpy_aligned_to_unaligned(struct kunit *test)
 	KUNIT_EXPECT_TRUE(test, report_matches(&expect));
 }
 
+/*
+ * Test case: ensure that origin slots do not accidentally get overwritten with
+ * zeroes during memcpy().
+ *
+ * Previously, when copying memory from an aligned buffer to an unaligned one,
+ * if there were zero origins corresponding to zero shadow values in the source
+ * buffer, they could have ended up being copied to nonzero shadow values in the
+ * destination buffer:
+ *
+ *  memcpy(0xffff888080a00000, 0xffff888080900002, 8)
+ *
+ *  src (0xffff888080900002): ..xx .... xx..
+ *  src origins:              o111 0000 o222
+ *  dst (0xffff888080a00000): xx.. ..xx
+ *  dst origins:              o111 0000
+ *                        (or 0000 o222)
+ *
+ * (here . stands for an initialized byte, and x for an uninitialized one.
+ *
+ * Ensure that this does not happen anymore, and for both destination bytes
+ * the origin is nonzero (i.e. KMSAN reports an error).
+ */
+static void test_memcpy_initialized_gap(struct kunit *test)
+{
+	EXPECTATION_UNINIT_VALUE_FN(expect, "test_memcpy_initialized_gap");
+	volatile char uninit_src[12];
+	volatile char dst[8] = { 0 };
+
+	kunit_info(
+		test,
+		"unaligned 4-byte initialized value gets a nonzero origin after memcpy() - (2 UMR reports)\n");
+
+	uninit_src[0] = 42;
+	uninit_src[1] = 42;
+	uninit_src[4] = 42;
+	uninit_src[5] = 42;
+	uninit_src[6] = 42;
+	uninit_src[7] = 42;
+	uninit_src[10] = 42;
+	uninit_src[11] = 42;
+	memcpy_noinline((void *)&dst[0], (void *)&uninit_src[2], 8);
+
+	kmsan_check_memory((void *)&dst[0], 4);
+	KUNIT_EXPECT_TRUE(test, report_matches(&expect));
+	report_reset();
+	kmsan_check_memory((void *)&dst[2], 4);
+	KUNIT_EXPECT_FALSE(test, report_matches(&expect));
+	report_reset();
+	kmsan_check_memory((void *)&dst[4], 4);
+	KUNIT_EXPECT_TRUE(test, report_matches(&expect));
+}
+
 /* Generate test cases for memset16(), memset32(), memset64(). */
 #define DEFINE_TEST_MEMSETXX(size)                                          \
 	static void test_memset##size(struct kunit *test)                   \
@@ -579,6 +631,7 @@ static struct kunit_case kmsan_test_cases[] = {
 	KUNIT_CASE(test_init_memcpy),
 	KUNIT_CASE(test_memcpy_aligned_to_aligned),
 	KUNIT_CASE(test_memcpy_aligned_to_unaligned),
+	KUNIT_CASE(test_memcpy_initialized_gap),
 	KUNIT_CASE(test_memset16),
 	KUNIT_CASE(test_memset32),
 	KUNIT_CASE(test_memset64),
Signature · 1 line
2.42.0.283.g2d96d420d3-goog
reviewer Acked-by on v2 4/4
#6 lore raw

Re: [PATCH v2 4/4] kmsan: introduce test_memcpy_initialized_gap()

Quoted 10 lines · Alexander Potapenko

Add a regression test for the special case where memcpy() previously failed to correctly set the origins: if upon memcpy() four aligned initialized bytes with a zero origin value ended up split between two aligned four-byte chunks, one of those chunks could've received the zero origin value even despite it contained uninitialized bytes from other writes.

Quoted 78 lines
---
 mm/kmsan/kmsan_test.c | 53 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)
mm/kmsan/kmsan_test.c +53 -1
index 6eb1e1a4d08f9..07d3a3a5a9c52 100644
@@ -486,6 +486,58 @@ static void test_memcpy_aligned_to_unaligned(struct kunit *test)
        KUNIT_EXPECT_TRUE(test, report_matches(&expect));
 }
 
+/*
+ * Test case: ensure that origin slots do not accidentally get overwritten with
+ * zeroes during memcpy().
+ *
+ * Previously, when copying memory from an aligned buffer to an unaligned one,
+ * if there were zero origins corresponding to zero shadow values in the source
+ * buffer, they could have ended up being copied to nonzero shadow values in the
+ * destination buffer:
+ *
+ *  memcpy(0xffff888080a00000, 0xffff888080900002, 8)
+ *
+ *  src (0xffff888080900002): ..xx .... xx..
+ *  src origins:              o111 0000 o222
+ *  dst (0xffff888080a00000): xx.. ..xx
+ *  dst origins:              o111 0000
+ *                        (or 0000 o222)
+ *
+ * (here . stands for an initialized byte, and x for an uninitialized one.
+ *
+ * Ensure that this does not happen anymore, and for both destination bytes
+ * the origin is nonzero (i.e. KMSAN reports an error).
+ */
+static void test_memcpy_initialized_gap(struct kunit *test)
+{
+       EXPECTATION_UNINIT_VALUE_FN(expect, "test_memcpy_initialized_gap");
+       volatile char uninit_src[12];
+       volatile char dst[8] = { 0 };
+
+       kunit_info(
+               test,
+               "unaligned 4-byte initialized value gets a nonzero origin after memcpy() - (2 UMR reports)\n");
+
+       uninit_src[0] = 42;
+       uninit_src[1] = 42;
+       uninit_src[4] = 42;
+       uninit_src[5] = 42;
+       uninit_src[6] = 42;
+       uninit_src[7] = 42;
+       uninit_src[10] = 42;
+       uninit_src[11] = 42;
+       memcpy_noinline((void *)&dst[0], (void *)&uninit_src[2], 8);
+
+       kmsan_check_memory((void *)&dst[0], 4);
+       KUNIT_EXPECT_TRUE(test, report_matches(&expect));
+       report_reset();
+       kmsan_check_memory((void *)&dst[2], 4);
+       KUNIT_EXPECT_FALSE(test, report_matches(&expect));
+       report_reset();
+       kmsan_check_memory((void *)&dst[4], 4);
+       KUNIT_EXPECT_TRUE(test, report_matches(&expect));
+}
+
 /* Generate test cases for memset16(), memset32(), memset64(). */
 #define DEFINE_TEST_MEMSETXX(size)                                          \
        static void test_memset##size(struct kunit *test)                   \
@@ -579,6 +631,7 @@ static struct kunit_case kmsan_test_cases[] = {
        KUNIT_CASE(test_init_memcpy),
        KUNIT_CASE(test_memcpy_aligned_to_aligned),
        KUNIT_CASE(test_memcpy_aligned_to_unaligned),
+       KUNIT_CASE(test_memcpy_initialized_gap),
        KUNIT_CASE(test_memset16),
        KUNIT_CASE(test_memset32),
        KUNIT_CASE(test_memset64),
--

2.42.0.283.g2d96d420d3-goog