Fix most severe problems with `rt-migrate.c`
cover Fix most severe problems with `rt-migrate.c`
This set of patches fixes the most severe problems with rt-migrate.c. I can do further improvements and refactorings if that is wanted.
Marius Kittler (2):
Ensure prio is within valid range in rt-migrate.c Prevent segmentation fault when negative task count specified
.../realtime/func/rt-migrate/rt-migrate.c | 25 +++++++++++++++---- 1 file changed, 20 insertions(+), 5 deletions(-)
Signature · 5 lines
2.42.0 -- Mailing list info: https://lists.linux.it/listinfo/ltp
PATCH 1/2 Ensure prio is within valid range in `rt-migrate.c`
* According to the documentation the value param->sched_priority must lie within the range given by sched_get_priority_min(2) and sched_get_priority_max(2). This change ensures that this is the case without completely restructuring the test yet.
* See https://github.com/linux-test-project/ltp/issues/812
--- .../realtime/func/rt-migrate/rt-migrate.c | 21 ++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-)
testcases/realtime/func/rt-migrate/rt-migrate.c +16 -5
@@ -74,6 +74,9 @@#define VERSION_STRING "V 0.4LTP" +#define CLAMP (x, lower, upper) (MIN(upper, MAX(x, lower))) +#define CLAMP_PRIO (prio) CLAMP(prio, prio_min, prio_max) +int nr_tasks;int lfd;
@@ -137,7 +140,7 @@ static unsigned long long interval = INTERVAL;static unsigned long long run_interval =RUN_INTERVAL ;static unsigned long long max_err =MAX_ERR ;static int nr_runs =NR_RUNS ; -static int prio_start =PRIO_START ; +static int prio_start =PRIO_START , prio_min, prio_max;static int check =1 ;static int stop;
@@ -284,8 +287,8 @@ static void print_results(void)printf ("Parent pid: %d\n" ,getpid ());for (t =0 ; t < nr_tasks; t++) { -printf (" Task %d (prio %d) (pid %ld):\n" , t, t + prio_start, - thread_pids[t]); +printf (" Task %d (prio %d) (pid %ld):\n" , t, +CLAMP_PRIO (t + prio_start), thread_pids[t]);printf (" Max: %lld us\n" , tasks_max[t]);printf (" Min: %lld us\n" , tasks_min[t]);printf (" Tot: %lld us\n" , tasks_avg[t] * nr_runs);
@@ -394,6 +397,13 @@ static void stop_log(int sig)int main (int argc,char **argv) { +/* +* Determine the valid priority range; subtracting one from the +* maximum to reserve the highest prio for main thread. +*/ + prio_min =sched_get_priority_min (SCHED_FIFO ); + prio_max =sched_get_priority_max (SCHED_FIFO ) -1 ; +int *threads;long i;int ret;
@@ -448,7 +458,7 @@ int main(int argc, char **argv)for (i =0 ; i < nr_tasks; i++) { threads[i] =create_fifo_thread (start_task, (void *)i, - prio_start + i); +CLAMP_PRIO (prio_start + i)); }/*
@@ -460,7 +470,8 @@ int main(int argc, char **argv)/* up our prio above all tasks */ memset (¶m,0 ,sizeof (param)); - param.sched_priority = nr_tasks + prio_start; + param.sched_priority =CLAMP (nr_tasks + prio_start, prio_min, + prio_max +1 );if (sched_setscheduler (0 ,SCHED_FIFO , ¶m))debug (DBG_WARN ,"Warning, can't set priority of main thread!\n" ); intv.tv_sec =INTERVAL /NS_PER_SEC ;
Signature · 5 lines
2.42.0 -- Mailing list info: https://lists.linux.it/listinfo/ltp
Re: [LTP] [PATCH v1 1/2] Ensure prio is within valid range in `rt-migrate.c`
Hi!
I generally suggest to refactor test into new API if a structural change is needed. Here we are in a grey zone, because the test is old enough to be refactored and patch isn't so big. Still, test is bugged and we need to fix _at least_ a small portion of it.
I would suggest to take a look at the code a bit closer and to guess how much effort we should put in order to rewrite it with new API. The test seems pretty simple, if we get rid of all the old stuff (options, stdout management) as we supposed to do anyway.
Regards,
Andrea
Quoted 78 lines · Marius Kittler
* According to the documentation the value
param->sched_prioritymust lie within the range given bysched_get_priority_min(2)andsched_get_priority_max(2). This change ensures that this is the case without completely restructuring the test yet.
* See https://github.com/linux-test-project/ltp/issues/812Signed-off-by Marius Kittler <[email protected]>--- .../realtime/func/rt-migrate/rt-migrate.c | 21 ++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-)testcases/realtime/func/rt-migrate/rt-migrate.c +16
-5@@ -74,6 +74,9 @@#define VERSION_STRING "V 0.4LTP" +#define CLAMP (x, lower, upper) (MIN(upper, MAX(x, lower))) +#define CLAMP_PRIO (prio) CLAMP(prio, prio_min, prio_max) +int nr_tasks;int lfd;@@ -137,7 +140,7 @@ static unsigned long long interval = INTERVAL;static unsigned long long run_interval =RUN_INTERVAL ;static unsigned long long max_err =MAX_ERR ;static int nr_runs =NR_RUNS ; -static int prio_start =PRIO_START ; +static int prio_start =PRIO_START , prio_min, prio_max;static int check =1 ;static int stop;@@ -284,8 +287,8 @@ static void print_results(void)printf ("Parent pid: %d\n" ,getpid ());for (t =0 ; t < nr_tasks; t++) { -printf (" Task %d (prio %d) (pid %ld):\n" , t, t + prio_start, - thread_pids[t]); +printf (" Task %d (prio %d) (pid %ld):\n" , t, +CLAMP_PRIO (t + prio_start), thread_pids[t]);printf (" Max: %lld us\n" , tasks_max[t]);printf (" Min: %lld us\n" , tasks_min[t]);printf (" Tot: %lld us\n" , tasks_avg[t] * nr_runs);@@ -394,6 +397,13 @@ static void stop_log(int sig)int main (int argc,char **argv) { +/* +* Determine the valid priority range; subtracting one from the +* maximum to reserve the highest prio for main thread. +*/ + prio_min =sched_get_priority_min (SCHED_FIFO ); + prio_max =sched_get_priority_max (SCHED_FIFO ) -1 ; +int *threads;long i;int ret;@@ -448,7 +458,7 @@ int main(int argc, char **argv)for (i =0 ; i < nr_tasks; i++) { threads[i] =create_fifo_thread (start_task, (void *)i, - prio_start + i); +CLAMP_PRIO (prio_start + i)); }/* @@ -460,7 +470,8 @@ int main(int argc, char **argv)/* up our prio above all tasks */ memset (¶m,0 ,sizeof (param)); - param.sched_priority = nr_tasks + prio_start; + param.sched_priority =CLAMP (nr_tasks + prio_start, prio_min, + prio_max +1 );if (sched_setscheduler (0 ,SCHED_FIFO , ¶m))debug (DBG_WARN ,"Warning, can't set priority of main thread!\n" ); intv.tv_sec =INTERVAL /NS_PER_SEC ;
Signature · 1 line
Mailing list info: https://lists.linux.it/listinfo/ltp
Re: [LTP] [PATCH v1 1/2] Ensure prio is within valid range in `rt-migrate.c`
Am Mittwoch, 13. September 2023, 11:11:42 CEST schrieb Andrea Cervesato:
Quoted 4 lines
Hi!
I generally suggest to refactor test into new API if a structural
change is needed.
That is why I refrained from a structural change and implemented the fix with the minimum amount of change possible. This way the risk of introducing new bugs should be very small and the low "hanging fruit" is grabbed.
Quoted 2 lines
I would suggest to take a look at the code a bit closer and to guess how much effort we should put in order to rewrite it with new API.
I guess it would be doable and if that's wanted I can do that as the next step as a separate commit. Not sure how long it'll take me, maybe a couple of hours or a day (since I'm still new to ltp). (There is no ticket asking about such a refactoring explicitly so I honestly don't know whether it is wanted or whether we should invest our time better elsewhere.)
Signature · 1 line
Mailing list info: https://lists.linux.it/listinfo/ltp
Richard Palethorpe
AppliedRe: [LTP] [PATCH v1 1/2] Ensure prio is within valid range in `rt-migrate.c`
Hello,
Quoted 10 lines · Marius Kittler
Am Mittwoch, 13. September 2023, 11:11:42 CEST schrieb Andrea Cervesato:
Quoted 4 lines
Hi!
I generally suggest to refactor test into new API if a structural
change is needed.That is why I refrained from a structural change and implemented the fix with the minimum amount of change possible. This way the risk of introducing new bugs should be very small and the low "hanging fruit" is grabbed.
Quoted 8 lines
Quoted 2 lines
I would suggest to take a look at the code a bit closer and to guess how much effort we should put in order to rewrite it with new API.
I guess it would be doable and if that's wanted I can do that as the next step as a separate commit. Not sure how long it'll take me, maybe a couple of hours or a day (since I'm still new to ltp). (There is no ticket asking about such a refactoring explicitly so I honestly don't know whether it is wanted or whether we should invest our time better elsewhere.)
I merged it and the fix looks good. Thanks!
I'm not sure it is worth applying little fixes to these tests without a rewrite or investigating wether this test is a duplicate, but it's done now.
Signature · 5 lines
Thank you, Richard. -- Mailing list info: https://lists.linux.it/listinfo/ltp
PATCH 2/2 Prevent segmentation fault when negative task count specified
In reply to Marius Kittler--- testcases/realtime/func/rt-migrate/rt-migrate.c | 4 ++++ 1 file changed, 4 insertions(+)
testcases/realtime/func/rt-migrate/rt-migrate.c +4 -0
@@ -419,6 +419,10 @@ int main(int argc, char **argv) numcpus =sysconf (_SC_NPROCESSORS_ONLN); nr_tasks = numcpus +1 ; } +if (nr_tasks <0 ) { +printf ("The number of tasks must not be negative.\n" ); +exit (EXIT_FAILURE ); + } intervals =malloc (sizeof (stats_container_t) * nr_tasks);if (!intervals)
Signature · 5 lines
2.42.0 -- Mailing list info: https://lists.linux.it/listinfo/ltp
Re: [LTP] [PATCH v1 2/2] Prevent segmentation fault when negative task count specified
Hi!
patch is simple enough to be applied, but this test really needs to be refactored, as it's almost untouched for 15 years now and we moved to new API long time ago.
Quoted 10 lines · Marius Kittler
Signed-off-by Marius Kittler <[email protected]>--- testcases/realtime/func/rt-migrate/rt-migrate.c | 4 ++++ 1 file changed, 4 insertions(+)testcases/realtime/func/rt-migrate/rt-migrate.c +0
-0
testcases/realtime/func/rt-migrate/rt-migrate.c int main(int argc, char **argv) · line 428
Quoted 10 lines
testcases/realtime/func/rt-migrate/rt-migrate.c +4
-0@@ -419,6 +419,10 @@ int main(int argc, char **argv) numcpus =sysconf (_SC_NPROCESSORS_ONLN); nr_tasks = numcpus +1 ; } +if (nr_tasks <0 ) { +printf ("The number of tasks must not be negative.\n" ); +exit (EXIT_FAILURE ); + } intervals =malloc (sizeof (stats_container_t) * nr_tasks);if (!intervals)
Andrea
Signature · 1 line
Mailing list info: https://lists.linux.it/listinfo/ltp