Skip to contentSkip to conversation

staging: rtl8723bs: hal: Fix codespell-reported spelling mistakes

PATCH In review Bragatheswaran Manickavel 2 participants 4 messages Sep 17, 2023 – Sep 19, 2023 1 message not in the archive Staging

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 staging: rtl8723bs: hal: Fix codespell-reported spelling mistakes

They are appear to be spelling mistakes,
Initially identified in a codespell report and never been addressed so far.

./rtl8723b_phycfg.c:156: Threre ==> There, three ./rtl8723b_phycfg.c:283: Condig ==> Config ./rtl8723b_phycfg.c:328: Tranceiver ==> Transceiver

---
 drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c +3 -3
index a3bff27af523..7764896a04ea 100644
@@ -153,7 +153,7 @@ static u32 phy_RFSerialRead_8723B(
  * @Data:	The new register Data in the target bit position
  *			of the target to be read
  *
- * .. Note::	Threre are three types of serial operations:
+ * .. Note::	There are three types of serial operations:
  *		1. Software serial write
  *		2. Hardware LSSI-Low Speed Serial Interface
  *		3. Hardware HSSI-High speed
@@ -280,7 +280,7 @@ void PHY_SetRFReg_8723B(
 
 
 /*-----------------------------------------------------------------------------
- * PHY_MACConfig8192C - Condig MAC by header file or parameter file.
+ * PHY_MACConfig8192C - Config MAC by header file or parameter file.
  *
  * Revised History:
  *  When		Who		Remark
@@ -325,7 +325,7 @@ static void phy_InitBBRFRegisterDefinition(struct adapter *Adapter)
 	pHalData->PHYRegDef[RF_PATH_A].rfHSSIPara2 = rFPGA0_XA_HSSIParameter2;  /* wire control parameter2 */
 	pHalData->PHYRegDef[RF_PATH_B].rfHSSIPara2 = rFPGA0_XB_HSSIParameter2;  /* wire control parameter2 */
 
-	/*  Tranceiver Readback LSSI/HSPI mode */
+	/*  Transceiver Readback LSSI/HSPI mode */
 	pHalData->PHYRegDef[RF_PATH_A].rfLSSIReadBack = rFPGA0_XA_LSSIReadBack;
 	pHalData->PHYRegDef[RF_PATH_B].rfLSSIReadBack = rFPGA0_XB_LSSIReadBack;
 	pHalData->PHYRegDef[RF_PATH_A].rfLSSIReadBackPi = TransceiverA_HSPI_Readback;
Signature · 1 line
2.34.1
#1 lore raw
Quoted 38 lines · Bragatheswaran Manickavel

They are appear to be spelling mistakes,
Initially identified in a codespell report and never been addressed so far.

./rtl8723b_phycfg.c:156: Threre ==> There, three ./rtl8723b_phycfg.c:283: Condig ==> Config ./rtl8723b_phycfg.c:328: Tranceiver ==> Transceiver

---
drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c | 6 +++---

1 file changed, 3 insertions(+), 3 deletions(-)
drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c +2 -2
index a3bff27af523..7764896a04ea 100644
@@ -153,7 +153,7 @@ static u32 phy_RFSerialRead_8723B(
   * @Data:    The new register Data in the target bit position
   *            of the target to be read
   *
- * .. Note::    Threre are three types of serial operations:
+ * .. Note::    There are three types of serial operations:
   *        1. Software serial write
   *        2. Hardware LSSI-Low Speed Serial Interface
   *        3. Hardware HSSI-High speed
@@ -280,7 +280,7 @@ void PHY_SetRFReg_8723B(
 
 
 /*-----------------------------------------------------------------------------
- * PHY_MACConfig8192C - Condig MAC by header file or parameter file.
+ * PHY_MACConfig8192C - Config MAC by header file or parameter file.
   *
   * Revised History:
   *  When        Who        Remark
@@ -325,7 +325,7 @@ static void phy_InitBBRFRegisterDefinition(struct adapter *Adapter)

    pHalData->PHYRegDef[RF_PATH_A].rfHSSIPara2 = rFPGA0_XA_HSSIParameter2;  /* wire control parameter2 */ pHalData->PHYRegDef[RF_PATH_B].rfHSSIPara2 = rFPGA0_XB_HSSIParameter2;  /* wire control parameter2 */

Quoted 6 lines

-    /*  Tranceiver Readback LSSI/HSPI mode */
+    /*  Transceiver Readback LSSI/HSPI mode */ pHalData->PHYRegDef[RF_PATH_A].rfLSSIReadBack = rFPGA0_XA_LSSIReadBack; pHalData->PHYRegDef[RF_PATH_B].rfLSSIReadBack = rFPGA0_XB_LSSIReadBack; pHalData->PHYRegDef[RF_PATH_A].rfLSSIReadBackPi = TransceiverA_HSPI_Readback;

Gentle remainder

Thanks,
Bragathe

A message that is not in the archive (sent off-list or not yet received): CAHZF+VZVBkRP6D4xJEhoqKmr9MbjNFJ8A0NZXSwDEMFJhqBc-w@mail.gmail.com

maintainer
#3 lore raw
Quoted 1 line · Bragatheswaran Manickavel

Gentle reminder !

of what?

Quoted 2 lines

On Sun, 17 Sept 2023 at 19:19, Bragatheswaran Manickavel < [email protected]> wrote:

You sent this 2 days ago, for a spelling fix? Please relax, there is obviously no rush.

greg k-h

#4 lore raw
Quoted 4 lines · Greg KH
Quoted 1 line · Bragatheswaran Manickavel

Gentle reminder !

of what?

Sent this remainder for considering my patch.

Quoted 7 lines
Quoted 2 lines

On Sun, 17 Sept 2023 at 19:19, Bragatheswaran Manickavel < [email protected]> wrote:

You sent this 2 days ago, for a spelling fix? Please relax, there is obviously no rush.

greg k-h

Actually, this was my first patch mail. Just want to make sure, the way I sent the patch and other things are fine. Anyway thanks for your response

Thanks,
Bragathe