multilib.conf: Remove the incorrect PKG_CONFIG_PATH setting
PATCH 1/1 multilib.conf: Remove the incorrect PKG_CONFIG_PATH setting
From: Mingli Yu <[email protected]>
The PKG_CONFIG_PATH is set as ${WORKDIR}/recipe-sysroot/${datadir}/pkgconfig in multilib.conf. But there is no ${WORKDIR}/recipe-sysroot when multilib enabled such as below:
$ bitbake lib32-php
There is no ${WORKDIR}/recipe-sysroot and only ${WORKDIR}/lib32-recipe-sysroot
exists which already covered in meta/conf/bitbake.conf as below:
export PKG_CONFIG_PATH = "${PKG_CONFIG_DIR}:${STAGING_DATADIR}/pkgconfig"So remove the incorrect setting in multilib.conf.
--- meta/conf/multilib.conf | 9 --------- 1 file changed, 9 deletions(-)
meta/conf/multilib.conf +0 -9
@@ -22,15 +22,6 @@ MULTILIB_GLOBAL_VARIANTS ?= "lib32 lib64 libx32" OPKG_ARGS:append = " --force-maintainer --force-overwrite" -# When multilib is enabled, allarch recipes will be installed into the MACHINE -# sysroot, not MLPREFIXMACHINE. This means that anything using pkg-config to -# find an allarch pkgconfig file will fail as the PKG_CONFIG_PATH only looks -# inside the multilib sysroot. Fix this by explicitly adding the MACHINE's -# architecture-independent pkgconfig location to PKG_CONFIG_PATH. -PKG_CONFIG_PATH .= ":${WORKDIR}/recipe-sysroot/${datadir}/pkgconfig" -PKG_CONFIG_PATH[vardepsexclude] = "datadir WORKDIR" -PKG_CONFIG_PATH[vardepvalueexclude] = ":${WORKDIR}/recipe-sysroot/${datadir}/pkgconfig" - # These recipes don't need multilib variants, the ${BPN} PROVDES/RPROVDES # ${MLPREFIX}${BPN} NON_MULTILIB_RECIPES = "grub grub-efi make-mod-scripts ovmf u-boot"
Signature · 1 line
2.25.1
Quoted 27 lines · Mingli
From: Mingli Yu <[email protected]>
The
PKG_CONFIG_PATHis set as ${WORKDIR}/recipe-sysroot/${datadir}/pkgconfig in multilib.conf. But there is no ${WORKDIR}/recipe-sysroot when multilib enabled such as below:$ bitbake lib32-php There is no ${WORKDIR}/recipe-sysroot and only ${WORKDIR}/lib32-recipe-sysroot exists which already covered in meta/conf/bitbake.conf as below: export PKG_CONFIG_PATH = "${PKG_CONFIG_DIR}:${STAGING_DATADIR}/pkgconfig"So remove the incorrect setting in multilib.conf.
Signed-off-by Mingli Yu <[email protected]>--- meta/conf/multilib.conf | 9 --------- 1 file changed, 9 deletions(-)meta/conf/multilib.conf +0
-2@@ -22,15 +22,6 @@ MULTILIB_GLOBAL_VARIANTS ?= "lib32 lib64 libx32" OPKG_ARGS:append = " --force-maintainer --force-overwrite" -# When multilib is enabled, allarch recipes will be installed into the MACHINE -# sysroot, not MLPREFIXMACHINE. This means that anything using pkg-config to
meta/conf/multilib.conf MULTILIB_GLOBAL_VARIANTS ?= "lib32 lib64 libx32" · line 27
Quoted 10 lines
meta/conf/multilib.conf +0
-7-# find an allarch pkgconfig file will fail as the PKG_CONFIG_PATH only looks -# inside the multilib sysroot. Fix this by explicitly adding the MACHINE's -# architecture-independent pkgconfig location to PKG_CONFIG_PATH. -PKG_CONFIG_PATH .= ":${WORKDIR}/recipe-sysroot/${datadir}/pkgconfig" -PKG_CONFIG_PATH[vardepsexclude] = "datadir WORKDIR" -PKG_CONFIG_PATH[vardepvalueexclude] = ":${WORKDIR}/recipe-sysroot/${datadir}/pkgconfig" - # These recipes don't need multilib variants, the ${BPN} PROVDES/RPROVDES # ${MLPREFIX}${BPN} NON_MULTILIB_RECIPES = "grub grub-efi make-mod-scripts ovmf u-boot"
I'm not sure this is correct, did you check something with a dependency on an allarch recipe that has a pkgconfig file?
Cheers,
Richard
Hi Richard,
Quoted 29 lines · Richard Purdie
CAUTION: This email comes from a non Wind River email account!
Do not click links or open attachments unless you recognize the sender and know the content is safe.Quoted 25 lines · Mingli
From: Mingli Yu <[email protected]>
The
PKG_CONFIG_PATHis set as ${WORKDIR}/recipe-sysroot/${datadir}/pkgconfig in multilib.conf. But there is no ${WORKDIR}/recipe-sysroot when multilib enabled such as below:$ bitbake lib32-php There is no ${WORKDIR}/recipe-sysroot and only ${WORKDIR}/lib32-recipe-sysroot exists which already covered in meta/conf/bitbake.conf as below: export PKG_CONFIG_PATH = "${PKG_CONFIG_DIR}:${STAGING_DATADIR}/pkgconfig"So remove the incorrect setting in multilib.conf.
Signed-off-by Mingli Yu <[email protected]>--- meta/conf/multilib.conf | 9 --------- 1 file changed, 9 deletions(-)meta/conf/multilib.conf +0
-0@@ -22,15 +22,6 @@ MULTILIB_GLOBAL_VARIANTS ?= "lib32 lib64 libx32" OPKG_ARGS:append = " --force-maintainer --force-overwrite"
Quoted 15 lines
meta/conf/multilib.conf MULTILIB_GLOBAL_VARIANTS ?= "lib32 lib64 libx32" · line 27
Quoted 12 lines
meta/conf/multilib.conf +0
-9-# When multilib is enabled, allarch recipes will be installed into the MACHINE -# sysroot, not MLPREFIXMACHINE. This means that anything using pkg-config to -# find an allarch pkgconfig file will fail as the PKG_CONFIG_PATH only looks -# inside the multilib sysroot. Fix this by explicitly adding the MACHINE's -# architecture-independent pkgconfig location to PKG_CONFIG_PATH. -PKG_CONFIG_PATH .= ":${WORKDIR}/recipe-sysroot/${datadir}/pkgconfig" -PKG_CONFIG_PATH[vardepsexclude] = "datadir WORKDIR" -PKG_CONFIG_PATH[vardepvalueexclude] = ":${WORKDIR}/recipe-sysroot/${datadir}/pkgconfig" - # These recipes don't need multilib variants, the ${BPN} PROVDES/RPROVDES # ${MLPREFIX}${BPN} NON_MULTILIB_RECIPES = "grub grub-efi make-mod-scripts ovmf u-boot"I'm not sure this is correct, did you check something with a dependency on an allarch recipe that has a pkgconfig file?
Yes, I have checked the recipe font-alias which uses pkgconfig and depends on the allarch recipe encodings and also checked the iso-codes recipe.
Thanks,
Quoted 4 lines
Cheers,
Richard
Hello,
This causes failures on the autobuilders:
https://autobuilder.yoctoproject.org/typhoon/#/builders/80/builds/5799/steps/14/logs/stdio
https://autobuilder.yoctoproject.org/typhoon/#/builders/87/builds/5866/steps/14/logs/stdio
https://autobuilder.yoctoproject.org/typhoon/#/builders/79/builds/5849/steps/14/logs/stdio
https://autobuilder.yoctoproject.org/typhoon/#/builders/86/builds/5842/steps/14/logs/stdio
https://autobuilder.yoctoproject.org/typhoon/#/builders/127/builds/2195/steps/14/logs/stdio
Quoted 50 lines · Mingli
From: Mingli Yu <[email protected]>
The
PKG_CONFIG_PATHis set as ${WORKDIR}/recipe-sysroot/${datadir}/pkgconfig in multilib.conf. But there is no ${WORKDIR}/recipe-sysroot when multilib enabled such as below:$ bitbake lib32-php There is no ${WORKDIR}/recipe-sysroot and only ${WORKDIR}/lib32-recipe-sysroot exists which already covered in meta/conf/bitbake.conf as below: export PKG_CONFIG_PATH = "${PKG_CONFIG_DIR}:${STAGING_DATADIR}/pkgconfig"So remove the incorrect setting in multilib.conf.
Signed-off-by Mingli Yu <[email protected]>--- meta/conf/multilib.conf | 9 --------- 1 file changed, 9 deletions(-)meta/conf/multilib.conf +0
-9@@ -22,15 +22,6 @@ MULTILIB_GLOBAL_VARIANTS ?= "lib32 lib64 libx32" OPKG_ARGS:append = " --force-maintainer --force-overwrite" -# When multilib is enabled, allarch recipes will be installed into the MACHINE -# sysroot, not MLPREFIXMACHINE. This means that anything using pkg-config to -# find an allarch pkgconfig file will fail as the PKG_CONFIG_PATH only looks -# inside the multilib sysroot. Fix this by explicitly adding the MACHINE's -# architecture-independent pkgconfig location to PKG_CONFIG_PATH. -PKG_CONFIG_PATH .= ":${WORKDIR}/recipe-sysroot/${datadir}/pkgconfig" -PKG_CONFIG_PATH[vardepsexclude] = "datadir WORKDIR" -PKG_CONFIG_PATH[vardepvalueexclude] = ":${WORKDIR}/recipe-sysroot/${datadir}/pkgconfig" - # These recipes don't need multilib variants, the ${BPN} PROVDES/RPROVDES # ${MLPREFIX}${BPN} NON_MULTILIB_RECIPES = "grub grub-efi make-mod-scripts ovmf u-boot"Signature · 11 lines
2.25.1 -=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#187900): https://lists.openembedded.org/g/openembedded-core/message/187900 Mute This Topic: https://lists.openembedded.org/mt/101474719/3617179 Group Owner: [email protected] Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
Signature · 3 lines
Alexandre Belloni, co-owner and COO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com