Skip to contentSkip to conversation

KERNEL_DEVICETREE: 32-bit re-org

PATCH Superseded Trevor Woerner 3 participants 7 messages Oct 3, 2023 – Oct 4, 2023

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 KERNEL_DEVICETREE: 32-bit re-org

The upstream kernel reorganized the 32-bit arch/arm device-tree directory structure to separate out the device-trees by manufacturer (similar to the organization of the arch/arm64 device-trees). Update the references to 32-bit arm device-trees to match.

---
 conf/machine/firefly-rk3288.conf   | 2 +-
 conf/machine/marsboard-rk3066.conf | 2 +-
 conf/machine/radxarock.conf        | 2 +-
 conf/machine/rock2-square.conf     | 2 +-
 conf/machine/tinker-board-s.conf   | 2 +-
 conf/machine/tinker-board.conf     | 2 +-
 6 files changed, 6 insertions(+), 6 deletions(-)
conf/machine/firefly-rk3288.conf +1 -1
index 3270bb9f1657..6ff1be822008 100644
@@ -9,5 +9,5 @@
 require conf/machine/include/rk3288.inc
 require conf/machine/include/rockchip-wic.inc
 
-KERNEL_DEVICETREE = "rk3288-firefly.dtb"
+KERNEL_DEVICETREE = "rockchip/rk3288-firefly.dtb"
 UBOOT_MACHINE = "firefly-rk3288_defconfig"
conf/machine/marsboard-rk3066.conf +1 -1
index 52fd256a3445..36945e8e407b 100644
@@ -8,4 +8,4 @@
 
 require conf/machine/include/rk3066.inc
 
-KERNEL_DEVICETREE = "rk3066a-marsboard.dtb"
+KERNEL_DEVICETREE = "rockchip/rk3066a-marsboard.dtb"
conf/machine/radxarock.conf +1 -1
index 42d8848e1d09..6ad8474669d0 100644
@@ -9,4 +9,4 @@
 
 require conf/machine/include/rk3188.inc
 
-KERNEL_DEVICETREE = "rk3188-radxarock.dtb"
+KERNEL_DEVICETREE = "rockchip/rk3188-radxarock.dtb"
conf/machine/rock2-square.conf +1 -1
index 46064eebcc67..9468b9a6b559 100644
@@ -9,7 +9,7 @@
 require conf/machine/include/rk3288.inc
 
 SPL_BINARY = "u-boot-spl-dtb.bin"
-KERNEL_DEVICETREE = "rk3288-rock2-square.dtb"
+KERNEL_DEVICETREE = "rockchip/rk3288-rock2-square.dtb"
 UBOOT_MACHINE = "rock2_defconfig"
 
 # This board doesn't support the combined idbloader, so resort to the older
conf/machine/tinker-board-s.conf +1 -1
index 870b9bcdf8c7..3a656136c554 100644
@@ -7,5 +7,5 @@
 
 require conf/machine/include/tinker.inc
 
-KERNEL_DEVICETREE = "rk3288-tinker-s.dtb"
+KERNEL_DEVICETREE = "rockchip/rk3288-tinker-s.dtb"
 UBOOT_MACHINE = "tinker-s-rk3288_defconfig"
conf/machine/tinker-board.conf +1 -1
index 8fe5f6305d70..ef1a1c1ac098 100644
@@ -7,5 +7,5 @@
 
 require conf/machine/include/tinker.inc
 
-KERNEL_DEVICETREE = "rk3288-tinker.dtb"
+KERNEL_DEVICETREE = "rockchip/rk3288-tinker.dtb"
 UBOOT_MACHINE = "tinker-rk3288_defconfig"
Signature · 1 line
2.41.0.327.gaa9166bcc0ba
#1 lore raw

Hi Trevor,

Quoted 5 lines · Trevor Woerner via lists.yoctoproject.org

The upstream kernel reorganized the 32-bit arch/arm device-tree directory structure to separate out the device-trees by manufacturer (similar to the organization of the arch/arm64 device-trees). Update the references to 32-bit arm device-trees to match.

Does this work with linux-yocto and linux-yocto-dev from master or do we need to add some logic to support both (do you want to?).

Cheers,
Quentin

#2 lore raw
Quoted 11 lines · Quentin Schulz

Hi Trevor,

Quoted 5 lines · Trevor Woerner via lists.yoctoproject.org

The upstream kernel reorganized the 32-bit arch/arm device-tree directory structure to separate out the device-trees by manufacturer (similar to the organization of the arch/arm64 device-trees). Update the references to 32-bit arm device-trees to match.

Does this work with linux-yocto and linux-yocto-dev from master or do we need to add some logic to support both (do you want to?).

This doesn't work at all. I figured this was an easy one, made the tweak, submitted it, then added it to my jenkins builder to verify overnight. Woke up to find the do_image_wic() tasks failed. It's the same layout as the 64-bit machines but I'll have to dig in to figure out why it didn't work.

As for the linux-yocto vs linux-yocto-dev question I'll take a look. This happened with linux-yocto, so I would assume it is already the case with linux-yocto-dev. But if oe-core supports multiple versions of linux-yocto, that might be the tricky bit and yes, I would look into supporting both for the time-being until the transition period ends.

Although... any BSP layer supporting 32-bit machines will have similar issues, so perhaps there's a better way to solve this in oe-core?

Best regards,
Trevor

#3 lore raw

Hi Trevor,

Quoted 18 lines · Trevor Woerner
Quoted 11 lines · Quentin Schulz

Hi Trevor,

Quoted 5 lines · Trevor Woerner via lists.yoctoproject.org

The upstream kernel reorganized the 32-bit arch/arm device-tree directory structure to separate out the device-trees by manufacturer (similar to the organization of the arch/arm64 device-trees). Update the references to 32-bit arm device-trees to match.

Does this work with linux-yocto and linux-yocto-dev from master or do we need to add some logic to support both (do you want to?).

This doesn't work at all. I figured this was an easy one, made the tweak, submitted it, then added it to my jenkins builder to verify overnight. Woke up to find the do_image_wic() tasks failed. It's the same layout as the 64-bit machines but I'll have to dig in to figure out why it didn't work.

Quoted 6 lines

As for the linux-yocto vs linux-yocto-dev question I'll take a look. This happened with linux-yocto, so I would assume it is already the case with linux-yocto-dev. But if oe-core supports multiple versions of linux-yocto, that might be the tricky bit and yes, I would look into supporting both for the time-being until the transition period ends.

This was done in v6.5-rc1 so anything before won't work sadly.

master branch of poky supports 6.1 6.4 and 6.5 for linux-yocto (linux-yocto-dev being typically newer than the latest linux-yocto and the latest linux-yocto already having the change, I'll omit the change for linux-yocto-dev).

For reference, denix on IRC suggested you look at https://git.openembedded.org/openembedded-core/commit/?id=04ab57d20009d85eb566e83ae6fe1dcea4db7300 for what we're trying to do here. But I think this isn't applying to how the DTB is found but rather where it's put and this is too late for us.

I think we need to modify get_real_dtb_path_in_kernel in meta/classes-recipe/kernel-devicetree.bbclass instead.

We could handle it this way for example to allow a fallback:
"""

get_real_dtb_path_in_kernel:arm () {
	dtb="$1"
	dtb_path="${B}/arch/${ARCH}/boot/dts/$dtb"
        # Handle pre-v6.5 layout for Aarch32/ARM DTB
	if [ ! -e "$dtb_path" ]; then
		dtb_path="${B}/arch/${ARCH}/boot/dts/$(basename "$dtb")"
	fi
	if [ ! -e "$dtb_path" ]; then
		dtb_path="${B}/arch/${ARCH}/boot/$dtb"
	fi
        # Handle pre-v6.5 layout for Aarch32/ARM DTB
	if [ ! -e "$dtb_path" ]; then
		dtb_path="${B}/arch/${ARCH}/boot/$(basename "$dtb")"
	fi

	echo "$dtb_path"
}

"""
(to be determined if "arm" is a valid OVERRIDES, otherwise we need to check against "ARCH" bb variable; also not sure about the second basename if it's necessary at all).

Then you would just have KERNEL_DEVICETREE done the same way as in this patch:
KERNEL_DEVICETREE = "rockchip/rk3066a-marsboard.dtb"

and we wouldn't have to handle it on the recipe level.

Otherwise, we could do the following:
RK_KERNEL_DEVICETREE = "rockchip/rk3066a-marsboard.dtb" KERNEL_DEVICETREE ?= "${RK_KERNEL_DEVICETREE}"

then have a bbappend for all old-layout recipes:
linux-yocto-rt_6.1.bbappend
linux-yocto-tiny_6.1.bbappend
linux-yocto_6.1.bbappend
linux-yocto-rt_6.4.bbappend
linux-yocto-tiny_6.4.bbappend
linux-yocto_6.4.bbappend

KERNEL_DEVICETREE:arm = "${@' '.join(os.path.basename(dtb) for dtb in d.getVar('RK_KERNEL_DEVICETREE').split())}"

or something like that. We probably want to have something a bit more precise than just arm to avoid breaking other arm machine conf files which do not define RK_KERNEL_DEVICETREE, maybe KERNEL_DEVICETREE:rockchip:arm if that is even resolving properly.

Quoted 3 lines

Although... any BSP layer supporting 32-bit machines will have similar issues, so perhaps there's a better way to solve this in oe-core?

Adding Bruce in Cc, I hope he doesn't mind being summoned like this. Maybe you have an idea on how to handle both the new and old layout for ARM/Aarch32 DTB in the kernel for the KERNEL_DEVICETREE variable?

Cheers,
Quentin

#4 lore raw

With Bruce in Cc for real this time :)

Quoted 86 lines · Quentin Schulz

Hi Trevor,

Quoted 18 lines · Trevor Woerner
Quoted 11 lines · Quentin Schulz

Hi Trevor,

Quoted 5 lines · Trevor Woerner via lists.yoctoproject.org

The upstream kernel reorganized the 32-bit arch/arm device-tree directory structure to separate out the device-trees by manufacturer (similar to the organization of the arch/arm64 device-trees). Update the references to 32-bit arm device-trees to match.

Does this work with linux-yocto and linux-yocto-dev from master or do we need to add some logic to support both (do you want to?).

This doesn't work at all. I figured this was an easy one, made the tweak, submitted it, then added it to my jenkins builder to verify overnight. Woke up to find the do_image_wic() tasks failed. It's the same layout as the 64-bit machines but I'll have to dig in to figure out why it didn't work.

Quoted 6 lines

As for the linux-yocto vs linux-yocto-dev question I'll take a look. This happened with linux-yocto, so I would assume it is already the case with linux-yocto-dev. But if oe-core supports multiple versions of linux-yocto, that might be the tricky bit and yes, I would look into supporting both for the time-being until the transition period ends.

This was done in v6.5-rc1 so anything before won't work sadly.

master branch of poky supports 6.1 6.4 and 6.5 for linux-yocto (linux-yocto-dev being typically newer than the latest linux-yocto and the latest linux-yocto already having the change, I'll omit the change for linux-yocto-dev).

For reference, denix on IRC suggested you look at https://git.openembedded.org/openembedded-core/commit/?id=04ab57d20009d85eb566e83ae6fe1dcea4db7300 for what we're trying to do here. But I think this isn't applying to how the DTB is found but rather where it's put and this is too late for us.

I think we need to modify get_real_dtb_path_in_kernel in meta/classes-recipe/kernel-devicetree.bbclass instead.

We could handle it this way for example to allow a fallback:
"""
get_real_dtb_path_in_kernel:arm () {
    dtb="$1" dtb_path="${B}/arch/${ARCH}/boot/dts/$dtb"
        # Handle pre-v6.5 layout for Aarch32/ARM DTB if [ ! -e "$dtb_path" ]; then dtb_path="${B}/arch/${ARCH}/boot/dts/$(basename "$dtb")" fi
    if [ ! -e "$dtb_path" ]; then dtb_path="${B}/arch/${ARCH}/boot/$dtb"
    fi
        # Handle pre-v6.5 layout for Aarch32/ARM DTB if [ ! -e "$dtb_path" ]; then dtb_path="${B}/arch/${ARCH}/boot/$(basename "$dtb")" fi

    echo "$dtb_path"
}
"""
(to be determined if "arm" is a valid OVERRIDES, otherwise we need to check against "ARCH" bb variable; also not sure about the second basename if it's necessary at all).

Then you would just have KERNEL_DEVICETREE done the same way as in this patch:
KERNEL_DEVICETREE = "rockchip/rk3066a-marsboard.dtb"

and we wouldn't have to handle it on the recipe level.

Otherwise, we could do the following:
RK_KERNEL_DEVICETREE = "rockchip/rk3066a-marsboard.dtb" KERNEL_DEVICETREE ?= "${RK_KERNEL_DEVICETREE}"

then have a bbappend for all old-layout recipes:
linux-yocto-rt_6.1.bbappend
linux-yocto-tiny_6.1.bbappend
linux-yocto_6.1.bbappend
linux-yocto-rt_6.4.bbappend
linux-yocto-tiny_6.4.bbappend
linux-yocto_6.4.bbappend

KERNEL_DEVICETREE:arm = "${@' '.join(os.path.basename(dtb) for dtb in d.getVar('RK_KERNEL_DEVICETREE').split())}"

or something like that. We probably want to have something a bit more precise than just arm to avoid breaking other arm machine conf files which do not define RK_KERNEL_DEVICETREE, maybe KERNEL_DEVICETREE:rockchip:arm if that is even resolving properly.

Quoted 3 lines

Although... any BSP layer supporting 32-bit machines will have similar issues, so perhaps there's a better way to solve this in oe-core?

Adding Bruce in Cc, I hope he doesn't mind being summoned like this. Maybe you have an idea on how to handle both the new and old layout for ARM/Aarch32 DTB in the kernel for the KERNEL_DEVICETREE variable?

Cheers,
Quentin

#5 lore raw
In reply to Quentin Schulz
Quoted 100 lines · Quentin Schulz via lists.yoctoproject.org

Hi Trevor,

Quoted 5 lines · Trevor Woerner
Quoted 4 lines · Quentin Schulz

Hi Trevor,

Quoted 1 line · Trevor Woerner via lists.yoctoproject.org

The upstream kernel reorganized the 32-bit arch/arm device-tree

directory structure

Quoted 1 line
Quoted 1 line
Quoted 1 line

to separate out the device-trees by manufacturer (similar to the

organization

Quoted 9 lines
Quoted 6 lines
Quoted 3 lines

of the arch/arm64 device-trees). Update the references to 32-bit arm device-trees to match.

Does this work with linux-yocto and linux-yocto-dev from master or do we need to add some logic to support both (do you want to?).

This doesn't work at all. I figured this was an easy one, made the tweak, submitted it, then added it to my jenkins builder to verify overnight.

Woke up

Quoted 1 line

to find the do_image_wic() tasks failed. It's the same layout as the

64-bit

Quoted 5 lines

machines but I'll have to dig in to figure out why it didn't work.

As for the linux-yocto vs linux-yocto-dev question I'll take a look. This happened with linux-yocto, so I would assume it is already the case with linux-yocto-dev. But if oe-core supports multiple versions of

linux-yocto,

Quoted 1 line

that might be the tricky bit and yes, I would look into supporting both

for

Quoted 2 lines

the time-being until the transition period ends.

This was done in v6.5-rc1 so anything before won't work sadly.

master branch of poky supports 6.1 6.4 and 6.5 for linux-yocto (linux-yocto-dev being typically newer than the latest linux-yocto and the latest linux-yocto already having the change, I'll omit the change for linux-yocto-dev).

For reference, denix on IRC suggested you look at

https://git.openembedded.org/openembedded-core/commit/?id=04ab57d20009d85eb566e83ae6fe1dcea4db7300
for what we're trying to do here. But I think this isn't applying to how the DTB is found but rather where it's put and this is too late for us.

I think we need to modify get_real_dtb_path_in_kernel in meta/classes-recipe/kernel-devicetree.bbclass instead.

We could handle it this way for example to allow a fallback:
"""

get_real_dtb_path_in_kernel:arm () {
        dtb="$1"
        dtb_path="${B}/arch/${ARCH}/boot/dts/$dtb"
         # Handle pre-v6.5 layout for Aarch32/ARM DTB
        if [ ! -e "$dtb_path" ]; then
                dtb_path="${B}/arch/${ARCH}/boot/dts/$(basename "$dtb")"
        fi
        if [ ! -e "$dtb_path" ]; then
                dtb_path="${B}/arch/${ARCH}/boot/$dtb"
        fi
         # Handle pre-v6.5 layout for Aarch32/ARM DTB
        if [ ! -e "$dtb_path" ]; then
                dtb_path="${B}/arch/${ARCH}/boot/$(basename "$dtb")"
        fi

        echo "$dtb_path"
}

"""
(to be determined if "arm" is a valid OVERRIDES, otherwise we need to check against "ARCH" bb variable; also not sure about the second basename if it's necessary at all).

Then you would just have KERNEL_DEVICETREE done the same way as in this patch:
KERNEL_DEVICETREE = "rockchip/rk3066a-marsboard.dtb"

and we wouldn't have to handle it on the recipe level.

Otherwise, we could do the following:
RK_KERNEL_DEVICETREE = "rockchip/rk3066a-marsboard.dtb" KERNEL_DEVICETREE ?= "${RK_KERNEL_DEVICETREE}"

then have a bbappend for all old-layout recipes:
linux-yocto-rt_6.1.bbappend
linux-yocto-tiny_6.1.bbappend
linux-yocto_6.1.bbappend
linux-yocto-rt_6.4.bbappend
linux-yocto-tiny_6.4.bbappend
linux-yocto_6.4.bbappend

KERNEL_DEVICETREE:arm = "${@' '.join(os.path.basename(dtb) for dtb in d.getVar('RK_KERNEL_DEVICETREE').split())}"

or something like that. We probably want to have something a bit more precise than just arm to avoid breaking other arm machine conf files which do not define RK_KERNEL_DEVICETREE, maybe KERNEL_DEVICETREE:rockchip:arm if that is even resolving properly.

Quoted 8 lines
Quoted 1 line

Although... any BSP layer supporting 32-bit machines will have similar

issues,

Quoted 2 lines

so perhaps there's a better way to solve this in oe-core?

Adding Bruce in Cc, I hope he doesn't mind being summoned like this. Maybe you have an idea on how to handle both the new and old layout for ARM/Aarch32 DTB in the kernel for the KERNEL_DEVICETREE variable?

My last run in with this may have been before some of the most recent device tree handling patches, and/or I may have been doing it wrong.

But my solution was to simply override the variable in a kernel version specific bbappend, and not do it in the conf files.

But of course, if that variable is being interpreted by a different class in the global namespace, then the kernel bbappend approach isn't going to work anymore.

I've stayed away from utilities or searching, etc, rather just a way for the configuration to specify directly what to find, as anything that searches ends up being fragile.

Bruce

Quoted 15 lines

Cheers,
Quentin

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group. View/Reply Online (#61235):
https://lists.yoctoproject.org/g/yocto/message/61235
Mute This Topic: https://lists.yoctoproject.org/mt/101728482/1050810
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub [ [email protected]]
-=-=-=-=-=-=-=-=-=-=-=-

Signature · 3 lines
- Thou shalt not follow the NULL pointer, for chaos and madness await thee
at its end
- "Use the force Harry" - Gandalf, Star Trek II
#6 lore raw
Quoted 118 lines · Bruce Ashfield
Quoted 100 lines · Quentin Schulz via lists.yoctoproject.org

Hi Trevor,

Quoted 5 lines · Trevor Woerner
Quoted 4 lines · Quentin Schulz

Hi Trevor,

Quoted 1 line · Trevor Woerner via lists.yoctoproject.org

The upstream kernel reorganized the 32-bit arch/arm device-tree

directory structure

Quoted 1 line
Quoted 1 line
Quoted 1 line

to separate out the device-trees by manufacturer (similar to the

organization

Quoted 9 lines
Quoted 6 lines
Quoted 3 lines

of the arch/arm64 device-trees). Update the references to 32-bit arm device-trees to match.

Does this work with linux-yocto and linux-yocto-dev from master or do we need to add some logic to support both (do you want to?).

This doesn't work at all. I figured this was an easy one, made the tweak, submitted it, then added it to my jenkins builder to verify overnight.

Woke up

Quoted 1 line

to find the do_image_wic() tasks failed. It's the same layout as the

64-bit

Quoted 5 lines

machines but I'll have to dig in to figure out why it didn't work.

As for the linux-yocto vs linux-yocto-dev question I'll take a look. This happened with linux-yocto, so I would assume it is already the case with linux-yocto-dev. But if oe-core supports multiple versions of

linux-yocto,

Quoted 1 line

that might be the tricky bit and yes, I would look into supporting both

for

Quoted 2 lines

the time-being until the transition period ends.

This was done in v6.5-rc1 so anything before won't work sadly.

master branch of poky supports 6.1 6.4 and 6.5 for linux-yocto (linux-yocto-dev being typically newer than the latest linux-yocto and the latest linux-yocto already having the change, I'll omit the change for linux-yocto-dev).

For reference, denix on IRC suggested you look at

https://git.openembedded.org/openembedded-core/commit/?id=04ab57d20009d85eb566e83ae6fe1dcea4db7300
for what we're trying to do here. But I think this isn't applying to how the DTB is found but rather where it's put and this is too late for us.

I think we need to modify get_real_dtb_path_in_kernel in meta/classes-recipe/kernel-devicetree.bbclass instead.

We could handle it this way for example to allow a fallback:
"""

get_real_dtb_path_in_kernel:arm () {
        dtb="$1"
        dtb_path="${B}/arch/${ARCH}/boot/dts/$dtb"
         # Handle pre-v6.5 layout for Aarch32/ARM DTB
        if [ ! -e "$dtb_path" ]; then
                dtb_path="${B}/arch/${ARCH}/boot/dts/$(basename "$dtb")"
        fi
        if [ ! -e "$dtb_path" ]; then
                dtb_path="${B}/arch/${ARCH}/boot/$dtb"
        fi
         # Handle pre-v6.5 layout for Aarch32/ARM DTB
        if [ ! -e "$dtb_path" ]; then
                dtb_path="${B}/arch/${ARCH}/boot/$(basename "$dtb")"
        fi

        echo "$dtb_path"
}

"""
(to be determined if "arm" is a valid OVERRIDES, otherwise we need to check against "ARCH" bb variable; also not sure about the second basename if it's necessary at all).

Then you would just have KERNEL_DEVICETREE done the same way as in this patch:
KERNEL_DEVICETREE = "rockchip/rk3066a-marsboard.dtb"

and we wouldn't have to handle it on the recipe level.

Otherwise, we could do the following:
RK_KERNEL_DEVICETREE = "rockchip/rk3066a-marsboard.dtb" KERNEL_DEVICETREE ?= "${RK_KERNEL_DEVICETREE}"

then have a bbappend for all old-layout recipes:
linux-yocto-rt_6.1.bbappend
linux-yocto-tiny_6.1.bbappend
linux-yocto_6.1.bbappend
linux-yocto-rt_6.4.bbappend
linux-yocto-tiny_6.4.bbappend
linux-yocto_6.4.bbappend

KERNEL_DEVICETREE:arm = "${@' '.join(os.path.basename(dtb) for dtb in d.getVar('RK_KERNEL_DEVICETREE').split())}"

or something like that. We probably want to have something a bit more precise than just arm to avoid breaking other arm machine conf files which do not define RK_KERNEL_DEVICETREE, maybe KERNEL_DEVICETREE:rockchip:arm if that is even resolving properly.

Quoted 8 lines
Quoted 1 line

Although... any BSP layer supporting 32-bit machines will have similar

issues,

Quoted 2 lines

so perhaps there's a better way to solve this in oe-core?

Adding Bruce in Cc, I hope he doesn't mind being summoned like this. Maybe you have an idea on how to handle both the new and old layout for ARM/Aarch32 DTB in the kernel for the KERNEL_DEVICETREE variable?

My last run in with this may have been before some of the most recent device tree handling patches, and/or I may have been doing it wrong.

But my solution was to simply override the variable in a kernel version specific bbappend, and not do it in the conf files.

Quoted 7 lines

But of course, if that variable is being interpreted by a different class in the global namespace, then the kernel bbappend approach isn't going to work anymore.

I've stayed away from utilities or searching, etc, rather just a way for the configuration to specify directly what to find, as anything that searches ends up being fragile.

The biggest tangle is that the master branch supports 6.1, 6.4, and 6.5. Getting something to work with one version at at time isn't hard; getting it to work simultaneously with all 3 (and others?) is the tricky part.

In a perfect world we could have linux-kernel-version-specific machine conf sections/files... but that would be crazy!

I've been poking at this from different angles off-and-on for the last couple days. The more I look at it, the more I like what meta-ti-bsp did. That's probably what I'm going to do:

conf/machine/MACHINE.conf file has:
- KERNEL_DEVICETREE that just lists the bare dtb file (without directories)
- KERNEL_DEVICETREE_PREFIX that lists possible directory names

recipes-kernel/linux/linux-yocto% bbappends have logic to check combinations of KERNEL_DEVICETREE_PREFIX+KERNEL_DEVICETREE to find the actual dtb.

Something probably also needs to be added to IMAGE_BOOT_FILES so wic works too.

NOTE: given that this is meta-rockchip, the KERNEL_DEVICETREE_PREFIX could simply be known to be "rockchip" a-priori; it doesn't necessarily need to be that flexible.

And the real catch is that this is only a problem today because a specific OE branch has both pre- and post- cleanup kernel versions. If the OE branches didn't mix the two, this wouldn't be a problem. And someday once master has moved away from having both pre- and post- cleanup kernel versions, we can throw all this infrastructure out (on master) going forward.

Best regards,
Trevor