tools/power turbostat: Increase the limit for fd opened
PATCH v2 1/1 tools/power turbostat: Increase the limit for fd opened
When running turbostat, a system with 512 cpus reaches the limit for maximum number of file descriptors that can be opened. To solve this problem, the limit is raised to 2^15, which is a large enough number.
Below data is collected from AMD server systems while running turbostat:
|-----------+-------------------------------| | # of cpus | # of opened fds for turbostat | |-----------+-------------------------------| | 128 | 260 | |-----------+-------------------------------| | 192 | 388 | |-----------+-------------------------------| | 512 | 1028 | |-----------+-------------------------------|
So, the new max limit would be sufficient up to 2^14 cpus (but this also depends on how many counters are enabled).
---
v1 -> v2:
- Take care of already higher rlim_max, rlim_curr
- Minor tweak in commit text
tools/power/x86/turbostat/turbostat.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
tools/power/x86/turbostat/turbostat.c +21 -0
@@ -53,6 +53,8 @@#define NAME_BYTES 20#define PATH_BYTES 128 +#define MAX_NOFILE 0x8000 +enum counter_scope {SCOPE_CPU ,SCOPE_CORE ,SCOPE_PACKAGE };enum counter_type {COUNTER_ITEMS ,COUNTER_CYCLES ,COUNTER_SECONDS ,COUNTER_USEC };enum counter_format {FORMAT_RAW ,FORMAT_DELTA ,FORMAT_PERCENT };
@@ -6717,6 +6719,22 @@ void cmdline(int argc, char **argv) } } +void set_rlimit (void ) +{ +struct rlimit limit; + +if (getrlimit (RLIMIT_NOFILE , &limit) <0 ) +err (1 ,"Failed to get rlimit" ); + +if (limit.rlim_max <MAX_NOFILE ) + limit.rlim_max =MAX_NOFILE ; +if (limit.rlim_cur <MAX_NOFILE ) + limit.rlim_cur =MAX_NOFILE ; + +if (setrlimit (RLIMIT_NOFILE , &limit) <0 ) +err (1 ,"Failed to set rlimit" ); +} +int main (int argc,char **argv) { outf = stderr;
@@ -6729,6 +6747,9 @@ int main(int argc, char **argv)probe_sysfs (); +if (!getuid ()) +set_rlimit (); +turbostat_init ();msr_sum_record ();
Signature · 1 line
2.34.1
Gentle ping.
Thanks,
Wyes
Quoted 79 lines · Wyes Karny
When running turbostat, a system with 512 cpus reaches the limit for maximum number of file descriptors that can be opened. To solve this problem, the limit is raised to 2^15, which is a large enough number.
Below data is collected from AMD server systems while running turbostat:
|-----------+-------------------------------| | # of cpus | # of opened fds for turbostat | |-----------+-------------------------------| | 128 | 260 | |-----------+-------------------------------| | 192 | 388 | |-----------+-------------------------------| | 512 | 1028 | |-----------+-------------------------------|So, the new max limit would be sufficient up to 2^14 cpus (but this also depends on how many counters are enabled).
Reviewed-by Doug Smythies <[email protected]>Tested-by Doug Smythies <[email protected]>Signed-off-by Wyes Karny <[email protected]>---
v1 -> v2:
- Take care of already higherrlim_max,rlim_curr
- Minor tweak in commit texttools/power/x86/turbostat/turbostat.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)tools/power/x86/turbostat/turbostat.c +21
-0@@ -53,6 +53,8 @@#define NAME_BYTES 20#define PATH_BYTES 128 +#define MAX_NOFILE 0x8000 +enum counter_scope {SCOPE_CPU ,SCOPE_CORE ,SCOPE_PACKAGE };enum counter_type {COUNTER_ITEMS ,COUNTER_CYCLES ,COUNTER_SECONDS ,COUNTER_USEC };enum counter_format {FORMAT_RAW ,FORMAT_DELTA ,FORMAT_PERCENT };@@ -6717,6 +6719,22 @@ void cmdline(int argc, char **argv) } } +void set_rlimit (void ) +{ +struct rlimit limit; + +if (getrlimit (RLIMIT_NOFILE , &limit) <0 ) +err (1 ,"Failed to get rlimit" ); + +if (limit.rlim_max <MAX_NOFILE ) + limit.rlim_max =MAX_NOFILE ; +if (limit.rlim_cur <MAX_NOFILE ) + limit.rlim_cur =MAX_NOFILE ; + +if (setrlimit (RLIMIT_NOFILE , &limit) <0 ) +err (1 ,"Failed to set rlimit" ); +} +int main (int argc,char **argv) { outf = stderr;@@ -6729,6 +6747,9 @@ int main(int argc, char **argv)probe_sysfs (); +if (!getuid ()) +set_rlimit (); +turbostat_init ();msr_sum_record ();Signature · 1 line
2.34.1
Applied
Thanks Wyes!
Quoted 80 lines · Wyes Karny
When running turbostat, a system with 512 cpus reaches the limit for maximum number of file descriptors that can be opened. To solve this problem, the limit is raised to 2^15, which is a large enough number.
Below data is collected from AMD server systems while running turbostat:
|-----------+-------------------------------| | # of cpus | # of opened fds for turbostat | |-----------+-------------------------------| | 128 | 260 | |-----------+-------------------------------| | 192 | 388 | |-----------+-------------------------------| | 512 | 1028 | |-----------+-------------------------------|So, the new max limit would be sufficient up to 2^14 cpus (but this also depends on how many counters are enabled).
Reviewed-by Doug Smythies <[email protected]>Tested-by Doug Smythies <[email protected]>Signed-off-by Wyes Karny <[email protected]>---
v1 -> v2:
- Take care of already higherrlim_max,rlim_curr
- Minor tweak in commit texttools/power/x86/turbostat/turbostat.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)tools/power/x86/turbostat/turbostat.c +21
-1@@ -53,6 +53,8 @@#define NAME_BYTES 20#define PATH_BYTES 128 +#define MAX_NOFILE 0x8000 +enum counter_scope {SCOPE_CPU ,SCOPE_CORE ,SCOPE_PACKAGE };enum counter_type {COUNTER_ITEMS ,COUNTER_CYCLES ,COUNTER_SECONDS ,COUNTER_USEC };enum counter_format {FORMAT_RAW ,FORMAT_DELTA ,FORMAT_PERCENT };@@ -6717,6 +6719,22 @@ void cmdline(int argc, char **argv) } } +void set_rlimit (void ) +{ +struct rlimit limit; + +if (getrlimit (RLIMIT_NOFILE , &limit) <0 ) +err (1 ,"Failed to get rlimit" ); + +if (limit.rlim_max <MAX_NOFILE ) + limit.rlim_max =MAX_NOFILE ; +if (limit.rlim_cur <MAX_NOFILE ) + limit.rlim_cur =MAX_NOFILE ; + +if (setrlimit (RLIMIT_NOFILE , &limit) <0 ) +err (1 ,"Failed to set rlimit" ); +} +int main (int argc,char **argv) { outf = stderr;@@ -6729,6 +6747,9 @@ int main(int argc, char **argv)probe_sysfs (); +if (!getuid ()) +set_rlimit (); +turbostat_init ();msr_sum_record (); --2.34.1
Signature · 1 line
Len Brown, Intel