Skip to contentSkip to conversation

IIO: 1st set of new device support, features and cleanup for 6.7

GIT PULL Jonathan Cameron 2 participants 2 messages Oct 17, 2023 – Oct 20, 2023 IIO

lore
Share & tools
lore

Jonathan Cameron

author maintainer
#0 lore raw

The following changes since commit 0bb80ecc33a8fb5a682236443c1e740d5c917d1d:

Linux 6.6-rc1 (2023-09-10 16:28:41 -0700)

are available in the Git repository at:

https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-6.7a

for you to fetch changes up to 89a1d2f064d2ae77a9cd6a8c7ac42b3c1647efa5:

iio: Use device_get_match_data() (2023-10-14 17:18:36 +0100)

----------------------------------------------------------------
IIO: 1st set of new device support, features and cleanup for 6.7

Particularly great to see a resolver driver move out of staging via a massive set of changes. Only took 13 years :)

One small patch added then reverted due to a report of test breakage (ashai-kasei,ak8975: Drop deprecated enums.)

An immutable branch was used for some hid-senors changes in case there was a need to take them into the HID tree as well.

New device support
-----------------

adi,hmc425a
- Add support for HMC540SLP3E broadband 4-bit digital attenuator.
kionix,kx022a
- Add support for the kx132-1211 accelerometer. Require significant driver rework to enable this including add a chip type specific structure to deal with the chip differences.
- Add support for the kx132acr-lbz accelerometer (subset of the kx022a feature set).
lltc,ltc2309
- New driver for this 8 channel ADC.
microchip,mcp3911
- Add support for rest of mcp391x family of ADCs (there are various differences beyond simple channel count variation. Series includes some general driver cleanup.
microchip,mcp3564
- New driver for MCP3461, MCP3462, MCP3464, MCP3541, MCP3562, MCP3564 and their R variants of 16/24bit ADCs. A few minor fixed followed.
rohm,bu1390
- New driver for this pressure sensor.

Staging graduation
------------------

adi,ad1210 (after 13 or so years :)
- More or less a complete (step-wise) rewrite of this resolver driver to bring it up to date with modern IIO standards. The fault signal handling mapping to event channels was particularly complex and significant part of the changes.

Features
--------

iio-core
- Add chromacity and color temperature channel types.
adi,ad7192
- Oversampling ratio control (called fast settling in datasheet).
adi,adis16475
- Add core support and then driver support for delta angle and delta velocity channels. These are intended for summation to establish angle and velocity changes over larger timescales. Fix was needed for alignment after the temperature channel. Further fix reduced set of devices for which the buffer support was applicable as seems burst reads don't cover these on all devices.
hid-sensors-als
- Chromacity and color temperatures support including in amd sfh.
stx104
- Add support for counter subsystem to this multipurpose device.
ti,twl6030
- Add missing device tree binding description.

Clean up and minor fixes.
------------------------

treewide
- Drop some unused declarations across IIO.
- Make more use of device_get_match_data() instead of OF specific approaches.
Similar cleanup to sets of drivers.
- Stop platform remove callbacks returning anything by using the temporary remove_new() callback.
- Use i2c_get_match_data() to cope nicely with all types of ID table entry.
- Use device_get_match_data() for various platform device to cope with more types of firmware.
- Convert from enum to pointer in ID tables allowing use of

    i2c_get_match_data().

- Fix sorting on some ID tables.
- Include specific string helper headers rather than simply string_helpers.h
docs
- Better description of the ordering requirements etc for available_scan_masks.
tools
- Handle alignment of mixed sizes where the last element isn't the biggest correctly. Seems that doesn't happen often!
adi,ad2s1210
- Lots of work from David Lechner on this driver including a few fixes that are going with the rework to avoid slowing that down.
adi,ad4310
- Replace deprecated devm_clk_register()
adi,ad74413r
- Bring the channel function setting inline with the datasheet.
adi,ad7192
- Change to FIELD_PREP(), FIELD_GET().
- Calculate f_order from the sinc filter and chop filter states.
- Move more per chip config into data in struct ad7192_chip_info
- Cleanup unused parameter in channel macros.
adi,adf4350
- Make use of devm_* to simplify error handling for many of the setup calls in probe() / tear down in remove() and error paths. Some more work to be done on this one.
- Use dev_err_probe() for errors in probe() callback.
adi,adf4413
- Typo in function name prefix.
adi,adxl345
- Add channel scale to the chip type specific structure and drop using a type field previously used for indirection.
asahi,ak8985
- Fix a mismatch introduced when switching from enum->pointers in the match tables.
amlogic,meson
- Expand error logging during probe.
invensense,mpu6050
- Support level-shifter control. Whilst no one is sure exactly what this is doing it is needed for some old boards.
- Document mount-matrix dt-binding.
mediatek,mt6577
- Use devm_clk_get_enabled() to replace open coded version and move everything over to being device managed. Drop now empty remove() callback. Fix follows to put the drvdata back.
- Use dev_err_probe() for error reporting in probe() callback.
memsic,mxc4005
- Add of_match_table.
microchip,mcp4725
- Move various chip specific data from being looked up by chip ID to data in the chip type specific structure.
silicon-labs,si7005
- Add of_match_table and entry in trivial-devices.yaml
st,lsm6dsx
- Add missing mount-matrix dt binding documentation.
st,spear
- Use devm_clk_get_enabled() and some other devm calls to move everything over to being device managed. Drop now empty remove() callback.
- Use dev_err_probe() to better handled deferred probing and tidy up error reporting in probe() callback.
st,stm32-adc
- Add a bit of additional checking in probe() to protect against a NULL pointer (no known path to trigger it today).
- Replace deprecated strncpy()
ti,ads1015
- Allow for edge triggers.
- Document interrupt in dt-bindings.

----------------------------------------------------------------
Alisa-Dariana Roman (5):
iio: adc: ad7192: Use bitfield access macros
iio: adc: ad7192: Improve f_order computation
iio: adc: ad7192: Organize chip info
iio: adc: ad7192: Remove unused member
iio: adc: ad7192: Add fast settling support

Ana-Maria Cusco (1):
dt-bindings: iio: hmc425a: add entry for HMC540S

Andreas Kemnade (3):
dt-bindings: iio: adc: Add TI TWL603X GPADC
dt-bindings: iio: imu: mpu6050: Add level shifter
iio: imu: mpu6050: add level shifter flag

André Apitzsch (1):
iio: magnetometer: ak8975: Fix 'Unexpected device' error

Andy Shen Shen (1):
iio: adc: palmas_gpadc: Drop duplicated the in comment.

Andy Shevchenko (3):
iio: accel: kionix-kx022a: Use correct header(s) instead of string_helpers.h
iio: accel: msa311: Use correct header(s) instead of string_helpers.h
iio: dac: stm32-dac: Use correct header(s) instead of string_helpers.h

AngeloGioacchino Del Regno (1):
iio: adc: mt6577_auxadc: Fix kernel panic on suspend

Antoniu Miclaus (3):
iio: addac: ad74413r: fix function prefix typo
iio: addac: ad74413r: update channel function set
MAINTAINERS: fix Analog Devices website link

Basavaraj Natikar (9):
iio: hid-sensor-als: Use channel index to support more hub attributes
iio: Add channel type light color temperature
iio: hid-sensor-als: Add light color temperature support
HID: amd_sfh: Add support for light color temperature
HID: amd_sfh: Add support for SFH1.1 light color temperature
iio: Add channel type for chromaticity
iio: hid-sensor-als: Add light chromaticity support
HID: amd_sfh: Add light chromaticity support
HID: amd_sfh: Add light chromaticity for SFH1.1

Biju Das (30):

      iio: accel: mma8452: Convert enum->pointer for data in the ID table
      iio: accel: mma8452: Sort match tables
      iio: chemical: vz89x: Convert enum->pointer for data in the match tables
      iio: chemical: atlas-sensor: Convert enum->pointer for data in the match tables
      iio: chemical: atlas-ezo-sensor: Simplify probe()
      iio: proximity: sx9310: Convert enum->pointer for match data table
      iio: dac: ti-dac5571: Use i2c_get_match_data()
      iio: dac: ti-dac5571: Sort match tables
      iio: magnetometer: yamaha-yas530: Use i2c_get_match_data()
      iio: adc: max1363: Use i2c_get_match_data()
      iio: accel: bma180: Convert enum->pointer for data in the match table
      iio: mlx90614: Use i2c_get_match_data()
      iio: magnetometer: ak8975: Convert enum->pointer for data in the match tables
      iio: magnetometer: ak8975: Sort ID and ACPI tables
      dt-bindings: iio: magnetometer: asahi-kasei,ak8975: Drop deprecated enums
      iio: chemical: sgp30: Convert enum->pointer for data in the match tables
      iio: potentiometer: ds1803: Convert enum->pointer for data in the ID table
      iio: potentiometer: ad5110: Use i2c_get_match_data()
      iio: light: opt4001: Use i2c_get_match_data()
      iio: temperature: tmp117: Convert enum->pointer for data in the match tables
      iio: adc: ti-adc081c: Simplify probe()
      iio: adc: ti-ads1015: Simplify probe()
      iio: adc: ltc2497: Simplify probe()
      iio: accel: adxl345: Convert enum->pointer for data in match data table
      iio: accel: adxl345: Simplify adxl345_read_raw()
      iio: dac: mcp4725: Replace variable 'id' from struct mcp4725_data
      iio: dac: mcp4725: Use i2c_get_match_data()
      iio: dac: mcp4725: Add use_ext_ref_voltage to struct mcp4725_chip_info
      iio: dac: mcp4725: Add dac_reg_offset to struct mcp4725_chip_info
      iio: pressure: ms5637: Use i2c_get_match_data()

David Lechner (39):
staging: iio: resolver: ad2s1210: fix ad2s1210_show_fault
staging: iio: resolver: ad2s1210: fix not restoring sample gpio in channel read
staging: iio: resolver: ad2s1210: fix use before initialization
staging: iio: resolver: ad2s1210: remove call to spi_setup()
staging: iio: resolver: ad2s1210: check return of ad2s1210_initial()
staging: iio: resolver: ad2s1210: remove spi_set_drvdata()
staging: iio: resolver: ad2s1210: sort imports
staging: iio: resolver: ad2s1210: always use 16-bit value for raw read
staging: iio: resolver: ad2s1210: implement IIO_CHAN_INFO_SCALE
staging: iio: resolver: ad2s1210: use devicetree to get CLKIN rate
staging: iio: resolver: ad2s1210: use regmap for config registers
staging: iio: resolver: ad2s1210: add debugfs reg access
staging: iio: resolver: ad2s1210: remove config attribute
staging: iio: resolver: ad2s1210: rework gpios
staging: iio: resolver: ad2s1210: refactor setting excitation frequency
staging: iio: resolver: ad2s1210: read excitation frequency from control register
dt-bindings: iio: resolver: add devicetree bindings for ad2s1210
staging: iio: resolver: ad2s1210: do not use fault register for dummy read
staging: iio: resolver: ad2s1210: implement hysteresis as channel attr
staging: iio: resolver: ad2s1210: convert fexcit to channel attribute
staging: iio: resolver: ad2s1210: convert resolution to devicetree property
staging: iio: resolver: ad2s1210: add phase lock range support
staging: iio: resolver: ad2s1210: add triggered buffer support
staging: iio: resolver: ad2s1210: convert LOT threshold attrs to event attrs
staging: iio: resolver: ad2s1210: convert LOS threshold to event attr
staging: iio: resolver: ad2s1210: convert DOS overrange threshold to event attr
staging: iio: resolver: ad2s1210: convert DOS mismatch threshold to event attr
staging: iio: resolver: ad2s1210: rename DOS reset min/max attrs
iio: event: add optional event label support
staging: iio: resolver: ad2s1210: implement fault events
staging: iio: resolver: ad2s1210: add register/fault support summary
staging: iio: resolver: ad2s1210: add label attribute support
staging: iio: resolver: ad2s1210: remove fault attribute
staging: iio: resolver: ad2s1210: refactor sample toggle
staging: iio: resolver: ad2s1210: clear faults after soft reset
staging: iio: resolver: ad2s1210: simplify code with guard(mutex)
iio: resolver: ad2s1210: move out of staging
iio: resolver: ad2s1210: remove DRV_NAME macro
iio: resolver: ad2s1210: remove of_match_ptr()

George Stark (1):
iio: adc: meson: improve error logging at probe stage

Javier Carrasco (2):
iio: si7005: Add device tree support
dt-bindings: trivial-devices: add silabs,si7005

Jinjie Ruan (10):
iio: adc: mt6577_auxadc: Use devm_clk_get_enabled() helper function
iio: adc: spear_adc: Use device managed function
iio: adc: spear_adc: Use dev_err_probe()
iio: adc: mt6577_auxadc: Simplify with dev_err_probe()
iio: adc: mt6577_auxadc: Simplify with device managed function
staging: iio: Use devm_clk_get_enabled() helper function
iio: frequency: adf4350: Use device managed functions and fix power down issue.
iio: adc: at91_adc: Use devm_request_irq() helper function
iio: adc: at91_adc: Use devm_clk_get_enabled() helper function
iio: adc: at91_adc: Simplify with dev_err_probe()

Jonathan Cameron (2):
Merge branch 'ib-iio-hid-sensors-v6.6-rc1' into togreg
Revert "dt-bindings: iio: magnetometer: asahi-kasei,ak8975: Drop deprecated enums"

Justin Stitt (1):
iio: adc: stm32-adc: Replace deprecated strncpy() with strscpy()

Lars-Peter Clausen (1):
iio: ad4310: Replace devm_clk_register() with devm_clk_hw_register()

Liam Beguin (2):
dt-bindings: iio: adc: add lltc,ltc2309 bindings
iio: adc: add ltc2309 support

Luca Ceresoli (1):
iio: accel: mxc4005: allow module autoloading via OF compatible

Marcus Folkesson (6):
dt-bindings: iio: adc: mcp3911: add support for the whole MCP39xx family
iio: adc: mcp3911: make use of dev_err_probe()
iio: adc: mcp3911: simplify usage of spi->dev
iio: adc: mcp3911: fix indentation
iio: adc: mcp3911: avoid ambiguity parameters in macros
iio: adc: mcp3911: add support for the whole MCP39xx family

Marek Vasut (2):
iio: adc: ti-ads1015: Add edge trigger support
dt-bindings: iio: adc: ti,ads1015: Document optional interrupt line

Marius Cristea (4):
dt-bindings: iio: adc: adding MCP3564 ADC
iio: adc: adding support for MCP3564 ADC
iio: adc: MCP3564: fix the static checker warning
iio: adc: MCP3564: fix warn: unsigned '__x' is never less than zero.

Martin Kepplinger (1):
dt-bindings: iio: imu: st,lsm6dsx: add mount-matrix property

Matti Vaittinen (7):
iio: improve doc for available_scan_mask
dt-bindings: Add ROHM BM1390 pressure sensor
iio: pressure: Support ROHM BU1390
MAINTAINERS: Add ROHM BM1390
dt-bindings: iio: Add KX132ACR-LBZ accelerometer
iio: kx022a: Support ROHM KX132ACR-LBZ
tools: iio: iio_generic_buffer ensure alignment

Mehdi Djait (7):
dt-bindings: iio: Add KX132-1211 accelerometer
iio: accel: kionix-kx022a: Remove blank lines
iio: accel: kionix-kx022a: Warn on failed matches and assume compatibility
iio: accel: kionix-kx022a: Add an i2c_device_id table
iio: accel: kionix-kx022a: Refactor driver and add chip_info structure
iio: accel: kionix-kx022a: Add a function to retrieve number of bytes in buffer
iio: accel: Add support for Kionix/ROHM KX132-1211 accelerometer

Michael Hennerich (1):
iio: amplifiers: hmc425a: Add Support HMC540S 4-bit Attenuator

Ramona Bolboaca (3):
iio: Add IIO_DELTA_ANGL channel type
iio: Add IIO_DELTA_VELOCITY channel type
iio: imu: adis16475.c: Add delta angle and delta velocity channels

Ramona Gradinariu (2):
iio: imu: adis16475: Add buffer padding after temp channel
drivers: imu: adis16475.c: Remove scan index from delta channels

Rob Herring (1):
iio: Use device_get_match_data()

Uwe Kleine-König (49):
iio: accel: hid-sensor-accel-3d: Convert to platform remove callback returning void
iio: adc: ab8500-gpadc: Convert to platform remove callback returning void
iio: adc: at91-sama5d2: Convert to platform remove callback returning void
iio: adc: at91: Convert to platform remove callback returning void
iio: adc: axp20x: Convert to platform remove callback returning void
iio: adc: bcm_iproc: Convert to platform remove callback returning void
iio: adc: dln2: Convert to platform remove callback returning void
iio: adc: ep93xx: Convert to platform remove callback returning void
iio: adc: exynos: Convert to platform remove callback returning void
iio: adc: fsl-imx25-gcq: Convert to platform remove callback returning void
iio: adc: hx711: Convert to platform remove callback returning void
iio: adc: imx8qxp: Convert to platform remove callback returning void
iio: adc: imx93: Convert to platform remove callback returning void
iio: adc: meson_saradc: Convert to platform remove callback returning void
iio: adc: mp2629: Convert to platform remove callback returning void
iio: adc: mxs-lradc: Convert to platform remove callback returning void
iio: adc: npcm: Convert to platform remove callback returning void
iio: adc: qcom-pm8xxx-xoadc: Convert to platform remove callback returning void
iio: adc: rcar-gyroadc: Convert to platform remove callback returning void
iio: adc: stm32-adc-core: Convert to platform remove callback returning void
iio: adc: stm32-adc: Convert to platform remove callback returning void
iio: adc: stm32-dfsdm-adc: Convert to platform remove callback returning void
iio: adc: stm32-dfsdm-core: Convert to platform remove callback returning void
iio: adc: sun4i-gpadc-iio: Convert to platform remove callback returning void
iio: adc: ti_am335x_adc: Convert to platform remove callback returning void
iio: adc: twl4030-madc: Convert to platform remove callback returning void
iio: adc: twl6030-gpadc: Convert to platform remove callback returning void
iio: adc: vf610_adc: Convert to platform remove callback returning void
iio: dac: dpot-dac: Convert to platform remove callback returning void
iio: dac: lpc18xx_dac: Convert to platform remove callback returning void
iio: dac: stm32-dac-core: Convert to platform remove callback returning void
iio: dac: stm32-dac: Convert to platform remove callback returning void
iio: dac: vf610: Convert to platform remove callback returning void
iio: gyro: hid-sensor-gyro-3d: Convert to platform remove callback returning void
iio: humidity: hid-sensor-humidity: Convert to platform remove callback returning void
iio: light: cm3605: Convert to platform remove callback returning void
iio: light: hid-sensor-als: Convert to platform remove callback returning void
iio: light: hid-sensor-prox: Convert to platform remove callback returning void
iio: light: lm3533-als: Convert to platform remove callback returning void
iio: magnetometer: hid-sensor-magn-3d: Convert to platform remove callback returning void
iio: orientation: hid-sensor-incl-3d: Convert to platform remove callback returning void
iio: orientation: hid-sensor-rotation: Convert to platform remove callback returning void
iio: position: hid-sensor-custom-intel-hinge: Convert to platform remove callback returning void
iio: pressure: hid-sensor: Convert to platform remove callback returning void
iio: proximity: cros_ec_mkbp: Convert to platform remove callback returning void
iio: proximity: srf04: Convert to platform remove callback returning void
iio: temperature: hid-sensor: Convert to platform remove callback returning void
iio: trigger: iio-trig-interrupt: Convert to platform remove callback returning void
iio: trigger: stm32-timer: Convert to platform remove callback returning void

William Breathitt Gray (1):
iio: addac: stx104: Add 8254 Counter/Timer support

Yue Haibing (1):
iio: Remove unused declarations

Zhang Shurong (1):
iio: adc: stm32-adc: harden against NULL pointer deref in stm32_adc_probe()

 Documentation/ABI/testing/sysfs-bus-iio            |   75 +
 .../ABI/testing/sysfs-bus-iio-adc-mcp3564          |   53 +
 .../ABI/testing/sysfs-bus-iio-resolver-ad2s1210    |   27 +
 .../bindings/iio/accel/kionix,kx022a.yaml          |   14 +-
 .../devicetree/bindings/iio/adc/lltc,ltc2497.yaml  |   20 +-
 .../bindings/iio/adc/microchip,mcp3564.yaml        |  205 +++
 .../bindings/iio/adc/microchip,mcp3911.yaml        |    6 +
 .../devicetree/bindings/iio/adc/ti,ads1015.yaml    |    3 +
 .../bindings/iio/adc/ti,twl6030-gpadc.yaml         |   43 +
 .../bindings/iio/amplifiers/adi,hmc425a.yaml       |   12 +-
 .../bindings/iio/imu/invensense,mpu6050.yaml       |    5 +
 .../devicetree/bindings/iio/imu/st,lsm6dsx.yaml    |    3 +
 .../bindings/iio/pressure/rohm,bm1390.yaml         |   52 +
 .../bindings/iio/resolver/adi,ad2s1210.yaml        |  177 +++
 .../devicetree/bindings/trivial-devices.yaml       |    2 +
 MAINTAINERS                                        |   19 +-
 .../amd-sfh-hid/hid_descriptor/amd_sfh_hid_desc.c  |    7 +
 .../amd-sfh-hid/hid_descriptor/amd_sfh_hid_desc.h  |    3 +
 .../hid_descriptor/amd_sfh_hid_report_desc.h       |   21 +
 drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_desc.c      |    9 +
 drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_interface.h |   15 +
 drivers/iio/accel/Kconfig                          |   10 +-
 drivers/iio/accel/adxl345.h                        |   21 +-
 drivers/iio/accel/adxl345_core.c                   |   47 +-
 drivers/iio/accel/adxl345_i2c.c                    |   20 +-
 drivers/iio/accel/adxl345_spi.c                    |   20 +-
 drivers/iio/accel/bma180.c                         |   27 +-
 drivers/iio/accel/fxls8962af.h                     |    1 -
 drivers/iio/accel/hid-sensor-accel-3d.c            |    6 +-
 drivers/iio/accel/kionix-kx022a-i2c.c              |   24 +-
 drivers/iio/accel/kionix-kx022a-spi.c              |   19 +-
 drivers/iio/accel/kionix-kx022a.c                  |  351 ++++-
 drivers/iio/accel/kionix-kx022a.h                  |  114 +-
 drivers/iio/accel/mma8452.c                        |   28 +-
 drivers/iio/accel/msa311.c                         |    2 +-
 drivers/iio/accel/mxc4005.c                        |    8 +
 drivers/iio/adc/Kconfig                            |   29 +-
 drivers/iio/adc/Makefile                           |    2 +
 drivers/iio/adc/ab8500-gpadc.c                     |    6 +-
 drivers/iio/adc/ad4130.c                           |   15 +-
 drivers/iio/adc/ad7192.c                           |  269 ++--
 drivers/iio/adc/at91-sama5d2_adc.c                 |    6 +-
 drivers/iio/adc/at91_adc.c                         |  114 +-
 drivers/iio/adc/axp20x_adc.c                       |    6 +-
 drivers/iio/adc/bcm_iproc_adc.c                    |    6 +-
 drivers/iio/adc/dln2-adc.c                         |    5 +-
 drivers/iio/adc/ep93xx_adc.c                       |    6 +-
 drivers/iio/adc/exynos_adc.c                       |    6 +-
 drivers/iio/adc/fsl-imx25-gcq.c                    |    6 +-
 drivers/iio/adc/hx711.c                            |    6 +-
 drivers/iio/adc/imx8qxp-adc.c                      |    6 +-
 drivers/iio/adc/imx93_adc.c                        |    6 +-
 drivers/iio/adc/ltc2309.c                          |  246 ++++
 drivers/iio/adc/ltc2497.c                          |    5 +-
 drivers/iio/adc/max1363.c                          |   87 +-
 drivers/iio/adc/mcp3564.c                          | 1513 +++++++++++++++++++
 drivers/iio/adc/mcp3911.c                          |  562 ++++++--
 drivers/iio/adc/meson_saradc.c                     |   22 +-
 drivers/iio/adc/mp2629_adc.c                       |    6 +-
 drivers/iio/adc/mt6577_auxadc.c                    |   72 +-
 drivers/iio/adc/mxs-lradc-adc.c                    |    6 +-
 drivers/iio/adc/npcm_adc.c                         |    6 +-
 drivers/iio/adc/palmas_gpadc.c                     |    2 +-
 drivers/iio/adc/qcom-pm8xxx-xoadc.c                |    6 +-
 drivers/iio/adc/rcar-gyroadc.c                     |    6 +-
 drivers/iio/adc/spear_adc.c                        |   64 +-
 drivers/iio/adc/stm32-adc-core.c                   |   12 +-
 drivers/iio/adc/stm32-adc.c                        |    8 +-
 drivers/iio/adc/stm32-dfsdm-adc.c                  |    6 +-
 drivers/iio/adc/stm32-dfsdm-core.c                 |    6 +-
 drivers/iio/adc/sun4i-gpadc-iio.c                  |    8 +-
 drivers/iio/adc/ti-adc081c.c                       |   12 +-
 drivers/iio/adc/ti-ads1015.c                       |    7 +-
 drivers/iio/adc/ti_am335x_adc.c                    |    6 +-
 drivers/iio/adc/twl4030-madc.c                     |    6 +-
 drivers/iio/adc/twl6030-gpadc.c                    |   16 +-
 drivers/iio/adc/vf610_adc.c                        |    6 +-
 drivers/iio/addac/Kconfig                          |    1 +
 drivers/iio/addac/ad74413r.c                       |   24 +-
 drivers/iio/addac/stx104.c                         |   61 +-
 drivers/iio/amplifiers/hmc425a.c                   |   17 +
 drivers/iio/chemical/atlas-ezo-sensor.c            |    6 +-
 drivers/iio/chemical/atlas-sensor.c                |   32 +-
 drivers/iio/chemical/sgp30.c                       |   24 +-
 drivers/iio/chemical/vz89x.c                       |   16 +-
 drivers/iio/dac/dpot-dac.c                         |    6 +-
 drivers/iio/dac/lpc18xx_dac.c                      |    6 +-
 drivers/iio/dac/mcp4725.c                          |   42 +-
 drivers/iio/dac/stm32-dac-core.c                   |   15 +-
 drivers/iio/dac/stm32-dac.c                        |    9 +-
 drivers/iio/dac/ti-dac5571.c                       |   48 +-
 drivers/iio/dac/vf610_dac.c                        |    6 +-
 drivers/iio/frequency/adf4350.c                    |   75 +-
 drivers/iio/gyro/hid-sensor-gyro-3d.c              |    6 +-
 drivers/iio/humidity/hid-sensor-humidity.c         |    6 +-
 drivers/iio/humidity/si7005.c                      |    7 +
 drivers/iio/iio_core.h                             |    3 -
 drivers/iio/imu/adis16475.c                        |  238 ++-
 drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c          |   13 +
 drivers/iio/imu/inv_mpu6050/inv_mpu_core.c         |    3 +
 drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h          |    2 +-
 drivers/iio/industrialio-core.c                    |    4 +
 drivers/iio/industrialio-event.c                   |   55 +
 drivers/iio/light/cm3605.c                         |    6 +-
 drivers/iio/light/hid-sensor-als.c                 |  136 +-
 drivers/iio/light/hid-sensor-prox.c                |    6 +-
 drivers/iio/light/lm3533-als.c                     |    6 +-
 drivers/iio/light/opt4001.c                        |    2 +-
 drivers/iio/magnetometer/ak8975.c                  |   97 +-
 drivers/iio/magnetometer/hid-sensor-magn-3d.c      |    6 +-
 drivers/iio/magnetometer/yamaha-yas530.c           |    4 +-
 drivers/iio/orientation/hid-sensor-incl-3d.c       |    6 +-
 drivers/iio/orientation/hid-sensor-rotation.c      |    6 +-
 .../iio/position/hid-sensor-custom-intel-hinge.c   |    6 +-
 drivers/iio/potentiometer/ad5110.c                 |   21 +-
 drivers/iio/potentiometer/ds1803.c                 |   13 +-
 drivers/iio/pressure/Kconfig                       |    9 +
 drivers/iio/pressure/Makefile                      |    1 +
 drivers/iio/pressure/hid-sensor-press.c            |    6 +-
 drivers/iio/pressure/ms5637.c                      |    6 +-
 drivers/iio/pressure/rohm-bm1390.c                 |  934 ++++++++++++
 drivers/iio/proximity/cros_ec_mkbp_proximity.c     |    6 +-
 drivers/iio/proximity/srf04.c                      |    6 +-
 drivers/iio/proximity/sx9310.c                     |   46 +-
 drivers/iio/resolver/Kconfig                       |   13 +
 drivers/iio/resolver/Makefile                      |    1 +
 drivers/iio/resolver/ad2s1210.c                    | 1519 ++++++++++++++++++++
 drivers/iio/temperature/hid-sensor-temperature.c   |    6 +-
 drivers/iio/temperature/mlx90614.c                 |    2 +-
 drivers/iio/temperature/tmp117.c                   |   94 +-
 drivers/iio/trigger/iio-trig-interrupt.c           |    6 +-
 drivers/iio/trigger/stm32-timer-trigger.c          |    6 +-
 drivers/staging/iio/Kconfig                        |    1 -
 drivers/staging/iio/Makefile                       |    1 -
 drivers/staging/iio/frequency/ad9832.c             |   15 +-
 drivers/staging/iio/frequency/ad9834.c             |   21 +-
 drivers/staging/iio/impedance-analyzer/ad5933.c    |   22 +-
 drivers/staging/iio/resolver/Kconfig               |   18 -
 drivers/staging/iio/resolver/Makefile              |    6 -
 drivers/staging/iio/resolver/ad2s1210.c            |  716 ---------
 include/linux/hid-sensor-ids.h                     |    4 +
 include/linux/iio/iio.h                            |   12 +-
 include/linux/iio/sw_device.h                      |    3 -
 include/linux/iio/sw_trigger.h                     |    3 -
 include/uapi/linux/iio/types.h                     |    4 +
 tools/iio/iio_event_monitor.c                      |    8 +
 tools/iio/iio_generic_buffer.c                     |   13 +-
 147 files changed, 7205 insertions(+), 2002 deletions(-)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-adc-mcp3564
 create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-resolver-ad2s1210
 create mode 100644 Documentation/devicetree/bindings/iio/adc/microchip,mcp3564.yaml
 create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,twl6030-gpadc.yaml
 create mode 100644 Documentation/devicetree/bindings/iio/pressure/rohm,bm1390.yaml
 create mode 100644 Documentation/devicetree/bindings/iio/resolver/adi,ad2s1210.yaml
 create mode 100644 drivers/iio/adc/ltc2309.c
 create mode 100644 drivers/iio/adc/mcp3564.c
 create mode 100644 drivers/iio/pressure/rohm-bm1390.c
 create mode 100644 drivers/iio/resolver/ad2s1210.c
 delete mode 100644 drivers/staging/iio/resolver/Kconfig
 delete mode 100644 drivers/staging/iio/resolver/Makefile
 delete mode 100644 drivers/staging/iio/resolver/ad2s1210.c