Skip to contentSkip to conversation

i3c/master/mipi-i3c-hci: Fix a kernel panic for accessing DAT_data.

PATCH Applied Billy Tsai 2 participants 2 messages Oct 23, 2023 – Nov 3, 2023 I3C

lore
Share & tools
lore

Billy Tsai

author
#0 lore raw

PATCH 1/1 i3c/master/mipi-i3c-hci: Fix a kernel panic for accessing DAT_data.

The i3c_master_bus_init function may attach the I2C devices before the I3C bus initialization. In this flow, the DAT `alloc_entry`` will be used before the DAT init. Additionally, if the i3c_master_bus_init fails, the DAT cleanup will execute before the device is detached, which will execue DAT free_entry function. The above scenario can cause the driver to use DAT_data when it is NULL.

---
 drivers/i3c/master/mipi-i3c-hci/dat_v1.c | 29 ++++++++++++++++--------
 1 file changed, 19 insertions(+), 10 deletions(-)
drivers/i3c/master/mipi-i3c-hci/dat_v1.c +19 -10
index 97bb49ff5b53..47b9b4d4ed3f 100644
@@ -64,15 +64,17 @@ static int hci_dat_v1_init(struct i3c_hci *hci)
 		return -EOPNOTSUPP;
 	}
 
-	/* use a bitmap for faster free slot search */
-	hci->DAT_data = bitmap_zalloc(hci->DAT_entries, GFP_KERNEL);
-	if (!hci->DAT_data)
-		return -ENOMEM;
-
-	/* clear them */
-	for (dat_idx = 0; dat_idx < hci->DAT_entries; dat_idx++) {
-		dat_w0_write(dat_idx, 0);
-		dat_w1_write(dat_idx, 0);
+	if (!hci->DAT_data) {
+		/* use a bitmap for faster free slot search */
+		hci->DAT_data = bitmap_zalloc(hci->DAT_entries, GFP_KERNEL);
+		if (!hci->DAT_data)
+			return -ENOMEM;
+
+		/* clear them */
+		for (dat_idx = 0; dat_idx < hci->DAT_entries; dat_idx++) {
+			dat_w0_write(dat_idx, 0);
+			dat_w1_write(dat_idx, 0);
+		}
 	}
 
 	return 0;
@@ -87,7 +89,13 @@ static void hci_dat_v1_cleanup(struct i3c_hci *hci)
 static int hci_dat_v1_alloc_entry(struct i3c_hci *hci)
 {
 	unsigned int dat_idx;
+	int ret;
 
+	if (!hci->DAT_data) {
+		ret = hci_dat_v1_init(hci);
+		if (ret)
+			return ret;
+	}
 	dat_idx = find_first_zero_bit(hci->DAT_data, hci->DAT_entries);
 	if (dat_idx >= hci->DAT_entries)
 		return -ENOENT;
@@ -103,7 +111,8 @@ static void hci_dat_v1_free_entry(struct i3c_hci *hci, unsigned int dat_idx)
 {
 	dat_w0_write(dat_idx, 0);
 	dat_w1_write(dat_idx, 0);
-	__clear_bit(dat_idx, hci->DAT_data);
+	if (hci->DAT_data)
+		__clear_bit(dat_idx, hci->DAT_data);
 }
 
 static void hci_dat_v1_set_dynamic_addr(struct i3c_hci *hci,
Signature · 1 line
2.25.1
maintainer Applied
#1 lore raw
Quoted 8 lines · Billy Tsai

The i3c_master_bus_init function may attach the I2C devices before the I3C bus initialization. In this flow, the DAT `alloc_entry`` will be used before the DAT init. Additionally, if the i3c_master_bus_init fails, the DAT cleanup will execute before the device is detached, which will execue DAT free_entry function. The above scenario can cause the driver to use DAT_data when it is NULL.

[...]

Applied, thanks!

[1/1] i3c/master/mipi-i3c-hci: Fix a kernel panic for accessing DAT_data.

      commit: b53e9758a31c683fc8615df930262192ed5f034b

Best regards,

Signature · 8 lines
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

-- 
linux-i3c mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-i3c