Skip to contentSkip to conversation

Revert "hwmon: (sch56xx-common) Add DMI override table"

PATCH New Guenter Roeck 1 participant 2 messages Oct 25, 2023 Hardware monitoring

lore
Share & tools
lore

Guenter Roeck

author maintainer
#0 lore raw

PATCH 1/2 Revert "hwmon: (sch56xx-common) Add DMI override table"

This reverts commit fd2d53c367ae9983c2100ac733a834e0c79d7537.

As reported by Ian Nartowicz, this and the preceding patch result in a failure to load the driver on Celsius W280. While the alternative would be to add the board to the DMI override table, it is quite likely that other systems are also affected. Revert the offending patches to avoid future problems.

Fixes fd2d53c367ae ("hwmon: (sch56xx-common) Add DMI override table")
Cc Armin Wolf <[email protected]>
---
 drivers/hwmon/sch56xx-common.c | 44 ++++++++--------------------------
 1 file changed, 10 insertions(+), 34 deletions(-)
drivers/hwmon/sch56xx-common.c +10 -34
index de3a0886c2f7..3ece53adabd6 100644
@@ -523,28 +523,6 @@ static int __init sch56xx_device_add(int address, const char *name)
 	return PTR_ERR_OR_ZERO(sch56xx_pdev);
 }
 
-static const struct dmi_system_id sch56xx_dmi_override_table[] __initconst = {
-	{
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS W380"),
-		},
-	},
-	{
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO P710"),
-		},
-	},
-	{
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO E9900"),
-		},
-	},
-	{ }
-};
-
 /* For autoloading only */
 static const struct dmi_system_id sch56xx_dmi_table[] __initconst = {
 	{
@@ -565,18 +543,16 @@ static int __init sch56xx_init(void)
 		if (!dmi_check_system(sch56xx_dmi_table))
 			return -ENODEV;
 
-		if (!dmi_check_system(sch56xx_dmi_override_table)) {
-			/*
-			 * Some machines like the Esprimo P720 and Esprimo C700 have
-			 * onboard devices named " Antiope"/" Theseus" instead of
-			 * "Antiope"/"Theseus", so we need to check for both.
-			 */
-			if (!dmi_find_device(DMI_DEV_TYPE_OTHER, "Antiope", NULL) &&
-			    !dmi_find_device(DMI_DEV_TYPE_OTHER, " Antiope", NULL) &&
-			    !dmi_find_device(DMI_DEV_TYPE_OTHER, "Theseus", NULL) &&
-			    !dmi_find_device(DMI_DEV_TYPE_OTHER, " Theseus", NULL))
-				return -ENODEV;
-		}
+		/*
+		 * Some machines like the Esprimo P720 and Esprimo C700 have
+		 * onboard devices named " Antiope"/" Theseus" instead of
+		 * "Antiope"/"Theseus", so we need to check for both.
+		 */
+		if (!dmi_find_device(DMI_DEV_TYPE_OTHER, "Antiope", NULL) &&
+		    !dmi_find_device(DMI_DEV_TYPE_OTHER, " Antiope", NULL) &&
+		    !dmi_find_device(DMI_DEV_TYPE_OTHER, "Theseus", NULL) &&
+		    !dmi_find_device(DMI_DEV_TYPE_OTHER, " Theseus", NULL))
+			return -ENODEV;
 	}
 
 	/*
Signature · 1 line
2.39.2
author maintainer
#1 lore raw

PATCH 2/2 Revert "hwmon: (sch56xx-common) Add automatic module loading on supported devices"

This reverts commit 393935baa45e5ccb9603cf7f9f020ed1bc0915f7.

As reported by Ian Nartowicz, this and the next patch result in a failure to load the driver on Celsius W280. While the alternative would be to add the board to the DMI override table, it is quite likely that other systems are also affected. Revert the offending patches to avoid future problems.

Fixes 393935baa45e ("hwmon: (sch56xx-common) Add automatic module loading on supported devices")
Cc Armin Wolf <[email protected]>
---
 drivers/hwmon/sch56xx-common.c | 40 ++--------------------------------
 1 file changed, 2 insertions(+), 38 deletions(-)
drivers/hwmon/sch56xx-common.c +2 -38
index 3ece53adabd6..ac1f72580715 100644
@@ -7,10 +7,8 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/module.h>
-#include <linux/mod_devicetable.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/dmi.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/acpi.h>
@@ -21,10 +19,7 @@
 #include <linux/slab.h>
 #include "sch56xx-common.h"
 
-static bool ignore_dmi;
-module_param(ignore_dmi, bool, 0);
-MODULE_PARM_DESC(ignore_dmi, "Omit DMI check for supported devices (default=0)");
-
+/* Insmod parameters */
 static bool nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, bool, 0);
 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
@@ -523,42 +518,11 @@ static int __init sch56xx_device_add(int address, const char *name)
 	return PTR_ERR_OR_ZERO(sch56xx_pdev);
 }
 
-/* For autoloading only */
-static const struct dmi_system_id sch56xx_dmi_table[] __initconst = {
-	{
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
-		},
-	},
-	{ }
-};
-MODULE_DEVICE_TABLE(dmi, sch56xx_dmi_table);
-
 static int __init sch56xx_init(void)
 {
-	const char *name = NULL;
 	int address;
+	const char *name = NULL;
 
-	if (!ignore_dmi) {
-		if (!dmi_check_system(sch56xx_dmi_table))
-			return -ENODEV;
-
-		/*
-		 * Some machines like the Esprimo P720 and Esprimo C700 have
-		 * onboard devices named " Antiope"/" Theseus" instead of
-		 * "Antiope"/"Theseus", so we need to check for both.
-		 */
-		if (!dmi_find_device(DMI_DEV_TYPE_OTHER, "Antiope", NULL) &&
-		    !dmi_find_device(DMI_DEV_TYPE_OTHER, " Antiope", NULL) &&
-		    !dmi_find_device(DMI_DEV_TYPE_OTHER, "Theseus", NULL) &&
-		    !dmi_find_device(DMI_DEV_TYPE_OTHER, " Theseus", NULL))
-			return -ENODEV;
-	}
-
-	/*
-	 * Some devices like the Esprimo C700 have both onboard devices,
-	 * so we still have to check manually
-	 */
 	address = sch56xx_find(0x4e, &name);
 	if (address < 0)
 		address = sch56xx_find(0x2e, &name);
Signature · 1 line
2.39.2