ata changes for 6.7-rc1

Linus,

The following changes since commit 8a749fd1a8720d4619c91c8b6e7528c0a355c0aa:

Linux 6.6-rc4 (2023-10-01 14:15:13 -0700)

are available in the Git repository at:

ssh://[email protected]/pub/scm/linux/kernel/git/dlemoal/libata tags/ata-6.7-rc1

for you to fetch changes up to 0e533cba38011457b51f13b3b5afd33c693bfcca:

dt-bindings: ata: tegra: Disallow undefined properties (2023-10-18 08:07:30 +0900)

----------------------------------------------------------------
ATA changes for 6.7-rc1

- Modify the AHCI driver to print the link power management policy used on scan, to help with debugging issues (Niklas).

- Add support for the ASM2116 series adapters to the AHCI driver (Szuying).

- Prepare libata for the coming gcc and Clang __counted_by attribute (Kees).

- Following the recent estensive fixing of libata suspend/resume handling, several patches further cleanup and improve disk power state management (from me).

- Reduce the verbosity of some error messages for non-fatal temporary errors, e.g. slow response to device reset when scanning a port, and warning messages that are in fact normal, e.g. disabling a device on suspend or when removing it (from me).

- Cleanup DMA helper functions (from me).

- Fix sata_mv drive handling of potential errors durring probe (Ma).

- Cleanup the xgene and imx drivers using the functions of_device_get_match_data() and device_get_match_data() (Rob).

- Improve the tegra driver device tree (Rob).

----------------------------------------------------------------
Damien Le Moal (14):
scsi: Remove scsi device no_start_on_resume flag
ata: libata-scsi: Cleanup ata_scsi_start_stop_xlat()
ata: libata-core: Synchronize ata_port_detach() with hotplug
ata: libata-core: Detach a port devices on shutdown
ata: libata-core: Remove ata_port_suspend_async()
ata: libata-core: Remove ata_port_resume_async()
ata: libata-core: Do not poweroff runtime suspended ports
ata: libata-core: Do not resume runtime suspended ports
ata: libata-sata: Improve ata_sas_slave_configure()
ata: libata-eh: Improve reset error messages
ata: libata-eh: Reduce "disable device" message verbosity
ata: libata: Cleanup inline DMA helper functions
ata: libata-eh: Spinup disk on resume after revalidation
ata: libata-core: Improve ata_dev_power_set_active()

Kees Cook (1):
ata: libata: Annotate struct ata_cpr_log with __counted_by

Ma Ke (1):
ata: sata_mv: aspeed: fix value check in mv_platform_probe()

Mika Westerberg (1):
ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list

Niklas Cassel (1):
ata: ahci: print the lpm policy on boot

Rob Herring (3):
ata: xgene: Use of_device_get_match_data()
ata: imx: Use device_get_match_data()
dt-bindings: ata: tegra: Disallow undefined properties

Szuying Chen (1):
ata: ahci: add identifiers for ASM2116 series adapters

 .../devicetree/bindings/ata/nvidia,tegra-ahci.yaml |   2 +-
 drivers/ata/ahci.c                                 |   6 +
 drivers/ata/ahci_imx.c                             |  10 +-
 drivers/ata/ahci_xgene.c                           |  11 +-
 drivers/ata/libahci.c                              |   2 +-
 drivers/ata/libata-core.c                          | 185 +++++++++++++--------
 drivers/ata/libata-eh.c                            |  54 +++---
 drivers/ata/libata-sata.c                          |   5 +-
 drivers/ata/libata-scsi.c                          |  53 +-----
 drivers/ata/libata-sff.c                           |  10 +-
 drivers/ata/libata.h                               |   2 +
 drivers/ata/pata_cs5520.c                          |   2 +-
 drivers/ata/sata_mv.c                              |   9 +-
 drivers/scsi/sd.c                                  |   9 +-
 include/linux/libata.h                             |  25 +--
 include/scsi/scsi_device.h                         |   1 -
 16 files changed, 201 insertions(+), 185 deletions(-)