MIPS: qemu-malta: use 320 MHz input clock for CP0 clocksource
PATCH 1/1 MIPS: qemu-malta: use 320 MHz input clock for CP0 clocksource
Modern qemu uses 24Kf CPU at 320 MHz for malta board. By default arch/mips/lib/csrc-r4k.c clocksource driver relies on CPU running at 200 MHz and CP0 timer runs at the half of CPU clock that is 100 MHz.
As a result the sleep 15 command runs for only 9 seconds on qemu-malta.
Setting CPU clock to 320 MHz in the qemu-malta.dts file fixes the problem.
See these qemu commits for details:
eea1f5bac6f hw/mips/malta: Set CPU frequency to 320 MHz a7519f2b39b mips: malta/boston: replace cpu_model with cpu_type
--- arch/mips/Kconfig | 3 +++ arch/mips/dts/qemu-malta.dts | 20 ++++++++++++++++++++ 2 files changed, 23 insertions(+)
arch/mips/Kconfig +3 -0
@@ -79,6 +79,9 @@ config MACH_MIPS_MALTA select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_LITTLE_ENDIAN select HAS_DEBUG_LL + select COMMON_CLK + select COMMON_CLK_OF_PROVIDER + select CLKDEV_LOOKUP select GPIOLIB select HW_HAS_PCI select HAVE_PBL_IMAGE
arch/mips/dts/qemu-malta.dts +20 -0
@@ -19,6 +19,26 @@ memory@0 { reg = <0x00000000 0x10000000>; }; + clocks { + ref_clk: ref_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <320000000>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "mips,mips24Kf"; + clocks = <&ref_clk>; + reg = <0>; + }; + }; + uart0: serial@180003f8 { compatible = "ns16550a"; reg = <0x180003f8 0x08>;
Signature · 1 line
2.39.0
Sascha Hauer
AppliedQuoted 12 lines · Antony Pavlov
Modern qemu uses 24Kf CPU at 320 MHz for malta board. By default
arch/mips/lib/csrc-r4k.cclocksource driver relies on CPU running at 200 MHz and CP0 timer runs at the half of CPU clock that is 100 MHz.
As a result thesleep 15command runs for only 9 seconds on qemu-malta.Setting CPU clock to 320 MHz in the
qemu-malta.dtsfile fixes the problem.See these qemu commits for details:
Quoted 8 lines
eea1f5bac6fhw/mips/malta: Set CPU frequency to 320 MHza7519f2b39bmips: malta/boston: replacecpu_modelwithcpu_typeSigned-off-by Antony Pavlov <[email protected]>--- arch/mips/Kconfig | 3 +++ arch/mips/dts/qemu-malta.dts | 20 ++++++++++++++++++++ 2 files changed, 23 insertions(+)
Applied to master, thanks
Sascha
Quoted 50 lines
arch/mips/Kconfig +3
-0@@ -79,6 +79,9 @@ config MACH_MIPS_MALTA select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_LITTLE_ENDIAN select HAS_DEBUG_LL + select COMMON_CLK + select COMMON_CLK_OF_PROVIDER + select CLKDEV_LOOKUP select GPIOLIB select HW_HAS_PCI select HAVE_PBL_IMAGEarch/mips/dts/qemu-malta.dts +20
-0@@ -19,6 +19,26 @@ memory@0 { reg = <0x00000000 0x10000000>; }; + clocks { + ref_clk: ref_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <320000000>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "mips,mips24Kf"; + clocks = <&ref_clk>; + reg = <0>; + }; + }; + uart0: serial@180003f8 { compatible = "ns16550a"; reg = <0x180003f8 0x08>;Signature · 1 line
2.39.0
Signature · 4 lines
Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |