Skip to contentSkip to conversation

arm64: dts: qcom: ipq8074: Add QUP4 SPI node

PATCH Applied Robert Marko 2 participants 2 messages Nov 23, 2023 – Dec 8, 2023

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm64: dts: qcom: ipq8074: Add QUP4 SPI node

Add node to support the QUP4 SPI controller inside of IPQ8074. Some devices use this bus to communicate to a Bluetooth controller.

---
 arch/arm64/boot/dts/qcom/ipq8074.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
arch/arm64/boot/dts/qcom/ipq8074.dtsi +14 -0
index d8e8a5cded64..1b9e50edc892 100644
@@ -744,6 +744,20 @@ blsp1_i2c3: i2c@78b7000 {
 			status = "disabled";
 		};
 
+		blsp1_spi4: spi@78b8000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x78b8000 0x600>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 18>, <&blsp_dma 19>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
 		blsp1_i2c5: i2c@78b9000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			#address-cells = <1>;
Signature · 1 line
2.42.0
maintainer Applied
#1 lore raw
Quoted 4 lines · Robert Marko

Add node to support the QUP4 SPI controller inside of IPQ8074. Some devices use this bus to communicate to a Bluetooth controller.

Applied, thanks!

[1/1] arm64: dts: qcom: ipq8074: Add QUP4 SPI node

      commit: 6a25e70214fde6dcf900271c819c8d7fe7b9a4b0

Best regards,

Signature · 1 line
Bjorn Andersson <[email protected]>