Skip to contentSkip to conversation

FAILED: patch "[PATCH] mmc: block: Be sure to wait while busy in CQE error recovery" failed to apply to 5.10-stable tree

PATCH In review [email protected] 3 participants 3 messages Dec 3, 2023 – Dec 11, 2023

Subsystems (2)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x c616696a902987352426fdaeec1b0b3240949e6b
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2023120358-baking-anymore-b0c7@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..

Possible dependencies:

c616696a9029 ("mmc: block: Be sure to wait while busy in CQE error recovery")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From c616696a902987352426fdaeec1b0b3240949e6b Mon Sep 17 00:00:00 2001
From: Adrian Hunter <[email protected]>
Date: Fri, 3 Nov 2023 10:47:17 +0200
Subject: [PATCH] mmc: block: Be sure to wait while busy in CQE error recovery

STOP command does not guarantee to wait while busy, but subsequent command MMC_CMDQ_TASK_MGMT to discard the queue will fail if the card is busy, so be sure to wait by employing mmc_poll_for_busy().

drivers/mmc/core/core.c +2 -0
index 3d3e0ca52614..befde2bd26d3 100644
@@ -553,6 +553,8 @@ int mmc_cqe_recovery(struct mmc_host *host)
 	cmd.busy_timeout = MMC_CQE_RECOVERY_TIMEOUT;
 	mmc_wait_for_cmd(host, &cmd, 0);
 
+	mmc_poll_for_busy(host->card, MMC_CQE_RECOVERY_TIMEOUT, true, MMC_BUSY_IO);
+
 	memset(&cmd, 0, sizeof(cmd));
 	cmd.opcode       = MMC_CMDQ_TASK_MGMT;
 	cmd.arg          = 1; /* Discard entire queue */
#1 lore raw

PATCH 1/1 mmc: block: Be sure to wait while busy in CQE error recovery

STOP command does not guarantee to wait while busy, but subsequent command MMC_CMDQ_TASK_MGMT to discard the queue will fail if the card is busy, so be sure to wait by employing mmc_poll_for_busy().

Backport to 5.10: Add mmc_busy_cmd MMC_BUSY_IO

Fixes 72a5af554df8 ("mmc: core: Add support for handling CQE requests")
(cherry picked from commit c616696a902987352426fdaeec1b0b3240949e6b)
---
 drivers/mmc/core/core.c    | 2 ++
 drivers/mmc/core/mmc_ops.c | 3 ++-
 drivers/mmc/core/mmc_ops.h | 1 +
 3 files changed, 5 insertions(+), 1 deletion(-)
drivers/mmc/core/core.c +2 -0
index fdeaaae08060..d5ca59bd1c99 100644
@@ -553,6 +553,8 @@ int mmc_cqe_recovery(struct mmc_host *host)
 	cmd.busy_timeout = MMC_CQE_RECOVERY_TIMEOUT;
 	mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
 
+	mmc_poll_for_busy(host->card, MMC_CQE_RECOVERY_TIMEOUT, MMC_BUSY_IO);
+
 	memset(&cmd, 0, sizeof(cmd));
 	cmd.opcode       = MMC_CMDQ_TASK_MGMT;
 	cmd.arg          = 1; /* Discard entire queue */
drivers/mmc/core/mmc_ops.c +2 -1
index ebad70e4481a..b6bb7f7faee2 100644
@@ -452,7 +452,7 @@ static int mmc_busy_status(struct mmc_card *card, bool retry_crc_err,
 	u32 status = 0;
 	int err;
 
-	if (host->ops->card_busy) {
+	if (busy_cmd != MMC_BUSY_IO && host->ops->card_busy) {
 		*busy = host->ops->card_busy(host);
 		return 0;
 	}
@@ -473,6 +473,7 @@ static int mmc_busy_status(struct mmc_card *card, bool retry_crc_err,
 		err = R1_STATUS(status) ? -EIO : 0;
 		break;
 	case MMC_BUSY_HPI:
+	case MMC_BUSY_IO:
 		break;
 	default:
 		err = -EINVAL;
drivers/mmc/core/mmc_ops.h +1 -0
index 632009260e51..e3cbb1ddc31c 100644
@@ -14,6 +14,7 @@ enum mmc_busy_cmd {
 	MMC_BUSY_CMD6,
 	MMC_BUSY_ERASE,
 	MMC_BUSY_HPI,
+	MMC_BUSY_IO,
 };
 
 struct mmc_host;
Signature · 1 line
2.34.1
#2 lore raw

Re: [PATCH 5.10] mmc: block: Be sure to wait while busy in CQE error recovery

Quoted 16 lines · Adrian Hunter

STOP command does not guarantee to wait while busy, but subsequent command MMC_CMDQ_TASK_MGMT to discard the queue will fail if the card is busy, so be sure to wait by employing mmc_poll_for_busy().

Backport to 5.10: Add mmc_busy_cmd MMC_BUSY_IO

Fixes 72a5af554df8 ("mmc: core: Add support for handling CQE requests")
(cherry picked from commit c616696a902987352426fdaeec1b0b3240949e6b)
Quoted 5 lines
---
 drivers/mmc/core/core.c    | 2 ++
 drivers/mmc/core/mmc_ops.c | 3 ++-
 drivers/mmc/core/mmc_ops.h | 1 +
 3 files changed, 5 insertions(+), 1 deletion(-)

Now queued up, thanks.

greg k-h