tests/kms: fix buckets and mega features
PATCH 1/1 tests/kms: fix buckets and mega features
Align mega features with internal tools.
--- tests/chamelium/kms_chamelium_audio.c | 13 +++--- tests/chamelium/kms_chamelium_edid.c | 31 +++++--------- tests/chamelium/kms_chamelium_frames.c | 22 +++++----- tests/chamelium/kms_chamelium_hpd.c | 57 +++++++++++--------------- tests/kms_atomic_transition.c | 2 +- tests/kms_bw.c | 2 +- tests/kms_dp_aux_dev.c | 4 +- tests/kms_feature_discovery.c | 4 +- tests/kms_hdmi_inject.c | 6 +-- tests/kms_panel_fitting.c | 2 +- tests/kms_scaling_modes.c | 2 +- tests/kms_vrr.c | 2 +- 12 files changed, 63 insertions(+), 84 deletions(-)
tests/chamelium/kms_chamelium_audio.c +5 -8
@@ -29,6 +29,7 @@* Category: Display * Description: Testing Audio with a Chamelium board * Driver requirement: i915, xe +* Mega feature: Display Audio * Test category: functionality test */
@@ -40,26 +41,22 @@* SUBTEST: dp-audio * Description: Playback various audio signals with various audio formats/rates, * capture them and check they are correct -* Functionality: chamelium, dp_audio -* Mega feature: Audio, DP +* Functionality: chamelium, dp, audio * * SUBTEST: hdmi-audio * Description: Playback various audio signals with various audio formats/rates, * capture them and check they are correct -* Functionality: chamelium, hdmi_audio -* Mega feature: Audio, HDMI +* Functionality: chamelium, hdmi, audio * * SUBTEST: dp-audio-edid * Description: Plug a connector with an EDID suitable for audio, check ALSA's * EDID-Like Data reports the correct audio parameters -* Functionality: chamelium, dp_audio -* Mega feature: Audio, DP +* Functionality: chamelium, dp, audio * * SUBTEST: hdmi-audio-edid * Description: Plug a connector with an EDID suitable for audio, check ALSA's * EDID-Like Data reports the correct audio parameters -* Functionality: chamelium, hdmi_audio -* Mega feature: Audio, HDMI +* Functionality: chamelium, hdmi, audio */ /* Playback parameters control the audio signal we synthesize and send */
tests/chamelium/kms_chamelium_edid.c +11 -20
@@ -29,6 +29,7 @@* Category: Display * Description: Testing EDID with a Chamelium board * Driver requirement: i915, xe +* Mega feature: General Display Features * Test category: functionality test */
@@ -53,39 +54,33 @@/** * SUBTEST: dp-edid-read * Description: Make sure the EDID exposed by KMS is the same as the screen's -* Functionality: chamelium, dp_edid -* Mega feature: DP +* Functionality: chamelium, dp, edid * * SUBTEST: hdmi-edid-read * Description: Make sure the EDID exposed by KMS is the same as the screen's -* Functionality: chamelium, hdmi_edid -* Mega feature: HDMI +* Functionality: chamelium, hdmi, edid * * SUBTEST: vga-edid-read * Description: Make sure the EDID exposed by KMS is the same as the screen's -* Functionality: chamelium, vga_edid -* Mega feature: VGA +* Functionality: chamelium, vga, edid * * SUBTEST: dp-edid-resolution-list * Description: Get an EDID with many modes of different configurations, set * them on the screen and check the screen resolution matches the * mode resolution. -* Functionality: chamelium, dp_edid -* Mega feature: DP +* Functionality: chamelium, dp, edid * * SUBTEST: dp-mode-timings * Description: For each mode of the IGT base EDID, perform a modeset and check * the mode detected by the Chamelium receiver matches the mode we * set -* Functionality: chamelium, dp_edid -* Mega feature: DP +* Functionality: chamelium, dp, edid * * SUBTEST: hdmi-mode-timings * Description: For each mode of the IGT base EDID, perform a modeset and check * the mode detected by the Chamelium receiver matches the mode we * set -* Functionality: chamelium, dp_edid -* Mega feature: DP +* Functionality: chamelium, dp, edid */ /**
@@ -93,15 +88,13 @@* Description: Stress test the DUT by testing multiple EDIDs, one right after * the other, and ensure their validity by check the real screen * resolution vs the advertised mode (%arg[1]) resolution. -* Functionality: chamelium, dp_edid -* Mega feature: DP +* Functionality: chamelium, dp, edid * * SUBTEST: hdmi-edid-stress-resolution-%s * Description: Stress test the DUT by testing multiple EDIDs, one right after * the other, and ensure their validity by check the real screen * resolution vs the advertised mode (%arg[1]) resolution. -* Functionality: chamelium, hdmi_edid -* Mega feature: HDMI +* Functionality: chamelium, hdmi, edid * * arg[1]: *
@@ -114,15 +107,13 @@* Description: Simulate a screen being unplugged and another screen being * plugged during suspend, check that a uevent is sent and * connector status is updated during %arg[1] -* Functionality: chamelium, dp_edid -* Mega feature: DP +* Functionality: chamelium, dp, edid * * SUBTEST: hdmi-edid-change-during-%s * Description: Simulate a screen being unplugged and another screen being * plugged during suspend, check that a uevent is sent and * connector status is updated during %arg[1] -* Functionality: chamelium, dp_edid -* Mega feature: DP +* Functionality: chamelium, dp, edid * * arg[1]: *
tests/chamelium/kms_chamelium_frames.c +11 -11
@@ -29,7 +29,7 @@* Category: Display * Description: Tests requiring a Chamelium board * Driver requirement: i915, xe -* Functionality: chamelium, frame_integrity +* Mega feature: General Display Features * Test category: functionality test */
@@ -41,17 +41,17 @@* SUBTEST: dp-crc-fast * Description: Pick the first mode of the IGT base EDID, display and capture * a few frames, then check captured frames are correct -* Mega feature: DP +* Functionality: chamelium, dp, frame_integrity * * SUBTEST: hdmi-crc-fast * Description: Pick the first mode of the IGT base EDID, display and capture * a few frames, then check captured frames are correct -* Mega feature: HDMI +* Functionality: chamelium, hdmi, frame_integrity * * SUBTEST: hdmi-%s-formats * Description: Pick the first mode of the IGT base EDID, display and capture a * few frames, then check captured frames are correct -* Mega feature: HDMI +* Functionality: chamelium, hdmi, frame_integrity * * arg[1]: *
@@ -63,17 +63,17 @@* SUBTEST: vga-frame-dump * Description: For each mode of the IGT base EDID, display and capture a few * frames, then check captured frames are correct -* Mega feature: VGA +* Functionality: chamelium, vga, frame_integrity * * SUBTEST: dp-crc-%s * Description: For each mode of the IGT base EDID, display and capture a %arg[1] * frame(s), then check captured frame(s) are correct -* Mega feature: DP +* Functionality: chamelium, dp, frame_integrity * * SUBTEST: hdmi-crc-%s * Description: For each mode of the IGT base EDID, display and capture a %arg[1] * frame(s), then check captured frame(s) are correct -* Mega feature: HDMI +* Functionality: chamelium, hdmi, frame_integrity * * arg[1]: *
@@ -86,23 +86,23 @@* Description: For each mode of the IGT base EDID, display and capture a few * frames, then download the captured frames and compare them * bit-by-bit to the sent ones -* Mega feature: DP +* Functionality: chamelium, dp, frame_integrity * * SUBTEST: hdmi-frame-dump * Description: For each mode of the IGT base EDID, display and capture a few * frames, then download the captured frames and compare them * bit-by-bit to the sent ones -* Mega feature: HDMI +* Functionality: chamelium, hdmi, frame_integrity * * SUBTEST: hdmi-aspect-ratio * Description: Pick a mode with a picture aspect-ratio, capture AVI InfoFrames * and check they include the relevant fields -* Mega feature: HDMI +* Functionality: chamelium, hdmi, frame_integrity * * SUBTEST: hdmi-%s-planes-random * Description: Setup a few overlay planes with random parameters, capture the * frame and check it matches the expected output -* Mega feature: HDMI +* Functionality: chamelium, hdmi, frame_integrity * * arg[1]: *
tests/chamelium/kms_chamelium_hpd.c +24 -33
171 lines not on this page · raw message
tests/kms_atomic_transition.c +1 -1
@@ -59,7 +59,7 @@/** * SUBTEST: plane-all-modeset-%s * Description: Modeset test for all plane combinations %arg[1] -* Mega feature: eDP +* Functionality: plane, watermark, edp * * arg[1]: *
tests/kms_bw.c +1 -1
@@ -26,7 +26,7 @@* Description: BW test with different resolutions * Driver requirement: i915, xe * Functionality: kms_core -* Mega feature: General Display Features +* Mega feature: Display Latency/Bandwidth * Test category: functionality test */
tests/kms_dp_aux_dev.c +2 -2
@@ -42,8 +42,8 @@* SUBTEST: * Description: Test that /dev/drm_dp_aux reads work * Driver requirement: i915, xe -* Functionality: dp_aux -* Mega feature: DP +* Functionality: dp_aux, edp, dp +* Mega feature: General Display Features * Test category: functionality test */
tests/kms_feature_discovery.c +2 -2
@@ -57,12 +57,12 @@* * SUBTEST: psr1 * Description: Make sure that we have eDP panel with PSR1 support. -* Functionality: feature_discovery, psr1, eDP_core +* Functionality: feature_discovery, psr1, edp * Mega feature: PSR * * SUBTEST: psr2 * Description: Make sure that we have eDP panel with PSR2 support. -* Functionality: feature_discovery, psr2, eDP_core +* Functionality: feature_discovery, psr2, edp * Mega feature: PSR * * SUBTEST: dp-mst
tests/kms_hdmi_inject.c +3 -3
@@ -29,7 +29,7 @@* by forcing a HDMI connector with a known EDID and checking that * the metadata exposed to user space matches. * Driver requirement: i915, xe -* Mega feature: HDMI +* Mega feature: General Display Features * Test category: functionality test */
@@ -46,12 +46,12 @@* SUBTEST: inject-4k * Description: Make sure that 4K modes exposed by DRM match the forced EDID and * modesetting using it succeed. -* Functionality: force_connector, hdmi_edid +* Functionality: force_connector, hdmi, edid * * SUBTEST: inject-audio * Description: Make sure that audio information exposed by ALSA match the forced * EDID. -* Functionality: hdmi_audio, force_connector +* Functionality: force_connector, hdmi, audio */ #define HDISPLAY_4K 3840
tests/kms_panel_fitting.c +1 -1
@@ -27,7 +27,7 @@* Category: Display * Description: Test display panel fitting * Driver requirement: i915, xe -* Functionality: eDP_core, panel_fitting, scaling +* Functionality: edp, panel_fitting, scaling * Mega feature: General Display Features * Test category: functionality test */
tests/kms_scaling_modes.c +1 -1
@@ -29,7 +29,7 @@* Category: Display * Description: Test display scaling modes * Driver requirement: i915, xe -* Functionality: eDP_core, plane, scaling +* Functionality: edp, plane, scaling * Mega feature: General Display Features * Test category: functionality test */
tests/kms_vrr.c +1 -1
@@ -26,7 +26,7 @@* Description: Test to validate diffent features of VRR * Driver requirement: i915, xe * Functionality: adaptive_sync -* Mega feature: VRR +* Mega feature: Adaptive Sync * Test category: functionality test */
Signature · 1 line
2.25.1
Quoted 3 lines · Swati Sharma
Align mega features with internal tools.
Signed-off-by Swati Sharma <[email protected]>
Quoted 540 lines
--- tests/chamelium/kms_chamelium_audio.c | 13 +++--- tests/chamelium/kms_chamelium_edid.c | 31 +++++--------- tests/chamelium/kms_chamelium_frames.c | 22 +++++----- tests/chamelium/kms_chamelium_hpd.c | 57 +++++++++++--------------- tests/kms_atomic_transition.c | 2 +- tests/kms_bw.c | 2 +- tests/kms_dp_aux_dev.c | 4 +- tests/kms_feature_discovery.c | 4 +- tests/kms_hdmi_inject.c | 6 +-- tests/kms_panel_fitting.c | 2 +- tests/kms_scaling_modes.c | 2 +- tests/kms_vrr.c | 2 +- 12 files changed, 63 insertions(+), 84 deletions(-)tests/chamelium/kms_chamelium_audio.c +5
-8@@ -29,6 +29,7 @@* Category: Display * Description: Testing Audio with a Chamelium board * Driver requirement: i915, xe +* Mega feature: Display Audio * Test category: functionality test */ @@ -40,26 +41,22 @@* SUBTEST: dp-audio * Description: Playback various audio signals with various audio formats/rates, * capture them and check they are correct -* Functionality: chamelium, dp_audio -* Mega feature: Audio, DP +* Functionality: chamelium, dp, audio * * SUBTEST: hdmi-audio * Description: Playback various audio signals with various audio formats/rates, * capture them and check they are correct -* Functionality: chamelium, hdmi_audio -* Mega feature: Audio, HDMI +* Functionality: chamelium, hdmi, audio * * SUBTEST: dp-audio-edid * Description: Plug a connector with an EDID suitable for audio, check ALSA's * EDID-Like Data reports the correct audio parameters -* Functionality: chamelium, dp_audio -* Mega feature: Audio, DP +* Functionality: chamelium, dp, audio * * SUBTEST: hdmi-audio-edid * Description: Plug a connector with an EDID suitable for audio, check ALSA's * EDID-Like Data reports the correct audio parameters -* Functionality: chamelium, hdmi_audio -* Mega feature: Audio, HDMI +* Functionality: chamelium, hdmi, audio */ /* Playback parameters control the audio signal we synthesize and send */ tests/chamelium/kms_chamelium_edid.c +11
-20@@ -29,6 +29,7 @@* Category: Display * Description: Testing EDID with a Chamelium board * Driver requirement: i915, xe +* Mega feature: General Display Features * Test category: functionality test */ @@ -53,39 +54,33 @@/** * SUBTEST: dp-edid-read * Description: Make sure the EDID exposed by KMS is the same as the screen's -* Functionality: chamelium, dp_edid -* Mega feature: DP +* Functionality: chamelium, dp, edid * * SUBTEST: hdmi-edid-read * Description: Make sure the EDID exposed by KMS is the same as the screen's -* Functionality: chamelium, hdmi_edid -* Mega feature: HDMI +* Functionality: chamelium, hdmi, edid * * SUBTEST: vga-edid-read * Description: Make sure the EDID exposed by KMS is the same as the screen's -* Functionality: chamelium, vga_edid -* Mega feature: VGA +* Functionality: chamelium, vga, edid * * SUBTEST: dp-edid-resolution-list * Description: Get an EDID with many modes of different configurations, set * them on the screen and check the screen resolution matches the * mode resolution. -* Functionality: chamelium, dp_edid -* Mega feature: DP +* Functionality: chamelium, dp, edid * * SUBTEST: dp-mode-timings * Description: For each mode of the IGT base EDID, perform a modeset and check * the mode detected by the Chamelium receiver matches the mode we * set -* Functionality: chamelium, dp_edid -* Mega feature: DP +* Functionality: chamelium, dp, edid * * SUBTEST: hdmi-mode-timings * Description: For each mode of the IGT base EDID, perform a modeset and check * the mode detected by the Chamelium receiver matches the mode we * set -* Functionality: chamelium, dp_edid -* Mega feature: DP +* Functionality: chamelium, dp, edid */ /** @@ -93,15 +88,13 @@* Description: Stress test the DUT by testing multiple EDIDs, one right after * the other, and ensure their validity by check the real screen * resolution vs the advertised mode (%arg[1]) resolution. -* Functionality: chamelium, dp_edid -* Mega feature: DP +* Functionality: chamelium, dp, edid * * SUBTEST: hdmi-edid-stress-resolution-%s * Description: Stress test the DUT by testing multiple EDIDs, one right after * the other, and ensure their validity by check the real screen * resolution vs the advertised mode (%arg[1]) resolution. -* Functionality: chamelium, hdmi_edid -* Mega feature: HDMI +* Functionality: chamelium, hdmi, edid * * arg[1]: * @@ -114,15 +107,13 @@* Description: Simulate a screen being unplugged and another screen being * plugged during suspend, check that a uevent is sent and * connector status is updated during %arg[1] -* Functionality: chamelium, dp_edid -* Mega feature: DP +* Functionality: chamelium, dp, edid * * SUBTEST: hdmi-edid-change-during-%s * Description: Simulate a screen being unplugged and another screen being * plugged during suspend, check that a uevent is sent and * connector status is updated during %arg[1] -* Functionality: chamelium, dp_edid -* Mega feature: DP +* Functionality: chamelium, dp, edid * * arg[1]: * tests/chamelium/kms_chamelium_frames.c +11
-11@@ -29,7 +29,7 @@* Category: Display * Description: Tests requiring a Chamelium board * Driver requirement: i915, xe -* Functionality: chamelium, frame_integrity +* Mega feature: General Display Features * Test category: functionality test */ @@ -41,17 +41,17 @@* SUBTEST: dp-crc-fast * Description: Pick the first mode of the IGT base EDID, display and capture * a few frames, then check captured frames are correct -* Mega feature: DP +* Functionality: chamelium, dp, frame_integrity * * SUBTEST: hdmi-crc-fast * Description: Pick the first mode of the IGT base EDID, display and capture * a few frames, then check captured frames are correct -* Mega feature: HDMI +* Functionality: chamelium, hdmi, frame_integrity * * SUBTEST: hdmi-%s-formats * Description: Pick the first mode of the IGT base EDID, display and capture a * few frames, then check captured frames are correct -* Mega feature: HDMI +* Functionality: chamelium, hdmi, frame_integrity * * arg[1]: * @@ -63,17 +63,17 @@* SUBTEST: vga-frame-dump * Description: For each mode of the IGT base EDID, display and capture a few * frames, then check captured frames are correct -* Mega feature: VGA +* Functionality: chamelium, vga, frame_integrity * * SUBTEST: dp-crc-%s * Description: For each mode of the IGT base EDID, display and capture a %arg[1] * frame(s), then check captured frame(s) are correct -* Mega feature: DP +* Functionality: chamelium, dp, frame_integrity * * SUBTEST: hdmi-crc-%s * Description: For each mode of the IGT base EDID, display and capture a %arg[1] * frame(s), then check captured frame(s) are correct -* Mega feature: HDMI +* Functionality: chamelium, hdmi, frame_integrity * * arg[1]: * @@ -86,23 +86,23 @@* Description: For each mode of the IGT base EDID, display and capture a few * frames, then download the captured frames and compare them * bit-by-bit to the sent ones -* Mega feature: DP +* Functionality: chamelium, dp, frame_integrity * * SUBTEST: hdmi-frame-dump * Description: For each mode of the IGT base EDID, display and capture a few * frames, then download the captured frames and compare them * bit-by-bit to the sent ones -* Mega feature: HDMI +* Functionality: chamelium, hdmi, frame_integrity * * SUBTEST: hdmi-aspect-ratio * Description: Pick a mode with a picture aspect-ratio, capture AVI InfoFrames * and check they include the relevant fields -* Mega feature: HDMI +* Functionality: chamelium, hdmi, frame_integrity * * SUBTEST: hdmi-%s-planes-random * Description: Setup a few overlay planes with random parameters, capture the * frame and check it matches the expected output -* Mega feature: HDMI +* Functionality: chamelium, hdmi, frame_integrity * * arg[1]: * tests/chamelium/kms_chamelium_hpd.c +24
-33@@ -29,7 +29,7 @@* Category: Display * Description: Testing HPD with a Chamelium board * Driver requirement: i915, xe -* Functionality: chamelium, hotplug +* Mega feature: General Display Features * Test category: functionality test */ @@ -39,47 +39,47 @@* SUBTEST: dp-hpd-fast * Description: Check that we get uevents and updated connector status on * hotplug and unplug -* Mega feature: DP +* Functionality: chamelium, hotplug, dp * * SUBTEST: hdmi-hpd-fast * Description: Check that we get uevents and updated connector status on * hotplug and unplug -* Mega feature: HDMI +* Functionality: chamelium, hotplug, hdmi * * SUBTEST: vga-hpd-fast * Description: Check that we get uevents and updated connector status on * hotplug and unplug -* Mega feature: VGA +* Functionality: chamelium, hotplug, vga * * SUBTEST: dp-hpd * Description: Check that we get uevents and updated connector status on * hotplug and unplug -* Mega feature: DP +* Functionality: chamelium, hotplug, dp * * SUBTEST: hdmi-hpd * Description: Check that we get uevents and updated connector status on * hotplug and unplug -* Mega feature: HDMI +* Functionality: chamelium, hotplug, hdmi * * SUBTEST: vga-hpd * Description: Check that we get uevents and updated connector status on * hotplug and unplug -* Mega feature: VGA +* Functionality: chamelium, hotplug, vga * * SUBTEST: dp-hpd-%s * Description: Check that we get uevents and updated connector status on * hotplug and unplug -* Mega feature: DP +* Functionality: chamelium, hotplug, dp * * SUBTEST: hdmi-hpd-%s * Description: Check that we get uevents and updated connector status on * hotplug and unplug -* Mega feature: HDMI +* Functionality: chamelium, hotplug, hdmi * * SUBTEST: vga-hpd-%s * Description: Check that we get uevents and updated connector status on * hotplug and unplug -* Mega feature: VGA +* Functionality: chamelium, hotplug, vga * * arg[1]: * @@ -91,93 +91,84 @@* SUBTEST: dp-hpd-for-each-pipe * Description: Check that we get uevents and updated connector status on * hotplug and unplug for each pipe with valid output -* Mega feature: DP +* Functionality: chamelium, hotplug, dp * * SUBTEST: hdmi-hpd-for-each-pipe * Description: Check that we get uevents and updated connector status on * hotplug and unplug for each pipe with valid output -* Mega feature: HDMI +* Functionality: chamelium, hotplug, hdmi * * SUBTEST: vga-hpd-for-each-pipe * Description: Check that we get uevents and updated connector status on * hotplug and unplug for each pipe with valid output -* Mega feature: VGA -* Test category: functionality test +* Functionality: chamelium, hotplug, vga * * SUBTEST: dp-hpd-after-hibernate * Description: Toggle HPD during Hibernation, check that uevents are sent and * connector status is updated -* Functionality: chamelium, hotplug, hibernation -* Mega feature: DP +* Functionality: chamelium, hotplug, dp, hibernation * * SUBTEST: hdmi-hpd-after-hibernate * Description: Toggle HPD during Hibernation, check that uevents are sent and * connector status is updated -* Functionality: chamelium, hotplug, hibernation -* Mega feature: HDMI +* Functionality: chamelium, hotplug, hdmi, hibernation * * SUBTEST: vga-hpd-after-hibernate * Description: Toggle HPD during Hibernation, check that uevents are sent and * connector status is updated -* Functionality: chamelium, hotplug, hibernation -* Mega feature: VGA +* Functionality: chamelium, hotplug, vga, hibernation * * SUBTEST: dp-hpd-after-suspend * Description: Toggle HPD during Suspend, check that uevents are sent and * connector status is updated -* Functionality: chamelium, hotplug, suspend -* Mega feature: DP +* Functionality: chamelium, hotplug, dp, suspend * * SUBTEST: hdmi-hpd-after-suspend * Description: Toggle HPD during Suspend, check that uevents are sent and * connector status is updated -* Functionality: chamelium, hotplug, suspend -* Mega feature: HDMI +* Functionality: chamelium, hotplug, hdmi, suspend * * SUBTEST: vga-hpd-after-suspend * Description: Toggle HPD during Suspend, check that uevents are sent and * connector status is updated -* Functionality: chamelium, hotplug, suspend -* Mega feature: VGA +* Functionality: chamelium, hotplug, vga, suspend * * SUBTEST: common-hpd-after-suspend * Description: Toggle HPD during suspend on all connectors, check that uevents * are sent and connector status is updated * Functionality: chamelium, hotplug, suspend -* Mega feature: General Display Features * * SUBTEST: common-hpd-after-hibernate * Description: Toggle HPD during suspend on all connectors, check that uevents * are sent and connector status is updated * Functionality: chamelium, hotplug, hibernation -* Mega feature: General Display Features * * SUBTEST: vga-hpd-without-ddc * Description: Disable DDC on a VGA connector, check we still get a uevent on * hotplug -* Mega feature: VGA +* Functionality: chamelium, hotplug, vga * * SUBTEST: dp-hpd-storm * Description: Trigger a series of hotplugs in a very small timeframe to * simulate abad cable, check the kernel falls back to polling * to avoid a hotplug storm -* Mega feature: DP +* Functionality: chamelium, hotplug, dp * * SUBTEST: hdmi-hpd-storm * Description: Trigger a series of hotplugs in a very small timeframe to * simulate abad cable, check the kernel falls back to polling * to avoid a hotplug storm -* Mega feature: HDMI +* Functionality: chamelium, hotplug, hdmi * * SUBTEST: dp-hpd-storm-disable * Description: Disable HPD storm detection, trigger a storm and check the * kernel doesn't detect one -* Mega feature: DP +* Functionality: chamelium, hotplug, dp * * SUBTEST: hdmi-hpd-storm-disable * Description: Disable HPD storm detection, trigger a storm and check the * kernel doesn't detect one -* Mega feature: HDMI +* Functionality: chamelium, hotplug, hdmi */ #define HPD_STORM_PULSE_INTERVAL_DP 100/* ms */ tests/kms_atomic_transition.c +1
-1@@ -59,7 +59,7 @@/** * SUBTEST: plane-all-modeset-%s * Description: Modeset test for all plane combinations %arg[1] -* Mega feature: eDP +* Functionality: plane, watermark, edp * * arg[1]: * tests/kms_bw.c +1
-1@@ -26,7 +26,7 @@* Description: BW test with different resolutions * Driver requirement: i915, xe * Functionality: kms_core -* Mega feature: General Display Features +* Mega feature: Display Latency/Bandwidth * Test category: functionality test */ tests/kms_dp_aux_dev.c +2
-2@@ -42,8 +42,8 @@* SUBTEST: * Description: Test that /dev/drm_dp_aux reads work * Driver requirement: i915, xe -* Functionality: dp_aux -* Mega feature: DP +* Functionality: dp_aux, edp, dp +* Mega feature: General Display Features * Test category: functionality test */ tests/kms_feature_discovery.c +2
-2@@ -57,12 +57,12 @@* * SUBTEST: psr1 * Description: Make sure that we have eDP panel with PSR1 support. -* Functionality: feature_discovery, psr1, eDP_core +* Functionality: feature_discovery, psr1, edp * Mega feature: PSR * * SUBTEST: psr2 * Description: Make sure that we have eDP panel with PSR2 support. -* Functionality: feature_discovery, psr2, eDP_core +* Functionality: feature_discovery, psr2, edp * Mega feature: PSR * * SUBTEST: dp-mst tests/kms_hdmi_inject.c +3
-3@@ -29,7 +29,7 @@* by forcing a HDMI connector with a known EDID and checking that * the metadata exposed to user space matches. * Driver requirement: i915, xe -* Mega feature: HDMI +* Mega feature: General Display Features * Test category: functionality test */ @@ -46,12 +46,12 @@* SUBTEST: inject-4k * Description: Make sure that 4K modes exposed by DRM match the forced EDID and * modesetting using it succeed. -* Functionality: force_connector, hdmi_edid +* Functionality: force_connector, hdmi, edid * * SUBTEST: inject-audio * Description: Make sure that audio information exposed by ALSA match the forced * EDID. -* Functionality: hdmi_audio, force_connector +* Functionality: force_connector, hdmi, audio */ #define HDISPLAY_4K 3840tests/kms_panel_fitting.c +1
-1@@ -27,7 +27,7 @@* Category: Display * Description: Test display panel fitting * Driver requirement: i915, xe -* Functionality: eDP_core, panel_fitting, scaling +* Functionality: edp, panel_fitting, scaling * Mega feature: General Display Features * Test category: functionality test */ tests/kms_scaling_modes.c +1
-1@@ -29,7 +29,7 @@* Category: Display * Description: Test display scaling modes * Driver requirement: i915, xe -* Functionality: eDP_core, plane, scaling +* Functionality: edp, plane, scaling * Mega feature: General Display Features * Test category: functionality test */ tests/kms_vrr.c +1
-1@@ -26,7 +26,7 @@* Description: Test to validate diffent features of VRR * Driver requirement: i915, xe * Functionality: adaptive_sync -* Mega feature: VRR +* Mega feature: Adaptive Sync * Test category: functionality test */
Patchwork
CI[igt-dev] ✓ CI.xeBAT: success for tests/kms: fix buckets and mega features
In reply to Swati Sharma== Series Details ==
== Series Details ==
Series: tests/kms: fix buckets and mega features
URL : https://patchwork.freedesktop.org/series/127270/
State : success
== Summary ==
CI Bug Log - changes from XEIGT_7614_BAT -> XEIGTPW_10328_BAT
====================================================
Summary
-------
**SUCCESS**
No regressions found.
Participating hosts (4 -> 4)
------------------------------
No changes in participating hosts
Known issues
------------
Here are the changes found in XEIGTPW_10328_BAT that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@kms_flip@basic-flip-vs-wf_vblank@a-dp3:
- bat-dg2-oem2: [PASS][1] -> [FAIL][2] ([Intel XE#480]) +1 other test fail
[1]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7614/bat-dg2-oem2/igt@kms_flip@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_10328/bat-dg2-oem2/igt@kms_flip@[email protected]
#### Possible fixes ####
* igt@kms_cursor_legacy@basic-flip-after-cursor-atomic:
- bat-adlp-7: [FAIL][3] ([i915#2346]) -> [PASS][4]
[3]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7614/bat-adlp-7/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_10328/bat-adlp-7/igt@[email protected]
* {igt@xe_create@create-execqueues-leak}:
- bat-atsm-2: [FAIL][5] ([Intel XE#524]) -> [PASS][6]
[5]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_7614/bat-atsm-2/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_10328/bat-atsm-2/igt@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[Intel XE#480]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/480
[Intel XE#524]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/524
[i915#2346]: https://gitlab.freedesktop.org/drm/intel/issues/2346
Build changes
-------------
* IGT: IGT_7614 -> IGTPW_10328
* Linux: xe-544-a8b405ffc0326c79abf737389d99c290648f381d -> xe-546-813b2afb0faa8df81cfb8fe25713bd4839484170
IGTPW_10328: 10328
IGT_7614: c7298ec108dc1c861c9a2593e973648ad9b420b4 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git
xe-544-a8b405ffc0326c79abf737389d99c290648f381d: a8b405ffc0326c79abf737389d99c290648f381d xe-546-813b2afb0faa8df81cfb8fe25713bd4839484170: 813b2afb0faa8df81cfb8fe25713bd4839484170
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_10328/index.html