sunxi: dts: arm64: update emac for Orange Pi Zero 3
Subsystems (2)
PATCH 1/1 sunxi: dts: arm64: update emac for Orange Pi Zero 3
From: Chukun Pan <[email protected]>
The current emac setting is not suitable for Orange Pi Zero 3, move it back to Orange Pi Zero 2 DT. Also update phy mode and delay values for emac on Orange Pi Zero 3.
With these changes, Ethernet now looks stable.
Fixes 95c3b0635ea4 ("sunxi: dts: arm64: update devicetree files from Linux-v6.6-rc6")
Signed-off-by Chukun Pan <[email protected]>
Reviewed-by Jernej Skrabec <[email protected]>
---
Hi,
this is a port of the corresponding Linux patch, that fixes Ethernet on that board. The patch is in Linux' sunxi/fixes-for-6.7 queue, awaiting a merge anytime soon.
For me this indeed fixes Ethernet operation in U-Boot on that board.
Cheers,
Andre
arch/arm/dts/sun50i-h616-orangepi-zero.dtsi | 3 --- arch/arm/dts/sun50i-h616-orangepi-zero2.dts | 3 +++ arch/arm/dts/sun50i-h618-orangepi-zero3.dts | 2 ++ 3 files changed, 5 insertions(+), 3 deletions(-)
arch/arm/dts/sun50i-h616-orangepi-zero.dtsi +0 -3
@@ -68,10 +68,7 @@ &emac0 { pinctrl-names = "default"; pinctrl-0 = <&ext_rgmii_pins>; - phy-mode = "rgmii"; phy-handle = <&ext_rgmii_phy>; - allwinner,rx-delay-ps = <3100>; - allwinner,tx-delay-ps = <700>; status = "okay"; };
arch/arm/dts/sun50i-h616-orangepi-zero2.dts +3 -0
@@ -13,6 +13,9 @@ }; &emac0 { + allwinner,rx-delay-ps = <3100>; + allwinner,tx-delay-ps = <700>; + phy-mode = "rgmii"; phy-supply = <®_dcdce>; };
arch/arm/dts/sun50i-h618-orangepi-zero3.dts +2 -0
@@ -13,6 +13,8 @@ }; &emac0 { + allwinner,tx-delay-ps = <700>; + phy-mode = "rgmii-rxid"; phy-supply = <®_dldo1>; };
Signature · 1 line
2.35.8