Skip to contentSkip to conversation

arm: socfpga: stratix10: SPI clock support

PATCH In review [email protected] 2 participants 2 messages Dec 7, 2023 – Jan 10, 2024

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm: socfpga: stratix10: SPI clock support

From: Dinesh Maniyam <[email protected]>

This patch is to add SPI clock support for stratix10. Get clock rate function always returning 0 because the DW-SPI driver get the rate from clock node in dts but Stratix10 does not support device tree clock node.To overcome this spi will get the clock_rate directly from spi clock controller override the weaker function.

---
 arch/arm/mach-socfpga/clock_manager_s10.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)
arch/arm/mach-socfpga/clock_manager_s10.c +16 -1
index 4b4f0749db..45300336d5 100644
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (C) 2016-2018 Intel Corporation <www.intel.com>
+ * Copyright (C) 2016-2023 Intel Corporation <www.intel.com>
  *
  */
 
@@ -399,6 +399,21 @@ unsigned int cm_get_l4_sys_free_clk_hz(void)
 	return cm_get_l3_main_clk_hz() / 4;
 }
 
+/*
+ * Override weak dw_spi_get_clk implementation in designware_spi.c driver
+ */
+
+int dw_spi_get_clk(struct udevice *bus, ulong *rate)
+{
+	*rate = cm_get_spi_controller_clk_hz();
+	if (!*rate) {
+		printf("SPI: clock rate is zero");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 void cm_print_clock_quick_summary(void)
 {
 	printf("MPU         %d kHz\n", (u32)(cm_get_mpu_clk_hz() / 1000));
Signature · 1 line
2.26.2
Reviewed-by on v1 1/1
#1 lore raw

Hi,

Quoted 62 lines

-----Original Message-----
From: Maniyam, Dinesh <[email protected]>
Sent: Thursday, December 7, 2023 3:46 PM
To: [email protected]
Cc: Marek <[email protected]>; Simon <[email protected]>; Chee, Tien Fong <[email protected]>; Hea, Kok Kiang <[email protected]>; Maniyam, Dinesh <[email protected]>; Ng, Boon Khai <[email protected]>; Yuslaimi, Alif Zakuan <[email protected]>; Chong, Teik Heng <[email protected]>; Zamri, Muhammad Hazim Izzat <[email protected]>; Lim, Jit Loon <[email protected]>; Tang, Sieu Mun <[email protected]>
Subject: [PATCH] arm: socfpga: stratix10: SPI clock support

From: Dinesh Maniyam <[email protected]>

This patch is to add SPI clock support for stratix10. Get clock rate function always returning 0 because the DW-SPI driver get the rate from clock node in dts but Stratix10 does not support device tree clock node.To overcome this spi will get the clock_rate directly from spi clock controller override the weaker function.

---
 arch/arm/mach-socfpga/clock_manager_s10.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)
arch/arm/mach- renamed from arch/arm/mach-socfpga/clock_manager_s10.c +0 -0

socfpga/clock_manager_s10.c
index 4b4f0749db..45300336d5 100644

arch/arm/mach-socfpga/clock_manager_s10.c +15 -2
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (C) 2016-2018 Intel Corporation <www.intel.com>
+ * Copyright (C) 2016-2023 Intel Corporation <www.intel.com>
  *
  */
 
@@ -399,6 +399,21 @@ unsigned int cm_get_l4_sys_free_clk_hz(void)
 	return cm_get_l3_main_clk_hz() / 4;
 }
 
+/*
+ * Override weak dw_spi_get_clk implementation in designware_spi.c
+driver  */
+
+int dw_spi_get_clk(struct udevice *bus, ulong *rate) {
+	*rate = cm_get_spi_controller_clk_hz();
+	if (!*rate) {
+		printf("SPI: clock rate is zero");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 void cm_print_clock_quick_summary(void)
 {
 	printf("MPU         %d kHz\n", (u32)(cm_get_mpu_clk_hz() / 1000));
--
Quoted 1 line

2.26.2

Regards
Tien Fong