Skip to contentSkip to conversation

lpfc: Update lpfc to revision 14.2.0.17

PATCH Applied Justin Tee 2 participants 7 messages Dec 7, 2023 – Dec 19, 2023

Subsystems (2)
lore
Share & tools
lore

Justin Tee

author
#0 lore raw

cover lpfc: Update lpfc to revision 14.2.0.17

Update lpfc to revision 14.2.0.17

This patch set contains bug fixes for the VMID feature.

The patches were cut against Martin's 6.8/scsi-queue tree.

Justin Tee (4):
lpfc: Change VMID driver load time parameters to read only
lpfc: Reinitialize an NPIV's VMID data structures after FDISC
lpfc: Move determination of vmid_flag after VMID reinitialization
completes
lpfc: Update lpfc version to 14.2.0.17

 drivers/scsi/lpfc/lpfc_attr.c    |  8 ++++----
 drivers/scsi/lpfc/lpfc_els.c     | 14 +++++++++++---
 drivers/scsi/lpfc/lpfc_version.h |  2 +-
 drivers/scsi/lpfc/lpfc_vmid.c    |  1 +
 4 files changed, 17 insertions(+), 8 deletions(-)
Signature · 1 line
2.38.0
author
#1 lore raw

PATCH 1/4 lpfc: Change VMID driver load time parameters to read only

VMID driver support is a load time configuration setting. Thus, change sysfs attributes to read only.

---
 drivers/scsi/lpfc/lpfc_attr.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/scsi/lpfc/lpfc_attr.c +4 -4
index 48c727a51193..d3a5d6ecdf7d 100644
@@ -5954,7 +5954,7 @@ LPFC_ATTR_R(enable_mi, 1, 0, 1, "Enable MI");
  *       4 - 255  = vmid support enabled for 4-255 VMs
  *       Value range is [4,255].
  */
-LPFC_ATTR_RW(max_vmid, LPFC_MIN_VMID, LPFC_MIN_VMID, LPFC_MAX_VMID,
+LPFC_ATTR_R(max_vmid, LPFC_MIN_VMID, LPFC_MIN_VMID, LPFC_MAX_VMID,
 	     "Maximum number of VMs supported");
 
 /*
@@ -5962,7 +5962,7 @@ LPFC_ATTR_RW(max_vmid, LPFC_MIN_VMID, LPFC_MIN_VMID, LPFC_MAX_VMID,
  *       0  = Timeout is disabled
  * Value range is [0,24].
  */
-LPFC_ATTR_RW(vmid_inactivity_timeout, 4, 0, 24,
+LPFC_ATTR_R(vmid_inactivity_timeout, 4, 0, 24,
 	     "Inactivity timeout in hours");
 
 /*
@@ -5971,7 +5971,7 @@ LPFC_ATTR_RW(vmid_inactivity_timeout, 4, 0, 24,
  *       1  = Support is enabled
  * Value range is [0,1].
  */
-LPFC_ATTR_RW(vmid_app_header, LPFC_VMID_APP_HEADER_DISABLE,
+LPFC_ATTR_R(vmid_app_header, LPFC_VMID_APP_HEADER_DISABLE,
 	     LPFC_VMID_APP_HEADER_DISABLE, LPFC_VMID_APP_HEADER_ENABLE,
 	     "Enable App Header VMID support");
 
@@ -5982,7 +5982,7 @@ LPFC_ATTR_RW(vmid_app_header, LPFC_VMID_APP_HEADER_DISABLE,
  *       2  = Allow all targets
  * Value range is [0,2].
  */
-LPFC_ATTR_RW(vmid_priority_tagging, LPFC_VMID_PRIO_TAG_DISABLE,
+LPFC_ATTR_R(vmid_priority_tagging, LPFC_VMID_PRIO_TAG_DISABLE,
 	     LPFC_VMID_PRIO_TAG_DISABLE,
 	     LPFC_VMID_PRIO_TAG_ALL_TARGETS,
 	     "Enable Priority Tagging VMID support");
Signature · 1 line
2.38.0
author
#2 lore raw

PATCH 2/4 lpfc: Reinitialize an NPIV's VMID data structures after FDISC

In reply to Justin Tee

After a follow up FDISC cmpl, an NPIV's VMID data structures are not updated.

Fix by calling lpfc_reinit_vmid and copying the physical port's vmid_flag to the NPIV's vmid_flag in the NPIV registration cmpl code path.

---
 drivers/scsi/lpfc/lpfc_els.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/scsi/lpfc/lpfc_els.c +8 -0
index f04326db8c19..3b7ed8bca01a 100644
@@ -11143,6 +11143,14 @@ lpfc_cmpl_reg_new_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	lpfc_nlp_put(ndlp);
 
 	mempool_free(pmb, phba->mbox_mem_pool);
+
+	/* reinitialize the VMID datastructure before returning.
+	 * this is specifically for vport
+	 */
+	if (lpfc_is_vmid_enabled(phba))
+		lpfc_reinit_vmid(vport);
+	vport->vmid_flag = vport->phba->pport->vmid_flag;
+
 	return;
 }
 
Signature · 1 line
2.38.0
author
#3 lore raw

PATCH 3/4 lpfc: Move determination of vmid_flag after VMID reinitialization completes

In reply to Justin Tee

If priority tagging is set in the service parameters of a FLOGI cmpl, then we update the vmid_flag. In the current logic, if a follow up FLOGI cmpl updates its service parameters such that priority tagging is no longer set, then the vmid_flag ends up keeping stale data.

Fix by ensuring we clear the vmid_flag member during lpfc_reinit_vmid, and check the priority tagging service parameter after reinitialization of the vmid data structures.

---
 drivers/scsi/lpfc/lpfc_els.c  | 6 +++---
 drivers/scsi/lpfc/lpfc_vmid.c | 1 +
 2 files changed, 4 insertions(+), 3 deletions(-)
drivers/scsi/lpfc/lpfc_els.c +3 -3
index 3b7ed8bca01a..4d723200690a 100644
@@ -1130,12 +1130,12 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 			 vport->port_state, vport->fc_flag,
 			 sp->cmn.priority_tagging, kref_read(&ndlp->kref));
 
-	if (sp->cmn.priority_tagging)
-		vport->phba->pport->vmid_flag |= (LPFC_VMID_ISSUE_QFPA |
-						  LPFC_VMID_TYPE_PRIO);
 	/* reinitialize the VMID datastructure before returning */
 	if (lpfc_is_vmid_enabled(phba))
 		lpfc_reinit_vmid(vport);
+	if (sp->cmn.priority_tagging)
+		vport->phba->pport->vmid_flag |= (LPFC_VMID_ISSUE_QFPA |
+						  LPFC_VMID_TYPE_PRIO);
 
 	/*
 	 * Address a timing race with dev_loss.  If dev_loss is active on
drivers/scsi/lpfc/lpfc_vmid.c +1 -0
index cf8ba840d0ea..773e02ae20c3 100644
@@ -321,5 +321,6 @@ lpfc_reinit_vmid(struct lpfc_vport *vport)
 	if (!hash_empty(vport->hash_table))
 		hash_for_each_safe(vport->hash_table, bucket, tmp, cur, hnode)
 			hash_del(&cur->hnode);
+	vport->vmid_flag = 0;
 	write_unlock(&vport->vmid_lock);
 }
Signature · 1 line
2.38.0
author
#4 lore raw

PATCH 4/4 lpfc: Update lpfc version to 14.2.0.17

In reply to Justin Tee

Update lpfc version to 14.2.0.17

---
 drivers/scsi/lpfc/lpfc_version.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/lpfc/lpfc_version.h +1 -1
index b7d39e2f19fc..aba1c1cee8c4 100644
@@ -20,7 +20,7 @@
  * included with this package.                                     *
  *******************************************************************/
 
-#define LPFC_DRIVER_VERSION "14.2.0.16"
+#define LPFC_DRIVER_VERSION "14.2.0.17"
 #define LPFC_DRIVER_NAME		"lpfc"
 
 /* Used for SLI 2/3 */
Signature · 1 line
2.38.0
#6 lore raw
In reply to Justin Tee
Quoted 6 lines · Justin Tee

Update lpfc to revision 14.2.0.17

This patch set contains bug fixes for the VMID feature.

The patches were cut against Martin's 6.8/scsi-queue tree.

Quoted 8 lines

Justin Tee (4):
lpfc: Change VMID driver load time parameters to read only
lpfc: Reinitialize an NPIV's VMID data structures after FDISC
lpfc: Move determination of vmid_flag after VMID reinitialization
completes
lpfc: Update lpfc version to 14.2.0.17

[...]

Applied to 6.8/scsi-queue, thanks!

[1/4] lpfc: Change VMID driver load time parameters to read only

      https://git.kernel.org/mkp/scsi/c/0653d40935f7
[2/4] lpfc: Reinitialize an NPIV's VMID data structures after FDISC
      https://git.kernel.org/mkp/scsi/c/8dc8eb89f4df
[3/4] lpfc: Move determination of vmid_flag after VMID reinitialization completes
      https://git.kernel.org/mkp/scsi/c/aba0fb0ef607
[4/4] lpfc: Update lpfc version to 14.2.0.17
      https://git.kernel.org/mkp/scsi/c/819952d58478
Signature · 1 line
Martin K. Petersen	Oracle Linux Engineering