Add Support for RG-ARC Panel
Subsystems (5)
cover Add Support for RG-ARC Panel
From: Chris Morgan <[email protected]>
Add support for the Anbernic RG-ARC display panel as used in the RG-ARC S and RG-ARC D handheld gaming devices from Anbernic.
Chris Morgan (3):
drm/panel: st7701: Fix AVCL calculation
dt-bindings: display: st7701: Add Anbernic RG-ARC panel drm/panel: st7701: Add Anbernic RG-ARC Panel Support
.../display/panel/sitronix,st7701.yaml | 1 + drivers/gpu/drm/panel/panel-sitronix-st7701.c | 138 +++++++++++++++++- 2 files changed, 138 insertions(+), 1 deletion(-)
Signature · 1 line
2.34.1
PATCH 1/3 drm/panel: st7701: Fix AVCL calculation
From: Chris Morgan <[email protected]>
The AVCL register, according to the datasheet, comes in increments of -0.2v between -4.4v (represented by 0x0) to -5.0v (represented by 0x3). The current calculation is done by adding the defined AVCL value in mV to -4400 and then dividing by 200 to get the register value. Unfortunately if I subtract -4400 from -4400 I get -8800, which divided by 200 gives me -44. If I instead subtract -4400 from -4400 I get 0, which divided by 200 gives me 0. Based on the datasheet this is the expected register value.
--- drivers/gpu/drm/panel/panel-sitronix-st7701.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/panel/panel-sitronix-st7701.c +1 -1
@@ -288,7 +288,7 @@ static void st7701_init_sequence(struct st7701 *st7701)FIELD_PREP (DSI_CMD2_BK1_PWRCTRL2_AVDD_MASK ,DIV_ROUND_CLOSEST (desc->avdd_mv -6200 ,200 )) |FIELD_PREP (DSI_CMD2_BK1_PWRCTRL2_AVCL_MASK , - DIV_ROUND_CLOSEST(-4400 + desc->avcl_mv, 200))); + DIV_ROUND_CLOSEST(-4400 - desc->avcl_mv, 200)));/* T2D = 0.2us * T2D[3:0] */ ST7701_DSI(st7701, DSI_CMD2_BK1_SPD1,
Signature · 1 line
2.34.1
Re: [PATCH 1/3] drm/panel: st7701: Fix AVCL calculation
Quoted 23 lines · Chris Morgan
From: Chris Morgan <[email protected]>
The AVCL register, according to the datasheet, comes in increments of -0.2v between -4.4v (represented by
0x0) to -5.0v (represented by0x3). The current calculation is done by adding the defined AVCL value in mV to -4400 and then dividing by 200 to get the register value. Unfortunately if I subtract -4400 from -4400 I get -8800, which divided by 200 gives me -44. If I instead subtract -4400 from -4400 I get 0, which divided by 200 gives me 0. Based on the datasheet this is the expected register value.Fixes 83b7a8e7e88e ("drm/panel/panel-sitronix-st7701: Parametrize voltage and timing")Signed-off-by Chris Morgan <[email protected]>--- drivers/gpu/drm/panel/panel-sitronix-st7701.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/gpu/drm/panel/panel-sitronix-st7701.c +0
-0
drivers/gpu/drm/panel/panel-sitronix-st7701.c static void st7701_init_sequence(struct st7701 *st7701) · line 294
Quoted 8 lines
drivers/gpu/drm/panel/panel-sitronix-st7701.c +1
-1@@ -288,7 +288,7 @@ static void st7701_init_sequence(struct st7701 *st7701)FIELD_PREP (DSI_CMD2_BK1_PWRCTRL2_AVDD_MASK ,DIV_ROUND_CLOSEST (desc->avdd_mv -6200 ,200 )) |FIELD_PREP (DSI_CMD2_BK1_PWRCTRL2_AVCL_MASK , - DIV_ROUND_CLOSEST(-4400 + desc->avcl_mv, 200))); + DIV_ROUND_CLOSEST(-4400 - desc->avcl_mv, 200)));/* T2D = 0.2us * T2D[3:0] */ ST7701_DSI(st7701, DSI_CMD2_BK1_SPD1,
Re: [PATCH 1/3] drm/panel: st7701: Fix AVCL calculation
In reply to Chris MorganQuoted 11 lines · Chris Morgan
From: Chris Morgan <[email protected]>
The AVCL register, according to the datasheet, comes in increments of -0.2v between -4.4v (represented by
0x0) to -5.0v (represented by0x3). The current calculation is done by adding the defined AVCL value in mV to -4400 and then dividing by 200 to get the register value. Unfortunately if I subtract -4400 from -4400 I get -8800, which divided by 200 gives me -44. If I instead subtract -4400 from -4400 I get 0, which divided by 200 gives me 0. Based on the datasheet this is the expected register value.
Quoted 3 lines
Fixes 83b7a8e7e88e ("drm/panel/panel-sitronix-st7701: Parametrize voltage and timing")Signed-off-by Chris Morgan <[email protected]>
Good catch!
Yours,
Linus Walleij
PATCH 2/3 dt-bindings: display: st7701: Add Anbernic RG-ARC panel
In reply to Chris MorganFrom: Chris Morgan <[email protected]>
The RG-ARC panel is a panel specific to the Anbernic RG-ARC. It is 4 inches in size (diagonally) with a resolution of 480x640.
--- .../devicetree/bindings/display/panel/sitronix,st7701.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml +1 -0
@@ -27,6 +27,7 @@ properties: compatible: items: - enum: + - anbernic,rg-arc-panel - densitron,dmt028vghmcmi-1a - elida,kd50t048a - techstar,ts8550b
Signature · 1 line
2.34.1
Re: [PATCH 2/3] dt-bindings: display: st7701: Add Anbernic RG-ARC panel
Quoted 7 lines · Chris Morgan
From: Chris Morgan <[email protected]>
The RG-ARC panel is a panel specific to the Anbernic RG-ARC. It is 4 inches in size (diagonally) with a resolution of 480x640.
Signed-off-by Chris Morgan <[email protected]>---
Best regards,
Krzysztof
Re: [PATCH 2/3] dt-bindings: display: st7701: Add Anbernic RG-ARC panel
In reply to Chris MorganQuoted 6 lines · Chris Morgan
From: Chris Morgan <[email protected]>
The RG-ARC panel is a panel specific to the Anbernic RG-ARC. It is 4 inches in size (diagonally) with a resolution of 480x640.
Signed-off-by Chris Morgan <[email protected]>
Yours,
Linus Walleij
PATCH 3/3 drm/panel: st7701: Add Anbernic RG-ARC Panel Support
In reply to Chris MorganFrom: Chris Morgan <[email protected]>
The Powkiddy RG-ARC is a series of 2 handheld devices, each with a 4 inch 480x640 display. Add support for the display.
--- drivers/gpu/drm/panel/panel-sitronix-st7701.c | 136 ++++++++++++++++++ 1 file changed, 136 insertions(+)
drivers/gpu/drm/panel/panel-sitronix-st7701.c +136 -0
@@ -423,6 +423,42 @@ static void kd50t048a_gip_sequence(struct st7701 *st7701) 0xFF, 0xFF, 0xFF, 0xFF, 0x10, 0x45, 0x67, 0x98, 0xBA); } +static void rg_arc_gip_sequence (struct st7701 *st7701) +{ +st7701_switch_cmd_bkx (st7701, true,3 ); +ST7701_DSI (st7701,0xEF ,0x08 ); +st7701_switch_cmd_bkx (st7701, true,0 ); +ST7701_DSI (st7701,0xC7 ,0x04 ); +ST7701_DSI (st7701,0xCC ,0x38 ); +st7701_switch_cmd_bkx (st7701, true,1 ); +ST7701_DSI (st7701,0xB9 ,0x10 ); +ST7701_DSI (st7701,0xBC ,0x03 ); +ST7701_DSI (st7701,0xC0 ,0x89 ); +ST7701_DSI (st7701,0xE0 ,0x00 ,0x00 ,0x02 ); +ST7701_DSI (st7701,0xE1 ,0x04 ,0x00 ,0x00 ,0x00 ,0x05 ,0x00 ,0x00 , +0x00 ,0x00 ,0x20 ,0x20 ); +ST7701_DSI (st7701,0xE2 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 , +0x00 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ); +ST7701_DSI (st7701,0xE3 ,0x00 ,0x00 ,0x33 ,0x00 ); +ST7701_DSI (st7701,0xE4 ,0x22 ,0x00 ); +ST7701_DSI (st7701,0xE5 ,0x04 ,0x5C ,0xA0 ,0xA0 ,0x06 ,0x5C ,0xA0 , +0xA0 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ); +ST7701_DSI (st7701,0xE6 ,0x00 ,0x00 ,0x33 ,0x00 ); +ST7701_DSI (st7701,0xE7 ,0x22 ,0x00 ); +ST7701_DSI (st7701,0xE8 ,0x05 ,0x5C ,0xA0 ,0xA0 ,0x07 ,0x5C ,0xA0 , +0xA0 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ); +ST7701_DSI (st7701,0xEB ,0x02 ,0x00 ,0x40 ,0x40 ,0x00 ,0x00 ,0x00 ); +ST7701_DSI (st7701,0xEC ,0x00 ,0x00 ); +ST7701_DSI (st7701,0xED ,0xFA ,0x45 ,0x0B ,0xFF ,0xFF ,0xFF ,0xFF , +0xFF ,0xFF ,0xFF ,0xFF ,0xFF ,0xFF ,0xB0 ,0x54 ,0xAF ); +ST7701_DSI (st7701,0xEF ,0x08 ,0x08 ,0x08 ,0x45 ,0x3F ,0x54 ); +st7701_switch_cmd_bkx (st7701, false,0 ); +ST7701_DSI (st7701,MIPI_DCS_SET_ADDRESS_MODE ,0x17 ); +ST7701_DSI (st7701,MIPI_DCS_SET_PIXEL_FORMAT ,0x77 ); +ST7701_DSI (st7701,MIPI_DCS_EXIT_SLEEP_MODE ,0x00 ); +msleep (120 ); +} +static int st7701_prepare (struct drm_panel *panel) {struct st7701 *st7701 =panel_to_st7701 (panel);
@@ -839,6 +875,105 @@ static const struct st7701_panel_desc kd50t048a_desc = { .gip_sequence = kd50t048a_gip_sequence, }; +static const struct drm_display_mode rg_arc_mode = { + .clock =25600 , + + .hdisplay =480 , + .hsync_start =480 +60 , + .hsync_end =480 +60 +42 , + .htotal =480 +60 +42 +60 , + + .vdisplay =640 , + .vsync_start =640 +10 , + .vsync_end =640 +10 +4 , + .vtotal =640 +10 +4 +16 , + + .width_mm =63 , + .height_mm =84 , + + .type =DRM_MODE_TYPE_DRIVER |DRM_MODE_TYPE_PREFERRED , +}; + +static const struct st7701_panel_desc rg_arc_desc = { + .mode = &rg_arc_mode, + .lanes =2 , + .format =MIPI_DSI_FMT_RGB888 , + .panel_sleep_delay =80 , + + .pv_gamma = { +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_AJ_MASK ,0x01 ) | +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC0_MASK ,0 ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_AJ_MASK ,0 ) | +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC4_MASK ,0x16 ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_AJ_MASK ,0 ) | +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC8_MASK ,0x1d ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC16_MASK ,0x0e ), + +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_AJ_MASK ,0 ) | +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC24_MASK ,0x12 ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC52_MASK ,0x06 ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC80_MASK ,0x0c ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC108_MASK ,0x0a ), + +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC147_MASK ,0x09 ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC175_MASK ,0x25 ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC203_MASK ,0x00 ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_AJ_MASK ,0 ) | +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC231_MASK ,0x03 ), + +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC239_MASK ,0x00 ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_AJ_MASK ,0 ) | +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC247_MASK ,0x3f ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_AJ_MASK ,0 ) | +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC251_MASK ,0x3f ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_AJ_MASK ,0 ) | +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC255_MASK ,0x1c ) + }, + .nv_gamma = { +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_AJ_MASK ,0x01 ) | +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC0_MASK ,0 ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_AJ_MASK ,0 ) | +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC4_MASK ,0x16 ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_AJ_MASK ,0 ) | +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC8_MASK ,0x1e ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC16_MASK ,0x0e ), + +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_AJ_MASK ,0 ) | +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC24_MASK ,0x11 ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC52_MASK ,0x06 ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC80_MASK ,0x0c ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC108_MASK ,0x08 ), + +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC147_MASK ,0x09 ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC175_MASK ,0x26 ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC203_MASK ,0x00 ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_AJ_MASK ,0 ) | +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC231_MASK ,0x15 ), + +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC239_MASK ,0x00 ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_AJ_MASK ,0 ) | +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC247_MASK ,0x3f ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_AJ_MASK ,0 ) | +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC251_MASK ,0x3f ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_AJ_MASK ,0 ) | +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC255_MASK ,0x1c ) + }, + .nlinv =0 , + .vop_uv =4500000 , + .vcom_uv =762500 , + .vgh_mv =15000 , + .vgl_mv =-9510 , + .avdd_mv =6600 , + .avcl_mv =-4400 , + .gamma_op_bias =OP_BIAS_MIDDLE , + .input_op_bias =OP_BIAS_MIN , + .output_op_bias =OP_BIAS_MIN , + .t2d_ns =1600 , + .t3d_ns =10400 , + .eot_en = true, + .gip_sequence = rg_arc_gip_sequence, +}; +static int st7701_dsi_probe (struct mipi_dsi_device *dsi) {const struct st7701_panel_desc *desc;
@@ -917,6 +1052,7 @@ static void st7701_dsi_remove(struct mipi_dsi_device *dsi) }static const struct of_device_id st7701_of_match[] = { + { .compatible ="anbernic,rg-arc-panel" , .data = &rg_arc_desc }, { .compatible ="densitron,dmt028vghmcmi-1a" , .data = &dmt028vghmcmi_1a_desc }, { .compatible ="elida,kd50t048a" , .data = &kd50t048a_desc }, { .compatible ="techstar,ts8550b" , .data = &ts8550b_desc },
Signature · 1 line
2.34.1
Re: [PATCH 3/3] drm/panel: st7701: Add Anbernic RG-ARC Panel Support
Quoted 164 lines · Chris Morgan
From: Chris Morgan <[email protected]>
The Powkiddy RG-ARC is a series of 2 handheld devices, each with a 4 inch 480x640 display. Add support for the display.
Signed-off-by Chris Morgan <[email protected]>--- drivers/gpu/drm/panel/panel-sitronix-st7701.c | 136 ++++++++++++++++++ 1 file changed, 136 insertions(+)drivers/gpu/drm/panel/panel-sitronix-st7701.c +135
-0@@ -423,6 +423,42 @@ static void kd50t048a_gip_sequence(struct st7701 *st7701) 0xFF, 0xFF, 0xFF, 0xFF, 0x10, 0x45, 0x67, 0x98, 0xBA); } +static void rg_arc_gip_sequence (struct st7701 *st7701) +{ +st7701_switch_cmd_bkx (st7701, true,3 ); +ST7701_DSI (st7701,0xEF ,0x08 ); +st7701_switch_cmd_bkx (st7701, true,0 ); +ST7701_DSI (st7701,0xC7 ,0x04 ); +ST7701_DSI (st7701,0xCC ,0x38 ); +st7701_switch_cmd_bkx (st7701, true,1 ); +ST7701_DSI (st7701,0xB9 ,0x10 ); +ST7701_DSI (st7701,0xBC ,0x03 ); +ST7701_DSI (st7701,0xC0 ,0x89 ); +ST7701_DSI (st7701,0xE0 ,0x00 ,0x00 ,0x02 ); +ST7701_DSI (st7701,0xE1 ,0x04 ,0x00 ,0x00 ,0x00 ,0x05 ,0x00 ,0x00 , +0x00 ,0x00 ,0x20 ,0x20 ); +ST7701_DSI (st7701,0xE2 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 , +0x00 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ); +ST7701_DSI (st7701,0xE3 ,0x00 ,0x00 ,0x33 ,0x00 ); +ST7701_DSI (st7701,0xE4 ,0x22 ,0x00 ); +ST7701_DSI (st7701,0xE5 ,0x04 ,0x5C ,0xA0 ,0xA0 ,0x06 ,0x5C ,0xA0 , +0xA0 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ); +ST7701_DSI (st7701,0xE6 ,0x00 ,0x00 ,0x33 ,0x00 ); +ST7701_DSI (st7701,0xE7 ,0x22 ,0x00 ); +ST7701_DSI (st7701,0xE8 ,0x05 ,0x5C ,0xA0 ,0xA0 ,0x07 ,0x5C ,0xA0 , +0xA0 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ); +ST7701_DSI (st7701,0xEB ,0x02 ,0x00 ,0x40 ,0x40 ,0x00 ,0x00 ,0x00 ); +ST7701_DSI (st7701,0xEC ,0x00 ,0x00 ); +ST7701_DSI (st7701,0xED ,0xFA ,0x45 ,0x0B ,0xFF ,0xFF ,0xFF ,0xFF , +0xFF ,0xFF ,0xFF ,0xFF ,0xFF ,0xFF ,0xB0 ,0x54 ,0xAF ); +ST7701_DSI (st7701,0xEF ,0x08 ,0x08 ,0x08 ,0x45 ,0x3F ,0x54 ); +st7701_switch_cmd_bkx (st7701, false,0 ); +ST7701_DSI (st7701,MIPI_DCS_SET_ADDRESS_MODE ,0x17 ); +ST7701_DSI (st7701,MIPI_DCS_SET_PIXEL_FORMAT ,0x77 ); +ST7701_DSI (st7701,MIPI_DCS_EXIT_SLEEP_MODE ,0x00 ); +msleep (120 ); +} +static int st7701_prepare (struct drm_panel *panel) {struct st7701 *st7701 =panel_to_st7701 (panel);@@ -839,6 +875,105 @@ static const struct st7701_panel_desc kd50t048a_desc = { .gip_sequence = kd50t048a_gip_sequence, }; +static const struct drm_display_mode rg_arc_mode = { + .clock =25600 , + + .hdisplay =480 , + .hsync_start =480 +60 , + .hsync_end =480 +60 +42 , + .htotal =480 +60 +42 +60 , + + .vdisplay =640 , + .vsync_start =640 +10 , + .vsync_end =640 +10 +4 , + .vtotal =640 +10 +4 +16 , + + .width_mm =63 , + .height_mm =84 , + + .type =DRM_MODE_TYPE_DRIVER |DRM_MODE_TYPE_PREFERRED , +}; + +static const struct st7701_panel_desc rg_arc_desc = { + .mode = &rg_arc_mode, + .lanes =2 , + .format =MIPI_DSI_FMT_RGB888 , + .panel_sleep_delay =80 , + + .pv_gamma = { +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_AJ_MASK ,0x01 ) | +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC0_MASK ,0 ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_AJ_MASK ,0 ) | +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC4_MASK ,0x16 ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_AJ_MASK ,0 ) | +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC8_MASK ,0x1d ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC16_MASK ,0x0e ), + +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_AJ_MASK ,0 ) | +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC24_MASK ,0x12 ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC52_MASK ,0x06 ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC80_MASK ,0x0c ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC108_MASK ,0x0a ), + +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC147_MASK ,0x09 ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC175_MASK ,0x25 ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC203_MASK ,0x00 ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_AJ_MASK ,0 ) | +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC231_MASK ,0x03 ), + +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC239_MASK ,0x00 ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_AJ_MASK ,0 ) | +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC247_MASK ,0x3f ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_AJ_MASK ,0 ) | +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC251_MASK ,0x3f ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_AJ_MASK ,0 ) | +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC255_MASK ,0x1c ) + }, + .nv_gamma = { +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_AJ_MASK ,0x01 ) | +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC0_MASK ,0 ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_AJ_MASK ,0 ) | +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC4_MASK ,0x16 ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_AJ_MASK ,0 ) | +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC8_MASK ,0x1e ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC16_MASK ,0x0e ), + +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_AJ_MASK ,0 ) | +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC24_MASK ,0x11 ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC52_MASK ,0x06 ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC80_MASK ,0x0c ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC108_MASK ,0x08 ), + +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC147_MASK ,0x09 ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC175_MASK ,0x26 ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC203_MASK ,0x00 ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_AJ_MASK ,0 ) | +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC231_MASK ,0x15 ), + +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC239_MASK ,0x00 ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_AJ_MASK ,0 ) | +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC247_MASK ,0x3f ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_AJ_MASK ,0 ) | +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC251_MASK ,0x3f ), +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_AJ_MASK ,0 ) | +CFIELD_PREP (DSI_CMD2_BK0_GAMCTRL_VC255_MASK ,0x1c ) + }, + .nlinv =0 , + .vop_uv =4500000 , + .vcom_uv =762500 , + .vgh_mv =15000 , + .vgl_mv =-9510 , + .avdd_mv =6600 , + .avcl_mv =-4400 , + .gamma_op_bias =OP_BIAS_MIDDLE , + .input_op_bias =OP_BIAS_MIN , + .output_op_bias =OP_BIAS_MIN , + .t2d_ns =1600 , + .t3d_ns =10400 , + .eot_en = true, + .gip_sequence = rg_arc_gip_sequence, +}; +static int st7701_dsi_probe (struct mipi_dsi_device *dsi) {const struct st7701_panel_desc *desc;
drivers/gpu/drm/panel/panel-sitronix-st7701.c static void st7701_dsi_remove(struct mipi_dsi_device *dsi) · line 1058
Quoted 7 lines
drivers/gpu/drm/panel/panel-sitronix-st7701.c +1
-0@@ -917,6 +1052,7 @@ static void st7701_dsi_remove(struct mipi_dsi_device *dsi) }static const struct of_device_id st7701_of_match[] = { + { .compatible ="anbernic,rg-arc-panel" , .data = &rg_arc_desc }, { .compatible ="densitron,dmt028vghmcmi-1a" , .data = &dmt028vghmcmi_1a_desc }, { .compatible ="elida,kd50t048a" , .data = &kd50t048a_desc }, { .compatible ="techstar,ts8550b" , .data = &ts8550b_desc },
Re: [PATCH 3/3] drm/panel: st7701: Add Anbernic RG-ARC Panel Support
In reply to Chris MorganQuoted 6 lines · Chris Morgan
From: Chris Morgan <[email protected]>
The Powkiddy RG-ARC is a series of 2 handheld devices, each with a 4 inch 480x640 display. Add support for the display.
Signed-off-by Chris Morgan <[email protected]>
Yours,
Linus Walleij
Hi,
Quoted 11 lines · Chris Morgan
From: Chris Morgan <[email protected]>
Add support for the Anbernic RG-ARC display panel as used in the RG-ARC S and RG-ARC D handheld gaming devices from Anbernic.
Chris Morgan (3):
drm/panel: st7701: Fix AVCL calculation
dt-bindings: display: st7701: Add Anbernic RG-ARC panel drm/panel: st7701: Add Anbernic RG-ARC Panel Support[...]
Thanks, Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next)
[1/3] drm/panel: st7701: Fix AVCL calculation
https://cgit.freedesktop.org/drm/drm-misc/commit/?id=799825aa87200ade1ba21db853d1c2ff720dcfe0 [2/3] dt-bindings: display: st7701: Add Anbernic RG-ARC panel https://cgit.freedesktop.org/drm/drm-misc/commit/?id=acbf9184a87d5d6868809baa3a6c7d0537d1f321 [3/3] drm/panel: st7701: Add Anbernic RG-ARC Panel Support https://cgit.freedesktop.org/drm/drm-misc/commit/?id=a7890252c1a314654862944cf4733e4333b76e25
Signature · 1 line
Neil