4.14.334-rc1 review

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Stefan Wahren <[email protected]>

[ Upstream commit f4e6064c97c050bd9904925ff7d53d0c9954fc7b ]

The qca_spi driver stop and restart the SPI kernel thread (via ndo_stop & ndo_open) in case of TX ring changes. This is a big issue because it allows userspace to prevent restart of the SPI kernel thread (via signals). A subsequent change of TX ring wrongly assume a valid spi_thread pointer which result in a crash.

So prevent this by stopping the network traffic handling and temporary park the SPI thread.

---
 drivers/net/ethernet/qualcomm/qca_debug.c |  9 ++++-----
 drivers/net/ethernet/qualcomm/qca_spi.c   | 12 ++++++++++++
 2 files changed, 16 insertions(+), 5 deletions(-)

index 92b6be9c44296..858c39cdae08a 100644
@@ -275,7 +275,6 @@ qcaspi_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ring)
 static int
 qcaspi_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ring)
 {
-	const struct net_device_ops *ops = dev->netdev_ops;
 	struct qcaspi *qca = netdev_priv(dev);
 
 	if ((ring->rx_pending) ||

@@ -283,14 +282,14 @@ qcaspi_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ring)
 	    (ring->rx_jumbo_pending))
 		return -EINVAL;
 
-	if (netif_running(dev))
-		ops->ndo_stop(dev);
+	if (qca->spi_thread)
+		kthread_park(qca->spi_thread);
 
 	qca->txr.count = max_t(u32, ring->tx_pending, TX_RING_MIN_LEN);
 	qca->txr.count = min_t(u16, qca->txr.count, TX_RING_MAX_LEN);
 
-	if (netif_running(dev))
-		ops->ndo_open(dev);
+	if (qca->spi_thread)
+		kthread_unpark(qca->spi_thread);
 
 	return 0;
 }

index 0c454eeb3bd8e..4142554dc29e3 100644
@@ -552,6 +552,18 @@ qcaspi_spi_thread(void *data)
 	netdev_info(qca->net_dev, "SPI thread created\n");
 	while (!kthread_should_stop()) {
 		set_current_state(TASK_INTERRUPTIBLE);
+		if (kthread_should_park()) {
+			netif_tx_disable(qca->net_dev);
+			netif_carrier_off(qca->net_dev);
+			qcaspi_flush_tx_ring(qca);
+			kthread_parkme();
+			if (qca->sync == QCASPI_SYNC_READY) {
+				netif_carrier_on(qca->net_dev);
+				netif_wake_queue(qca->net_dev);
+			}
+			continue;
+		}
+
 		if ((qca->intr_req == qca->intr_svc) &&
 		    !qca->txr.skb[qca->txr.head])
 			schedule();

2.43.0

This is the start of the stable review cycle for the 4.14.334 release. There are 26 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 20 Dec 2023 13:50:31 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.334-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.14.334-rc1

Naveen N Rao <[email protected]>
powerpc/ftrace: Fix stack teardown in ftrace_no_trace

Naveen N Rao <[email protected]>
powerpc/ftrace: Create a dummy stackframe to fix stack unwind

Steven Rostedt (Google) <[email protected]>
ring-buffer: Fix memory leak of free page

Florent Revest <[email protected]>
team: Fix use-after-free when an option instance allocation fails

Baokun Li <[email protected]>
ext4: prevent the normalized size from exceeding EXT_MAX_BLOCKS

Denis Benato <[email protected]>
HID: hid-asus: add const to read-only outgoing usb buffer

Lech Perczak <[email protected]>
net: usb: qmi_wwan: claim interface 4 for ZTE MF290

Linus Torvalds <[email protected]>
asm-generic: qspinlock: fix queued_spin_value_unlocked() implementation

Aoba K <[email protected]>
HID: multitouch: Add quirk for HONOR GLO-GXXX touchpad

Denis Benato <[email protected]>
HID: hid-asus: reset the backlight brightness level on resume

Andy Shevchenko <[email protected]>
platform/x86: intel_telemetry: Fix kernel doc descriptions

Coly Li <[email protected]>
bcache: add code comments for bch_btree_node_get() and __bch_btree_node_alloc()

Ming Lei <[email protected]>
blk-throttle: fix lockdep warning of "cgroup_mutex or RCU read lock required!"

Jens Axboe <[email protected]>
cred: switch to using atomic_long_t

Hyunwoo Kim <[email protected]>
appletalk: Fix Use-After-Free in atalk_ioctl

Nikolay Kuratov <[email protected]>
vsock/virtio: Fix unsigned integer wrap around in virtio_transport_has_space()

Yusong Gao <[email protected]>
sign-file: Fix incorrect return values check

Dong Chenchen <[email protected]>
net: Remove acked SYN flag from packet in the transmit queue correctly

Dinghao Liu <[email protected]>
qed: Fix a potential use-after-free in qed_cxt_tables_alloc

Hyunwoo Kim <[email protected]>
net/rose: Fix Use-After-Free in rose_ioctl

Hyunwoo Kim <[email protected]>
atm: Fix Use-After-Free in do_vcc_ioctl

Chengfeng Ye <[email protected]>
atm: solos-pci: Fix potential deadlock on &tx_queue_lock

Chengfeng Ye <[email protected]>
atm: solos-pci: Fix potential deadlock on &cli_queue_lock

Stefan Wahren <[email protected]>
qca_spi: Fix reset behavior

Stefan Wahren <[email protected]>
qca_debug: Fix ethtool -G iface tx behavior

Stefan Wahren <[email protected]>
qca_debug: Prevent crash on TX ring changes

-------------

Diffstat:

 Makefile                                       |  4 +-
 arch/powerpc/kernel/trace/ftrace_64_mprofile.S |  9 +++-
 block/blk-throttle.c                           |  2 +
 drivers/atm/solos-pci.c                        |  8 ++--
 drivers/hid/hid-asus.c                         | 25 ++++++++--
 drivers/hid/hid-multitouch.c                   |  5 ++
 drivers/md/bcache/btree.c                      |  7 +++
 drivers/net/ethernet/qlogic/qed/qed_cxt.c      |  1 +
 drivers/net/ethernet/qualcomm/qca_debug.c      | 17 +++----
 drivers/net/ethernet/qualcomm/qca_spi.c        | 20 +++++++-
 drivers/net/team/team.c                        |  4 +-
 drivers/net/usb/qmi_wwan.c                     |  1 +
 drivers/platform/x86/intel_telemetry_core.c    |  4 +-
 fs/ext4/mballoc.c                              |  4 ++
 include/asm-generic/qspinlock.h                |  2 +-
 include/linux/cred.h                           |  6 +--
 kernel/cred.c                                  | 66 +++++++++++++-------------
 kernel/trace/ring_buffer.c                     |  2 +
 net/appletalk/ddp.c                            |  9 ++--
 net/atm/ioctl.c                                |  7 ++-
 net/ipv4/tcp_output.c                          |  6 +++
 net/rose/af_rose.c                             |  4 +-
 net/vmw_vsock/virtio_transport_common.c        |  2 +-
 scripts/sign-file.c                            | 12 ++---
 24 files changed, 152 insertions(+), 75 deletions(-)

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yusong Gao <[email protected]>

[ Upstream commit 829649443e78d85db0cff0c37cadb28fbb1a5f6f ]

There are some wrong return values check in sign-file when call OpenSSL API. The ERR() check cond is wrong because of the program only check the return value is < 0 which ignored the return val is 0. For example:
1. CMS_final() return 1 for success or 0 for failure.
2. i2d_CMS_bio_stream() returns 1 for success or 0 for failure.
3. i2d_TYPEbio() return 1 for success and 0 for failure.
4. BIO_free() return 1 for success and 0 for failure.

---
 scripts/sign-file.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

index 7434e9ea926e2..12acc70e5a7a5 100644
@@ -322,7 +322,7 @@ int main(int argc, char **argv)
 				     CMS_NOSMIMECAP | use_keyid |
 				     use_signed_attrs),
 		    "CMS_add1_signer");
-		ERR(CMS_final(cms, bm, NULL, CMS_NOCERTS | CMS_BINARY) < 0,
+		ERR(CMS_final(cms, bm, NULL, CMS_NOCERTS | CMS_BINARY) != 1,
 		    "CMS_final");
 
 #else

@@ -341,10 +341,10 @@ int main(int argc, char **argv)
 			b = BIO_new_file(sig_file_name, "wb");
 			ERR(!b, "%s", sig_file_name);
 #ifndef USE_PKCS7
-			ERR(i2d_CMS_bio_stream(b, cms, NULL, 0) < 0,
+			ERR(i2d_CMS_bio_stream(b, cms, NULL, 0) != 1,
 			    "%s", sig_file_name);
 #else
-			ERR(i2d_PKCS7_bio(b, pkcs7) < 0,
+			ERR(i2d_PKCS7_bio(b, pkcs7) != 1,
 			    "%s", sig_file_name);
 #endif
 			BIO_free(b);

@@ -374,9 +374,9 @@ int main(int argc, char **argv)
 
 	if (!raw_sig) {
 #ifndef USE_PKCS7
-		ERR(i2d_CMS_bio_stream(bd, cms, NULL, 0) < 0, "%s", dest_name);
+		ERR(i2d_CMS_bio_stream(bd, cms, NULL, 0) != 1, "%s", dest_name);
 #else
-		ERR(i2d_PKCS7_bio(bd, pkcs7) < 0, "%s", dest_name);
+		ERR(i2d_PKCS7_bio(bd, pkcs7) != 1, "%s", dest_name);
 #endif
 	} else {
 		BIO *b;

@@ -396,7 +396,7 @@ int main(int argc, char **argv)
 	ERR(BIO_write(bd, &sig_info, sizeof(sig_info)) < 0, "%s", dest_name);
 	ERR(BIO_write(bd, magic_number, sizeof(magic_number) - 1) < 0, "%s", dest_name);
 
-	ERR(BIO_free(bd) < 0, "%s", dest_name);
+	ERR(BIO_free(bd) != 1, "%s", dest_name);
 
 	/* Finally, if we're signing in place, replace the original. */
 	if (replace_orig)

2.43.0

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Nikolay Kuratov <[email protected]>

[ Upstream commit 60316d7f10b17a7ebb1ead0642fee8710e1560e0 ]

We need to do signed arithmetic if we expect condition if (bytes < 0) to be possible

Found by Linux Verification Center (linuxtesting.org) with SVACE

---
 net/vmw_vsock/virtio_transport_common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 9b8f592897ec5..df09ac4e35056 100644
@@ -348,7 +348,7 @@ static s64 virtio_transport_has_space(struct vsock_sock *vsk)
 	struct virtio_vsock_sock *vvs = vsk->trans;
 	s64 bytes;
 
-	bytes = vvs->peer_buf_alloc - (vvs->tx_cnt - vvs->peer_fwd_cnt);
+	bytes = (s64)vvs->peer_buf_alloc - (vvs->tx_cnt - vvs->peer_fwd_cnt);
 	if (bytes < 0)
 		bytes = 0;
 

2.43.0

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hyunwoo Kim <[email protected]>

[ Upstream commit 189ff16722ee36ced4d2a2469d4ab65a8fee4198 ]

Because atalk_ioctl() accesses sk->sk_receive_queue without holding a sk->sk_receive_queue.lock, it can cause a race with atalk_recvmsg().
A use-after-free for skb occurs with the following flow.

```
atalk_ioctl() -> skb_peek()
atalk_recvmsg() -> skb_recv_datagram() -> skb_free_datagram()
```

Add sk->sk_receive_queue.lock to atalk_ioctl() to fix this issue.

---
 net/appletalk/ddp.c |    9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

@@ -1810,15 +1810,14 @@ static int atalk_ioctl(struct socket *so
 		break;
 	}
 	case TIOCINQ: {
-		/*
-		 * These two are safe on a single CPU system as only
-		 * user tasks fiddle here
-		 */
-		struct sk_buff *skb = skb_peek(&sk->sk_receive_queue);
+		struct sk_buff *skb;
 		long amount = 0;
 
+		spin_lock_irq(&sk->sk_receive_queue.lock);
+		skb = skb_peek(&sk->sk_receive_queue);
 		if (skb)
 			amount = skb->len - sizeof(struct ddpehdr);
+		spin_unlock_irq(&sk->sk_receive_queue.lock);
 		rc = put_user(amount, (int __user *)argp);
 		break;
 	}

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jens Axboe <[email protected]>

commit f8fa5d76925991976b3e7076f9d1052515ec1fca upstream.

There are multiple ways to grab references to credentials, and the only protection we have against overflowing it is the memory required to do so.

With memory sizes only moving in one direction, let's bump the reference count to 64-bit and move it outside the realm of feasibly overflowing.

---
 include/linux/cred.h |    6 ++--
 kernel/cred.c        |   66 +++++++++++++++++++++++++--------------------------
 2 files changed, 36 insertions(+), 36 deletions(-)

@@ -109,7 +109,7 @@ extern void groups_sort(struct group_inf
  * same context as task->real_cred.
  */
 struct cred {
-	atomic_t	usage;
+	atomic_long_t	usage;
 #ifdef CONFIG_DEBUG_CREDENTIALS
 	atomic_t	subscribers;	/* number of processes subscribed */
 	void		*put_addr;

@@ -226,7 +226,7 @@ static inline bool cap_ambient_invariant
  */
 static inline struct cred *get_new_cred(struct cred *cred)
 {
-	atomic_inc(&cred->usage);
+	atomic_long_inc(&cred->usage);
 	return cred;
 }
 

@@ -270,7 +270,7 @@ static inline void put_cred(const struct
 
 	if (cred) {
 		validate_creds(cred);
-		if (atomic_dec_and_test(&(cred)->usage))
+		if (atomic_long_dec_and_test(&(cred)->usage))
 			__put_cred(cred);
 	}
 }

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ming Lei <[email protected]>

[ Upstream commit 27b13e209ddca5979847a1b57890e0372c1edcee ]

Inside blkg_for_each_descendant_pre(), both css_for_each_descendant_pre() and blkg_lookup() requires RCU read lock, and either cgroup_assert_mutex_or_rcu_locked() or rcu_read_lock_held() is called.

Fix the warning by adding rcu read lock.

---
 block/blk-throttle.c | 2 ++
 1 file changed, 2 insertions(+)

index fcbbe2e45a2bb..e52a9632993a7 100644
@@ -1391,6 +1391,7 @@ static void tg_conf_updated(struct throtl_grp *tg, bool global)
 		   tg_bps_limit(tg, READ), tg_bps_limit(tg, WRITE),
 		   tg_iops_limit(tg, READ), tg_iops_limit(tg, WRITE));
 
+	rcu_read_lock();
 	/*
 	 * Update has_rules[] flags for the updated tg's subtree.  A tg is
 	 * considered to have rules if either the tg itself or any of its

@@ -1418,6 +1419,7 @@ static void tg_conf_updated(struct throtl_grp *tg, bool global)
 		this_tg->latency_target = max(this_tg->latency_target,
 				parent_tg->latency_target);
 	}
+	rcu_read_unlock();
 
 	/*
 	 * We're already holding queue_lock and know @tg is valid.  Let's

2.43.0

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Coly Li <[email protected]>

[ Upstream commit 31f5b956a197d4ec25c8a07cb3a2ab69d0c0b82f ]

This patch adds code comments to bch_btree_node_get() and __bch_btree_node_alloc() that NULL pointer will not be returned and it is unnecessary to check NULL pointer by the callers of these routines.

---
 drivers/md/bcache/btree.c | 7 +++++++
 1 file changed, 7 insertions(+)

index 37ac4e8462056..2a21bb28d9692 100644
@@ -972,6 +972,9 @@ static struct btree *mca_alloc(struct cache_set *c, struct btree_op *op,
  *
  * The btree node will have either a read or a write lock held, depending on
  * level and op->lock.
+ *
+ * Note: Only error code or btree pointer will be returned, it is unncessary
+ *       for callers to check NULL pointer.
  */
 struct btree *bch_btree_node_get(struct cache_set *c, struct btree_op *op,
 				 struct bkey *k, int level, bool write,

@@ -1070,6 +1073,10 @@ static void btree_node_free(struct btree *b)
 	mutex_unlock(&b->c->bucket_lock);
 }
 
+/*
+ * Only error code or btree pointer will be returned, it is unncessary for
+ * callers to check NULL pointer.
+ */
 struct btree *__bch_btree_node_alloc(struct cache_set *c, struct btree_op *op,
 				     int level, bool wait,
 				     struct btree *parent)

2.43.0

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andy Shevchenko <[email protected]>

[ Upstream commit a6584711e64d9d12ab79a450ec3628fd35e4f476 ]

LKP found issues with a kernel doc in the driver:

core.c:116: warning: Function parameter or member 'ioss_evtconfig' not described in 'telemetry_update_events' core.c:188: warning: Function parameter or member 'ioss_evtconfig' not described in 'telemetry_get_eventconfig'

It looks like it were copy'n'paste typos when these descriptions had been introduced. Fix the typos.

---
 drivers/platform/x86/intel_telemetry_core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index 0d4c3808a6d89..a0595fcd945ea 100644
@@ -111,7 +111,7 @@ static const struct telemetry_core_ops telm_defpltops = {
 /**
  * telemetry_update_events() - Update telemetry Configuration
  * @pss_evtconfig: PSS related config. No change if num_evts = 0.
- * @pss_evtconfig: IOSS related config. No change if num_evts = 0.
+ * @ioss_evtconfig: IOSS related config. No change if num_evts = 0.
  *
  * This API updates the IOSS & PSS Telemetry configuration. Old config
  * is overwritten. Call telemetry_reset_events when logging is over

@@ -185,7 +185,7 @@ EXPORT_SYMBOL_GPL(telemetry_reset_events);
 /**
  * telemetry_get_eventconfig() - Returns the pss and ioss events enabled
  * @pss_evtconfig: Pointer to PSS related configuration.
- * @pss_evtconfig: Pointer to IOSS related configuration.
+ * @ioss_evtconfig: Pointer to IOSS related configuration.
  * @pss_len:	   Number of u32 elements allocated for pss_evtconfig array
  * @ioss_len:	   Number of u32 elements allocated for ioss_evtconfig array
  *

2.43.0

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Denis Benato <[email protected]>

[ Upstream commit 546edbd26cff7ae990e480a59150e801a06f77b1 ]

Some devices managed by this driver automatically set brightness to 0 before entering a suspended state and reset it back to a default brightness level after the resume:
this has the effect of having the kernel report wrong brightness status after a sleep, and on some devices (like the Asus RC71L) that brightness is the intensity of LEDs directly facing the user.

Fix the above issue by setting back brightness to the level it had before entering a sleep state.

---
 drivers/hid/hid-asus.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

index 7cdbde2b114b3..52f65d0f44cae 100644
@@ -592,6 +592,24 @@ static int asus_start_multitouch(struct hid_device *hdev)
 	return 0;
 }
 
+static int __maybe_unused asus_resume(struct hid_device *hdev) {
+	struct asus_drvdata *drvdata = hid_get_drvdata(hdev);
+	int ret = 0;
+
+	if (drvdata->kbd_backlight) {
+		const u8 buf[] = { FEATURE_KBD_REPORT_ID, 0xba, 0xc5, 0xc4,
+				drvdata->kbd_backlight->cdev.brightness };
+		ret = asus_kbd_set_report(hdev, buf, sizeof(buf));
+		if (ret < 0) {
+			hid_err(hdev, "Asus failed to set keyboard backlight: %d\n", ret);
+			goto asus_resume_err;
+		}
+	}
+
+asus_resume_err:
+	return ret;
+}
+
 static int __maybe_unused asus_reset_resume(struct hid_device *hdev)
 {
 	struct asus_drvdata *drvdata = hid_get_drvdata(hdev);

@@ -768,6 +786,7 @@ static struct hid_driver asus_driver = {
 	.input_configured       = asus_input_configured,
 #ifdef CONFIG_PM
 	.reset_resume           = asus_reset_resume,
+	.resume					= asus_resume,
 #endif
 	.raw_event		= asus_raw_event
 };

2.43.0

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Aoba K <[email protected]>

[ Upstream commit 9ffccb691adb854e7b7f3ee57fbbda12ff70533f ]

Honor MagicBook 13 2023 has a touchpad which do not switch to the multitouch mode until the input mode feature is written by the host. The touchpad do report the input mode at touchpad(3), while itself working under mouse mode. As a workaround, it is possible to call MT_QUIRE_FORCE_GET_FEATURE to force set feature in mt_set_input_mode for such device.

The touchpad reports as BLTP7853, which cannot retrive any useful manufacture information on the internel by this string at present. As the serial number of the laptop is GLO-G52, while DMI info reports the laptop serial number as GLO-GXXX, this workaround should applied to all models which has the GLO-GXXX.

---
 drivers/hid/hid-multitouch.c | 5 +++++
 1 file changed, 5 insertions(+)

index 55b1023af31fa..2fa9013c90c82 100644
@@ -1602,6 +1602,11 @@ static const struct hid_device_id mt_devices[] = {
 		MT_USB_DEVICE(USB_VENDOR_ID_HANVON_ALT,
 			USB_DEVICE_ID_HANVON_ALT_MULTITOUCH) },
 
+	/* HONOR GLO-GXXX panel */
+	{ .driver_data = MT_CLS_VTL,
+		HID_DEVICE(BUS_I2C, HID_GROUP_MULTITOUCH_WIN_8,
+			0x347d, 0x7853) },
+
 	/* Ilitek dual touch panel */
 	{  .driver_data = MT_CLS_NSMU,
 		MT_USB_DEVICE(USB_VENDOR_ID_ILITEK,

2.43.0

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Linus Torvalds <[email protected]>

[ Upstream commit 125b0bb95dd6bec81b806b997a4ccb026eeecf8f ]

We really don't want to do atomic_read() or anything like that, since we already have the value, not the lock. The whole point of this is that we've loaded the lock from memory, and we want to check whether the value we loaded was a locked one or not.

The main use of this is the lockref code, which loads both the lock and the reference count in one atomic operation, and then works on that combined value. With the atomic_read(), the compiler would pointlessly spill the value to the stack, in order to then be able to read it back "atomically".

This is the qspinlock version of commit c6f4a9002252 ("asm-generic:
ticket-lock: Optimize arch_spin_value_unlocked()") which fixed this same bug for ticket locks.

---
 include/asm-generic/qspinlock.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 66260777d6447..c133ed3183150 100644
@@ -49,7 +49,7 @@ static __always_inline int queued_spin_is_locked(struct qspinlock *lock)
  */
 static __always_inline int queued_spin_value_unlocked(struct qspinlock lock)
 {
-	return !atomic_read(&lock.val);
+	return !lock.val.counter;
 }
 
 /**

2.43.0

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Stefan Wahren <[email protected]>

[ Upstream commit 96a7e861d9e04d07febd3011c30cd84cd141d81f ]

After calling ethtool -g it was not possible to adjust the TX ring size again:

  # ethtool -g eth1
  Ring parameters for eth1:
  Pre-set maximums:
  RX:		4
  RX Mini:	n/a
  RX Jumbo:	n/a
  TX:		10
  Current hardware settings:
  RX:		4
  RX Mini:	n/a
  RX Jumbo:	n/a
  TX:		10
  # ethtool -G eth1 tx 8
  netlink error: Invalid argument

The reason for this is that the readonly setting rx_pending get initialized and after that the range check in qcaspi_set_ringparam() fails regardless of the provided parameter. So fix this by accepting the exposed RX defaults. Instead of adding another magic number better use a new define here.

---
 drivers/net/ethernet/qualcomm/qca_debug.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

index 858c39cdae08a..acb60721991d8 100644
@@ -30,6 +30,8 @@
 
 #define QCASPI_MAX_REGS 0x20
 
+#define QCASPI_RX_MAX_FRAMES 4
+
 static const u16 qcaspi_spi_regs[] = {
 	SPI_REG_BFR_SIZE,
 	SPI_REG_WRBUF_SPC_AVA,

@@ -266,9 +268,9 @@ qcaspi_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ring)
 {
 	struct qcaspi *qca = netdev_priv(dev);
 
-	ring->rx_max_pending = 4;
+	ring->rx_max_pending = QCASPI_RX_MAX_FRAMES;
 	ring->tx_max_pending = TX_RING_MAX_LEN;
-	ring->rx_pending = 4;
+	ring->rx_pending = QCASPI_RX_MAX_FRAMES;
 	ring->tx_pending = qca->txr.count;
 }
 

@@ -277,7 +279,7 @@ qcaspi_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ring)
 {
 	struct qcaspi *qca = netdev_priv(dev);
 
-	if ((ring->rx_pending) ||
+	if (ring->rx_pending != QCASPI_RX_MAX_FRAMES ||
 	    (ring->rx_mini_pending) ||
 	    (ring->rx_jumbo_pending))
 		return -EINVAL;

2.43.0

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lech Perczak <[email protected]>

[ Upstream commit 99360d9620f09fb8bc15548d855011bbb198c680 ]

Interface 4 is used by for QMI interface in stock firmware of MF28D, the router which uses MF290 modem. Rebind it to qmi_wwan after freeing it up from option driver.
The proper configuration is:

Interface mapping is:
0: QCDM, 1: (unknown), 2: AT (PCUI), 2: AT (Modem), 4: QMI

T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  4 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=19d2 ProdID=0189 Rev= 0.00
S:  Manufacturer=ZTE, Incorporated
S:  Product=ZTE LTE Technologies MSM
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=84(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=86(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms

---
 drivers/net/usb/qmi_wwan.c | 1 +
 1 file changed, 1 insertion(+)

index 880aa7f6a779c..c6a1129d6274e 100644
@@ -1242,6 +1242,7 @@ static const struct usb_device_id products[] = {
 	{QMI_FIXED_INTF(0x19d2, 0x0168, 4)},
 	{QMI_FIXED_INTF(0x19d2, 0x0176, 3)},
 	{QMI_FIXED_INTF(0x19d2, 0x0178, 3)},
+	{QMI_FIXED_INTF(0x19d2, 0x0189, 4)},    /* ZTE MF290 */
 	{QMI_FIXED_INTF(0x19d2, 0x0191, 4)},	/* ZTE EuFi890 */
 	{QMI_FIXED_INTF(0x19d2, 0x0199, 1)},	/* ZTE MF820S */
 	{QMI_FIXED_INTF(0x19d2, 0x0200, 1)},

2.43.0

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Denis Benato <[email protected]>

[ Upstream commit 06ae5afce8cc1f7621cc5c7751e449ce20d68af7 ]

In the function asus_kbd_set_report the parameter buf is read-only as it gets copied in a memory portion suitable for USB transfer, but the parameter is not marked as const: add the missing const and mark const immutable buffers passed to that function.

---
 drivers/hid/hid-asus.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

index 52f65d0f44cae..3094e75617dd3 100644
@@ -232,7 +232,7 @@ static int asus_raw_event(struct hid_device *hdev,
 	return 0;
 }
 
-static int asus_kbd_set_report(struct hid_device *hdev, u8 *buf, size_t buf_size)
+static int asus_kbd_set_report(struct hid_device *hdev, const u8 *buf, size_t buf_size)
 {
 	unsigned char *dmabuf;
 	int ret;

@@ -251,7 +251,7 @@ static int asus_kbd_set_report(struct hid_device *hdev, u8 *buf, size_t buf_size
 
 static int asus_kbd_init(struct hid_device *hdev)
 {
-	u8 buf[] = { FEATURE_KBD_REPORT_ID, 0x41, 0x53, 0x55, 0x53, 0x20, 0x54,
+	const u8 buf[] = { FEATURE_KBD_REPORT_ID, 0x41, 0x53, 0x55, 0x53, 0x20, 0x54,
 		     0x65, 0x63, 0x68, 0x2e, 0x49, 0x6e, 0x63, 0x2e, 0x00 };
 	int ret;
 

@@ -265,7 +265,7 @@ static int asus_kbd_init(struct hid_device *hdev)
 static int asus_kbd_get_functions(struct hid_device *hdev,
 				  unsigned char *kbd_func)
 {
-	u8 buf[] = { FEATURE_KBD_REPORT_ID, 0x05, 0x20, 0x31, 0x00, 0x08 };
+	const u8 buf[] = { FEATURE_KBD_REPORT_ID, 0x05, 0x20, 0x31, 0x00, 0x08 };
 	u8 *readbuf;
 	int ret;
 

2.43.0

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Baokun Li <[email protected]>

commit 2dcf5fde6dffb312a4bfb8ef940cea2d1f402e32 upstream.

For files with logical blocks close to EXT_MAX_BLOCKS, the file size predicted in ext4_mb_normalize_request() may exceed EXT_MAX_BLOCKS. This can cause some blocks to be preallocated that will not be used. And after [Fixes], the following issue may be triggered:

=========================================================
kernel BUG at fs/ext4/mballoc.c:4653!

 Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
 CPU: 1 PID: 2357 Comm: xfs_io 6.7.0-rc2-00195-g0f5cc96c367f
 Hardware name: linux,dummy-virt (DT)
 pc : ext4_mb_use_inode_pa+0x148/0x208
 lr : ext4_mb_use_inode_pa+0x98/0x208
 Call trace:
  ext4_mb_use_inode_pa+0x148/0x208
  ext4_mb_new_inode_pa+0x240/0x4a8
  ext4_mb_use_best_found+0x1d4/0x208
  ext4_mb_try_best_found+0xc8/0x110
  ext4_mb_regular_allocator+0x11c/0xf48
  ext4_mb_new_blocks+0x790/0xaa8
  ext4_ext_map_blocks+0x7cc/0xd20
  ext4_map_blocks+0x170/0x600
  ext4_iomap_begin+0x1c0/0x348
=========================================================

Here is a calculation when adjusting ac_b_ex in ext4_mb_new_inode_pa():

	ex.fe_logical = orig_goal_end - EXT4_C2B(sbi, ex.fe_len);
	if (ac->ac_o_ex.fe_logical >= ex.fe_logical)
		goto adjust_bex;

The problem is that when orig_goal_end is subtracted from ac_b_ex.fe_len it is still greater than EXT_MAX_BLOCKS, which causes ex.fe_logical to overflow to a very small value, which ultimately triggers a BUG_ON in ext4_mb_new_inode_pa() because pa->pa_free < len.

The last logical block of an actual write request does not exceed EXT_MAX_BLOCKS, so in ext4_mb_normalize_request() also avoids normalizing the last logical block to exceed EXT_MAX_BLOCKS to avoid the above issue.

The test case in [Link] can reproduce the above issue with 64k block size.

---
 fs/ext4/mballoc.c |    4 ++++
 1 file changed, 4 insertions(+)

@@ -3207,6 +3207,10 @@ ext4_mb_normalize_request(struct ext4_al
 	start = max(start, rounddown(ac->ac_o_ex.fe_logical,
 			(ext4_lblk_t)EXT4_BLOCKS_PER_GROUP(ac->ac_sb)));
 
+	/* avoid unnecessary preallocation that may trigger assertions */
+	if (start + size > EXT_MAX_BLOCKS)
+		size = EXT_MAX_BLOCKS - start;
+
 	/* don't cover already allocated blocks in selected range */
 	if (ar->pleft && start <= ar->lleft) {
 		size -= ar->lleft + 1 - start;

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Florent Revest <[email protected]>

commit c12296bbecc488623b7d1932080e394d08f3226b upstream.

In __team_options_register, team_options are allocated and appended to the team's option_list.
If one option instance allocation fails, the "inst_rollback" cleanup path frees the previously allocated options but doesn't remove them from the team's option_list.
This leaves dangling pointers that can be dereferenced later by other parts of the team driver that iterate over options.

This patch fixes the cleanup path to remove the dangling pointers from the list.

As far as I can tell, this uaf doesn't have much security implications since it would be fairly hard to exploit (an attacker would need to make the allocation of that specific small object fail) but it's still nice to fix.

---
 drivers/net/team/team.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

@@ -296,8 +296,10 @@ static int __team_options_register(struc
 	return 0;
 
 inst_rollback:
-	for (i--; i >= 0; i--)
+	for (i--; i >= 0; i--) {
 		__team_option_inst_del_option(team, dst_opts[i]);
+		list_del(&dst_opts[i]->list);
+	}
 
 	i = option_count;
 alloc_rollback:

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Steven Rostedt (Google) <[email protected]>

commit 17d801758157bec93f26faaf5ff1a8b9a552d67a upstream.

Reading the ring buffer does a swap of a sub-buffer within the ring buffer with a empty sub-buffer. This allows the reader to have full access to the content of the sub-buffer that was swapped out without having to worry about contention with the writer.

The readers call ring_buffer_alloc_read_page() to allocate a page that will be used to swap with the ring buffer. When the code is finished with the reader page, it calls ring_buffer_free_read_page(). Instead of freeing the page, it stores it as a spare. Then next call to ring_buffer_alloc_read_page() will return this spare instead of calling into the memory management system to allocate a new page.

Unfortunately, on freeing of the ring buffer, this spare page is not freed, and causes a memory leak.

---
 kernel/trace/ring_buffer.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -1287,6 +1287,8 @@ static void rb_free_cpu_buffer(struct ri
 		free_buffer_page(bpage);
 	}
 
+	free_page((unsigned long)cpu_buffer->free_page);
+
 	kfree(cpu_buffer);
 }
 

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Naveen N Rao <[email protected]>

commit 41a506ef71eb38d94fe133f565c87c3e06ccc072 upstream.

With ppc64 -mprofile-kernel and ppc32 -pg, profiling instructions to call into ftrace are emitted right at function entry. The instruction sequence used is minimal to reduce overhead. Crucially, a stackframe is not created for the function being traced. This breaks stack unwinding since the function being traced does not have a stackframe for itself. As such, it never shows up in the backtrace:

/sys/kernel/debug/tracing # echo 1 > /proc/sys/kernel/stack_tracer_enabled /sys/kernel/debug/tracing # cat stack_trace

        Depth    Size   Location    (17 entries)
        -----    ----   --------
  0)     4144      32   ftrace_call+0x4/0x44
  1)     4112     432   get_page_from_freelist+0x26c/0x1ad0
  2)     3680     496   __alloc_pages+0x290/0x1280
  3)     3184     336   __folio_alloc+0x34/0x90
  4)     2848     176   vma_alloc_folio+0xd8/0x540
  5)     2672     272   __handle_mm_fault+0x700/0x1cc0
  6)     2400     208   handle_mm_fault+0xf0/0x3f0
  7)     2192      80   ___do_page_fault+0x3e4/0xbe0
  8)     2112     160   do_page_fault+0x30/0xc0
  9)     1952     256   data_access_common_virt+0x210/0x220
 10)     1696     400   0xc00000000f16b100
 11)     1296     384   load_elf_binary+0x804/0x1b80
 12)      912     208   bprm_execve+0x2d8/0x7e0
 13)      704      64   do_execveat_common+0x1d0/0x2f0
 14)      640     160   sys_execve+0x54/0x70
 15)      480      64   system_call_exception+0x138/0x350
 16)      416     416   system_call_common+0x160/0x2c4

Fix this by having ftrace create a dummy stackframe for the function being traced. With this, backtraces now capture the function being traced:

/sys/kernel/debug/tracing # cat stack_trace

        Depth    Size   Location    (17 entries)
        -----    ----   --------
  0)     3888      32   _raw_spin_trylock+0x8/0x70
  1)     3856     576   get_page_from_freelist+0x26c/0x1ad0
  2)     3280      64   __alloc_pages+0x290/0x1280
  3)     3216     336   __folio_alloc+0x34/0x90
  4)     2880     176   vma_alloc_folio+0xd8/0x540
  5)     2704     416   __handle_mm_fault+0x700/0x1cc0
  6)     2288      96   handle_mm_fault+0xf0/0x3f0
  7)     2192      48   ___do_page_fault+0x3e4/0xbe0
  8)     2144     192   do_page_fault+0x30/0xc0
  9)     1952     608   data_access_common_virt+0x210/0x220
 10)     1344      16   0xc0000000334bbb50
 11)     1328     416   load_elf_binary+0x804/0x1b80
 12)      912      64   bprm_execve+0x2d8/0x7e0
 13)      848     176   do_execveat_common+0x1d0/0x2f0
 14)      672     192   sys_execve+0x54/0x70
 15)      480      64   system_call_exception+0x138/0x350
 16)      416     416   system_call_common+0x160/0x2c4

This results in two additional stores in the ftrace entry code, but produces reliable backtraces.

---
 arch/powerpc/kernel/trace/ftrace_64_mprofile.S |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

@@ -41,6 +41,9 @@ _GLOBAL(ftrace_caller)
 	/* Save the original return address in A's stack frame */
 	std	r0,LRSAVE(r1)
 
+	/* Create a minimal stack frame for representing B */
+	stdu	r1, -STACK_FRAME_MIN_SIZE(r1)
+
 	/* Create our stack frame + pt_regs */
 	stdu	r1,-SWITCH_FRAME_SIZE(r1)
 

@@ -64,6 +67,8 @@ _GLOBAL(ftrace_caller)
 	mflr	r7
 	/* Save it as pt_regs->nip */
 	std     r7, _NIP(r1)
+	/* Also save it in B's stackframe header for proper unwind */
+	std	r7, LRSAVE+SWITCH_FRAME_SIZE(r1)
 	/* Save the read LR in pt_regs->link */
 	std     r0, _LINK(r1)
 

@@ -146,7 +151,7 @@ ftrace_call:
 	ld	r2, 24(r1)
 
 	/* Pop our stack frame */
-	addi r1, r1, SWITCH_FRAME_SIZE
+	addi r1, r1, SWITCH_FRAME_SIZE+STACK_FRAME_MIN_SIZE
 
 #ifdef CONFIG_LIVEPATCH
         /*

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Naveen N Rao <[email protected]>

commit 4b3338aaa74d7d4ec5b6734dc298f0db94ec83d2 upstream.

Commit 41a506ef71eb ("powerpc/ftrace: Create a dummy stackframe to fix stack unwind") added use of a new stack frame on ftrace entry to fix stack unwind. However, the commit missed updating the offset used while tearing down the ftrace stack when ftrace is disabled. Fix the same.

In addition, the commit missed saving the correct stack pointer in pt_regs. Update the same.

---
 arch/powerpc/kernel/trace/ftrace_64_mprofile.S |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -54,7 +54,7 @@ _GLOBAL(ftrace_caller)
 	SAVE_10GPRS(22, r1)
 
 	/* Save previous stack pointer (r1) */
-	addi	r8, r1, SWITCH_FRAME_SIZE
+	addi	r8, r1, SWITCH_FRAME_SIZE+STACK_FRAME_MIN_SIZE
 	std	r8, GPR1(r1)
 
 	/* Load special regs for save below */

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Stefan Wahren <[email protected]>

[ Upstream commit 1057812d146dd658c9a9a96d869c2551150207b5 ]

In case of a reset triggered by the QCA7000 itself, the behavior of the qca_spi driver was not quite correct:
- in case of a pending RX frame decoding the drop counter must be incremented and decoding state machine reseted
- also the reset counter must always be incremented regardless of sync state

---
 drivers/net/ethernet/qualcomm/qca_spi.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

index 4142554dc29e3..201da9fba72a6 100644
@@ -592,11 +592,17 @@ qcaspi_spi_thread(void *data)
 			if (intr_cause & SPI_INT_CPU_ON) {
 				qcaspi_qca7k_sync(qca, QCASPI_EVENT_CPUON);
 
+				/* Frame decoding in progress */
+				if (qca->frm_handle.state != qca->frm_handle.init)
+					qca->net_dev->stats.rx_dropped++;
+
+				qcafrm_fsm_init_spi(&qca->frm_handle);
+				qca->stats.device_reset++;
+
 				/* not synced. */
 				if (qca->sync != QCASPI_SYNC_READY)
 					continue;
 
-				qca->stats.device_reset++;
 				netif_wake_queue(qca->net_dev);
 				netif_carrier_on(qca->net_dev);
 			}

2.43.0

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chengfeng Ye <[email protected]>

[ Upstream commit d5dba32b8f6cb39be708b726044ba30dbc088b30 ]

As &card->cli_queue_lock is acquired under softirq context along the following call chain from solos_bh(), other acquisition of the same lock inside process context should disable at least bh to avoid double lock.

<deadlock #1>
console_show()
--> spin_lock(&card->cli_queue_lock)
<interrupt>
--> solos_bh()
--> spin_lock(&card->cli_queue_lock)

This flaw was found by an experimental static analysis tool I am developing for irq-related deadlock.

To prevent the potential deadlock, the patch uses spin_lock_bh() on the card->cli_queue_lock under process context code consistently to prevent the possible deadlock scenario.

---
 drivers/atm/solos-pci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index 0df1a1c80b001..3a115c7f224fb 100644
@@ -458,9 +458,9 @@ static ssize_t console_show(struct device *dev, struct device_attribute *attr,
 	struct sk_buff *skb;
 	unsigned int len;
 
-	spin_lock(&card->cli_queue_lock);
+	spin_lock_bh(&card->cli_queue_lock);
 	skb = skb_dequeue(&card->cli_queue[SOLOS_CHAN(atmdev)]);
-	spin_unlock(&card->cli_queue_lock);
+	spin_unlock_bh(&card->cli_queue_lock);
 	if(skb == NULL)
 		return sprintf(buf, "No data.\n");
 

2.43.0

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chengfeng Ye <[email protected]>

[ Upstream commit 15319a4e8ee4b098118591c6ccbd17237f841613 ]

As &card->tx_queue_lock is acquired under softirq context along the following call chain from solos_bh(), other acquisition of the same lock inside process context should disable at least bh to avoid double lock.

<deadlock #2>
pclose()
--> spin_lock(&card->tx_queue_lock)
<interrupt>
--> solos_bh()
--> fpga_tx()
--> spin_lock(&card->tx_queue_lock)

This flaw was found by an experimental static analysis tool I am developing for irq-related deadlock.

To prevent the potential deadlock, the patch uses spin_lock_bh() on &card->tx_queue_lock under process context code consistently to prevent the possible deadlock scenario.

---
 drivers/atm/solos-pci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index 3a115c7f224fb..07a136cc20ab5 100644
@@ -968,14 +968,14 @@ static void pclose(struct atm_vcc *vcc)
 	struct pkt_hdr *header;
 
 	/* Remove any yet-to-be-transmitted packets from the pending queue */
-	spin_lock(&card->tx_queue_lock);
+	spin_lock_bh(&card->tx_queue_lock);
 	skb_queue_walk_safe(&card->tx_queue[port], skb, tmpskb) {
 		if (SKB_CB(skb)->vcc == vcc) {
 			skb_unlink(skb, &card->tx_queue[port]);
 			solos_pop(vcc, skb);
 		}
 	}
-	spin_unlock(&card->tx_queue_lock);
+	spin_unlock_bh(&card->tx_queue_lock);
 
 	skb = alloc_skb(sizeof(*header), GFP_KERNEL);
 	if (!skb) {

2.43.0

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hyunwoo Kim <[email protected]>

[ Upstream commit 24e90b9e34f9e039f56b5f25f6e6eb92cdd8f4b3 ]

Because do_vcc_ioctl() accesses sk->sk_receive_queue without holding a sk->sk_receive_queue.lock, it can cause a race with vcc_recvmsg().
A use-after-free for skb occurs with the following flow.

```
do_vcc_ioctl() -> skb_peek()
vcc_recvmsg() -> skb_recv_datagram() -> skb_free_datagram()
```

Add sk->sk_receive_queue.lock to do_vcc_ioctl() to fix this issue.

---
 net/atm/ioctl.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

index 2ff0e5e470e3d..38f7f164e4848 100644
@@ -71,14 +71,17 @@ static int do_vcc_ioctl(struct socket *sock, unsigned int cmd,
 	case SIOCINQ:
 	{
 		struct sk_buff *skb;
+		int amount;
 
 		if (sock->state != SS_CONNECTED) {
 			error = -EINVAL;
 			goto done;
 		}
+		spin_lock_irq(&sk->sk_receive_queue.lock);
 		skb = skb_peek(&sk->sk_receive_queue);
-		error = put_user(skb ? skb->len : 0,
-				 (int __user *)argp) ? -EFAULT : 0;
+		amount = skb ? skb->len : 0;
+		spin_unlock_irq(&sk->sk_receive_queue.lock);
+		error = put_user(amount, (int __user *)argp) ? -EFAULT : 0;
 		goto done;
 	}
 	case SIOCGSTAMP: /* borrowed from IP */

2.43.0

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hyunwoo Kim <[email protected]>

[ Upstream commit 810c38a369a0a0ce625b5c12169abce1dd9ccd53 ]

Because rose_ioctl() accesses sk->sk_receive_queue without holding a sk->sk_receive_queue.lock, it can cause a race with rose_accept().
A use-after-free for skb occurs with the following flow.

```
rose_ioctl() -> skb_peek()
rose_accept() -> skb_dequeue() -> kfree_skb()
```

Add sk->sk_receive_queue.lock to rose_ioctl() to fix this issue.

---
 net/rose/af_rose.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

index ac2ea4ebf7c7c..04e5e01002ae0 100644
@@ -1309,9 +1309,11 @@ static int rose_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 	case TIOCINQ: {
 		struct sk_buff *skb;
 		long amount = 0L;
-		/* These two are safe on a single CPU system as only user tasks fiddle here */
+
+		spin_lock_irq(&sk->sk_receive_queue.lock);
 		if ((skb = skb_peek(&sk->sk_receive_queue)) != NULL)
 			amount = skb->len;
+		spin_unlock_irq(&sk->sk_receive_queue.lock);
 		return put_user(amount, (unsigned int __user *) argp);
 	}
 

2.43.0

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dinghao Liu <[email protected]>

[ Upstream commit b65d52ac9c085c0c52dee012a210d4e2f352611b ]

qed_ilt_shadow_alloc() will call qed_ilt_shadow_free() to free p_hwfn->p_cxt_mngr->ilt_shadow on error. However, qed_cxt_tables_alloc() accesses the freed pointer on failure of qed_ilt_shadow_alloc() through calling qed_cxt_mngr_free(), which may lead to use-after-free. Fix this issue by setting p_mngr->ilt_shadow to NULL in qed_ilt_shadow_free().

---
 drivers/net/ethernet/qlogic/qed/qed_cxt.c | 1 +
 1 file changed, 1 insertion(+)

index 4fc3468f6f38b..6e8f894dcc13e 100644
@@ -1024,6 +1024,7 @@ static void qed_ilt_shadow_free(struct qed_hwfn *p_hwfn)
 		p_dma->p_virt = NULL;
 	}
 	kfree(p_mngr->ilt_shadow);
+	p_mngr->ilt_shadow = NULL;
 }
 
 static int qed_ilt_blk_alloc(struct qed_hwfn *p_hwfn,

2.43.0

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dong Chenchen <[email protected]>

[ Upstream commit f99cd56230f56c8b6b33713c5be4da5d6766be1f ]

syzkaller report:

kernel BUG at net/core/skbuff.c:3452!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI

 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.7.0-rc4-00009-gbee0e7762ad2-dirty #135
 RIP: 0010:skb_copy_and_csum_bits (net/core/skbuff.c:3452)
 Call Trace:
 icmp_glue_bits (net/ipv4/icmp.c:357)
 __ip_append_data.isra.0 (net/ipv4/ip_output.c:1165)
 ip_append_data (net/ipv4/ip_output.c:1362 net/ipv4/ip_output.c:1341)
 icmp_push_reply (net/ipv4/icmp.c:370)
 __icmp_send (./include/net/route.h:252 net/ipv4/icmp.c:772)
 ip_fragment.constprop.0 (./include/linux/skbuff.h:1234 net/ipv4/ip_output.c:592 net/ipv4/ip_output.c:577)
 __ip_finish_output (net/ipv4/ip_output.c:311 net/ipv4/ip_output.c:295)
 ip_output (net/ipv4/ip_output.c:427)
 __ip_queue_xmit (net/ipv4/ip_output.c:535)
 __tcp_transmit_skb (net/ipv4/tcp_output.c:1462)
 __tcp_retransmit_skb (net/ipv4/tcp_output.c:3387)
 tcp_retransmit_skb (net/ipv4/tcp_output.c:3404)
 tcp_retransmit_timer (net/ipv4/tcp_timer.c:604)
 tcp_write_timer (./include/linux/spinlock.h:391 net/ipv4/tcp_timer.c:716)

The panic issue was trigered by tcp simultaneous initiation. The initiation process is as follows:

TCP A TCP B

1. CLOSED CLOSED

2. SYN-SENT --> <SEQ=100><CTL=SYN> ...

3. SYN-RECEIVED <-- <SEQ=300><CTL=SYN> <-- SYN-SENT

4. ... <SEQ=100><CTL=SYN> --> SYN-RECEIVED

5. SYN-RECEIVED --> <SEQ=100><ACK=301><CTL=SYN,ACK> ...

// TCP B: not send challenge ack for ack limit or packet loss // TCP A: close

	tcp_close
	   tcp_send_fin
              if (!tskb && tcp_under_memory_pressure(sk))
                  tskb = skb_rb_last(&sk->tcp_rtx_queue); //pick SYN_ACK packet
           TCP_SKB_CB(tskb)->tcp_flags |= TCPHDR_FIN;  // set FIN flag

6. FIN_WAIT_1 --> <SEQ=100><ACK=301><END_SEQ=102><CTL=SYN,FIN,ACK> ...

// TCP B: send challenge ack to SYN_FIN_ACK

7. ... <SEQ=301><ACK=101><CTL=ACK> <-- SYN-RECEIVED //challenge ack

// TCP A: <SND.UNA=101>

8. FIN_WAIT_1 --> <SEQ=101><ACK=301><END_SEQ=102><CTL=SYN,FIN,ACK> ... // retransmit panic

	__tcp_retransmit_skb  //skb->len=0
	    tcp_trim_head
		len = tp->snd_una - TCP_SKB_CB(skb)->seq // len=101-100
		    __pskb_trim_head
			skb->data_len -= len // skb->len=-1, wrap around
	    ... ...
	    ip_fragment
		icmp_glue_bits //BUG_ON

If we use tcp_trim_head() to remove acked SYN from packet that contains data or other flags, skb->len will be incorrectly decremented. We can remove SYN flag that has been acked from rtx_queue earlier than tcp_trim_head(), which can fix the problem mentioned above.

---
 net/ipv4/tcp_output.c | 6 ++++++
 1 file changed, 6 insertions(+)

index 67636017f275a..2a07a167124c4 100644
@@ -2883,7 +2883,13 @@ int __tcp_retransmit_skb(struct sock *sk, struct sk_buff *skb, int segs)
 	if (skb_still_in_host_queue(sk, skb))
 		return -EBUSY;
 
+start:
 	if (before(TCP_SKB_CB(skb)->seq, tp->snd_una)) {
+		if (unlikely(TCP_SKB_CB(skb)->tcp_flags & TCPHDR_SYN)) {
+			TCP_SKB_CB(skb)->tcp_flags &= ~TCPHDR_SYN;
+			TCP_SKB_CB(skb)->seq++;
+			goto start;
+		}
 		if (unlikely(before(TCP_SKB_CB(skb)->end_seq, tp->snd_una))) {
 			WARN_ON_ONCE(1);
 			return -EINVAL;

2.43.0

Hi!

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.14.y

Best regards,
Pavel

DENX Software Engineering GmbH,        Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

Hi Greg,

No problems seen on x86_64 and aarch64 with our testing.

Thanks,
Harshit

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

## Build
* kernel: 4.14.334-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-4.14.y
* git commit: 2461d9a65af242d126575115a4f8fd0d26e737c6
* git describe: v4.14.333-27-g2461d9a65af2
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.14.y/build/v4.14.333-27-g2461d9a65af2

## Test Regressions (compared to v4.14.333)

## Metric Regressions (compared to v4.14.333)

## Test Fixes (compared to v4.14.333)

## Metric Fixes (compared to v4.14.333)

## Test result summary
total: 54491, pass: 45633, fail: 1624, skip: 7190, xfail: 44

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 108 total, 103 passed, 5 failed
* arm64: 35 total, 31 passed, 4 failed
* i386: 21 total, 18 passed, 3 failed
* mips: 19 total, 19 passed, 0 failed
* parisc: 3 total, 0 passed, 3 failed
* powerpc: 8 total, 7 passed, 1 failed
* s390: 6 total, 5 passed, 1 failed
* sh: 10 total, 10 passed, 0 failed
* sparc: 6 total, 6 passed, 0 failed
* x86_64: 27 total, 23 passed, 4 failed

## Test suites summary
* boot
* kselftest-android
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers-dma-buf
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-filesystems-binderfs
* kselftest-filesystems-epoll
* kselftest-firmware
* kselftest-fpu
* kselftest-ftrace
* kselftest-futex
* kselftest-gpio
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-net-forwarding
* kselftest-net-mptcp
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-user
* kselftest-vm
* kselftest-zram
* kunit
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-crypto
* ltp-cve
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* rcutorture

--
Linaro LKFT
https://lkft.linaro.org

All tests passing for Tegra ...

Test results for stable-v4.14:

    10 builds:	10 pass, 0 fail
    16 boots:	16 pass, 0 fail
    32 tests:	32 pass, 0 fail

Linux version: 4.14.334-rc1-g2461d9a65af2
Boards tested: tegra124-jetson-tk1, tegra20-ventana,

                tegra210-p2371-2180, tegra30-cardhu-a04

Jon