Miscellaneous small things
Sakari Ailus
maintainerv2 cover Miscellaneous small things
Hi folks,
This set does three things: refactor link creation in ipu3-cio2 driver by using v4l2_fwnode_create_links_for_pad(), add debug prints in v4l2_fwnode_create_links_for_pad() and drop an unneeded debug print in media_relase().
since v1:
- Drop mistakenly added Prabhakar's Tested-by:.
- Print entity names and pad numbers for links that already exist in v4l2_create_fwnode_links_to_pad().
- Use "was" instead of "is" when comparing pad indices.
Sakari Ailus (3):
media: ipu3-cio2: Further clean up async subdev link creation
media: v4l2-mc: Add debug prints for
v4l2_fwnode_create_links_for_pad()
media: mc: Drop useless debug print on file handle release
drivers/media/mc/mc-devnode.c | 1 - drivers/media/pci/intel/ipu3/ipu3-cio2.c | 22 +++++----------------- drivers/media/v4l2-core/v4l2-mc.c | 23 +++++++++++++++++++---- 3 files changed, 24 insertions(+), 22 deletions(-)
Signature · 1 line
2.39.2
Sakari Ailus
maintainerPATCH v2 1/3 media: ipu3-cio2: Further clean up async subdev link creation
Use v4l2_create_fwnode_links_to_pad() to create links from async sub-devices to the CSI-2 receiver subdevs.
--- drivers/media/pci/intel/ipu3/ipu3-cio2.c | 22 +++++----------------- 1 file changed, 5 insertions(+), 17 deletions(-)
drivers/media/pci/intel/ipu3/ipu3-cio2.c +5 -17
@@ -28,6 +28,7 @@#include <media/v4l2-device.h> #include <media/v4l2-event.h> #include <media/v4l2-fwnode.h> +#include <media/v4l2-mc.h> #include <media/v4l2-ioctl.h> #include <media/videobuf2-dma-sg.h>
@@ -1407,7 +1408,6 @@ static void cio2_notifier_unbind(struct v4l2_async_notifier *notifier,static int cio2_notifier_complete (struct v4l2_async_notifier *notifier) {struct cio2_device *cio2 =to_cio2_device (notifier); -struct device *dev = &cio2->pci_dev->dev;struct sensor_async_subdev *s_asd;struct v4l2_async_connection *asd;struct cio2_queue *q;
@@ -1417,23 +1417,10 @@ static int cio2_notifier_complete(struct v4l2_async_notifier *notifier) s_asd =to_sensor_asd (asd); q = &cio2->queue[s_asd->csi2.port]; - ret =media_entity_get_fwnode_pad (&q->sensor->entity, - s_asd->asd.match.fwnode, -MEDIA_PAD_FL_SOURCE ); -if (ret <0 ) { -dev_err (dev,"no pad for endpoint %pfw (%d)\n" , - s_asd->asd.match.fwnode, ret); -return ret; - } - - ret =media_create_pad_link (&q->sensor->entity, ret, - &q->subdev.entity,CIO2_PAD_SINK , -0 ); -if (ret) { -dev_err (dev,"failed to create link for %s (endpoint %pfw, error %d)\n" , - q->sensor->name, s_asd->asd.match.fwnode, ret); + ret =v4l2_create_fwnode_links_to_pad (asd->sd, + &q->subdev_pads[CIO2_PAD_SINK ],0 ); +if (ret)return ret; - } }return v4l2_device_register_subdev_nodes (&cio2->v4l2_dev);
@@ -1572,6 +1559,7 @@ static int cio2_queue_init(struct cio2_device *cio2, struct cio2_queue *q)v4l2_subdev_init (subdev, &cio2_subdev_ops); subdev->flags =V4L2_SUBDEV_FL_HAS_DEVNODE |V4L2_SUBDEV_FL_HAS_EVENTS ; subdev->owner =THIS_MODULE ; + subdev->dev = dev;snprintf (subdev->name,sizeof (subdev->name),CIO2_ENTITY_NAME " %td" , q - cio2->queue); subdev->entity.function =MEDIA_ENT_F_VID_IF_BRIDGE ;
Signature · 1 line
2.39.2
Sakari Ailus
maintainerPATCH v2 2/3 media: v4l2-mc: Add debug prints for v4l2_fwnode_create_links_for_pad()
In reply to Sakari AilusAdd relevant debug prints for v4l2_fwnode_create_links_for_pad(). This should help debugging when things go wrong.
--- drivers/media/v4l2-core/v4l2-mc.c | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-)
drivers/media/v4l2-core/v4l2-mc.c +19 -4
@@ -337,12 +337,18 @@ int v4l2_create_fwnode_links_to_pad(struct v4l2_subdev *src_sd, src_idx =media_entity_get_fwnode_pad (&src_sd->entity, endpoint,MEDIA_PAD_FL_SOURCE ); -if (src_idx <0 ) +if (src_idx <0 ) { +dev_dbg (src_sd->dev,"no pad found for %pfw\n" , + endpoint);continue ; + } remote_ep =fwnode_graph_get_remote_endpoint (endpoint); -if (!remote_ep) +if (!remote_ep) { +dev_dbg (src_sd->dev,"no remote ep found for %pfw\n" , + endpoint);continue ; + }/* * ask the sink to verify it owns the remote endpoint,
@@ -353,8 +359,12 @@ int v4l2_create_fwnode_links_to_pad(struct v4l2_subdev *src_sd, MEDIA_PAD_FL_SINK);fwnode_handle_put (remote_ep); -if (sink_idx <0 || sink_idx != sink->index) +if (sink_idx <0 || sink_idx != sink->index) { +dev_dbg (src_sd->dev, +"sink pad index mismatch or error (is %d, expected %u)\n" , + sink_idx, sink->index);continue ; + }/* * the source endpoint corresponds to one of its source pads,
@@ -367,8 +377,13 @@ int v4l2_create_fwnode_links_to_pad(struct v4l2_subdev *src_sd, src = &src_sd->entity.pads[src_idx];/* skip if link already exists */ -if (media_entity_find_link (src, sink)) +if (media_entity_find_link (src, sink)) { +dev_dbg (src_sd->dev, +"link %s:%d -> %s:%d already exists\n" , + src_sd->entity.name, src_idx, + sink->entity->name, sink_idx);continue ; + } dev_dbg(src_sd->dev, "creating link %s:%d -> %s:%d\n", src_sd->entity.name, src_idx,
Signature · 1 line
2.39.2
Sakari Ailus
maintainerPATCH v2 3/3 media: mc: Drop useless debug print on file handle release
In reply to Sakari AilusDrop a debug print in media_release(), which is a release callback for a file handle. Printing a debug message here is simply not necessary.
--- drivers/media/mc/mc-devnode.c | 1 - 1 file changed, 1 deletion(-)
drivers/media/mc/mc-devnode.c +0 -1
@@ -190,7 +190,6 @@ static int media_release(struct inode *inode, struct file *filp)return value is ignored. */ put_device (&devnode->dev); -pr_debug ("%s: Media Release\n" , __func__);return 0 ; }
Signature · 1 line
2.39.2
Re: [PATCH v2 2/3] media: v4l2-mc: Add debug prints for v4l2_fwnode_create_links_for_pad()
In reply to Sakari AilusHi Sakari,
Thank you for the patch.
Quoted 4 lines · Sakari Ailus
Add relevant debug prints for
v4l2_fwnode_create_links_for_pad(). This should help debugging when things go wrong.Signed-off-by Sakari Ailus <[email protected]>
Quoted 9 lines
--- drivers/media/v4l2-core/v4l2-mc.c | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-)drivers/media/v4l2-core/v4l2-mc.c +0
-0
drivers/media/v4l2-core/v4l2-mc.c int v4l2_create_fwnode_links_to_pad(struct v4l2_subdev *src_sd, · line 341
Quoted 6 lines
drivers/media/v4l2-core/v4l2-mc.c +2
-1@@ -337,12 +337,18 @@ int v4l2_create_fwnode_links_to_pad(struct v4l2_subdev *src_sd, src_idx =media_entity_get_fwnode_pad (&src_sd->entity, endpoint,MEDIA_PAD_FL_SOURCE ); -if (src_idx <0 ) +if (src_idx <0 ) { + dev_dbg(src_sd->dev, "no pad found for %pfw\n",
Make is "no source pad found", as we're looking for source pads only and the message would be confusing if the entity has sink pads.
Quoted 29 lines
drivers/media/v4l2-core/v4l2-mc.c +11
-2+ endpoint);continue ; + } remote_ep =fwnode_graph_get_remote_endpoint (endpoint); -if (!remote_ep) +if (!remote_ep) { +dev_dbg (src_sd->dev,"no remote ep found for %pfw\n" , + endpoint);continue ; + }/* * ask the sink to verify it owns the remote endpoint, @@ -353,8 +359,12 @@ int v4l2_create_fwnode_links_to_pad(struct v4l2_subdev *src_sd, MEDIA_PAD_FL_SINK);fwnode_handle_put (remote_ep); -if (sink_idx <0 || sink_idx != sink->index) +if (sink_idx <0 || sink_idx != sink->index) { +dev_dbg (src_sd->dev, +"sink pad index mismatch or error (is %d, expected %u)\n" , + sink_idx, sink->index);continue ; + }/* * the source endpoint corresponds to one of its source pads,
drivers/media/v4l2-core/v4l2-mc.c int v4l2_create_fwnode_links_to_pad(struct v4l2_subdev *src_sd, · line 383
Quoted 8 lines
drivers/media/v4l2-core/v4l2-mc.c +4
-1@@ -367,8 +377,13 @@ int v4l2_create_fwnode_links_to_pad(struct v4l2_subdev *src_sd, src = &src_sd->entity.pads[src_idx];/* skip if link already exists */ -if (media_entity_find_link (src, sink)) +if (media_entity_find_link (src, sink)) { + dev_dbg(src_sd->dev, + "link %s:%d -> %s:%d already exists\n", + src_sd->entity.name, src_idx,
Is this worth a debug message ? If the link already exists, do you expect this to cause any kind of issue that someone will want to debug ?
Overall, are the new debug messages in this patch helped debugging a real life problem ?
Quoted 6 lines
drivers/media/v4l2-core/v4l2-mc.c +2
-0+ sink->entity->name, sink_idx);continue ; + } dev_dbg(src_sd->dev, "creating link %s:%d -> %s:%d\n", src_sd->entity.name, src_idx,
Signature · 3 lines
Regards, Laurent Pinchart
Sakari Ailus
maintainerRe: [PATCH v2 2/3] media: v4l2-mc: Add debug prints for v4l2_fwnode_create_links_for_pad()
Hi Laurent,
Quoted 11 lines · Laurent Pinchart
Hi Sakari,
Thank you for the patch.
Quoted 4 lines · Sakari Ailus
Add relevant debug prints for
v4l2_fwnode_create_links_for_pad(). This should help debugging when things go wrong.Signed-off-by Sakari Ailus <[email protected]>Reviewed-by Laurent Pinchart <[email protected]>
Thanks!
Quoted 5 lines
Quoted 5 lines
--- drivers/media/v4l2-core/v4l2-mc.c | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-)
Quoted 14 lines
drivers/media/v4l2-core/v4l2-mc.c int v4l2_create_fwnode_links_to_pad(struct v4l2_subdev *src_sd, · line 341
Quoted 11 lines
drivers/media/v4l2-core/v4l2-mc.c +2
-1@@ -337,12 +337,18 @@ int v4l2_create_fwnode_links_to_pad(struct v4l2_subdev *src_sd, src_idx =media_entity_get_fwnode_pad (&src_sd->entity, endpoint,MEDIA_PAD_FL_SOURCE ); -if (src_idx <0 ) +if (src_idx <0 ) { + dev_dbg(src_sd->dev, "no pad found for %pfw\n",Make is "no source pad found", as we're looking for source pads only and the message would be confusing if the entity has sink pads.
I'll add this.
Quoted 42 lines
Quoted 30 lines
drivers/media/v4l2-core/v4l2-mc.c +11
-2+ endpoint);continue ; + } remote_ep =fwnode_graph_get_remote_endpoint (endpoint); -if (!remote_ep) +if (!remote_ep) { +dev_dbg (src_sd->dev,"no remote ep found for %pfw\n" , + endpoint);continue ; + }/* * ask the sink to verify it owns the remote endpoint, @@ -353,8 +359,12 @@ int v4l2_create_fwnode_links_to_pad(struct v4l2_subdev *src_sd, MEDIA_PAD_FL_SINK);fwnode_handle_put (remote_ep); -if (sink_idx <0 || sink_idx != sink->index) +if (sink_idx <0 || sink_idx != sink->index) { +dev_dbg (src_sd->dev, +"sink pad index mismatch or error (is %d, expected %u)\n" , + sink_idx, sink->index);continue ; + }/* * the source endpoint corresponds to one of its source pads, drivers/media/v4l2-core/v4l2-mc.c int v4l2_create_fwnode_links_to_pad(struct v4l2_subdev *src_sd, · line 383
Quoted 8 lines
drivers/media/v4l2-core/v4l2-mc.c +4
-1@@ -367,8 +377,13 @@ int v4l2_create_fwnode_links_to_pad(struct v4l2_subdev *src_sd, src = &src_sd->entity.pads[src_idx];/* skip if link already exists */ -if (media_entity_find_link (src, sink)) +if (media_entity_find_link (src, sink)) { + dev_dbg(src_sd->dev, + "link %s:%d -> %s:%d already exists\n", + src_sd->entity.name, src_idx,Is this worth a debug message ? If the link already exists, do you expect this to cause any kind of issue that someone will want to debug ?
Quoted 2 lines
Overall, are the new debug messages in this patch helped debugging a real life problem ?
They would have helped debugging development time versions of the previous patch. :-)
Multiple people have also had issues debugging drivers depending on matching sub-devices and creating links between them due to the complexity of the firmware interface and the in-kernel framework. Telling what is taking happening here is one way to address that.
If a link already exists, something is probably wrong. I didn't want to make this an error in this patch as I didn't want to introduce a functional change here. I think it could be made later on.
Quoted 8 lines
Quoted 7 lines
drivers/media/v4l2-core/v4l2-mc.c +2
-0+ sink->entity->name, sink_idx);continue ; + } dev_dbg(src_sd->dev, "creating link %s:%d -> %s:%d\n", src_sd->entity.name, src_idx,
Signature · 3 lines
Regards, Sakari Ailus