bpf: Track aligned st store as imprecise spilled registers
Subsystems (4)
Yonghong Song
reviewerPATCH v4 1/2 bpf: Track aligned st store as imprecise spilled registers
With patch set [1], precision backtracing supports register spill/fill to/from the stack. The patch [2] allows initial imprecise register spill with content 0. This is a common case for cpuv3 and lower for initializing the stack variables with pattern
r1 = 0
*(u64 *)(r10 - 8) = r1
and the [2] has demonstrated good verification improvement.
For cpuv4, the initialization could be
*(u64 *)(r10 - 8) = 0
The current verifier marks the r10-8 contents with STACK_ZERO. Similar to [2], let us permit the above insn to behave like imprecise register spill which can reduce number of verified states. The change is in function check_stack_write_fixed_off().
Before this patch, spilled zero will be marked as STACK_ZERO which can provide precise values. In check_stack_write_var_off(), STACK_ZERO will be maintained if writing a const zero so later it can provide precise values if needed.
The above handling of '*(u64 *)(r10 - 8) = 0' as a spill will have issues in check_stack_write_var_off() as the spill will be converted to STACK_MISC and the precise value 0
is lost. To fix this issue, if the spill slots with const zero and the BPF_ST write also with const zero, the spill slots are preserved, which can later provide precise values
if needed. Without the change in check_stack_write_var_off(), the test_verifier subtest 'BPF_ST_MEM stack imm zero, variable offset' will fail.
I checked cpuv3 and cpuv4 with and without this patch with veristat. There is no state change for cpuv3 since '*(u64 *)(r10 - 8) = 0' is only generated with cpuv4.
For cpuv4:
$ ../veristat -C old.cpuv4.csv new.cpuv4.csv -e file,prog,insns,states -f 'insns_diff!=0' File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF) ------------------------------------------ ------------------- --------- --------- --------------- ---------- ---------- ------------- local_storage_bench.bpf.linked3.o get_local 228 168 -60 (-26.32%) 17 14 -3 (-17.65%) pyperf600_bpf_loop.bpf.linked3.o on_event 6066 4889 -1177 (-19.40%) 403 321 -82 (-20.35%) test_cls_redirect.bpf.linked3.o cls_redirect 35483 35387 -96 (-0.27%) 2179 2177 -2 (-0.09%) test_l4lb_noinline.bpf.linked3.o balancer_ingress 4494 4522 +28 (+0.62%) 217 219 +2 (+0.92%) test_l4lb_noinline_dynptr.bpf.linked3.o balancer_ingress 1432 1455 +23 (+1.61%) 92 94 +2 (+2.17%) test_xdp_noinline.bpf.linked3.o balancer_ingress_v6 3462 3458 -4 (-0.12%) 216 216 +0 (+0.00%) verifier_iterating_callbacks.bpf.linked3.o widening 52 41 -11 (-21.15%) 4 3 -1 (-25.00%) xdp_synproxy_kern.bpf.linked3.o syncookie_tc 12412 11719 -693 (-5.58%) 345 330 -15 (-4.35%) xdp_synproxy_kern.bpf.linked3.o syncookie_xdp 12478 11794 -684 (-5.48%) 346 331 -15 (-4.34%)
test_l4lb_noinline and test_l4lb_noinline_dynptr has minor regression, but pyperf600_bpf_loop and local_storage_bench gets pretty good improvement.
[1] https://lore.kernel.org/all/[email protected]/
[2] https://lore.kernel.org/all/[email protected]/
--- kernel/bpf/verifier.c | 17 +++++++++++++++-- .../selftests/bpf/progs/verifier_spill_fill.c | 16 ++++++++-------- 2 files changed, 23 insertions(+), 10 deletions(-)
Changelogs:
v3 -> v4:
- add missed SPILL slot check in check_stack_write_var_off().
- remove incorrect comments in the new test.
v2 -> v3:
- add precision checking to the spilled zero value register in check_stack_write_var_off().
- check spill slot-by-slot instead of in a bunch within a spi.
v1 -> v2:
- Preserve with-const-zero spill if writing is also zero in check_stack_write_var_off().
- Add a test with not-8-byte-aligned BPF_ST store.
kernel/bpf/verifier.c +15 -2
@@ -4493,7 +4493,7 @@ static int check_stack_write_fixed_off(struct bpf_verifier_env *env,if (fls64 (reg->umax_value) >BITS_PER_BYTE * size) state->stack[spi].spilled_ptr.id =0 ; }else if (!reg && !(off %BPF_REG_SIZE ) &&is_bpf_st_mem (insn) && - insn->imm !=0 && env->bpf_capable) { + env->bpf_capable) {struct bpf_reg_state fake_reg = {};__mark_reg_known (&fake_reg, insn->imm);
@@ -4640,7 +4640,20 @@ static int check_stack_write_var_off(struct bpf_verifier_env *env,return -EINVAL ; } -/* Erase all spilled pointers. */ +/* If writing_zero and the spi slot contains a spill of value 0, +* maintain the spill type. +*/ +if (writing_zero && *stype ==STACK_SPILL && +is_spilled_scalar_reg (&state->stack[spi])) { +struct bpf_reg_state *spill_reg = &state->stack[spi].spilled_ptr; + +if (tnum_is_const (spill_reg->var_off) && spill_reg->var_off.value ==0 ) { + zero_used = true; +continue ; + } + } + +/* Erase all other spilled pointers. */ state->stack[spi].spilled_ptr.type =NOT_INIT ;/* Update the slot type. */
tools/testing/selftests/bpf/progs/verifier_spill_fill.c +8 -8
@@ -495,14 +495,14 @@ char single_byte_buf[1] SEC(".data.single_byte_buf"); SEC("raw_tp") __log_level(2) __success -/* make sure fp-8 is all STACK_ZERO */ -__msg("2: (7a) *(u64 *)(r10 -8) = 0 ; R10=fp0 fp-8_w=00000000") +/* fp-8 is spilled IMPRECISE value zero (represented by a zero value fake reg) */ +__msg("2: (7a) *(u64 *)(r10 -8) = 0 ; R10=fp0 fp-8_w=0")/* but fp-16 is spilled IMPRECISE zero const reg */ __msg ("4: (7b) *(u64 *)(r10 -16) = r0 ; R0_w=0 R10=fp0 fp-16_w=0" ) -/* validate that assigning R2 from STACK_ZERO doesn't mark register +/* validate that assigning R2 from STACK_SPILL with zero value doesn't mark register * precise immediately; if necessary, it will be marked precise later */ -__msg ("6: (71) r2 = *(u8 *)(r10 -1) ; R2_w=0 R10=fp0 fp-8_w=00000000" ) +__msg ("6: (71) r2 = *(u8 *)(r10 -1) ; R2_w=0 R10=fp0 fp-8_w=0" )/* similarly, when R2 is assigned from spilled register, it is initially * imprecise, but will be marked precise later once it is used in precise context */
@@ -520,14 +520,14 @@ __msg("mark_precise: frame0: regs=r0 stack= before 3: (b7) r0 = 0")__naked void partial_stack_load_preserves_zeros (void ) { asmvolatile ( -/* fp-8 is all STACK_ZERO */ +/* fp-8 is value zero (represented by a zero value fake reg) */ ".8byte %[fp8_st_zero];" /* LLVM-18+: *(u64 *)(r10 -8) = 0; */ /* fp-16 is const zero register */ "r0 = 0;" "*(u64 *)(r10 -16) = r0;" -/* load single U8 from non-aligned STACK_ZERO slot */ +/* load single U8 from non-aligned spilled value zero slot */ "r1 = %[single_byte_buf];" "r2 = *(u8 *)(r10 -1);" "r1 += r2;"
@@ -539,7 +539,7 @@ __naked void partial_stack_load_preserves_zeros(void)"r1 += r2;" "*(u8 *)(r1 + 0) = r2;" /* this should be fine */ -/* load single U16 from non-aligned STACK_ZERO slot */ +/* load single U16 from non-aligned spilled value zero slot */ "r1 = %[single_byte_buf];" "r2 = *(u16 *)(r10 -2);" "r1 += r2;"
@@ -551,7 +551,7 @@ __naked void partial_stack_load_preserves_zeros(void)"r1 += r2;" "*(u8 *)(r1 + 0) = r2;" /* this should be fine */ -/* load single U32 from non-aligned STACK_ZERO slot */ +/* load single U32 from non-aligned spilled value zero slot */ "r1 = %[single_byte_buf];" "r2 = *(u32 *)(r10 -4);" "r1 += r2;"
Signature · 1 line
2.34.1
Yonghong Song
reviewerPATCH v4 2/2 selftests/bpf: Add a selftest with not-8-byte aligned BPF_ST
Add a selftest with a 4 bytes BPF_ST of 0 where the store is not 8-byte aligned. The goal is to ensure that STACK_ZERO is properly marked in stack slots and the STACK_ZERO value can propagate properly during the load.
--- .../selftests/bpf/progs/verifier_spill_fill.c | 41 +++++++++++++++++++ 1 file changed, 41 insertions(+)
tools/testing/selftests/bpf/progs/verifier_spill_fill.c +41 -0
@@ -583,6 +583,47 @@ __naked void partial_stack_load_preserves_zeros(void) : __clobber_common); } +SEC("raw_tp") +__log_level(2) +__success +/* fp-4 is STACK_ZERO */ +__msg("2: (62) *(u32 *)(r10 -4) = 0 ; R10=fp0 fp-8=0000????") +__msg("4: (71) r2 = *(u8 *)(r10 -1) ; R2_w=0 R10=fp0 fp-8=0000????") +__msg("5: (0f) r1 += r2") +__msg("mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1") +__msg("mark_precise: frame0: regs=r2 stack= before 4: (71) r2 = *(u8 *)(r10 -1)") +__naked void partial_stack_load_preserves_partial_zeros (void ) +{ + asmvolatile ( +/* fp-4 is value zero */ +".8byte %[fp4_st_zero];" /* LLVM-18+: *(u32 *)(r10 -4) = 0; */ + +/* load single U8 from non-aligned stack zero slot */ +"r1 = %[single_byte_buf];" +"r2 = *(u8 *)(r10 -1);" +"r1 += r2;" +"*(u8 *)(r1 + 0) = r2;" /* this should be fine */ + +/* load single U16 from non-aligned stack zero slot */ +"r1 = %[single_byte_buf];" +"r2 = *(u16 *)(r10 -2);" +"r1 += r2;" +"*(u8 *)(r1 + 0) = r2;" /* this should be fine */ + +/* load single U32 from non-aligned stack zero slot */ +"r1 = %[single_byte_buf];" +"r2 = *(u32 *)(r10 -4);" +"r1 += r2;" +"*(u8 *)(r1 + 0) = r2;" /* this should be fine */ + +"r0 = 0;" +"exit;" + : + : __imm_ptr(single_byte_buf), +__imm_insn (fp4_st_zero,BPF_ST_MEM (BPF_W ,BPF_REG_FP ,-4 ,0 )) + : __clobber_common); +} + char two_byte_buf[2] SEC(".data.two_byte_buf");SEC ("raw_tp" )
Signature · 1 line
2.34.1
From: Yonghong Song <[email protected]>
Date: Tue, 9 Jan 2024 21:13:48 -0800
Quoted 51 lines
With patch set [1], precision backtracing supports register spill/fill to/from the stack. The patch [2] allows initial imprecise register spill with content 0. This is a common case for cpuv3 and lower for initializing the stack variables with pattern
r1 = 0
*(u64 *)(r10 - 8) = r1
and the [2] has demonstrated good verification improvement.For cpuv4, the initialization could be
*(u64 *)(r10 - 8) = 0
The current verifier marks the r10-8 contents withSTACK_ZERO. Similar to [2], let us permit the above insn to behave like imprecise register spill which can reduce number of verified states. The change is in functioncheck_stack_write_fixed_off().Before this patch, spilled zero will be marked as
STACK_ZEROwhich can provide precise values. Incheck_stack_write_var_off(),STACK_ZEROwill be maintained if writing a const zero so later it can provide precise values if needed.The above handling of '*(u64 *)(r10 - 8) = 0' as a spill will have issues in
check_stack_write_var_off()as the spill will be converted toSTACK_MISCand the precise value 0
is lost. To fix this issue, if the spill slots with const zero and theBPF_STwrite also with const zero, the spill slots are preserved, which can later provide precise values
if needed. Without the change incheck_stack_write_var_off(), thetest_verifiersubtest 'BPF_ST_MEMstack imm zero, variable offset' will fail.I checked cpuv3 and cpuv4 with and without this patch with veristat. There is no state change for cpuv3 since '*(u64 *)(r10 - 8) = 0' is only generated with cpuv4.
For cpuv4:
$ ../veristat -C old.cpuv4.csv new.cpuv4.csv -e file,prog,insns,states -f 'insns_diff!=0' File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF) ------------------------------------------ ------------------- --------- --------- --------------- ---------- ---------- ------------- local_storage_bench.bpf.linked3.o get_local 228 168 -60 (-26.32%) 17 14 -3 (-17.65%) pyperf600_bpf_loop.bpf.linked3.o on_event 6066 4889 -1177 (-19.40%) 403 321 -82 (-20.35%) test_cls_redirect.bpf.linked3.o cls_redirect 35483 35387 -96 (-0.27%) 2179 2177 -2 (-0.09%) test_l4lb_noinline.bpf.linked3.o balancer_ingress 4494 4522 +28 (+0.62%) 217 219 +2 (+0.92%) test_l4lb_noinline_dynptr.bpf.linked3.o balancer_ingress 1432 1455 +23 (+1.61%) 92 94 +2 (+2.17%) test_xdp_noinline.bpf.linked3.o balancer_ingress_v6 3462 3458 -4 (-0.12%) 216 216 +0 (+0.00%) verifier_iterating_callbacks.bpf.linked3.o widening 52 41 -11 (-21.15%) 4 3 -1 (-25.00%) xdp_synproxy_kern.bpf.linked3.o syncookie_tc 12412 11719 -693 (-5.58%) 345 330 -15 (-4.35%) xdp_synproxy_kern.bpf.linked3.o syncookie_xdp 12478 11794 -684 (-5.48%) 346 331 -15 (-4.34%)
test_l4lb_noinlineandtest_l4lb_noinline_dynptrhas minor regression, butpyperf600_bpf_loopandlocal_storage_benchgets pretty good improvement.
Quoted 6 lines
[1] https://lore.kernel.org/all/[email protected]/
[2] https://lore.kernel.org/all/[email protected]/Cc Kuniyuki Iwashima <[email protected]>Cc Martin KaFai Lau <[email protected]>Signed-off-by Yonghong Song <[email protected]>
Thanks!
Quoted 63 lines · Yonghong Song
With patch set [1], precision backtracing supports register spill/fill to/from the stack. The patch [2] allows initial imprecise register spill with content 0. This is a common case for cpuv3 and lower for initializing the stack variables with pattern
r1 = 0
*(u64 *)(r10 - 8) = r1
and the [2] has demonstrated good verification improvement.For cpuv4, the initialization could be
*(u64 *)(r10 - 8) = 0
The current verifier marks the r10-8 contents withSTACK_ZERO. Similar to [2], let us permit the above insn to behave like imprecise register spill which can reduce number of verified states. The change is in functioncheck_stack_write_fixed_off().Before this patch, spilled zero will be marked as
STACK_ZEROwhich can provide precise values. Incheck_stack_write_var_off(),STACK_ZEROwill be maintained if writing a const zero so later it can provide precise values if needed.The above handling of '*(u64 *)(r10 - 8) = 0' as a spill will have issues in
check_stack_write_var_off()as the spill will be converted toSTACK_MISCand the precise value 0
is lost. To fix this issue, if the spill slots with const zero and theBPF_STwrite also with const zero, the spill slots are preserved, which can later provide precise values
if needed. Without the change incheck_stack_write_var_off(), thetest_verifiersubtest 'BPF_ST_MEMstack imm zero, variable offset' will fail.I checked cpuv3 and cpuv4 with and without this patch with veristat. There is no state change for cpuv3 since '*(u64 *)(r10 - 8) = 0' is only generated with cpuv4.
For cpuv4:
$ ../veristat -C old.cpuv4.csv new.cpuv4.csv -e file,prog,insns,states -f 'insns_diff!=0' File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF) ------------------------------------------ ------------------- --------- --------- --------------- ---------- ---------- ------------- local_storage_bench.bpf.linked3.o get_local 228 168 -60 (-26.32%) 17 14 -3 (-17.65%) pyperf600_bpf_loop.bpf.linked3.o on_event 6066 4889 -1177 (-19.40%) 403 321 -82 (-20.35%) test_cls_redirect.bpf.linked3.o cls_redirect 35483 35387 -96 (-0.27%) 2179 2177 -2 (-0.09%) test_l4lb_noinline.bpf.linked3.o balancer_ingress 4494 4522 +28 (+0.62%) 217 219 +2 (+0.92%) test_l4lb_noinline_dynptr.bpf.linked3.o balancer_ingress 1432 1455 +23 (+1.61%) 92 94 +2 (+2.17%) test_xdp_noinline.bpf.linked3.o balancer_ingress_v6 3462 3458 -4 (-0.12%) 216 216 +0 (+0.00%) verifier_iterating_callbacks.bpf.linked3.o widening 52 41 -11 (-21.15%) 4 3 -1 (-25.00%) xdp_synproxy_kern.bpf.linked3.o syncookie_tc 12412 11719 -693 (-5.58%) 345 330 -15 (-4.35%) xdp_synproxy_kern.bpf.linked3.o syncookie_xdp 12478 11794 -684 (-5.48%) 346 331 -15 (-4.34%)
test_l4lb_noinlineandtest_l4lb_noinline_dynptrhas minor regression, butpyperf600_bpf_loopandlocal_storage_benchgets pretty good improvement.[1] https://lore.kernel.org/all/[email protected]/
[2] https://lore.kernel.org/all/[email protected]/Cc Kuniyuki Iwashima <[email protected]>Cc Martin KaFai Lau <[email protected]>Signed-off-by Yonghong Song <[email protected]>--- kernel/bpf/verifier.c | 17 +++++++++++++++-- .../selftests/bpf/progs/verifier_spill_fill.c | 16 ++++++++-------- 2 files changed, 23 insertions(+), 10 deletions(-)
Quoted 13 lines
Changelogs:
v3 -> v4:
- add missed SPILL slot check incheck_stack_write_var_off().
- remove incorrect comments in the new test.
v2 -> v3:
- add precision checking to the spilled zero value register incheck_stack_write_var_off().
- check spill slot-by-slot instead of in a bunch within a spi.
v1 -> v2:
- Preserve with-const-zero spill if writing is also zero incheck_stack_write_var_off().
- Add a test with not-8-byte-alignedBPF_STstore.
LGTM, thanks
Quoted 96 lines
kernel/bpf/verifier.c +15
-2@@ -4493,7 +4493,7 @@ static int check_stack_write_fixed_off(struct bpf_verifier_env *env,if (fls64 (reg->umax_value) >BITS_PER_BYTE * size) state->stack[spi].spilled_ptr.id =0 ; }else if (!reg && !(off %BPF_REG_SIZE ) &&is_bpf_st_mem (insn) && - insn->imm !=0 && env->bpf_capable) { + env->bpf_capable) {struct bpf_reg_state fake_reg = {};__mark_reg_known (&fake_reg, insn->imm);@@ -4640,7 +4640,20 @@ static int check_stack_write_var_off(struct bpf_verifier_env *env,return -EINVAL ; } -/* Erase all spilled pointers. */ +/* If writing_zero and the spi slot contains a spill of value 0, +* maintain the spill type. +*/ +if (writing_zero && *stype ==STACK_SPILL && +is_spilled_scalar_reg (&state->stack[spi])) { +struct bpf_reg_state *spill_reg = &state->stack[spi].spilled_ptr; + +if (tnum_is_const (spill_reg->var_off) && spill_reg->var_off.value ==0 ) { + zero_used = true; +continue ; + } + } + +/* Erase all other spilled pointers. */ state->stack[spi].spilled_ptr.type =NOT_INIT ;/* Update the slot type. */ tools/testing/selftests/bpf/progs/verifier_spill_fill.c +8
-9@@ -495,14 +495,14 @@ char single_byte_buf[1] SEC(".data.single_byte_buf"); SEC("raw_tp") __log_level(2) __success -/* make sure fp-8 is all STACK_ZERO */ -__msg("2: (7a) *(u64 *)(r10 -8) = 0 ; R10=fp0 fp-8_w=00000000") +/* fp-8 is spilled IMPRECISE value zero (represented by a zero value fake reg) */ +__msg("2: (7a) *(u64 *)(r10 -8) = 0 ; R10=fp0 fp-8_w=0")/* but fp-16 is spilled IMPRECISE zero const reg */ __msg ("4: (7b) *(u64 *)(r10 -16) = r0 ; R0_w=0 R10=fp0 fp-16_w=0" ) -/* validate that assigning R2 from STACK_ZERO doesn't mark register +/* validate that assigning R2 from STACK_SPILL with zero value doesn't mark register * precise immediately; if necessary, it will be marked precise later */ -__msg ("6: (71) r2 = *(u8 *)(r10 -1) ; R2_w=0 R10=fp0 fp-8_w=00000000" ) +__msg ("6: (71) r2 = *(u8 *)(r10 -1) ; R2_w=0 R10=fp0 fp-8_w=0" )/* similarly, when R2 is assigned from spilled register, it is initially * imprecise, but will be marked precise later once it is used in precise context */ @@ -520,14 +520,14 @@ __msg("mark_precise: frame0: regs=r0 stack= before 3: (b7) r0 = 0")__naked void partial_stack_load_preserves_zeros (void ) { asmvolatile ( -/* fp-8 is all STACK_ZERO */ +/* fp-8 is value zero (represented by a zero value fake reg) */ ".8byte %[fp8_st_zero];" /* LLVM-18+: *(u64 *)(r10 -8) = 0; */ /* fp-16 is const zero register */ "r0 = 0;" "*(u64 *)(r10 -16) = r0;" -/* load single U8 from non-aligned STACK_ZERO slot */ +/* load single U8 from non-aligned spilled value zero slot */ "r1 = %[single_byte_buf];" "r2 = *(u8 *)(r10 -1);" "r1 += r2;"@@ -539,7 +539,7 @@ __naked void partial_stack_load_preserves_zeros(void)"r1 += r2;" "*(u8 *)(r1 + 0) = r2;" /* this should be fine */ -/* load single U16 from non-aligned STACK_ZERO slot */ +/* load single U16 from non-aligned spilled value zero slot */ "r1 = %[single_byte_buf];" "r2 = *(u16 *)(r10 -2);" "r1 += r2;" @@ -551,7 +551,7 @@ __naked void partial_stack_load_preserves_zeros(void)"r1 += r2;" "*(u8 *)(r1 + 0) = r2;" /* this should be fine */ -/* load single U32 from non-aligned STACK_ZERO slot */ +/* load single U32 from non-aligned spilled value zero slot */ "r1 = %[single_byte_buf];" "r2 = *(u32 *)(r10 -4);" "r1 += r2;" --2.34.1
This series was applied to bpf/bpf-next.git (master) by Alexei Starovoitov <[email protected]>:
Hello:
This series was applied to bpf/bpf-next.git (master) by Alexei Starovoitov <[email protected]>:
Quoted 9 lines · On Tue, 9 Jan 2024 21:13:48 -0800 you wrote:
With patch set [1], precision backtracing supports register spill/fill to/from the stack. The patch [2] allows initial imprecise register spill with content 0. This is a common case for cpuv3 and lower for initializing the stack variables with pattern
r1 = 0
*(u64 *)(r10 - 8) = r1
and the [2] has demonstrated good verification improvement.[...]
Here is the summary with links:
- [bpf-next,v4,1/2] bpf: Track aligned st store as imprecise spilled registers
https://git.kernel.org/bpf/bpf-next/c/17e25d8e59f2 - [bpf-next,v4,2/2] selftests/bpf: Add a selftest with not-8-byte aligned BPF_ST https://git.kernel.org/bpf/bpf-next/c/536dfcbad359
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html