mm, lru_gen: batch update pages when aging
Subsystems (3)
v2 cover mm, lru_gen: batch update pages when aging
From: Kairui Song <[email protected]>
Hi, this is updated version of previous series:
https://lore.kernel.org/linux-mm/[email protected]/
Currently when MGLRU ages, it moves the pages one by one and updates mm counter page by page, which is correct but the overhead can be optimized by batching these operations.
In pervious series I only test with memtier which didn't show a good enough improment. Acutally in-mem fio benifits the most from patch 3:
Ramdisk fio test in a 4G memcg on a EPYC 7K62 with:
fio -name=mglru --numjobs=16 --directory=/mnt --size=960m \
--buffered=1 --ioengine=io_uring --iodepth=128 \
--iodepth_batch_submit=32 --iodepth_batch_complete=32 \
--rw=randread --random_distribution=zipf:0.5 --norandommap \
--time_based --ramp_time=1m --runtime=5m --group_reportingBefore this series:
bw ( MiB/s): min= 7644, max= 9293, per=100.00%, avg=8777.77, stdev=16.59, samples=9568
iops : min=1956954, max=2379053, avg=2247108.51, stdev=4247.22, samples=9568
After this series (+7.5%):
bw ( MiB/s): min= 8462, max= 9902, per=100.00%, avg=9444.77, stdev=16.43, samples=9568
iops : min=2166433, max=2535135, avg=2417858.23, stdev=4205.15, samples=9568
However it's highly related to the actual timing and use case.
Besides, batch moving also has a good effect on LRU ordering. Currently when MGLRU ages, it walks the LRU backward, and the protected pages are moved to the tail of newer gen one by one, which reverses the order of pages in LRU. Moving them in batches can help keep their order, only in a small scope though due to the scan limit of MAX_LRU_BATCH pages.
I noticed a higher performance gain if there are a lot of pages getting protected, but hard to reproduce, so instead I tested using a simpler benchmark, memtier, also for a more generic result. The main overhead here is not aging but the result is also looking good:
Average result of 18 test runs:
Before: 44017.78 Ops/sec After patch 1-3: 44890.50 Ops/sec (+1.8%)
Some more test result in commit messages.
Kairui Song (3):
mm, lru_gen: batch update counters on againg mm, lru_gen: move pages in bulk when aging
mm, lru_gen: try to prefetch next page when canning LRU
mm/vmscan.c | 140 ++++++++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 124 insertions(+), 16 deletions(-)
Signature · 1 line
2.43.0
PATCH v2 1/3 mm, lru_gen: batch update counters on againg
From: Kairui Song <[email protected]>
When lru_gen is aging, it will update mm counters page by page, which causes a higher overhead if age happens frequently or there are a lot of pages in one generation getting moved. Optimize this by doing the counter update in batch.
Although most __mod_*_state has its own caches the overhead is still observable.
Tested in a 4G memcg on a EPYC 7K62 with:
memcached -u nobody -m 16384 -s /tmp/memcached.socket \
-a 0766 -t 16 -B binary &
memtier_benchmark -S /tmp/memcached.socket \
-P memcache_binary -n allkeys \
--key-minimum=1 --key-maximum=16000000 -d 1024 \
--ratio=1:0 --key-pattern=P:P -c 2 -t 16 --pipeline 8 -x 6Average result of 18 test runs:
Before: 44017.78 Ops/sec After: 44687.08 Ops/sec (+1.5%)
--- mm/vmscan.c | 64 +++++++++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 55 insertions(+), 9 deletions(-)
mm/vmscan.c +55 -9
@@ -3113,9 +3113,47 @@ static int folio_update_gen(struct folio *folio, int gen)return ((old_flags &LRU_GEN_MASK ) >>LRU_GEN_PGOFF ) -1 ; } +/* +* Update LRU gen in batch for each lru_gen LRU list. The batch is limited to +* each gen / type / zone level LRU. Batch is applied after finished or aborted +* scanning one LRU list. +*/ +struct gen_update_batch { +int delta[MAX_NR_GENS ]; +}; + +static void lru_gen_update_batch (struct lruvec *lruvec,int type,int zone, +struct gen_update_batch *batch) +{ +int gen; +int promoted =0 ; +struct lru_gen_folio *lrugen = &lruvec->lrugen; +enum lru_list lru = type ?LRU_INACTIVE_FILE :LRU_INACTIVE_ANON ; + +for (gen =0 ; gen <MAX_NR_GENS ; gen++) { +int delta = batch->delta[gen]; + +if (!delta) +continue ; + +WRITE_ONCE (lrugen->nr_pages[gen][type][zone], + lrugen->nr_pages[gen][type][zone] + delta); + +if (lru_gen_is_active (lruvec, gen)) + promoted += delta; + } + +if (promoted) { +__update_lru_size (lruvec, lru, zone, -promoted); +__update_lru_size (lruvec, lru +LRU_ACTIVE , zone, promoted); + } +} +/* protect pages accessed multiple times through file descriptors */ -static int folio_inc_gen (struct lruvec *lruvec,struct folio *folio,bool reclaiming) +static int folio_inc_gen (struct lruvec *lruvec,struct folio *folio, +bool reclaiming,struct gen_update_batch *batch) { +int delta =folio_nr_pages (folio);int type =folio_is_file_lru (folio);struct lru_gen_folio *lrugen = &lruvec->lrugen;int new_gen, old_gen =lru_gen_from_seq (lrugen->min_seq[type]);
@@ -3138,7 +3176,8 @@ static int folio_inc_gen(struct lruvec *lruvec, struct folio *folio, bool reclai new_flags |=BIT (PG_reclaim); }while (!try_cmpxchg (&folio->flags, &old_flags, new_flags)); -lru_gen_update_size (lruvec, folio, old_gen, new_gen); + batch->delta[old_gen] -= delta; + batch->delta[new_gen] += delta;return new_gen; }
@@ -3672,6 +3711,7 @@ static bool inc_min_seq(struct lruvec *lruvec, int type, bool can_swap) {int zone;int remaining =MAX_LRU_BATCH ; +struct gen_update_batch batch = { };struct lru_gen_folio *lrugen = &lruvec->lrugen;int new_gen, old_gen =lru_gen_from_seq (lrugen->min_seq[type]);
@@ -3690,12 +3730,15 @@ static bool inc_min_seq(struct lruvec *lruvec, int type, bool can_swap)VM_WARN_ON_ONCE_FOLIO (folio_is_file_lru (folio) != type, folio);VM_WARN_ON_ONCE_FOLIO (folio_zonenum (folio) != zone, folio); - new_gen =folio_inc_gen (lruvec, folio, false); + new_gen =folio_inc_gen (lruvec, folio, false, &batch);list_move_tail (&folio->lru, &lrugen->folios[new_gen][type][zone]); -if (!--remaining) +if (!--remaining) { +lru_gen_update_batch (lruvec, type, zone, &batch);return false; + } } +lru_gen_update_batch (lruvec, type, zone, &batch); } done:reset_ctrl_pos (lruvec, type, true);
@@ -4215,7 +4258,7 @@ void lru_gen_soft_reclaim(struct mem_cgroup *memcg, int nid)******************************************************************************/ static bool sort_folio (struct lruvec *lruvec,struct folio *folio,struct scan_control *sc, -int tier_idx) +int tier_idx,struct gen_update_batch *batch) {bool success;int gen =folio_lru_gen (folio);
@@ -4257,7 +4300,7 @@ static bool sort_folio(struct lruvec *lruvec, struct folio *folio, struct scan_cif (tier > tier_idx || refs ==BIT (LRU_REFS_WIDTH )) {int hist =lru_hist_from_seq (lrugen->min_seq[type]); - gen =folio_inc_gen (lruvec, folio, false); + gen =folio_inc_gen (lruvec, folio, false, batch);list_move_tail (&folio->lru, &lrugen->folios[gen][type][zone]); WRITE_ONCE(lrugen->protected[hist][type][tier - 1],
@@ -4267,7 +4310,7 @@ static bool sort_folio(struct lruvec *lruvec, struct folio *folio, struct scan_c/* ineligible */ if (zone > sc->reclaim_idx ||skip_cma (folio, sc)) { - gen =folio_inc_gen (lruvec, folio, false); + gen =folio_inc_gen (lruvec, folio, false, batch);list_move_tail (&folio->lru, &lrugen->folios[gen][type][zone]);return true; }
@@ -4275,7 +4318,7 @@ static bool sort_folio(struct lruvec *lruvec, struct folio *folio, struct scan_c/* waiting for writeback */ if (folio_test_locked (folio) ||folio_test_writeback (folio) || (type ==LRU_GEN_FILE &&folio_test_dirty (folio))) { - gen =folio_inc_gen (lruvec, folio, true); + gen =folio_inc_gen (lruvec, folio, true, batch);list_move (&folio->lru, &lrugen->folios[gen][type][zone]);return true; }
@@ -4341,6 +4384,7 @@ static int scan_folios(struct lruvec *lruvec, struct scan_control *sc,for (i =MAX_NR_ZONES ; i >0 ; i--) {LIST_HEAD (moved);int skipped_zone =0 ; +struct gen_update_batch batch = { };int zone = (sc->reclaim_idx + i) %MAX_NR_ZONES ;struct list_head *head = &lrugen->folios[gen][type][zone];
@@ -4355,7 +4399,7 @@ static int scan_folios(struct lruvec *lruvec, struct scan_control *sc, scanned += delta; -if (sort_folio (lruvec, folio, sc, tier)) +if (sort_folio (lruvec, folio, sc, tier, &batch)) sorted += delta;else if (isolate_folio (lruvec, folio, sc)) {list_add (&folio->lru, list);
@@ -4375,6 +4419,8 @@ static int scan_folios(struct lruvec *lruvec, struct scan_control *sc, skipped += skipped_zone; } +lru_gen_update_batch (lruvec, type, zone, &batch); +if (!remaining || isolated >=MIN_LRU_BATCH )break ; }
Signature · 1 line
2.43.0
Re: [PATCH v2 1/3] mm, lru_gen: batch update counters on againg
Quoted 23 lines · Kairui Song <[email protected]> 于2024年1月12日周五 02:33写道:
From: Kairui Song <[email protected]>
When
lru_genis aging, it will update mm counters page by page, which causes a higher overhead if age happens frequently or there are a lot of pages in one generation getting moved. Optimize this by doing the counter update in batch.Although most __mod_*_state has its own caches the overhead is still observable.
Tested in a 4G memcg on a EPYC 7K62 with:
memcached -u nobody -m 16384 -s /tmp/memcached.socket \ -a 0766 -t 16 -B binary & memtier_benchmark -S /tmp/memcached.socket \ -P memcache_binary -n allkeys \ --key-minimum=1 --key-maximum=16000000 -d 1024 \ --ratio=1:0 --key-pattern=P:P -c 2 -t 16 --pipeline 8 -x 6Average result of 18 test runs:
Quoted 8 lines
Before: 44017.78 Ops/sec After: 44687.08 Ops/sec (+1.5%)Signed-off-by Kairui Song <[email protected]>--- mm/vmscan.c | 64 +++++++++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 55 insertions(+), 9 deletions(-)
My apology for being careless again here... the title here should be:
mm, lru_gen: batch update counters on aging
Wei Xu
reviewerRe: [PATCH v2 1/3] mm, lru_gen: batch update counters on againg
In reply to Kairui SongQuoted 21 lines · Kairui Song
From: Kairui Song <[email protected]>
When
lru_genis aging, it will update mm counters page by page, which causes a higher overhead if age happens frequently or there are a lot of pages in one generation getting moved. Optimize this by doing the counter update in batch.Although most __mod_*_state has its own caches the overhead is still observable.
Tested in a 4G memcg on a EPYC 7K62 with:
memcached -u nobody -m 16384 -s /tmp/memcached.socket \ -a 0766 -t 16 -B binary & memtier_benchmark -S /tmp/memcached.socket \ -P memcache_binary -n allkeys \ --key-minimum=1 --key-maximum=16000000 -d 1024 \ --ratio=1:0 --key-pattern=P:P -c 2 -t 16 --pipeline 8 -x 6
Quoted 4 lines
Average result of 18 test runs:
Before: 44017.78 Ops/sec After: 44687.08 Ops/sec (+1.5%)
I see the same performance numbers get quoted in all the 3 patches. How much performance improvements does this particular patch provide (the same for the other 2 patches)? If as the cover letter says, the most performance benefits come from patch 3 (prefetching), can we just have that patch alone to avoid the extra complexities.
Quoted 69 lines
Signed-off-by Kairui Song <[email protected]>--- mm/vmscan.c | 64 +++++++++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 55 insertions(+), 9 deletions(-)mm/vmscan.c +41
-2@@ -3113,9 +3113,47 @@ static int folio_update_gen(struct folio *folio, int gen)return ((old_flags &LRU_GEN_MASK ) >>LRU_GEN_PGOFF ) -1 ; } +/* +* Update LRU gen in batch for each lru_gen LRU list. The batch is limited to +* each gen / type / zone level LRU. Batch is applied after finished or aborted +* scanning one LRU list. +*/ +struct gen_update_batch { +int delta[MAX_NR_GENS ]; +}; + +static void lru_gen_update_batch (struct lruvec *lruvec,int type,int zone, +struct gen_update_batch *batch) +{ +int gen; +int promoted =0 ; +struct lru_gen_folio *lrugen = &lruvec->lrugen; +enum lru_list lru = type ?LRU_INACTIVE_FILE :LRU_INACTIVE_ANON ; + +for (gen =0 ; gen <MAX_NR_GENS ; gen++) { +int delta = batch->delta[gen]; + +if (!delta) +continue ; + +WRITE_ONCE (lrugen->nr_pages[gen][type][zone], + lrugen->nr_pages[gen][type][zone] + delta); + +if (lru_gen_is_active (lruvec, gen)) + promoted += delta; + } + +if (promoted) { +__update_lru_size (lruvec, lru, zone, -promoted); +__update_lru_size (lruvec, lru +LRU_ACTIVE , zone, promoted); + } +} +/* protect pages accessed multiple times through file descriptors */ -static int folio_inc_gen (struct lruvec *lruvec,struct folio *folio,bool reclaiming) +static int folio_inc_gen (struct lruvec *lruvec,struct folio *folio, +bool reclaiming,struct gen_update_batch *batch) { +int delta =folio_nr_pages (folio);int type =folio_is_file_lru (folio);struct lru_gen_folio *lrugen = &lruvec->lrugen;int new_gen, old_gen =lru_gen_from_seq (lrugen->min_seq[type]);@@ -3138,7 +3176,8 @@ static int folio_inc_gen(struct lruvec *lruvec, struct folio *folio, bool reclai new_flags |=BIT (PG_reclaim); }while (!try_cmpxchg (&folio->flags, &old_flags, new_flags)); -lru_gen_update_size (lruvec, folio, old_gen, new_gen); + batch->delta[old_gen] -= delta; + batch->delta[new_gen] += delta;return new_gen; }
mm/vmscan.c static bool inc_min_seq(struct lruvec *lruvec, int type, bool can_swap) · line 3714
Quoted 4 lines
mm/vmscan.c +1
-0@@ -3672,6 +3711,7 @@ static bool inc_min_seq(struct lruvec *lruvec, int type, bool can_swap) {int zone;int remaining =MAX_LRU_BATCH ; +struct gen_update_batch batch = { };
Can this batch variable be moved away from the stack? We (Google) use a much larger value for MAX_NR_GENS internally. This large stack allocation from "struct gen_update_batch batch" can significantly increase the risk of stack overflow for our use cases.
Quoted 87 lines
mm/vmscan.c +13
-8struct lru_gen_folio *lrugen = &lruvec->lrugen;int new_gen, old_gen =lru_gen_from_seq (lrugen->min_seq[type]);@@ -3690,12 +3730,15 @@ static bool inc_min_seq(struct lruvec *lruvec, int type, bool can_swap)VM_WARN_ON_ONCE_FOLIO (folio_is_file_lru (folio) != type, folio);VM_WARN_ON_ONCE_FOLIO (folio_zonenum (folio) != zone, folio); - new_gen =folio_inc_gen (lruvec, folio, false); + new_gen =folio_inc_gen (lruvec, folio, false, &batch);list_move_tail (&folio->lru, &lrugen->folios[new_gen][type][zone]); -if (!--remaining) +if (!--remaining) { +lru_gen_update_batch (lruvec, type, zone, &batch);return false; + } } +lru_gen_update_batch (lruvec, type, zone, &batch); } done:reset_ctrl_pos (lruvec, type, true);@@ -4215,7 +4258,7 @@ void lru_gen_soft_reclaim(struct mem_cgroup *memcg, int nid)******************************************************************************/ static bool sort_folio (struct lruvec *lruvec,struct folio *folio,struct scan_control *sc, -int tier_idx) +int tier_idx,struct gen_update_batch *batch) {bool success;int gen =folio_lru_gen (folio);@@ -4257,7 +4300,7 @@ static bool sort_folio(struct lruvec *lruvec, struct folio *folio, struct scan_cif (tier > tier_idx || refs ==BIT (LRU_REFS_WIDTH )) {int hist =lru_hist_from_seq (lrugen->min_seq[type]); - gen =folio_inc_gen (lruvec, folio, false); + gen =folio_inc_gen (lruvec, folio, false, batch);list_move_tail (&folio->lru, &lrugen->folios[gen][type][zone]); WRITE_ONCE(lrugen->protected[hist][type][tier - 1],@@ -4267,7 +4310,7 @@ static bool sort_folio(struct lruvec *lruvec, struct folio *folio, struct scan_c/* ineligible */ if (zone > sc->reclaim_idx ||skip_cma (folio, sc)) { - gen =folio_inc_gen (lruvec, folio, false); + gen =folio_inc_gen (lruvec, folio, false, batch);list_move_tail (&folio->lru, &lrugen->folios[gen][type][zone]);return true; }@@ -4275,7 +4318,7 @@ static bool sort_folio(struct lruvec *lruvec, struct folio *folio, struct scan_c/* waiting for writeback */ if (folio_test_locked (folio) ||folio_test_writeback (folio) || (type ==LRU_GEN_FILE &&folio_test_dirty (folio))) { - gen =folio_inc_gen (lruvec, folio, true); + gen =folio_inc_gen (lruvec, folio, true, batch);list_move (&folio->lru, &lrugen->folios[gen][type][zone]);return true; }@@ -4341,6 +4384,7 @@ static int scan_folios(struct lruvec *lruvec, struct scan_control *sc,for (i =MAX_NR_ZONES ; i >0 ; i--) {LIST_HEAD (moved);int skipped_zone =0 ; +struct gen_update_batch batch = { };int zone = (sc->reclaim_idx + i) %MAX_NR_ZONES ;struct list_head *head = &lrugen->folios[gen][type][zone];@@ -4355,7 +4399,7 @@ static int scan_folios(struct lruvec *lruvec, struct scan_control *sc, scanned += delta; -if (sort_folio (lruvec, folio, sc, tier)) +if (sort_folio (lruvec, folio, sc, tier, &batch)) sorted += delta;else if (isolate_folio (lruvec, folio, sc)) {list_add (&folio->lru, list);@@ -4375,6 +4419,8 @@ static int scan_folios(struct lruvec *lruvec, struct scan_control *sc, skipped += skipped_zone; } +lru_gen_update_batch (lruvec, type, zone, &batch); +if (!remaining || isolated >=MIN_LRU_BATCH )break ; } --2.43.0
Re: [PATCH v2 1/3] mm, lru_gen: batch update counters on againg
Quoted 25 lines · Wei Xu <[email protected]> 于2024年1月13日周六 05:01写道:
Quoted 23 lines · Kairui Song
From: Kairui Song <[email protected]>
When
lru_genis aging, it will update mm counters page by page, which causes a higher overhead if age happens frequently or there are a lot of pages in one generation getting moved. Optimize this by doing the counter update in batch.Although most __mod_*_state has its own caches the overhead is still observable.
Tested in a 4G memcg on a EPYC 7K62 with:
memcached -u nobody -m 16384 -s /tmp/memcached.socket \ -a 0766 -t 16 -B binary & memtier_benchmark -S /tmp/memcached.socket \ -P memcache_binary -n allkeys \ --key-minimum=1 --key-maximum=16000000 -d 1024 \ --ratio=1:0 --key-pattern=P:P -c 2 -t 16 --pipeline 8 -x 6Average result of 18 test runs:
Quoted 8 lines
Quoted 2 lines
Before: 44017.78 Ops/sec After: 44687.08 Ops/sec (+1.5%)I see the same performance numbers get quoted in all the 3 patches. How much performance improvements does this particular patch provide (the same for the other 2 patches)? If as the cover letter says, the most performance benefits come from patch 3 (prefetching), can we just have that patch alone to avoid the extra complexities.
Hi Wei,
Indeed these are two different optimization technique, I can reorder the series, prefetch is the first one and should be more acceptable, other optimizations can come later. And add standalone info about improvement of batch operations.
Quoted 67 lines
Quoted 67 lines
Signed-off-by Kairui Song <[email protected]>--- mm/vmscan.c | 64 +++++++++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 55 insertions(+), 9 deletions(-)mm/vmscan.c +41
-2@@ -3113,9 +3113,47 @@ static int folio_update_gen(struct folio *folio, int gen)return ((old_flags &LRU_GEN_MASK ) >>LRU_GEN_PGOFF ) -1 ; } +/* +* Update LRU gen in batch for each lru_gen LRU list. The batch is limited to +* each gen / type / zone level LRU. Batch is applied after finished or aborted +* scanning one LRU list. +*/ +struct gen_update_batch { +int delta[MAX_NR_GENS ]; +}; + +static void lru_gen_update_batch (struct lruvec *lruvec,int type,int zone, +struct gen_update_batch *batch) +{ +int gen; +int promoted =0 ; +struct lru_gen_folio *lrugen = &lruvec->lrugen; +enum lru_list lru = type ?LRU_INACTIVE_FILE :LRU_INACTIVE_ANON ; + +for (gen =0 ; gen <MAX_NR_GENS ; gen++) { +int delta = batch->delta[gen]; + +if (!delta) +continue ; + +WRITE_ONCE (lrugen->nr_pages[gen][type][zone], + lrugen->nr_pages[gen][type][zone] + delta); + +if (lru_gen_is_active (lruvec, gen)) + promoted += delta; + } + +if (promoted) { +__update_lru_size (lruvec, lru, zone, -promoted); +__update_lru_size (lruvec, lru +LRU_ACTIVE , zone, promoted); + } +} +/* protect pages accessed multiple times through file descriptors */ -static int folio_inc_gen (struct lruvec *lruvec,struct folio *folio,bool reclaiming) +static int folio_inc_gen (struct lruvec *lruvec,struct folio *folio, +bool reclaiming,struct gen_update_batch *batch) { +int delta =folio_nr_pages (folio);int type =folio_is_file_lru (folio);struct lru_gen_folio *lrugen = &lruvec->lrugen;int new_gen, old_gen =lru_gen_from_seq (lrugen->min_seq[type]);@@ -3138,7 +3176,8 @@ static int folio_inc_gen(struct lruvec *lruvec, struct folio *folio, bool reclai new_flags |=BIT (PG_reclaim); }while (!try_cmpxchg (&folio->flags, &old_flags, new_flags)); -lru_gen_update_size (lruvec, folio, old_gen, new_gen); + batch->delta[old_gen] -= delta; + batch->delta[new_gen] += delta;
Quoted 13 lines
mm/vmscan.c static bool inc_min_seq(struct lruvec *lruvec, int type, bool can_swap) · line 3714
Quoted 7 lines
mm/vmscan.c +1
-0return new_gen; }@@ -3672,6 +3711,7 @@ static bool inc_min_seq(struct lruvec *lruvec, int type, bool can_swap) {int zone;int remaining =MAX_LRU_BATCH ; +struct gen_update_batch batch = { };Can this batch variable be moved away from the stack? We (Google) use a much larger value for
MAX_NR_GENSinternally. This large stack allocation from "structgen_update_batchbatch" can significantly increase the risk of stack overflow for our use cases.
Thanks for the info.
Do you have any suggestion about where we should put the batch info? I though about merging it with lru_gen_mm_walk but that depend on kzalloc and not useable for slow allocation path, the overhead could be larger than benefit in many cases.
Not sure if we can use some thing like a preallocated per-cpu cache here to avoid all the issues.
Re: [PATCH v2 1/3] mm, lru_gen: batch update counters on againg
Quoted 124 lines · Kairui Song <[email protected]> 于2024年1月15日周一 01:42写道:
Quoted 25 lines · Wei Xu <[email protected]> 于2024年1月13日周六 05:01写道:
Quoted 23 lines · Kairui Song
From: Kairui Song <[email protected]>
When
lru_genis aging, it will update mm counters page by page, which causes a higher overhead if age happens frequently or there are a lot of pages in one generation getting moved. Optimize this by doing the counter update in batch.Although most __mod_*_state has its own caches the overhead is still observable.
Tested in a 4G memcg on a EPYC 7K62 with:
memcached -u nobody -m 16384 -s /tmp/memcached.socket \ -a 0766 -t 16 -B binary & memtier_benchmark -S /tmp/memcached.socket \ -P memcache_binary -n allkeys \ --key-minimum=1 --key-maximum=16000000 -d 1024 \ --ratio=1:0 --key-pattern=P:P -c 2 -t 16 --pipeline 8 -x 6Average result of 18 test runs:
Quoted 8 lines
Quoted 2 lines
Before: 44017.78 Ops/sec After: 44687.08 Ops/sec (+1.5%)I see the same performance numbers get quoted in all the 3 patches. How much performance improvements does this particular patch provide (the same for the other 2 patches)? If as the cover letter says, the most performance benefits come from patch 3 (prefetching), can we just have that patch alone to avoid the extra complexities.
Hi Wei,
Indeed these are two different optimization technique, I can reorder the series, prefetch is the first one and should be more acceptable, other optimizations can come later. And add standalone info about improvement of batch operations.
Quoted 67 lines
Quoted 67 lines
Signed-off-by Kairui Song <[email protected]>--- mm/vmscan.c | 64 +++++++++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 55 insertions(+), 9 deletions(-)mm/vmscan.c +41
-2@@ -3113,9 +3113,47 @@ static int folio_update_gen(struct folio *folio, int gen)return ((old_flags &LRU_GEN_MASK ) >>LRU_GEN_PGOFF ) -1 ; } +/* +* Update LRU gen in batch for each lru_gen LRU list. The batch is limited to +* each gen / type / zone level LRU. Batch is applied after finished or aborted +* scanning one LRU list. +*/ +struct gen_update_batch { +int delta[MAX_NR_GENS ]; +}; + +static void lru_gen_update_batch (struct lruvec *lruvec,int type,int zone, +struct gen_update_batch *batch) +{ +int gen; +int promoted =0 ; +struct lru_gen_folio *lrugen = &lruvec->lrugen; +enum lru_list lru = type ?LRU_INACTIVE_FILE :LRU_INACTIVE_ANON ; + +for (gen =0 ; gen <MAX_NR_GENS ; gen++) { +int delta = batch->delta[gen]; + +if (!delta) +continue ; + +WRITE_ONCE (lrugen->nr_pages[gen][type][zone], + lrugen->nr_pages[gen][type][zone] + delta); + +if (lru_gen_is_active (lruvec, gen)) + promoted += delta; + } + +if (promoted) { +__update_lru_size (lruvec, lru, zone, -promoted); +__update_lru_size (lruvec, lru +LRU_ACTIVE , zone, promoted); + } +} +/* protect pages accessed multiple times through file descriptors */ -static int folio_inc_gen (struct lruvec *lruvec,struct folio *folio,bool reclaiming) +static int folio_inc_gen (struct lruvec *lruvec,struct folio *folio, +bool reclaiming,struct gen_update_batch *batch) { +int delta =folio_nr_pages (folio);int type =folio_is_file_lru (folio);struct lru_gen_folio *lrugen = &lruvec->lrugen;int new_gen, old_gen =lru_gen_from_seq (lrugen->min_seq[type]);@@ -3138,7 +3176,8 @@ static int folio_inc_gen(struct lruvec *lruvec, struct folio *folio, bool reclai new_flags |=BIT (PG_reclaim); }while (!try_cmpxchg (&folio->flags, &old_flags, new_flags)); -lru_gen_update_size (lruvec, folio, old_gen, new_gen); + batch->delta[old_gen] -= delta; + batch->delta[new_gen] += delta;Quoted 13 lines
mm/vmscan.c static bool inc_min_seq(struct lruvec *lruvec, int type, bool can_swap) · line 3714
Quoted 7 lines
mm/vmscan.c +1
-0return new_gen; }@@ -3672,6 +3711,7 @@ static bool inc_min_seq(struct lruvec *lruvec, int type, bool can_swap) {int zone;int remaining =MAX_LRU_BATCH ; +struct gen_update_batch batch = { };Can this batch variable be moved away from the stack? We (Google) use a much larger value for
MAX_NR_GENSinternally. This large stack allocation from "structgen_update_batchbatch" can significantly increase the risk of stack overflow for our use cases.
Quoted 8 lines
Thanks for the info.
Do you have any suggestion about where we should put the batch info? I though about merging it withlru_gen_mm_walkbut that depend on kzalloc and not useable for slow allocation path, the overhead could be larger than benefit in many cases.Not sure if we can use some thing like a preallocated per-cpu cache here to avoid all the issues.
Hi Wei,
After second thought, the batch is mostly used together with folio_inc_gen which means most pages are only being moved between two gens (being protected/unreclaimable), so I think only one counter int is needed in the batch, I'll update this patch and do some test based on this.
PATCH v2 2/3 mm, lru_gen: move pages in bulk when aging
In reply to Kairui SongFrom: Kairui Song <[email protected]>
Another overhead of aging is page moving. Actually, in most cases, pages are being moved to the same gen after folio_inc_gen is called, especially the protected pages. So it's better to move them in bulk.
This also has a good effect on LRU order. Currently when MGLRU ages, it walks the LRU backwards, and the protected pages are moved to the tail of newer gen one by one, which actually reverses the order of pages in LRU. Moving them in batches can help keep their order, only in a small scope though, due to the scan limit of MAX_LRU_BATCH pages.
After this commit, we can see a slight performance gain (with CONFIG_DEBUG_LIST=n):
Test 1: of memcached in a 4G memcg on a EPYC 7K62 with:
memcached -u nobody -m 16384 -s /tmp/memcached.socket \
-a 0766 -t 16 -B binary &
memtier_benchmark -S /tmp/memcached.socket \
-P memcache_binary -n allkeys \
--key-minimum=1 --key-maximum=16000000 -d 1024 \
--ratio=1:0 --key-pattern=P:P -c 2 -t 16 --pipeline 8 -x 6Average result of 18 test runs:
Before: 44017.78 Ops/sec After patch 1-2: 44810.01 Ops/sec (+1.8%)
Test 2: MySQL in 6G memcg with:
echo 'set GLOBAL innodb_buffer_pool_size=16106127360;' | \
mysql -u USER -h localhost --password=PASS
sysbench /usr/share/sysbench/oltp_read_only.lua \
--mysql-user=USER --mysql-password=PASS --mysql-db=sb\
--tables=48 --table-size=2000000 --threads=16 --time=1800\
--report-interval=5 runQPS of 6 test runs:
Before:
134126.83
134352.13
134045.19
133985.12
134787.47
134554.43
After patch 1-2 (+0.4%):
134913.38
134695.35
134891.31
134662.66
135090.32
134901.14
Only about 10% CPU time is spent in kernel space for MySQL test so the improvement is very trivial.
There could be a higher performance gain when pages are getting protected aggressively.
--- mm/vmscan.c | 84 ++++++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 71 insertions(+), 13 deletions(-)
mm/vmscan.c +71 -13
@@ -3120,9 +3120,46 @@ static int folio_update_gen(struct folio *folio, int gen)*/ struct gen_update_batch {int delta[MAX_NR_GENS ]; +struct folio *head, *tail; }; -static void lru_gen_update_batch (struct lruvec *lruvec,int type,int zone, +static void inline lru_gen_inc_bulk_finish (struct lru_gen_folio *lrugen, +int bulk_gen,bool type,int zone, +struct gen_update_batch *batch) +{ +if (!batch->head) +return ; + +list_bulk_move_tail (&lrugen->folios[bulk_gen][type][zone], + &batch->head->lru, + &batch->tail->lru); + + batch->head =NULL ; +} + +/* +* When aging, protected pages will go to the tail of the same higher +* gen, so the can be moved in batches. Besides reduced overhead, this +* also avoids changing their LRU order in a small scope. +*/ +static inline void lru_gen_try_inc_bulk (struct lru_gen_folio *lrugen,struct folio *folio, +int bulk_gen,int gen,bool type,int zone, +struct gen_update_batch *batch) +{ +/* +* If folio not moving to the bulk_gen, it's raced with promotion +* so it need to go to the head of another LRU. +*/ +if (bulk_gen != gen) +list_move (&folio->lru, &lrugen->folios[gen][type][zone]); + +if (!batch->head) + batch->tail = folio; + + batch->head = folio; +} + +static void lru_gen_update_batch (struct lruvec *lruvec,int bulk_gen,int type,int zone,struct gen_update_batch *batch) {int gen;
@@ -3130,6 +3167,8 @@ static void lru_gen_update_batch(struct lruvec *lruvec, int type, int zone,struct lru_gen_folio *lrugen = &lruvec->lrugen;enum lru_list lru = type ?LRU_INACTIVE_FILE :LRU_INACTIVE_ANON ; +lru_gen_inc_bulk_finish (lrugen, bulk_gen, type, zone, batch); +for (gen =0 ; gen <MAX_NR_GENS ; gen++) {int delta = batch->delta[gen];
@@ -3714,6 +3753,7 @@ static bool inc_min_seq(struct lruvec *lruvec, int type, bool can_swap)struct gen_update_batch batch = { };struct lru_gen_folio *lrugen = &lruvec->lrugen;int new_gen, old_gen =lru_gen_from_seq (lrugen->min_seq[type]); +int bulk_gen = (old_gen +1 ) %MAX_NR_GENS ;if (type ==LRU_GEN_ANON && !can_swap) goto done;
@@ -3721,24 +3761,33 @@ static bool inc_min_seq(struct lruvec *lruvec, int type, bool can_swap)/* prevent cold/hot inversion if force_scan is true */ for (zone =0 ; zone <MAX_NR_ZONES ; zone++) {struct list_head *head = &lrugen->folios[old_gen][type][zone]; +struct folio *prev =NULL ; -while (!list_empty (head)) { -struct folio *folio =lru_to_folio (head); +if (!list_empty (head)) + prev =lru_to_folio (head); +while (prev) { +struct folio *folio = prev;VM_WARN_ON_ONCE_FOLIO (folio_test_unevictable (folio), folio);VM_WARN_ON_ONCE_FOLIO (folio_test_active (folio), folio);VM_WARN_ON_ONCE_FOLIO (folio_is_file_lru (folio) != type, folio);VM_WARN_ON_ONCE_FOLIO (folio_zonenum (folio) != zone, folio); +if (unlikely (list_is_first (&folio->lru, head))) + prev =NULL ; +else + prev =lru_to_folio (&folio->lru); + new_gen =folio_inc_gen (lruvec, folio, false, &batch); -list_move_tail (&folio->lru, &lrugen->folios[new_gen][type][zone]); +lru_gen_try_inc_bulk (lrugen, folio, bulk_gen, new_gen, type, zone, &batch);if (!--remaining) { -lru_gen_update_batch (lruvec, type, zone, &batch); +lru_gen_update_batch (lruvec, bulk_gen, type, zone, &batch);return false; } } -lru_gen_update_batch (lruvec, type, zone, &batch); + +lru_gen_update_batch (lruvec, bulk_gen, type, zone, &batch); } done:reset_ctrl_pos (lruvec, type, true);
@@ -4258,7 +4307,7 @@ void lru_gen_soft_reclaim(struct mem_cgroup *memcg, int nid)******************************************************************************/ static bool sort_folio (struct lruvec *lruvec,struct folio *folio,struct scan_control *sc, -int tier_idx,struct gen_update_batch *batch) +int tier_idx,int bulk_gen,struct gen_update_batch *batch) {bool success;int gen =folio_lru_gen (folio);
@@ -4301,7 +4350,7 @@ static bool sort_folio(struct lruvec *lruvec, struct folio *folio, struct scan_cint hist =lru_hist_from_seq (lrugen->min_seq[type]); gen =folio_inc_gen (lruvec, folio, false, batch); -list_move_tail (&folio->lru, &lrugen->folios[gen][type][zone]); +lru_gen_try_inc_bulk (lrugen, folio, bulk_gen, gen, type, zone, batch);WRITE_ONCE (lrugen->protected[hist][type][tier -1 ], lrugen->protected[hist][type][tier -1 ] + delta);
@@ -4311,7 +4360,7 @@ static bool sort_folio(struct lruvec *lruvec, struct folio *folio, struct scan_c/* ineligible */ if (zone > sc->reclaim_idx ||skip_cma (folio, sc)) { gen =folio_inc_gen (lruvec, folio, false, batch); -list_move_tail (&folio->lru, &lrugen->folios[gen][type][zone]); +lru_gen_try_inc_bulk (lrugen, folio, bulk_gen, gen, type, zone, batch);return true; }
@@ -4385,11 +4434,16 @@ static int scan_folios(struct lruvec *lruvec, struct scan_control *sc,LIST_HEAD (moved);int skipped_zone =0 ;struct gen_update_batch batch = { }; +int bulk_gen = (gen +1 ) %MAX_NR_GENS ;int zone = (sc->reclaim_idx + i) %MAX_NR_ZONES ;struct list_head *head = &lrugen->folios[gen][type][zone]; +struct folio *prev =NULL ; -while (!list_empty (head)) { -struct folio *folio =lru_to_folio (head); +if (!list_empty (head)) + prev =lru_to_folio (head); + +while (prev) { +struct folio *folio = prev;int delta =folio_nr_pages (folio);VM_WARN_ON_ONCE_FOLIO (folio_test_unevictable (folio), folio);
@@ -4398,8 +4452,12 @@ static int scan_folios(struct lruvec *lruvec, struct scan_control *sc,VM_WARN_ON_ONCE_FOLIO (folio_zonenum (folio) != zone, folio); scanned += delta; +if (unlikely (list_is_first (&folio->lru, head))) + prev =NULL ; +else + prev =lru_to_folio (&folio->lru); -if (sort_folio (lruvec, folio, sc, tier, &batch)) +if (sort_folio (lruvec, folio, sc, tier, bulk_gen, &batch)) sorted += delta;else if (isolate_folio (lruvec, folio, sc)) {list_add (&folio->lru, list);
@@ -4419,7 +4477,7 @@ static int scan_folios(struct lruvec *lruvec, struct scan_control *sc, skipped += skipped_zone; } -lru_gen_update_batch (lruvec, type, zone, &batch); +lru_gen_update_batch (lruvec, bulk_gen, type, zone, &batch);if (!remaining || isolated >=MIN_LRU_BATCH )break ;
Signature · 1 line
2.43.0
PATCH v2 3/3 mm, lru_gen: try to prefetch next page when canning LRU
In reply to Kairui SongFrom: Kairui Song <[email protected]>
Prefetch for inactive/active LRU have been long exiting, apply the same optimization for MGLRU.
Ramdisk based swap test in a 4G memcg on a EPYC 7K62 with:
memcached -u nobody -m 16384 -s /tmp/memcached.socket \
-a 0766 -t 16 -B binary &
memtier_benchmark -S /tmp/memcached.socket \
-P memcache_binary -n allkeys \
--key-minimum=1 --key-maximum=16000000 -d 1024 \
--ratio=1:0 --key-pattern=P:P -c 2 -t 16 --pipeline 8 -x 6Average result of 18 test runs:
Before: 44017.78 Ops/sec After patch 1-3: 44890.50 Ops/sec (+1.8%)
Ramdisk fio test in a 4G memcg on a EPYC 7K62 with:
fio -name=mglru --numjobs=16 --directory=/mnt --size=960m \
--buffered=1 --ioengine=io_uring --iodepth=128 \
--iodepth_batch_submit=32 --iodepth_batch_complete=32 \
--rw=randread --random_distribution=zipf:0.5 --norandommap \
--time_based --ramp_time=1m --runtime=5m --group_reportingBefore this patch:
bw ( MiB/s): min= 7644, max= 9293, per=100.00%, avg=8777.77, stdev=16.59, samples=9568
iops : min=1956954, max=2379053, avg=2247108.51, stdev=4247.22, samples=9568
After this patch (+7.5%):
bw ( MiB/s): min= 8462, max= 9902, per=100.00%, avg=9444.77, stdev=16.43, samples=9568
iops : min=2166433, max=2535135, avg=2417858.23, stdev=4205.15, samples=9568
Prefetch is highly related to timing and architecture so it may only help in certain cases, some extra test showed at least no regression here for the series:
Ramdisk memtier test above in a 8G memcg on an Intel i7-9700:
memtier_benchmark -S /tmp/memcached.socket \
-P memcache_binary -n allkeys --key-minimum=1 \
--key-maximum=36000000 --key-pattern=P:P -c 1 -t 12 \
--ratio 1:0 --pipeline 8 -d 1024 -x 4Average result of 12 test runs:
Before: 61241.96 Ops/sec After patch 1-3: 61268.53 Ops/sec (+0.0%)
--- mm/vmscan.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)
mm/vmscan.c +8 -4
@@ -3773,10 +3773,12 @@ static bool inc_min_seq(struct lruvec *lruvec, int type, bool can_swap)VM_WARN_ON_ONCE_FOLIO (folio_is_file_lru (folio) != type, folio);VM_WARN_ON_ONCE_FOLIO (folio_zonenum (folio) != zone, folio); -if (unlikely (list_is_first (&folio->lru, head))) +if (unlikely (list_is_first (&folio->lru, head))) { prev =NULL ; -else + }else { prev =lru_to_folio (&folio->lru); +prefetchw (&prev->flags); + } new_gen =folio_inc_gen (lruvec, folio, false, &batch);lru_gen_try_inc_bulk (lrugen, folio, bulk_gen, new_gen, type, zone, &batch);
@@ -4452,10 +4454,12 @@ static int scan_folios(struct lruvec *lruvec, struct scan_control *sc,VM_WARN_ON_ONCE_FOLIO (folio_zonenum (folio) != zone, folio); scanned += delta; -if (unlikely (list_is_first (&folio->lru, head))) +if (unlikely (list_is_first (&folio->lru, head))) { prev =NULL ; -else + }else { prev =lru_to_folio (&folio->lru); +prefetchw (&prev->flags); + }if (sort_folio (lruvec, folio, sc, tier, bulk_gen, &batch)) sorted += delta;
Signature · 1 line
2.43.0
Re: [PATCH v2 3/3] mm, lru_gen: try to prefetch next page when canning LRU
Quoted 8 lines · Kairui Song <[email protected]> 于2024年1月12日周五 02:33写道:
From: Kairui Song <[email protected]>
Prefetch for inactive/active LRU have been long exiting, apply the same optimization for MGLRU.
Ramdisk based swap test in a 4G memcg on a EPYC 7K62 with:
Hi, my applogize, I just realize I forgot to fix the typo in title right after I send the patch... it should be:
mm, lru_gen: try to prefetch next page when scanning LRU