Skip to contentSkip to conversation

defconfig: xea: Change default spi-nor memory bus to 2 (single binary)

PATCH Applied Lukasz Majewski 2 participants 2 messages Jan 12, 2024 Arm i.MX and Layerscape

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 defconfig: xea: Change default spi-nor memory bus to 2 (single binary)

After the re-sync with Linux kernel (v6.0) of the XEA DTS (SHA1: 7d08ddd09b75e7a3c103cc0d0d3ed700287f268e) the alias for SPI bus, to which SPI-NOR memory is connected, has changed from 'spi3' to 'spi2'.

To be in sync with current u-boot's xea dts, the default bus number (which allows running 'sf probe' without any extra parameters given) has been adjusted.

---

 configs/imx28_xea_sb_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
configs/imx28_xea_sb_defconfig +1 -1
index 0b3259866e..9872d35c1b 100644
@@ -74,7 +74,7 @@ CONFIG_MMC_MXS=y
 CONFIG_MTD=y
 CONFIG_DM_MTD=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_BUS=3
+CONFIG_SF_DEFAULT_BUS=2
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_ISSI=y
 CONFIG_SPI_FLASH_SPANSION=y
Signature · 1 line
2.39.2
reviewer Applied
#1 lore raw
Quoted 11 lines · Lukasz Majewski

After the re-sync with Linux kernel (v6.0) of the XEA DTS (SHA1: 7d08ddd09b75e7a3c103cc0d0d3ed700287f268e) the alias for SPI bus, to which SPI-NOR memory is connected, has changed from 'spi3' to 'spi2'.

To be in sync with current u-boot's xea dts, the default bus number (which allows running 'sf probe' without any extra parameters given) has been adjusted.

Applied, thanks.