5.15.147-rc1 review
Subsystems (3)
Greg Kroah-Hartman
maintainercover 5.15.147-rc1 review
This is the start of the stable review cycle for the 5.15.147 release. There are 59 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Mon, 15 Jan 2024 09:41:55 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.147-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.15.147-rc1
Justin Chen <[email protected]>
net: usb: ax88179_178a: move priv to driver_priv
Justin Chen <[email protected]>
net: usb: ax88179_178a: remove redundant init code
Andrii Nakryiko <[email protected]>
tracing/kprobes: Fix symbol counting logic by looking at modules as well
Jiri Olsa <[email protected]>
kallsyms: Make module_kallsyms_on_each_symbol generally available
Phil Sutter <[email protected]>
netfilter: nf_tables: Reject tables of unsupported family
Adrian Hunter <[email protected]>
perf inject: Fix GEN_ELF_TEXT_OFFSET for jit
Jon Maxwell <[email protected]>
ipv6: remove max_size check inline with ipv4
John Fastabend <[email protected]>
net: tls, update curr on splice as well
Wenchao Chen <[email protected]>
mmc: sdhci-sprd: Fix eMMC init failure after hw reset
Geert Uytterhoeven <[email protected]>
mmc: core: Cancel delayed work before releasing host
Jorge Ramirez-Ortiz <[email protected]>
mmc: rpmb: fixes pause retune on all RPMB partitions.
Ziyang Huang <[email protected]>
mmc: meson-mx-sdhc: Fix initialization frozen issue
Jiajun Xie <[email protected]>
mm: fix unmap_mapping_range high bits shift bug
Benjamin Bara <[email protected]>
i2c: core: Fix atomic xfer check for non-preempt config
Jinghao Jia <[email protected]>
x86/kprobes: fix incorrect return address calculation in kprobe_emulate_call_indirect
Takashi Sakamoto <[email protected]>
firewire: ohci: suppress unexpected system reboot in AMD Ryzen machines and ASM108x/VT630x PCIe cards
Matthew Wilcox (Oracle) <[email protected]>
mm/memory-failure: check the mapcount of the precise page
Muhammad Usama Anjum <[email protected]>
selftests: secretmem: floor the memory size to the multiple of page_size
Thomas Lange <[email protected]>
net: Implement missing SO_TIMESTAMPING_NEW cmsg support
Michael Chan <[email protected]>
bnxt_en: Remove mis-applied code from bnxt_cfg_ntp_filters()
Chen Ni <[email protected]>
asix: Add check for usbnet_get_endpoints
Naveen Mamindlapalli <[email protected]>
octeontx2-af: Re-enable MAC TX in otx2_stop processing
Naveen Mamindlapalli <[email protected]>
octeontx2-af: Always configure NIX TX link credits based on max frame size
Sunil Goutham <[email protected]>
octeontx2-af: Set NIX link credits based on max LMAC
Hariprasad Kelam <[email protected]>
octeontx2-af: Don't enable Pause frames by default
Dinghao Liu <[email protected]>
net/qla3xxx: fix potential memleak in ql_alloc_buffer_queues
Rodrigo Cataldo <[email protected]>
igc: Fix hicredit calculation
Andrii Staikov <[email protected]>
i40e: Restore VF MSI-X state during PCI reset
Mark Brown <[email protected]>
ASoC: meson: g12a-tohdmitx: Fix event generation for S/PDIF mux
Mark Brown <[email protected]>
ASoC: meson: g12a-toacodec: Fix event generation
Mark Brown <[email protected]>
ASoC: meson: g12a-tohdmitx: Validate written enum values
Mark Brown <[email protected]>
ASoC: meson: g12a-toacodec: Validate written enum values
Ke Xiao <[email protected]>
i40e: fix use-after-free in i40e_aqc_add_filters()
Marc Dionne <[email protected]>
net: Save and restore msg_namelen in sock_sendmsg
Pablo Neira Ayuso <[email protected]>
netfilter: nft_immediate: drop chain reference counter on error
Adrian Cinal <[email protected]>
net: bcmgenet: Fix FCS generation for fragmented skbuffs
Zhipeng Lu <[email protected]>
sfc: fix a double-free bug in efx_probe_filters
Stefan Wahren <[email protected]>
ARM: sun9i: smp: Fix array-index-out-of-bounds read in sunxi_mc_smp_init
Vadim Fedorenko <[email protected]>
net-timestamp: extend SOF_TIMESTAMPING_OPT_ID to HW timestamps
Marc Kleine-Budde <[email protected]>
can: raw: add support for SO_MARK
Marc Kleine-Budde <[email protected]>
can: raw: add support for SO_TXTIME/SCM_TXTIME
Jörn-Thorben Hinz <[email protected]>
net: Implement missing getsockopt(SO_TIMESTAMPING_NEW)
Kai-Heng Feng <[email protected]>
r8169: Fix PCI error on system resume
Hangyu Hua <[email protected]>
net: sched: em_text: fix possible memory leak in em_text_destroy()
David Thompson <[email protected]>
mlxbf_gige: fix receive packet race condition
Chancel Liu <[email protected]>
ASoC: fsl_rpmsg: Fix error handler with pm_runtime_enable
Kurt Kanzenbach <[email protected]>
igc: Check VLAN EtherType mask
Kurt Kanzenbach <[email protected]>
igc: Check VLAN TCI mask
Kurt Kanzenbach <[email protected]>
igc: Report VLAN EtherType matching back to user
Sudheer Mogilappagari <[email protected]>
i40e: Fix filter input checks to prevent config with invalid values
Khaled Almahallawy <[email protected]>
drm/i915/dp: Fix passing the correct DPCD_REV for drm_dp_set_phy_test_pattern
Suman Ghosh <[email protected]>
octeontx2-af: Fix marking couple of structure as __packed
Siddh Raman Pant <[email protected]>
nfc: llcp_core: Hold a ref to llcp_local->dev when holding a ref to llcp_local
Douglas Anderson <[email protected]>
drm/bridge: ti-sn65dsi86: Never store more than msg->size bytes in AUX xfer
Johannes Berg <[email protected]>
wifi: iwlwifi: pcie: don't synchronize IRQs from IRQ
Bjorn Helgaas <[email protected]>
Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"
Siddhesh Dharme <[email protected]>
ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP ProBook 440 G6
Sarthak Kukreti <[email protected]>
block: Don't invalidate pagecache for invalid falloc modes
Edward Adam Davis <[email protected]>
keys, dns: Fix missing size check of V1 server-list header
-------------
Diffstat:
Makefile | 4 +- arch/arm/mach-sunxi/mc_smp.c | 4 +- arch/x86/kernel/kprobes/core.c | 3 +- block/fops.c | 21 ++- drivers/firewire/ohci.c | 51 +++++++ drivers/gpu/drm/bridge/ti-sn65dsi86.c | 4 +- drivers/gpu/drm/i915/display/intel_dp.c | 2 +- drivers/i2c/i2c-core.h | 4 +- drivers/mmc/core/block.c | 7 +- drivers/mmc/core/host.c | 1 + drivers/mmc/host/meson-mx-sdhc-mmc.c | 26 +--- drivers/mmc/host/sdhci-sprd.c | 10 +- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 4 +- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 4 +- drivers/net/ethernet/intel/i40e/i40e_main.c | 11 +- drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 34 ++++- drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h | 3 + drivers/net/ethernet/intel/igc/igc.h | 1 + drivers/net/ethernet/intel/igc/igc_ethtool.c | 42 +++++- drivers/net/ethernet/intel/igc/igc_tsn.c | 2 +- drivers/net/ethernet/marvell/octeontx2/af/cgx.c | 68 ++++++---- .../ethernet/marvell/octeontx2/af/lmac_common.h | 1 + drivers/net/ethernet/marvell/octeontx2/af/npc.h | 4 +- drivers/net/ethernet/marvell/octeontx2/af/rpm.c | 77 ++++++----- drivers/net/ethernet/marvell/octeontx2/af/rpm.h | 1 + drivers/net/ethernet/marvell/octeontx2/af/rvu.h | 3 +- .../net/ethernet/marvell/octeontx2/af/rvu_cgx.c | 33 +++++ .../net/ethernet/marvell/octeontx2/af/rvu_nix.c | 146 ++++----------------- .../ethernet/marvell/octeontx2/nic/otx2_common.c | 1 + .../net/ethernet/marvell/octeontx2/nic/otx2_pf.c | 15 ++- .../net/ethernet/marvell/octeontx2/nic/otx2_vf.c | 12 +- .../ethernet/mellanox/mlxbf_gige/mlxbf_gige_rx.c | 9 +- drivers/net/ethernet/qlogic/qla3xxx.c | 2 + drivers/net/ethernet/realtek/r8169_main.c | 2 +- drivers/net/ethernet/sfc/rx_common.c | 4 +- drivers/net/usb/ax88172a.c | 4 +- drivers/net/usb/ax88179_178a.c | 115 ++++------------ drivers/net/wireless/intel/iwlwifi/pcie/internal.h | 4 +- drivers/net/wireless/intel/iwlwifi/pcie/rx.c | 8 +- drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 17 +-- drivers/pci/pci.c | 6 + drivers/pci/pci.h | 2 + drivers/pci/pcie/aspm.c | 19 +++ include/linux/module.h | 9 ++ include/net/dst_ops.h | 2 +- kernel/module.c | 2 - kernel/trace/trace_kprobe.c | 2 + mm/memory-failure.c | 6 +- mm/memory.c | 4 +- net/can/raw.c | 12 +- net/core/dst.c | 8 +- net/core/sock.c | 12 +- net/dns_resolver/dns_key.c | 19 ++- net/ipv4/ip_output.c | 2 +- net/ipv6/ip6_output.c | 2 +- net/ipv6/route.c | 13 +- net/netfilter/nf_tables_api.c | 27 ++++ net/netfilter/nft_immediate.c | 2 +- net/nfc/llcp_core.c | 39 +++++- net/sched/em_text.c | 4 +- net/socket.c | 2 + net/tls/tls_sw.c | 2 + sound/pci/hda/patch_realtek.c | 1 + sound/soc/fsl/fsl_rpmsg.c | 10 +- sound/soc/meson/g12a-toacodec.c | 5 +- sound/soc/meson/g12a-tohdmitx.c | 8 +- tools/perf/util/genelf.h | 4 +- tools/testing/selftests/vm/memfd_secret.c | 3 + 68 files changed, 588 insertions(+), 403 deletions(-)
Greg Kroah-Hartman
maintainerPATCH 1/59 keys, dns: Fix missing size check of V1 server-list header
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Edward Adam Davis <[email protected]>
commit 1997b3cb4217b09e49659b634c94da47f0340409 upstream.
The dns_resolver_preparse() function has a check on the size of the payload for the basic header of the binary-style payload, but is missing a check for the size of the V1 server-list payload header after determining that's what we've been given.
Fix this by getting rid of the the pointer to the basic header and just assuming that we have a V1 server-list payload and moving the V1 server list pointer inside the if-statement. Dealing with other types and versions can be left for when such have been defined.
This can be tested by doing the following with KASAN enabled:
echo -n -e '\x0\x0\x1\x2' | keyctl padd dns_resolver foo @p
and produces an oops like the following:
BUG: KASAN: slab-out-of-bounds in dns_resolver_preparse+0xc9f/0xd60 net/dns_resolver/dns_key.c:127
Read of size 1 at addr ffff888028894084 by task syz-executor265/5069
...
Call Trace:
dns_resolver_preparse+0xc9f/0xd60 net/dns_resolver/dns_key.c:127
__key_create_or_update+0x453/0xdf0 security/keys/key.c:842
key_create_or_update+0x42/0x50 security/keys/key.c:1007
__do_sys_add_key+0x29c/0x450 security/keys/keyctl.c:134
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x62/0x6aThis patch was originally by Edward Adam Davis, but was modified by Linus.
--- net/dns_resolver/dns_key.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-)
net/dns_resolver/dns_key.c +9 -10
@@ -91,8 +91,6 @@ const struct cred *dns_resolver_cache;static int dns_resolver_preparse (struct key_preparsed_payload *prep) { -const struct dns_server_list_v1_header *v1; -const struct dns_payload_header *bin;struct user_key_payload *upayload;unsigned long derrno;int ret;
@@ -103,27 +101,28 @@ dns_resolver_preparse(struct key_preparsreturn -EINVAL ;if (data[0 ] ==0 ) { +const struct dns_server_list_v1_header *v1; +/* It may be a server list. */ -if (datalen <=sizeof (*bin)) +if (datalen <=sizeof (*v1))return -EINVAL ; - bin = (const struct dns_payload_header *)data; -kenter ("[%u,%u],%u" , bin->content, bin->version, datalen); -if (bin->content !=DNS_PAYLOAD_IS_SERVER_LIST ) { + v1 = (const struct dns_server_list_v1_header *)data; +kenter ("[%u,%u],%u" , v1->hdr.content, v1->hdr.version, datalen); +if (v1->hdr.content !=DNS_PAYLOAD_IS_SERVER_LIST ) {pr_warn_ratelimited ("dns_resolver: Unsupported content type (%u)\n" , - bin->content); + v1->hdr.content);return -EINVAL ; } -if (bin->version !=1 ) { +if (v1->hdr.version !=1 ) {pr_warn_ratelimited ("dns_resolver: Unsupported server list version (%u)\n" , - bin->version); + v1->hdr.version);return -EINVAL ; } - v1 = (const struct dns_server_list_v1_header *)bin;if ((v1->status !=DNS_LOOKUP_GOOD && v1->status !=DNS_LOOKUP_GOOD_WITH_BAD )) {if (prep->expiry ==TIME64_MAX )
Greg Kroah-Hartman
maintainerPATCH 2/59 block: Dont invalidate pagecache for invalid falloc modes
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sarthak Kukreti <[email protected]>
commit 1364a3c391aedfeb32aa025303ead3d7c91cdf9d upstream.
Only call truncate_bdev_range() if the fallocate mode is supported. This fixes a bug where data in the pagecache could be invalidated if the fallocate() was called on the block device with an invalid mode.
--- block/fops.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-)
block/fops.c +16 -5
@@ -599,22 +599,33 @@ static long blkdev_fallocate(struct filefilemap_invalidate_lock (inode->i_mapping); -/* Invalidate the page cache, including dirty pages. */ - error =truncate_bdev_range (bdev, file->f_mode, start, end); -if (error) - goto fail; - +/* +* Invalidate the page cache, including dirty pages, for valid +* de-allocate mode calls to fallocate(). +*/ switch (mode) {case FALLOC_FL_ZERO_RANGE :case FALLOC_FL_ZERO_RANGE |FALLOC_FL_KEEP_SIZE : + error =truncate_bdev_range (bdev, file->f_mode, start, end); +if (error) + goto fail; + error =blkdev_issue_zeroout (bdev, start >>9 , len >>9 ,GFP_KERNEL ,BLKDEV_ZERO_NOUNMAP );break ;case FALLOC_FL_PUNCH_HOLE |FALLOC_FL_KEEP_SIZE : + error =truncate_bdev_range (bdev, file->f_mode, start, end); +if (error) + goto fail; + error =blkdev_issue_zeroout (bdev, start >>9 , len >>9 ,GFP_KERNEL ,BLKDEV_ZERO_NOFALLBACK );break ;case FALLOC_FL_PUNCH_HOLE |FALLOC_FL_KEEP_SIZE |FALLOC_FL_NO_HIDE_STALE : + error =truncate_bdev_range (bdev, file->f_mode, start, end); +if (error) + goto fail; + error =blkdev_issue_discard (bdev, start >>9 , len >>9 ,GFP_KERNEL ,0 );break ;
Greg Kroah-Hartman
maintainerPATCH 3/59 ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP ProBook 440 G6
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Siddhesh Dharme <[email protected]>
commit b6ce6e6c79e4ec650887f1fe391a70e54972001a upstream.
LEDs in 'HP ProBook 440 G6' laptop are controlled by ALC236 codec. Enable already existing quirk 'ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF' to fix mute and mic-mute LEDs.
--- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+)
sound/pci/hda/patch_realtek.c +1 -0
@@ -9054,6 +9054,7 @@ static const struct snd_pci_quirk alc269SND_PCI_QUIRK (0x103c ,0x84da ,"HP OMEN dc0019-ur" ,ALC295_FIXUP_HP_OMEN ),SND_PCI_QUIRK (0x103c ,0x84e7 ,"HP Pavilion 15" ,ALC269_FIXUP_HP_MUTE_LED_MIC3 ),SND_PCI_QUIRK (0x103c ,0x8519 ,"HP Spectre x360 15-df0xxx" ,ALC285_FIXUP_HP_SPECTRE_X360 ), +SND_PCI_QUIRK (0x103c ,0x8537 ,"HP ProBook 440 G6" ,ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF ),SND_PCI_QUIRK (0x103c ,0x860f ,"HP ZBook 15 G6" ,ALC285_FIXUP_HP_GPIO_AMP_INIT ),SND_PCI_QUIRK (0x103c ,0x861f ,"HP Elite Dragonfly G1" ,ALC285_FIXUP_HP_GPIO_AMP_INIT ), SND_PCI_QUIRK(0x103c, 0x869d, "HP", ALC236_FIXUP_HP_MUTE_LED),
Greg Kroah-Hartman
maintainerPATCH 4/59 Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bjorn Helgaas <[email protected]>
commit f93e71aea6c60ebff8adbd8941e678302d377869 upstream.
This reverts commit 08d0cc5f34265d1a1e3031f319f594bd1970976c.
Michael reported that when attempting to resume from suspend to RAM on ASUS mini PC PN51-BB757MDE1 (DMI model: MINIPC PN51-E1), 08d0cc5f3426 ("PCI/ASPM: Remove pcie_aspm_pm_state_change()") caused a 12-second delay with no output, followed by a reboot.
Workarounds include:
- Reverting 08d0cc5f3426 ("PCI/ASPM: Remove pcie_aspm_pm_state_change()")
- Booting with "pcie_aspm=off"
- Booting with "pcie_aspm.policy=performance"
- "echo 0 | sudo tee /sys/bus/pci/devices/0000:03:00.0/link/l1_aspm" before suspending
- Connecting a USB flash drive
--- drivers/pci/pci.c | 6 ++++++ drivers/pci/pci.h | 2 ++ drivers/pci/pcie/aspm.c | 19 +++++++++++++++++++ 3 files changed, 27 insertions(+)
drivers/pci/pci.c +6 -0
@@ -820,6 +820,9 @@ int pci_wait_for_pending(struct pci_devreturn 1 ; } +if (dev->bus->self) +pcie_aspm_pm_state_change (dev->bus->self); +return 0 ; }
@@ -1140,6 +1143,9 @@ static int pci_raw_set_power_state(strucif (need_restore)pci_restore_bars (dev); +if (dev->bus->self) +pcie_aspm_pm_state_change (dev->bus->self); +return 0 ; }
drivers/pci/pci.h +2 -0
@@ -595,10 +595,12 @@ bool pcie_wait_for_link(struct pci_dev *#ifdef CONFIG_PCIEASPM void pcie_aspm_init_link_state (struct pci_dev *pdev);void pcie_aspm_exit_link_state (struct pci_dev *pdev); +void pcie_aspm_pm_state_change (struct pci_dev *pdev);void pcie_aspm_powersave_config_link (struct pci_dev *pdev);#else static inline void pcie_aspm_init_link_state (struct pci_dev *pdev) { }static inline void pcie_aspm_exit_link_state (struct pci_dev *pdev) { } +static inline void pcie_aspm_pm_state_change (struct pci_dev *pdev) { }static inline void pcie_aspm_powersave_config_link (struct pci_dev *pdev) { }#endif
drivers/pci/pcie/aspm.c +19 -0
@@ -1038,6 +1038,25 @@ void pcie_aspm_exit_link_state(struct pcup_read (&pci_bus_sem); } +/* @pdev: the root port or switch downstream port */ +void pcie_aspm_pm_state_change (struct pci_dev *pdev) +{ +struct pcie_link_state *link = pdev->link_state; + +if (aspm_disabled || !link) +return ; +/* +* Devices changed PM state, we should recheck if latency +* meets all functions' requirement +*/ +down_read (&pci_bus_sem); +mutex_lock (&aspm_lock); +pcie_update_aspm_capable (link->root); +pcie_config_aspm_path (link); +mutex_unlock (&aspm_lock); +up_read (&pci_bus_sem); +} +void pcie_aspm_powersave_config_link (struct pci_dev *pdev) {struct pcie_link_state *link = pdev->link_state;
Greg Kroah-Hartman
maintainerPATCH 5/59 wifi: iwlwifi: pcie: dont synchronize IRQs from IRQ
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Berg <[email protected]>
[ Upstream commit 400f6ebbc175286576c7f7fddf3c347d09d12310 ]
On older devices (before unified image!) we can end up calling stop_device from an rfkill interrupt. However, in stop_device we attempt to synchronize IRQs, which then of course deadlocks.
Avoid this by checking the context, if running from the IRQ thread then don't synchronize. This wouldn't be correct on a new device since RSS is supported, but older devices only have a single interrupt/queue.
--- .../net/wireless/intel/iwlwifi/pcie/internal.h | 4 ++-- drivers/net/wireless/intel/iwlwifi/pcie/rx.c | 8 ++++---- drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 17 +++++++++-------- 3 files changed, 15 insertions(+), 14 deletions(-)
drivers/net/wireless/intel/iwlwifi/pcie/internal.h +2 -2
@@ -728,7 +728,7 @@ static inline void iwl_enable_rfkill_int(struct iwl_trans *trans) } } -void iwl_pcie_handle_rfkill_irq (struct iwl_trans *trans); +void iwl_pcie_handle_rfkill_irq (struct iwl_trans *trans,bool from_irq);static inline bool iwl_is_rfkill_set (struct iwl_trans *trans) {
@@ -775,7 +775,7 @@ static inline bool iwl_pcie_dbg_on(struct iwl_trans *trans)return (trans->dbg.dest_tlv ||iwl_trans_dbg_ini_valid (trans)); } -void iwl_trans_pcie_rf_kill (struct iwl_trans *trans,bool state); +void iwl_trans_pcie_rf_kill (struct iwl_trans *trans,bool state,bool from_irq);void iwl_trans_pcie_dump_regs (struct iwl_trans *trans);#ifdef CONFIG_IWLWIFI_DEBUGFS
drivers/net/wireless/intel/iwlwifi/pcie/rx.c +4 -4
@@ -1780,7 +1780,7 @@ static u32 iwl_pcie_int_cause_ict(struct iwl_trans *trans)return inta; } -void iwl_pcie_handle_rfkill_irq (struct iwl_trans *trans) +void iwl_pcie_handle_rfkill_irq (struct iwl_trans *trans,bool from_irq) {struct iwl_trans_pcie *trans_pcie =IWL_TRANS_GET_PCIE_TRANS (trans);struct isr_statistics *isr_stats = &trans_pcie->isr_stats;
@@ -1804,7 +1804,7 @@ void iwl_pcie_handle_rfkill_irq(struct iwl_trans *trans) isr_stats->rfkill++;if (prev != report) -iwl_trans_pcie_rf_kill (trans, report); +iwl_trans_pcie_rf_kill (trans, report, from_irq);mutex_unlock (&trans_pcie->mutex);if (hw_rfkill) {
@@ -1944,7 +1944,7 @@ irqreturn_t iwl_pcie_irq_handler(int irq, void *dev_id)/* HW RF KILL switch toggled */ if (inta &CSR_INT_BIT_RF_KILL ) { -iwl_pcie_handle_rfkill_irq (trans); +iwl_pcie_handle_rfkill_irq (trans, true); handled |=CSR_INT_BIT_RF_KILL ; }
@@ -2332,7 +2332,7 @@ irqreturn_t iwl_pcie_irq_msix_handler(int irq, void *dev_id)/* HW RF KILL switch toggled */ if (inta_hw &MSIX_HW_INT_CAUSES_REG_RF_KILL ) -iwl_pcie_handle_rfkill_irq (trans); +iwl_pcie_handle_rfkill_irq (trans, true);if (inta_hw &MSIX_HW_INT_CAUSES_REG_HW_ERR ) { IWL_ERR(trans,
drivers/net/wireless/intel/iwlwifi/pcie/trans.c +9 -8
@@ -1046,7 +1046,7 @@ bool iwl_pcie_check_hw_rf_kill(struct iwl_trans *trans) report =test_bit (STATUS_RFKILL_OPMODE , &trans->status);if (prev != report) -iwl_trans_pcie_rf_kill (trans, report); +iwl_trans_pcie_rf_kill (trans, report, false);return hw_rfkill; }
@@ -1170,7 +1170,7 @@ static void iwl_pcie_init_msix(struct iwl_trans_pcie *trans_pcie) trans_pcie->hw_mask = trans_pcie->hw_init_mask; } -static void _iwl_trans_pcie_stop_device (struct iwl_trans *trans) +static void _iwl_trans_pcie_stop_device (struct iwl_trans *trans,bool from_irq) {struct iwl_trans_pcie *trans_pcie =IWL_TRANS_GET_PCIE_TRANS (trans);
@@ -1197,7 +1197,8 @@ static void _iwl_trans_pcie_stop_device(struct iwl_trans *trans)if (test_and_clear_bit (STATUS_DEVICE_ENABLED , &trans->status)) {IWL_DEBUG_INFO (trans,"DEVICE_ENABLED bit was set and is now cleared\n" ); -iwl_pcie_synchronize_irqs (trans); +if (!from_irq) +iwl_pcie_synchronize_irqs (trans);iwl_pcie_rx_napi_sync (trans);iwl_pcie_tx_stop (trans);iwl_pcie_rx_stop (trans);
@@ -1385,7 +1386,7 @@ void iwl_trans_pcie_handle_stop_rfkill(struct iwl_trans *trans,clear_bit (STATUS_RFKILL_OPMODE , &trans->status); }if (hw_rfkill != was_in_rfkill) -iwl_trans_pcie_rf_kill (trans, hw_rfkill); +iwl_trans_pcie_rf_kill (trans, hw_rfkill, false); }static void iwl_trans_pcie_stop_device (struct iwl_trans *trans)
@@ -1400,12 +1401,12 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans)mutex_lock (&trans_pcie->mutex); trans_pcie->opmode_down = true; was_in_rfkill =test_bit (STATUS_RFKILL_OPMODE , &trans->status); -_iwl_trans_pcie_stop_device (trans); +_iwl_trans_pcie_stop_device (trans, false);iwl_trans_pcie_handle_stop_rfkill (trans, was_in_rfkill);mutex_unlock (&trans_pcie->mutex); } -void iwl_trans_pcie_rf_kill (struct iwl_trans *trans,bool state) +void iwl_trans_pcie_rf_kill (struct iwl_trans *trans,bool state,bool from_irq) {struct iwl_trans_pcie __maybe_unused *trans_pcie =IWL_TRANS_GET_PCIE_TRANS (trans);
@@ -1418,7 +1419,7 @@ void iwl_trans_pcie_rf_kill(struct iwl_trans *trans, bool state)if (trans->trans_cfg->gen2)_iwl_trans_pcie_gen2_stop_device (trans);else -_iwl_trans_pcie_stop_device (trans); +_iwl_trans_pcie_stop_device (trans, from_irq); } }
@@ -2741,7 +2742,7 @@ static ssize_t iwl_dbgfs_rfkill_write(struct file *file,IWL_WARN (trans,"changing debug rfkill %d->%d\n" , trans_pcie->debug_rfkill, new_value); trans_pcie->debug_rfkill = new_value; -iwl_pcie_handle_rfkill_irq (trans); +iwl_pcie_handle_rfkill_irq (trans, false);return count; }
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 6/59 drm/bridge: ti-sn65dsi86: Never store more than msg->size bytes in AUX xfer
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Douglas Anderson <[email protected]>
[ Upstream commit aca58eac52b88138ab98c814afb389a381725cd7 ]
For aux reads, the value msg->size indicates the size of the buffer provided by msg->buffer. We should never in any circumstances write more bytes to the buffer since it may overflow the buffer.
In the ti-sn65dsi86 driver there is one code path that reads the transfer length from hardware. Even though it's never been seen to be a problem, we should make extra sure that the hardware isn't increasing the length since doing so would cause us to overrun the buffer.
--- drivers/gpu/drm/bridge/ti-sn65dsi86.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/gpu/drm/bridge/ti-sn65dsi86.c +3 -1
@@ -471,6 +471,7 @@ static ssize_t ti_sn_aux_transfer(struct drm_dp_aux *aux,u32 request_val =AUX_CMD_REQ (msg->request);u8 *buf = msg->buffer;unsigned int len = msg->size; +unsigned int short_len;unsigned int val;int ret;u8 addr_len[SN_AUX_LENGTH_REG +1 -SN_AUX_ADDR_19_16_REG ];
@@ -544,7 +545,8 @@ static ssize_t ti_sn_aux_transfer(struct drm_dp_aux *aux, }if (val &AUX_IRQ_STATUS_AUX_SHORT ) { - ret =regmap_read (pdata->regmap,SN_AUX_LENGTH_REG , &len); + ret =regmap_read (pdata->regmap,SN_AUX_LENGTH_REG , &short_len); + len =min (len, short_len);if (ret) goto exit; }else if (val &AUX_IRQ_STATUS_NAT_I2C_FAIL ) {
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 7/59 nfc: llcp_core: Hold a ref to llcp_local->dev when holding a ref to llcp_local
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Siddh Raman Pant <[email protected]>
[ Upstream commit c95f919567d6f1914f13350af61a1b044ac85014 ]
llcp_sock_sendmsg() calls nfc_llcp_send_ui_frame() which in turn calls nfc_alloc_send_skb(), which accesses the nfc_dev from the llcp_sock for getting the headroom and tailroom needed for skb allocation.
Parallelly the nfc_dev can be freed, as the refcount is decreased via nfc_free_device(), leading to a UAF reported by Syzkaller, which can be summarized as follows:
(1) llcp_sock_sendmsg() -> nfc_llcp_send_ui_frame()
-> nfc_alloc_send_skb() -> Dereference *nfc_dev (2) virtual_ncidev_close() -> nci_free_device() -> nfc_free_device() -> put_device() -> nfc_release() -> Free *nfc_dev
When a reference to llcp_local is acquired, we do not acquire the same for the nfc_dev. This leads to freeing even when the llcp_local is in use, and this is the case with the UAF described above too.
Thus, when we acquire a reference to llcp_local, we should acquire a reference to nfc_dev, and release the references appropriately later.
References for llcp_local is initialized in nfc_llcp_register_device() (which is called by nfc_register_device()). Thus, we should acquire a reference to nfc_dev there.
nfc_unregister_device() calls nfc_llcp_unregister_device() which in turn calls nfc_llcp_local_put(). Thus, the reference to nfc_dev is appropriately released later.
--- net/nfc/llcp_core.c | 39 ++++++++++++++++++++++++++++++++++++--- 1 file changed, 36 insertions(+), 3 deletions(-)
net/nfc/llcp_core.c +36 -3
@@ -147,6 +147,13 @@ static void nfc_llcp_socket_release(struct nfc_llcp_local *local, bool device,static struct nfc_llcp_local *nfc_llcp_local_get (struct nfc_llcp_local *local) { +/* Since using nfc_llcp_local may result in usage of nfc_dev, whenever +* we hold a reference to local, we also need to hold a reference to +* the device to avoid UAF. +*/ +if (!nfc_get_device (local->dev->idx)) +return NULL ; +kref_get (&local->ref);return local;
@@ -179,10 +186,18 @@ static void local_release(struct kref *ref)int nfc_llcp_local_put (struct nfc_llcp_local *local) { +struct nfc_dev *dev; +int ret; +if (local ==NULL )return 0 ; -return kref_put (&local->ref, local_release); + dev = local->dev; + + ret =kref_put (&local->ref, local_release); +nfc_put_device (dev); + +return ret; } static struct nfc_llcp_sock *nfc_llcp_sock_get(struct nfc_llcp_local *local,
@@ -968,8 +983,17 @@ static void nfc_llcp_recv_connect(struct nfc_llcp_local *local, } new_sock =nfc_llcp_sock (new_sk); - new_sock->dev = local->dev; + new_sock->local =nfc_llcp_local_get (local); +if (!new_sock->local) { + reason =LLCP_DM_REJ ; +sock_put (&new_sock->sk); +release_sock (&sock->sk); +sock_put (&sock->sk); + goto fail; + } + + new_sock->dev = local->dev; new_sock->rw = sock->rw; new_sock->miux = sock->miux; new_sock->nfc_protocol = sock->nfc_protocol;
@@ -1607,7 +1631,16 @@ int nfc_llcp_register_device(struct nfc_dev *ndev)if (local ==NULL )return -ENOMEM ; - local->dev = ndev; +/* As we are going to initialize local's refcount, we need to get the +* nfc_dev to avoid UAF, otherwise there is no point in continuing. +* See nfc_llcp_local_get(). +*/ + local->dev =nfc_get_device (ndev->idx); +if (!local->dev) { +kfree (local); +return -ENODEV ; + } +INIT_LIST_HEAD (&local->list);kref_init (&local->ref);mutex_init (&local->sdp_lock);
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 8/59 octeontx2-af: Fix marking couple of structure as __packed
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Suman Ghosh <[email protected]>
[ Upstream commit 0ee2384a5a0f3b4eeac8d10bb01a0609d245a4d1 ]
Couple of structures was not marked as __packed. This patch fixes the same and mark them as __packed.
--- drivers/net/ethernet/marvell/octeontx2/af/npc.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/marvell/octeontx2/af/npc.h +2 -2
@@ -490,7 +490,7 @@ struct npc_lt_def {u8 ltype_mask;u8 ltype_match;u8 lid; -}; +} __packed;struct npc_lt_def_ipsec {u8 ltype_mask;
@@ -498,7 +498,7 @@ struct npc_lt_def_ipsec {u8 lid;u8 spi_offset;u8 spi_nz; -}; +} __packed;struct npc_lt_def_apad {u8 ltype_mask;
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 9/59 drm/i915/dp: Fix passing the correct DPCD_REV for drm_dp_set_phy_test_pattern
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Khaled Almahallawy <[email protected]>
[ Upstream commit 2bd7a06a1208aaacb4e7a2a5436c23bce8d70801 ]
Using link_status to get DPCD_REV fails when disabling/defaulting phy pattern. Use intel_dp->dpcd to access DPCD_REV correctly.
--- drivers/gpu/drm/i915/display/intel_dp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/display/intel_dp.c +1 -1
@@ -3275,7 +3275,7 @@ static void intel_dp_process_phy_request(struct intel_dp *intel_dp, intel_dp->train_set, crtc_state->lane_count);drm_dp_set_phy_test_pattern (&intel_dp->aux, data, - link_status[DP_DPCD_REV ]); + intel_dp->dpcd[DP_DPCD_REV ]); }static u8 intel_dp_autotest_phy_pattern (struct intel_dp *intel_dp)
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 10/59 i40e: Fix filter input checks to prevent config with invalid values
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sudheer Mogilappagari <[email protected]>
[ Upstream commit 3e48041d9820c17e0a51599d12e66c6e12a8d08d ]
Prevent VF from configuring filters with unsupported actions or use REDIRECT action with invalid tc number. Current checks could cause out of bounds access on PF side.
--- drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c +4 -4
@@ -3427,16 +3427,16 @@ static int i40e_validate_cloud_filter(struct i40e_vf *vf,bool found = false;int bkt; -if (!tc_filter->action) { +if (tc_filter->action !=VIRTCHNL_ACTION_TC_REDIRECT ) {dev_info (&pf->pdev->dev, -"VF %d: Currently ADq doesn't support Drop Action\n" , - vf->vf_id); +"VF %d: ADQ doesn't support this action (%d)\n" , + vf->vf_id, tc_filter->action); goto err; }/* action_meta is TC number here to which the filter is applied */ if (!tc_filter->action_meta || - tc_filter->action_meta >I40E_MAX_VF_VSI ) { + tc_filter->action_meta > vf->num_tc) {dev_info (&pf->pdev->dev,"VF %d: Invalid TC number %u\n" , vf->vf_id, tc_filter->action_meta); goto err;
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 11/59 igc: Report VLAN EtherType matching back to user
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kurt Kanzenbach <[email protected]>
[ Upstream commit 088464abd48cf3735aee91f9e211b32da9d81117 ]
Currently the driver allows to configure matching by VLAN EtherType. However, the retrieval function does not report it back to the user. Add it.
Before:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 action 0 |Added rule with ID 63 |root@host:~# ethtool --show-ntuple enp3s0 |4 RX rings available |Total 1 rules | |Filter: 63 | Flow Type: Raw Ethernet | Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Ethertype: 0x0 mask: 0xFFFF | Action: Direct to queue 0
After:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 action 0 |Added rule with ID 63 |root@host:~# ethtool --show-ntuple enp3s0 |4 RX rings available |Total 1 rules | |Filter: 63 | Flow Type: Raw Ethernet | Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Ethertype: 0x0 mask: 0xFFFF | VLAN EtherType: 0x8100 mask: 0x0 | VLAN: 0x0 mask: 0xffff | User-defined: 0x0 mask: 0xffffffffffffffff | Action: Direct to queue 0
--- drivers/net/ethernet/intel/igc/igc_ethtool.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/net/ethernet/intel/igc/igc_ethtool.c +6 -0
@@ -972,6 +972,12 @@ static int igc_ethtool_get_nfc_rule(struct igc_adapter *adapter, fsp->m_u.ether_spec.h_proto =ETHER_TYPE_FULL_MASK ; } +if (rule->filter.match_flags &IGC_FILTER_FLAG_VLAN_ETYPE ) { + fsp->flow_type |=FLOW_EXT ; + fsp->h_ext.vlan_etype = rule->filter.vlan_etype; + fsp->m_ext.vlan_etype =ETHER_TYPE_FULL_MASK ; + } +if (rule->filter.match_flags &IGC_FILTER_FLAG_VLAN_TCI ) { fsp->flow_type |=FLOW_EXT ; fsp->h_ext.vlan_tci =htons (rule->filter.vlan_tci);
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 12/59 igc: Check VLAN TCI mask
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kurt Kanzenbach <[email protected]>
[ Upstream commit b5063cbe148b829e8eb97672c2cbccc058835476 ]
Currently the driver accepts VLAN TCI steering rules regardless of the configured mask. And things might fail silently or with confusing error messages to the user.
There are two ways to handle the VLAN TCI mask:
1. Match on the PCP field using a VLAN prio filter
2. Match on complete TCI field using a flex filter
Therefore, add checks and code for that.
For instance the following rule is invalid and will be converted into a VLAN prio rule which is not correct:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan 0x0001 m 0xf000 \ | action 1 |Added rule with ID 61 |root@host:~# ethtool --show-ntuple enp3s0 |4 RX rings available |Total 1 rules | |Filter: 61 | Flow Type: Raw Ethernet | Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Ethertype: 0x0 mask: 0xFFFF | VLAN EtherType: 0x0 mask: 0xffff | VLAN: 0x1 mask: 0x1fff | User-defined: 0x0 mask: 0xffffffffffffffff | Action: Direct to queue 1
After:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan 0x0001 m 0xf000 \ | action 1 |rmgr: Cannot insert RX class rule: Operation not supported
--- drivers/net/ethernet/intel/igc/igc.h | 1 + drivers/net/ethernet/intel/igc/igc_ethtool.c | 28 +++++++++++++++++--- 2 files changed, 26 insertions(+), 3 deletions(-)
drivers/net/ethernet/intel/igc/igc.h +1 -0
@@ -537,6 +537,7 @@ struct igc_nfc_filter {u16 etype;__be16 vlan_etype;u16 vlan_tci; +u16 vlan_tci_mask;u8 src_addr[ETH_ALEN ];u8 dst_addr[ETH_ALEN ];u8 user_data[8 ];
drivers/net/ethernet/intel/igc/igc_ethtool.c +25 -3
@@ -950,6 +950,7 @@ static int igc_ethtool_set_coalesce(struct net_device *netdev, }#define ETHER_TYPE_FULL_MASK ((__force __be16)~0) +#define VLAN_TCI_FULL_MASK ((__force __be16)~0)static int igc_ethtool_get_nfc_rule (struct igc_adapter *adapter,struct ethtool_rxnfc *cmd) {
@@ -981,7 +982,7 @@ static int igc_ethtool_get_nfc_rule(struct igc_adapter *adapter,if (rule->filter.match_flags &IGC_FILTER_FLAG_VLAN_TCI ) { fsp->flow_type |=FLOW_EXT ; fsp->h_ext.vlan_tci =htons (rule->filter.vlan_tci); - fsp->m_ext.vlan_tci =htons (VLAN_PRIO_MASK ); + fsp->m_ext.vlan_tci =htons (rule->filter.vlan_tci_mask); }if (rule->filter.match_flags &IGC_FILTER_FLAG_DST_MAC_ADDR ) {
@@ -1216,6 +1217,7 @@ static void igc_ethtool_init_nfc_rule(struct igc_nfc_rule *rule,if ((fsp->flow_type &FLOW_EXT ) && fsp->m_ext.vlan_tci) { rule->filter.vlan_tci =ntohs (fsp->h_ext.vlan_tci); + rule->filter.vlan_tci_mask =ntohs (fsp->m_ext.vlan_tci); rule->filter.match_flags |=IGC_FILTER_FLAG_VLAN_TCI ; }
@@ -1253,11 +1255,19 @@ static void igc_ethtool_init_nfc_rule(struct igc_nfc_rule *rule,memcpy (rule->filter.user_mask, fsp->m_ext.data,sizeof (fsp->m_ext.data)); } -/* When multiple filter options or user data or vlan etype is set, use a -* flex filter. +/* The i225/i226 has various different filters. Flex filters provide a +* way to match up to the first 128 bytes of a packet. Use them for: +* a) For specific user data +* b) For VLAN EtherType +* c) For full TCI match +* d) Or in case multiple filter criteria are set +* +* Otherwise, use the simple MAC, VLAN PRIO or EtherType filters. */ if ((rule->filter.match_flags &IGC_FILTER_FLAG_USER_DATA ) || (rule->filter.match_flags &IGC_FILTER_FLAG_VLAN_ETYPE ) || + ((rule->filter.match_flags &IGC_FILTER_FLAG_VLAN_TCI ) && + rule->filter.vlan_tci_mask ==ntohs (VLAN_TCI_FULL_MASK )) || (rule->filter.match_flags & (rule->filter.match_flags -1 ))) rule->flex = true;else
@@ -1327,6 +1337,18 @@ static int igc_ethtool_add_nfc_rule(struct igc_adapter *adapter,return -EINVAL ; } +/* There are two ways to match the VLAN TCI: +* 1. Match on PCP field and use vlan prio filter for it +* 2. Match on complete TCI field and use flex filter for it +*/ +if ((fsp->flow_type &FLOW_EXT ) && + fsp->m_ext.vlan_tci && + fsp->m_ext.vlan_tci !=htons (VLAN_PRIO_MASK ) && + fsp->m_ext.vlan_tci !=VLAN_TCI_FULL_MASK ) { +netdev_dbg (netdev,"VLAN mask not supported\n" ); +return -EOPNOTSUPP ; + } +if (fsp->location >=IGC_MAX_RXNFC_RULES ) {netdev_dbg (netdev,"Invalid location\n" );return -EINVAL ;
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 13/59 igc: Check VLAN EtherType mask
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kurt Kanzenbach <[email protected]>
[ Upstream commit 7afd49a38e73afd57ff62c8d1cf5af760c4d49c0 ]
Currently the driver accepts VLAN EtherType steering rules regardless of the configured mask. And things might fail silently or with confusing error messages to the user. The VLAN EtherType can only be matched by full mask. Therefore, add a check for that.
For instance the following rule is invalid, but the driver accepts it and ignores the user specified mask:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 \ | m 0x00ff action 0 |Added rule with ID 63 |root@host:~# ethtool --show-ntuple enp3s0 |4 RX rings available |Total 1 rules | |Filter: 63 | Flow Type: Raw Ethernet | Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Ethertype: 0x0 mask: 0xFFFF | VLAN EtherType: 0x8100 mask: 0x0 | VLAN: 0x0 mask: 0xffff | User-defined: 0x0 mask: 0xffffffffffffffff | Action: Direct to queue 0
After:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 \ | m 0x00ff action 0 |rmgr: Cannot insert RX class rule: Operation not supported
--- drivers/net/ethernet/intel/igc/igc_ethtool.c | 8 ++++++++ 1 file changed, 8 insertions(+)
drivers/net/ethernet/intel/igc/igc_ethtool.c +8 -0
@@ -1349,6 +1349,14 @@ static int igc_ethtool_add_nfc_rule(struct igc_adapter *adapter,return -EOPNOTSUPP ; } +/* VLAN EtherType can only be matched by full mask. */ +if ((fsp->flow_type &FLOW_EXT ) && + fsp->m_ext.vlan_etype && + fsp->m_ext.vlan_etype !=ETHER_TYPE_FULL_MASK ) { +netdev_dbg (netdev,"VLAN EtherType mask not supported\n" ); +return -EOPNOTSUPP ; + } +if (fsp->location >=IGC_MAX_RXNFC_RULES ) {netdev_dbg (netdev,"Invalid location\n" );return -EINVAL ;
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 14/59 ASoC: fsl_rpmsg: Fix error handler with pm_runtime_enable
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chancel Liu <[email protected]>
[ Upstream commit f9d378fc68c43fd41b35133edec9cd902ec334ec ]
There is error message when defer probe happens:
fsl_rpmsg rpmsg_audio: Unbalanced pm_runtime_enable!
Fix the error handler with pm_runtime_enable.
--- sound/soc/fsl/fsl_rpmsg.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
sound/soc/fsl/fsl_rpmsg.c +8 -2
@@ -191,7 +191,7 @@ static int fsl_rpmsg_probe(struct platform_device *pdev) ret =devm_snd_soc_register_component (&pdev->dev, &fsl_component, &fsl_rpmsg_dai,1 );if (ret) -return ret; + goto err_pm_disable; rpmsg->card_pdev = platform_device_register_data(&pdev->dev, "imx-audio-rpmsg",
@@ -201,16 +201,22 @@ static int fsl_rpmsg_probe(struct platform_device *pdev)if (IS_ERR (rpmsg->card_pdev)) {dev_err (&pdev->dev,"failed to register rpmsg card\n" ); ret =PTR_ERR (rpmsg->card_pdev); -return ret; + goto err_pm_disable; }return 0 ; + +err_pm_disable: +pm_runtime_disable (&pdev->dev); +return ret; }static int fsl_rpmsg_remove (struct platform_device *pdev) {struct fsl_rpmsg *rpmsg =platform_get_drvdata (pdev); +pm_runtime_disable (&pdev->dev); +if (rpmsg->card_pdev)platform_device_unregister (rpmsg->card_pdev);
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 15/59 mlxbf_gige: fix receive packet race condition
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Thompson <[email protected]>
[ Upstream commit dcea1bd45e6d111cc8fc1aaefa7e31694089bda3 ]
Under heavy traffic, the BlueField Gigabit interface can become unresponsive. This is due to a possible race condition in the mlxbf_gige_rx_packet function, where the function exits with producer and consumer indices equal but there are remaining packet(s) to be processed. In order to prevent this situation, read receive consumer index *before* the HW replenish so that the mlxbf_gige_rx_packet function returns an accurate return value even if a packet is received into just-replenished buffer prior to exiting this routine. If the just-replenished buffer is received and occupies the last RX ring entry, the interface would not recover and instead would encounter RX packet drops related to internal buffer shortages since the driver RX logic is not being triggered to drain the RX ring. This patch will address and prevent this "ring full" condition.
--- drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_rx.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_rx.c +7 -2
@@ -267,6 +267,13 @@ static bool mlxbf_gige_rx_packet(struct mlxbf_gige *priv, int *rx_pkts) priv->stats.rx_truncate_errors++; } +/* Read receive consumer index before replenish so that this routine +* returns accurate return value even if packet is received into +* just-replenished buffer prior to exiting this routine. +*/ + rx_ci =readq (priv->base +MLXBF_GIGE_RX_CQE_PACKET_CI ); + rx_ci_rem = rx_ci % priv->rx_q_entries; +/* Let hardware know we've replenished one buffer */ rx_pi++;
@@ -279,8 +286,6 @@ static bool mlxbf_gige_rx_packet(struct mlxbf_gige *priv, int *rx_pkts) rx_pi_rem = rx_pi % priv->rx_q_entries;if (rx_pi_rem ==0 ) priv->valid_polarity ^=1 ; - rx_ci =readq (priv->base +MLXBF_GIGE_RX_CQE_PACKET_CI ); - rx_ci_rem = rx_ci % priv->rx_q_entries;if (skb)netif_receive_skb (skb);
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 16/59 net: sched: em_text: fix possible memory leak in em_text_destroy()
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hangyu Hua <[email protected]>
[ Upstream commit 8fcb0382af6f1ef50936f1be05b8149eb2f88496 ]
m->data needs to be freed when em_text_destroy is called.
--- net/sched/em_text.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
net/sched/em_text.c +3 -1
@@ -97,8 +97,10 @@ static int em_text_change(struct net *net, void *data, int len,static void em_text_destroy (struct tcf_ematch *m) { -if (EM_TEXT_PRIV (m) &&EM_TEXT_PRIV (m)->config) +if (EM_TEXT_PRIV (m) &&EM_TEXT_PRIV (m)->config) {textsearch_destroy (EM_TEXT_PRIV (m)->config); +kfree (EM_TEXT_PRIV (m)); + } }static int em_text_dump (struct sk_buff *skb,struct tcf_ematch *m)
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 17/59 r8169: Fix PCI error on system resume
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kai-Heng Feng <[email protected]>
[ Upstream commit 9c476269bff2908a20930c58085bf0b05ebd569a ]
Some r8168 NICs stop working upon system resume:
[ 688.051096] r8169 0000:02:00.1 enp2s0f1: rtl_ep_ocp_read_cond == 0 (loop: 10, delay: 10000). [ 688.175131] r8169 0000:02:00.1 enp2s0f1: Link is Down ... [ 691.534611] r8169 0000:02:00.1 enp2s0f1: PCI error (cmd = 0x0407, status_errs = 0x0000)
Not sure if it's related, but those NICs have a BMC device at function
0:
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Realtek RealManage BMC [10ec:816e] (rev 1a)
Trial and error shows that increase the loop wait on rtl_ep_ocp_read_cond to 30 can eliminate the issue, so let rtl8168ep_driver_start() to wait a bit longer.
--- drivers/net/ethernet/realtek/r8169_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/realtek/r8169_main.c +1 -1
@@ -1191,7 +1191,7 @@ static void rtl8168ep_driver_start(struct rtl8169_private *tp) {r8168ep_ocp_write (tp,0x01 ,0x180 ,OOB_CMD_DRIVER_START );r8168ep_ocp_write (tp,0x01 ,0x30 ,r8168ep_ocp_read (tp,0x30 ) |0x01 ); -rtl_loop_wait_high (tp, &rtl_ep_ocp_read_cond,10000 ,10 ); +rtl_loop_wait_high (tp, &rtl_ep_ocp_read_cond,10000 ,30 ); }static void rtl8168_driver_start (struct rtl8169_private *tp)
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 18/59 net: Implement missing getsockopt(SO_TIMESTAMPING_NEW)
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jörn-Thorben Hinz <[email protected]>
[ Upstream commit 7f6ca95d16b96567ce4cf458a2790ff17fa620c3 ]
Commit 9718475e6908 ("socket: Add SO_TIMESTAMPING_NEW") added the new socket option SO_TIMESTAMPING_NEW. Setting the option is handled in sk_setsockopt(), querying it was not handled in sk_getsockopt(), though.
Following remarks on an earlier submission of this patch, keep the old behavior of getsockopt(SO_TIMESTAMPING_OLD) which returns the active flags even if they actually have been set through SO_TIMESTAMPING_NEW.
The new getsockopt(SO_TIMESTAMPING_NEW) is stricter, returning flags only if they have been set through the same option.
--- net/core/sock.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)
net/core/sock.c +9 -2
@@ -1534,9 +1534,16 @@ int sock_getsockopt(struct socket *sock, int level, int optname,break ;case SO_TIMESTAMPING_OLD : +case SO_TIMESTAMPING_NEW : lv =sizeof (v.timestamping); - v.timestamping.flags = sk->sk_tsflags; - v.timestamping.bind_phc = sk->sk_bind_phc; +/* For the later-added case SO_TIMESTAMPING_NEW: Be strict about only +* returning the flags when they were set through the same option. +* Don't change the beviour for the old case SO_TIMESTAMPING_OLD. +*/ +if (optname ==SO_TIMESTAMPING_OLD ||sock_flag (sk,SOCK_TSTAMP_NEW )) { + v.timestamping.flags = sk->sk_tsflags; + v.timestamping.bind_phc = sk->sk_bind_phc; + }break ;case SO_RCVTIMEO_OLD :
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 19/59 can: raw: add support for SO_TXTIME/SCM_TXTIME
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marc Kleine-Budde <[email protected]>
[ Upstream commit 51a0d5e51178fcd147c1b8fdab2ed16b561326db ]
This patch calls into sock_cmsg_send() to parse the user supplied control information into a struct sockcm_cookie. Then assign the requested transmit time to the skb.
This makes it possible to use the Earliest TXTIME First (ETF) packet scheduler with the CAN_RAW protocol. The user can send a CAN_RAW frame with a TXTIME and the kernel (with the ETF scheduler) will take care of sending it to the network interface.
Stable-dep-of: 7f6ca95d16b9 ("net: Implement missing getsockopt(SO_TIMESTAMPING_NEW)")
--- net/can/raw.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
net/can/raw.c +10 -1
@@ -780,6 +780,7 @@ static int raw_sendmsg(struct socket *sock, struct msghdr *msg, size_t size) {struct sock *sk = sock->sk;struct raw_sock *ro =raw_sk (sk); +struct sockcm_cookie sockc;struct sk_buff *skb;struct net_device *dev;int ifindex;
@@ -825,11 +826,19 @@ static int raw_sendmsg(struct socket *sock, struct msghdr *msg, size_t size)if (err <0 ) goto free_skb; -skb_setup_tx_timestamp (skb, sk->sk_tsflags); +sockcm_init (&sockc, sk); +if (msg->msg_controllen) { + err =sock_cmsg_send (sk, msg, &sockc); +if (unlikely (err)) + goto free_skb; + } skb->dev = dev; skb->sk = sk; skb->priority = sk->sk_priority; + skb->tstamp = sockc.transmit_time; + +skb_setup_tx_timestamp (skb, sockc.tsflags); err =can_send (skb, ro->loopback);
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 20/59 can: raw: add support for SO_MARK
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marc Kleine-Budde <[email protected]>
[ Upstream commit 0826e82b8a32e646b7b32ba8b68ba30812028e47 ]
Add support for SO_MARK to the CAN_RAW protocol. This makes it possible to add traffic control filters based on the fwmark.
Stable-dep-of: 7f6ca95d16b9 ("net: Implement missing getsockopt(SO_TIMESTAMPING_NEW)")
--- net/can/raw.c | 1 + 1 file changed, 1 insertion(+)
net/can/raw.c +1 -0
@@ -836,6 +836,7 @@ static int raw_sendmsg(struct socket *sock, struct msghdr *msg, size_t size) skb->dev = dev; skb->sk = sk; skb->priority = sk->sk_priority; + skb->mark = sk->sk_mark; skb->tstamp = sockc.transmit_time;skb_setup_tx_timestamp (skb, sockc.tsflags);
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 21/59 net-timestamp: extend SOF_TIMESTAMPING_OPT_ID to HW timestamps
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vadim Fedorenko <[email protected]>
[ Upstream commit 8ca5a5790b9a1ce147484d2a2c4e66d2553f3d6c ]
When the feature was added it was enabled for SW timestamps only but with current hardware the same out-of-order timestamps can be seen. Let's expand the area for the feature to all types of timestamps.
Stable-dep-of: 7f6ca95d16b9 ("net: Implement missing getsockopt(SO_TIMESTAMPING_NEW)")
--- net/ipv4/ip_output.c | 2 +- net/ipv6/ip6_output.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
net/ipv4/ip_output.c +1 -1
@@ -990,7 +990,7 @@ static int __ip_append_data(struct sock *sk, mtu = cork->gso_size ?IP_MAX_MTU : cork->fragsize; paged = !!cork->gso_size; -if (cork->tx_flags &SKBTX_ANY_SW_TSTAMP && +if (cork->tx_flags &SKBTX_ANY_TSTAMP && sk->sk_tsflags &SOF_TIMESTAMPING_OPT_ID ) tskey =atomic_inc_return (&sk->sk_tskey) -1 ;
net/ipv6/ip6_output.c +1 -1
@@ -1484,7 +1484,7 @@ static int __ip6_append_data(struct sock *sk, mtu = cork->gso_size ?IP6_MAX_MTU : cork->fragsize; orig_mtu = mtu; -if (cork->tx_flags &SKBTX_ANY_SW_TSTAMP && +if (cork->tx_flags &SKBTX_ANY_TSTAMP && sk->sk_tsflags &SOF_TIMESTAMPING_OPT_ID ) tskey =atomic_inc_return (&sk->sk_tskey) -1 ;
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 22/59 ARM: sun9i: smp: Fix array-index-out-of-bounds read in sunxi_mc_smp_init
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stefan Wahren <[email protected]>
[ Upstream commit 72ad3b772b6d393701df58ba1359b0bb346a19ed ]
Running a multi-arch kernel (multi_v7_defconfig) on a Raspberry Pi 3B+ with enabled CONFIG_UBSAN triggers the following warning:
UBSAN: array-index-out-of-bounds in arch/arm/mach-sunxi/mc_smp.c:810:29 index 2 is out of range for type 'sunxi_mc_smp_data [2]' CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc6-00248-g5254c0cbc92d Hardware name: BCM2835 unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x40/0x4c dump_stack_lvl from ubsan_epilogue+0x8/0x34 ubsan_epilogue from __ubsan_handle_out_of_bounds+0x78/0x80 __ubsan_handle_out_of_bounds from sunxi_mc_smp_init+0xe4/0x4cc sunxi_mc_smp_init from do_one_initcall+0xa0/0x2fc do_one_initcall from kernel_init_freeable+0xf4/0x2f4 kernel_init_freeable from kernel_init+0x18/0x158 kernel_init from ret_from_fork+0x14/0x28
Since the enabled method couldn't match with any entry from sunxi_mc_smp_data, the value of the index shouldn't be used right after the loop. So move it after the check of ret in order to have a valid index.
--- arch/arm/mach-sunxi/mc_smp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/mach-sunxi/mc_smp.c +2 -2
@@ -808,12 +808,12 @@ static int __init sunxi_mc_smp_init(void)break ; } - is_a83t = sunxi_mc_smp_data[i].is_a83t; -of_node_put (node);if (ret)return -ENODEV ; + is_a83t = sunxi_mc_smp_data[i].is_a83t; +if (!sunxi_mc_smp_cpu_table_init ())return -EINVAL ;
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 23/59 sfc: fix a double-free bug in efx_probe_filters
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zhipeng Lu <[email protected]>
[ Upstream commit d5a306aedba34e640b11d7026dbbafb78ee3a5f6 ]
In efx_probe_filters, the channel->rps_flow_id is freed in a efx_for_each_channel marco when success equals to 0. However, after the following call chain:
ef100_net_open
|-> efx_probe_filters
|-> ef100_net_stop
|-> efx_remove_filters
The channel->rps_flow_id is freed again in the efx_for_each_channel of efx_remove_filters, triggering a double-free bug.
--- drivers/net/ethernet/sfc/rx_common.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/net/ethernet/sfc/rx_common.c +3 -1
@@ -837,8 +837,10 @@ int efx_probe_filters(struct efx_nic *efx) }if (!success) { -efx_for_each_channel (channel, efx) +efx_for_each_channel (channel, efx) {kfree (channel->rps_flow_id); + channel->rps_flow_id =NULL ; + } efx->type->filter_table_remove (efx); rc = -ENOMEM ; goto out_unlock;
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 24/59 net: bcmgenet: Fix FCS generation for fragmented skbuffs
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Adrian Cinal <[email protected]>
[ Upstream commit e584f2ff1e6cc9b1d99e8a6b0f3415940d1b3eb3 ]
The flag DMA_TX_APPEND_CRC was only written to the first DMA descriptor in the TX path, where each descriptor corresponds to a single skbuff fragment (or the skbuff head). This led to packets with no FCS appearing on the wire if the kernel allocated the packet in fragments, which would always happen when using PACKET_MMAP/TPACKET (cf. tpacket_fill_skb() in net/af_packet.c).
--- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/net/ethernet/broadcom/genet/bcmgenet.c +3 -1
@@ -2090,8 +2090,10 @@ static netdev_tx_t bcmgenet_xmit(struct sk_buff *skb, struct net_device *dev)/* Note: if we ever change from DMA_TX_APPEND_CRC below we * will need to restore software padding of "runt" packets */ + len_stat |=DMA_TX_APPEND_CRC ; +if (!i) { - len_stat |=DMA_TX_APPEND_CRC |DMA_SOP ; + len_stat |=DMA_SOP ;if (skb->ip_summed ==CHECKSUM_PARTIAL ) len_stat |=DMA_TX_DO_CSUM ; }
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 25/59 netfilter: nft_immediate: drop chain reference counter on error
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pablo Neira Ayuso <[email protected]>
[ Upstream commit b29be0ca8e816119ccdf95cc7d7c7be9bde005f1 ]
In the init path, nft_data_init() bumps the chain reference counter, decrement it on error by following the error path which calls nft_data_release() to restore it.
--- net/netfilter/nft_immediate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
net/netfilter/nft_immediate.c +1 -1
@@ -78,7 +78,7 @@ static int nft_immediate_init(const struct nft_ctx *ctx,case NFT_GOTO : err =nf_tables_bind_chain (ctx, chain);if (err <0 ) -return err; + goto err1;break ;default :break ;
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 26/59 net: Save and restore msg_namelen in sock_sendmsg
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marc Dionne <[email protected]>
[ Upstream commit 01b2885d9415152bcb12ff1f7788f500a74ea0ed ]
Commit 86a7e0b69bd5 ("net: prevent rewrite of msg_name in sock_sendmsg()") made sock_sendmsg save the incoming msg_name pointer and restore it before returning, to insulate the caller against msg_name being changed by the called code. If the address length was also changed however, we may return with an inconsistent structure where the length doesn't match the address, and attempts to reuse it may lead to lost packets.
For example, a kernel that doesn't have commit 1c5950fc6fe9 ("udp6: fix potential access to stale information") will replace a v4 mapped address with its ipv4 equivalent, and shorten namelen accordingly from 28 to 16. If the caller attempts to reuse the resulting msg structure, it will have the original ipv6 (v4 mapped) address but an incorrect v4 length.
--- net/socket.c | 2 ++ 1 file changed, 2 insertions(+)
net/socket.c +2 -0
@@ -728,6 +728,7 @@ int sock_sendmsg(struct socket *sock, struct msghdr *msg) {struct sockaddr_storage *save_addr = (struct sockaddr_storage *)msg->msg_name;struct sockaddr_storage address; +int save_len = msg->msg_namelen;int ret;if (msg->msg_name) {
@@ -737,6 +738,7 @@ int sock_sendmsg(struct socket *sock, struct msghdr *msg) ret =__sock_sendmsg (sock, msg); msg->msg_name = save_addr; + msg->msg_namelen = save_len;return ret; }
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 27/59 i40e: fix use-after-free in i40e_aqc_add_filters()
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ke Xiao <[email protected]>
[ Upstream commit 6a15584e99db8918b60e507539c7446375dcf366 ]
Commit 3116f59c12bd ("i40e: fix use-after-free in i40e_sync_filters_subtask()") avoided use-after-free issues, by increasing refcount during update the VSI filter list to the HW. However, it missed the unicast situation.
When deleting an unicast FDB entry, the i40e driver will release the mac_filter, and i40e_service_task will concurrently request firmware to add the mac_filter, which will lead to the following use-after-free issue.
Fix again for both netdev->uc and netdev->mc.
BUG: KASAN: use-after-free in i40e_aqc_add_filters+0x55c/0x5b0 [i40e] Read of size 2 at addr ffff888eb3452d60 by task kworker/8:7/6379 CPU: 8 PID: 6379 Comm: kworker/8:7 Kdump: loaded Tainted: G Workqueue: i40e i40e_service_task [i40e] Call Trace: dump_stack+0x71/0xab print_address_description+0x6b/0x290 kasan_report+0x14a/0x2b0 i40e_aqc_add_filters+0x55c/0x5b0 [i40e] i40e_sync_vsi_filters+0x1676/0x39c0 [i40e] i40e_service_task+0x1397/0x2bb0 [i40e] process_one_work+0x56a/0x11f0 worker_thread+0x8f/0xf40 kthread+0x2a0/0x390 ret_from_fork+0x1f/0x40 Allocated by task 21948: kasan_kmalloc+0xa6/0xd0 kmem_cache_alloc_trace+0xdb/0x1c0 i40e_add_filter+0x11e/0x520 [i40e] i40e_addr_sync+0x37/0x60 [i40e] __hw_addr_sync_dev+0x1f5/0x2f0 i40e_set_rx_mode+0x61/0x1e0 [i40e] dev_uc_add_excl+0x137/0x190 i40e_ndo_fdb_add+0x161/0x260 [i40e] rtnl_fdb_add+0x567/0x950 rtnetlink_rcv_msg+0x5db/0x880 netlink_rcv_skb+0x254/0x380 netlink_unicast+0x454/0x610 netlink_sendmsg+0x747/0xb00 sock_sendmsg+0xe2/0x120 __sys_sendto+0x1ae/0x290 __x64_sys_sendto+0xdd/0x1b0 do_syscall_64+0xa0/0x370 entry_SYSCALL_64_after_hwframe+0x65/0xca Freed by task 21948: __kasan_slab_free+0x137/0x190 kfree+0x8b/0x1b0 __i40e_del_filter+0x116/0x1e0 [i40e] i40e_del_mac_filter+0x16c/0x300 [i40e] i40e_addr_unsync+0x134/0x1b0 [i40e] __hw_addr_sync_dev+0xff/0x2f0 i40e_set_rx_mode+0x61/0x1e0 [i40e] dev_uc_del+0x77/0x90 rtnl_fdb_del+0x6a5/0x860 rtnetlink_rcv_msg+0x5db/0x880 netlink_rcv_skb+0x254/0x380 netlink_unicast+0x454/0x610 netlink_sendmsg+0x747/0xb00 sock_sendmsg+0xe2/0x120 __sys_sendto+0x1ae/0x290 __x64_sys_sendto+0xdd/0x1b0 do_syscall_64+0xa0/0x370 entry_SYSCALL_64_after_hwframe+0x65/0xca
--- drivers/net/ethernet/intel/i40e/i40e_main.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/net/ethernet/intel/i40e/i40e_main.c +7 -1
@@ -102,12 +102,18 @@ static struct workqueue_struct *i40e_wq;static void netdev_hw_addr_refcnt (struct i40e_mac_filter *f,struct net_device *netdev,int delta) { +struct netdev_hw_addr_list *ha_list;struct netdev_hw_addr *ha;if (!f || !netdev)return ; -netdev_for_each_mc_addr (ha, netdev) { +if (is_unicast_ether_addr (f->macaddr) ||is_link_local_ether_addr (f->macaddr)) + ha_list = &netdev->uc; +else + ha_list = &netdev->mc; + +netdev_hw_addr_list_for_each (ha, ha_list) {if (ether_addr_equal (ha->addr, f->macaddr)) { ha->refcount += delta;if (ha->refcount <=0 )
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 28/59 ASoC: meson: g12a-toacodec: Validate written enum values
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mark Brown <[email protected]>
[ Upstream commit 3150b70e944ead909260285dfb5707d0bedcf87b ]
When writing to an enum we need to verify that the value written is valid for the enumeration, the helper function snd_soc_item_enum_to_val() doesn't do it since it needs to return an unsigned (and in any case we'd need to check the return value).
--- sound/soc/meson/g12a-toacodec.c | 3 +++ 1 file changed, 3 insertions(+)
sound/soc/meson/g12a-toacodec.c +3 -0
@@ -71,6 +71,9 @@ static int g12a_toacodec_mux_put_enum(struct snd_kcontrol *kcontrol,struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;unsigned int mux, reg; +if (ucontrol->value.enumerated.item[0 ] >= e->items) +return -EINVAL ; + mux =snd_soc_enum_item_to_val (e, ucontrol->value.enumerated.item[0 ]);regmap_field_read (priv->field_dat_sel, ®);
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 29/59 ASoC: meson: g12a-tohdmitx: Validate written enum values
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mark Brown <[email protected]>
[ Upstream commit 1e001206804be3f3d21f4a1cf16e5d059d75643f ]
When writing to an enum we need to verify that the value written is valid for the enumeration, the helper function snd_soc_item_enum_to_val() doesn't do it since it needs to return an unsigned (and in any case we'd need to check the return value).
--- sound/soc/meson/g12a-tohdmitx.c | 6 ++++++ 1 file changed, 6 insertions(+)
sound/soc/meson/g12a-tohdmitx.c +6 -0
@@ -45,6 +45,9 @@ static int g12a_tohdmitx_i2s_mux_put_enum(struct snd_kcontrol *kcontrol,struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;unsigned int mux, changed; +if (ucontrol->value.enumerated.item[0 ] >= e->items) +return -EINVAL ; + mux =snd_soc_enum_item_to_val (e, ucontrol->value.enumerated.item[0 ]); changed = snd_soc_component_test_bits(component, e->reg, CTRL0_I2S_DAT_SEL,
@@ -93,6 +96,9 @@ static int g12a_tohdmitx_spdif_mux_put_enum(struct snd_kcontrol *kcontrol,struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;unsigned int mux, changed; +if (ucontrol->value.enumerated.item[0 ] >= e->items) +return -EINVAL ; + mux =snd_soc_enum_item_to_val (e, ucontrol->value.enumerated.item[0 ]); changed = snd_soc_component_test_bits(component, TOHDMITX_CTRL0, CTRL0_SPDIF_SEL,
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 30/59 ASoC: meson: g12a-toacodec: Fix event generation
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mark Brown <[email protected]>
[ Upstream commit 172c88244b5f2d3375403ebb504d407be0fded59 ]
When a control changes value the return value from _put() should be 1 so we get events generated to userspace notifying applications of the change. We are checking if there has been a change and exiting early if not but we are not providing the correct return value in the latter case, fix this.
--- sound/soc/meson/g12a-toacodec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/meson/g12a-toacodec.c +1 -1
@@ -104,7 +104,7 @@ static int g12a_toacodec_mux_put_enum(struct snd_kcontrol *kcontrol,snd_soc_dapm_mux_update_power (dapm, kcontrol, mux, e,NULL ); -return 0 ; +return 1 ; } static SOC_ENUM_SINGLE_DECL(g12a_toacodec_mux_enum, TOACODEC_CTRL0,
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 31/59 ASoC: meson: g12a-tohdmitx: Fix event generation for S/PDIF mux
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mark Brown <[email protected]>
[ Upstream commit b036d8ef3120b996751495ce25994eea58032a98 ]
When a control changes value the return value from _put() should be 1 so we get events generated to userspace notifying applications of the change. While the I2S mux gets this right the S/PDIF mux does not, fix the return value.
--- sound/soc/meson/g12a-tohdmitx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/meson/g12a-tohdmitx.c +1 -1
@@ -118,7 +118,7 @@ static int g12a_tohdmitx_spdif_mux_put_enum(struct snd_kcontrol *kcontrol,snd_soc_dapm_mux_update_power (dapm, kcontrol, mux, e,NULL ); -return 0 ; +return 1 ; } static SOC_ENUM_SINGLE_DECL(g12a_tohdmitx_spdif_mux_enum, TOHDMITX_CTRL0,
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 32/59 i40e: Restore VF MSI-X state during PCI reset
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrii Staikov <[email protected]>
[ Upstream commit 371e576ff3e8580d91d49026e5d5faebf5565558 ]
During a PCI FLR the MSI-X Enable flag in the VF PCI MSI-X capability register will be cleared. This can lead to issues when a VF is assigned to a VM because in these cases the VF driver receives no indication of the PF PCI error/reset and additionally it is incapable of restoring the cleared flag in the hypervisor configuration space without fully reinitializing the driver interrupt functionality.
Since the VF driver is unable to easily resolve this condition on its own, restore the VF MSI-X flag during the PF PCI reset handling.
--- drivers/net/ethernet/intel/i40e/i40e_main.c | 3 +++ .../ethernet/intel/i40e/i40e_virtchnl_pf.c | 26 +++++++++++++++++++ .../ethernet/intel/i40e/i40e_virtchnl_pf.h | 3 +++ 3 files changed, 32 insertions(+)
drivers/net/ethernet/intel/i40e/i40e_main.c +3 -0
@@ -16424,6 +16424,9 @@ static void i40e_pci_error_reset_done(struct pci_dev *pdev)return ;i40e_reset_and_rebuild (pf, false, false); +#ifdef CONFIG_PCI_IOV +i40e_restore_all_vfs_msi_state (pdev); +#endif /* CONFIG_PCI_IOV */ }/**
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c +26 -0
@@ -152,6 +152,32 @@ void i40e_vc_notify_reset(struct i40e_pf *pf) (u8 *)&pfe, sizeof(struct virtchnl_pf_event)); } +#ifdef CONFIG_PCI_IOV +void i40e_restore_all_vfs_msi_state (struct pci_dev *pdev) +{ +u16 vf_id; +u16 pos; + +/* Continue only if this is a PF */ +if (!pdev->is_physfn) +return ; + +if (!pci_num_vf (pdev)) +return ; + + pos =pci_find_ext_capability (pdev,PCI_EXT_CAP_ID_SRIOV ); +if (pos) { +struct pci_dev *vf_dev =NULL ; + +pci_read_config_word (pdev, pos +PCI_SRIOV_VF_DID , &vf_id); +while ((vf_dev =pci_get_device (pdev->vendor, vf_id, vf_dev))) { +if (vf_dev->is_virtfn && vf_dev->physfn == pdev) +pci_restore_msi_state (vf_dev); + } + } +} +#endif /* CONFIG_PCI_IOV */ +/** * i40e_vc_notify_vf_reset * @vf: pointer to the VF structure
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h +3 -0
@@ -135,6 +135,9 @@ int i40e_ndo_set_vf_spoofchk(struct net_device *netdev, int vf_id, bool enable);void i40e_vc_notify_link_state (struct i40e_pf *pf);void i40e_vc_notify_reset (struct i40e_pf *pf); +#ifdef CONFIG_PCI_IOV +void i40e_restore_all_vfs_msi_state (struct pci_dev *pdev); +#endif /* CONFIG_PCI_IOV */ int i40e_get_vf_stats (struct net_device *netdev,int vf_id,struct ifla_vf_stats *vf_stats);
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 33/59 igc: Fix hicredit calculation
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rodrigo Cataldo <[email protected]>
[ Upstream commit 947dfc8138dfaeb6e966e2d661de89eb203e3064 ]
According to the Intel Software Manual for I225, Section 7.5.2.7, hicredit should be multiplied by the constant link-rate value, 0x7736.
Currently, the old constant link-rate value, 0x7735, from the boards supported on igb are being used, most likely due to a copy'n'paste, as the rest of the logic is the same for both drivers.
Update hicredit accordingly.
--- drivers/net/ethernet/intel/igc/igc_tsn.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/intel/igc/igc_tsn.c +1 -1
@@ -185,7 +185,7 @@ static int igc_tsn_enable_offload(struct igc_adapter *adapter)wr32 (IGC_TQAVCC (i), tqavcc);wr32 (IGC_TQAVHC (i), -0x80000000 + ring->hicredit *0x7735 ); +0x80000000 + ring->hicredit *0x7736 ); }else {/* Disable any CBS for the queue */ txqctl &= ~(IGC_TXQCTL_QAV_SEL_MASK );
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 34/59 net/qla3xxx: fix potential memleak in ql_alloc_buffer_queues
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dinghao Liu <[email protected]>
[ Upstream commit 89f45c30172c80e55c887f32f1af8e184124577b ]
When dma_alloc_coherent() fails, we should free qdev->lrg_buf to prevent potential memleak.
--- drivers/net/ethernet/qlogic/qla3xxx.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/net/ethernet/qlogic/qla3xxx.c +2 -0
@@ -2589,6 +2589,7 @@ static int ql_alloc_buffer_queues(struct ql3_adapter *qdev)if (qdev->lrg_buf_q_alloc_virt_addr ==NULL ) {netdev_err (qdev->ndev,"lBufQ failed\n" ); +kfree (qdev->lrg_buf);return -ENOMEM ; } qdev->lrg_buf_q_virt_addr = qdev->lrg_buf_q_alloc_virt_addr;
@@ -2613,6 +2614,7 @@ static int ql_alloc_buffer_queues(struct ql3_adapter *qdev) qdev->lrg_buf_q_alloc_size, qdev->lrg_buf_q_alloc_virt_addr, qdev->lrg_buf_q_alloc_phy_addr); +kfree (qdev->lrg_buf);return -ENOMEM ; }
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 35/59 octeontx2-af: Dont enable Pause frames by default
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hariprasad Kelam <[email protected]>
[ Upstream commit d957b51f7ed66dbe6102f1bba0587fdfc0119a94 ]
Current implementation is such that 802.3x pause frames are enabled by default. As CGX and RPM blocks support PFC (priority flow control) also, instead of driver enabling one between them enable them upon request from PF or its VFs. Also add support to disable pause frames in driver unbind.
Stable-dep-of: a0d9528f6daf ("octeontx2-af: Always configure NIX TX link credits based on max frame size")
--- .../net/ethernet/marvell/octeontx2/af/cgx.c | 41 ++++++---------- .../net/ethernet/marvell/octeontx2/af/rpm.c | 47 +++++-------------- .../ethernet/marvell/octeontx2/af/rvu_nix.c | 8 ---- .../marvell/octeontx2/nic/otx2_common.c | 1 + .../ethernet/marvell/octeontx2/nic/otx2_pf.c | 15 +++--- .../ethernet/marvell/octeontx2/nic/otx2_vf.c | 12 +++-- 6 files changed, 44 insertions(+), 80 deletions(-)
drivers/net/ethernet/marvell/octeontx2/af/cgx.c +14 -27
@@ -789,21 +789,8 @@ static void cgx_lmac_pause_frm_config(void *cgxd, int lmac_id, bool enable)if (!is_lmac_valid (cgx, lmac_id))return ; -if (enable) { -/* Enable receive pause frames */ - cfg =cgx_read (cgx, lmac_id,CGXX_SMUX_RX_FRM_CTL ); - cfg |=CGX_SMUX_RX_FRM_CTL_CTL_BCK ; -cgx_write (cgx, lmac_id,CGXX_SMUX_RX_FRM_CTL , cfg); - - cfg =cgx_read (cgx, lmac_id,CGXX_GMP_GMI_RXX_FRM_CTL ); - cfg |=CGX_GMP_GMI_RXX_FRM_CTL_CTL_BCK ; -cgx_write (cgx, lmac_id,CGXX_GMP_GMI_RXX_FRM_CTL , cfg); - -/* Enable pause frames transmission */ - cfg =cgx_read (cgx, lmac_id,CGXX_SMUX_TX_CTL ); - cfg |=CGX_SMUX_TX_CTL_L2P_BP_CONV ; -cgx_write (cgx, lmac_id,CGXX_SMUX_TX_CTL , cfg); +if (enable) {/* Set pause time and interval */ cgx_write (cgx, lmac_id,CGXX_SMUX_TX_PAUSE_PKT_TIME ,DEFAULT_PAUSE_TIME );
@@ -820,21 +807,21 @@ static void cgx_lmac_pause_frm_config(void *cgxd, int lmac_id, bool enable) cfg &= ~0xFFFFULL ;cgx_write (cgx, lmac_id,CGXX_GMP_GMI_TX_PAUSE_PKT_INTERVAL , cfg | (DEFAULT_PAUSE_TIME /2 )); - }else { -/* ALL pause frames received are completely ignored */ - cfg =cgx_read (cgx, lmac_id,CGXX_SMUX_RX_FRM_CTL ); - cfg &= ~CGX_SMUX_RX_FRM_CTL_CTL_BCK ; -cgx_write (cgx, lmac_id,CGXX_SMUX_RX_FRM_CTL , cfg); + } - cfg =cgx_read (cgx, lmac_id,CGXX_GMP_GMI_RXX_FRM_CTL ); - cfg &= ~CGX_GMP_GMI_RXX_FRM_CTL_CTL_BCK ; -cgx_write (cgx, lmac_id,CGXX_GMP_GMI_RXX_FRM_CTL , cfg); +/* ALL pause frames received are completely ignored */ + cfg =cgx_read (cgx, lmac_id,CGXX_SMUX_RX_FRM_CTL ); + cfg &= ~CGX_SMUX_RX_FRM_CTL_CTL_BCK ; +cgx_write (cgx, lmac_id,CGXX_SMUX_RX_FRM_CTL , cfg); -/* Disable pause frames transmission */ - cfg =cgx_read (cgx, lmac_id,CGXX_SMUX_TX_CTL ); - cfg &= ~CGX_SMUX_TX_CTL_L2P_BP_CONV ; -cgx_write (cgx, lmac_id,CGXX_SMUX_TX_CTL , cfg); - } + cfg =cgx_read (cgx, lmac_id,CGXX_GMP_GMI_RXX_FRM_CTL ); + cfg &= ~CGX_GMP_GMI_RXX_FRM_CTL_CTL_BCK ; +cgx_write (cgx, lmac_id,CGXX_GMP_GMI_RXX_FRM_CTL , cfg); + +/* Disable pause frames transmission */ + cfg =cgx_read (cgx, lmac_id,CGXX_SMUX_TX_CTL ); + cfg &= ~CGX_SMUX_TX_CTL_L2P_BP_CONV ; +cgx_write (cgx, lmac_id,CGXX_SMUX_TX_CTL , cfg); }void cgx_lmac_ptp_config (void *cgxd,int lmac_id,bool enable)
drivers/net/ethernet/marvell/octeontx2/af/rpm.c +13 -34
62 lines not on this page · raw message
drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c +0 -8
@@ -296,7 +296,6 @@ static int nix_interface_init(struct rvu *rvu, u16 pcifunc, int type, int nixlf,struct rvu_hwinfo *hw = rvu->hw;struct sdp_node_info *sdp_info;int pkind, pf, vf, lbkid, vfid; -struct mac_ops *mac_ops;u8 cgx_id, lmac_id;bool from_vf;int err;
@@ -326,13 +325,6 @@ static int nix_interface_init(struct rvu *rvu, u16 pcifunc, int type, int nixlf,cgx_set_pkind (rvu_cgx_pdata (cgx_id, rvu), lmac_id, pkind);rvu_npc_set_pkind (rvu, pkind, pfvf); - mac_ops =get_mac_ops (rvu_cgx_pdata (cgx_id, rvu)); - -/* By default we enable pause frames */ -if ((pcifunc &RVU_PFVF_FUNC_MASK ) ==0 ) - mac_ops->mac_enadis_pause_frm (rvu_cgx_pdata (cgx_id, - rvu), - lmac_id, true, true);break ;case NIX_INTF_TYPE_LBK : vf = (pcifunc &RVU_PFVF_FUNC_MASK ) -1 ;
drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c +1 -0
@@ -262,6 +262,7 @@ int otx2_config_pause_frm(struct otx2_nic *pfvf)mutex_unlock (&pfvf->mbox.lock);return err; } +EXPORT_SYMBOL (otx2_config_pause_frm);int otx2_set_flowkey_cfg (struct otx2_nic *pfvf) {
drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c +8 -7
@@ -1785,9 +1785,6 @@ int otx2_open(struct net_device *netdev)if (pf->linfo.link_up && !(pf->pcifunc &RVU_PFVF_FUNC_MASK ))otx2_handle_link_event (pf); -/* Restore pause frame settings */ -otx2_config_pause_frm (pf); -/* Install DMAC Filters */ if (pf->flags &OTX2_FLAG_DMACFLTR_SUPPORT )otx2_dmacflt_reinstall_flows (pf);
@@ -2777,10 +2774,6 @@ static int otx2_probe(struct pci_dev *pdev, const struct pci_device_id *id)/* Enable link notifications */ otx2_cgx_config_linkevents (pf, true); -/* Enable pause frames by default */ - pf->flags |=OTX2_FLAG_RX_PAUSE_ENABLED ; - pf->flags |=OTX2_FLAG_TX_PAUSE_ENABLED ; -return 0 ; err_pf_sriov_init:
@@ -2924,6 +2917,14 @@ static void otx2_remove(struct pci_dev *pdev)if (pf->flags &OTX2_FLAG_RX_TSTAMP_ENABLED )otx2_config_hw_rx_tstamp (pf, false); +/* Disable 802.3x pause frames */ +if (pf->flags &OTX2_FLAG_RX_PAUSE_ENABLED || + (pf->flags &OTX2_FLAG_TX_PAUSE_ENABLED )) { + pf->flags &= ~OTX2_FLAG_RX_PAUSE_ENABLED ; + pf->flags &= ~OTX2_FLAG_TX_PAUSE_ENABLED ; +otx2_config_pause_frm (pf); + } +cancel_work_sync (&pf->reset_task);/* Disable link notifications */ otx2_cgx_config_linkevents (pf, false);
drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c +8 -4
@@ -695,10 +695,6 @@ static int otx2vf_probe(struct pci_dev *pdev, const struct pci_device_id *id)if (err) goto err_unreg_netdev; -/* Enable pause frames by default */ - vf->flags |=OTX2_FLAG_RX_PAUSE_ENABLED ; - vf->flags |=OTX2_FLAG_TX_PAUSE_ENABLED ; -return 0 ; err_unreg_netdev:
@@ -732,6 +728,14 @@ static void otx2vf_remove(struct pci_dev *pdev) vf =netdev_priv (netdev); +/* Disable 802.3x pause frames */ +if (vf->flags &OTX2_FLAG_RX_PAUSE_ENABLED || + (vf->flags &OTX2_FLAG_TX_PAUSE_ENABLED )) { + vf->flags &= ~OTX2_FLAG_RX_PAUSE_ENABLED ; + vf->flags &= ~OTX2_FLAG_TX_PAUSE_ENABLED ; +otx2_config_pause_frm (vf); + } +cancel_work_sync (&vf->reset_task);otx2_unregister_dl (vf);unregister_netdev (netdev);
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 36/59 octeontx2-af: Set NIX link credits based on max LMAC
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sunil Goutham <[email protected]>
[ Upstream commit 459f326e995ce6f02f3dc79ca5bc4e2abe33d156 ]
When number of LMACs active on a CGX/RPM are 3, then current NIX link credit config based on per lmac fifo length which inturn is calculated as 'lmac_fifo_len = total_fifo_len / 3', is incorrect. In HW one of the LMAC gets half of the FIFO and rest gets 1/4th.
Stable-dep-of: a0d9528f6daf ("octeontx2-af: Always configure NIX TX link credits based on max frame size")
--- .../net/ethernet/marvell/octeontx2/af/cgx.c | 27 +++++++++++++++ .../marvell/octeontx2/af/lmac_common.h | 1 + .../net/ethernet/marvell/octeontx2/af/rpm.c | 30 ++++++++++++++++ .../net/ethernet/marvell/octeontx2/af/rpm.h | 1 + .../net/ethernet/marvell/octeontx2/af/rvu.h | 2 +- .../ethernet/marvell/octeontx2/af/rvu_cgx.c | 16 +++++++++ .../ethernet/marvell/octeontx2/af/rvu_nix.c | 34 ++++++++++++++----- 7 files changed, 102 insertions(+), 9 deletions(-)
drivers/net/ethernet/marvell/octeontx2/af/cgx.c +27 -0
@@ -505,6 +505,32 @@ static u8 cgx_get_lmac_type(void *cgxd, int lmac_id)return (cfg >>CGX_LMAC_TYPE_SHIFT ) &CGX_LMAC_TYPE_MASK ; } +static u32 cgx_get_lmac_fifo_len (void *cgxd,int lmac_id) +{ +struct cgx *cgx = cgxd; +u8 num_lmacs; +u32 fifo_len; + + fifo_len = cgx->mac_ops->fifo_len; + num_lmacs = cgx->mac_ops->get_nr_lmacs (cgx); + +switch (num_lmacs) { +case 1 : +return fifo_len; +case 2 : +return fifo_len /2 ; +case 3 : +/* LMAC0 gets half of the FIFO, reset 1/4th */ +if (lmac_id ==0 ) +return fifo_len /2 ; +return fifo_len /4 ; +case 4 : +default : +return fifo_len /4 ; + } +return 0 ; +} +/* Configure CGX LMAC in internal loopback mode */ int cgx_lmac_internal_loopback (void *cgxd,int lmac_id,bool enable) {
@@ -1557,6 +1583,7 @@ static struct mac_ops cgx_mac_ops = { .tx_stats_cnt = 18, .get_nr_lmacs = cgx_get_nr_lmacs, .get_lmac_type = cgx_get_lmac_type, + .lmac_fifo_len = cgx_get_lmac_fifo_len, .mac_lmac_intl_lbk = cgx_lmac_internal_loopback, .mac_get_rx_stats = cgx_get_rx_stats, .mac_get_tx_stats = cgx_get_tx_stats,
drivers/net/ethernet/marvell/octeontx2/af/lmac_common.h +1 -0
@@ -76,6 +76,7 @@ struct mac_ops {*/ int (*get_nr_lmacs)(void *cgx);u8 (*get_lmac_type)(void *cgx,int lmac_id); +u32 (*lmac_fifo_len)(void *cgx,int lmac_id);int (*mac_lmac_intl_lbk)(void *cgx,int lmac_id,bool enable);/* Register Stats related functions */
drivers/net/ethernet/marvell/octeontx2/af/rpm.c +30 -0
@@ -22,6 +22,7 @@ static struct mac_ops rpm_mac_ops = { .tx_stats_cnt = 34, .get_nr_lmacs = rpm_get_nr_lmacs, .get_lmac_type = rpm_get_lmac_type, + .lmac_fifo_len = rpm_get_lmac_fifo_len, .mac_lmac_intl_lbk = rpm_lmac_internal_loopback, .mac_get_rx_stats = rpm_get_rx_stats, .mac_get_tx_stats = rpm_get_tx_stats,
@@ -261,6 +262,35 @@ u8 rpm_get_lmac_type(void *rpmd, int lmac_id)return err; } +u32 rpm_get_lmac_fifo_len (void *rpmd,int lmac_id) +{ +rpm_t *rpm = rpmd; +u64 hi_perf_lmac; +u8 num_lmacs; +u32 fifo_len; + + fifo_len = rpm->mac_ops->fifo_len; + num_lmacs = rpm->mac_ops->get_nr_lmacs (rpm); + +switch (num_lmacs) { +case 1 : +return fifo_len; +case 2 : +return fifo_len /2 ; +case 3 : +/* LMAC marked as hi_perf gets half of the FIFO and rest 1/4th */ + hi_perf_lmac =rpm_read (rpm,0 ,CGXX_CMRX_RX_LMACS ); + hi_perf_lmac = (hi_perf_lmac >>4 ) &0x3ULL ; +if (lmac_id == hi_perf_lmac) +return fifo_len /2 ; +return fifo_len /4 ; +case 4 : +default : +return fifo_len /4 ; + } +return 0 ; +} +int rpm_lmac_internal_loopback (void *rpmd,int lmac_id,bool enable) {rpm_t *rpm = rpmd;
drivers/net/ethernet/marvell/octeontx2/af/rpm.h +1 -0
@@ -49,6 +49,7 @@/* Function Declarations */ int rpm_get_nr_lmacs (void *rpmd);u8 rpm_get_lmac_type (void *rpmd,int lmac_id); +u32 rpm_get_lmac_fifo_len (void *rpmd,int lmac_id);int rpm_lmac_internal_loopback (void *rpmd,int lmac_id,bool enable);void rpm_lmac_enadis_rx_pause_fwding (void *rpmd,int lmac_id,bool enable); int rpm_lmac_get_pause_frm_status(void *cgxd, int lmac_id, u8 *tx_pause,
drivers/net/ethernet/marvell/octeontx2/af/rvu.h +1 -1
@@ -813,7 +813,7 @@ u32 rvu_cgx_get_fifolen(struct rvu *rvu);void *rvu_first_cgx_pdata (struct rvu *rvu);int cgxlmac_to_pf (struct rvu *rvu,int cgx_id,int lmac_id);int rvu_cgx_config_tx (void *cgxd,int lmac_id,bool enable); - +u32 rvu_cgx_get_lmac_fifolen (struct rvu *rvu,int cgx,int lmac);int npc_get_nixlf_mcam_index (struct npc_mcam *mcam,u16 pcifunc,int nixlf,int type); bool is_mcam_entry_enabled(struct rvu *rvu, struct npc_mcam *mcam, int blkaddr,
drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c +16 -0
@@ -831,6 +831,22 @@ u32 rvu_cgx_get_fifolen(struct rvu *rvu)return fifo_len; } +u32 rvu_cgx_get_lmac_fifolen (struct rvu *rvu,int cgx,int lmac) +{ +struct mac_ops *mac_ops; +void *cgxd; + + cgxd =rvu_cgx_pdata (cgx, rvu); +if (!cgxd) +return 0 ; + + mac_ops =get_mac_ops (cgxd); +if (!mac_ops->lmac_fifo_len) +return 0 ; + +return mac_ops->lmac_fifo_len (cgxd, lmac); +} +static int rvu_cgx_config_intlbk (struct rvu *rvu,u16 pcifunc,bool en) {int pf =rvu_get_pf (pcifunc);
drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c +26 -8
@@ -4036,9 +4036,13 @@ int rvu_mbox_handler_nix_set_hw_frs(struct rvu *rvu, struct nix_frs_cfg *req,return 0 ;/* Update transmit credits for CGX links */ - lmac_fifo_len = -rvu_cgx_get_fifolen (rvu) / -cgx_get_lmac_cnt (rvu_cgx_pdata (cgx, rvu)); + lmac_fifo_len =rvu_cgx_get_lmac_fifolen (rvu, cgx, lmac); +if (!lmac_fifo_len) { +dev_err (rvu->dev, +"%s: Failed to get CGX/RPM%d:LMAC%d FIFO size\n" , + __func__, cgx, lmac); +return 0 ; + }return nix_config_link_credits (rvu, blkaddr, link, pcifunc, (lmac_fifo_len - req->maxlen) /16 ); }
@@ -4086,7 +4090,10 @@ static void nix_link_config(struct rvu *rvu, int blkaddr,struct rvu_hwinfo *hw = rvu->hw;int cgx, lmac_cnt, slink, link;u16 lbk_max_frs, lmac_max_frs; +unsigned long lmac_bmap;u64 tx_credits, cfg; +u64 lmac_fifo_len; +int iter;rvu_get_lbk_link_max_frs (rvu, &lbk_max_frs);rvu_get_lmac_link_max_frs (rvu, &lmac_max_frs);
@@ -4120,12 +4127,23 @@ static void nix_link_config(struct rvu *rvu, int blkaddr,/* Skip when cgx is not available or lmac cnt is zero */ if (lmac_cnt <=0 )continue ; - tx_credits = ((rvu_cgx_get_fifolen (rvu) / lmac_cnt) - - lmac_max_frs) /16 ; -/* Enable credits and set credit pkt count to max allowed */ - cfg = (tx_credits <<12 ) | (0x1FF <<2 ) |BIT_ULL (1 ); slink = cgx * hw->lmac_per_cgx; -for (link = slink; link < (slink + lmac_cnt); link++) { + +/* Get LMAC id's from bitmap */ + lmac_bmap =cgx_get_lmac_bmap (rvu_cgx_pdata (cgx, rvu)); +for_each_set_bit (iter, &lmac_bmap,MAX_LMAC_PER_CGX ) { + lmac_fifo_len =rvu_cgx_get_lmac_fifolen (rvu, cgx, iter); +if (!lmac_fifo_len) { +dev_err (rvu->dev, +"%s: Failed to get CGX/RPM%d:LMAC%d FIFO size\n" , + __func__, cgx, iter); +continue ; + } + tx_credits = (lmac_fifo_len - lmac_max_frs) /16 ; +/* Enable credits and set credit pkt count to max allowed */ + cfg = (tx_credits <<12 ) | (0x1FF <<2 ) |BIT_ULL (1 ); + + link = iter + slink; nix_hw->tx_credits[link] = tx_credits;rvu_write64 (rvu, blkaddr,NIX_AF_TX_LINKX_NORM_CREDIT (link), cfg);
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 37/59 octeontx2-af: Always configure NIX TX link credits based on max frame size
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Naveen Mamindlapalli <[email protected]>
[ Upstream commit a0d9528f6daf7fe8de217fa80a94d2989d2a57a7 ]
Currently the NIX TX link credits are initialized based on the max frame size that can be transmitted on a link but when the MTU is changed, the NIX TX link credits are reprogrammed by the SW based on the new MTU value. Since SMQ max packet length is programmed to max frame size by default, there is a chance that NIX TX may stall while sending a max frame sized packet on the link with insufficient credits to send the packet all at once. This patch avoids stall issue by not changing the link credits dynamically when the MTU is changed.
--- .../ethernet/marvell/octeontx2/af/rvu_nix.c | 110 +----------------- 1 file changed, 3 insertions(+), 107 deletions(-)
drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c +3 -107
@@ -3877,90 +3877,18 @@ static void nix_find_link_frs(struct rvu *rvu, req->minlen = minlen; } -static int -nix_config_link_credits (struct rvu *rvu,int blkaddr,int link, -u16 pcifunc,u64 tx_credits) -{ -struct rvu_hwinfo *hw = rvu->hw; -int pf =rvu_get_pf (pcifunc); -u8 cgx_id =0 , lmac_id =0 ; -unsigned long poll_tmo; -bool restore_tx_en =0 ; -struct nix_hw *nix_hw; -u64 cfg, sw_xoff =0 ; -u32 schq =0 ; -u32 credits; -int rc; - - nix_hw =get_nix_hw (rvu->hw, blkaddr); -if (!nix_hw) -return NIX_AF_ERR_INVALID_NIXBLK ; - -if (tx_credits == nix_hw->tx_credits[link]) -return 0 ; - -/* Enable cgx tx if disabled for credits to be back */ -if (is_pf_cgxmapped (rvu, pf)) { -rvu_get_cgx_lmac_id (rvu->pf2cgxlmac_map[pf], &cgx_id, &lmac_id); - restore_tx_en = !rvu_cgx_config_tx (rvu_cgx_pdata (cgx_id, rvu), - lmac_id, true); - } - -mutex_lock (&rvu->rsrc_lock); -/* Disable new traffic to link */ -if (hw->cap.nix_shaping) { - schq =nix_get_tx_link (rvu, pcifunc); - sw_xoff =rvu_read64 (rvu, blkaddr,NIX_AF_TL1X_SW_XOFF (schq)); -rvu_write64 (rvu, blkaddr, -NIX_AF_TL1X_SW_XOFF (schq),BIT_ULL (0 )); - } - - rc =NIX_AF_ERR_LINK_CREDITS ; - poll_tmo = jiffies +usecs_to_jiffies (200000 ); -/* Wait for credits to return */ -do { -if (time_after (jiffies, poll_tmo)) - goto exit; -usleep_range (100 ,200 ); - - cfg =rvu_read64 (rvu, blkaddr, -NIX_AF_TX_LINKX_NORM_CREDIT (link)); - credits = (cfg >>12 ) &0xFFFFFULL ; - }while (credits != nix_hw->tx_credits[link]); - - cfg &= ~(0xFFFFFULL <<12 ); - cfg |= (tx_credits <<12 ); -rvu_write64 (rvu, blkaddr,NIX_AF_TX_LINKX_NORM_CREDIT (link), cfg); - rc =0 ; - - nix_hw->tx_credits[link] = tx_credits; - -exit: -/* Enable traffic back */ -if (hw->cap.nix_shaping && !sw_xoff) -rvu_write64 (rvu, blkaddr,NIX_AF_TL1X_SW_XOFF (schq),0 ); - -/* Restore state of cgx tx */ -if (restore_tx_en) -rvu_cgx_config_tx (rvu_cgx_pdata (cgx_id, rvu), lmac_id, false); - -mutex_unlock (&rvu->rsrc_lock); -return rc; -} -int rvu_mbox_handler_nix_set_hw_frs (struct rvu *rvu,struct nix_frs_cfg *req,struct msg_rsp *rsp) {struct rvu_hwinfo *hw = rvu->hw;u16 pcifunc = req->hdr.pcifunc;int pf =rvu_get_pf (pcifunc); -int blkaddr, schq, link =-1 ; -struct nix_txsch *txsch; -u64 cfg, lmac_fifo_len; +int blkaddr, link =-1 ;struct nix_hw *nix_hw;struct rvu_pfvf *pfvf;u8 cgx =0 , lmac =0 ;u16 max_mtu; +u64 cfg; blkaddr =rvu_get_blkaddr (rvu,BLKTYPE_NIX , pcifunc);if (blkaddr <0 )
@@ -3981,25 +3909,6 @@ int rvu_mbox_handler_nix_set_hw_frs(struct rvu *rvu, struct nix_frs_cfg *req,if (req->update_minlen && req->minlen <NIC_HW_MIN_FRS )return NIX_AF_ERR_FRS_INVALID ; -/* Check if requester wants to update SMQ's */ -if (!req->update_smq) - goto rx_frscfg; - -/* Update min/maxlen in each of the SMQ attached to this PF/VF */ - txsch = &nix_hw->txsch[NIX_TXSCH_LVL_SMQ ]; -mutex_lock (&rvu->rsrc_lock); -for (schq =0 ; schq < txsch->schq.max; schq++) { -if (TXSCH_MAP_FUNC (txsch->pfvf_map[schq]) != pcifunc) -continue ; - cfg =rvu_read64 (rvu, blkaddr,NIX_AF_SMQX_CFG (schq)); - cfg = (cfg & ~(0xFFFFULL <<8 )) | ((u64 )req->maxlen <<8 ); -if (req->update_minlen) - cfg = (cfg & ~0x7FULL ) | ((u64 )req->minlen &0x7F ); -rvu_write64 (rvu, blkaddr,NIX_AF_SMQX_CFG (schq), cfg); - } -mutex_unlock (&rvu->rsrc_lock); - -rx_frscfg:/* Check if config is for SDP link */ if (req->sdp_link) {if (!hw->sdp_links)
@@ -4022,7 +3931,6 @@ int rvu_mbox_handler_nix_set_hw_frs(struct rvu *rvu, struct nix_frs_cfg *req,if (link <0 )return NIX_AF_ERR_RX_LINK_INVALID ; - linkcfg:nix_find_link_frs (rvu, req, pcifunc);
@@ -4032,19 +3940,7 @@ int rvu_mbox_handler_nix_set_hw_frs(struct rvu *rvu, struct nix_frs_cfg *req, cfg = (cfg & ~0xFFFFULL ) | req->minlen;rvu_write64 (rvu, blkaddr,NIX_AF_RX_LINKX_CFG (link), cfg); -if (req->sdp_link || pf ==0 ) -return 0 ; - -/* Update transmit credits for CGX links */ - lmac_fifo_len =rvu_cgx_get_lmac_fifolen (rvu, cgx, lmac); -if (!lmac_fifo_len) { -dev_err (rvu->dev, -"%s: Failed to get CGX/RPM%d:LMAC%d FIFO size\n" , - __func__, cgx, lmac); -return 0 ; - } -return nix_config_link_credits (rvu, blkaddr, link, pcifunc, - (lmac_fifo_len - req->maxlen) /16 ); +return 0 ; } int rvu_mbox_handler_nix_set_rx_cfg(struct rvu *rvu, struct nix_rx_cfg *req,
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 38/59 octeontx2-af: Re-enable MAC TX in otx2_stop processing
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Naveen Mamindlapalli <[email protected]>
[ Upstream commit 818ed8933bd17bc91a9fa8b94a898189c546fc1a ]
During QoS scheduling testing with multiple strict priority flows, the netdev tx watchdog timeout routine is invoked when a low priority QoS queue doesn't get a chance to transmit the packets because other high priority flows are completely subscribing the transmit link. The netdev tx watchdog timeout routine will stop MAC RX and TX functionality in otx2_stop() routine before cleanup of HW TX queues which results in SMQ flush errors because the packets belonging to low priority queues will never gets flushed since MAC TX is disabled. This patch fixes the issue by re-enabling MAC TX to ensure the packets in HW pipeline gets flushed properly.
--- drivers/net/ethernet/marvell/octeontx2/af/rvu.h | 1 + .../net/ethernet/marvell/octeontx2/af/rvu_cgx.c | 17 +++++++++++++++++ .../net/ethernet/marvell/octeontx2/af/rvu_nix.c | 8 +++++++- 3 files changed, 25 insertions(+), 1 deletion(-)
drivers/net/ethernet/marvell/octeontx2/af/rvu.h +1 -0
@@ -813,6 +813,7 @@ u32 rvu_cgx_get_fifolen(struct rvu *rvu);void *rvu_first_cgx_pdata (struct rvu *rvu);int cgxlmac_to_pf (struct rvu *rvu,int cgx_id,int lmac_id);int rvu_cgx_config_tx (void *cgxd,int lmac_id,bool enable); +int rvu_cgx_tx_enable (struct rvu *rvu,u16 pcifunc,bool enable);u32 rvu_cgx_get_lmac_fifolen (struct rvu *rvu,int cgx,int lmac);int npc_get_nixlf_mcam_index (struct npc_mcam *mcam,u16 pcifunc,int nixlf,int type);
drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c +17 -0
@@ -456,6 +456,23 @@ int rvu_cgx_config_rxtx(struct rvu *rvu, u16 pcifunc, bool start)return mac_ops->mac_rx_tx_enable (cgxd, lmac_id, start); } +int rvu_cgx_tx_enable (struct rvu *rvu,u16 pcifunc,bool enable) +{ +int pf =rvu_get_pf (pcifunc); +struct mac_ops *mac_ops; +u8 cgx_id, lmac_id; +void *cgxd; + +if (!is_cgx_config_permitted (rvu, pcifunc)) +return LMAC_AF_ERR_PERM_DENIED ; + +rvu_get_cgx_lmac_id (rvu->pf2cgxlmac_map[pf], &cgx_id, &lmac_id); + cgxd =rvu_cgx_pdata (cgx_id, rvu); + mac_ops =get_mac_ops (cgxd); + +return mac_ops->mac_tx_enable (cgxd, lmac_id, enable); +} +int rvu_cgx_config_tx (void *cgxd,int lmac_id,bool enable) {struct mac_ops *mac_ops;
drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c +7 -1
@@ -4447,7 +4447,13 @@ int rvu_mbox_handler_nix_lf_stop_rx(struct rvu *rvu, struct msg_req *req, pfvf =rvu_get_pfvf (rvu, pcifunc);clear_bit (NIXLF_INITIALIZED , &pfvf->flags); -return rvu_cgx_start_stop_io (rvu, pcifunc, false); + err =rvu_cgx_start_stop_io (rvu, pcifunc, false); +if (err) +return err; + +rvu_cgx_tx_enable (rvu, pcifunc, true); + +return 0 ; }void rvu_nix_lf_teardown (struct rvu *rvu,u16 pcifunc,int blkaddr,int nixlf)
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 39/59 asix: Add check for usbnet_get_endpoints
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chen Ni <[email protected]>
[ Upstream commit eaac6a2d26b65511e164772bec6918fcbc61938e ]
Add check for usbnet_get_endpoints() and return the error if it fails in order to transfer the error.
--- drivers/net/usb/ax88172a.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/net/usb/ax88172a.c +3 -1
@@ -161,7 +161,9 @@ static int ax88172a_bind(struct usbnet *dev, struct usb_interface *intf)u8 buf[ETH_ALEN ];struct ax88172a_private *priv; -usbnet_get_endpoints (dev, intf); + ret =usbnet_get_endpoints (dev, intf); +if (ret) +return ret; priv =kzalloc (sizeof (*priv),GFP_KERNEL );if (!priv)
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 40/59 bnxt_en: Remove mis-applied code from bnxt_cfg_ntp_filters()
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Chan <[email protected]>
[ Upstream commit e009b2efb7a8850498796b360043ac25c8d3d28f ]
The 2 lines to check for the BNXT_HWRM_PF_UNLOAD_SP_EVENT bit was mis-applied to bnxt_cfg_ntp_filters() and should have been applied to bnxt_sp_task().
--- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +2 -2
@@ -11749,6 +11749,8 @@ static void bnxt_sp_task(struct work_struct *work)bnxt_cfg_ntp_filters (bp);if (test_and_clear_bit (BNXT_HWRM_EXEC_FWD_REQ_SP_EVENT , &bp->sp_event))bnxt_hwrm_exec_fwd_req (bp); +if (test_and_clear_bit (BNXT_HWRM_PF_UNLOAD_SP_EVENT , &bp->sp_event)) +netdev_info (bp->dev,"Receive PF driver unload event!\n" );if (test_and_clear_bit (BNXT_PERIODIC_STATS_SP_EVENT , &bp->sp_event)) {bnxt_hwrm_port_qstats (bp,0 );bnxt_hwrm_port_qstats_ext (bp,0 );
@@ -12694,8 +12696,6 @@ static void bnxt_cfg_ntp_filters(struct bnxt *bp) } } } -if (test_and_clear_bit (BNXT_HWRM_PF_UNLOAD_SP_EVENT , &bp->sp_event)) -netdev_info (bp->dev,"Receive PF driver unload event!\n" ); }#else
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 41/59 net: Implement missing SO_TIMESTAMPING_NEW cmsg support
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Lange <[email protected]>
[ Upstream commit 382a32018b74f407008615e0e831d05ed28e81cd ]
Commit 9718475e6908 ("socket: Add SO_TIMESTAMPING_NEW") added the new socket option SO_TIMESTAMPING_NEW. However, it was never implemented in __sock_cmsg_send thus breaking SO_TIMESTAMPING cmsg for platforms using SO_TIMESTAMPING_NEW.
--- net/core/sock.c | 1 + 1 file changed, 1 insertion(+)
net/core/sock.c +1 -0
@@ -2551,6 +2551,7 @@ int __sock_cmsg_send(struct sock *sk, struct msghdr *msg, struct cmsghdr *cmsg, sockc->mark = *(u32 *)CMSG_DATA (cmsg);break ;case SO_TIMESTAMPING_OLD : +case SO_TIMESTAMPING_NEW :if (cmsg->cmsg_len !=CMSG_LEN (sizeof (u32)))return -EINVAL ;
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 42/59 selftests: secretmem: floor the memory size to the multiple of page_size
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Muhammad Usama Anjum <[email protected]>
[ Upstream commit 0aac13add26d546ac74c89d2883b3a5f0fbea039 ]
The "locked-in-memory size" limit per process can be non-multiple of page_size. The mmap() fails if we try to allocate locked-in-memory with same size as the allowed limit if it isn't multiple of the page_size because mmap() rounds off the memory size to be allocated to next multiple of page_size.
Fix this by flooring the length to be allocated with mmap() to the previous multiple of the page_size.
This was getting triggered on KernelCI regularly because of different ulimit settings which wasn't multiple of the page_size. Find logs
here: https://linux.kernelci.org/test/plan/id/657654bd8e81e654fae13532/
The bug in was present from the time test was first added.
--- tools/testing/selftests/vm/memfd_secret.c | 3 +++ 1 file changed, 3 insertions(+)
tools/testing/selftests/vm/memfd_secret.c +3 -0
@@ -62,6 +62,9 @@ static void test_mlock_limit(int fd)char *mem; len = mlock_limit_cur; +if (len % page_size !=0 ) + len = (len/page_size) * page_size; + mem =mmap (NULL , len, prot, mode, fd,0 );if (mem ==MAP_FAILED ) {fail ("unable to mmap secret memory\n" );
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 43/59 mm/memory-failure: check the mapcount of the precise page
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthew Wilcox (Oracle) <[email protected]>
[ Upstream commit c79c5a0a00a9457718056b588f312baadf44e471 ]
A process may map only some of the pages in a folio, and might be missed if it maps the poisoned page but not the head page. Or it might be unnecessarily hit if it maps the head page, but not the poisoned page.
--- mm/memory-failure.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
mm/memory-failure.c +3 -3
@@ -1331,7 +1331,7 @@ static bool hwpoison_user_mappings(struct page *p, unsigned long pfn,* This check implies we don't kill processes if their pages * are in the swap cache early. Those are always late kills. */ -if (!page_mapped (hpage)) +if (!page_mapped (p))return true;if (PageKsm (p)) {
@@ -1397,10 +1397,10 @@ static bool hwpoison_user_mappings(struct page *p, unsigned long pfn, } } - unmap_success = !page_mapped (hpage); + unmap_success = !page_mapped (p);if (!unmap_success)pr_err ("Memory failure: %#lx: failed to unmap page (mapcount=%d)\n" , - pfn,page_mapcount (hpage)); + pfn,page_mapcount (p));/* * try_to_unmap() might put mlocked page in lru cache, so call
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerPATCH 44/59 firewire: ohci: suppress unexpected system reboot in AMD Ryzen machines and ASM108x/VT630x PCIe cards
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Sakamoto <[email protected]>
commit ac9184fbb8478dab4a0724b279f94956b69be827 upstream.
VIA VT6306/6307/6308 provides PCI interface compliant to 1394 OHCI. When the hardware is combined with Asmedia ASM1083/1085 PCIe-to-PCI bus bridge, it appears that accesses to its 'Isochronous Cycle Timer' register (offset 0xf0 on PCI memory space) often causes unexpected system reboot in any type of AMD Ryzen machine (both 0x17 and 0x19 families). It does not appears in the other type of machine (AMD pre-Ryzen machine, Intel machine, at least), or in the other OHCI 1394 hardware (e.g. Texas Instruments).
The issue explicitly appears at a commit dcadfd7f7c74 ("firewire: core:
use union for callback of transaction completion") added to v6.5 kernel. It changed 1394 OHCI driver to access to the register every time to dispatch local asynchronous transaction. However, the issue exists in older version of kernel as long as it runs in AMD Ryzen machine, since the access to the register is required to maintain bus time. It is not hard to imagine that users experience the unexpected system reboot when generating bus reset by plugging any devices in, or reading the register by time-aware application programs; e.g. audio sample processing.
This commit suppresses the unexpected system reboot in the combination of hardware. It avoids the access itself. As a result, the software stack can not provide the hardware time anymore to unit drivers, userspace applications, and nodes in the same IEEE 1394 bus. It brings apparent disadvantage since time-aware application programs require it, while time-unaware applications are available again; e.g. sbp2.
--- drivers/firewire/ohci.c | 51 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+)
drivers/firewire/ohci.c +51 -0
@@ -279,6 +279,51 @@ static char ohci_driver_name[] = KBUILD_#define QUIRK_TI_SLLZ059 0x20#define QUIRK_IR_WAKE 0x40 +// On PCI Express Root Complex in any type of AMD Ryzen machine, VIA VT6306/6307/6308 with Asmedia +// ASM1083/1085 brings an inconvenience that the read accesses to 'Isochronous Cycle Timer' register +// (at offset 0xf0 in PCI I/O space) often causes unexpected system reboot. The mechanism is not +// clear, since the read access to the other registers is enough safe; e.g. 'Node ID' register, +// while it is probable due to detection of any type of PCIe error. +#define QUIRK_REBOOT_BY_CYCLE_TIMER_READ 0x80000000 + +#if IS_ENABLED (CONFIG_X86 ) + +static bool has_reboot_by_cycle_timer_read_quirk (const struct fw_ohci *ohci) +{ +return !!(ohci->quirks &QUIRK_REBOOT_BY_CYCLE_TIMER_READ ); +} + +#define PCI_DEVICE_ID_ASMEDIA_ASM108X 0x1080 + +static bool detect_vt630x_with_asm1083_on_amd_ryzen_machine (const struct pci_dev *pdev) +{ +const struct pci_dev *pcie_to_pci_bridge; + +// Detect any type of AMD Ryzen machine. +if (!static_cpu_has (X86_FEATURE_ZEN )) +return false; + +// Detect VIA VT6306/6307/6308. +if (pdev->vendor !=PCI_VENDOR_ID_VIA ) +return false; +if (pdev->device !=PCI_DEVICE_ID_VIA_VT630X ) +return false; + +// Detect Asmedia ASM1083/1085. + pcie_to_pci_bridge = pdev->bus->self; +if (pcie_to_pci_bridge->vendor !=PCI_VENDOR_ID_ASMEDIA ) +return false; +if (pcie_to_pci_bridge->device !=PCI_DEVICE_ID_ASMEDIA_ASM108X ) +return false; + +return true; +} + +#else +#define has_reboot_by_cycle_timer_read_quirk (ohci) false +#define detect_vt630x_with_asm1083_on_amd_ryzen_machine (pdev) false +#endif +/* In case of multiple matches in ohci_quirks[], only the first one is used. */ static const struct { unsigned short vendor, device, revision, flags;
@@ -1713,6 +1758,9 @@ static u32 get_cycle_time(struct fw_ohcis32 diff01, diff12;int i; +if (has_reboot_by_cycle_timer_read_quirk (ohci)) +return 0 ; + c2 =reg_read (ohci, OHCI1394_IsochronousCycleTimer);if (ohci->quirks &QUIRK_CYCLE_TIMER ) {
@@ -3615,6 +3663,9 @@ static int pci_probe(struct pci_dev *devif (param_quirks) ohci->quirks = param_quirks; +if (detect_vt630x_with_asm1083_on_amd_ryzen_machine (dev)) + ohci->quirks |=QUIRK_REBOOT_BY_CYCLE_TIMER_READ ; +/* * Because dma_alloc_coherent() allocates at least one page, * we save space by using a common buffer for the AR request/
Greg Kroah-Hartman
maintainerPATCH 45/59 x86/kprobes: fix incorrect return address calculation in kprobe_emulate_call_indirect
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jinghao Jia <[email protected]>
commit f5d03da48d062966c94f0199d20be0b3a37a7982 upstream.
kprobe_emulate_call_indirect currently uses int3_emulate_call to emulate indirect calls. However, int3_emulate_call always assumes the size of the call to be 5 bytes when calculating the return address. This is incorrect for register-based indirect calls in x86, which can be either 2 or 3 bytes depending on whether REX prefix is used. At kprobe runtime, the incorrect return address causes control flow to land onto the wrong place after return -- possibly not a valid instruction boundary. This can lead to a panic like the following:
[ 7.308204][ C1] BUG: unable to handle page fault for address: 000000000002b4d8 [ 7.308883][ C1] #PF: supervisor read access in kernel mode [ 7.309168][ C1] #PF: error_code(0x0000) - not-present page [ 7.309461][ C1] PGD 0 P4D 0 [ 7.309652][ C1] Oops: 0000 [#1] SMP [ 7.309929][ C1] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.7.0-rc5-trace-for-next #6 [ 7.310397][ C1] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 [ 7.311068][ C1] RIP: 0010:__common_interrupt+0x52/0xc0 [ 7.311349][ C1] Code: 01 00 4d 85 f6 74 39 49 81 fe 00 f0 ff ff 77 30 4c 89 f7 4d 8b 5e 68 41 ba 91 76 d8 42 45 03 53 fc 74 02 0f 0b cc ff d3 65 48 <8b> 05 30 c7 ff 7e 65 4c 89 3d 28 c7 ff 7e 5b 41 5c 41 5e 41 5f c3 [ 7.312512][ C1] RSP: 0018:ffffc900000e0fd0 EFLAGS: 00010046 [ 7.312899][ C1] RAX: 0000000000000001 RBX: 0000000000000023 RCX: 0000000000000001 [ 7.313334][ C1] RDX: 00000000000003cd RSI: 0000000000000001 RDI: ffff888100d302a4 [ 7.313702][ C1] RBP: 0000000000000001 R08: 0ef439818636191f R09: b1621ff338a3b482 [ 7.314146][ C1] R10: ffffffff81e5127b R11: ffffffff81059810 R12: 0000000000000023 [ 7.314509][ C1] R13: 0000000000000000 R14: ffff888100d30200 R15: 0000000000000000 [ 7.314951][ C1] FS: 0000000000000000(0000) GS:ffff88813bc80000(0000) knlGS:0000000000000000 [ 7.315396][ C1] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7.315691][ C1] CR2: 000000000002b4d8 CR3: 0000000003028003 CR4: 0000000000370ef0 [ 7.316153][ C1] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 7.316508][ C1] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 7.316948][ C1] Call Trace: [ 7.317123][ C1] <IRQ> [ 7.317279][ C1] ? __die_body+0x64/0xb0 [ 7.317482][ C1] ? page_fault_oops+0x248/0x370 [ 7.317712][ C1] ? __wake_up+0x96/0xb0 [ 7.317964][ C1] ? exc_page_fault+0x62/0x130 [ 7.318211][ C1] ? asm_exc_page_fault+0x22/0x30 [ 7.318444][ C1] ? __cfi_native_send_call_func_single_ipi+0x10/0x10 [ 7.318860][ C1] ? default_idle+0xb/0x10 [ 7.319063][ C1] ? __common_interrupt+0x52/0xc0 [ 7.319330][ C1] common_interrupt+0x78/0x90 [ 7.319546][ C1] </IRQ> [ 7.319679][ C1] <TASK> [ 7.319854][ C1] asm_common_interrupt+0x22/0x40 [ 7.320082][ C1] RIP: 0010:default_idle+0xb/0x10 [ 7.320309][ C1] Code: 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 b8 0c 67 40 a5 66 90 0f 00 2d 09 b9 3b 00 fb f4 <fa> c3 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 b8 0c 67 40 a5 e9 [ 7.321449][ C1] RSP: 0018:ffffc9000009bee8 EFLAGS: 00000256 [ 7.321808][ C1] RAX: ffff88813bca8b68 RBX: 0000000000000001 RCX: 000000000001ef0c [ 7.322227][ C1] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 000000000001ef0c [ 7.322656][ C1] RBP: ffffc9000009bef8 R08: 8000000000000000 R09: 00000000000008c2 [ 7.323083][ C1] R10: 0000000000000000 R11: ffffffff81058e70 R12: 0000000000000000 [ 7.323530][ C1] R13: ffff8881002b30c0 R14: 0000000000000000 R15: 0000000000000000 [ 7.323948][ C1] ? __cfi_lapic_next_deadline+0x10/0x10 [ 7.324239][ C1] default_idle_call+0x31/0x50 [ 7.324464][ C1] do_idle+0xd3/0x240 [ 7.324690][ C1] cpu_startup_entry+0x25/0x30 [ 7.324983][ C1] start_secondary+0xb4/0xc0 [ 7.325217][ C1] secondary_startup_64_no_verify+0x179/0x17b [ 7.325498][ C1] </TASK> [ 7.325641][ C1] Modules linked in: [ 7.325906][ C1] CR2: 000000000002b4d8 [ 7.326104][ C1] ---[ end trace 0000000000000000 ]--- [ 7.326354][ C1] RIP: 0010:__common_interrupt+0x52/0xc0 [ 7.326614][ C1] Code: 01 00 4d 85 f6 74 39 49 81 fe 00 f0 ff ff 77 30 4c 89 f7 4d 8b 5e 68 41 ba 91 76 d8 42 45 03 53 fc 74 02 0f 0b cc ff d3 65 48 <8b> 05 30 c7 ff 7e 65 4c 89 3d 28 c7 ff 7e 5b 41 5c 41 5e 41 5f c3 [ 7.327570][ C1] RSP: 0018:ffffc900000e0fd0 EFLAGS: 00010046 [ 7.327910][ C1] RAX: 0000000000000001 RBX: 0000000000000023 RCX: 0000000000000001 [ 7.328273][ C1] RDX: 00000000000003cd RSI: 0000000000000001 RDI: ffff888100d302a4 [ 7.328632][ C1] RBP: 0000000000000001 R08: 0ef439818636191f R09: b1621ff338a3b482 [ 7.329223][ C1] R10: ffffffff81e5127b R11: ffffffff81059810 R12: 0000000000000023 [ 7.329780][ C1] R13: 0000000000000000 R14: ffff888100d30200 R15: 0000000000000000 [ 7.330193][ C1] FS: 0000000000000000(0000) GS:ffff88813bc80000(0000) knlGS:0000000000000000 [ 7.330632][ C1] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7.331050][ C1] CR2: 000000000002b4d8 CR3: 0000000003028003 CR4: 0000000000370ef0 [ 7.331454][ C1] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 7.331854][ C1] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 7.332236][ C1] Kernel panic - not syncing: Fatal exception in interrupt [ 7.332730][ C1] Kernel Offset: disabled [ 7.333044][ C1] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
The relevant assembly code is (from objdump, faulting address highlighted):
ffffffff8102ed9d: 41 ff d3 call *%r11 ffffffff8102eda0: 65 48 <8b> 05 30 c7 ff mov %gs:0x7effc730(%rip),%rax
The emulation incorrectly sets the return address to be ffffffff8102ed9d
+ 0x5 = ffffffff8102eda2, which is the 8b byte in the middle of the next mov. This in turn causes incorrect subsequent instruction decoding and eventually triggers the page fault above.
Instead of invoking int3_emulate_call, perform push and jmp emulation directly in kprobe_emulate_call_indirect. At this point we can obtain the instruction size from p->ainsn.size so that we can calculate the correct return address.
--- arch/x86/kernel/kprobes/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
arch/x86/kernel/kprobes/core.c +2 -1
@@ -563,7 +563,8 @@ static void kprobe_emulate_call_indirect {unsigned long offs = addrmode_regoffs[p->ainsn.indirect.reg]; -int3_emulate_call (regs,regs_get_register (regs, offs)); +int3_emulate_push (regs, regs->ip -INT3_INSN_SIZE + p->ainsn.size); +int3_emulate_jmp (regs,regs_get_register (regs, offs)); }NOKPROBE_SYMBOL (kprobe_emulate_call_indirect);
Greg Kroah-Hartman
maintainerPATCH 46/59 i2c: core: Fix atomic xfer check for non-preempt config
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Benjamin Bara <[email protected]>
commit a3368e1186e3ce8e38f78cbca019622095b1f331 upstream.
Since commit aa49c90894d0 ("i2c: core: Run atomic i2c xfer when !preemptible"), the whole reboot/power off sequence on non-preempt kernels is using atomic i2c xfer, as !preemptible() always results to 1.
During device_shutdown(), the i2c might be used a lot and not all busses have implemented an atomic xfer handler. This results in a lot of avoidable noise, like:
[ 12.687169] No atomic I2C transfer handler for 'i2c-0' [ 12.692313] WARNING: CPU: 6 PID: 275 at drivers/i2c/i2c-core.h:40 i2c_smbus_xfer+0x100/0x118
...
Fix this by allowing non-atomic xfer when the interrupts are enabled, as it was before.
--- drivers/i2c/i2c-core.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/i2c/i2c-core.h +3 -1
@@ -3,6 +3,7 @@* i2c-core.h - interfaces internal to the I2C framework */ +#include <linux/kconfig.h> #include <linux/rwsem.h> struct i2c_devinfo {
@@ -29,7 +30,8 @@ int i2c_dev_irq_from_resources(const str*/ static inline bool i2c_in_atomic_xfer_mode (void ) { -return system_state >SYSTEM_RUNNING && !preemptible (); +return system_state >SYSTEM_RUNNING && + (IS_ENABLED (CONFIG_PREEMPT_COUNT ) ? !preemptible () :irqs_disabled ()); }static inline int __i2c_lock_bus_helper (struct i2c_adapter *adap)
Greg Kroah-Hartman
maintainerPATCH 47/59 mm: fix unmap_mapping_range high bits shift bug
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiajun Xie <[email protected]>
commit 9eab0421fa94a3dde0d1f7e36ab3294fc306c99d upstream.
The bug happens when highest bit of holebegin is 1, suppose holebegin is 0x8000000111111000, after shift, hba would be 0xfff8000000111111, then vma_interval_tree_foreach would look it up fail or leads to the wrong result.
error call seq e.g.:
- mmap(..., offset=0x8000000111111000)
|- syscall(mmap, ... unsigned long, off):
|- ksys_mmap_pgoff( ... , off >> PAGE_SHIFT);
here pgoff is correctly shifted to 0x8000000111111, but pass 0x8000000111111000 as holebegin to unmap would then cause terrible result, as shown below:
- unmap_mapping_range(..., loff_t const holebegin)
|- pgoff_t hba = holebegin >> PAGE_SHIFT;
/* hba = 0xfff8000000111111 unexpectedly */The issue happens in Heterogeneous computing, where the device(e.g. gpu) and host share the same virtual address space.
A simple workflow pattern which hit the issue is:
/* host */
1. userspace first mmap a file backed VA range with specified offset. e.g. (offset=0x800..., mmap return: va_a)
2. write some data to the corresponding sys page
e.g. (va_a = 0xAABB)
/* device */
3. gpu workload touches VA, triggers gpu fault and notify the host. /* host */
4. reviced gpu fault notification, then it will:
4.1 unmap host pages and also takes care of cpu tlb
(use unmap_mapping_range with offset=0x800...)
4.2 migrate sys page to device
4.3 setup device page table and resolve device fault.
/* device */
5. gpu workload continued, it accessed va_a and got 0xAABB.
6. gpu workload continued, it wrote 0xBBCC to va_a.
/* host */
7. userspace access va_a, as expected, it will:
7.1 trigger cpu vm fault.
7.2 driver handling fault to migrate gpu local page to host.
8. userspace then could correctly get 0xBBCC from va_a
9. done
But in step 4.1, if we hit the bug this patch mentioned, then userspace would never trigger cpu fault, and still get the old value: 0xAABB.
Making holebegin unsigned first fixes the bug.
--- mm/memory.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
mm/memory.c +2 -2
@@ -3451,8 +3451,8 @@ EXPORT_SYMBOL_GPL(unmap_mapping_pages);void unmap_mapping_range (struct address_space *mapping,loff_t const holebegin,loff_t const holelen,int even_cows) { -pgoff_t hba = holebegin >>PAGE_SHIFT ; -pgoff_t hlen = (holelen +PAGE_SIZE -1 ) >>PAGE_SHIFT ; +pgoff_t hba = (pgoff_t)(holebegin) >>PAGE_SHIFT ; +pgoff_t hlen = ((pgoff_t)(holelen) +PAGE_SIZE -1 ) >>PAGE_SHIFT ;/* Check for overflow. */ if (sizeof (holelen) >sizeof (hlen)) {
Greg Kroah-Hartman
maintainerPATCH 48/59 mmc: meson-mx-sdhc: Fix initialization frozen issue
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ziyang Huang <[email protected]>
commit 8c124d998ea0c9022e247b11ac51f86ec8afa0e1 upstream.
Commit 4bc31edebde5 ("mmc: core: Set HS clock speed before sending HS CMD13") set HS clock (52MHz) before switching to HS mode. For this freq, FCLK_DIV5 will be selected and div value is 10 (reg value is 9). Then we set rx_clk_phase to 11 or 15 which is out of range and make hardware frozen. After we send command request, no irq will be interrupted and the mmc driver will keep to wait for request finished, even durning rebooting.
So let's set it to Phase 90 which should work in most cases. Then let meson_mx_sdhc_execute_tuning() to find the accurate value for data transfer.
If this doesn't work, maybe need to define a factor in dts.
--- drivers/mmc/host/meson-mx-sdhc-mmc.c | 26 +++++--------------------- 1 file changed, 5 insertions(+), 21 deletions(-)
drivers/mmc/host/meson-mx-sdhc-mmc.c +5 -21
@@ -269,7 +269,7 @@ static int meson_mx_sdhc_enable_clks(strstatic int meson_mx_sdhc_set_clk (struct mmc_host *mmc,struct mmc_ios *ios) {struct meson_mx_sdhc_host *host =mmc_priv (mmc); -u32 rx_clk_phase; +u32 val, rx_clk_phase;int ret;meson_mx_sdhc_disable_clks (mmc);
@@ -290,27 +290,11 @@ static int meson_mx_sdhc_set_clk(struct mmc->actual_clock =clk_get_rate (host->sd_clk);/* -* according to Amlogic the following latching points are -* selected with empirical values, there is no (known) formula -* to calculate these. +* Phase 90 should work in most cases. For data transmission, +* meson_mx_sdhc_execute_tuning() will find a accurate value */ -if (mmc->actual_clock >100000000 ) { - rx_clk_phase =1 ; - }else if (mmc->actual_clock >45000000 ) { -if (ios->signal_voltage ==MMC_SIGNAL_VOLTAGE_330 ) - rx_clk_phase =15 ; -else - rx_clk_phase =11 ; - }else if (mmc->actual_clock >=25000000 ) { - rx_clk_phase =15 ; - }else if (mmc->actual_clock >5000000 ) { - rx_clk_phase =23 ; - }else if (mmc->actual_clock >1000000 ) { - rx_clk_phase =55 ; - }else { - rx_clk_phase =1061 ; - } - +regmap_read (host->regmap,MESON_SDHC_CLKC , &val); + rx_clk_phase =FIELD_GET (MESON_SDHC_CLKC_CLK_DIV , val) /4 ; regmap_update_bits(host->regmap, MESON_SDHC_CLK2, MESON_SDHC_CLK2_RX_CLK_PHASE, FIELD_PREP(MESON_SDHC_CLK2_RX_CLK_PHASE,
Greg Kroah-Hartman
maintainerPATCH 49/59 mmc: rpmb: fixes pause retune on all RPMB partitions.
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jorge Ramirez-Ortiz <[email protected]>
commit e7794c14fd73e5eb4a3e0ecaa5334d5a17377c50 upstream.
When RPMB was converted to a character device, it added support for multiple RPMB partitions (Commit 97548575bef3 ("mmc: block: Convert RPMB to a character device").
One of the changes in this commit was transforming the variable target_part defined in __mmc_blk_ioctl_cmd into a bitmask. This inadvertently regressed the validation check done in mmc_blk_part_switch_pre() and mmc_blk_part_switch_post(), so let's fix it.
--- drivers/mmc/core/block.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/mmc/core/block.c +4 -3
@@ -839,9 +839,10 @@ static const struct block_device_operatistatic int mmc_blk_part_switch_pre (struct mmc_card *card,unsigned int part_type) { +const unsigned int mask =EXT_CSD_PART_CONFIG_ACC_RPMB ;int ret =0 ; -if (part_type ==EXT_CSD_PART_CONFIG_ACC_RPMB ) { +if ((part_type & mask) == mask) {if (card->ext_csd.cmdq_en) { ret =mmc_cmdq_disable (card);if (ret)
@@ -856,9 +857,10 @@ static int mmc_blk_part_switch_pre(strucstatic int mmc_blk_part_switch_post (struct mmc_card *card,unsigned int part_type) { +const unsigned int mask =EXT_CSD_PART_CONFIG_ACC_RPMB ;int ret =0 ; -if (part_type ==EXT_CSD_PART_CONFIG_ACC_RPMB ) { +if ((part_type & mask) == mask) {mmc_retune_unpause (card->host);if (card->reenable_cmdq && !card->ext_csd.cmdq_en) ret =mmc_cmdq_enable (card);
@@ -3126,4 +3128,3 @@ module_exit(mmc_blk_exit);MODULE_LICENSE ("GPL" );MODULE_DESCRIPTION ("Multimedia Card (MMC) block device driver" ); -
Greg Kroah-Hartman
maintainerPATCH 50/59 mmc: core: Cancel delayed work before releasing host
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Geert Uytterhoeven <[email protected]>
commit 1036f69e251380573e256568cf814506e3fb9988 upstream.
On RZ/Five SMARC EVK, where probing of SDHI is deferred due to probe deferral of the vqmmc-supply regulator:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/time/timer.c:1738 __run_timers.part.0+0x1d0/0x1e8
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 6.7.0-rc4 #101
Hardware name: Renesas SMARC EVK based on r9a07g043f01 (DT)
epc : __run_timers.part.0+0x1d0/0x1e8
ra : __run_timers.part.0+0x134/0x1e8
epc : ffffffff800771a4 ra : ffffffff80077108 sp : ffffffc800003e60
gp : ffffffff814f5028 tp : ffffffff8140c5c0 t0 : ffffffc800000000
t1 : 0000000000000001 t2 : ffffffff81201300 s0 : ffffffc800003f20
s1 : ffffffd8023bc4a0 a0 : 00000000fffee6b0 a1 : 0004010000400000
a2 : ffffffffc0000016 a3 : ffffffff81488640 a4 : ffffffc800003e60
a5 : 0000000000000000 a6 : 0000000004000000 a7 : ffffffc800003e68
s2 : 0000000000000122 s3 : 0000000000200000 s4 : 0000000000000000
s5 : ffffffffffffffff s6 : ffffffff81488678 s7 : ffffffff814886c0
s8 : ffffffff814f49c0 s9 : ffffffff81488640 s10: 0000000000000000
s11: ffffffc800003e60 t3 : 0000000000000240 t4 : 0000000000000a52
t5 : ffffffd8024ae018 t6 : ffffffd8024ae038
status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003
[<ffffffff800771a4>] __run_timers.part.0+0x1d0/0x1e8
[<ffffffff800771e0>] run_timer_softirq+0x24/0x4a
[<ffffffff80809092>] __do_softirq+0xc6/0x1fa
[<ffffffff80028e4c>] irq_exit_rcu+0x66/0x84
[<ffffffff80800f7a>] handle_riscv_irq+0x40/0x4e
[<ffffffff80808f48>] call_on_irq_stack+0x1c/0x28
---[ end trace 0000000000000000 ]---What happens?
renesas_sdhi_probe()
{
tmio_mmc_host_alloc()
mmc_alloc_host()
INIT_DELAYED_WORK(&host->detect, mmc_rescan);
devm_request_irq(tmio_mmc_irq);
/*
* After this, the interrupt handler may be invoked at any time
*
* tmio_mmc_irq()
* {
* __tmio_mmc_card_detect_irq()
* mmc_detect_change()
* _mmc_detect_change()
* mmc_schedule_delayed_work(&host->detect, delay);
* }
*/
tmio_mmc_host_probe()
tmio_mmc_init_ocr()
-EPROBE_DEFER
tmio_mmc_host_free()
mmc_free_host()
}When expire_timers() runs later, it warns because the MMC host structure containing the delayed work was freed, and now contains an invalid work function pointer.
Fix this by cancelling any pending delayed work before releasing the MMC host structure.
--- drivers/mmc/core/host.c | 1 + 1 file changed, 1 insertion(+)
drivers/mmc/core/host.c +1 -0
@@ -661,6 +661,7 @@ EXPORT_SYMBOL(mmc_remove_host);*/ void mmc_free_host (struct mmc_host *host) { +cancel_delayed_work_sync (&host->detect);mmc_pwrseq_free (host);put_device (&host->class_dev); }
Greg Kroah-Hartman
maintainerPATCH 51/59 mmc: sdhci-sprd: Fix eMMC init failure after hw reset
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wenchao Chen <[email protected]>
commit 8abf77c88929b6d20fa4f9928b18d6448d64e293 upstream.
Some eMMC devices that do not close the auto clk gate after hw reset will cause eMMC initialization to fail. Let's fix this.
--- drivers/mmc/host/sdhci-sprd.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/mmc/host/sdhci-sprd.c +7 -3
@@ -224,15 +224,19 @@ static inline void _sdhci_sprd_set_clock div = ((div &0x300 ) >>2 ) | ((div &0xFF ) <<8 );sdhci_enable_clk (host, div); + val =sdhci_readl (host,SDHCI_SPRD_REG_32_BUSY_POSI ); + mask =SDHCI_SPRD_BIT_OUTR_CLK_AUTO_EN |SDHCI_SPRD_BIT_INNR_CLK_AUTO_EN ;/* Enable CLK_AUTO when the clock is greater than 400K. */ if (clk >400000 ) { - val =sdhci_readl (host,SDHCI_SPRD_REG_32_BUSY_POSI ); - mask =SDHCI_SPRD_BIT_OUTR_CLK_AUTO_EN | -SDHCI_SPRD_BIT_INNR_CLK_AUTO_EN ;if (mask != (val & mask)) { val |= mask;sdhci_writel (host, val,SDHCI_SPRD_REG_32_BUSY_POSI ); } + }else { +if (val & mask) { + val &= ~mask; +sdhci_writel (host, val,SDHCI_SPRD_REG_32_BUSY_POSI ); + } } }
Greg Kroah-Hartman
maintainerPATCH 52/59 net: tls, update curr on splice as well
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: John Fastabend <[email protected]>
commit c5a595000e2677e865a39f249c056bc05d6e55fd upstream.
The curr pointer must also be updated on the splice similar to how we do this for other copy types.
--- net/tls/tls_sw.c | 2 ++ 1 file changed, 2 insertions(+)
net/tls/tls_sw.c +2 -0
@@ -1216,6 +1216,8 @@ alloc_payload: }sk_msg_page_add (msg_pl, page, copy, offset); + msg_pl->sg.copybreak =0 ; + msg_pl->sg.curr = msg_pl->sg.end;sk_mem_charge (sk, copy); offset += copy;
Greg Kroah-Hartman
maintainerPATCH 53/59 ipv6: remove max_size check inline with ipv4
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jon Maxwell <[email protected]>
commit af6d10345ca76670c1b7c37799f0d5576ccef277 upstream.
In ip6_dst_gc() replace:
if (entries > gc_thresh)
With:
if (entries > ops->gc_thresh)
Sending Ipv6 packets in a loop via a raw socket triggers an issue where a route is cloned by ip6_rt_cache_alloc() for each packet sent. This quickly consumes the Ipv6 max_size threshold which defaults to 4096 resulting in these warnings:
[1] 99.187805] dst_alloc: 7728 callbacks suppressed
[2] Route cache is full: consider increasing sysctl net.ipv6.route.max_size. .
.
[300] Route cache is full: consider increasing sysctl net.ipv6.route.max_size.
When this happens the packet is dropped and sendto() gets a network is unreachable error:
remaining pkt 200557 errno 101
remaining pkt 196462 errno 101
.
.
remaining pkt 126821 errno 101
Implement David Aherns suggestion to remove max_size check seeing that Ipv6 has a GC to manage memory usage. Ipv4 already does not check max_size.
Here are some memory comparisons for Ipv4 vs Ipv6 with the patch:
Test by running 5 instances of a program that sends UDP packets to a raw socket 5000000 times. Compare Ipv4 and Ipv6 performance with a similar program.
Ipv4:
Before test:
MemFree: 29427108 kB Slab: 237612 kB
ip6_dst_cache 1912 2528 256 32 2 : tunables 0 0 0 xfrm_dst_cache 0 0 320 25 2 : tunables 0 0 0 ip_dst_cache 2881 3990 192 42 2 : tunables 0 0 0
During test:
MemFree: 29417608 kB Slab: 247712 kB
ip6_dst_cache 1912 2528 256 32 2 : tunables 0 0 0 xfrm_dst_cache 0 0 320 25 2 : tunables 0 0 0 ip_dst_cache 44394 44394 192 42 2 : tunables 0 0 0
After test:
MemFree: 29422308 kB Slab: 238104 kB
ip6_dst_cache 1912 2528 256 32 2 : tunables 0 0 0 xfrm_dst_cache 0 0 320 25 2 : tunables 0 0 0 ip_dst_cache 3048 4116 192 42 2 : tunables 0 0 0
Ipv6 with patch:
Errno 101 errors are not observed anymore with the patch.
Before test:
MemFree: 29422308 kB Slab: 238104 kB
ip6_dst_cache 1912 2528 256 32 2 : tunables 0 0 0 xfrm_dst_cache 0 0 320 25 2 : tunables 0 0 0 ip_dst_cache 3048 4116 192 42 2 : tunables 0 0 0
During Test:
MemFree: 29431516 kB Slab: 240940 kB
ip6_dst_cache 11980 12064 256 32 2 : tunables 0 0 0 xfrm_dst_cache 0 0 320 25 2 : tunables 0 0 0 ip_dst_cache 3048 4116 192 42 2 : tunables 0 0 0
After Test:
MemFree: 29441816 kB Slab: 238132 kB
ip6_dst_cache 1902 2432 256 32 2 : tunables 0 0 0 xfrm_dst_cache 0 0 320 25 2 : tunables 0 0 0 ip_dst_cache 3048 4116 192 42 2 : tunables 0 0 0
--- include/net/dst_ops.h | 2 +- net/core/dst.c | 8 ++------ net/ipv6/route.c | 13 +++++-------- 3 files changed, 8 insertions(+), 15 deletions(-)
include/net/dst_ops.h +1 -1
@@ -16,7 +16,7 @@ struct dst_ops {unsigned short family;unsigned int gc_thresh; -int (*gc)(struct dst_ops *ops); +void (*gc)(struct dst_ops *ops);struct dst_entry * (*check)(struct dst_entry *,__u32 cookie);unsigned int (*default_advmss)(const struct dst_entry *);unsigned int (*mtu)(const struct dst_entry *);
net/core/dst.c +2 -6
@@ -82,12 +82,8 @@ void *dst_alloc(struct dst_ops *ops, strif (ops->gc && !(flags &DST_NOCOUNT ) && -dst_entries_get_fast (ops) > ops->gc_thresh) { -if (ops->gc (ops)) { -pr_notice_ratelimited ("Route cache is full: consider increasing sysctl net.ipv6.route.max_size.\n" ); -return NULL ; - } - } +dst_entries_get_fast (ops) > ops->gc_thresh) + ops->gc (ops); dst =kmem_cache_alloc (ops->kmem_cachep,GFP_ATOMIC );if (!dst)
net/ipv6/route.c +5 -8
@@ -91,7 +91,7 @@ static struct dst_entry *ip6_negative_adstatic void ip6_dst_destroy (struct dst_entry *);static void ip6_dst_ifdown (struct dst_entry *,struct net_device *dev,int how); -static int ip6_dst_gc (struct dst_ops *ops); +static void ip6_dst_gc (struct dst_ops *ops);static int ip6_pkt_discard (struct sk_buff *skb);static int ip6_pkt_discard_out (struct net *net,struct sock *sk,struct sk_buff *skb);
@@ -3295,11 +3295,10 @@ out:return dst; } -static int ip6_dst_gc (struct dst_ops *ops) +static void ip6_dst_gc (struct dst_ops *ops) { struct net *net = container_of(ops, struct net, ipv6.ip6_dst_ops);int rt_min_interval = net->ipv6.sysctl.ip6_rt_gc_min_interval; -int rt_max_size = net->ipv6.sysctl.ip6_rt_max_size;int rt_elasticity = net->ipv6.sysctl.ip6_rt_gc_elasticity;int rt_gc_timeout = net->ipv6.sysctl.ip6_rt_gc_timeout;unsigned long rt_last_gc = net->ipv6.ip6_rt_last_gc;
@@ -3307,11 +3306,10 @@ static int ip6_dst_gc(struct dst_ops *opint entries; entries =dst_entries_get_fast (ops); -if (entries > rt_max_size) +if (entries > ops->gc_thresh) entries =dst_entries_get_slow (ops); -if (time_after (rt_last_gc + rt_min_interval, jiffies) && - entries <= rt_max_size) +if (time_after (rt_last_gc + rt_min_interval, jiffies)) goto out;fib6_run_gc (atomic_inc_return (&net->ipv6.ip6_rt_gc_expire), net, true);
@@ -3321,7 +3319,6 @@ static int ip6_dst_gc(struct dst_ops *op out: val =atomic_read (&net->ipv6.ip6_rt_gc_expire);atomic_set (&net->ipv6.ip6_rt_gc_expire, val - (val >> rt_elasticity)); -return entries > rt_max_size; } static int ip6_nh_lookup_table(struct net *net, struct fib6_config *cfg,
@@ -6528,7 +6525,7 @@ static int __net_init ip6_route_net_init#endif net->ipv6.sysctl.flush_delay =0 ; - net->ipv6.sysctl.ip6_rt_max_size =4096 ; + net->ipv6.sysctl.ip6_rt_max_size =INT_MAX ; net->ipv6.sysctl.ip6_rt_gc_min_interval =HZ /2 ; net->ipv6.sysctl.ip6_rt_gc_timeout =60 *HZ ; net->ipv6.sysctl.ip6_rt_gc_interval =30 *HZ ;
Greg Kroah-Hartman
maintainerPATCH 54/59 perf inject: Fix GEN_ELF_TEXT_OFFSET for jit
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Adrian Hunter <[email protected]>
commit 89b15d00527b7825ff19130ed83478e80e3fae99 upstream.
When a program header was added, it moved the text section but GEN_ELF_TEXT_OFFSET was not updated.
Fix by adding the program header size and aligning.
--- tools/perf/util/genelf.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
tools/perf/util/genelf.h +3 -1
@@ -2,6 +2,8 @@#ifndef __GENELF_H__#define __GENELF_H__ +#include <linux/kernel.h> +/* genelf.c */ int jit_write_elf(int fd, uint64_t code_addr, const char *sym, const void *code, int csize, void *debug, int nr_debug_entries,
@@ -73,6 +75,6 @@ int jit_add_debug_info(Elf *e, uint64_t#endif /* The .text section is directly after the ELF header */ -#define GEN_ELF_TEXT_OFFSET sizeof(Elf_Ehdr) +#define GEN_ELF_TEXT_OFFSET round_up(sizeof(Elf_Ehdr) + sizeof(Elf_Phdr), 16)#endif
Greg Kroah-Hartman
maintainerPATCH 55/59 netfilter: nf_tables: Reject tables of unsupported family
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Phil Sutter <[email protected]>
commit f1082dd31fe461d482d69da2a8eccfeb7bf07ac2 upstream.
An nftables family is merely a hollow container, its family just a number and such not reliant on compile-time options other than nftables support itself. Add an artificial check so attempts at using a family the kernel can't support fail as early as possible. This helps user space detect kernels which lack e.g. NFPROTO_INET.
--- net/netfilter/nf_tables_api.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+)
net/netfilter/nf_tables_api.c +27 -0
@@ -1247,6 +1247,30 @@ static int nft_objname_hash_cmp(struct rreturn strcmp (obj->key.name, k->name); } +static bool nft_supported_family (u8 family) +{ + return false +#ifdef CONFIG_NF_TABLES_INET + || family ==NFPROTO_INET +#endif +#ifdef CONFIG_NF_TABLES_IPV4 + || family ==NFPROTO_IPV4 +#endif +#ifdef CONFIG_NF_TABLES_ARP + || family ==NFPROTO_ARP +#endif +#ifdef CONFIG_NF_TABLES_NETDEV + || family == NFPROTO_NETDEV +#endif +#if IS_ENABLED(CONFIG_NF_TABLES_BRIDGE) + || family ==NFPROTO_BRIDGE +#endif +#ifdef CONFIG_NF_TABLES_IPV6 + || family ==NFPROTO_IPV6 +#endif + ; +} +static int nf_tables_newtable (struct sk_buff *skb,const struct nfnl_info *info,const struct nlattr *const nla[]) {
@@ -1261,6 +1285,9 @@ static int nf_tables_newtable(struct sk_u32 flags =0 ;int err; +if (!nft_supported_family (family)) +return -EOPNOTSUPP ; +lockdep_assert_held (&nft_net->commit_mutex); attr = nla[NFTA_TABLE_NAME ]; table = nft_table_lookup(net, attr, family, genmask,
Greg Kroah-Hartman
maintainerPATCH 56/59 kallsyms: Make module_kallsyms_on_each_symbol generally available
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiri Olsa <[email protected]>
commit 73feb8d5fa3b755bb51077c0aabfb6aa556fd498 upstream.
Making module_kallsyms_on_each_symbol generally available, so it can be used outside CONFIG_LIVEPATCH option in following changes.
Rather than adding another ifdef option let's make the function generally available (when CONFIG_KALLSYMS and CONFIG_MODULES options are defined).
Stable-dep-of: 926fe783c8a6 ("tracing/kprobes: Fix symbol counting logic by looking at modules as well")
--- include/linux/module.h | 9 +++++++++ kernel/module.c | 2 -- 2 files changed, 9 insertions(+), 2 deletions(-)
include/linux/module.h +9 -0
@@ -867,8 +867,17 @@ static inline bool module_sig_ok(struct }#endif /* CONFIG_MODULE_SIG */ +#if defined(CONFIG_MODULES ) && defined(CONFIG_KALLSYMS )int module_kallsyms_on_each_symbol (int (*fn)(void *,const char *,struct module *,unsigned long ),void *data); +#else +static inline int module_kallsyms_on_each_symbol (int (*fn)(void *,const char *, +struct module *,unsigned long ), +void *data) +{ +return -EOPNOTSUPP ; +} +#endif /* CONFIG_MODULES && CONFIG_KALLSYMS */ #endif /* _LINUX_MODULE_H */
kernel/module.c +0 -2
@@ -4482,7 +4482,6 @@ unsigned long module_kallsyms_lookup_namreturn ret; } -#ifdef CONFIG_LIVEPATCH int module_kallsyms_on_each_symbol (int (*fn)(void *,const char *,struct module *,unsigned long ),void *data)
@@ -4514,7 +4513,6 @@ out:mutex_unlock (&module_mutex); return ret; } -#endif /* CONFIG_LIVEPATCH */ #endif /* CONFIG_KALLSYMS */ static void cfi_init (struct module *mod)
Greg Kroah-Hartman
maintainerPATCH 57/59 tracing/kprobes: Fix symbol counting logic by looking at modules as well
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrii Nakryiko <[email protected]>
commit 926fe783c8a64b33997fec405cf1af3e61aed441 upstream.
Recent changes to count number of matching symbols when creating a kprobe event failed to take into account kernel modules. As such, it breaks kprobes on kernel module symbols, by assuming there is no match.
Fix this my calling module_kallsyms_on_each_symbol() in addition to kallsyms_on_each_match_symbol() to perform a proper counting.
--- kernel/trace/trace_kprobe.c | 2 ++ 1 file changed, 2 insertions(+)
kernel/trace/trace_kprobe.c +2 -0
@@ -735,6 +735,8 @@ static unsigned int number_of_same_symbokallsyms_on_each_symbol (count_symbols, &args); +module_kallsyms_on_each_symbol (count_symbols, &args); +return args.count; }
Greg Kroah-Hartman
maintainerPATCH 58/59 net: usb: ax88179_178a: remove redundant init code
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Justin Chen <[email protected]>
commit 9718f9ce5b86e2f4e6364762018980f0222c2e5e upstream.
Bind and reset are basically doing the same thing. Remove the duplicate code and have bind call into reset.
--- drivers/net/usb/ax88179_178a.c | 85 +---------------------------------------- 1 file changed, 4 insertions(+), 81 deletions(-)
drivers/net/usb/ax88179_178a.c +4 -81
@@ -164,6 +164,8 @@#define GMII_PHY_PGSEL_PAGE3 0x0003#define GMII_PHY_PGSEL_PAGE5 0x0005 +static int ax88179_reset (struct usbnet *dev); +struct ax88179_data {u8 eee_enabled;u8 eee_active;
@@ -1308,47 +1310,12 @@ static void ax88179_get_mac_addr(structstatic int ax88179_bind (struct usbnet *dev,struct usb_interface *intf) { -u8 buf[5 ]; -u16 *tmp16; -u8 *tmp;struct ax88179_data *ax179_data = (struct ax88179_data *)dev->data; -struct ethtool_eee eee_data;usbnet_get_endpoints (dev, intf); - tmp16 = (u16 *)buf; - tmp = (u8 *)buf; -memset (ax179_data,0 ,sizeof (*ax179_data)); -/* Power up ethernet PHY */ - *tmp16 =0 ; -ax88179_write_cmd (dev,AX_ACCESS_MAC ,AX_PHYPWR_RSTCTL ,2 ,2 , tmp16); - *tmp16 =AX_PHYPWR_RSTCTL_IPRL ; -ax88179_write_cmd (dev,AX_ACCESS_MAC ,AX_PHYPWR_RSTCTL ,2 ,2 , tmp16); -msleep (200 ); - - *tmp =AX_CLK_SELECT_ACS |AX_CLK_SELECT_BCS ; -ax88179_write_cmd (dev,AX_ACCESS_MAC ,AX_CLK_SELECT ,1 ,1 , tmp); -msleep (100 ); - -/* Read MAC address from DTB or asix chip */ -ax88179_get_mac_addr (dev); -memcpy (dev->net->perm_addr, dev->net->dev_addr,ETH_ALEN ); - -/* RX bulk configuration */ -memcpy (tmp, &AX88179_BULKIN_SIZE [0 ],5 ); -ax88179_write_cmd (dev,AX_ACCESS_MAC ,AX_RX_BULKIN_QCTRL ,5 ,5 , tmp); - - dev->rx_urb_size =1024 *20 ; - - *tmp =0x34 ; -ax88179_write_cmd (dev,AX_ACCESS_MAC ,AX_PAUSE_WATERLVL_LOW ,1 ,1 , tmp); - - *tmp =0x52 ; -ax88179_write_cmd (dev,AX_ACCESS_MAC ,AX_PAUSE_WATERLVL_HIGH , -1 ,1 , tmp); - dev->net->netdev_ops = &ax88179_netdev_ops; dev->net->ethtool_ops = &ax88179_ethtool_ops; dev->net->needed_headroom =8 ;
@@ -1369,46 +1336,7 @@ static int ax88179_bind(struct usbnet *d dev->net->hw_features |=NETIF_F_IP_CSUM |NETIF_F_IPV6_CSUM |NETIF_F_RXCSUM ; -/* Enable checksum offload */ - *tmp =AX_RXCOE_IP |AX_RXCOE_TCP |AX_RXCOE_UDP | -AX_RXCOE_TCPV6 |AX_RXCOE_UDPV6 ; -ax88179_write_cmd (dev,AX_ACCESS_MAC ,AX_RXCOE_CTL ,1 ,1 , tmp); - - *tmp =AX_TXCOE_IP |AX_TXCOE_TCP |AX_TXCOE_UDP | -AX_TXCOE_TCPV6 |AX_TXCOE_UDPV6 ; -ax88179_write_cmd (dev,AX_ACCESS_MAC ,AX_TXCOE_CTL ,1 ,1 , tmp); - -/* Configure RX control register => start operation */ - *tmp16 =AX_RX_CTL_DROPCRCERR |AX_RX_CTL_IPE |AX_RX_CTL_START | -AX_RX_CTL_AP |AX_RX_CTL_AMALL |AX_RX_CTL_AB ; -ax88179_write_cmd (dev,AX_ACCESS_MAC ,AX_RX_CTL ,2 ,2 , tmp16); - - *tmp =AX_MONITOR_MODE_PMETYPE |AX_MONITOR_MODE_PMEPOL | -AX_MONITOR_MODE_RWMP ; -ax88179_write_cmd (dev,AX_ACCESS_MAC ,AX_MONITOR_MOD ,1 ,1 , tmp); - -/* Configure default medium type => giga */ - *tmp16 =AX_MEDIUM_RECEIVE_EN |AX_MEDIUM_TXFLOW_CTRLEN | -AX_MEDIUM_RXFLOW_CTRLEN |AX_MEDIUM_FULL_DUPLEX | -AX_MEDIUM_GIGAMODE ; -ax88179_write_cmd (dev,AX_ACCESS_MAC ,AX_MEDIUM_STATUS_MODE , -2 ,2 , tmp16); - -ax88179_led_setting (dev); - - ax179_data->eee_enabled =0 ; - ax179_data->eee_active =0 ; - -ax88179_disable_eee (dev); - -ax88179_ethtool_get_eee (dev, &eee_data); - eee_data.advertised =0 ; -ax88179_ethtool_set_eee (dev, &eee_data); - -/* Restart autoneg */ -mii_nway_restart (&dev->mii); - -usbnet_link_change (dev,0 ,0 ); +ax88179_reset (dev);return 0 ; }
@@ -1697,6 +1625,7 @@ static int ax88179_reset(struct usbnet */* Read MAC address from DTB or asix chip */ ax88179_get_mac_addr (dev); +memcpy (dev->net->perm_addr, dev->net->dev_addr,ETH_ALEN );/* RX bulk configuration */ memcpy (tmp, &AX88179_BULKIN_SIZE [0 ],5 );
@@ -1711,12 +1640,6 @@ static int ax88179_reset(struct usbnet *ax88179_write_cmd (dev,AX_ACCESS_MAC ,AX_PAUSE_WATERLVL_HIGH ,1 ,1 , tmp); - dev->net->features |=NETIF_F_IP_CSUM |NETIF_F_IPV6_CSUM | -NETIF_F_RXCSUM ; - - dev->net->hw_features |=NETIF_F_IP_CSUM |NETIF_F_IPV6_CSUM | -NETIF_F_RXCSUM ; -/* Enable checksum offload */ *tmp =AX_RXCOE_IP |AX_RXCOE_TCP |AX_RXCOE_UDP |AX_RXCOE_TCPV6 |AX_RXCOE_UDPV6 ;
Greg Kroah-Hartman
maintainerPATCH 59/59 net: usb: ax88179_178a: move priv to driver_priv
In reply to Greg Kroah-Hartman5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Justin Chen <[email protected]>
commit 2bcbd3d8a7b4525cdb741fe82330edb6f5452c7f upstream.
We need more space to save WoL context. So lets allocate memory for ax88179_data instead of using struct usbnet data field which only supports 5 words. We continue to use the struct usbnet data field for multicast filters. However since we no longer have the private data stored there, we can shift it to the beginning.
--- drivers/net/usb/ax88179_178a.c | 32 +++++++++++++++++++------------- 1 file changed, 19 insertions(+), 13 deletions(-)
drivers/net/usb/ax88179_178a.c +19 -13
@@ -170,7 +170,6 @@ struct ax88179_data {u8 eee_enabled;u8 eee_active;u16 rxctl; -u16 reserved;u8 in_pm;u32 wol_supported;u32 wolopts;
@@ -193,14 +192,14 @@ static const struct {static void ax88179_set_pm_mode (struct usbnet *dev,bool pm_mode) { -struct ax88179_data *ax179_data = (struct ax88179_data *)dev->data; +struct ax88179_data *ax179_data = dev->driver_priv; ax179_data->in_pm = pm_mode; }static int ax88179_in_pm (struct usbnet *dev) { -struct ax88179_data *ax179_data = (struct ax88179_data *)dev->data; +struct ax88179_data *ax179_data = dev->driver_priv;return ax179_data->in_pm; }
@@ -733,7 +732,7 @@ ax88179_ethtool_set_eee(struct usbnet *dstatic int ax88179_chk_eee (struct usbnet *dev) {struct ethtool_cmd ecmd = { .cmd =ETHTOOL_GSET }; -struct ax88179_data *priv = (struct ax88179_data *)dev->data; +struct ax88179_data *priv = dev->driver_priv;mii_ethtool_gset (&dev->mii, &ecmd);
@@ -836,7 +835,7 @@ static void ax88179_enable_eee(struct usstatic int ax88179_get_eee (struct net_device *net,struct ethtool_eee *edata) {struct usbnet *dev =netdev_priv (net); -struct ax88179_data *priv = (struct ax88179_data *)dev->data; +struct ax88179_data *priv = dev->driver_priv; edata->eee_enabled = priv->eee_enabled; edata->eee_active = priv->eee_active;
@@ -847,7 +846,7 @@ static int ax88179_get_eee(struct net_destatic int ax88179_set_eee (struct net_device *net,struct ethtool_eee *edata) {struct usbnet *dev =netdev_priv (net); -struct ax88179_data *priv = (struct ax88179_data *)dev->data; +struct ax88179_data *priv = dev->driver_priv;int ret; priv->eee_enabled = edata->eee_enabled;
@@ -898,8 +897,8 @@ static const struct ethtool_ops ax88179_static void ax88179_set_multicast (struct net_device *net) {struct usbnet *dev =netdev_priv (net); -struct ax88179_data *data = (struct ax88179_data *)dev->data; -u8 *m_filter = ((u8 *)dev->data) +12 ; +struct ax88179_data *data = dev->driver_priv; +u8 *m_filter = ((u8 *)dev->data); data->rxctl = (AX_RX_CTL_START |AX_RX_CTL_AB |AX_RX_CTL_IPE );
@@ -911,7 +910,7 @@ static void ax88179_set_multicast(struct }else if (netdev_mc_empty (net)) {/* just broadcast and directed */ }else { -/* We use the 20 byte dev->data for our 8 byte filter buffer +/* We use dev->data for our 8 byte filter buffer * to avoid allocating memory that is tricky to free later */ u32 crc_bits;
@@ -1310,11 +1309,15 @@ static void ax88179_get_mac_addr(structstatic int ax88179_bind (struct usbnet *dev,struct usb_interface *intf) { -struct ax88179_data *ax179_data = (struct ax88179_data *)dev->data; +struct ax88179_data *ax179_data;usbnet_get_endpoints (dev, intf); -memset (ax179_data,0 ,sizeof (*ax179_data)); + ax179_data =kzalloc (sizeof (*ax179_data),GFP_KERNEL ); +if (!ax179_data) +return -ENOMEM ; + + dev->driver_priv = ax179_data; dev->net->netdev_ops = &ax88179_netdev_ops; dev->net->ethtool_ops = &ax88179_ethtool_ops;
@@ -1343,6 +1346,7 @@ static int ax88179_bind(struct usbnet *dstatic void ax88179_unbind (struct usbnet *dev,struct usb_interface *intf) { +struct ax88179_data *ax179_data = dev->driver_priv;u16 tmp16;/* Configure RX control register => stop operation */
@@ -1355,6 +1359,8 @@ static void ax88179_unbind(struct usbnet/* Power down ethernet PHY */ tmp16 =0 ;ax88179_write_cmd (dev,AX_ACCESS_MAC ,AX_PHYPWR_RSTCTL ,2 ,2 , &tmp16); + +kfree (ax179_data); } static void
@@ -1527,7 +1533,7 @@ ax88179_tx_fixup(struct usbnet *dev, strstatic int ax88179_link_reset (struct usbnet *dev) { -struct ax88179_data *ax179_data = (struct ax88179_data *)dev->data; +struct ax88179_data *ax179_data = dev->driver_priv;u8 tmp[5 ], link_sts;u16 mode, tmp16, delay =HZ /10 ;u32 tmp32 =0x40000000 ;
@@ -1602,7 +1608,7 @@ static int ax88179_reset(struct usbnet *u8 buf[5 ];u16 *tmp16;u8 *tmp; -struct ax88179_data *ax179_data = (struct ax88179_data *)dev->data; +struct ax88179_data *ax179_data = dev->driver_priv;struct ethtool_eee eee_data; tmp16 = (u16 *)buf;
Hello,
Quoted 5 lines · On Sat, 13 Jan 2024 10:49:31 +0100 Greg Kroah-Hartman…
This is the start of the stable review cycle for the 5.15.147 release. There are 59 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Quoted 8 lines
Responses should be made by Mon, 15 Jan 2024 09:41:55 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.147-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-5.15.y
and the diffstat can be found below.
This rc kernel passes DAMON functionality test[1] on my test machine. Attaching the test results summary below. Please note that I retrieved the kernel from linux-stable-rc tree[2].
[1] https://github.com/awslabs/damon-tests/tree/next/corr
[2] f40fefd14722 ("Linux 5.15.147-rc1")
Thanks,
SJ
[...]
---
ok 1 selftests: damon: debugfs_attrs.sh
ok 1 selftests: damon-tests: kunit.sh
ok 2 selftests: damon-tests: huge_count_read_write.sh
ok 3 selftests: damon-tests: buffer_overflow.sh
ok 4 selftests: damon-tests: rm_contexts.sh
ok 5 selftests: damon-tests: record_null_deref.sh
ok 6 selftests: damon-tests: dbgfs_target_ids_read_before_terminate_race.sh ok 7 selftests: damon-tests: dbgfs_target_ids_pid_leak.sh
ok 8 selftests: damon-tests: damo_tests.sh
ok 9 selftests: damon-tests: masim-record.sh
ok 10 selftests: damon-tests: build_i386.sh
ok 11 selftests: damon-tests: build_arm64.sh
ok 12 selftests: damon-tests: build_m68k.sh
ok 13 selftests: damon-tests: build_i386_idle_flag.sh
ok 14 selftests: damon-tests: build_i386_highpte.sh
ok 15 selftests: damon-tests: build_nomemcg.sh
[33m
[92mPASS [39m
Quoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.15.147 release. There are 59 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Mon, 15 Jan 2024 09:41:55 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.147-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-5.15.y
and the diffstat can be found below.thanks,
greg k-h
Built and booted successfully on RISC-V RV64 (HiFive Unmatched).
Quoted 10 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.15.147 release. There are 59 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Mon, 15 Jan 2024 09:41:55 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.147-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-5.15.y
and the diffstat can be found below.thanks,
greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
## Build
* kernel: 5.15.147-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.15.y
* git commit: f40fefd14722e8606bc4d5c3b52e22bc8d5ea362
* git describe: v5.15.146-60-gf40fefd14722
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.15.y/build/v5.15.146-60-gf40fefd14722/
## Test Regressions (compared to v5.15.145)
## Metric Regressions (compared to v5.15.145)
## Test Fixes (compared to v5.15.145)
## Metric Fixes (compared to v5.15.145)
## Test result summary
total: 175918, pass: 139063, fail: 4306, skip: 32380, xfail: 169
## Build Summary
* arc: 5 total, 5 passed, 0 failed
* arm: 117 total, 117 passed, 0 failed
* arm64: 44 total, 44 passed, 0 failed
* i386: 33 total, 33 passed, 0 failed
* mips: 24 total, 24 passed, 0 failed
* parisc: 4 total, 4 passed, 0 failed
* powerpc: 26 total, 26 passed, 0 failed
* riscv: 11 total, 11 passed, 0 failed
* s390: 11 total, 11 passed, 0 failed
* sh: 10 total, 10 passed, 0 failed
* sparc: 8 total, 8 passed, 0 failed
* x86_64: 38 total, 38 passed, 0 failed
## Test suites summary
* boot
* kselftest-android
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers-dma-buf
* kselftest-efivarfs
* kselftest-exec
* kselftest-filesystems
* kselftest-filesystems-binderfs
* kselftest-filesystems-epoll
* kselftest-firmware
* kselftest-fpu
* kselftest-ftrace
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-net-forwarding
* kselftest-net-mptcp
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-user_events
* kselftest-vDSO
* kselftest-vm
* kselftest-watchdog
* kselftest-x86
* kselftest-zram
* kunit
* libgpiod
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* network-basic-tests
* perf
* rcutorture
* v4l2-compliance
--
Linaro LKFT
https://lkft.linaro.org
Quoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.15.147 release. There are 59 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Mon, 15 Jan 2024 09:41:55 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.147-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-5.15.y
and the diffstat can be found below.thanks,
greg k-h
All tests passing for Tegra ...
Test results for stable-v5.15:
10 builds: 10 pass, 0 fail
26 boots: 26 pass, 0 fail
102 tests: 102 pass, 0 failLinux version: 5.15.147-rc1-gf40fefd14722
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
tegra20-ventana, tegra210-p2371-2180,
tegra210-p3450-0000, tegra30-cardhu-a04Jon
Quoted 5 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.15.147 release. There are 59 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Quoted 9 lines
Responses should be made by Mon, 15 Jan 2024 09:41:55 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.147-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-5.15.y
and the diffstat can be found below.
KernelCI report for stable-rc/linux-5.15.y for this week :-
## stable-rc HEAD for linux-5.15.y:
Date: 2024-01-13
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/log/?h=f40fefd14722e8606bc4d5c3b52e22bc8d5ea362
## Build failures:
No build failures seen for the stable-rc/linux-5.15.y commit head \o/
## Boot failures:
No **new** boot failures seen for the stable-rc/linux-5.15.y commit head \o/
Thanks,
Shreeya Patel
Hi Greg,
Quoted 8 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.15.147 release. There are 59 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Mon, 15 Jan 2024 09:41:55 +0000. Anything received after that time might be too late.
No problems seen on x86_64 and aarch64 with our testing.
Thanks,
Harshit
Quoted 10 lines
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.147-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-5.15.y
and the diffstat can be found below.thanks,
greg k-h
Quoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.15.147 release. There are 59 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Mon, 15 Jan 2024 09:41:55 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.147-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-5.15.y
and the diffstat can be found below.thanks,
greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on BMIPS_GENERIC:
Signature · 1 line
Florian
Quoted 9 lines
This is the start of the stable review cycle for the 5.15.147 release. There are 59 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Mon, 15 Jan 2024 09:41:55 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 9 lines
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.147-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-5.15.y
and the diffstat can be found below.thanks,
greg k-h
Compiled and booted on my x86_64 and ARM64 test systems. No errors or regressions.
Thanks.